Best Drive Shaft For Brush Hog: Compare PTO Drivelines

#1 · Best Overall

1. Hipicute PTO Shaft

• Dimensions: 39.96 x 6.1 x 6.69 in
• Weight: 24.2 lb

Best for: Series 4 round-end replacement.

Why it ranks #1: Its stated 39–55-inch range, Series 4 driveline, and 1-3/8-inch six-spline tractor and round implement ends suit the brush hog use case.

Its stated 39-to-55-inch length range gives this Hipicute Series 4 driveline a defined span for matching brush hog or finish-mower spacing. The 1-3/8-inch six-spline tractor end and round implement end specify the connection arrangement, while a carburized-steel universal joint and shielded steel tube identify its construction.

The 39-to-55-inch range gives buyers a concrete length window to compare with their tractor-to-implement spacing. Its six-spline tractor end and round implement end are both specified at the standard 1-3/8-inch connection size, making the required end style explicit for brush hogs, finish mowers, and rotary cutters. A solid 20CrMnTi carburized-steel universal joint and Q345 steel tube within the shield form the stated Series 4 construction. The listing does not state horsepower or torque limits.

Skip it if you need a published horsepower or torque rating before selection; the ECCPP listing provides both shaft and clutch figures.

Consider this Hipicute for a Series 4 replacement when the 39-to-55-inch range and round implement end match your equipment. Buyers who require stated horsepower or torque limits should treat that missing information as a selection boundary.

Listed on Amazon as: Pto Drive Shaft 1 3/8" Pto Shaft, 39"-55" Brush Hog Pto Shaft, 6 Spline End Round End Pto Driveline Shaft, Series 4 Tractor for Bush Hog,Finish Mower,Rotary Cutter

#2

2. VEVOR PTO Shaft

• Dimensions: 40 x 6.3 x 5.9 in
• Weight: 21 lb

Best for: Standard Series 4 replacement.

Why it ranks #2: This Series 4 shaft specifies the common 1-3/8-inch six-spline tractor end and round implement end, with a 40-inch listed product length.

The forged Series 4 driveline combines a 20CrMnTi carburized-steel universal joint with a Q345 steel tube inside its shield, giving brush-hog owners specified heavy-duty construction for agricultural machinery. Its 1-3/8-inch, six-spline tractor end and round implement end target equipment using that connection arrangement, rather than a different implement-end fitting.

The six-spline tractor end and round implement end make the connection configuration clear for matching equipment, while the standard 1-3/8-inch size identifies the shaft’s nominal fit. Its Series 4 construction pairs the solid carburized-steel universal joint with a Q345 steel tube inside the shield, so the components are specified for agricultural-machinery use. At 40 inches long and 21 pounds, it is a substantial replacement to handle and store; the listing does not give an adjustable length range.

Skip it if you need a stated telescoping range or a six-spline implement end; this model lists a round implement end and no length range.

Choose this VEVOR for agricultural machinery calling for a Series 4 shaft with a 1-3/8-inch six-spline tractor connection and round implement end. Its key boundary is the unspecified adjustment range, so account for required shaft length before choosing it.

Listed on Amazon as: VEVOR PTO Shaft 1-3/8" PTO Drive Shaft 6 Spline End Round End Driveline

#3 · 53 HP Rating

3. Festisoul PTO Shaft

• Dimensions: 39.96 x 6.1 x 6.69 in
• Weight: 24.4 lb

Best for: CE-certified rotary-cutter driveline.

Why it ranks #3: Its 39–55-inch telescoping range and standard six-spline-to-round ends fit the use case; listed capacity is 53 HP and 460 Nm.

The Festisoul Series 4 driveline lists a 53 hp, 460 Nm torque specification, giving buyers concrete capacity information alongside CE certification. Its 39-to-55-inch telescoping length and 1-3/8-inch six-spline tractor end with round implement end describe the fit range and connection style for brush hogs and other listed equipment.

