A strong power leveling jack setup should match your RV’s support needs, available mounting points, and preferred setup method; powered stabilizers suit campers who want to avoid manual cranking. This roundup compares two powered options with drill-ready and hand-cranked scissor jacks, plus replacement and screw-jack designs. The Lippert PSX1 leads for switch-operated stabilization, while the SEAFLO adds a dual-motor electric system with a stated 4,000-pound static load capacity.
For buyers prioritizing a multi-jack kit, several steel scissor sets include four jacks and a drill socket. Note that stabilizers are not automatically substitutes for leveling systems or lifting jacks: check the product’s intended use and your RV’s requirements before installing or operating one.
The Lippert PSX1 High-Speed RV Power Stabilizer is the best overall match for shoppers seeking power leveling jacks for an RV because it replaces manual cranking with switch-operated stabilization and has independently operating legs designed to adjust to uneven terrain. It is a stabilizer, not a complete leveling system, so confirm that this type of support meets your vehicle’s setup needs. For a 12-volt electric alternative, the SEAFLO has a dual-motor design and a stated 4,000-pound static load capacity.
Our Top Picks
Best OverallSwitch-operated power stabilization eliminates manual cranking, and independently operating legs are designed to adjust to uneven terrain.
View on Amazon
Best Dual-MotorThis 12-volt powered stabilizer includes a dual-motor jack, switches, and waterproof reset breakers, with a stated 4,000-pound static load capacity.
View on Amazon
Tallest Electric LiftThis electric replacement jack stand has a stated 30-inch lift height and independently operating legs, though its listed capacity is 2,000 pounds.
View on Amazon- Highest Listed Capacity LIBRA Scissor Jacks
- Soft-Ground Base ROCKMAN Scissor Jacks
Compare RV Stabilizer and Leveling Jack Options
| # | Product | Dimensions | Load Capacity | Material | Compatible with Vehicle Type | Buy |
|---|---|---|---|---|---|---|
| 1 | 1. Lippert PSX1 StabilizerBest Overall | 79 x 6.25 x 19 in | — | Steel | Trailer | View on Amazon |
| 2 | 2. SEAFLO Electric StabilizerBest Dual-Motor | 37 x 14 x 4 in | 4000 lb | Heavy-Gauge Powder-Coated Steel | RV, Trailer, Camper | View on Amazon |
| 3 | 3. Orvex Power StabilizerTallest Electric Lift | — | 2000 lbs | — | RV | View on Amazon |
| 4 | 4. LIBRA Scissor JacksHighest Listed Capacity | 26.5 x 2.25 x 24 in | 9000 lb | Alloy Steel | Camper, RV, Trailer | View on Amazon |
| 5 | 5. ROCKMAN Scissor JacksSoft-Ground Base | 26.5 x 2.25 x 24 in | 7500 lb | Alloy Steel | Trailer | View on Amazon |
| 6 | 6. Kohree 6500 Scissor JacksFour-jack manual-or-drill kit | 26.77 x 826 x 15.74 in | 6500 lb | Alloy Steel | Camper, RV, Trailer | View on Amazon |
| 7 | 7. OULEME Scissor JacksFour-jack wide-base kit | 27.1 x 19.09 x 5 in | 6500 LBS | Alloy Steel | RV | View on Amazon |
| 8 | 8. Kohree 7500 Scissor JacksTwo-jack drill-assisted setup | 26 x 7 x 24 in | 7500 lb | Alloy Steel | Camper, RV, Trailer | View on Amazon |
| 9 | 9. SHALL Screw JacksCompact-height screw jack set | 6.9 x 7 x 14.9 in | 7500 lb | Aluminum | RV, Trailer | View on Amazon |
| 10 | 10. Lippert Level Up Hydraulic JackLevel Up hydraulic replacements | 21.25 x 9 x 9 in | 8000 lb | Aluminum | Trailer | View on Amazon |
Detailed Reviews: Best Power Leveling Jacks For RV

#1 · Best Overall
1. Lippert PSX1 Stabilizer
- Dimensions: 79 x 6.25 x 19 in
- Material: Steel
- Compatible with Vehicle Type: Trailer
Best for: Uneven-terrain powered stabilizing.
