Best Screw Jack For Car: Compare 8 Mechanical Options

#1 · Best Overall

1. LUSHIH Car Jack

• Load Capacity: 4000 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Sport Utility Vehicle, Car,Truck
• Dimensions: 4.9 x 11.5 x 6.5 in

Best for: Tall-range SUV and truck jack.

Why it ranks #1: Its 4,000-pound rating and 7.76-to-16-inch range suit vehicle lifting, and it includes a handle set and storage bag.

A 7.76-to-16-inch lift range gives the LUSHIH screw jack useful height adjustment for listed SUVs, trucks, vans, and trailers. Its 4,000-pound capacity and welded forged-steel construction suit vehicle support tasks, while zinc powder coating is specified for resistance to rust and corrosion.

The mechanical spiral design avoids hydraulic operation, and the stated 4,000-pound capacity sets the load boundary for use on compatible vehicles. The 7.76-inch minimum and 16-inch maximum provide a wider working span than the 5-ton support jacks listed here, useful when the lift point calls for added height. A handle set and storage bag are included, supporting setup and packing; the supplied guidance calls for a level, hard surface and a stopped, secured vehicle.

Skip it if you need a 5-ton rating for heavier support work; the YELLOW JACKET ASJ05Y is rated for 10,000 pounds.

Choose the LUSHIH for an SUV, truck, van, or trailer when its 16-inch maximum and included handle set suit the job. Keep the 4,000-pound limit and required firm, level setup in view.

Listed on Amazon as: Car Jack 2 Ton Capacity for Pickup Truck 7.76”-16”

#2 · Longest Lift Range

2. LEADBRAND 2-Ton Jack

• Load Capacity: 2 ton
• Material: Alloy Steel
• Compatible with Vehicle Type: ATV, Car, Sport Utility Vehicle, Truck
• Dimensions: 6.3 x 4.6 x 8.16 in

Best for: Oil-free roadside lifting.

Why it ranks #2: This 2-ton mechanical jack lists an 8.16-to-19.09-inch lift range, the greatest stated maximum height among the vehicle-lifting options.

The LEADBRAND’s oil-free steel-gear mechanism avoids hydraulic fluid and seal failure, making it a mechanical option for emergency lifting. Its stated 2-ton capacity and 8.16-to-19.09-inch range cover a tall adjustment span, while the compact form is listed for trucks, SUVs, cars, ATVs, and trailers.

At a stated 4,000-pound capacity, this alloy-steel jack is suited to the listed vehicle and equipment types only when the load stays within its rating. Its 8.16-to-19.09-inch range gives room for higher lift points, and its mechanical gears avoid fluid-related maintenance concerns. The supplied operating guidance calls for a level, hard surface, diagonal wheel chocking, and placement at the designated lift point; those steps shape the roadside workflow before cranking.

Skip it if you need a 5-ton support rating; the Jack Boss ASJ05 offers 10,000-pound capacity for heavier loads.

The LEADBRAND fits drivers seeking an oil-free emergency jack with a tall stated range for compatible vehicles or equipment. Its 2-ton limit and need for a level, hard surface and wheel chocking define the use case.

Listed on Amazon as: 2 Ton Truck Jack Mechanical Screw Jack Oil Free 8.16"-19.09" Lift

#3 · Most Compact

3. USYATO 2-Ton Jack

• Load Capacity: 4409 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Off-Road Vehicle, Pickup, RV, Sport Utility…
• Dimensions: 4 x 4 x 7 in

Best for: Compact truck emergency jack.

Why it ranks #3: The listed 4-by-4-by-7-inch dimensions and 8-pound weight make it notably compact, with a stated 7-to-15.5-inch lifting range.

Its oil-free mechanical screw avoids hydraulic fluid leaks, while the 7-to-15.5-inch lifting range covers a useful span for truck and SUV roadside work. The inch-by-inch threaded lift prioritizes controlled movement over speed, and the compact 8-pound form is easier to keep in a vehicle than a bulky shop jack.

