Best Electric Jack For Gooseneck Trailer: 10 Options Compared

#1 · Best Overall

1. Johnson Trailer Parts Dexter Dual Hydraulic Kit

• Load Capacity: 24,000 lb
• Material: Steel
• Compatible with Vehicle Type: Trailer

Best for: Heavy goosenecks needing dual hydraulics.

Why it ranks #1: Explicitly designed for gooseneck trailers, it combines two 12,000 lb jacks, a 24,000 lb total rating, synchronized operation, and a KTI double-acting pump.

Two 12,000-pound hydraulic jacks provide this Dexter kit with 24,000 pounds of combined stated lifting capacity, distinguishing it from single-jack solutions for gooseneck trailers. A KTI double-acting pump powers raise and lower operation, while a flow divider is specified to distribute fluid evenly between the jacks for synchronized lifting.

The dual-jack layout uses two 2-by-20-inch cylinders, giving buyers a paired hydraulic arrangement for dump, cargo, and gooseneck trailers. Its KTI power unit is rated at two gallons per minute and up to 3,200 PSI, and double-acting operation supports powered raising and lowering. The flow divider is intended to balance fluid delivery across both jacks, helping coordinate their movement. This is a hydraulic kit with hoses, covers, and pump components, so installation entails hydraulic connections rather than fitting a simple standalone tongue jack.

Skip it if you need a single-jack hydraulic setup; Johnson Trailer Parts’ Dexter PJS-12-20-K kit uses one 12,000-pound power jack.

This Dexter kit fits owners of heavier gooseneck, cargo, or dump trailers seeking synchronized dual hydraulic jacks. Its paired cylinders and hydraulic pump system are a substantial installation choice, not a simple powered tongue-jack swap.

Listed on Amazon as: Dexter 24,000 lb Hydraulic Trailer Jack Kit – Dual 12,000 lb Power Jacks – KTI Double Acting Pump – Electric Hydraulic – for Dump, Cargo & Gooseneck Trailers

#2 · Best Single Hydraulic

2. Johnson Trailer Parts Dexter Single Hydraulic Kit

• Load Capacity: 12,000 lb
• Material: Steel
• Compatible with Vehicle Type: Trailers

Best for: Single-jack hydraulic goosenecks.

Why it ranks #2: Its listing names gooseneck trailers and supplies one 12,000 lb hydraulic jack with a KTI double-acting pump for powered raising and lowering.

A single 12,000-pound hydraulic jack and a KTI double-acting pump make this Dexter kit a focused option for gooseneck owners who need one powered lifting point. The hydraulic system provides controlled power-up and power-down operation, avoiding a dual-jack arrangement when a single jack is the intended setup.

The single jack uses a 2-by-20-inch cylinder and is paired with a KTI pump rated at two gallons per minute and up to 3,200 PSI. Double-acting hydraulics power both raising and lowering, so operation is not limited to a powered lift followed by a manual return. The kit also lists a jack cover, battery cables, and hydraulic hoses among its components, which clarifies the installation materials involved. Buyers seeking synchronized lifting at two points should consider a dual-jack arrangement instead.

Skip it if you need two synchronized hydraulic lifting points; Johnson Trailer Parts’ Dexter PJD-12-20-K kit includes dual 12,000-pound jacks and a flow divider.

This Dexter kit fits trailer owners seeking one 12,000-pound hydraulic jack for powered raising and lowering. Its single-jack configuration is the important fit consideration for gooseneck setups that need paired lifting points.

Listed on Amazon as: Dexter 12,000 lb Hydraulic Trailer Jack Kit – Single Power Jack – KTI Double Acting Pump – Electric Hydraulic – for Dump, Cargo & Gooseneck Trailers

#3 · Gooseneck Conversion

3. Charouse 12,000 lbs Electric Jack Kit

• Load Capacity: 12000 lbs
• Compatible with Vehicle Type: RV

Best for: Bulldog square-jack converters.

Why it ranks #3: Specifically describes lifting goosenecks and offers a 12V conversion for Bulldog single-speed square jacks, with listed OEM part-number compatibility.

