A strong tractor drive shaft should match your PTO connection, implement end, working length, and power demands; the right choice suits owners replacing a driveline for a specific implement. This roundup compares ten listed options, from Series 4 shafts with round implement ends to telescoping models with 6-spline connections on both sides. Length ranges vary substantially: some shafts extend from about 27.5 inches, while others reach 67 inches.
That makes measuring your setup and checking both connection types essential before ordering. Product details also differ in stated torque and horsepower, and one listing is specifically for New Holland and Ford hay rake models rather than a general tractor PTO connection.
Use the comparison to narrow the options, then confirm dimensions and compatibility with your equipment.
The Festisoul Series 4 PTO Shaft leads because its listing gives a useful 39-to-55-inch telescoping range, a 1-3/8-inch 6-spline tractor end, a round implement end, and a stated 53 HP, 460 Nm capacity. Its CE-certified Series 4 driveline is described with a 20CrMnTi steel universal joint and Q345 shielded tube. It is a strong starting point for buyers whose tractor and implement match those connections and dimensions; verify fit before ordering.
Our Top Picks
Best OverallIts 39-to-55-inch range, 1-3/8-inch 6-spline tractor end, round implement end, and stated 53 HP rating suit common PTO replacement needs.
View on Amazon
CE-Certified PickThis CE-certified Series 4 shaft has a 1-3/8-inch 6-spline tractor end and round implement end, with a stated 40-inch product length.
View on Amazon
Steel ConstructionIts Series 4 construction lists a 20CrMnTi carburized steel universal joint and Q345 steel tube, plus 6-spline and round ends.
View on Amazon- Long-Range Fit Generic T4 PTO Shaft
- Wide Length Range SCITOO Adjustable PTO Shaft
Compare PTO Shafts by Length, Ends, and Application
| # | Product | Dimensions | Weight | Buy |
|---|---|---|---|---|
| 1 | 1. Festisoul Series 4 ShaftBest Overall | 39.96 x 6.1 x 6.69 in | 24.4 lb | View on Amazon |
| 2 | 2. VEVOR Series 4 ShaftCE-Certified Pick | 40 x 6.3 x 5.9 in | 21 lb | View on Amazon |
| 3 | 3. XXParts Series 4 ShaftSteel Construction | — | — | View on Amazon |
| 4 |  4. Generic T4 PTO ShaftLong-Range Fit | — | — | View on Amazon |
| 5 |  5. SCITOO Adjustable PTO ShaftWide Length Range | 39.99 x 6.3 x 5.91 in | 24.1 lb | View on Amazon |
| 6 |  6. ECCPP 37–59-Inch ShaftMid-span six-spline replacements | 40.16 x 6.3 x 5.91 in | 25.7 lb | View on Amazon |
| 7 |  7. ECCPP Series 1 ShaftShort Series 1 replacements | 29.53 x 5.71 x 5.51 in | 13.32 lb | View on Amazon |
| 8 |  8. Agrovolcyn PTO ShaftCompact equipment connections | — | 14.12 lb | View on Amazon |
| 9 |  9. elfinrm T6 PTO ShaftLong-reach high-output setups | — | 539 lb | View on Amazon |
| 10 |  10. Reliable Aftermarket Rake ShaftFord New Holland rake owners | 12.5 x 9.5 x 5 in | 9.3 lb | View on Amazon |
Detailed Reviews: Best Drive Shaft For Tractor
#1 · Best Overall
1. Festisoul Series 4 Shaft
- Dimensions: 39.96 x 6.1 x 6.69 in
- Weight: 24.4 lb
Best for: Series 4 round-end farm work.
Why it ranks #1: Its 39-to-55-inch range, 1-3/8-inch 6-spline tractor end, round implement end, and stated 53 HP rating suit common PTO replacement needs.
A 39-to-55-inch telescoping span and a round implement end make this Festisoul Series 4 shaft a defined option for equipment using that connection. Its 6-spline, 1-3/8-inch tractor side and CE certification provide additional fit and construction details for brush hog, rotary tiller, finish mower, and wood chipper owners.