The 2-ton rating and alloy-steel construction suit the listed pickup, SUV, truck, van, RV, and off-road vehicle applications, subject to the vehicle’s lift-point requirements. Its 7-to-15.5-inch range gives more adjustment than a short-stroke support jack, while the mechanical screw avoids fluid and seal maintenance associated with hydraulics. At 8 pounds and 4 x 4 x 7 inches, it is practical to store in a truck; expect slower, manual cranking rather than a quick hydraulic lift.

Skip it if you need a 5-ton support jack for heavier loads; the Torin ASJ05B offers that higher stated capacity.

Choose the USYATO for a truck or SUV emergency kit when a compact, oil-free mechanical jack and broad height adjustment matter. Its 2-ton rating and slower screw lift are boundaries to weigh against the load and time available.

Listed on Amazon as: 2 Ton Spiral Jack Screw Jack for Truck SUV, 4000 lbs, 7-15.5" Lifting Range

#4 · Highest Rated Capacity

4. Torin ASJ05B

• Load Capacity: 5 Ton
• Material: Alloy Steel
• Compatible with Vehicle Type: Car
• Dimensions: 5.12 x 4.53 x 9.45 in

Best for: Five-ton swivel support jack.

Why it ranks #4: Its 5-ton rating exceeds the 2-ton spiral jacks, and its swivel anti-skid saddle and self-locking design target load support.

The Torin’s self-locking design adds a stated safety feature to its 5-ton capacity and swivel anti-skid saddle. That combination supports load positioning and leveling, while the 9.5-to-13.375-inch range targets car support or stabilization work rather than lifting from very low clearance.

Its alloy-steel construction, 10,000-pound rating, and bell-shaped cast base address substantial support tasks; the base measures 4.5 by 4.5 inches. A 360-degree swivel head with an anti-skid saddle can help position and level the load, and the self-locking design provides an additional safety feature. The 3.875-inch height span sets a firm working boundary. The product description explicitly says the handle is not included, so plan for that before setup.

Skip it if you need a jack supplied with its handle; the Jack Boss ASJ05 listing includes a housing and does not state this handle exclusion.

Choose the Torin for car support or stabilization when a 5-ton rating, self-locking design, and swivel saddle fit the task. Account for its 9.5-inch minimum height and the separately needed handle before setup.

Listed on Amazon as: Torin 5 Ton (10,000 LBs) Professional Car Support Screw Jack for House Construction Bridge Stabilization, Black, ASJ05B

#5

5. Jack Boss ASJ05

• Load Capacity: 5 tons
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: High-capacity load positioning.

Why it ranks #5: This 5-ton support jack has a 9.5-to-13.375-inch height range and a 360-degree swivel anti-skid saddle for positioning loads.

A 5-ton capacity paired with a 360-degree swivel anti-skid saddle makes the Jack Boss suitable for positioning and leveling substantial loads. Its bell-shaped cast base and corrugated steel support the setup, while the 9.5-to-13.375-inch height range targets work where that limited adjustment is sufficient.

The 10,000-pound rating and alloy-steel construction address heavy support work, including the stated house-construction and bridge-stabilization applications. A 4.5-inch square bell-shaped base provides a defined footprint, and the swivel anti-skid saddle helps with load positioning and leveling. The 9.5-inch minimum and 13.375-inch maximum height constrain where it can be placed, so check the required working height before use; its 9.26-pound weight is manageable for repositioning between jobs.

Skip it if you need a taller vehicle-lift range; the LUSHIH LX001 reaches 16 inches and is listed for SUVs and trucks.

Pick the Jack Boss for heavy support or stabilization where its 5-ton capacity, swivel saddle, and compact height range suit the setup. It is not the choice for work requiring greater lift height or a broad vehicle-specific range.

Listed on Amazon as: Jack Boss 5 Ton (10,000 LBs) Professional Car Support Screw Jack for House Construction Bridge Stabilization, Red

#6

6. YELLOW JACKET ASJ05Y

• Load Capacity: 5 tons
• Material: Alloy Steel
• Compatible with Vehicle Type: Car
• Dimensions: 11 x 5.7 x 5.5 in

Best for: Swivel-saddle support work.

