A strong choice for semi trucks matches the wheel’s hub-piloted setup, bolt-hole and sleeve dimensions, and M22x1.5 thread where specified. These options suit heavy-duty truck owners, fleet technicians, and repairers replacing wheel fasteners on compatible steel or aluminum wheels. The products differ in sleeve length, pack size, material, and how clearly they identify compatible wheel arrangements, so a shared thread size alone is not enough to confirm fit.
Our leading pick is the PSGSP flanged lug nut, which explicitly lists Class 8 aluminum or steel wheels with hub-piloted mounting and provides installation guidance. Other picks cover 19mm and 28mm sleeve designs, a 39mm rear-axle sleeve, and bulk 20-piece sets.
Check your truck and wheel specifications before ordering; these listings do not establish fit for every semi.
The PSGSP Flange Lug Nuts lead because they are explicitly listed for Class 8 aluminum or steel wheels with a hub-piloted mounting system, use M22x1.5 threads, and come in a 10-piece set. The listing also identifies compatibility with Alcoa, Accuride, or other wheel makers and says to follow the truck maker’s torque specification and re-torque after 50 to 100 miles. Confirm the exact wheel and fastener fit before installation.
Our Top Picks
Best OverallExplicitly fits Class 8 hub-piloted aluminum or steel wheels, lists M22x1.5 threads, and includes application-specific installation and re-torque guidance.
View on Amazon
Best 28mm SleeveSpecifies M22x1.5 threads, a 28mm sleeve, 33mm hex, and 26mm bolt holes for dual Alcoa or mixed aluminum-and-steel setups.
View on Amazon
Corrosion-Focused PickLists carbon steel construction, M22x1.5 threads, 28mm sleeves, and compatibility with 26mm bolt holes and steel dual wheels or aluminum super singles.
View on Amazon- Best Grade 10 Set Panidarun 19mm Sleeve Nuts
- Small Pack Option Camotokiit 6-Piece Sleeve Nuts
Compare fit, sleeve dimensions, and wheel applications
| # | Product | Material | Thread Size | Inside Thread Size | Buy |
|---|---|---|---|---|---|
| 1 | 1. PSGSP Flange Lug NutsBest Overall | Carbon Steel | M22-1.5 | M22 x 1.5 | View on Amazon |
| 2 | 2. LLYZFED 28mm Sleeve NutsBest 28mm Sleeve | Carbon Steel | M22x1.5 | M22 | View on Amazon |
| 3 | 3. BTXKQTH 28mm Sleeve NutsCorrosion-Focused Pick | Carbon Steel 1018 | M22 x 1.5 | M22 X 1.5 | View on Amazon |
| 4 | 4. Panidarun 19mm Sleeve NutsBest Grade 10 Set | Grade 10 Steel | M22 | M22X1.5 | View on Amazon |
| 5 | 5. Camotokiit 19mm Sleeve NutsSteel dual-wheel 19mm sleeves | Grade 10 Steel | M22-1.5 x 33mm | M22 | View on Amazon |
| 6 | 6. FETUSI 19mm Sleeve NutsMixed-wheel hub-piloted fleets | Alloy Steel | M22x1.5 | M22 | View on Amazon |
| 7 | 7. Camotokiit 6-Piece Sleeve NutsSmall Pack Option | Grade 10 Steel | M22-1.5 x 33mm | M22-1.5 | View on Amazon |
| 8 | 8. Camotokiit 39mm Sleeve NutsRear-axle and trailer dual assemblies | Alloy Steel | M22-1.5 | M22-1.5 | View on Amazon |
| 9 | 9. Chumia Flanged Hub NutsBulk commercial vehicle replacement | Carbon Steel | M22-1.50 | M22 | View on Amazon |
| 10 | 10. Dorman 611-0030.10 Wheel NutsSpecified M22 replacement applications | Alloy Steel | M22-1.50 | M22 | View on Amazon |
Detailed Reviews: Best Lug Nuts For Semi Trucks

#1 · Best Overall
1. PSGSP Flange Lug Nuts
- Material: Carbon Steel
- Thread Size: M22-1.5
- Inside Thread Size: M22 x 1.5
Best for: Hub-piloted Class 8 wheel service.
Why it ranks #1: Explicitly fits Class 8 hub-piloted aluminum or steel wheels, lists M22x1.5 threads, and includes application-specific installation and re-torque guidance.