The 6-spline tractor side and round implement end establish a distinct connection combination, so buyers can check both interfaces against their equipment. Its 39-to-55-inch telescoping range helps assess spacing, while the Series 4 designation and 20CrMnTi steel universal joint with Q345 shielded tube describe its construction. The listing states compatibility with brush hogs, rotary tillers, finish mowers, and wood chippers without modification. Its 53 hp and 460 Nm rating is another point to compare with operating demands.
- 39-to-55-inch telescoping length
- 1-3/8-inch, 6-spline tractor end
- Round implement end
- Series 4 with 20CrMnTi joint and Q345 shielded tube
- The 55-inch maximum extension may not cover equipment spacing beyond that stated range.
Skip it if you need more than 55 inches of reach; the elfinrm 1-3/8" 6-Spline PTO Drive Shaft lists extension to 67 inches.
This fits buyers whose tractor has a 1-3/8-inch, 6-spline PTO and whose implement accepts a round end, with spacing within 39 to 55 inches. Check the 53 hp rating against your application.
Full product details
| Brand | Festisoul |
|---|---|
| Item Weight | 24.4 pounds |
| Manufacturer | Festisoul |
| Dimensions | 39.96 x 6.1 x 6.69 inches |
#2 · CE-Certified Pick
2. VEVOR Series 4 Shaft
- Dimensions: 40 x 6.3 x 5.9 in
- Weight: 21 lb
Best for: Round-end implement owners.
Why it ranks #2: This CE-certified Series 4 shaft has a 1-3/8-inch 6-spline tractor end and round implement end, with a stated 40-inch product length.
A 6-spline tractor connection paired with a round implement end gives this VEVOR Series 4 shaft a specific interface for matching equipment. Its 1-3/8-inch standard size and forged construction support use with agricultural machinery, while the steel joint and shielded tube provide substantial material details for buyers comparing replacement drivelines.
The 1-3/8-inch, 6-spline tractor end and round implement end define the connections this shaft supports, making end style a key fit consideration before purchase. A solid 20CrMnTi carburized-steel universal joint and Q345 steel tube inside the shield give buyers concrete construction details for agricultural work. The product is identified as a well-forged Series 4 driveline and carries CE certification. Supplied information does not specify an adjustable length, so measure the required working span before choosing it.
- 1-3/8-inch standard tractor connection
- 6-spline tractor end
- Round implement end
- 20CrMnTi joint and Q345 shielded tube
- Round implement end will not match an implement requiring a 6-spline shaft end.
Skip it if you need a stated telescoping length range; the SCITOO Yellow 39"-62.5" PTO Shaft lists compressed, recommended, and extended lengths.
This suits tractor owners whose implement uses a 1-3/8-inch, 6-spline tractor connection and round shaft end, especially when Series 4 construction matters. Check the required span separately; no adjustable length is supplied here.
Full product details
| Brand | VEVOR |
|---|---|
| Item Weight | 21 pounds |
| Item model number | T4B1000405500 |
| Manufacturer | VEVOR |
| Dimensions | 40 x 6.3 x 5.9 inches |
Listed on Amazon as: VEVOR PTO Shaft 1-3/8" PTO Drive Shaft 6 Spline End Round End Driveline
View on Amazon#3 · Steel Construction
3. XXParts Series 4 Shaft
Best for: Series 4 round-end replacements.
Why it ranks #3: Its Series 4 construction lists a 20CrMnTi carburized steel universal joint and Q345 steel tube, plus 6-spline and round ends.
A 20CrMnTi carburized-steel universal joint and Q345 steel tube inside the shield give this XXParts Series 4 shaft concrete construction details for agricultural driveline replacement. Its 1-3/8-inch, 6-spline tractor end and round implement end identify the connection style for buyers checking equipment compatibility.
The shaft's Series 4 construction combines a solid 20CrMnTi carburized-steel universal joint with a Q345 steel tube inside the shield, details relevant when comparing driveline build. Its 1-3/8-inch, 6-spline tractor connection and round implement end establish the two interface types to check against the tractor and implement. The title identifies it as a 39-to-55-inch replacement shaft for tractors. The supplied feature details do not provide a power rating, so buyers should account for that when matching operating demands.
- Series 4 driveline
- 20CrMnTi carburized-steel universal joint
- Q345 steel tube inside the shield
- 1-3/8-inch 6-spline tractor end and round implement end
- The supplied feature details do not state a power or torque rating.