Direct bolt-on compatibility with specified Bulldog single-speed square manual jacks is the defining feature of Charouse’s 12V conversion kit. It adds motorized operation to a compatible jack, with a pre-wired switch box for raising and lowering; the listing names RVs, goosenecks, and horse trailers among its intended uses.

The kit is rated for up to 12,000 pounds and is described as a high-torque powered conversion, reducing reliance on hand cranking for compatible heavy-duty trailer setups. Its pre-wired switch box offers a ready control point for powered operation, while the direct bolt-on claim targets Bulldog single-speed square manual jacks. The listed replacement numbers include 1824200100, BD1046130-00, and 500370, which help identify the intended component. Compatibility is specific, so jack type matters more than the broad trailer-use examples.

Skip it if you have a hydraulic dual-jack system; Johnson Trailer Parts’ Dexter PJD-12-20-K kit is a listed dual hydraulic option.

This Charouse kit is for owners converting a compatible Bulldog square manual jack to 12V operation, including gooseneck users. Its specific jack compatibility is the boundary: verify the existing jack type before choosing the bolt-on approach.

Listed on Amazon as: 12,000 lbs Electric Trailer Jack Kit Made for Bulldog Jacks 1824200100

#4

4. Fexhull 12,000 lb Electric Jack Kit

• Load Capacity: 12000 lbs
• Material: Alloy Steel
• Compatible with Vehicle Type: RV

Best for: 12,000-pound conversion-kit shoppers.

Why it ranks #4: This 12,000 lb powered-drive kit fits single or tandem jack applications and is relevant to trailer conversions, though its listing does not specifically name goosenecks.

A 12,000-pound capacity and compatibility with both single and tandem jack applications make the Fexhull powered drive kit a candidate for upgrading a trailer’s existing jack setup. Its electric drive is specified to lift three inches per minute at typical working loads, reducing the need for manual cranking during hitching and leveling.

The kit’s 12,000-pound capacity targets heavier RV and trailer applications, while its stated single- and tandem-jack compatibility offers flexibility for different setups. A three-inch-per-minute lift rate at typical working loads gives buyers a concrete expectation for powered operation. Alloy-steel construction is specified, and the product is described as weatherproof and rust-resistant, relevant to outdoor trailer use. Fexhull lists several replacement part numbers, which can help identify whether this is the intended drive-kit replacement.

Skip it if you need a stated manual backup for outages; Woosphy’s 1824200100 kit explicitly supports hand cranking when power is lost.

For RV owners seeking a powered drive conversion with stated single- and tandem-jack compatibility, this Fexhull kit offers a 12,000-pound rating. Check the listed replacement numbers against your existing drive before choosing it.

Listed on Amazon as: Electric Powered Trailer Jack Kit 12,000 lbs 12V 1824200100 | Heavy-Duty Single Speed Tongue Jack with Control Switch | Weatherproof & Rust Resistant for RV, Camper, Travel Trailer & Utility Trailer

#5

5. Woosphy 12,000 lb Electric Jack Kit

Best for: Manual-backup-minded jack owners.

Why it ranks #5: The 12V kit is designed for 12,000 lb and Twin Cam jacks, lifts 3 inches per minute at typical working loads, and can be manually cranked after power loss.

A manual-crank fallback is the clearest practical distinction of Woosphy’s 12,000-pound powered drive kit: it can still be operated by hand if power is lost. The kit is specified for single-speed and Twin Cam jacks, making it relevant to owners upgrading a compatible jack rather than replacing the entire tongue assembly.

Woosphy states that the kit lifts three inches per minute at typical working loads, providing a reference for hitching and leveling pace. Its 12,000-pound application and compatibility with Twin Cam and single-speed jacks help narrow the intended setup. The ability to crank manually when power fails gives owners another operating option away from a reliable electrical supply. It also supports single or tandem jack applications, a useful distinction when selecting a powered drive for a trailer configuration.

Skip it if you need a complete tongue jack rather than a drive kit; POLESTAR’s 10201091 is listed as an electric A-frame tongue jack.

This Woosphy kit suits owners with a compatible single-speed or Twin Cam jack who want electric operation and a hand-crank fallback. Its jack-type compatibility is the key boundary to check before selecting a conversion.