Why it ranks #1: Switch-operated power stabilization eliminates manual cranking, and independently operating legs are designed to adjust to uneven terrain.
Independent legs are the defining feature of Lippert’s PSX1: each adjusts to the ground beneath it, helping stabilize a trailer on uneven or rugged terrain without manual cranking. Its powered operation is aimed at campers who want a quicker setup routine, while the heavy-gauge steel construction suits regular outdoor use.
The independently operating legs can respond to uneven ground individually, which helps the stabilizer settle across a varied campsite rather than relying on a single adjustment point. Lippert describes the PSX1 as a high-speed power stabilizer operated with a switch, offering a less labor-intensive setup than manual cranking. Its steel construction and embossed legs add structural reinforcement, while the 79-inch length is an important installation dimension to consider for the trailer’s stabilizer area.
- Independent legs adjust to uneven terrain
- Powered operation avoids manual cranking
- Heavy-gauge steel construction
- Embossed legs add reinforcement
- The No Switch style does not include a switch.
Skip it if you need a complete switch-equipped kit; the LIBRA 26093 includes four manually operated jacks and a drill socket.
Choose the PSX1 if reducing manual stabilizer cranking is a priority and independent adjustment suits your trailer’s campsite conditions. Check the No Switch configuration and its 79-inch length against your installation requirements before choosing it.
Full product details
| Brand | Lippert Components |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Trailer |
| Included Components | Power Stabilizer |
| Item Dimensions | 79 x 6.25 x 19 inches |
| Dimensions | 79 x 6.25 x 19 inches |
| Manufacturer | Lippert |
| Part Number | 337199 |
| Manufacturer Warranty Description | 1 Year |
| Material | Steel |
| Model Number | 337199 |
| Style Name | No Switch |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including styrene which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov |
Listed on Amazon as: Lippert PSX1 High-Speed RV Power Stabilizer, No Switch, 337199
View on Amazon
#2 · Best Dual-Motor
2. SEAFLO Electric Stabilizer
- Dimensions: 37 x 14 x 4 in
- Load Capacity: 4000 lb
- Material: Heavy-Gauge Powder-Coated Steel
- Compatible with Vehicle Type: RV, Trailer, Camper
Best for: 12-volt powered jack buyers.
Why it ranks #2: This 12-volt powered stabilizer includes a dual-motor jack, switches, and waterproof reset breakers, with a stated 4,000-pound static load capacity.
A 12-volt electric drive is the SEAFLO jack’s defining feature, enabling powered stabilization for RV, camper, and trailer owners who want to avoid manual jack operation. Its listed 4,000-pound static load capacity, heavy-gauge powder-coated steel, and waterproof motor frame the choice for powered outdoor use.
The electric powered mechanism supports a less manual setup routine, while the included pair of waterproof stabilizer switches provides the stated controls for the dual-motor jack. SEAFLO lists a 4,000-pound static load capacity, giving buyers a concrete limit to compare with their application. Heavy-gauge powder-coated steel is specified for corrosion resistance, and the supplied IP66 waterproof reset breakers add protected electrical components to the package.
- 12-volt electric powered operation
- 4,000-pound static load capacity
- Heavy-gauge powder-coated steel
- Includes two IP66 waterproof switches and reset breakers
- The listed 4,000-pound capacity is lower than the capacities of several scissor-jack sets here.
Skip it if you need a higher listed capacity than 4,000 pounds; the LIBRA 26093 lists a 9,000-pound capacity.
The SEAFLO is for RV, camper, or trailer owners seeking 12-volt powered stabilization and supplied waterproof electrical controls. Its 4,000-pound static capacity is a key boundary to weigh against your application.
Full product details
| Brand | SEAFLO |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | RV, Trailer, Camper |
| Included Components | (2) IP66 Waterproof Reset Breakers, (2) IP66 Waterproof Stabilizer Switches, Dual Motor Jack |
| Item Dimensions | 37 x 14 x 4 inches |
| Item Weight | 20.62 kg |
| Load Capacity | 4000 pounds |
| Manufacturer | PTLIHU |
| Part Number | SFSJ1-4000-600-01 |
| Material | Heavy-Gauge Powder-Coated Steel |
| Model Number | SFSJ1-4000-600-01 |

#3 · Tallest Electric Lift
3. Orvex Power Stabilizer
- Load Capacity: 2000 lbs
- Compatible with Vehicle Type: RV
Best for: 298707 electric replacement buyers.