Skip it if you need a published power rating; the Festisoul Heavy-Duty PTO Driveline lists 53 hp and 460 Nm at 540 rpm.
This suits tractor owners seeking a Series 4 shaft with a 1-3/8-inch, 6-spline tractor side and round implement end. The title gives a 39-to-55-inch span; factor in the missing power rating.
Full product details
| Brand | XXParts |
|---|---|
| Included Components | Cord |
| Manufacturer | XXParts |
| Part Number | 639395061169 |
| Material | Steel |
| Model Number | OEM parts |
| Size | L |
Listed on Amazon as: PTO Shaft PTO Driveshaft for Tractor 1-3/8"" Spline/Round Ends 39-55"" Black, Replacement for VEVOR OEM
View on Amazon#4 · Long-Range Fit
4. Generic T4 PTO Shaft
Best for: Round-end 39-to-55-inch setups.
Why it ranks #4: The 39-to-55-inch adjustable length and 1-3/8-inch 6-spline tractor end with a round implement end fit a defined PTO setup.
A 39-inch compressed length and 55-inch extension give this generic T4 shaft a defined telescoping span for equipment with matching spacing. Its 1-3/8-inch, 6-spline tractor end and round implement end spell out the interface combination, helping buyers focus on connection style as well as reach.
The stated 39-to-55-inch range provides two useful endpoints for checking equipment spacing, with the telescoping format offering adjustment within that span. A 1-3/8-inch, 6-spline tractor end pairs with a round implement end, so buyers can compare both sides before installation. The listing includes one PTO drive shaft and identifies it as T4. No power or torque rating is supplied in the provided details, making those operating requirements a separate consideration for the buyer.
- 39-inch compressed length
- 55-inch extended length
- 1-3/8-inch 6-spline tractor end
- Round implement end
- No power or torque rating is supplied in the provided product details.
Skip it if you need published power and torque ratings; the Festisoul Heavy-Duty PTO Driveline lists a 53 hp and 460 Nm rating.
This may suit owners with a 1-3/8-inch, 6-spline tractor connection, a round implement end, and spacing from 39 to 55 inches. Its supplied details do not state a power or torque rating.
Full product details
| Brand | Generic |
|---|---|
| Color | Black |
| Included Components | Drive Shaft |
| Manufacturer | generic |
| Part Number | 1-3/8" T4 Spline/Round Ends |
| Model Number | 1-3/8" T4 Spline/Round Ends |
Listed on Amazon as: 39-55" Shaft Driveshaft for Tractor 1-3/8" T4 Spline/Round Ends
View on Amazon#5 · Wide Length Range
5. SCITOO Adjustable PTO Shaft
- Dimensions: 39.99 x 6.3 x 5.91 in
- Weight: 24.1 lb
Best for: Long-span six-spline setups.
Why it ranks #5: Its 39-to-62.5-inch adjustment offers more reach than several listings, and it specifies 35 HP at 540 rpm and 55 HP at 1000 rpm.
A 39-inch compressed length extending to 62.5 inches gives the SCITOO shaft a broad stated working span for equipment with changing PTO separation. Both ends use 1-3/8-inch, 6-spline connections, and the listed power and torque ratings help buyers compare it with their tractor and implement demands.
The telescoping steel tube, universal joint, and yokes form the specified driveline arrangement, while the 39-inch compressed and 62.5-inch extended dimensions give a practical span to assess against equipment spacing. SCITOO recommends 47 inches for use, providing another reference during fit planning. The shaft uses 6-spline, 1-3/8-inch connections at both ends. Its listed ratings vary by speed: 35 hp and 460 Nm at 540 rpm, or 55 hp and 380 Nm at 1000 rpm.
- 39-inch compressed length
- 62.5-inch extended length
- 1-3/8-inch 6-spline ends on both sides
- Lists power and torque ratings at 540 and 1000 rpm
- Both ends are 6-spline, so it does not suit an implement requiring a round shaft end.
Skip it if you need a round implement end; the VEVOR 1-3/8" PTO Drive Shaft lists a 6-spline tractor end and round implement end.
This is a useful candidate for owners needing a long telescoping span and matching 6-spline connections on tractor and implement. Compare the recommended 47-inch working length and speed-specific ratings with your equipment.