Explicit Class 8 fitment for aluminum or steel hub-piloted wheels is the central strength of PSGSP’s 10-piece flange-nut set. Its M22x1.5 thread and two-piece flange washer give buyers a defined heavy-truck application, while the installation guidance spells out hand tightening and a follow-up retorque.
The carbon-steel, two-piece flange design is intended to fasten the wheel, and the listing states that the nuts meet and exceed ASTM Class 10.9 and SAE Grade 8. For installation, PSGSP advises hand tightening in a star pattern to the truck maker’s torque specification, then retorquing after the first 50 to 100 miles; it specifically says not to use impact tools. That process matters when planning a careful wheel-service workflow.
- Class 8 hub-piloted wheel fitment
- M22x1.5 thread
- Two-piece flange washer design
- Includes hand-tightening and retorque guidance
- The stated installation instructions prohibit impact tools, requiring a hand-tightening approach.
Skip it if you need a 19mm sleeve and a 20-piece set; Panidarun’s M22x1.5 Grade 10 steel pack lists that configuration.
This fits buyers servicing Class 8 aluminum or steel hub-piloted wheels who can follow the specified hand-tightening and retorque procedure. Its M22x1.5 thread and flange configuration remain application-specific checks.
Full product details
| Brand | PSGSP |
|---|---|
| Color | Black |
| Compatible Groove Diameter | 22 millimeters |
| Drive Style | External Hex |
| Inside Thread Size | M22 x 1.5 |
| Item Dimensions | 7.09 x 4.13 x 2.36 inches |
| Manufacturer | PSGSP |
| Material | Carbon Steel |
| Screw Head Style | Hexagonal |
| Size Name | Flanged Nuts-M22x1.5 |
| Thread Size | M22-1.5 |
| Thread Style | Right Hand |
Listed on Amazon as: Flange Lug Nuts for Semi Truck, Hub Piloted, M22x1.5, Black, 10pcs
View on Amazon
#2 · Best 28mm Sleeve
2. LLYZFED 28mm Sleeve Nuts
- Material: Carbon Steel
- Thread Size: M22x1.5
- Inside Thread Size: M22
Best for: Class 8 28mm sleeve setups.
Why it ranks #2: Specifies M22x1.5 threads, a 28mm sleeve, 33mm hex, and 26mm bolt holes for dual Alcoa or mixed aluminum-and-steel setups.
A washer-integrated 28mm sleeve gives this 10-pack a specific two-piece configuration for Class 8 hub-piloted wheels. LLYZFED lists dual Alcoa aluminum wheels and mixed steel-and-aluminum setups with 26mm bolt holes, so the stated application helps buyers narrow compatibility beyond thread size alone.
The M22x1.5 thread, 28mm sleeve, 33mm hex, and 26mm bolt-hole diameter give buyers several dimensions to compare against a truck’s wheel hardware. Its washer-integrated two-piece construction is described as distributing load and increasing clamping strength, with reduced wheel-seat wear as a stated benefit. The listed fit covers dual aluminum wheels or mixed steel-and-aluminum arrangements on hub-piloted systems; those conditions make the configuration more specific than a general-purpose nut.
- 10-piece pack
- 28mm sleeve
- 33mm hex and M22x1.5 thread
- Listed for dual aluminum or mixed wheel setups
- Its 28mm sleeve is not the listed 19mm length used by some hub-piloted wheel assemblies.
Skip it if you need 19mm sleeves; Camotokiit’s M22x1.5 two-piece 19mm set lists steel dual-wheel and aluminum-wheel applications.
This is for Class 8 operators whose hub-piloted dual or mixed wheels match the 28mm sleeve and 26mm bolt-hole details. Check those dimensions carefully; buyers needing a 19mm sleeve should choose a listing that specifies it.
Full product details
| Brand | LLYZFED |
|---|---|
| Color | Black |
| Compatible Groove Diameter | 26 millimeters |
| Drive Style | Rear-Wheel Drive |
| Inside Thread Size | M22 |
| Item Dimensions | 8.9 x 4.2 x 2.9 inches |
| Item Weight | 4.7 pounds |
| Manufacturer | LLYZFED |
| Material | Carbon Steel |
| Size Name | 28 MM |
| Thread Size | M22x1.5 |
| Thread Style | Right Hand |
Listed on Amazon as: 10 Pack Two-Piece 28mm Sleeve Wheel Lug Nuts Fit for Heavy Duty Semi Trucks
View on Amazon
#3 · Corrosion-Focused Pick
3. BTXKQTH 28mm Sleeve Nuts
- Material: Carbon Steel 1018
- Thread Size: M22 x 1.5
- Inside Thread Size: M22 X 1.5
Best for: Corrosion-conscious semi-trailer service.
