Best Jack For Gooseneck Trailer: 10 Options Compared

Best Jack For Gooseneck Trailer

A strong gooseneck trailer jack should match the trailer’s mounting layout and lifting needs, with enough capacity and travel for your hookup and parking routine. The Johnson Trailer Parts Dexter kit leads this roundup with two 12,000-lb hydraulic jacks and synchronized operation, while the EQ Systems model is specifically described for gooseneck trailers with living quarters. For a manual weld-on setup, the BaVekHak offers a stated 12,000-lb capacity and 26 inches of total travel.

These options are not interchangeable: some are hydraulic kits, others are single-leg jacks, and mounting methods differ. Compare the trailer’s required support load, frame location, lift range, and installation method before choosing.

The products below are ranked by their stated gooseneck suitability first, followed by capacity and useful operating details.

The Johnson Trailer Parts Dexter Kit is the leading choice for buyers who need a gooseneck-specific system with substantial stated lifting capacity. It includes two 12,000-lb hydraulic jacks, a double-acting KTI pump, and a flow divider for synchronized operation, for a listed total capacity of 24,000 lb. If you need a single center-tube jack for a gooseneck with living quarters, consider the EQ Systems 1/24 instead; it is described for that fit but has an 8,000-lb capacity.

Our Top Picks

Johnson Dexter Hydraulic KitBest Overall

Johnson Dexter Hydraulic Kit

Designed for gooseneck trailers, this kit pairs two 12,000-lb jacks with a double-acting pump and flow divider for synchronized operation.

View on Amazon
EQ Systems 1/24 Hydraulic JackBest Center-Tube Fit

EQ Systems 1/24 Hydraulic Jack

Specifically designed to bolt onto a gooseneck center tube and described for living quarters up to an 11-foot short wall; capacity is 8,000 lb.

View on Amazon
BaVekHak 12,000-lb Weld-On JackBest Manual Travel

BaVekHak 12,000-lb Weld-On Jack

Its listing explicitly names gooseneck trailers, with 12,000-lb static capacity, a 4-inch square tube, and 26 inches of total travel.

View on Amazon

Compare Gooseneck Trailer Jack Options

#ProductLoad CapacityMaterialCompatible with Vehicle TypeBuy
124,000 lbSteelTrailerView on Amazon
28,000 lbssteelGooseneck trailersView on Amazon
312000 lbsAlloy Steel, Cast IronATV, Car, RV, Trailer, UTVView on Amazon
4
VEVOR 12,000-lb Sidewind Jack4. VEVOR 12,000-lb Sidewind JackManual high-capacity hookups
5443 kgCarbon SteelRecreational Vehicle, Trailer, BoatView on Amazon
5
Kohree 12,000-lb Weld-On Jack5. Kohree 12,000-lb Weld-On JackAdjustable-height heavy trailers
12000 lbAlloy SteelHeavy Duty RV, Heavy Duty TrailerView on Amazon
612000 lbsAlloy SteelRV, Truck, VanView on Amazon
7
BEBLEPANY 12,000-lb Jack7. BEBLEPANY 12,000-lb JackDual-stage height adjustment
12000 lbAlloy SteelRVView on Amazon
8
REESE Pro Series Weld-On Jack8. REESE Pro Series Weld-On JackSidewind weld-on jack buyers
12000 lbStealTrailerView on Amazon
9
NBJINGYI Weld-On Square Jack9. NBJINGYI Weld-On Square JackPull-pin weld-on replacement
12000 lbIronTrailerView on Amazon
10
FZZD 12,000-lb Weld-On Jack10. FZZD 12,000-lb Weld-On JackWeld-on capacity-focused buyers
12000 lbAlloy SteelTrailerView on Amazon

Detailed Reviews: Best Jack For Gooseneck Trailer

Johnson Dexter Hydraulic Kit

#1 · Best Overall

1. Johnson Dexter Hydraulic Kit

  • Load Capacity: 24,000 lb
  • Material: Steel
  • Compatible with Vehicle Type: Trailer

Best for: Powered dual-jack lifting.

Why it ranks #1: Designed for gooseneck trailers, this kit pairs two 12,000-lb jacks with a double-acting pump and flow divider for synchronized operation.