A telescoping range of 39 to 55 inches lets buyers compare the shaft against their equipment spacing, while the 1-3/8-inch six-spline tractor end and round implement end identify its connection pattern. The listed 53 hp and 460 Nm torque figure provide a capacity reference, and the Series 4 construction names a 20CrMnTi steel universal joint with a Q345 shielded tube. The listing describes use with brush hogs, rotary tillers, finish mowers, and wood chippers; verify the specific equipment’s requirements against those figures.

Skip it if you need more than 55 inches extended; the ECCPP lists a 68-inch maximum and also specifies a slip clutch.

Choose this Festisoul for a CE-certified Series 4 driveline when its 39-to-55-inch span, end fittings, and listed 53 hp, 460 Nm figure suit the equipment. The range is its central fit boundary.

Listed on Amazon as: Heavy-Duty PTO Driveline Shaft Series 4, 39" to 55" Telescopic 1-3/8" 6 Spline Round End Tractor Implement for Brush Hog Rotary Cutter Finish Mower, CE Certified 53 HP 460 Nm Torque Agricultural Acces

#4 · Slip Clutch

4. ECCPP Slip-Clutch Shaft

• Weight: 49.8 lb

Best for: Higher-capacity slip-clutch option.

Why it ranks #4: It pairs the standard six-spline and round ends with a slip clutch rated at 900 Nm, plus a stated 42–68-inch range.

A 900 Nm-rated slip clutch and shaft ratings up to 74 hp at 1,000 rpm distinguish this ECCPP driveline for buyers checking higher stated capacity. Its 42-to-68-inch span, 1-3/8-inch six-spline tractor end, and round implement end provide the key length and connection details for equipment matching.

The 42-inch compressed and 68-inch extended lengths provide a broad stated adjustment window for comparing tractor-to-implement spacing. The shaft lists 47 hp and 620 Nm at 540 rpm, and 74 hp and 520 Nm at 1,000 rpm; its slip clutch has a 900 Nm rating and a 20-to-55 hp adjustment range. A 1-3/8-inch six-spline tractor end and round implement end identify the connections. At 49.8 pounds, handling and storage merit consideration during installation.

Skip it if you prioritize a lighter shaft; the YIHETOP weighs 14.52 pounds, though it has six-spline ends and a shorter range.

This ECCPP suits buyers needing a long adjustment range and a listed slip clutch with capacity figures. Its 49.8-pound weight is a handling consideration, and its end fittings and ratings must match the equipment.

Listed on Amazon as: ECCPP PTO Shaft with Slip Clutch, 42"-68" PTO Shaft PTO DriveShaft

#5

5. Acekool PTO Shaft

• Dimensions: 39.96 x 6.1 x 6.69 in
• Weight: 24.4 lb

Best for: CE-certified Series 4 fit.

Why it ranks #5: Its 39–55-inch product description and Series 4 construction closely match the standard brush hog shaft pattern and connection type.

A 39-to-55-inch stated range pairs with a Series 4 construction on this Acekool driveline, giving buyers a defined length window and specified joint materials. Its 1-3/8-inch six-spline tractor end and round implement end clarify the connection pattern for brush hogs, finish mowers, or rotary cutters using matching fittings.

The 39-to-55-inch length range helps establish whether the shaft can span the tractor-to-implement spacing, while the specified 1-3/8-inch six-spline tractor end and round implement end make the connection style explicit. A solid 20CrMnTi carburized-steel universal joint and Q345 steel tube within the shield are identified as the Series 4 construction, with CE certification also stated. The product description names brush hogs, finish mowers, and rotary cutters; no horsepower or torque figures are supplied for capacity checks.

Skip it if you need stated horsepower or torque limits to check capacity; the Festisoul lists 53 hp and 460 Nm.

This Acekool suits buyers looking for a CE-certified Series 4 shaft with round implement-end compatibility and a 39-to-55-inch range. Its lack of stated capacity figures is the main boundary for equipment selection.