Why it ranks #3: This electric replacement jack stand has a stated 30-inch lift height and independently operating legs, though its listed capacity is 2,000 pounds.
A 30-inch maximum lift height and independent electric legs define the Orvex 298707 replacement kit, enabling switch-operated stabilization that adapts to uneven terrain. It is aimed at RV owners seeking a replacement jack stand compatible with 298707, with a listed 2,000-pound capacity and black exterior switch.
The electric operation replaces manual cranking with switch control, while independently operating legs can adjust to uneven surfaces. The listed maximum lift height of 30 inches gives buyers an adjustment figure to compare with their trailer setup, and the 2,000-pound capacity is a key application limit. Heavy-duty steel with a black powder-coated exterior supplies the stated rugged construction. This listing identifies the unit as a replacement fitting 298707, so replacement compatibility is central to its use.
- Electric switch-operated adjustment
- Independent legs adapt to uneven terrain
- 30-inch maximum lift height
- Heavy-duty steel with powder-coated finish
- The listed capacity is 2,000 pounds.
Skip it if you need a listed capacity above 2,000 pounds; the Lippert PSX1 offers powered stabilization for trailer buyers.
Consider the Orvex when replacing a 298707 jack stand and seeking electric, switch-operated adjustment with independent legs. Its 2,000-pound capacity and 30-inch maximum height are important limits to match to your setup.
Full product details
| Brand | Orvex |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | RV |
| Included Components | 298707 Jack Stand |
| Load Capacity | 2000 lbs |
| Manufacturer | ZORVEX |
| Part Number | 298707 |
| Manufacturer Warranty Description | 1 years |
| Model Number | 298707 |
Listed on Amazon as: Power Stabilizer Jack Stand Kit Fits for 298707, Electric RV Trailer Jack with Black Exterior Switch, 2000 lbs Capacity 30′′ Lift Height for Camper Leveling
View on Amazon
#4 · Highest Listed Capacity
4. LIBRA Scissor Jacks
- Dimensions: 26.5 x 2.25 x 24 in
- Load Capacity: 9000 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Camper, RV, Trailer
Best for: Four-jack drill-ready setup.
Why it ranks #4: The four-jack set lists 9,000 pounds capacity and includes a 3/4-inch magnetic socket for power-drill operation.
A four-jack set and included magnetic 3/4-inch hex socket make the LIBRA 26093 a practical choice for RV owners who want to use a power drill during setup. Its 9,000-pound capacity and 11-gauge steel construction suit buyers seeking a heavy-duty scissor-jack set for a camper, RV, or trailer.
The four included steel jacks let buyers outfit multiple support points with one set, and the supplied magnetic socket enables power-drill operation instead of relying only on a hand crank. LIBRA lists a 9,000-pound load capacity and alloy-steel construction, useful specifications for buyers comparing heavy-duty supports. The 24-inch jack height provides adjustment range, while the set’s 58-pound listed weight is worth accounting for when handling or storing it.
- Four steel scissor jacks in one set
- 9,000-pound listed load capacity
- Includes 3/4-inch magnetic socket for drill operation
- 11-gauge steel construction
- The 58-pound set weight makes carrying and handling less convenient.
Skip it if you want electric switch-operated stabilization rather than drill-driven jacks; the Lippert PSX1 uses powered operation.
This LIBRA set fits RV and trailer owners who need four scissor jacks and prefer drill-assisted setup. Its substantial listed capacity and steel build come with a 58-pound set weight, so consider handling and storage.
