A strong tractor PTO drive shaft matches your tractor and implement connections, working length, and power needs; that makes these options relevant to owners replacing a shaft or fitting a brush hog, mower, or rotary cutter. The lineup spans short 19.7–23.6-inch shafts, adjustable models reaching 63 inches, round or splined implement ends, and versions with slip clutches. VEVOR’s Series 4 shaft leads for its 6-spline tractor end, round implement end, CE certification, and steel construction.
Before choosing, measure the shaft at its working positions and verify both connection types: several products share a 1-3/8-inch size but differ in end configuration. The listed power and torque figures also vary, so use them to narrow the field rather than assuming every shaft fits every tractor or implement.
The VEVOR PTO Shaft is the best overall choice here for buyers whose tractor has a 1-3/8-inch, 6-spline PTO and whose implement takes a round end. Its Series 4 construction includes a 20CrMnTi steel universal joint, a Q345 steel tube, and CE certification. Those listed details make it a strong all-around candidate, but the data does not specify a working-length range or power rating.
Confirm the required shaft length and implement connection before ordering.
Our Top Picks
Best OverallIts Series 4 build pairs a 1-3/8-inch, 6-spline tractor end with a round implement end, plus CE certification and steel components.
View on Amazon
Longest RangeThe Series 4 shaft spans 43–61 inches and combines a 6-spline tractor end with a round implement end for matching equipment.
View on Amazon
Replacement PickIts Series 4 construction uses a 20CrMnTi universal joint and Q345 tube, with a 6-spline tractor end and round implement end.
View on Amazon- Power-Rated Pick KYBOLT PTO Drive Shaft
- Slip-Clutch Option SCITOO Black PTO Shaft
Compare PTO Shaft Fit, Length, and Protection
| # | Product | Dimensions | Weight | Buy |
|---|---|---|---|---|
| 1 | 1. VEVOR PTO ShaftBest Overall | 40 x 6.3 x 5.9 in | 21 lb | View on Amazon |
| 2 | 2. Garvee PTO ShaftLongest Range | 44 x 6 x 6 in | 26 lb | View on Amazon |
| 3 | 3. XXParts PTO ShaftReplacement Pick | — | — | View on Amazon |
| 4 | 4. KYBOLT PTO Drive ShaftPower-Rated Pick | 39 x 6 x 6 in | 22.2 lb | View on Amazon |
| 5 | 5. SCITOO Black PTO ShaftSlip-Clutch Option | — | 43.4 lb | View on Amazon |
| 6 | 6. PIT66 Series 4 PTO ShaftCompact slip-clutch driveline users | — | 34 lb | View on Amazon |
| 7 | 7. ECCPP Long PTO ShaftHigher-rated long-reach implements | 40.16 x 6.3 x 5.91 in | 25.7 lb | View on Amazon |
| 8 | 8. SCITOO Yellow PTO ShaftAdjustable-length dual-spline setups | 29.55 x 5.71 x 5.52 in | 13.17 lb | View on Amazon |
| 9 | 9. ECCPP Short PTO ShaftCompact dual-spline mower connections | 20.08 x 5.12 x 4.92 in | 11.22 lb | View on Amazon |
| 10 | 10. YIHETOP Short PTO ShaftCompact standard six-spline hookups | — | 11.48 lb | View on Amazon |
Detailed Reviews: Best Pto Drive Shaft For Tractor

#1 · Best Overall
1. VEVOR PTO Shaft
- Dimensions: 40 x 6.3 x 5.9 in
- Weight: 21 lb
Best for: Series 4 mixed-end implement users.
Why it ranks #1: Its Series 4 build pairs a 1-3/8-inch, 6-spline tractor end with a round implement end, plus CE certification and steel components.
A 6-spline tractor end paired with a round implement end is the VEVOR shaft’s clearest fit distinction, enabling connection between those two end styles at the standard 1-3/8-inch size. Its Series 4 construction and CE certification make it a candidate for agricultural machinery when those interfaces and dimensions match.
The 20CrMnTi carburized-steel universal joint and Q345 steel tube inside the shield provide the listed construction for work with agricultural machinery. The 6-spline tractor connection and round implement end make the shaft specific to equipment using that combination, rather than a 6-spline implement connection. At 40 inches long and 21 pounds, it is a substantial driveline to handle and store; check the required operating length against the equipment before installation.