Listed on Amazon as: 39"-55" Adjustable PTO Driveline Shaft, 1-3/8" 6-Spline Round End

#6

6. Generic Series 4 Shaft

• Dimensions: 39 x 5.92 x 6 in
• Weight: 23.7 lb

Best for: Standard-length round-end shaft.

Why it ranks #6: The listed 39–55-inch range, Series 4 design, and 1-3/8-inch six-spline tractor and round implement ends address common brush hog fit.

A 39-to-55-inch stated range gives this Generic Series 4 shaft a defined fit window for brush hog, finish-mower, and rotary-cutter setups. Its 1-3/8-inch six-spline tractor end and round implement end identify the required connection arrangement, while the listed steel joint and shield tube specify its construction.

The 39-to-55-inch span lets buyers compare the shaft with their equipment spacing before installation. At the ends, a 1-3/8-inch six-spline tractor connection pairs with a round implement connection, so both fittings can be checked against the tractor and tool. The stated Series 4 construction uses a solid 20CrMnTi carburized-steel universal joint and a Q345 steel tube inside the shield. The supplied information does not include horsepower or torque capacity figures, limiting numerical capacity comparison.

Skip it if you need numerical horsepower or torque ratings for capacity checks; the SCITOO listing gives figures at 540 and 1,000 rpm.

Consider this shaft for brush hog, finish-mower, or rotary-cutter equipment matching its 1-3/8-inch connections and 39-to-55-inch range. Buyers needing stated horsepower or torque limits will need more capacity information.

Listed on Amazon as: Tractor PTO Shaft 1 3/8" PTO Drive Shaft, 6 Spline End Round End PTO Driveline Shaft, Series 4 Tractor PTO Shaft, 39"-55" Brush Hog PTO Shaft, Black PTO Shaft for Bush Hog/Finish Mower/Rotary Cutter

#7 · Longest Extension

7. SCITOO PTO Shaft

• Dimensions: 39.79 x 5.91 x 5.91 in
• Weight: 25.2 lb

Best for: Long-range adjustable driveline.

Why it ranks #7: Its 39–63-inch adjustable range accommodates longer setups, while the listed 1-3/8-inch six-spline and round ends suit common connections.

A 39-to-63-inch telescoping range gives this SCITOO shaft room to span a wider stated length interval than a fixed-length driveline, helping buyers match equipment geometry. The 1-3/8-inch, six-spline tractor end and round implement end identify its connection style, while listed power and torque figures define operating limits to consider.

The telescoping steel tube adjusts from 39 inches compressed to 63 inches extended, and the supplied information says it can be trimmed to a required length. That range and cut-to-length option support fitting the shaft to equipment spacing, with deburring required after cutting. A universal joint and yokes connect the telescoping sections; the tractor end is 1-3/8-inch six-spline and the implement end is round. Listed capacities are 35 hp at 540 rpm and 55 hp at 1,000 rpm.

Skip it if you need an out-of-box shaft beyond 63 inches extended; its stated maximum is 63 inches, while the ECCPP reaches 68 inches.

This SCITOO suits buyers who need a broad adjustment range and can trim and deburr the telescoping sections when necessary. Its round implement end and listed power ratings remain key boundaries for matching a brush hog setup.

Listed on Amazon as: SCITOO Yellow 39"-63" PTO Shaft, 1-3/8" PTO Drive Shaft

#8

8. ACZCR PTO Shaft

• Dimensions: 47.24 x 6.1 x 5.71 in
• Weight: 26.8 lb

Best for: Long-span adjustable shaft.

Why it ranks #8: The standard six-spline tractor and round implement ends fit the target connection, and its 43–71-inch range suits longer spans.

A 43-to-71-inch adjustment span makes this ACZCR shaft the option for setups needing a longer stated reach than many shorter-range drivelines. Its 1-3/8-inch six-spline tractor end and round implement end define the connection layout, and listed horsepower and torque figures give buyers capacity points to check against their machinery.