Full product details
| Brand | LIBRA |
|---|---|
| Color | black |
| Compatible with Vehicle Type | Camper, RV, Trailer |
| Item Dimensions | 26.5 x 2.25 x 24 inches |
| Item Weight | 58 pounds |
| Load Capacity | 9000 pounds |
| Manufacturer | Libra |
| Part Number | 26098 |
| Manufacturer Warranty Description | one year limited warranty |
| Material | Alloy Steel |
| Model Number | 26093 |
| Style Name | Scissor Jack |
Listed on Amazon as: LIBRA 9K lb HD 24" RV Trailer Camper Stabilizer Leveling Scissor Jacks,Set4
View on Amazon
#5 · Soft-Ground Base
5. ROCKMAN Scissor Jacks
- Dimensions: 26.5 x 2.25 x 24 in
- Load Capacity: 7500 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Trailer
Best for: Soft-ground bow-tie bases.
Why it ranks #5: Its four steel scissor jacks list 7,500 pounds capacity and feature wide bow-tie bases intended to improve stability on soft ground.
Wide bow-tie bases are the ROCKMAN set’s key advantage for buyers setting up on soft or uneven ground, where a broader footprint can help steady a trailer. The four reinforced-steel scissor jacks offer a listed 7,500-pound capacity and electrophoresis-coated surfaces for outdoor use.
The bow-tie base is specifically intended to improve stability on soft ground, making campsite surface a useful factor when considering this set. Reinforced heavy-duty steel provides the jack structure, and the electrophoresis coating is described as supporting long-lasting durability and rust resistance. Four jacks come in the package, with a 24-inch size for buyers evaluating available clearance and extension needs. These are stabilizers, not vehicle-lifting equipment, so their use should remain limited to stabilization and leveling.
- Wide bow-tie bases for soft or uneven ground
- Four scissor jacks included
- 7,500-pound listed capacity
- Electrophoresis-coated reinforced steel
- These stabilizers must not be used to lift a vehicle or change tires.
Skip it if you need jacks for tire changes or lifting a vehicle; the ROCKMAN set is limited to stabilization and leveling.
The ROCKMAN four-pack suits RV and trailer owners who prioritize wide bases on soft or uneven campsites. Keep its stated role in mind: it is for stabilizing and leveling, not lifting vehicles or changing tires.
Full product details
| Brand | ROCKMAN |
|---|---|
| Color | black |
| Compatible with Vehicle Type | Trailer |
| Item Dimensions | 26.5 x 2.25 x 24 inches |
| Item Weight | 40 pounds |
| Load Capacity | 7500 pound |
| Manufacturer | Rockman |
| Part Number | 26090 |
| Material | Alloy Steel |
| Model Number | 26090 |
| Style Name | Scissor Jack |
Listed on Amazon as: 24" 7500lbs RV Camper Trailer Stabilizer Leveling Scissor Jacks PK4
View on Amazon
#6
6. Kohree 6500 Scissor Jacks
- Dimensions: 26.77 x 826 x 15.74 in
- Load Capacity: 6500 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Camper, RV, Trailer
Best for: Four-jack manual-or-drill kit.
Why it ranks #6: The four-pack lists 6,500 pounds capacity and a 24-inch maximum height, with both a crank handle and drill bit included.
Kohree’s four-jack package includes both a crank handle and a drill bit, giving RV owners a choice between manual adjustment and power-drill operation. With 24 inches of maximum height and a listed 6,500-pound capacity, it serves campers looking for a steel scissor-jack set with two setup methods.
The crank handle supports manual raising and lowering, while the included drill bit lets owners use a power drill when they want a different operating workflow; the drill itself is not included. Each jack extends to a maximum 24 inches and retracts to 4 inches high, helping buyers assess clearance and adjustment range. Electrophoresis-coated heavy-duty steel adds a protective surface, and the four-pack equips multiple trailer support points.
- Four scissor jacks included
- Crank handle and drill bit supplied
- 24-inch maximum height
- Electrophoresis-coated heavy-duty steel
- The power drill needed for drill operation is not included.
Skip it if you need a drill included with your four-jack kit; the OULEME 6500lbs-4 Pack also supplies mounting screws and an instruction manual.
Choose the Kohree KR1225 if you want four steel jacks and the option of hand-crank or drill-bit operation. The included bit does not include a power drill, so bring one if you plan to use that method.