Why it ranks #3: Lists carbon steel construction, M22x1.5 threads, 28mm sleeves, and compatibility with 26mm bolt holes and steel dual wheels or aluminum super singles.
A black-oxide blueing process is the defining feature of this 10-piece carbon-steel set, with the listing claiming 300% higher salt corrosion resistance. Its 28mm sleeve and M22x1.5 thread target heavy-duty semi-trailer wheel hardware, including steel dual wheels and aluminum super singles.
The 1018 carbon-steel construction and black-oxide coating are presented for wet, coastal, and cold conditions, where the claimed salt-corrosion resistance is relevant to maintenance planning. A 28mm sleeve and M22x1.5 thread provide key dimensions, while the listing states compatibility with 26mm bolt holes and both steel dual wheels and aluminum super singles. Those details make this a specific option for matching wheel configurations rather than a generic replacement nut.
- Black-oxide blueing process
- Claimed 300% higher salt corrosion resistance
- 28mm sleeve with M22x1.5 thread
- Listed for steel dual wheels and aluminum super singles
- The specified 28mm sleeve will not suit assemblies requiring a different sleeve length.
Skip it if you need a 19mm sleeve for steel dual wheels; Panidarun’s 20-piece Grade 10 steel set specifies that sleeve length.
Consider this set for semi-trailer operators seeking the listed corrosion-focused finish and whose wheel setup matches the 28mm sleeve and 26mm bolt-hole details. Its defined sleeve length is the key fit boundary.
Full product details
| Brand | BTXKQTH |
|---|---|
| Inside Thread Size | M22 X 1.5 |
| Item Dimensions | 1.3 x 1.3 x 2.1 inches |
| Manufacturer | BTXKQTH |
| Material | Carbon Steel 1018 |
| Size Name | 28 MM |
| Thread Size | M22 x 1.5 |
| Thread Style | Right Hand |
Listed on Amazon as: 10 Pcs 28mm Sleeve Flanged M22x1.5 Wheel Nuts 33mm Hex Carbon Steel Set
View on Amazon
#4 · Best Grade 10 Set
4. Panidarun 19mm Sleeve Nuts
- Material: Grade 10 Steel
- Thread Size: M22
- Inside Thread Size: M22X1.5
Best for: Grade 10 steel 19mm sleeves.
Why it ranks #4: Provides 20 Grade 10 steel nuts with M22x1.5 threads and a 19mm sleeve for specified steer, drive, and trailer wheel arrangements.
Grade 10 steel paired with a 19mm sleeve gives Panidarun’s 20-piece set a specific combination for heavy-duty hub-piloted truck wheels. The listing covers steer-axle aluminum wheels, aluminum single wheels, and steel duals on drive or trailer axles, letting buyers assess it against several stated wheel duties.
The two-piece flanged design, M22x1.5 thread, 33mm hex, and 19mm sleeve establish key dimensions for matching wheel hardware. Panidarun lists Grade 10 steel and claims the nuts reduce wheel and hub vibration, tire wear, and rolling-resistance drag. Its stated applications span steer-axle aluminum wheels and drive or trailer axle aluminum singles or steel duals, making the set useful across those named configurations when the fit dimensions align.
- Grade 10 steel
- 20-piece pack
- 19mm sleeve and 33mm hex
- Listed for aluminum singles and steel dual wheels
- The 19mm sleeve does not match wheel assemblies that require a longer sleeve.
Skip it if you need 39mm sleeves for a rear dual assembly; Camotokiit’s six-pack M22-1.5 set specifies that length and axle use.
This suits heavy-duty truck buyers needing a 20-piece Grade 10 steel set for the listed aluminum or steel wheel arrangements. Its 19mm sleeve and M22x1.5 thread are the essential fit boundaries.