- 1-3/8-inch standard size
- 6-spline tractor end and round implement end
- 20CrMnTi carburized-steel universal joint
- CE-certified Series 4 driveline
- The round implement end will not match implements requiring a 6-spline connection.
Skip it if you need a 6-spline implement end; ECCPP’s 19.7–23.6-inch shaft has 6-spline ends on both sides.
Choose this VEVOR for agricultural machinery requiring a 1-3/8-inch, 6-spline tractor connection and round implement end. Its 40-inch length and end styles make checking the equipment’s required reach and implement connection essential.
Full product details
| Brand | VEVOR |
|---|---|
| Item Weight | 21 pounds |
| Item model number | T4B1000405500 |
| Manufacturer | VEVOR |
| Dimensions | 40 x 6.3 x 5.9 inches |
Listed on Amazon as: VEVOR PTO Shaft 1-3/8" PTO Drive Shaft 6 Spline End Round End Driveline
View on Amazon
#2 · Longest Range
2. Garvee PTO Shaft
- Dimensions: 44 x 6 x 6 in
- Weight: 26 lb
Best for: Long-reach mixed-end cutter setups.
Why it ranks #2: The Series 4 shaft spans 43–61 inches and combines a 6-spline tractor end with a round implement end for matching equipment.
Garvee’s 43-to-61-inch range gives this Series 4 shaft a longer reach for compatible brush hogs, finish mowers, and rotary cutters. A 1-3/8-inch six-spline tractor end pairs with a round implement end, while CE certification and specified steel components add concrete construction details.
The 43–61-inch length range helps buyers compare the shaft with a longer tractor-to-implement span, but its 43-inch minimum excludes shorter installations. A 1-3/8-inch six-spline tractor connection and round implement end target equipment using that mixed interface. Garvee lists a 20CrMnTi carburized-steel universal joint and Q345 steel tube within the shield, plus CE certification, as construction details for agricultural machinery use.
- 43–61-inch length range
- 1-3/8-inch six-spline tractor end
- Round implement end
- CE-certified Series 4 construction
- The 43-inch minimum length will not suit shorter installations.
Skip it if you need a compact shaft under 43 inches; YIHETOP’s 19.7–23.6-inch model serves short installations.
Garvee suits compatible brush hog, finish mower, or rotary-cutter setups requiring 43–61 inches and a round implement end. Its minimum length and mixed-end connections are the key boundaries to check against the equipment.
Full product details
| Brand | Garvee |
|---|---|
| Item Weight | 26 pounds |
| Item model number | 1 |
| Manufacturer | Garvee |
| Dimensions | 44 x 6 x 6 inches |
Listed on Amazon as: Garvee PTO Drive Shaft 1 3/8 in PTO Shaft, 6 Spline End Round End PTO Driveline Shaft, Series 4 Tractor 43 in-61 in Brush Hog PTO Shaft for Bush Hog,Finish Mower,Rotary Cutter
View on AmazonWhy it ranks #3: Its Series 4 construction uses a 20CrMnTi universal joint and Q345 tube, with a 6-spline tractor end and round implement end.
This XXParts Series 4 shaft combines a 39-to-55-inch stated range with a 6-spline tractor end and round implement end, enabling a longer mixed-end connection. Its listing also specifies a 20CrMnTi carburized-steel universal joint and Q345 steel tube inside the shield for agricultural machinery.
The 6-spline tractor end and round implement end define the connection type, so this shaft suits equipment using that combination rather than matching six-spline interfaces. Its stated 39–55-inch length range offers a measurement window for longer setups. XXParts lists the same 20CrMnTi carburized-steel universal-joint and Q345 steel-tube construction found in its Series 4 description, but the supplied details do not give horsepower or torque ratings for power matching.
- 39–55-inch stated length range
- 6-spline tractor end
- Round implement end
- 20CrMnTi joint and Q345 steel tube
- The supplied specifications do not state horsepower or torque capacity.
Skip it if you require stated power limits and use a longer setup; SCITOO’s 39–63-inch shaft lists horsepower and torque figures.