Why it ranks #6: Its 5-ton capacity and 9.5-to-13.375-inch height match the support-jack format, but the supplied details do not list a handle.

The YELLOW JACKET pairs a 5-ton rating with a 360-degree swivel anti-skid saddle, helping position and level loads during support work. Its bell-shaped cast base and 9.5-to-13.375-inch height range make it a focused option for jobs that need substantial capacity without a tall lift.

For listed car applications, the alloy-steel jack’s 10,000-pound capacity provides substantial support, while the 4.5-by-4.5-inch base gives a clear footprint to account for during setup. Its swivel saddle is intended to ease load leveling and precise positioning, rather than simply raise a vehicle quickly. The 3.875-inch working height span is the key fit boundary: confirm the intended support point falls between 9.5 and 13.375 inches before choosing it.

Skip it if you need a jack that starts below 9.5 inches; the USYATO Jack-2T starts at 7 inches.

The YELLOW JACKET suits buyers needing a 5-ton support jack for a car or stabilization task where swivel positioning is useful. Its minimum 9.5-inch height and limited travel make working-height compatibility essential.

Listed on Amazon as: YELLOW JACKET 5 Ton Professional Car Support Screw Jack for House Construction Bridge Stabilization, Yellow (10,000 LBs)

#7

7. JET SJ-5T

• Load Capacity: 5 Tons
• Material: Steel
• Compatible with Vehicle Type: Truck
• Dimensions: 5.9 x 6 x 10.8 in

Best for: Five-ton industrial load support.

Why it ranks #7: The 5-ton steel jack has a pivoting corrugated head and cast bell-shaped base, but its turning bar is sold separately.

The JET SJ-5T’s corrugated pivoting head contours to the load for greater surface contact, while its cast bell-shaped base supports stability. Rated at 5 tons, it also has an industrial design specified to prevent creeping while holding heavy loads, making it suited to demanding support work.

The pivoting head’s corrugations help the contact surface follow the load, and the bell-shaped cast base provides a stable foundation across multiple lifting environments. JET says the design requires less effort to raise a maximum-capacity load and eliminates creeping while holding heavy loads, benefits relevant to repeated support tasks. Its 5-ton rating and ANSI/ASME B30.1 compliance are useful selection facts, but the turning bar is sold separately and must be accounted for.

Skip it if you need a stated 10-ton capacity; the JET SJ-10T supports twice this model’s rated load.

The JET SJ-5T suits buyers supporting truck or other heavy loads who value a pivoting contact head and non-creeping hold. Its 5-ton ceiling and separately sold turning bar are important setup boundaries.

Listed on Amazon as: JET 5-Ton Screw Jack (Model SJ-5T)

#8

8. JET SJ-10T

• Load Capacity: 10 Ton
• Material: Steel
• Compatible with Vehicle Type: Truck
• Dimensions: 6.4 x 6.6 x 12.7 in

Best for: Ten-ton heavy-load support.

Why it ranks #8: Its 10-ton capacity is the highest listed, but it is designed for heavy-load support and is a less direct fit for ordinary car lifting.

The JET SJ-10T’s 10-ton rating distinguishes it for heavier support tasks, while its corrugated pivoting head contours to the load for maximum surface contact. A cast bell-shaped base adds a stable foundation, and the industrial design is specified to prevent creeping while holding heavy loads.

The 10-ton capacity makes this a higher-rated choice than the listed JET SJ-5T, while the pivoting corrugated head helps maintain broad contact as it contours to the load. Its cast bell-shaped housing provides a stable base across multiple lifting environments, and JET says the design reduces effort when raising a maximum-capacity load. Compliance with ANSI/ASME B30.1 adds a stated standard reference. At 14.8 pounds, it is heavier to move, and its turning bar is sold separately.

Skip it if you need a lighter 5-ton support jack; the Torin ASJ05B weighs 8.6 pounds and has the lower rating.

Choose the JET SJ-10T for heavy-load support where its 10-ton capacity, pivoting contact head, and stated non-creeping hold suit the job. Its 14.8-pound weight and separately sold turning bar affect handling and setup.

Listed on Amazon as: JET 10-Ton Screw Jack (Model SJ-10T)