Full product details
| Brand | Panidarun |
|---|---|
| Color | Black |
| Inside Thread Size | M22X1.5 |
| Item Dimensions | 1.5 x 1.3 x 0.75 inches |
| Item Weight | 6 pounds |
| Manufacturer | Panidarun |
| Material | Grade 10 Steel |
| Size Name | M22x1.5 |
| Thread Size | M22 |
| Thread Style | Metric |
Listed on Amazon as: 20PCS Two-Piece 19mm Sleeve Flanged Wheel Lug Nuts, M22x1.5 Hex 33mm, Grade 10 Steel for Heavy Duty Semi Truck, Fit Steel Dual Wheels with Hub Piloted Seat & 26mm Bolt Hole
View on Amazon
#5
5. Camotokiit 19mm Sleeve Nuts
- Material: Grade 10 Steel
- Thread Size: M22-1.5 x 33mm
- Inside Thread Size: M22
Best for: Steel dual-wheel 19mm sleeves.
Why it ranks #5: Offers 20 Grade 10 steel, two-piece nuts with M22x1.5 threads and a 19mm sleeve for hub-piloted steel dual-wheel applications.
Its 19mm sleeve and stated compatibility with steel outer and steel inner dual wheels make this 20-piece set a targeted option for heavy-duty truck wheel hardware. The listing also identifies a hub-piloted seat and 26mm bolt-hole size, giving buyers specific setup dimensions to compare before choosing it.
The M22x1.5 thread, 33mm hex, and 19mm sleeve describe distinct points for checking compatibility with the intended wheel assembly. Camotokiit lists Grade 10 steel and a two-piece head, alongside applications covering steer-axle aluminum wheels, aluminum single wheels, and steel dual wheels on drive or trailer axles. That spread can suit mixed fleet duties, but the stated hub-piloted seat and 26mm bolt-hole detail still need to match the truck’s hardware.
- 20-piece set
- Grade 10 steel
- 19mm sleeve with 33mm hex
- Listed for steel dual wheels and aluminum wheel applications
- The 19mm sleeve length makes this a poor match for setups requiring a different sleeve length.
Skip it if you require a 28mm sleeve; LLYZFED’s 10-pack explicitly lists that length for hub-piloted dual-wheel setups.
Choose this for a hub-piloted heavy-duty truck application matching its M22x1.5 thread, 19mm sleeve, and 26mm bolt-hole specification. Buyers needing a longer sleeve or another wheel arrangement should select hardware listed for that configuration.
Full product details
| Brand | Camotokiit |
|---|---|
| Color | Black |
| Compatible Groove Diameter | 33 millimeters |
| Inside Thread Size | M22 |
| Item Dimensions | 6.69 x 4.72 x 3.54 inches |
| Manufacturer | Camotokiit |
| Material | Grade 10 Steel |
| Model | M22-1.5 |
| Screw Head Style | 2 Piece |
| Size Name | M22-1.5 x 33mm |
| Thread Size | M22-1.5 x 33mm |
| Thread Style | Metric |
Listed on Amazon as: 20PCS Two-Piece 19mm Sleeve Flanged Wheel Lug Nuts, M22x1.5 Hex 33mm for Heavy Duty Truck Semi Truck Fit Steel Dual Wheels with Hub Piloted Seat & 26mm Bolt Hole Size (20)
View on Amazon
#6
6. FETUSI 19mm Sleeve Nuts
- Material: Alloy Steel
- Thread Size: M22x1.5
- Inside Thread Size: M22
Best for: Mixed-wheel hub-piloted fleets.
Why it ranks #6: Lists a 20-piece M22x1.5 set with 19mm sleeves for Class 8 hub-guided trucks using aluminum or steel wheels.
FETUSI’s 20-piece set lists a 19mm sleeve and fitment for Class 8 trucks with aluminum or steel hub-guided wheels. That combination gives fleet buyers a defined sleeve length and broad wheel-material coverage, with the listing also naming medium trucks, mining trucks, and buses among its applications.
The M22x1.5 thread and 19mm sleeve provide central dimensions for a compatibility check, while the 33mm hex is stated in the product title. Alloy-steel construction and a 20-piece count offer a substantial supply for wheel service. The listed hub-guided fitment spans Class 8 heavy-duty trucks with aluminum or steel wheels as well as medium trucks, mining trucks, and buses, but the actual wheel configuration still needs to match the specified hardware.
- 20-piece pack
- 19mm sleeve
- Alloy-steel construction
- Listed for aluminum or steel hub-guided wheels
- The stated fitment is hub-guided; it is not listed for non-hub-guided wheel systems.