Two 12,000-pound hydraulic jacks combine for a stated 24,000-pound lifting capacity, making this Dexter kit the powered, synchronized option in the roundup. A KTI double-acting pump provides push-button raising and lowering for dump, cargo, and gooseneck trailers, reducing reliance on individual manual cranking.

The KTI power unit is specified at 2 GPM and up to 3,200 PSI, while double-acting operation supports controlled movement in both directions. A flow divider distributes fluid evenly between the two jacks, helping them operate in sync instead of lifting independently. The kit includes hydraulic hoses, jack covers, and two 2-by-20-inch cylinders, so buyers receive a coordinated system; installation involves connecting the hydraulic components and power unit.

Pros
  • 24,000-pound combined lifting capacity
  • Two 12,000-pound hydraulic jacks
  • Double-acting power-up and power-down pump
  • Flow divider for synchronized operation
Cons
  • The dual-jack hydraulic setup requires hydraulic connections and a power unit.

Skip it if you want a simple hand-cranked single jack; BaVekHak's BAJY-TJ-55B uses screw travel and a drop leg instead.

This kit suits gooseneck, dump, or cargo trailer owners who want synchronized powered lifting from two jacks. The hydraulic pump and included hoses make it a system installation, so it is not the compact manual-jack choice.

Full product details
BrandJohnson Trailer Parts
ColorBlack
Compatible with Vehicle TypeTrailer
Included Components(1) 15′′ Rubber Strap, (1) Flow Divider Combo 2.5 GPM, (1) 32 oz Johnson Trailer Parts Mug, (1) Hydraulic Power Unit (HPU) Double Acting Pump (Power-Up / Power-Down), (2) 12,000 lb Trailer Jacks with 2′′x 20′′ Hydraulic Cylinder, (2) Jack Covers, (6) 48′′ Hydraulic Hose w/2 Straight #6 JIC Fittings, (1)
Load Capacity24,000 Pounds
ManufacturerPremium Supply
Part Number12K-HTJ
MaterialSteel
Model NumberPJD-12-20-K
Style Namehydraulic

Listed on Amazon as: Dexter 24,000 lb Hydraulic Trailer Jack Kit – Dual 12,000 lb Power Jacks – KTI Double Acting Pump – Electric Hydraulic – for Dump, Cargo & Gooseneck Trailers

View on Amazon
EQ Systems 1/24 Hydraulic Jack

#2 · Best Center-Tube Fit

2. EQ Systems 1/24 Hydraulic Jack

  • Load Capacity: 8,000 lbs
  • Material: steel
  • Compatible with Vehicle Type: Gooseneck trailers

Best for: Gooseneck living-quarters fit.

Why it ranks #2: Specifically designed to bolt onto a gooseneck center tube and described for living quarters up to an 11-foot short wall; capacity is 8,000 lb.

A 24-inch stroke and 8,000-pound capacity define this EQ Systems hydraulic jack for gooseneck trailers with living quarters up to an 11-foot short wall. Its single-leg, square-tube-in-tube construction and manual override screw drive give buyers hydraulic operation with a specified manual backup method.

The single-function pump and single-switch gear control support straightforward powered operation, while the manual override screw drive provides another way to operate the jack. A 24-inch stroke supplies the listed lifting range, and the 8,000-pound capacity is below the 12,000-pound ratings of several other jacks in this roundup. Universal mounting brackets and a center-tube bolt-on arrangement are described, making its fit particularly specific to the stated gooseneck application.

Pros
  • 8,000-pound capacity
  • 24-inch stroke
  • Manual override screw drive
  • Specified for goosenecks with living quarters up to an 11-foot short wall
Cons
  • Its 8,000-pound capacity is lower than the 12,000-pound-rated options.

Skip it if you need a 12,000-pound rating; REESE Pro Series 1400950376 lists that capacity with a sidewind crank.

This EQ Systems jack suits gooseneck owners whose living-quarters trailer is within the stated 11-foot short-wall application and who want hydraulic operation with manual override. Its 8,000-pound rating is the key capacity boundary.

