Best Electric Jack Motor For Gooseneck Trailer: 10 Options Compared

#1 · Best Overall

1. Charouse 1824200100 Kit

• Load Capacity: 12000 lbs
• Compatible with Vehicle Type: RV

Best for: Prewired Bulldog Jack Conversion.

Why it ranks #1: Its listing explicitly names goosenecks and horse trailers, rates the conversion kit at 12,000 pounds, and specifies Bulldog single-speed jack compatibility.

A pre-wired switch box is the practical draw of Charouse’s 12-volt conversion kit, giving owners of compatible Bulldog single-speed square manual jacks a motorized control point for raising and lowering. Its stated 12,000-pound capacity targets heavy-duty RV, gooseneck, and horse-trailer applications.

Charouse describes a direct bolt-on replacement for listed OEM numbers including 1824200100, BD1046130-00, and 500370, which helps owners identify a matching drive. The pre-wired switch box supports a simpler control setup than assembling that control wiring separately, while the 12-volt powered format replaces manual cranking with motorized lifting. Its stated 12,000-pound capacity and compatibility with Bulldog single-speed square manual jacks define the intended workload and jack type. The listing does not provide a lift rate.

Skip it if you need a specified lift rate before choosing; the labwork 1824200100 kit lists 3 inches per minute at typical working loads.

For a gooseneck, RV, or horse-trailer owner with a compatible Bulldog single-speed square manual jack, Charouse combines a pre-wired switch box and stated 12,000-pound capacity. Confirm the listed OEM match and note that lift speed is not specified.

Listed on Amazon as: 12,000 lbs Electric Trailer Jack Kit Made for Bulldog Jacks 1824200100

#2 · Best Lift Rate

2. Fexhull 12,000 lb Kit

• Load Capacity: 12000 lbs
• Compatible with Vehicle Type: RV

Best for: 12,000-Pound RV Conversion Kit.

Why it ranks #2: The kit is rated at 12,000 pounds, lists a 3-inch-per-minute lift rate at typical working loads, and supports single or tandem applications.

A 12,000-pound lifting capacity gives the Fexhull powered drive kit the muscle for heavy RV and trailer hitching and leveling tasks. Its electric, single-speed format replaces repeated hand cranking, while the listed compatibility with single and tandem jack applications broadens its potential use across trailer setups.

The kit is rated for 12,000 pounds and lifts 3 inches per minute at typical working loads, pairing a stated capacity with a defined operating rate for hitching and leveling. Fexhull says it can be installed in single or tandem jack applications, which gives owners of either setup an electric-conversion option. Alloy-steel construction and the listed weatherproof, rust-resistant description speak to outdoor trailer use. The listed replacement numbers help identify it as a potential match for an existing drive kit.

Skip it if you need wiring directions included up front; Fexhull says to contact the seller for them, while the Generic 1824200100 kit lists plug-and-play installation.

For RV owners replacing a compatible powered drive or converting a single or tandem jack, this kit pairs substantial stated capacity with a measured lift rate. Check the listed replacement numbers and account for wiring setup before choosing it.

Listed on Amazon as: Electric Powered Trailer Jack Kit 12,000 lbs 12V 1824200100 | Heavy-Duty Single Speed Tongue Jack with Control Switch | Weatherproof & Rust Resistant for RV, Camper, Travel Trailer & Utility Trailer

#3 · Manual Backup

3. Woosphy 1824200100 Kit

Best for: Manual-Backup Jack Conversion.

Why it ranks #3: This 12,000-pound powered drive kit lists a manual-crank fallback during power loss and use with both single and tandem jacks.

A manual-crank fallback sets the Woosphy drive kit apart for owners who want electric operation without giving up a way to operate the jack after power loss. It is listed for 12,000-pound and Twin Cam jacks, and its stated 3-inch-per-minute lift rate applies at typical working loads.

Woosphy identifies this as a powered drive kit for single-speed jacks, with compatibility listed for 12,000-pound and Twin Cam jacks. The stated 3-inch-per-minute rate at typical working loads gives buyers a concrete expectation for the lifting workflow, while manual cranking in a power-loss event provides an alternate operating method. Use in both single and tandem jack applications supports more than one installation arrangement. Compare the OEM number before ordering, as the listing advises checking that identifier.

Skip it if you want listed included components and weather resistance; the Fexhull kit specifies included components and describes its drive as weatherproof and rust resistant.

For a trailer owner seeking electric drive with a manual fallback, Woosphy gives useful operating detail and single-or-tandem application flexibility. Its listed compatibility and OEM number should match the existing jack before selecting this drive kit.

Listed on Amazon as: 1824200100 Electric Powered Trailer Jack Kit 12000 lbs 12V

#4 · Easy Conversion

4. Soklopi 1824200100 Kit

• Load Capacity: 12000 lbs
• Compatible with Vehicle Type: RV

Best for: Manual Jack Electric Upgrade.

Why it ranks #4: Its listing describes conversion from a manual hand-crank jack, 12,000-pound capacity, and compatibility with Bulldog single-speed and dual-cam systems.

