A strong motorhome jack choice should match your RV’s support needs, installation setup, and intended use; the LIBRA 9K HD Scissor Jacks are a good fit for buyers seeking a four-jack steel set with a listed 9,000-pound capacity. This roundup compares ten options, from manual scissor jacks with drill sockets to screw stands and an electric replacement jack. Capacity figures, height ranges, included components, and vehicle compatibility differ, so the products are not interchangeable.
In particular, stabilizer jacks are intended to reduce movement when parked, not to lift a motorhome for tire changes. Check the product’s stated purpose and your vehicle’s requirements before choosing.
The picks below prioritize stated RV or motorhome fit, useful listed specifications, and components that can simplify setup.
The LIBRA 9K HD Scissor Jacks lead this list for buyers who want a four-jack set with a listed 9,000-pound capacity. The steel jacks have a 24-inch maximum height, and the kit includes a 3/4-inch magnetic socket for power-drill operation. They are listed as compatible with campers, RVs, and trailers.
Treat them as stabilizers, not as a substitute for equipment specifically rated to lift a motorhome for servicing.
Our Top Picks
Best OverallThis four-jack alloy-steel set lists a 9,000-pound capacity, 24-inch size, and camper, RV, and trailer compatibility; its kit includes a drill socket.
View on Amazon
Motorhome FitThe four-pack explicitly lists motorhome compatibility and 7,500-pound capacity per product description, with a 4-to-24-inch retracted-to-extended range.
View on Amazon
Best Height RangeThis four-pack is listed for campers, RVs, and trailers, with 6,500-pound capacity and a stated adjustment range from 4 to 24 inches.
View on Amazon- Soft-Ground Base ROCKMAN 7500 Scissor Jacks
- Aluminum Screw Stands SHALL Aluminum Screw Jacks
Compare the motorhome leveling jack options
| # | Product | Load Capacity | Material | Compatible with Vehicle Type | Dimensions | Buy |
|---|---|---|---|---|---|---|
| 1 | 1. LIBRA 9K HD Scissor JacksBest Overall | 9000 lb | Alloy Steel | Camper, RV, Trailer | 26.5 x 2.25 x 24 in | View on Amazon |
| 2 | 2. GarveeTech 7500 Scissor JacksMotorhome Fit | 7500 LBS | — | RV, Trailer, Motorhome | 28.15 x 9.17 x 8.07 in | View on Amazon |
| 3 | 3. Kohree 6500 Scissor JacksBest Height Range | 6500 lb | Alloy Steel | Camper, RV, Trailer | 26.77 x 826 x 15.74 in | View on Amazon |
| 4 | 4. ROCKMAN 7500 Scissor JacksSoft-Ground Base | 7500 lb | Alloy Steel | Trailer | 26.5 x 2.25 x 24 in | View on Amazon |
| 5 | 5. OULEME 6500 Scissor JacksHeight-Range RV Four-Pack | 6500 LBS | Alloy Steel | RV | 27.1 x 19.09 x 5 in | View on Amazon |
| 6 | 6. YOMILINK 7500 Scissor JacksIncluded Stabilizing-Pad Kit | 7500 lb | Alloy Steel | Trailer | 26 x 7.16 x 6 in | View on Amazon |
| 7 | 7. SHALL Aluminum Screw JacksAluminum Screw Stands | 7500 lb | Aluminum | RV, Trailer | 6.9 x 7 x 14.9 in | View on Amazon |
| 8 | 8. LIBRA 6K Scissor JacksTwo-Jack Drill-Assisted Setup | 6000 lb | Alloy Steel | Trailer | 26.5 x 2.25 x 24 in | View on Amazon |
| 9 | 9. Orvex Electric Jack StandElectric Switch-Operated Stabilizing | 2000 lbs | — | RV | — | View on Amazon |
| 10 | 10. Lippert Level Up Hydraulic JackLevel Up System Replacement | 8000 lb | Aluminum | Trailer | 21.25 x 9 x 9 in | View on Amazon |
Detailed Reviews: Best Leveling Jacks For Motorhome

#1 · Best Overall
1. LIBRA 9K HD Scissor Jacks
- Load Capacity: 9000 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Camper, RV, Trailer
- Dimensions: 26.5 x 2.25 x 24 in
Best for: Heavy Trailer Four-Jack Setup.