Full product details
BrandEQ Systems
Compatible with Vehicle TypeGooseneck trailers
Load Capacity8,000 lbs
ManufacturerEQ Systems
Materialsteel

Listed on Amazon as: AJ 1/24 Hydraulic Trailer Jack with Manual Override Screw Drive

View on Amazon
BaVekHak 12,000-lb Weld-On Jack

#3 · Best Manual Travel

3. BaVekHak 12,000-lb Weld-On Jack

  • Load Capacity: 12000 lbs
  • Material: Alloy Steel, Cast Iron
  • Compatible with Vehicle Type: ATV, Car, RV, Trailer, UTV

Best for: Gooseneck trailer stabilizing.

Why it ranks #3: Its listing explicitly names gooseneck trailers, with 12,000-lb static capacity, a 4-inch square tube, and 26 inches of total travel.

A four-inch square outer tube gives the BaVekHak a concrete stability-focused feature for gooseneck, utility, and equipment trailers. Its 12,000-pound static-load rating and 26-inch dual-stage travel support front-end positioning during loading, parking, or storage, with a weld-on connection for a fixed installation.

The jack combines 12.5 inches of screw travel with a 13.5-inch drop leg, so buyers can use the drop leg for coarse height adjustment and the screw travel for finer positioning. A front pull pin supports that adjustment workflow, while the four-inch square tube is specified to reduce flex under load. The weld-on design creates a rigid permanent frame connection, so installation requires welding rather than a removable mount.

Pros
  • 12,000-pound static-load rating
  • Four-inch square outer tube
  • 26 inches of dual-stage travel
  • Front pull pin and weld-on design
Cons
  • Weld-on mounting is permanent and requires welding.

Skip it if you want push-button hydraulic operation; Johnson Trailer Parts' Dexter dual-jack kit uses an electric hydraulic pump for raising and lowering.

For gooseneck owners seeking a fixed front jack for loading, parking, and storage, the BaVekHak pairs substantial capacity with two-stage travel. Its weld-on installation is the boundary: it suits a permanent frame setup, not removable mounting.

Full product details
BrandBaVekHak
Colorblack
Compatible with Vehicle TypeATV, Car, RV, Trailer, UTV
Included ComponentsTrailer Jack
Item Dimensions26 x 11 x 7 inches
Item Weight25 pounds
Load Capacity12000 lbs
ManufacturerBaVekHak
Part NumberBAJY-TJ-55B
Manufacturer Warranty Description1 year
MaterialAlloy Steel, Cast Iron
Model NumberBAJY-TJ-55B
Style NameHydraulic

Listed on Amazon as: 12000 LBS Weld-On Trailer Jack, 4" Square Tube, 26" Travel, Front Pull Pin

View on Amazon
VEVOR 12,000-lb Sidewind Jack

#4

4. VEVOR 12,000-lb Sidewind Jack

  • Load Capacity: 5443 kg
  • Material: Carbon Steel
  • Compatible with Vehicle Type: Recreational Vehicle, Trailer, Boat

Best for: Manual high-capacity hookups.

Why it ranks #4: A heavy-duty manual option with 12,000-lb capacity, up to 26.5 inches of lift, and five mounting-height holes, though gooseneck fit is not specified.

A 12,000-pound rating paired with up to 26.5 inches of lift gives the VEVOR jack room to handle substantial trailer-height changes during hookups. Its sidewind crank keeps operation manual, while five pre-drilled holes let installers select a mounting height to suit the trailer setup.

The smooth screw drive and ergonomic handle support controlled hand-cranking, while the adjustable drop leg and five pre-drilled holes provide options for setting the jack height. Reinforced steel tubes with a powder-coated finish suit hard-use trailer work. At 61.3 pounds, it is a substantial component to position during installation, and its direct-weld mounting means the trailer frame needs a welded attachment rather than a quick clamp-on setup.

Pros
  • 12,000-pound load capacity
  • Up to 26.5 inches of lift
  • Five pre-drilled mounting-height holes
  • Reinforced steel tubes with powder-coated finish
Cons
  • Direct-weld mounting requires welding to the trailer.

Skip it if you need a jack that attaches without welding; FZZD's side-mounted model is also specified for weld-on installation.

For owners fitting a heavy-duty trailer jack permanently, the VEVOR combines hand-cranked lifting with adjustable mounting height. Its 12,000-pound rating suits substantial loads, but the direct-weld design and 61.3-pound weight make installation a planned workshop task.