Full product details
| Brand | Kohree |
|---|---|
| Color | Black-4Pack |
| Compatible with Vehicle Type | Camper, RV, Trailer |
| Included Components | 1 crank handle, 1 drill bit, 4 Pack RV Jack |
| Item Dimensions | 26.77 x 826 x 15.74 inches |
| Item Weight | 48.7 pounds |
| Load Capacity | 6500 Pounds |
| Manufacturer | Kohree |
| Part Number | KR1225-KO-CA-FBA |
| Manufacturer Warranty Description | Kohree Service |
| Material | Alloy Steel |
| Model Number | KR1225 |
| Style Name | Scissor Jack |
Listed on Amazon as: Kohree 6500 lbs RV Stabilizer Jacks 4 Pack, 24" Leveling Scissor Jack
View on Amazon
#7
7. OULEME Scissor Jacks
- Dimensions: 27.1 x 19.09 x 5 in
- Load Capacity: 6500 LBS
- Material: Alloy Steel
- Compatible with Vehicle Type: RV
Best for: Four-jack wide-base kit.
Why it ranks #7: This four-pack adjusts from 4 to 24 inches and includes a crank, drill socket, mounting screws, and a stated two-year manufacturer warranty.
An extra-wide base plate and 4-to-24-inch adjustment range make the OULEME four-pack a useful option for RV owners comparing support across different trailer heights. The kit includes a crank handle, 3/4-inch drill socket, mounting screws, and instructions, alongside a listed 6,500-pound capacity.
The wide base plate is specified to provide stability under load, while adjustment from 4 to 24 inches gives buyers a defined range for different trailer frames. The four-jack package includes a manual crank handle for hand adjustment and a 3/4-inch drill socket for power-assisted operation. Sixteen mounting screws and an instruction manual are also supplied, helping buyers plan installation from the included kit rather than sourcing those listed items separately.
- Four scissor jacks included
- Adjustment range from 4 to 24 inches
- Extra-wide base plate
- Includes crank handle, drill socket, screws, and instructions
- The listed capacity is 6,500 pounds, below the LIBRA 26093’s 9,000 pounds.
Skip it if you need a higher listed capacity than 6,500 pounds; the LIBRA 26093 lists 9,000 pounds and includes four jacks.
The OULEME kit suits owners who want four jacks, a broad adjustment range, and both hand and drill-socket operation. Check the 6,500-pound listed capacity and installation dimensions against your trailer.
Full product details
| Brand | OULEME |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | RV |
| Included Components | Complete Kit: Includes 1 manual crank handle, 1 drill socket (3/4"), 16 mounting screws (3/8"), and a detailed instruction manual — ready to use out of the box. |
| Item Dimensions | 27.1 x 19.09 x 5 inches |
| Load Capacity | 6500 LBS |
| Manufacturer | OULEME |
| Part Number | TD-RSJ120L-4 |
| Manufacturer Warranty Description | 2 Year Manufacturer |
| Material | Alloy Steel |
| Model Number | 6500lbs-4 Pack |
| Style Name | scissor |
Listed on Amazon as: 6500 lbs RV Camper Scissor Jack, 24" Trailer Leveling Stabilizer 4PK
View on Amazon
#8
8. Kohree 7500 Scissor Jacks
- Dimensions: 26 x 7 x 24 in
- Load Capacity: 7500 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Camper, RV, Trailer
Best for: Two-jack drill-assisted setup.
Why it ranks #8: The two-jack set lists 7,500 pounds capacity and a 24-inch maximum height, with a crank handle and drill socket included.
Kohree’s two-jack set combines a 7,500-pound listed capacity with both a crank handle and drill socket, giving owners manual and power-drill setup options. Its 24-inch maximum height and electrophoresis-coated steel make it a focused choice for RVers who need a pair rather than a four-jack kit.
The included crank handle allows manual adjustment, while the supplied drill socket supports power-drill operation; the drill itself is not included. A 24-inch maximum height and 4-inch retracted height help buyers check extension range and stored clearance around the trailer. The two-jack package keeps the set smaller than a four-jack kit, and the alloy-steel construction with an electrophoresis surface is specified for durability.