This XXParts shaft suits a longer setup requiring a six-spline tractor connection and round implement end within the stated 39–55-inch range. Its listing lacks power ratings, so buyers needing capacity figures should seek additional specifications.
Full product details
| Brand | XXParts |
|---|---|
| Included Components | Cord |
| Manufacturer | XXParts |
| Part Number | 639395061169 |
| Material | Steel |
| Model Number | OEM parts |
| Size | L |
Listed on Amazon as: PTO Shaft PTO Driveshaft for Tractor 1-3/8"" Spline/Round Ends 39-55"" Black, Replacement for VEVOR OEM
View on Amazon
#4 · Power-Rated Pick
4. KYBOLT PTO Drive Shaft
- Dimensions: 39 x 6 x 6 in
- Weight: 22.2 lb
Best for: Long-reach mower and cutter setups.
Why it ranks #4: The 39–55-inch shaft has a 1-3/8-inch, 6-spline tractor end, round implement end, and a listed 35–53 HP rating.
Its 39-to-55-inch length range and round implement yoke give this KYBOLT shaft a specific role on longer-reach setups using a 1-3/8-inch, six-spline tractor connection. The product lists a 35–53 hp rating depending on PTO speed, supporting buyers matching the shaft to rotary cutters, brush cutters, or mowers.
The 1-3/8-inch six-spline tractor yoke connects to tractors with that PTO end, while the 1-3/8-inch round implement yoke narrows the implement-side fit. Its 39–55-inch length range serves setups requiring more reach than a short driveline. KYBOLT lists a 20CrMnTi carburized-steel universal joint and Q345 steel drive tube, with a 35–53 hp rating depending on PTO speed, useful details when matching material and power requirements.
- 39–55-inch length range
- 1-3/8-inch six-spline tractor yoke
- 1-3/8-inch round implement yoke
- 20CrMnTi joint and Q345 steel tube
- The round implement yoke does not suit implements requiring a six-spline end.
Skip it if you need six-spline ends on both sides; ECCPP’s 37–59-inch shaft lists 1-3/8-inch six-spline ends at both ends.
This KYBOLT suits owners of rotary cutters, brush cutters, or mowers needing 39–55 inches of reach and a round implement yoke. The implement-side connection and PTO-speed-dependent 35–53 hp rating are key fit boundaries.
Full product details
| Brand | KYBOLT |
|---|---|
| Item Weight | 22.2 pounds |
| Item model number | KYBOLT |
| Manufacturer | KYBOLT |
| Dimensions | 39 x 6 x 6 inches |
Listed on Amazon as: PTO Drive Shaft, 39"-55" 1-3/8" 6 Spline Round End for Finish Mower
View on Amazon
#5 · Slip-Clutch Option
5. SCITOO Black PTO Shaft
- Weight: 43.4 lb
Best for: Long-range slip-clutch applications.
Why it ranks #5: Its 39–63-inch adjustment range and adjustable slip clutch with 900 Nm rated torque suit buyers prioritizing length and clutch features.
A 39-to-63-inch adjustment range paired with an adjustable slip clutch makes this SCITOO a long-reach option for compatible tractor implements. The listing gives a 47.5-inch recommended working length and a 900 Nm rated clutch torque, while its stated horsepower limits vary with PTO speed.
The telescoping length spans 39 to 63 inches, with 47.5 inches recommended for use, giving buyers measurements to compare against their equipment’s operating reach. Its adjustable slip clutch has a 900 Nm rated torque and an adjustment range listed for 20–55 hp, so the spring setting can be selected for the application. SCITOO also lists 35 hp at 540 rpm and 55 hp at 1000 rpm; match both speed and reach before installation.
- 39–63-inch adjustable length
- 47.5-inch recommended working length
- 900 Nm rated slip-clutch torque
- Clutch adjustment listed for 20–55 hp
- At 43.4 pounds, it is heavier to handle than a compact driveline.
Skip it if you need a lighter short shaft; YIHETOP’s 19.7–23.6-inch model weighs 11.48 pounds.
Choose this SCITOO for a compatible setup needing up to 63 inches of reach and an adjustable slip clutch. Its 43.4-pound weight, recommended length, PTO-speed ratings, and clutch setting should all suit the intended installation.