Full product details
BrandVEVOR
ColorBlack
Compatible with Vehicle TypeRecreational Vehicle, Trailer, Boat
Included Components1 x Hand Crank (with mounting bolt, nut & washer), 1 x Trailer Jack (with Base), 1 x User Manual
Item Dimensions12.2 x 8.86 x 27.68 inches
Item Weight61.3 pounds
Load Capacity5443 kg
ManufacturerVEVOR
Part NumberJack, 12,000 lbs Load Capacity
MaterialCarbon Steel
Model NumberHS12000PTS
Style NameMechanical

Listed on Amazon as: VEVOR Heavy-Duty Trailer Jack, 12,000 lbs Load Capacity, Sidewind Square Direct Weld-on Trailer Jack with Handle Crank, Adjustable Drop Leg, 26-Inch Travel for Lifting RV, Utility, Yacht Trailers

View on Amazon
Kohree 12,000-lb Weld-On Jack

#5

5. Kohree 12,000-lb Weld-On Jack

  • Load Capacity: 12000 lb
  • Material: Alloy Steel
  • Compatible with Vehicle Type: Heavy Duty RV, Heavy Duty Trailer

Best for: Adjustable-height heavy trailers.

Why it ranks #5: Offers 12,000-lb capacity and a stated height range of 27.5 to 53.3 inches, useful when trailer height varies; gooseneck compatibility is not listed.

A listed height range of 27.5 to 53.3 inches gives the Kohree jack broad positioning flexibility for trailers of varying heights. Its 12,000-pound capacity, adjustable foot, and 26-inch vertical travel make it a manual weld-on option for owners prioritizing substantial lifting range and a stable base.

The adjustable, fixable foot helps accommodate different trailer heights, while the 26-inch vertical travel provides room for raising and lowering. Thickened square tubes, a large main gear, and an oversized foot plate are specified to support stable movement under load. Its high-strength steel construction supports heavy-duty use, and the included handle and hook are supplied with the jack. Weld-on mounting means fitting it requires a permanent trailer-frame attachment.

Pros
  • 12,000-pound load capacity
  • 26 inches of vertical travel
  • Adjustable height range of 27.5 to 53.3 inches
  • Oversized foot plate and thickened square tubes
Cons
  • Weld-on mounting requires a permanent welded trailer-frame attachment.

Skip it if you want an explicitly specified front pull-pin adjustment; BaVekHak's BAJY-TJ-55B lists a front pull pin and 26-inch dual-stage travel.

The Kohree fits owners who need a high-capacity manual jack with a broad stated height range for different trailer heights. Its adjustable foot adds flexibility, while the weld-on installation makes it a permanent rather than quick-removal choice.

Full product details
BrandKohree
ColorBlack
Compatible with Vehicle TypeHeavy Duty RV, Heavy Duty Trailer
Included ComponentsHandle x1, Hook x1, Trailer Jack x1
Item Dimensions29 x 14 x 8 inches
Item Weight55 pounds
Load Capacity12000 Pounds
ManufacturerKOHREE
Part NumberKR12810-KO-US-FBA
Manufacturer Warranty DescriptionKohree Service
MaterialAlloy Steel
Model NumberKR12810
Style NameHeavy Duty 12000 lbs

Listed on Amazon as: Kohree 12000 lbs Trailer Jack Heavy Duty, 26" Vertical Travel, Weld on

View on Amazon
Axiovate 12,000-lb Drop-Leg Jack

#6 · Best Drop-Leg Range

6. Axiovate 12,000-lb Drop-Leg Jack

  • Load Capacity: 12000 lbs
  • Material: Alloy Steel
  • Compatible with Vehicle Type: RV, Truck, Van

Best for: Uneven-ground manual leveling.

Why it ranks #6: Provides 12,000-lb capacity and 26 inches of vertical travel with an adjustable drop leg for leveling, but listed vehicle types do not include trailers.

An adjustable drop leg paired with 26 inches of vertical travel gives the Axiovate jack a practical way to reach trailer height across uneven terrain. Its 12,000-pound capacity and textured handle suit owners seeking a manually adjusted, high-capacity jack for large trailers, RVs, boats, or off-road vehicles.