- Two scissor jacks included
- 7,500-pound listed capacity
- Crank handle and drill socket supplied
- 24-inch maximum height
- The set includes only two jacks, not a four-jack package.
Skip it if you need four jacks in one package; the Kohree KR1225 includes four jacks with a crank handle and drill bit.
This Kohree set fits owners who need two jacks and value having both hand-crank and drill-socket options. Choose it with its two-jack quantity and 24-inch maximum height in mind.
Full product details
| Brand | Kohree |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Camper, RV, Trailer |
| Included Components | 2X Scissor jacks, 1X Crank handle, 1X Drill Socket |
| Item Dimensions | 26 x 7 x 24 inches |
| Item Weight | 25.4 pounds |
| Load Capacity | 7500 pounds |
| Manufacturer | Kohree |
| Part Number | HY1700-KO-CA-FBA |
| Manufacturer Warranty Description | No |
| Material | Alloy Steel |
| Model Number | HY1700-KO-US-FBA-1 |
| Style Name | Scissor Jack |
Listed on Amazon as: Kohree 7500lbs RV Stabilizer Leveling Scissor Jacks 24", Set of 2
View on Amazon
#9
9. SHALL Screw Jacks
- Dimensions: 6.9 x 7 x 14.9 in
- Load Capacity: 7500 lb
- Material: Aluminum
- Compatible with Vehicle Type: RV, Trailer
Best for: Compact-height screw jack set.
Why it ranks #9: Four lightweight aluminum screw jacks adjust from 11 to 17 inches and list 7,500 pounds of support per jack; they are for stabilization only.
An 11-to-17-inch adjustment range sets the SHALL four-pack apart for RV owners whose support points need a more compact height window than taller scissor jacks provide. Each aluminum screw jack is listed to support up to 7,500 pounds, with included pads and spare nuts for the set.
The screw-style adjustment spans 11 to 17 inches, giving buyers a defined range for matching these stands to their trailer’s support points. The four aluminum jacks are each listed for up to 7,500 pounds of support, and the die-cast construction is described as rust-proof and scratch-resistant. Supplied pads and spare nuts round out the package. The product is for stabilization only, so it is not a substitute for vehicle-lifting equipment.
- Four aluminum screw jacks included
- Each jack listed for up to 7,500 pounds
- Adjusts from 11 to 17 inches
- Includes pads and spare nuts
- The 11-to-17-inch adjustment range is narrower than 4-to-24-inch scissor-jack ranges.
Skip it if you need adjustment below 11 inches or above 17 inches; the OULEME 6500lbs-4 Pack spans 4 to 24 inches.
The SHALL set suits RV and trailer owners who want four aluminum screw jacks for stabilization within an 11-to-17-inch range. Check that range against your support points, and do not use the stands to lift a vehicle.
Full product details
| Brand | SHALL |
|---|---|
| Color | red |
| Compatible with Vehicle Type | RV, Trailer |
| Included Components | 4-Pack RV Stabilizer Jacks |
| Item Dimensions | 6.9 x 7 x 14.9 inches |
| Item Weight | 8.5 pounds |
| Load Capacity | 7500 Pounds |
| Manufacturer | SHALL |
| Part Number | SH212002AE |
| Manufacturer Warranty Description | 1-Year Warranty |
| Material | Aluminum |
| Model Number | SH212002AE |
| Style Name | Screw |

#10
10. Lippert Level Up Hydraulic Jack
- Dimensions: 21.25 x 9 x 9 in
- Load Capacity: 8000 lb
- Material: Aluminum
- Compatible with Vehicle Type: Trailer
Best for: Level Up hydraulic replacements.
Why it ranks #10: This aluminum jack is a replacement component for a Level Up automatic system, not a standalone powered stabilizer kit; it lists 8,000 pounds lift capacity.
Compatibility with Lippert Level Up automatic leveling systems makes this aluminum hydraulic jack a targeted replacement for owners of a 5th wheel RV or travel trailer. It has an 8,000-pound lift capacity and a 9-inch footpad, with a universal-fit description for the stated replacement role.