Manual-to-electric conversion with a manual override makes the Soklopi kit relevant to owners who want push-button operation but retain a hand-operated option. It is listed for Bulldog 12,000-pound single-speed drop-leg jacks and dual-cam systems, with standard 1-inch input drive shafts specified.

Soklopi lists replacement numbers including 1824200100, 1824210100, 500370, and 1046130, helping buyers compare the kit against an existing drive. Compatibility with Bulldog 12,000-pound single-speed drop-leg jacks and dual-cam systems narrows its intended fit, while the standard 1-inch input shaft detail offers a specific interface to check. The manual override matters if electric operation is unavailable. The push-button conversion workflow is stated, but the supplied details do not give a lift rate.

Skip it if you need a stated lift rate to plan hitching time; the labwork 1824200100 kit lists a 3-inch-per-minute rate at typical working loads.

For an owner of a compatible Bulldog drop-leg jack or dual-cam system, the manual override and specified input shaft make the Soklopi kit a focused electric upgrade. Match the listed jack and shaft details, and note that no lift rate is supplied.

Listed on Amazon as: 1824200100 Electric Powered Trailer Jack Kit-12,000 lbs

#5 · Tandem Compatible

5. Misakomo 1824200100 Kit

• Load Capacity: 1.2E+4 lb
• Compatible with Vehicle Type: Trailer

Best for: Single-and-Tandem Trailer Setups.

Why it ranks #5: The 12,000-pound 12V kit lists multiple replacement numbers and states that it can be used on both single and tandem jack applications.

Compatibility with both single and tandem jack applications gives the Misakomo powered drive kit useful flexibility for trailer owners choosing an electric conversion. It lists a 12,000-pound lifting capacity and replacement numbers spanning 1824200100, BD1046130-00, 500370, 1046130, and 1046131.

The 12,000-pound capacity is presented for hitching and leveling work, while the single-or-tandem application note helps buyers assess whether the kit suits their jack arrangement. Its replacement-number list offers several identifiers to compare with the existing drive before installation. Misakomo also provides power-drive dimensions of 8 by 3 9/16 by 6 3/16 inches, which gives owners a concrete size reference when planning placement. The supplied details do not specify a lift rate or included components.

Skip it if you require a specified lift rate; the labwork 1824200100 kit lists 3 inches per minute at typical working loads.

For an RV or trailer owner assessing a single or tandem jack conversion, Misakomo offers a broad replacement-number list and stated drive dimensions for planning. Match the existing part identifiers, and factor in that no lift rate is supplied.

Listed on Amazon as: 1824200100 Electric Powered Trailer Jack Kit – 12,000 lbs, 12V, Heavy-Duty Powered Drive Kit with Single Speed Jacks and Control Switch – Weather-Resistant for RVs, Campers, and Trailers

#6

6. Labwork 1824200100 Kit

• Load Capacity: 1.2E+4 lb
• Compatible with Vehicle Type: Trailer

Best for: Manual-Backup Bulldog Jack Kit.

Why it ranks #6: It is designed for 12,000-pound single-speed Bulldog jacks, lists a 3-inch-per-minute lift rate, and supports tandem applications and manual cranking.

A manual-crank option for power loss is a useful distinction in the labwork 12,000-pound electric kit, especially for trailer owners who want a fallback operating method. It is specified for 12,000-pound single-speed Bulldog jacks and lifts 3 inches per minute at typical working loads.

The listed capacity and lift rate provide concrete operating information for owners comparing electric jack conversions, while manual cranking after power loss offers an alternate way to operate the jack. Its stated use in both single and tandem applications gives flexibility for different trailer arrangements. The kit listing also names a replacement bevel gear and dowel pin, specific parts relevant to the drive assembly. Compare the supplied replacement numbers with the existing unit, as the product is described for compatible Bulldog jacks.

Skip it if you have a dual-cam jack rather than the listed single-speed Bulldog type; the Soklopi 1824200100 kit lists dual-cam compatibility.

For an owner of a compatible 12,000-pound single-speed Bulldog jack, labwork pairs a stated lift rate with a manual fallback and tandem-use option. Its specified jack type is the key boundary, so match the existing setup before buying.

Listed on Amazon as: labwork 1824200100 Electric Powered Trailer Jack Kit 12000 lbs

#7

7. Orceed 500370 Motor

Best for: Bulldog Motor Replacement Buyers.

Why it ranks #7: This 12V single-speed replacement motor lists compatibility with Bulldog jacks 1824200100 and 1824210100, making it relevant when replacing a motor only.

A direct-installation focus distinguishes the Orceed 500370 motor: its wires connect to the original harness, and its spindle bolts and receptacle are specified to fit snugly. That makes it a targeted replacement choice for owners of compatible Bulldog electric single-speed jacks, rather than a complete jack kit.

The stated fit covers Bulldog single-speed jacks 1824200100 and 1824210100, with several replacement numbers listed to help identify an existing motor. Orceed says the wires connect to the original harness and the spindle bolts and receptacle fit snugly, supporting a replacement workflow that retains those original connections. Its 12-volt specification is relevant when matching the electrical system. The supplied details describe a drive motor, not a whole jack kit, so buyers should distinguish this part from a complete conversion package.