Full product details
| Brand | SCITOO |
|---|---|
| Item Weight | 24.1 pounds |
| Item model number | Adjustable |
| Manufacturer | SCITOO |
| Dimensions | 39.99 x 6.3 x 5.91 inches |
| Additional Information | Important information |
Listed on Amazon as: SCITOO Yellow 39"-62.5" PTO Shaft, 1-3/8" PTO Drive Shaft
View on Amazon#6
6. ECCPP 37–59-Inch Shaft
- Dimensions: 40.16 x 6.3 x 5.91 in
- Weight: 25.7 lb
Best for: Mid-span six-spline replacements.
Why it ranks #6: The 37-to-59-inch range and 1-3/8-inch 6-spline ends on both sides suit buyers needing a longer double-spline connection.
The ECCPP shaft spans 37 to 59 inches, giving buyers a stated telescoping range for matching equipment spacing. Its 1-3/8-inch, 6-spline ends on both sides identify the connection style, while the listed ratings at 540 and 1000 rpm help frame power compatibility.
A 37-inch compressed length and 59-inch extension provide a measurable span for fit planning, especially when equipment separation falls between those limits. Both the tractor and implement ends are 1-3/8-inch, 6-spline, so the connection type is consistent from end to end. ECCPP lists 35 hp and 460 Nm at 540 rpm, plus 55 hp and 380 Nm at 1000 rpm. These figures let buyers compare operating speed and rated demand rather than relying on shaft length alone.
- 37-inch compressed length
- 59-inch extended length
- 1-3/8-inch 6-spline connections at both ends
- Ratings provided for 540 and 1000 rpm
- Its 59-inch maximum extension is shorter than the SCITOO shaft's listed 62.5-inch extension.
Skip it if you need more than 59 inches of extension; the SCITOO Yellow 39"-62.5" PTO Shaft lists a longer maximum span.
Consider this ECCPP for a tractor and implement with matching 1-3/8-inch 6-spline connections and spacing within its 37-to-59-inch range. Its listed speed-specific ratings are useful checks, not a substitute for verifying your operating requirements.
Full product details
| Brand | ECCPP |
|---|---|
| Item Weight | 25.7 pounds |
| Item model number | Adjustable |
| Manufacturer | ECCPP |
| Dimensions | 40.16 x 6.3 x 5.91 inches |
Listed on Amazon as: ECCPP PTO Shaft, 37"-59" PTO Shaft Fit for Bush Hog,Finish Mower
View on Amazon#7
7. ECCPP Series 1 Shaft
- Dimensions: 29.53 x 5.71 x 5.51 in
- Weight: 13.32 lb
Best for: Short Series 1 replacements.
Why it ranks #7: Its stated compressed length is 27.56 inches, and the Series 1 driveline has 1-3/8-inch 6-spline connections on both ends.
A listed 27.56-inch compressed length and 33.07-inch extended length make this ECCPP Series 1 shaft a short-span option for compatible PTO equipment. Its 1-3/8-inch, 6-spline connection is specified for both ends, giving buyers a clear interface to compare with their tractor and implement.
The Series 1 designation and heavy-duty performance description identify the product as an agricultural power-transmission driveline, while its 1-3/8-inch, 6-spline connections at both ends specify the matching interface. The listing gives 27.56 inches compressed and 33.07 inches extended overall, a compact span to assess against the installed distance. ECCPP also says the shaft meets or exceeds OE specifications in form, fit, and function. Verify required length and spline details before planning installation.
- Series 1 driveline
- 1-3/8-inch 6-spline connections at both ends
- 27.56-inch compressed length
- 33.07-inch stated extended overall length
- The stated 33.07-inch extended length limits it to shorter equipment spans.
Skip it if you need a longer working span; the Agrovolcyn 27.56"-40.55" PTO Drive Shaft lists extension to 40.55 inches.
Choose this for a Series 1 replacement application with matching 1-3/8-inch, 6-spline ends and a short required span. Its stated extension is 33.07 inches, so measure the equipment separation before deciding.