Skip it if you need a 28mm sleeve for mixed steel-and-aluminum wheels; LLYZFED’s 10-pack lists that hub-piloted configuration.
Choose this for hub-guided truck, mining-truck, or bus applications matching the M22x1.5 thread and 19mm sleeve. Its fitment is tied to hub-guided wheels, so verify that system before selecting it.
Full product details
| Brand | FETUSI |
|---|---|
| Inside Thread Size | M22 |
| Manufacturer | FETUSI |
| Material | Alloy Steel |
| Size Name | M22x1.5 |
| Thread Size | M22x1.5 |
| Thread Style | Metric |
Listed on Amazon as: 20PCS Two-Piece 19mm Sleeve Wheel Lug Nuts Fit for Heavy Duty Semi Trucks, M22x1.5 Hex 33mm Fit Steel Dual Wheels with Hub Piloted Seat, 26mm Bolt Hole Size, Black
View on Amazon
#7 · Small Pack Option
7. Camotokiit 6-Piece Sleeve Nuts
- Material: Grade 10 Steel
- Thread Size: M22-1.5 x 33mm
- Inside Thread Size: M22-1.5
Best for: Small 19mm sleeve replacement set.
Why it ranks #7: Uses the listed 19mm sleeve and M22x1.5 thread for hub-piloted steel dual wheels, but supplies six nuts rather than a larger set.
A six-piece quantity makes this Camotokiit set a smaller replacement option, while its 19mm sleeve and M22-1.5 thread target heavy-duty semi-truck wheel hardware. The listing specifies a 33mm hex and names steel dual wheels, aluminum singles, and steer-axle aluminum applications.
The two-piece flanged design combines a 19mm sleeve with a 33mm hex and M22-1.5 thread, giving buyers defined dimensions for comparing with hub-piloted hardware. Camotokiit lists Grade 10 steel and applications for steer-axle aluminum wheels as well as drive or trailer axle aluminum singles and steel duals. Its six-nut count is suited to a smaller replacement need, rather than a large multi-wheel service requiring a greater quantity.
- Grade 10 steel
- 19mm sleeve and 33mm hex
- M22-1.5 thread
- Listed for aluminum and steel wheel applications
- The six-piece pack may be insufficient for a larger wheel-service job.
Skip it if you need 20 nuts for broader replacement coverage; Camotokiit’s M22x1.5 19mm sleeve 20-piece set lists the same wheel applications.
This fits buyers needing a small quantity of 19mm sleeve nuts for the listed hub-piloted aluminum or steel wheel duties. Confirm the thread and wheel configuration, and account for the six-piece limit when planning service.
Full product details
| Brand | Camotokiit |
|---|---|
| Color | Black |
| Compatible Groove Diameter | 33 millimeters |
| Inside Thread Size | M22-1.5 |
| Item Dimensions | 6.69 x 4.72 x 3.54 inches |
| Item Weight | 1166 g |
| Manufacturer | Camotokiit |
| Material | Grade 10 Steel |
| Model | M22-1.5 |
| Screw Head Style | 2 Piece |
| Size Name | M22-1.5 x 19mm; Outside Diameter – 33mm |
| Thread Size | M22-1.5 x 33mm |
| Thread Style | Metric |
Listed on Amazon as: 6PCS Two-Piece 19mm Sleeve Flanged Wheel Lug Nuts, M22x1.5 Hex 33mm for Heavy Duty Truck Semi Truck Fit Steel Dual Wheels with Hub Piloted Seat & 26mm Bolt Hole Size (6)
View on Amazon
#8
8. Camotokiit 39mm Sleeve Nuts
- Material: Alloy Steel
- Thread Size: M22-1.5
- Inside Thread Size: M22-1.5
Best for: Rear-axle and trailer dual assemblies.
Why it ranks #8: Identifies a 39mm sleeve and M22x1.5 thread for Class 8 commercial vehicles, specifically rear drive or trailer axles with dual assemblies.
A 39mm sleeve sets this six-pack apart for rear drive or trailer axles running dualed assemblies. Camotokiit names Class 8 commercial vehicles and a range of truck makers, offering buyers a longer sleeve specification to compare against the hardware used in those rear-wheel applications.