Full product details
| Brand | SCITOO |
|---|---|
| Item Weight | 43.4 pounds |
| Item model number | 848615 |
| Manufacturer | SCITOO |
| Package Dimensions | 33.99 x 7.68 x 7.48 inches |
Listed on Amazon as: SCITOO Black 39"-63" PTO Shaft,1-3/8" Heavy Duty PTO Drive Shaft
View on AmazonWhy it ranks #6: This 31.5–41-inch Series 4 shaft includes a slip clutch and 6-spline, 1-3/8-inch ends on both sides.
A slip clutch comes with PIT66’s Series 4 shaft, which spans 31.5 to 41 inches and uses 1-3/8-inch six-spline ends on both sides. Its 20CrMnTi carburized-steel universal joint and Q345 steel tube offer specified material details for buyers matching a driveline to compatible agricultural machinery.
The 31.5–41-inch range gives buyers a defined reach window, while six-spline ends at both ends suit tractor and implement connections of the same 1-3/8-inch type. A slip clutch is included, distinguishing this shaft from a plain driveline; the listing does not provide clutch torque or horsepower figures. Its 20CrMnTi universal joint and Q345 steel tube inside the shield specify the construction, but the missing capacity figures limit power-based comparison.
- 31.5–41-inch length range
- 1-3/8-inch six-spline ends at both sides
- Slip clutch included
- 20CrMnTi joint and Q345 steel tube
- The supplied details do not state horsepower or slip-clutch torque ratings.
Skip it if you need stated horsepower and clutch torque limits; SCITOO’s 39–63-inch shaft lists horsepower and a 900 Nm clutch rating.
Consider PIT66 for a compatible six-spline setup measuring within 31.5–41 inches where a slip clutch is wanted. Its listing omits horsepower and clutch torque figures, so those requirements need verification from other product documentation.
Full product details
| Brand | PIT66 |
|---|---|
| Item Weight | 34 pounds |
| Item model number | PTO Shaft |
| Manufacturer | PIT |
Listed on Amazon as: PIT66 PTO Shaft Series 4 Tractor PTO Drive Shaft 6 Spline Both Ends 1-3/8", PTO Shaft w/Slip Clutch Yellow T4 31.5"-41"
View on Amazon
#7
7. ECCPP Long PTO Shaft
- Dimensions: 40.16 x 6.3 x 5.91 in
- Weight: 25.7 lb
Best for: Higher-rated long-reach implements.
Why it ranks #7: It adjusts from 37 to 59 inches and lists 35 HP at 540 rpm and 55 HP at 1000 rpm, with 6-spline ends.
ECCPP’s 37-to-59-inch adjustment range and stated 35 hp rating at 540 rpm make this shaft a long-reach choice for compatible higher-powered equipment. Both ends use 1-3/8-inch six-spline connections, and the listing gives separate horsepower and torque figures for 540- and 1000-rpm PTO operation.
The 37-inch compressed length and 59-inch extension provide a substantial reach range to compare with the tractor and implement spacing. Its six-spline, 1-3/8-inch ends on both sides require matching interfaces, while listed ratings of 35 hp at 540 rpm and 55 hp at 1000 rpm help screen for power requirements. ECCPP also specifies 460 Nm at 540 rpm and 380 Nm at 1000 rpm, giving buyers torque figures for evaluating the intended PTO speed.
- 37–59-inch adjustable length
- 1-3/8-inch six-spline ends on both sides
- 35 hp and 460 Nm listed at 540 rpm
- 55 hp and 380 Nm listed at 1000 rpm
- The 37-inch compressed length rules it out for shorter installations.
Skip it if you need a shaft shorter than 37 inches compressed; ECCPP’s 19.7–23.6-inch model serves compact spacing.
Select this ECCPP for a compatible six-spline setup needing 37–59 inches of reach and matching its PTO-speed ratings. The 37-inch compressed length makes it unsuitable where the available installation space is shorter.