The drop-leg design provides height adjustment across the stated 26-inch range, supporting precise leveling where the ground is uneven. A textured handle gives the user a gripping surface for manual height changes, while the reinforced base and high-strength steel construction are specified to promote stability during lifting. The supplied information lists no included components, so buyers should account for the jack itself without assuming that mounting hardware or an accessory kit comes with it.

Pros
  • 12,000-pound load capacity
  • 26 inches of vertical travel
  • Adjustable drop leg for uneven terrain
  • Textured handle and reinforced base
Cons
  • No included components are listed.

Skip it if you need a supplied handle and hook; Kohree's KR12810 listing includes both with its trailer jack.

For owners leveling a large trailer or RV on uneven ground, the Axiovate combines a drop leg, 26 inches of travel, and a textured manual handle. The listing specifies no included components, so accessory expectations matter.

Full product details
BrandAxiovate
ColorBlack
Compatible with Vehicle TypeRV, Truck, Van
Included Componentsno
Item Dimensions30.71 x 14.56 x 11.43 inches
Item Weight56 pounds
Load Capacity12000 lbs
ManufacturerAxiovate
Part NumberJST-QJD-90
MaterialAlloy Steel
Model NumberJST-QJD-90

Listed on Amazon as: 12000lbs Trailer Jack, Adjustable Drop Leg, 26" Vertical Travel

View on Amazon
BEBLEPANY 12,000-lb Jack

#7

7. BEBLEPANY 12,000-lb Jack

  • Load Capacity: 12000 lb
  • Material: Alloy Steel
  • Compatible with Vehicle Type: RV

Best for: Dual-stage height adjustment.

Why it ranks #7: Combines 12,000-lb capacity with 12.5 inches of screw travel and a 13.5-inch drop leg, although its listed vehicle compatibility is RV.

The BEBLEPANY jack combines 12.5 inches of screw travel with a 13.5-inch adjustable drop leg for 26 inches of total travel. That two-stage arrangement helps accommodate varying hitch heights and uneven terrain, while its 12,000-pound rating addresses heavy-duty trailer support during loading or storage.

The drop leg supplies coarse height adjustment, and the screw travel offers a further 12.5 inches of vertical movement for positioning. Together, those stages provide the listed 26-inch total, a useful range for different hitch heights. Its weld-on square-tube construction suits a permanent frame installation, and the sidewind format supports hand operation. The product is listed with a housing, while the supplied facts do not specify other included accessories, so buyers should avoid assuming a broader kit.

Pros
  • 12,000-pound load capacity
  • 12.5-inch screw travel
  • 13.5-inch adjustable drop leg
  • 26 inches of total travel
Cons
  • Weld-on mounting requires a permanent frame attachment.

Skip it if you need powered, synchronized lifting; Johnson Trailer Parts' Dexter kit includes two hydraulic jacks and a flow divider.

The BEBLEPANY is suited to owners who need a high-capacity sidewind jack with two-stage travel for varied hitch heights or uneven ground. Its weld-on mount fits permanent installations, not buyers seeking a removable assembly.

Full product details
BrandBEBLEPANY
ColorBlack
Compatible with Vehicle TypeRV
Included ComponentsComes with housing
Item Dimensions30.71 x 14.57 x 15.36 inches
Item Weight29.51 kg
Load Capacity12000 pounds
ManufacturerBEBLEPANY
Part NumberMYTJ-56B
Manufacturer Warranty Description1 year warranty
MaterialAlloy Steel
Model NumberMYTJ-56B
Style NameFixed

Listed on Amazon as: 12000 lbs Weld-On Square Tube Trailer Jack Heavy Duty Side Wind 26" Travel

View on Amazon
REESE Pro Series Weld-On Jack

#8

8. REESE Pro Series Weld-On Jack

  • Load Capacity: 12000 lb
  • Material: Steal
  • Compatible with Vehicle Type: Trailer

Best for: Sidewind weld-on jack buyers.

Why it ranks #8: A 12,000-lb sidewind model with 12.5 inches of travel and a one-year warranty; the listing describes general trailers rather than gooseneck fit.

