Best Fender For A Car: Compare Vehicle-Specific Replacements

#1 · Best Overall

1. Garage-Pro Corolla Fender

• Material: Steel
• Compatible with Vehicle Type: Car
• Dimensions: 38.17 x 33.96 x 7 in

Best for: Corolla passenger-side replacement.

Why it ranks #1: Direct-fit primed steel panel for the Corolla front passenger side; the listing specifies trims, engine options, and Japan or North America build compatibility.

Direct-fit construction for specified 2009–2013 Toyota Corolla trims makes this primed steel fender a focused passenger-side repair option. Its fit listing covers several trim levels and both Japan- and North America-built models, while the stated exclusions clarify which exterior features the replacement does not accommodate.

The direct-fit specification and listed Corolla years and trims help narrow the application to the stated 2009–2013 range, including Base, L, XLE, XRS, CE, LE, and S. Steel construction supplies the panel material, and the primed finish gives a paint-preparation starting point. It is for the front passenger side and has neither molding holes nor a turn-signal-light hole, so those details matter when matching the existing panel. The listing also specifies interchangeability between US- and Japan-built models.

Skip it if you need molding or turn-signal-light openings; the listed Garage-Pro 2012–2014 Camry fender is a different application, not a Corolla substitute.

Corolla owners repairing the front passenger side can consider this when their 2009–2013 trim and build origin match the listing. Its primed steel panel is a paint-preparation starting point, but confirm the no-hole configuration suits the existing fender.

Listed on Amazon as: Garage-Pro Fender For Toyota Corolla 2009-2013 Front, Passenger Side

#2 · CAPA-Certified Pick

2. Garage-Pro Camry Fender

• Material: Steel
• Compatible with Vehicle Type: Car
• Dimensions: 47.91 x 31.12 x 6.97 in

Best for: CAPA-certified Camry driver side.

Why it ranks #2: This primed steel front driver-side replacement fits the specified Camry range and is identified as CAPA certified, a useful distinction for buyers seeking certification.

CAPA certification is the defining specification of this primed steel fender for 2012–2014 Toyota Camry models. Its front driver-side placement and listed interchange numbers give repair shoppers concrete identifiers to use when narrowing the replacement, while the primed finish supports paint preparation.

The stated 2012–2014 Camry application and front driver-side orientation help buyers identify the intended panel position and model years. CAPA certification is explicitly listed, adding a named certification detail for shoppers comparing replacement parts. Steel construction supplies the material, and the primed surface is described as ready to paint, which informs the finishing workflow after installation. Interchange numbers 5381206150 and TO1240239 provide additional matching references for checking the part against the vehicle’s repair requirements.

Skip it if you need a passenger-side panel; the Garage-Pro Corolla 2009–2013 passenger-side fender serves that side, but fits a different vehicle.

Camry owners repairing the front driver side within the listed 2012–2014 years can consider this CAPA-certified steel panel. Its primed finish is ready for paint, but the stated year range is the application boundary.

Listed on Amazon as: Garage-Pro Fender Compatible with 2012-2014 Toyota Camry Front, Driver Side CAPA Primed

#3

3. Garage-Pro Accord Fender

• Material: Steel
• Compatible with Vehicle Type: Sedan
• Dimensions: 57.19 x 37.62 x 9.84 in

Best for: Accord sedan passenger-side panel.

Why it ranks #3: A primed steel front passenger-side fender for specified Accord trims and sedan body style, with an OE number and interchange number for fitment checks.

A stated direct-fit application for 2008–2012 Honda Accord sedans makes this primed steel fender a targeted front passenger-side replacement. The listing names six trims and specifies a four-door sedan, helping buyers distinguish it from a panel intended for a different Accord body style or side.