Full product details
| Brand | ECCPP |
|---|---|
| Item Weight | 25.7 pounds |
| Item model number | Adjustable |
| Manufacturer | ECCPP |
| Dimensions | 40.16 x 6.3 x 5.91 inches |
Listed on Amazon as: ECCPP PTO Shaft, 37"-59" PTO Shaft Fit for Bush Hog,Finish Mower
View on Amazon
#8
8. SCITOO Yellow PTO Shaft
- Dimensions: 29.55 x 5.71 x 5.52 in
- Weight: 13.17 lb
Best for: Adjustable-length dual-spline setups.
Why it ranks #8: Its 27.5–40.55-inch range and listed 16 HP at 540 rpm suit shorter installations, but both ends are 6-spline.
The SCITOO telescopes from 27.5 to 40.55 inches and has 1-3/8-inch, six-spline ends on both sides, enabling adjustment for compatible tractor-and-implement spacing. Its stated working length is 31.5 inches, and listed horsepower and torque figures distinguish its limits at 540 and 1000 rpm.
With a 27.5-inch compressed length, 40.55-inch extension, and 31.5-inch recommended length, the shaft gives buyers a defined range for measuring their setup. The matching 1-3/8-inch six-spline ends suit equipment with that connection at both sides. SCITOO lists 16 hp and 210 Nm at 540 rpm, and 25 hp and 172 Nm at 1000 rpm, helping buyers compare the shaft with their PTO speed and implement requirements.
- 27.5–40.55-inch adjustable length
- 31.5-inch recommended working length
- 1-3/8-inch six-spline ends at both sides
- Listed ratings for 540 and 1000 rpm
- Its listed capacity is limited to 16 hp at 540 rpm and 25 hp at 1000 rpm.
Skip it if you run an implement above its listed horsepower limits; SCITOO’s 39–63-inch shaft lists 35 hp at 540 rpm.
Pick this SCITOO for a compatible six-spline setup needing a shaft in its 27.5–40.55-inch range. Measure the operating reach and compare the listed horsepower and torque with the tractor’s PTO speed before choosing it.
Full product details
| Brand | SCITOO |
|---|---|
| Item Weight | 13.17 pounds |
| Item model number | Adjustable |
| Manufacturer | SCITOO |
| Dimensions | 29.55 x 5.71 x 5.52 inches |
| Additional Information | Important information |
Listed on Amazon as: SCITOO Yellow 27.5"-40.55" PTO Shaft, 1-3/8" PTO Drive Shaft
View on Amazon
#9
9. ECCPP Short PTO Shaft
- Dimensions: 20.08 x 5.12 x 4.92 in
- Weight: 11.22 lb
Best for: Compact dual-spline mower connections.
Why it ranks #9: The 19.7-inch compressed length and 23.6-inch extension suit compact setups, with 6-spline ends and a 16 HP rating at 540 rpm.
At 19.7 inches compressed and 23.6 inches extended, the ECCPP is a compact PTO shaft for equipment with limited driveline spacing. Its 1-3/8-inch six-spline connections on both ends suit matching tractor and implement interfaces, while separate ratings are listed for 540- and 1000-rpm operation.
The telescoping steel tube, universal joint, and yokes provide the listed driveline arrangement, with a compact length range suited to setups measuring 19.7–23.6 inches. Both ends use 1-3/8-inch six-spline connections, so it is intended for compatible tractor and implement ends rather than a round implement yoke. ECCPP lists 16 hp and 210 Nm at 540 rpm, and 24 hp and 170 Nm at 1000 rpm; use those figures to check the intended load and PTO speed.
- 19.7-inch compressed length
- 23.6-inch extended length
- 1-3/8-inch six-spline ends at both sides
- Specifications for 540- and 1000-rpm PTO speeds
- Its listed capacity is limited to 16 hp at 540 rpm and 24 hp at 1000 rpm.
Skip it if you need more than 24 hp at 1000 rpm; ECCPP’s 37–59-inch shaft lists 55 hp at that speed.
This ECCPP fits a compact installation requiring 19.7–23.6 inches and matching 1-3/8-inch six-spline ends. Its listed horsepower limits make it a poor match for higher-powered applications, so compare PTO speed and load first.
Full product details
| Brand | ECCPP |
|---|---|
| Item Weight | 11.22 pounds |
| Manufacturer | ECCPP |
| Dimensions | 20.08 x 5.12 x 4.92 inches |
Listed on Amazon as: ECCPP PTO Shaft, 20"-24" PTO Shaft Fit for Bush Hog Finish Mower
View on AmazonWhy it ranks #10: Its 19.7–23.6-inch range and 6-spline ends fit short installations, but the listing provides fewer power and construction details.