Listed on Amazon as: 1824200100 Electric Powered Trailer Jack Kit 12000 lbs 12V

#6

6. Misakomo 12,000 lb Electric Jack Kit

• Load Capacity: 1.2E+4 lb
• Compatible with Vehicle Type: Trailer

Best for: Single-and-tandem drive-kit shoppers.

Why it ranks #6: Its 12,000 lb powered-drive conversion supports single and tandem jack applications and lists several replacement part numbers for compatibility checks.

Misakomo lists both single- and tandem-jack use for its 12,000-pound electric powered drive conversion kit, giving owners flexibility across those configurations. The kit is aimed at RVs, campers, and trailers, and its electric operation is presented as a way to simplify hitching and leveling compared with manual effort.

The 12,000-pound capacity makes this a heavy-duty powered-drive option, while support for single and tandem jack applications broadens its stated configuration range. Misakomo provides several replacement numbers, including 1824200100 and 500370, which can help buyers identify the intended conversion component. The drive unit’s stated dimensions are eight inches long, 3 9/16 inches wide, and 6 3/16 inches high, useful for planning space around a jack. The listing does not describe a manual backup or lift speed.

Skip it if you want a stated hand-crank fallback and lift speed; Woosphy’s 1824200100 kit lists both operating details.

Misakomo suits trailer owners comparing a 12,000-pound powered drive kit for single or tandem jack applications. Use its listed dimensions and replacement numbers to assess installation space and component identity before selecting it.

Listed on Amazon as: 1824200100 Electric Powered Trailer Jack Kit – 12,000 lbs, 12V, Heavy-Duty Powered Drive Kit with Single Speed Jacks and Control Switch – Weather-Resistant for RVs, Campers, and Trailers

#7

7. Orceed 12,000 lb Electric Jack Kit

• Load Capacity: 12000 lbs
• Material: Alloy Steel
• Compatible with Vehicle Type: RV

Best for: Alloy-steel conversion-kit buyers.

Why it ranks #7: A 12,000 lb electric powered-drive kit for RV trailers, it may suit a compatible existing jack, but the supplied details do not specify gooseneck fit.

Orceed pairs a 12,000-pound stated capacity with alloy-steel construction in an electric powered drive kit for RV trailers. That combination targets owners looking to reduce manual effort while retaining a heavy-duty jack setup; the supplied listing identifies the kit as a single-speed jack fit rather than a complete standalone tongue jack.

The 12,000-pound load rating places this kit in a heavy-duty category for the RV and trailer use named in its listing. Alloy-steel material is specified, giving buyers a clear construction detail when evaluating a conversion component for outdoor towing equipment. Its 1824200100 model number identifies the kit, while the included-components field mentions housing. The listing emphasizes reduced physical effort from powered operation, but does not provide a lift rate or describe a manual backup, so those details should not be assumed.

Skip it if you require a stated lift speed or hand-crank backup; Woosphy’s 1824200100 listing provides both details.

Choose Orceed if you want an alloy-steel powered drive kit with a stated 12,000-pound capacity for an RV or trailer jack. Its sparse operating details make it less informative for buyers comparing speed or outage options.

Listed on Amazon as: 1824200100 Electric Powered Trailer Jack Kit 12V 12,000 lbs, Single Speed Jacks, fit for RV Trailer

#8 · Extended Travel

8. FZZD 5,500 lb Electric Trailer Jack

• Load Capacity: 5500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Boat Trailer, RV, Yacht Trailer

Best for: A-frame owners needing long travel.

Why it ranks #8: It offers 5,500 lb lifting capacity and a stated 3-to-26.2-inch lifting range, but its listed vehicle types are boat, RV, and yacht trailers rather than goosenecks.

A stated 22.6-inch vertical travel range gives the FZZD electric jack a useful reach specification for A-frame trailer owners managing tongue height. Its 12V motor operates by button, and a four-level height adjustment helps tailor the jack’s position across the listed three-to-26.2-inch lifting range.