Skip it if you need a complete jack kit or a stated lift rate; the Fexhull 12,000-pound kit lists both capacity and a 3-inch-per-minute rate.

For a Bulldog single-speed jack owner matching the listed model and replacement numbers, the harness connection details make this motor a focused replacement option. It is a motor component, not a full jack kit with a stated capacity.

Listed on Amazon as: 500370 RV Electric Single Speed Drive Motor Compatible with Bulldog Electric Single-Speed Jacks 1824200100 1824210100. Replaces OE Number: 500370, 1046131, 1046130, BD1046130-00

#8

8. ONYUOKU 500370 Motor

Best for: 12-Volt Bulldog Motor Swap.

Why it ranks #8: The 12V motor replacement lists several Bulldog drive-kit numbers, including 1824200100 and 1824210100, but is not presented as a complete conversion kit.

A 12-volt motor replacement with listed Bulldog single-speed compatibility makes the ONYUOKU 500370 a focused option for repairing an existing powered jack. Its replacement-number list covers several familiar drive identifiers, including 1824200100 and 1824210100, helping buyers compare the old motor with this component.

ONYUOKU identifies its motor for Bulldog single-speed power jacks and lists replacement numbers 500370, BD1046130-00, 1824200100, 1824210100, 1046131, and 1046130. That range supports checking the existing part number before selecting a motor. The 12-volt specification helps establish electrical-system compatibility, and the listing says the motor is manufactured to OE specifications for direct replacement. Because the supplied product is a motor, buyers should plan around a motor swap rather than expect a complete powered jack kit.

Skip it if you need a full drive kit with a stated 12,000-pound capacity; the labwork 1824200100 kit lists that capacity and its included housing.

For a Bulldog single-speed jack owner matching one of the listed replacement numbers, ONYUOKU offers a 12-volt motor replacement with stated OE-specification intent. Choose it for a motor swap, not when a complete powered drive kit is needed.

Listed on Amazon as: 500370 RV Single Speed Drive Motor Replacement for Electric Jacks

#9

9. Generic 1824200100 Kit

• Load Capacity: 20 Ton
• Compatible with Vehicle Type: ATV

Best for: Plug-and-Play Single-Speed Replacement.

Why it ranks #9: It lists a 12,000-pound lifting capacity and single-speed RV jack use, but its vehicle-type entry says ATV and its dimensions warrant verification.

Plug-and-play installation is the Generic 1824200100 kit’s clearest convenience claim: it lists a direct bolt-on replacement with mounting points and an electrical connector. The listing describes a 12-volt trailer jack motor kit for single-speed RV, trailer, and camper applications, with a stated 12,000-pound lifting capacity.

The direct bolt-on mounting points and electrical connector are described as supporting straightforward installation, which can simplify replacing a compatible single-speed drive. The stated 12,000-pound capacity gives a headline workload for the listed RV, trailer, and camper applications. Its 1824200100 part number offers a reference when comparing an existing unit. However, the supplied specifications also list a 20-ton capacity and ATV compatibility, which do not align with the title and feature description; treat those fit and capacity details as inconsistent.

Skip it if you require consistent load and vehicle-fit specifications; the Fexhull kit lists 12,000 pounds and RV compatibility without those conflicting figures.

For a buyer replacing a compatible single-speed RV or trailer drive, the listed bolt-on points and electrical connector make the installation approach clear. The conflicting 20-ton and ATV specifications are a significant boundary to resolve before selecting it.

Listed on Amazon as: 1824200100 RV Electric Jack Motor Kit for 12V Trailer

#10

10. Enger Manor Jack Kit

• Load Capacity: 500 kg
• Compatible with Vehicle Type: ATV

Best for: Single-and-Tandem Installation Kit.

Why it ranks #10: Although its title claims 12,000 pounds, the specification lists 500 kg capacity and ATV compatibility, leaving its fit for a gooseneck unclear.

Single- and tandem-jack application support is the clearest practical feature of the ENGER MANOR electric trailer jack kit, giving owners of either arrangement a stated installation path. The listing also describes a 12,000-pound lifting capacity for RV and trailer towing and leveling tasks.

The listing presents a 12,000-pound capacity and says the kit includes necessary installation components, connecting its intended heavy-load use with a simplified setup workflow. Compatibility with single and tandem jack applications gives buyers a defined range of configurations to consider. However, the specifications also report a 500-kilogram load capacity and ATV vehicle compatibility, which conflict with the product title and feature description. Buyers should treat the capacity and vehicle-fit information as inconsistent rather than rely on one figure without resolving the discrepancy.

Skip it if you need consistent capacity and vehicle-fit specifications before ordering; the Fexhull 12,000-pound RV kit presents matching capacity and RV compatibility details.

For a buyer considering a single- or tandem-jack installation, ENGER MANOR’s feature description names RV and trailer use and a 12,000-pound capacity. The conflicting 500-kilogram and ATV specifications are a material fit boundary to resolve first.

Listed on Amazon as: Electric Trailer Jack Motor Kit 12000lbs Heavy Load