The Level Up replacement purpose matters most here: this jack is described for replacing a broken or old jack in a 5th wheel RV or travel trailer’s automatic leveling system. Aluminum construction keeps the listed assembly weight to 16 pounds, while the 8,000-pound lift capacity and 9-inch footpad give buyers concrete support specifications to check. Its hydraulic operation distinguishes it from manual scissor jacks, and the package includes the jack assembly.
- For Lippert Level Up automatic leveling systems
- 8,000-pound lift capacity
- Aluminum construction
- 9-inch footpad
- The package includes a jack assembly, not a multi-jack set.
Skip it if you need a complete manual four-jack kit; the OULEME 6500lbs-4 Pack includes four scissor jacks and installation hardware.
This Lippert jack is for owners replacing a component in a Level Up automatic leveling system on a 5th wheel or travel trailer. Confirm that replacement role suits your system; it is a single assembly.
Full product details
| Brand | Lippert Components |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Trailer |
| Included Components | Jack Assembly |
| Item Dimensions | 21.25 x 9 x 9 inches |
| Item Weight | 16 pounds |
| Load Capacity | 8000 pound |
| Manufacturer | Lippert |
| Part Number | 433458 |
| Manufacturer Warranty Description | 1 Year |
| Material | Aluminum |
| Model Number | 433458 |
| Style Name | Floor Jack |
Listed on Amazon as: Lippert Level Up Aluminum RV Hydraulic Leveling Jack with 8,000-lb. Lift Capacity, Universal Fit, 9" Footpad, Easy Installation – 433458
View on AmazonStabilizing is not the same as leveling or lifting
A stabilizer jack is intended to reduce movement after an RV is positioned; its listed capacity does not establish that it can lift the vehicle or level it safely. The ROCKMAN listing explicitly warns against using its stabilizers for lifting, tire changes, or supporting vehicle weight, and SHALL likewise says its screw jacks are for stabilization only. That distinction matters when comparing the large capacity figures in this roundup: the LIBRA set lists 9,000 pounds, while the SHALL states 7,500 pounds per jack, but those figures do not make either product a substitute for a designated lifting system.
The Lippert Level Up jack is a different case: the listing describes it as a replacement for an existing automatic leveling system, not a complete system. Match the task to the product’s stated role, and consult your RV documentation before treating any jack as a lifting or leveling device.
Check fit and set contents before ordering
A listed maximum height alone cannot confirm that a jack will fit your RV or reach the support point. For example, several scissor-jack products specify a 24-inch maximum height and 4-inch retracted height, while the SHALL screw jacks adjust from 11 to 17 inches. Compare those ranges with your RV’s available clearance and frame mounting locations, and verify mounting hardware and vehicle compatibility with the manufacturer.
Pack contents also vary: the LIBRA four-pack includes a drill socket, the Kohree four-pack lists a crank handle and drill bit, and the two-jack Kohree set includes a crank handle and drill socket. Powered products require a different fit check: the SEAFLO lists switches and waterproof reset breakers, while the Lippert PSX1 listing specifies no switch.
Do not assume an included control or installation hardware that the listing does not name; confirm what your particular setup requires before purchase.
How to Choose RV Power Leveling Jacks
Power operation and setup
Choose the operating method that fits how you want to deploy the supports. The Lippert PSX1 uses a switch-operated power stabilizer design, while the SEAFLO is a 12-volt electric dual-motor jack with switches and reset breakers. Orvex also describes an electric replacement jack stand with a switch and 30-inch lift height.
Manual scissor options can still speed setup with a drill: LIBRA includes a 3/4-inch magnetic socket, and Kohree and OULEME list drill sockets or bits alongside crank handles. A powered choice suits buyers seeking less manual cranking, provided it matches their RV installation; drill-ready scissor jacks suit owners who accept placing and operating separate supports.
Capacity and intended task
Compare capacity figures only after confirming whether the product is meant to stabilize, lift, or replace part of a leveling system. Listed capacities range from the Orvex’s 2,000 pounds to the LIBRA set’s 9,000 pounds; SEAFLO states 4,000 pounds static load capacity, and several scissor products list 6,500 to 7,500 pounds. These figures are not directly interchangeable: the SHALL figure is per jack, while other listings do not always clarify whether capacity applies per unit or to a set.