The M22-1.5 thread and 39mm sleeve define the main fit dimensions, while the listing specifically places the nuts on rear drive or trailer axles with dual assemblies. Camotokiit names Freightliner, Volvo, Kenworth, Peterbilt, International, and Mack among the heavy-duty truck applications. The six-piece quantity may be useful for a limited replacement need, but it is less extensive than a larger set if the job requires more nuts.
- 39mm sleeve length
- M22-1.5 thread
- Listed for rear drive or trailer axles with dual assemblies
- Names several Class 8 truck makes
- Six nuts may not cover a larger multi-wheel replacement job.
Skip it if you need a 20-piece 19mm sleeve set for steel duals; FETUSI’s M22x1.5 pack lists that configuration.
This suits a buyer replacing nuts on a matching Class 8 rear drive or trailer dual assembly who needs a 39mm sleeve. The six-piece quantity and application-specific dimensions are important boundaries for planning the job.
Full product details
| Brand | Camotokiit |
|---|---|
| Inside Thread Size | M22-1.5 |
| Item Dimensions | 0.61 x 0.34 x 0.87 inches |
| Item Weight | 1240 g |
| Manufacturer | Camotokiit |
| Material | Alloy Steel |
| Size Name | M22-1.5 X 39mm |
| Thread Size | M22-1.5 |
| Thread Style | Metric |
Listed on Amazon as: 6 Pack 33mm M22-1.5 x 39mm Sleeve Wheel Lug Nut M22-1.5x39mm Skirt Flange
View on Amazon
#9
9. Chumia Flanged Hub Nuts
- Material: Carbon Steel
- Thread Size: M22-1.50
- Inside Thread Size: M22
Best for: Bulk commercial vehicle replacement.
Why it ranks #9: Supplies 20 carbon-steel M22x1.5 flanged nuts for commercial vehicles, trucks, buses, and trailers, though detailed wheel-seat dimensions are limited.
Twenty flanged nuts with M22x1.5 threads make Chumia’s set a bulk replacement option for commercial vehicles, trucks, buses, and trailers. Its 32mm hex and 32mm overall height are specifically stated, giving buyers measurements to compare when replacing wheel hardware across a fleet or larger service job.
The carbon-steel construction and black finish are paired with a 20-piece quantity, which can support a larger replacement task than a small pack. Chumia specifies M22x1.5 threads, a 32mm hex, 32mm overall height, and an approximately 45mm bottom flange diameter. The listing identifies commercial vehicles, trucks, buses, and trailers with hub-equipped applications, so those dimensions and the flange form should be checked against the intended wheel setup before installation.
- 20-piece pack
- Carbon-steel construction
- M22x1.5 thread
- 32mm hex and 32mm overall height
- The listing does not specify a sleeve length for buyers matching a sleeve-based wheel assembly.
Skip it if you need a stated 19mm sleeve for hub-piloted steel duals; FETUSI’s 20-piece M22x1.5 set specifies that sleeve.
This is a practical bulk option for commercial vehicle, truck, bus, or trailer service when the M22x1.5 thread and listed flange dimensions match. Buyers requiring a specified sleeve length should choose accordingly.
Full product details
| Brand | Chumia |
|---|---|
| Color | black |
| Inside Thread Size | M22 |
| Manufacturer | Chumia |
| Material | Carbon Steel |
| Model | YR-Chumia-4658 |
| Screw Head Style | Hexagonal |
| Size Name | M22 x 1.5 |
| Thread Size | M22-1.50 |
| Thread Style | Metric |
Listed on Amazon as: 20 Pack Wheel Nut M22 x 1.5 Flanged Hub Lug Nuts 32mm Hex 32mm Height Carbon Steel Black Metric Fasteners for Semi Trucks Trailers
View on Amazon
#10
10. Dorman 611-0030.10 Wheel Nuts
- Material: Alloy Steel
- Thread Size: M22-1.50
- Inside Thread Size: M22
Best for: Specified M22 replacement applications.
Why it ranks #10: Lists M22-1.50 alloy-steel nuts in a 10-piece pack, but describes specified-vehicle replacement fit rather than semi-truck wheel compatibility.
A 10-nut pack with M22-1.50 threads and a 33mm external hex gives buyers a defined replacement size for specified vehicle applications. Dorman identifies these as direct-replacement hardware matched to original-equipment fit and function, making the key benefit a straightforward option when those dimensions and the vehicle application align.