A 12,000-pound capacity and sidewind crank give the REESE Pro Series jack a clear combination for manual lifting of trailers, boats, vehicles, and RVs. Its 12.5-inch travel and weld-on square-jack format suit owners seeking a fixed steel jack with quick hand adjustments.

The sidewind handle enables manual adjustments, and the stated 12.5-inch travel defines the jack's vertical movement. The listed retraction and extension dimensions are 28.25 and 54.25 inches, respectively, giving buyers additional height figures when planning the installation. Premium-steel construction and improved side-load strength are specified for lifting support. As a weld-on model with no mount listed, it requires a suitable welded attachment rather than an included mounting assembly.

Pros
  • 12,000-pound capacity
  • 12.5 inches of travel
  • Sidewind crank for manual adjustment
  • Premium-steel construction with improved side-load strength
Cons
  • No mounting assembly is listed; the jack is weld-on.

Skip it if you want a listed mount and pull pin included; NBJINGYI's 1BJY-TJ-55/56B specifies both with its weld-on jack.

The REESE Pro Series suits owners wanting a manual, sidewind jack with 12,000-pound capacity for a fixed trailer installation. Its weld-on format and lack of a listed mount make attachment planning important before purchase.

Full product details
BrandREESE
ColorGrey
Compatible with Vehicle TypeTrailer
Included ComponentsREESE Pro Series 1400950376 Weld On Trailer Jack, 12,000 lbs. Capacity
Item Weight16 ounces
Load Capacity12000 Pounds
ManufacturerPro Series
Part Number1400950376
Manufacturer Warranty Description1 year
MaterialSteal
Model Number1400950376
Style NameSquare Jack

Listed on Amazon as: REESE Pro Series 1400950376 Weld On Trailer Jack, 12,000 lbs. Capacity, Sidewind Crank, No Mount Square Jack Tube, 12-1/2 Inch Travel

View on Amazon
NBJINGYI Weld-On Square Jack

#9

9. NBJINGYI Weld-On Square Jack

  • Load Capacity: 12000 lb
  • Material: Iron
  • Compatible with Vehicle Type: Trailer

Best for: Pull-pin weld-on replacement.

Why it ranks #9: Its 12,000-lb capacity, crank handle, mating mount, and pull pin suit a manual trailer setup, but no gooseneck-specific compatibility is stated.

A mating mount and pull pin come with this 12,000-pound square-tube jack, giving buyers the mounting pieces and pin-based setup specified for installation. Its crank handle supports manual adjustment, while the weld-on design makes it a fixed jack choice for trailer owners seeking a permanent frame connection.

The square-tube construction and 12,000-pound rating suit heavy trailer lifting, and the included mating mount and pull pin provide the listed mounting and adjustment components. A crank handle allows manual height changes without relying on powered hydraulics. Black powder coating on both inner and outer tubes is specified as the finish. Because the jack is weld-on, fitting it calls for a welded trailer-frame attachment, a consideration for owners replacing a removable or bolt-on unit.

Pros
  • 12,000-pound capacity
  • Mating mount and pull pin included
  • Crank handle for manual adjustment
  • Powder-coated inner and outer tubes
Cons
  • Weld-on mounting requires a permanent welded attachment.

Skip it if you need listed vertical travel dimensions; BEBLEPANY's MYTJ-56B specifies 26 inches through screw travel and an adjustable drop leg.

This NBJINGYI suits trailer owners seeking a manual, weld-on square-tube jack with a mating mount and pull pin included. Its permanent installation is the key boundary, so it is not the pick for a removable jack setup.

Full product details
BrandNBJINGYI
ColorBlack
Compatible with Vehicle TypeTrailer
Item Dimensions29.92 x 16.34 x 11.02 inches
Item Weight26 kg
Load Capacity12000 Pounds
ManufacturerNBJINGYI
Part Number1BJY-TJ-55/56B
Manufacturer Warranty DescriptionONE YEAR
MaterialIron
Model Number1BJY-TJ-55/56B

Listed on Amazon as: 12000lbs Heavy-Duty Weld-On Square Tube Trailer Jack with Crank Handle

View on Amazon
FZZD 12,000-lb Weld-On Jack

#10

10. FZZD 12,000-lb Weld-On Jack

  • Load Capacity: 12000 lb
  • Material: Alloy Steel
  • Compatible with Vehicle Type: Trailer

Best for: Weld-on capacity-focused buyers.