Full product details
| Brand | ECCPP |
|---|---|
| Item Weight | 13.32 pounds |
| Item model number | Adjustable |
| Manufacturer | ECCPP |
| Part Number | 176871-5379-1548263171 |
| Model | drive shaft assemblies |
| Dimensions | 29.53 x 5.71 x 5.51 inches |
Listed on Amazon as: ECCPP 27.5"-40.55"pto drive Shaft 6 Spline Both Ends PTO Driveline Shaft
View on Amazon#8
8. Agrovolcyn PTO Shaft
- Weight: 14.12 lb
Best for: Compact equipment connections.
Why it ranks #8: This steel shaft lists a 27.56-inch closed length, 31.89-inch recommended working length, and 40.55-inch maximum extension.
A 27.56-inch closed length and 40.55-inch maximum extension give this Agrovolcyn shaft a compact stated range for equipment with shorter driveline spacing. Its steel construction and listed compatibility across tractors, mowers, tillers, wood chippers, and brush cutters make it relevant to varied small and medium equipment setups.
The 31.89-inch recommended working length offers a practical reference between the 27.56-inch closed length and 40.55-inch maximum extension. Steel is listed as the shaft material, and the product description names lawn mowers, wood chippers, tillers, rotary tools, brush cutters, loosening machines, and tractors as compatible equipment categories. That breadth can help buyers comparing a shaft for multiple machines, but the supplied details do not state end spline dimensions, so those connections need checking against the equipment.
- 27.56-inch closed length
- 31.89-inch recommended working length
- 40.55-inch maximum extension
- Listed for tractors, mowers, tillers, and wood chippers
- The supplied specifications do not state the shaft's spline count or end dimensions.
Skip it if you need published spline details before selecting a replacement; the ECCPP 27.5"-40.55" shaft specifies 1-3/8-inch 6-spline connections.
This is worth considering for owners of compact tractors or listed mower, tiller, and chipper equipment needing a span within 27.56 to 40.55 inches. Confirm the end connections, since spline dimensions are not supplied.
Full product details
| Brand | Agrovolcyn |
|---|---|
| Item Weight | 14.12 pounds |
| Manufacturer | Agrovolcyn |
| Package Dimensions | 28.11 x 5.55 x 5.31 inches |
Listed on Amazon as: 27.56"-40.55" PTO Drive Shaft Compatible with Tractor
View on Amazon#9
9. elfinrm T6 PTO Shaft
- Weight: 539 lb
Best for: Long-reach high-output setups.
Why it ranks #9: Its 47-to-67-inch telescoping length and 1-3/8-inch 6-spline couplings address unusually long equipment spacing, but may exceed common replacement needs.
Extension to 67 inches gives this elfinrm shaft a notably long stated reach for tractor and implement combinations with wider spacing. Its 1-3/8-inch, 6-spline interface and T6 Cross designation identify the connection and configuration, while listed power and torque figures help buyers assess operating demands.
The 47-inch compressed and 67-inch extended lengths give a clear span for planning installation across equipment spacing. A telescoping steel tube, universal joint, and yokes make up the described assembly, and the listing says the design adapts to differing spacing and absorbs sudden impacts to protect drivetrains. Its standard 1-3/8-inch, 6-spline interface is listed for tractors, lawn mowers, rotary tillers, and wood chippers. Ratings are 55 hp and 850 torque at 540 rpm, and 83 hp and 690 torque at 1000 rpm.
- 47-inch compressed length
- 67-inch extended length
- 1-3/8-inch 6-spline interface
- Listed ratings for 540 and 1000 rpm
- Its 47-inch compressed length may be too long for equipment requiring a shorter collapsed shaft.
Skip it if you need a compressed length below 47 inches; the SCITOO Yellow 39"-62.5" PTO Shaft lists a 39-inch compressed length.
This suits buyers needing a longer telescoping shaft for listed tractor, mower, tiller, or chipper applications with matching splines. Check that its 47-inch compressed length and speed-specific ratings suit your setup.
Full product details
| Brand | elfinrm |
|---|---|
| Item Weight | 539 pounds |
| Manufacturer | elfinrm |
| Package Dimensions | 51.18 x 10.24 x 6.69 inches |
Listed on Amazon as: 1-3/8" 6-Spline PTO Drive Shaft 47"-67" T6 Cross
View on Amazon#10
10. Reliable Aftermarket Rake Shaft
- Dimensions: 12.5 x 9.5 x 5 in
- Weight: 9.3 lb
Best for: Ford New Holland rake owners.