The alloy-steel construction and dimensions of 30.48mm length, M22-1.50 thread, and 33mm hex provide concrete checks when matching replacement hardware to an existing application. The external hex drive gives a conventional wrenching interface, while the 10 included nuts offer a set for a replacement job. Dorman describes the nuts as engineered to match original-equipment fit, function, and performance on specified vehicles; this is not a universal substitute for confirming the required wheel-nut dimensions.
- M22-1.50 thread size
- 33mm external hex drive
- Alloy-steel construction
- Includes 10 nuts
- The listing specifies fit for specified vehicles rather than a particular semi-truck axle or wheel setup.
Skip it if you need a listed hub-piloted semi-truck sleeve configuration; PSGSP’s M22x1.5 flange nuts explicitly target Class 8 aluminum or steel wheels.
This suits a buyer replacing specified-vehicle hardware who can match the M22-1.50 thread, 33mm hex, and 30.48mm length. For semi-truck wheel service, the listing does not establish a particular hub-piloted setup.
Full product details
| Brand | Dorman |
|---|---|
| Color | Black |
| Compatible Groove Diameter | 22 millimeters |
| Drive Style | External Hex |
| Included Components | 10 Nuts |
| Inside Thread Size | M22 |
| Item Dimensions | 6.25 x 4.75 x 3.75 inches |
| Item Weight | 1.8 kg |
| Manufacturer | Dorman Products |
| Material | Alloy Steel |
| Model | 611-0030.10 |
| Screw Head Style | Hexagonal |
| Size Name | M22-1.50, 30.48 mm |
| Thread Size | M22-1.50 |
| Thread Style | External, Fine, Clockwise (Right) |
| Warranty Description | Limited Lifetime |
Listed on Amazon as: Dorman 611-0030.10 M22-1.50 Wheel Nut Metric- 33mm Hex, 30.48 mm Length, 10 Pack Universal Fit
View on AmazonWhy sleeve length and wheel setup must match
A matching M22x1.5 thread does not by itself establish that a lug nut fits a truck wheel. These listings show materially different sleeve choices: 19mm sets are described for hub-piloted steel dual wheels, while the LLYZFED and BTXKQTH options use 28mm sleeves and specify 26mm bolt holes. The Camotokiit 39mm sleeve product is instead described for rear drive or trailer axles running dual assemblies.
A mismatch in sleeve or seat geometry can prevent the fastener from seating as intended, even if the thread starts. Confirm the wheel maker’s required fastener, sleeve length, bolt-hole size, and mounting arrangement against the truck’s service information.
Also note that some sellers describe compatibility broadly, while others specify wheel arrangements more narrowly. Treat listing language as a screening aid, not a substitute for checking the exact wheel and vehicle application.
Installation details that matter after selection
Correct installation and follow-up matter because the PSGSP listing specifically directs installers to use the truck maker’s torque specification and re-torque after the first 50 to 100 miles. It also says to tighten by hand in a star pattern and not to use impact tools. That guidance is product-specific; follow the vehicle or wheel manufacturer’s procedure if it differs.
Wheel fasteners that are not seated or tightened according to the applicable procedure can loosen or damage wheel components, so do not assume a nut’s material grade or two-piece construction replaces proper installation. The product data does not provide one universal torque value, and torque should not be guessed from thread size alone.
Before service, verify whether the chosen nut is intended for the wheel’s mounting style and inspect the mating surfaces and fasteners according to the relevant maintenance instructions.
How to Choose Semi-Truck Lug Nuts
Wheel mounting and sleeve dimensions
Look first for the same mounting system, sleeve length, and bolt-hole dimensions specified for your wheel. The PSGSP listing names Class 8 hub-piloted aluminum or steel wheels; the LLYZFED 28mm option specifies 26mm bolt holes, while several 19mm products identify hub-piloted steel dual wheels. A 39mm sleeve option is described for rear drive or trailer axles with dual assemblies.
Buyers replacing nuts on a verified 26mm-hole setup should compare the 28mm and 19mm sleeve listings against the wheel maker’s required dimensions rather than assuming either is interchangeable. The 39mm product suits only the more specifically described axle arrangement when its application is confirmed.
If the listing does not provide a needed dimension, verify it before ordering.
Thread and material specifications
Choose a thread that exactly matches the wheel studs, then compare the listed material and grade. Most of these semi-truck-specific products identify M22x1.5 threads; Dorman lists M22-1.50 but does not establish semi-truck fit. Material descriptions range from carbon or alloy steel to Grade 10 steel, with the PSGSP product stating it meets or exceeds ASTM Class 10.9 and SAE Grade 8.