Why it ranks #10: This side-mounted, weld-on jack has 12,000-lb capacity, but the listing only specifies trailer compatibility and gives no travel or gooseneck fit details.

A 12,000-pound lifting capacity is the FZZD jack's defining feature, giving trailer owners a high-capacity manual jack option for utility trailers, vehicles, boats, and RVs. Its side-mounted, weld-on installation suits buyers who want a fixed attachment rather than a jack intended to clamp onto a frame.

The alloy-steel construction and 12,000-pound rating make this a heavy-duty option for trailer lifting, while the side-mount arrangement specifies how it attaches: by welding to the trailer. That installation method calls for a suitable welding setup and a permanent mounting decision. The supplied information does not state travel range or a crank-handle feature, so buyers comparing lift reach or operating details should not assume those specifications from the capacity alone.

Pros
  • 12,000-pound lifting capacity
  • Alloy-steel construction
  • Side-mounted installation
  • Listed for utility trailers, vehicles, boats, and RVs
Cons
  • Weld-on installation requires a permanent welded mounting point.

Skip it if you need a stated travel range or crank specification; VEVOR's HS12000PTS lists up to 26.5 inches of lift and an ergonomic handle.

Choose the FZZD if your trailer needs a side-mounted, weld-on jack and its 12,000-pound rating matches the lifting task. It is a straightforward fit for buyers prioritizing capacity, but the supplied details leave travel and handle specifications unspecified.

Full product details
BrandFZZD
Color12000 lbs
Compatible with Vehicle TypeTrailer
Item Dimensions8.5 x 7.9 x 53.3 inches
Item Weight52.6 pounds
Load Capacity12000 pounds
ManufacturerFZZD
Part NumberHZ-FT-01
MaterialAlloy Steel
Model NumberHZ-FT-01
Style NameTongue Jack

Listed on Amazon as: 12000lbs Heavy Duty Trailer Jack,Square Direct Weld

View on Amazon

Avoid a mount-and-travel mismatch

A jack can have ample capacity and still fail to fit the trailer’s mounting point or provide enough usable lift. The EQ Systems 1/24 is described as mounting to a gooseneck center tube, while several other products are weld-on or side-mounted designs; those terms do not establish that their brackets or tubes match a particular frame. Check the trailer manufacturer’s mounting location and the jack’s mounting dimensions before buying.

Travel figures also describe different arrangements: the BaVekHak combines 12.5 inches of screw travel with a 13.5-inch drop leg for 26 inches total, while the REESE lists 12.5 inches of travel and separate retraction and extension measurements. Do not assume equal stated travel means equal clearance or operating height.

Confirm the jack can retract clear of the road and reach the needed hookup height on your trailer.

Understand capacity and operating trade-offs

A higher capacity is not automatically the right choice unless the jack arrangement and installation suit the trailer. The Johnson Dexter kit lists 24,000 lb across two hydraulic jacks and uses a flow divider for synchronized operation, while the EQ Systems unit is a single 8,000-lb hydraulic leg with manual override. Manual models such as the 12,000-lb BaVekHak rely on a crank, and several other 12,000-lb choices are also manual.

These are meaningful differences in operation, not proof that one is universally safer or faster. Check the trailer maker’s required support capacity and whether the rating applies to the intended lifting or static-support task; the BaVekHak listing specifically says static load.

Also verify the electrical and hydraulic installation requirements for a power system, since the supplied listing does not establish fitment or wiring for every trailer.

How to Choose a Gooseneck Trailer Jack

Gooseneck fit and mounting style

Look first for a jack whose stated mounting arrangement matches the trailer frame. The EQ Systems 1/24 is explicitly designed to bolt onto a gooseneck center tube, while the Johnson Dexter kit is described for gooseneck trailers and supplies dual hydraulic jacks. BaVekHak names gooseneck use and specifies a weld-on design.

Other candidates describe weld-on or side-mounted installation without confirming gooseneck fit. Buyers replacing a center-tube leg should prioritize the directly specified layout; those modifying a frame should verify dimensions and installation requirements before choosing a weld-on model.