The application covers EX, EX-L, HFP, LX, LX-P, and SE trims from 2008–2012, and the listing specifies a four-door sedan. That vehicle and body-style detail helps focus compatibility checks before repair. Steel construction provides the panel material, while the primed finish offers a surface ready for paint preparation. This is the front passenger-side fender, and it has no molding holes, so buyers should account for that configuration when matching the damaged panel and its exterior trim.

Skip it if you need a driver-side Accord panel; the Garage-Pro 2012–2014 Camry fender is also driver-side, but fits a different vehicle.

Choose this for a listed 2008–2012 four-door Accord trim needing a front passenger-side fender. The primed steel panel supports a paint-preparation workflow, while its no-molding-hole configuration is an important boundary for matching the car.

Listed on Amazon as: Garage-Pro Fender For Honda Accord 2008-2012 Front, Passenger Side

#4 · Two-Side Set

4. Evan Fischer Chrysler 300 Fender Set

• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Chrysler 300 two-side repair.

Why it ranks #4: The listing identifies a front driver and passenger side set for the Chrysler 300, useful when both front panels need replacement; material is alloy steel.

A set of two fenders for 2011–2022 Chrysler 300 applications makes this Evan Fischer listing suited to repairs involving both front sides. The primed panels use alloy steel, combining a stated paint-preparation finish with a specified material for buyers planning a paired replacement.

The title identifies the application as a 2011–2022 Chrysler 300 and the contents as a driver- and passenger-side set of two. That paired format supports replacing both listed sides in one repair plan rather than sourcing each side separately. Primed finish provides a starting point for paint preparation, while alloy steel is the specified material. The supplied specifications identify the parts as compatible with cars; buyers should still match the stated vehicle range and side requirements to their repair.

Skip it if you need only one side; the Garage-Pro 2009–2013 Mazda 6 RH fender is a single-side listing for a different vehicle.

This set suits Chrysler 300 owners planning a two-side repair within the listed 2011–2022 range. Its primed alloy-steel panels fit a paint-preparation workflow, while buyers replacing only one side should weigh the paired format.

Listed on Amazon as: Evan Fischer Front, Driver and Passenger Side Fender Set of 2 Compatible with 2011-2022 Chrysler 300 Primed – CH1241277, CH1240277

#5

5. Garage-Pro Mazda 6 Fender

• Material: Steel
• Compatible with Vehicle Type: Car
• Dimensions: 52.8 x 32.5 x 15.4 in

Best for: USA-built Mazda 6 RH fender.

Why it ranks #5: Primed steel fender listed for USA-built Mazda 6 models, with an interchange number and a one-year warranty when purchased through Auto Parts Giant.

Compatibility specifically limited to USA-built 2009–2013 Mazda 6 models makes this primed steel RH fender a focused replacement choice. The build-origin qualification is central to matching the panel, while the stated paint-ready finish helps set expectations for the repair’s finishing steps.

The listing specifies 2009–2013 Mazda 6 models made in the USA and identifies the panel as RH, giving buyers both a year range and a build-origin condition to check. Steel construction provides the stated material, while the primed surface is described as ready to paint, supporting paint preparation after installation. Interchange numbers GS3L52110A and MA1241160 offer additional references when matching the part. The USA-built qualification is a meaningful fit boundary, not a general Mazda 6 application.

Skip it if you need a driver-side panel; the Garage-Pro Camry 2012–2014 front driver-side fender identifies that side, but fits a different vehicle.

Owners of USA-built 2009–2013 Mazda 6 models needing an RH fender can consider this primed steel panel. Its paint-ready finish supports preparation, but the stated build-origin condition is essential to application matching.

Listed on Amazon as: Garage-Pro Fender for MAZDA 6 2009-2013 RH Steel USA Built

#6

6. HECASA Malibu Fender

• Material: Steel
• Compatible with Vehicle Type: Compatible with 2013-2016 Chevrolet Malibu

Best for: Malibu driver-side steel fender.

Why it ranks #6: Steel front left, driver-side panel fits listed Malibu variants and Malibu Limited; the listing notes that it lacks molding and flare holes.