Buyers needing a clearly stated grade can consider the Grade 10 19mm options, while those prioritizing an explicitly described hub-piloted application can start with PSGSP. Do not infer interchangeability from thread size or material alone: seat shape, sleeve geometry, and the wheel’s requirements also determine whether a fastener is suitable.
Pack size and replacement quantity
Match the pack to the number of fasteners you need, while allowing the application to determine the correct type. The listings range from six-piece Camotokiit sets to 10-piece options and 20-piece sets from Camotokiit, FETUSI, Panidarun, and Chumia. A six-piece pack may suit a limited replacement when that quantity matches the service need; 20-piece sets are more appropriate for buyers planning a larger replacement or keeping a matched group on hand.
Pack count does not establish that the nuts fit every wheel position, and the listings vary in sleeve dimensions and intended axle use. Confirm the required quantity for your service and keep the selected fastener specification consistent with the wheel maker’s requirements.
Which Semi-Truck Lug Nuts Should I Choose?
Choose the PSGSP Flange Lug Nuts if you need a clearly described Class 8 hub-piloted option for aluminum or steel wheels and its M22x1.5 specification matches your setup. For a confirmed 26mm bolt-hole application requiring a 28mm sleeve, compare the LLYZFED 28mm Sleeve Nuts and BTXKQTH 28mm Sleeve Nuts; the latter lists carbon steel and a corrosion-focused coating claim. If your wheel arrangement calls for a 19mm sleeve, the 20-piece Panidarun or Camotokiit sets provide Grade 10 steel, while FETUSI specifies Class 8 hub-guided use.
Choose the Camotokiit 39mm Sleeve Nuts only when the rear drive or trailer dual-assembly application matches. Dorman’s replacement nuts are the least truck-specific listing, so verify fit particularly carefully.
Confirm dimensions and installation requirements before buying.
Related Buying Guides
- Best Black Lug Nuts
- Best Chrome Lug Nuts
- Best Steel Lug Nuts
- Best Impact For Lug Nuts
- Best Locking Lug Nuts
- Best Extended Lug Nuts
Frequently Asked Questions
How do I confirm whether my semi-truck wheels use a hub-piloted mounting system?
Confirm the mounting system using your truck and wheel documentation or by checking with the wheel or truck manufacturer. Do not rely on a product title alone: listings here identify certain nuts for hub-piloted or hub-guided applications, but that does not establish fit for your particular wheel. Match the wheel and fastener requirements before ordering.
What torque specification and re-torque procedure should I follow for replacement lug nuts?
Follow the truck maker’s torque specification and installation procedure; do not assume one torque value applies to every listed nut or truck. The PSGSP listing specifically says to re-torque after 50 to 100 miles. Confirm the correct interval and procedure for your vehicle and replacement fasteners before driving.
How can I identify the required sleeve length and bolt-hole size for my wheel?
Check the wheel documentation or confirm dimensions with its manufacturer, then match both sleeve length and bolt-hole size to the application. Listings here include 19mm and 28mm sleeve options, and several specify a 26mm bolt hole. Those dimensions are not interchangeable by assumption; verify your wheel’s actual requirements.
Should I consider material or coating when choosing replacement lug nuts?
Consider material and coating claims as product details, not proof of fit or service life. One 28mm sleeve listing identifies carbon steel and makes a corrosion-focused coating claim, while other titles identify materials such as Grade 10 steel. First confirm the correct dimensions and wheel application, then compare listed construction details.
When should I consider a 39mm sleeve lug nut?
Consider the 39mm sleeve option only when your wheel arrangement calls for that sleeve length and its stated application matches. The listed 39mm nuts are identified for a rear drive or trailer dual-assembly application in the editorial guidance. Confirm the required dimensions and installation requirements before choosing them.
Final Words
For a clearly described Class 8 hub-piloted setup, the PSGSP option is the lead choice if its M22x1.5 specification matches your wheels. For other configurations, match the required sleeve and bolt-hole dimensions first: compare 28mm sleeves for confirmed 26mm bolt holes, or consider the 19mm options where specified. Reserve the 39mm sleeve for matching dual-assembly use, and verify Dorman fit especially carefully.
Follow the truck maker’s installation requirements.