The shaft compresses to 43 inches and extends to 71 inches, giving buyers a length window to compare with tractor and implement spacing. Its 1-3/8-inch six-spline tractor end and round implement end specify the fitting arrangement for equipment of the same size and type. ACZCR lists 35 hp and 460 Nm at 540 rpm, plus 55 hp and 380 Nm at 1,000 rpm, which makes operating speed relevant when checking the stated capacity. The supplied facts do not specify a slip clutch.

Skip it if you require an included slip clutch; the ECCPP shaft explicitly lists one with a 900 Nm rated torque.

This ACZCR is suited to buyers whose equipment spacing calls for a 43-to-71-inch range and whose connections match its ends. Its listed capacities are speed-specific, and a slip clutch is not specified in the supplied features.

Listed on Amazon as: Black PTO Shaft;ACZCR 43"-71" PTO Shaft for Bush Hog/Finish Mower

#9

9. XXParts Slip-Clutch Shaft

Best for: Slip-clutch shaft replacement.

Why it ranks #9: It has a Series 4 shaft and slip clutch, but the listing gives a 43–59-inch range and less complete connection detail.

A listed slip clutch is the distinguishing feature of this XXParts Series 4 PTO shaft, giving buyers a clutch-equipped option for tractor implements. Its 43-to-59-inch length and 1-3/8-inch six-spline tractor end establish two practical fit checks, while the round implement end and steel construction identify the stated driveline arrangement.

The 43-to-59-inch span offers a defined range for comparing shaft length with the tractor and implement connection distance. A 1-3/8-inch six-spline tractor end and round implement end describe the intended connection layout. The listing also specifies a slip clutch alongside a 20CrMnTi carburized-steel universal joint and Q345 steel tube inside the shield, making those components part of the Series 4 assembly. No horsepower or torque rating is supplied, so buyers cannot use this listing to verify a numerical capacity.

Skip it if you require a published horsepower or torque capacity; the ECCPP listing states ratings for both its shaft and clutch.

This XXParts option fits buyers seeking a slip-clutch Series 4 shaft with a 43-to-59-inch stated range. Its missing capacity figures are an important boundary: confirm that the available specifications suit your application before selection.

Listed on Amazon as: PTO Shaft PTO Drive Shaft 1-3/8" 6 Spline Endw/Slip Clutch T4 43"-59", Replacement for VEVOR OEM

#10 · Shortest Range

10. YIHETOP PTO Shaft

• Weight: 14.52 lb

Best for: Shorter six-spline connections.

Why it ranks #10: Its 31.5–43.5-inch length is the shortest listed range, but both ends are six-spline rather than the round implement end common here.

Six-spline ends on both sides distinguish this YIHETOP shaft from models with a round implement end, enabling a matching six-spline tool connection. Its 31.5-to-43.5-inch stated span targets shorter shaft layouts, while the 1-3/8-inch size identifies the nominal connection diameter for compatible tractors and tools.

Both ends use 1-3/8-inch six-spline connections, so the implement-side fitting must match that arrangement rather than a round end. The telescopic tube measures 31.5 inches minimum and 43.5 inches extended, a relatively short stated range for comparing tight equipment layouts. That compact length window also sets a clear boundary for installations needing more reach. The listing describes compatibility with tools and tractors of the same size and type, but supplies no horsepower or torque figures for capacity comparison.

Skip it if you need a round implement end or more than 43.5 inches of reach; the Hipicute lists a round end and extends to 55 inches.

Pick this YIHETOP when both tractor and tool accept 1-3/8-inch six-spline fittings and the short 31.5-to-43.5-inch range suits the layout. It is not the option for a round implement connection.

Listed on Amazon as: Pto Shaft Pto Drive Shaft 1-3/8" 6 Spline Both Ends 31.5"-43.5"