YIHETOP pairs a compact 19.7-to-23.6-inch length range with 1-3/8-inch six-spline ends on both sides, enabling connection where the tractor and implement share those interfaces. The listing identifies a T1 shaft and specifies compressed and extended dimensions for buyers measuring a short installation.
The 500 mm compressed and 600 mm extended dimensions, also listed as 19.7 and 23.6 inches, define the shaft’s compact working range for checking clearance and reach. Matching 1-3/8-inch six-spline tractor and implement ends simplify interface matching when both pieces of equipment use that standard. The supplied details do not list horsepower or torque ratings, so buyers should not rely on this listing alone to verify power capacity.
- 19.7-inch compressed length
- 23.6-inch extended length
- 1-3/8-inch six-spline tractor end
- 1-3/8-inch six-spline implement end
- The supplied specifications do not state horsepower or torque capacity.
Skip it if you require listed horsepower and torque ratings before purchase; ECCPP’s 19.7–23.6-inch shaft provides both PTO-speed ratings.
YIHETOP suits compact installations requiring 1-3/8-inch six-spline connections at both ends and a 19.7–23.6-inch range. Its supplied listing lacks power ratings, so it is not the clear choice when capacity figures are essential.
Full product details
| Brand | YIHETOP |
|---|---|
| Item Weight | 11.48 pounds |
| Manufacturer | YIHETOP |
| Package Dimensions | 25 x 5.5 x 5.5 inches |
Listed on Amazon as: Pto Shaft Pto Drive Shaft 1-3/8" 6 Spline Ends Round End T1 20"-24"
View on AmazonAvoid PTO shaft length and overlap mistakes
A PTO shaft that is too short or bottoms out as the hitch moves can create a fit problem even when the end connections match. The listed compressed and extended lengths are not interchangeable with the working length you should measure on your own tractor and implement. For instance, SCITOO Black PTO Shaft ranges from 39 to 63 inches, while ECCPP Short PTO Shaft only extends to 23.6 inches; neither range alone confirms suitability for a particular hitch geometry.
Measure between the tractor and implement connection points through the implement’s operating positions, and check the shaft maker’s guidance for minimum overlap and bottoming clearance. A telescoping shaft may also require trimming, as the SCITOO listings say, but cutting is not a substitute for checking the full range of movement.
Confirm the finished length and shield fit before use.
Match end styles and protection to the implement
Matching the diameter alone does not confirm that a PTO shaft will connect correctly or provide the protection your implement requires. VEVOR PTO Shaft and Garvee PTO Shaft list a 6-spline tractor end and a round implement end, while ECCPP Long PTO Shaft and PIT66 Series 4 PTO Shaft list 6-spline ends on both sides. That difference can rule out a model even when the 1-3/8-inch size seems right.
The data also identifies slip clutches on SCITOO Black PTO Shaft and PIT66 Series 4 PTO Shaft, but does not establish whether a particular implement requires that protection or a shear-bolt arrangement. Check the implement manual and inspect the existing connection and protection hardware before choosing.
A clutch feature is useful only when it matches the implement’s requirements and the shaft’s rated capacity.
How to Choose a Tractor PTO Drive Shaft
Working length range
Choose a shaft whose measured working length fits the tractor and implement through their full range of movement. The listed options range from 19.7–23.6 inches for ECCPP Short PTO Shaft and YIHETOP Short PTO Shaft to 39–63 inches for SCITOO Black PTO Shaft; Garvee PTO Shaft covers 43–61 inches, while ECCPP Long PTO Shaft spans 37–59 inches. These are product length ranges, not a guarantee of fit on your hitch.
Measure connection-to-connection at the positions where the shaft will operate, then verify minimum overlap and clearance against the maker’s instructions. Compact installations may favour the short options; equipment with a larger separation may need one of the longer adjustable models.
Connection end configuration
Check both shaft ends, not just the nominal 1-3/8-inch size. VEVOR PTO Shaft, Garvee PTO Shaft, and KYBOLT PTO Drive Shaft specify a 6-spline tractor end and a round implement end. ECCPP Long PTO Shaft and SCITOO Yellow PTO Shaft specify 6-spline ends on both sides.