A general trailer compatibility statement alone does not confirm that a jack will fit a particular gooseneck.

Capacity and number of jacks

Choose capacity based on the trailer maker’s requirements and the jack’s intended support task, not just the largest number in a title. Most manual options here list 12,000 lb, including VEVOR, BaVekHak, Kohree, and REESE. EQ Systems lists 8,000 lb for its single hydraulic leg, while the Johnson Dexter system lists 24,000 lb using two 12,000-lb jacks.

The dual-jack kit may suit buyers whose trailer calls for paired hydraulic support; a single-leg option may suit a compatible center-tube installation with requirements within its rating. Ratings and configurations vary, so confirm whether the stated capacity matches the actual load being lifted or supported.

Travel and height adjustment

Compare usable lift and adjustment features against the trailer’s required hookup and parking heights. VEVOR lists up to 26.5 inches of lift and five pre-drilled mounting-height holes; BaVekHak combines 12.5 inches of screw travel with a 13.5-inch drop leg for 26 inches total. Axiovate also lists 26 inches of vertical travel with an adjustable drop leg, while REESE specifies 12.5 inches of travel and a 28.25-inch retraction measurement.

Buyers dealing with uneven ground may favour a listed drop-leg arrangement, while those needing a simpler manual adjustment may prefer a sidewind crank. Verify the meaning of each measurement and the full installed height before selecting.

Which Gooseneck Trailer Jack Should You Choose?

For a gooseneck trailer needing a paired, powered system, choose the Johnson Dexter Hydraulic Kit: it lists two 12,000-lb jacks, a double-acting pump, and synchronized operation. For a single jack intended to mount on a gooseneck center tube, the EQ Systems 1/24 Hydraulic Jack is the clearest fit, provided its 8,000-lb capacity suits the application. If you want a manual weld-on model explicitly listing gooseneck use, the BaVekHak 12,000-lb Weld-On Jack offers 26 inches of total travel.

The VEVOR 12,000-lb Sidewind Jack is a general-purpose alternative with up to 26.5 inches of lift, but its listing does not confirm gooseneck mounting. For any option, confirm frame fit and required capacity before installation.

Frequently Asked Questions

How do I determine the required jack capacity for my gooseneck trailer?

Choose capacity based on the load the jack must actually support, using the trailer’s loaded pin weight and the jack manufacturer’s guidance rather than the trailer’s total weight alone. For paired jacks, verify how capacity is stated for the pair and each jack, and confirm the rating suits your application.

Where should a jack mount on a gooseneck trailer frame?

Mount a jack only at a frame location approved for that jack and trailer. A center-tube jack is intended for a suitable gooseneck center tube, while weld-on designs require compatible frame placement. Check the trailer and jack instructions for fit and mounting requirements before welding or installing.

When is a hydraulic jack preferable to a manual screw jack?

A hydraulic system can be preferable when you want powered lifting or synchronized operation from paired jacks. The Johnson Dexter kit lists two 12,000-lb jacks, a double-acting pump, and a flow divider for synchronized operation. A manual jack may suit buyers who prefer a hand-cranked or screw-drive design.

Should I choose a paired hydraulic kit or a single jack?

Choose a paired kit when you need a powered system with synchronized jacks; the Johnson Dexter kit lists two 12,000-lb jacks and 24,000 lb total capacity. Consider the EQ Systems 1/24 when a single center-tube jack suits the trailer, but confirm its 8,000-lb capacity is adequate.

What should I verify before installing a weld-on jack?

Confirm the jack’s mounting design fits the trailer frame and that its capacity suits the load it will support. Check the product and trailer instructions for installation requirements before welding. The VEVOR listing does not confirm gooseneck mounting, so do not assume that it fits without verifying.

Final Words

For a gooseneck-specific paired system with substantial stated capacity, the Johnson Trailer Parts Dexter Kit is the leading choice: it lists two 12,000-lb jacks and synchronized hydraulic operation. Choose the EQ Systems 1/24 when a single center-tube jack fits and its 8,000-lb capacity is sufficient. For manual lifting, the BaVekHak explicitly lists gooseneck use.

Before deciding, verify capacity and frame fit for your trailer.

Leave a Reply

Your email address will not be published. Required fields are marked *