Compatibility spanning specified 2013–2016 Chevrolet Malibu variants makes this steel front-left fender a broad-year option within its listed range. The driver-side designation and explicit no-molding-hole, no-flare-hole configuration help buyers assess whether its panel layout matches the vehicle before beginning a repair.

The application includes 2013–2014 Malibu Eco, 2013–2015 LS, LT, and LTZ models, plus the 2016 Malibu Limited in LS, LT, and LTZ trims. That detailed year and trim coverage helps buyers screen for the right variant. Steel construction and a smooth black electrophoretic coating are stated, with the coating providing a finished surface as supplied. The panel is front left, or driver side, and has no molding or flare holes, a key constraint when matching existing trim.

Skip it if you need molding or flare openings; the Garage-Pro Corolla 2009–2013 passenger-side fender is another listed panel, but fits a different car.

Malibu owners needing a front driver-side panel can use the year and trim list to check this option against their vehicle. The coated steel construction is specified, but its no-hole layout must match the original fender.

Listed on Amazon as: HECASA Fender Compatible with 2013-2015 Malibu

#7

7. Garage-Pro Frontier Fender

• Material: Steel
• Compatible with Vehicle Type: Truck
• Dimensions: 47.62 x 38.03 x 8.35 in

Best for: Frontier and Pathfinder RH panel.

Why it ranks #7: Primed steel right-hand fender is listed for Nissan Frontier and Pathfinder fitment, but its truck applications make it less suitable for a car-focused search.

A right-hand-side application covering specified Nissan Frontier and Pathfinder years makes this primed steel fender useful for shoppers comparing two listed vehicle lines. Its steel construction and paint-ready description support a straightforward panel-replacement workflow, while the model-year coverage deserves close attention.

The listing covers 2005–2021 Nissan Frontier models and 2005–2012 Pathfinder models, with the title identifying the part as RH. That year and side information helps narrow the intended position and vehicle application. Steel is the stated material, and the primed surface is described as ready to paint, supporting the finishing process after the panel is fitted. Interchange numbers 63100ZL15A and NI1241184 provide additional identifiers for matching the replacement to the repair.

Skip it if you need a left-side panel; the HECASA 2013–2016 Malibu front-left fender names that side, but fits a different vehicle.

Nissan owners repairing the RH side of a listed Frontier or Pathfinder can use the supplied year ranges to assess this steel panel. Its primed finish is ready to paint, with Pathfinder coverage ending at 2012.

Listed on Amazon as: Garage-Pro Fender for NISSAN FRONTIER 2005-2018 RH

#8

8. Crown Automotive Fender

• Material: Aluminum
• Compatible with Vehicle Type: Truck
• Dimensions: 48 x 20.5 x 19.5 in

Best for: Aluminum truck replacement panel.

Why it ranks #8: This black aluminum replacement is specified for trucks, not cars, and the listing provides no particular vehicle model or fitment range.

Aluminum construction distinguishes this Crown Automotive fender for truck applications, while its direct-replacement description points to a replacement-part role. The supplied listing identifies it as vehicle-specific but does not name a truck model, so the application details need particular attention before selecting it.

The listing calls this a direct replacement and identifies the compatible vehicle type as truck, which frames its intended use without naming a specific make or model. Aluminum is the stated material, distinguishing its construction from the steel panels elsewhere in this roundup. Its black color and 48-by-20.5-by-19.5-inch dimensions are also supplied, helping buyers review the item’s physical description and handling needs. The vehicle-specific fit claim alone does not identify an application, so the model must be established before purchase.

Skip it if you need a named application before choosing; the Garage-Pro Nissan Frontier 2005–2018 RH fender specifies a truck model and side.

This may suit a truck owner who can independently establish the vehicle-specific application and wants an aluminum replacement panel. Because no compatible model is named in the supplied listing, application matching is the key boundary.

Listed on Amazon as: Crown Automotive J5758618 Fender, Black