The jack is rated for 5,500 pounds of lifting and 7,500 pounds of support, allowing buyers to distinguish active lifting capacity from support capacity. Its four-level adjustment and stated three-to-26.2-inch lifting range provide height flexibility for trailer tongue positioning. A built-in auto-resetting circuit breaker is specified to cut power during an overload or short circuit, protecting the motor. The included drop leg supports adjustment, while the product is listed for boat, RV, and yacht trailers rather than specifically for heavy gooseneck setups.

Skip it if you need a 12,000-pound powered-drive conversion; Charouse’s Bulldog-compatible 1824200100 kit lists that capacity.

FZZD suits A-frame trailer owners who value height adjustment, long stated travel, and circuit-breaker protection. Its 5,500-pound lift rating is the boundary for buyers considering heavier gooseneck tongue loads.

Listed on Amazon as: 5500-7500lbs Electric Trailer Jack, 22.6" Vertical Travel, 12V DC

#9

9. POLESTAR 5,000 lb A-Frame Jack

• Load Capacity: 5000 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: RV, Trailer, Truck

Best for: A-frame trailers needing a complete jack.

Why it ranks #9: The A-frame tongue jack lists 5,000 lb dynamic and 7,500 lb static lifting power, but its A-frame format is a weaker match for a gooseneck.

POLESTAR’s 5,000-pound electric A-frame tongue jack is a complete jack rather than a powered-drive conversion kit, with a stated 7,500-pound static lifting capacity. Its included crank and waterproof cover provide useful accessories for trailer owners who want electric operation alongside a manual operating option.

The jack’s 5,000-pound load capacity and 7,500-pound static lifting figure give buyers two distinct capacity details for evaluating trailer use. Its A-frame tongue-jack format suits compatible trailer setups, while the included crank provides a manual alternative to electric operation. POLESTAR also includes a waterproof cover, a practical accessory for protecting the jack during outdoor storage or towing. The listing names RVs, boats, and off-road vehicles, but its capacity is below the 12,000-pound conversion and hydraulic kits in this roundup.

Skip it if you need a 12,000-pound drive conversion; Fexhull’s 1824200100 kit lists that capacity and supports single or tandem jacks.

POLESTAR suits buyers wanting a complete electric A-frame jack with a crank and cover for a compatible lighter trailer setup. Its 5,000-pound rating is the key boundary for heavier gooseneck applications.

Listed on Amazon as: POLESTAR Electric Trailer Jack, 5000lbs Electric Power A-Frame Tongue Jack

#10

10. VEVOR 4,000 lb Electric Tongue Jack

• Load Capacity: 4000 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: Trailer

Best for: Weather-exposed lighter trailer owners.

Why it ranks #10: This 4,000 lb tongue jack is listed for trailers, horse trailers, utility trailers, and yacht trailers, with no gooseneck-specific fit stated.

A 4,000-pound capacity paired with a waterproof sunshade cover positions the VEVOR as a complete powered tongue jack for lighter trailer applications. Its stated 9.84-to-33.85-inch height range offers a broad adjustment span, while carbon-steel construction with a protective coating is specified for outdoor conditions.

The electric jack’s 4,000-pound lifting capacity is the key load limit to consider for trailer selection. Its listed height range, from 9.84 to 33.85 inches, gives owners adjustment flexibility when positioning a compatible trailer tongue. Carbon steel with a protective coating is described as helping withstand splashes and outdoor conditions, and the included waterproof cover adds another layer of weather protection. A crank handle is also included, providing a manual operating accessory. This capacity is below the heavy-duty conversion and hydraulic kits in the roundup.

Skip it if you need a higher-capacity powered conversion; Misakomo’s 1824200100 kit lists 12,000 pounds and single- or tandem-jack use.

VEVOR suits owners of compatible lighter RV, horse, utility, or yacht trailers seeking a complete electric tongue jack with cover and crank. Its 4,000-pound rating is the central boundary for gooseneck use.

Listed on Amazon as: VEVOR Electric Trailer Jack, Power Tongue Jack Weight Capacity 4000 lbs, 9.84"-33.85" Electric Tongue Jack with Waterproof Cover for Lifting RV Trailer, Horse Trailer, Utility Trailer, Yacht Trailer