Why it ranks #10: This telescoping shaft is specified for Ford and New Holland rake models 256, 258, 259, and 260, so it is less suitable as a general PTO shaft.
Compatibility with Ford/New Holland rake models 56, 256, 258, 259, and 260 is the defining feature of this telescoping drive shaft. The assembly connects the wheel drive to the gearbox and includes a cross and bearing assembly, making it a model-specific replacement option rather than a general PTO driveline.
The listed rake-model fit makes this a focused replacement candidate for owners of Ford/New Holland 56, 256, 258, 259, or 260 equipment. Its contents include one telescoping wheel-drive-to-gearbox shaft and one cross and bearing assembly, supporting replacement of that described connection as a kit. The cross and bearing dimensions are specified as a 1-1/16-inch cap diameter and 2-1/2-inch overall length. North American PTO ratings are 19 hp at 540 rpm and 29 hp at 1000 rpm.
- Listed for Ford/New Holland rake models 56, 256, 258, 259, and 260
- Telescoping wheel-drive-to-gearbox shaft included
- Cross and bearing assembly included
- Cross and bearing dimensions specified
- Fitment is limited to the listed Ford/New Holland rake models.
Skip it if you need a general tractor-to-implement PTO shaft; the ECCPP 37"-59" PTO Shaft lists 1-3/8-inch 6-spline ends.
This is for owners replacing the wheel-drive-to-gearbox shaft on a listed Ford/New Holland rake model. Check model and cross-bearing dimensions carefully; it is not presented as a universal tractor PTO shaft.
Full product details
| Brand | Reliable Aftermarket Parts |
|---|---|
| Item Weight | 9.3 pounds |
| Manufacturer | Reliable Aftermarket Parts |
| Dimensions | 12.5 x 9.5 x 5 inches |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer – www.P65Warnings.ca.gov |
Listed on Amazon as: 677847 Telescoping Drive Shaft Fits Ford/New Holland 56 256 259 260 258
View on AmazonAvoiding PTO Length and Connection Mismatches
Measure the shaft in its compressed and working positions, and verify both ends before choosing a replacement. These listings illustrate why one measurement is not enough: the SCITOO shaft lists 39 inches compressed and 62.5 inches extended, while the ECCPP 37–59-Inch Shaft lists a different range. End styles also differ: the Festisoul Series 4 Shaft and VEVOR Series 4 Shaft use a 6-spline tractor end with a round implement end, whereas the ECCPP 37–59-Inch Shaft lists 6-spline ends on both sides.
A shaft that reaches the needed distance can still fail to connect if the implement end or spline count is wrong. Check the PTO and implement manuals, measure the installed setup, and confirm that the shaft retains adequate overlap through the equipment’s full range of movement.
Do not assume that a product advertised for a familiar implement fits every model.
Why PTO Guards and Moving Parts Matter
A matching shaft still needs its safety components inspected and maintained; connection fit alone does not prevent injury or driveline damage. PTO shafts rotate at high speed, and exposed or damaged guards can create a serious entanglement hazard. The Festisoul Series 4 Shaft listing describes a shielded tube, while other product descriptions mention telescoping tubes, universal joints, and yokes; those details do not establish that a complete guard assembly is included or that it is ready for use.
Before operating, check the tractor and implement manuals for guarding and setup requirements, inspect the guard and retaining devices, and keep clear of rotating parts. Also check that the shaft does not bottom out or separate as the implement moves.
A listing’s material or power figures should not substitute for safe installation or for confirming the equipment maker’s requirements.
How to Choose a Tractor PTO Shaft
Working and Compressed Length
Choose a shaft whose compressed and extended lengths suit your tractor-to-implement spacing throughout movement. Listed ranges run from the Agrovolcyn PTO Shaft’s 27.56-inch closed length and 40.55-inch maximum extension to the elfinrm T6 PTO Shaft’s 47-to-67-inch range. The SCITOO Adjustable PTO Shaft spans 39 to 62.5 inches, while the Festisoul Series 4 Shaft covers 39 to 55 inches.
Measure the installed distance in the positions the implement will actually occupy and compare with the manufacturer’s required overlap. Buyers with close-coupled equipment should investigate the shorter options; wider spacing may favour longer telescoping choices, provided the connections and shaft series also match.