For ordinary stabilization, prioritize the product’s stated purpose and your RV manufacturer’s requirements. Buyers replacing a component in an existing automatic system should consider the Lippert Level Up replacement rather than assuming a standalone stabilizer is equivalent.
Height range and kit format
Look for an adjustment range that fits the space and support points on your RV, then check how many jacks and what hardware the kit supplies. Scissor models from Kohree list 4 inches retracted and 24 inches maximum height; OULEME also specifies a 4-to-24-inch range. SHALL’s aluminum screw jacks adjust from 11 to 17 inches, while the Orvex electric stand lists a 30-inch lift height.
Four-jack kits include LIBRA, Kohree 6500, ROCKMAN, OULEME, and SHALL; the Kohree 7500 listing is a two-jack set. A wider-height-range scissor kit may suit buyers needing adjustable corner supports, while a pair may suit a setup that only requires two replacement supports.
Verify mounting location and clearance rather than relying on range alone.
Which RV power leveling jack should you choose?
Choose the Lippert PSX1 Stabilizer if switch-operated stabilization and independently adjusting legs are your priority. For another electric option with a stated 4,000-pound static capacity and included switches, choose the SEAFLO Electric Stabilizer. If you need four drill-ready steel supports, the LIBRA Scissor Jacks list the highest capacity in this roundup at 9,000 pounds; for a soft-ground base, consider the ROCKMAN Scissor Jacks.
Choose the Kohree 6500 Scissor Jacks or OULEME Scissor Jacks for four-piece kits with 24-inch maximum height, or the Kohree 7500 Scissor Jacks if a two-jack set fits your needs. The SHALL Screw Jacks offer aluminum construction and 11-to-17-inch adjustment.
For a component in an existing automatic leveling system, consider the Lippert Level Up Hydraulic Jack, not as a complete system.
Related Buying Guides
- Best Jack For RV Trailer
- Best Jack Stands For RV
- Best Leveling Jacks For Motorhome
- Best RV Jack For Tire Change
- Best Power Tongue Jack
Frequently Asked Questions
Can RV stabilizer jacks level a trailer on an uneven campsite?
They can help steady a trailer on uneven ground, but stabilizer jacks are not necessarily a complete leveling system. The Lippert PSX1 has independently operating legs designed to adjust to uneven terrain. Check your RV’s setup and use dedicated leveling equipment when you need to level the vehicle rather than stabilize it.
How do I determine whether a jack set fits my RV frame and mounting points?
Compare the jack’s mounting arrangement and dimensions with your RV’s frame and existing mounting points before buying. Check the product instructions for compatibility details, and confirm that the intended installation location is structurally suitable. If the fit is unclear, consult the RV manufacturer or a qualified installer rather than assuming universal compatibility.
Can I use stabilizer jacks to lift an RV or change a tire?
Do not use stabilizer jacks to lift an RV for a tire change unless the jack is specifically designed and approved for that lifting task. Stabilizers are intended to steady a parked vehicle, not support it during wheel removal. Follow the RV and jack manufacturers’ instructions and use equipment rated for lifting.
What should I consider when choosing powered versus manual stabilizer jacks?
Choose powered stabilizers if switch-operated support is a priority; the Lippert PSX1 and SEAFLO are electric options, while the SEAFLO is a 12-volt model with a dual-motor design. Manual scissor or screw jacks may better suit a setup where drill-ready or hand-adjusted supports meet your needs.
Can a replacement hydraulic jack work as a complete automatic leveling system?
No. The Lippert Level Up hydraulic jack is a component for an existing automatic leveling system, not a complete system by itself. Before choosing it, confirm that it is compatible with your system and installation.
If you need a full automatic leveling setup, verify that every required component is included.
Final Words
For switch-operated stabilization with legs designed to adjust independently, the Lippert PSX1 is the roundup’s best overall match, but it is not a complete leveling system. Consider the SEAFLO for a 12-volt electric alternative, or select a scissor or screw jack set based on the number of supports, construction, and adjustment range you need. Confirm fit, intended use, and system compatibility before installation.