This distinction matters because a round implement connection and a splined connection are not the same fit. Buyers replacing an existing shaft should identify the tractor PTO profile and implement input before ordering; buyers fitting new equipment should confirm both connection specifications in its manual.
Choose the matching end style first, then compare length and power ratings among the compatible options.
Power rating and clutch features
Use the listed power and torque figures, where provided, to compare shafts against the tractor and implement requirements. SCITOO Yellow PTO Shaft lists 16 HP at 540 rpm and 25 HP at 1000 rpm; ECCPP Long PTO Shaft lists 35 HP at 540 rpm and 55 HP at 1000 rpm. SCITOO Black PTO Shaft adds an adjustable slip clutch rated at 900 Nm, while PIT66 Series 4 PTO Shaft also includes a slip clutch.
These differences favour lower-rated models for compatible lighter applications and higher-rated models for equipment needing greater listed capacity. Match the rating and protection type to the implement documentation; do not infer capacity for models whose supplied data gives no power rating.
Which PTO Drive Shaft Should You Choose?
For a 1-3/8-inch, 6-spline tractor connection and a round implement input, start with VEVOR PTO Shaft, the top-ranked pick with a Series 4 build and CE certification. If you need a longer adjustable round-end shaft, Garvee PTO Shaft covers 43–61 inches; XXParts PTO Shaft is another round-end option listed at 39–55 inches. For an implement that requires a slip clutch, compare SCITOO Black PTO Shaft’s 39–63-inch span and 900 Nm rated clutch with PIT66 Series 4 PTO Shaft’s 31.5–41-inch span.
For 6-spline ends at both sides, consider ECCPP Long PTO Shaft or SCITOO Yellow PTO Shaft according to the required length and listed power. Confirm connection style, working length, rating, and protection requirements before buying.
Related Buying Guides
- Best Drive Shaft For Tractor
- Best Hydraulic Driven Pto For Tractor
- Best Pto Driven Generator For Tractor
- Best 4 Wheel Drive Tractor
- Best Drive Shaft For Brush Hog
Frequently Asked Questions
How do I measure a PTO shaft’s working length between tractor and implement?
Measure the distance between the tractor PTO connection and the implement input connection with the implement positioned for attachment. Check that distance at the hitch positions where the shaft will operate, not just while parked. Compare the measurements with the shaft’s listed working-length range and confirm the connection styles at both ends.
How much telescoping overlap should a PTO shaft retain through the full hitch range?
Retain enough overlap to keep the shaft securely engaged throughout the hitch’s full movement, while leaving room for the shaft to shorten without bottoming out. Check the fit with the implement raised, lowered, and in working position. If the overlap or clearance is uncertain, consult the shaft or implement manufacturer before operating.
How can I tell whether my implement needs a slip clutch or a shear-bolt protection device?
Check the implement’s manual, existing driveline, or input connection for the specified overload protection. A slip clutch limits transmitted torque by slipping; a shear bolt is designed to break under overload. Do not choose between them based only on appearance or shaft length—verify the required type and rating for the implement.
How do I confirm the PTO connection type will fit both the tractor and implement?
Compare the tractor PTO and implement input with the shaft’s listed end descriptions, including spline count, diameter, and whether an end is round. For example, the VEVOR listing specifies a 1-3/8-inch, 6-spline tractor end and a round implement end. Confirm both connections before ordering; matching only one side is not enough.
How should I compare listed PTO shaft length ranges?
First measure the required working distance across the hitch positions where the shaft will operate. Then compare that measurement with each listing’s length range and check that the shaft can telescope without separating or bottoming out. The listed ranges differ: Garvee is 43–61 inches, while XXParts is 39–55 inches.
Final Words
For a 1-3/8-inch, 6-spline tractor PTO and a round implement input, the VEVOR is the top-ranked all-around pick, but its working-length range and power rating are not specified here. If length is the deciding factor, compare the listed ranges for Garvee or XXParts; if you need a slip clutch, compare SCITOO Black and PIT66. Verify both connections, working length, rating, and protection type before choosing.