End Style and Spline Count
Match the tractor and implement ends exactly, rather than relying on a general fitment claim. The Festisoul Series 4 Shaft, VEVOR Series 4 Shaft, and Generic T4 PTO Shaft list a 1-3/8-inch 6-spline tractor end and round implement end. By contrast, the SCITOO Adjustable PTO Shaft and ECCPP 37–59-Inch Shaft list 1-3/8-inch 6-spline ends on both sides.
These are not interchangeable descriptions: a round implement connection differs from a splined one. Buyers replacing a round-ended driveline should focus on matching round-end models; equipment with a 6-spline implement connection may favour a double-spline option.
Check the implement and tractor specifications before ordering, including the required connection size.
Series and Stated Power
Compare the shaft series and stated power figures with the requirements of your tractor and implement. The Festisoul Series 4 Shaft lists 53 HP and 460 Nm, while the SCITOO Adjustable PTO Shaft states 35 HP and 460 Nm at 540 rpm and 55 HP and 380 Nm at 1000 rpm. The ECCPP Series 1 Shaft is identified as a Series 1 driveline, but its supplied power details are incomplete in the listing.
These figures and series labels make products easier to screen, but they do not establish compatibility by themselves. Buyers running higher-load implements should prioritize a listing with relevant, explicit ratings and confirm requirements in equipment documentation.
For lighter or compact setups, a smaller Series 1 option may be relevant only if its specifications meet the machine’s demands.
Which Tractor PTO Shaft Should You Choose?
For a common 39-to-55-inch setup with a 6-spline tractor end and round implement end, start with the Festisoul Series 4 Shaft; its stated 53 HP and 460 Nm figures add useful selection details. Choose the VEVOR Series 4 Shaft if its listed 40-inch product length and matching end styles suit your measurements. If you need a longer adjustment range and double 6-spline ends, compare the SCITOO Adjustable PTO Shaft and ECCPP 37–59-Inch Shaft against your required connection and power specifications.
For closer equipment spacing, the Agrovolcyn PTO Shaft lists a 27.56-inch closed length, while the ECCPP Series 1 Shaft lists the same compressed length and a Series 1 design. Select the Reliable Aftermarket Rake Shaft only for its specified rake applications.
Confirm all measurements and fitment before purchase.
Related Buying Guides
Frequently Asked Questions
How do I measure a PTO shaft at its shortest and working lengths?
Measure the shaft from the same end reference points at its shortest compressed position and at the working length required by your equipment. Keep the shaft aligned and follow the product’s stated measuring method, since listings may describe length differently. Compare both measurements with your tractor and implement setup before ordering.
How can I confirm PTO spline count, end type, and rotation speed compatibility?
Check the tractor and implement manuals or inspect their PTO connections to confirm spline count and end style, then compare those details with the shaft listing. Confirm the required rotation speed from the equipment documentation as well. Do not assume that matching shaft length means the connections or operating requirements are compatible.
When is a PTO shaft guard or replacement cross bearing needed?
Use a properly fitted guard to cover the rotating driveline and replace a cross bearing when inspection shows damage, excessive play, or binding. Consult the shaft or equipment instructions for inspection and replacement guidance. Never work on a driveline while it is operating, and confirm the replacement part suits the specific shaft.
How should I compare listed shaft lengths across products?
Compare the measurement convention as well as the numbers: listings may give a compressed length, an extended range, or a product length. Match the listing’s measurements to your own required closed and working lengths, using its stated reference points. If those details are unclear, verify them with the seller or product documentation.
What should I verify before using a shaft with a particular implement?
Confirm that the shaft’s connection ends, length range, and stated power or torque capacity meet the tractor and implement requirements. Check application-specific guidance too; a shaft listing for a rake, mower, or other implement should not be treated as universally suitable. Follow equipment documentation and verify fitment before purchase and operation.
Final Words
Start with the Festisoul Series 4 if your setup matches its 39-to-55-inch range, 6-spline tractor end, and round implement end; verify fit before ordering. Consider VEVOR when its listed 40-inch length and end styles suit your measurements. For longer adjustment or closer spacing, compare the specified SCITOO, ECCPP, or Agrovolcyn options with your required connections.
Choose the rake shaft only for its specified applications, and confirm fitment.