Why it ranks #1: This four-jack alloy-steel set lists a 9,000-pound capacity, 24-inch size, and camper, RV, and trailer compatibility; its kit includes a drill socket.
A 9,000-pound capacity per listed set and thick 11-gauge steel make the LIBRA four-pack a substantial option for RV and trailer stabilization. Four scissor jacks cover a multi-point setup, while the included 3/4-inch magnetic socket lets a power drill speed raising and lowering at camp.
The alloy-steel jacks extend to 24 inches, giving a broad working range for camper, RV, and trailer leveling. Their electrophoresis coating supports durability, while the included drill socket can reduce repeated hand cranking during setup. The four-jack package suits buyers outfitting several support points at once; at 58 pounds, the set is a substantial item to move and store. These are stabilizers, so use them for leveling and stabilization rather than vehicle lifting.
- Four steel scissor jacks in one set
- 9,000-pound listed load capacity
- 11-gauge steel with electrophoresis coating
- 3/4-inch magnetic socket for power-drill operation
- The four-jack set weighs 58 pounds, making it a heavy package to handle.
Skip it if you need a lightweight set to carry, since this four-jack package weighs 58 pounds.
For RV and trailer owners who want four steel supports and drill-assisted setup, this LIBRA set offers a 24-inch extension range. Account for its 58-pound package weight and use it only for stabilization, not lifting.
Full product details
| Brand | LIBRA |
|---|---|
| Color | black |
| Compatible with Vehicle Type | Camper, RV, Trailer |
| Item Dimensions | 26.5 x 2.25 x 24 inches |
| Item Weight | 58 pounds |
| Load Capacity | 9000 pounds |
| Manufacturer | Libra |
| Part Number | 26098 |
| Manufacturer Warranty Description | one year limited warranty |
| Material | Alloy Steel |
| Model Number | 26093 |
| Style Name | Scissor Jack |
Listed on Amazon as: LIBRA 9K lb HD 24" RV Trailer Camper Stabilizer Leveling Scissor Jacks,Set4
View on Amazon
#2 · Motorhome Fit
2. GarveeTech 7500 Scissor Jacks
- Load Capacity: 7500 LBS
- Compatible with Vehicle Type: RV, Trailer, Motorhome
- Dimensions: 28.15 x 9.17 x 8.07 in
Best for: Motorhome-Compatible Steel Set.
Why it ranks #2: The four-pack explicitly lists motorhome compatibility and 7,500-pound capacity per product description, with a 4-to-24-inch retracted-to-extended range.
GarveeTech explicitly lists motorhomes alongside RVs and trailers as compatible vehicles, making this four-jack set a direct option for motorhome stabilization. Its scissor design retracts to 4 inches and extends to 24 inches, covering a useful height range for setup.
Each jack is listed with a 7,500-pound capacity, and heavy-grade steel with powder coating is specified to resist rust and wear. The 4-to-24-inch range can accommodate different leveling heights while keeping the retracted profile relatively short. Four jacks are included, so buyers receive a multi-point set rather than a single replacement part. At 53.8 pounds, the package is substantial to move, a practical consideration for handling and storage.
- Compatible with RVs, trailers, and motorhomes
- Four scissor jacks included
- 7,500-pound listed capacity
- Retracts to 4 inches and extends to 24 inches
- The 53.8-pound package is heavy to handle and store.
Skip it if you need a lightweight package to move; the four-jack set weighs 53.8 pounds.
GarveeTech is a fit for motorhome owners seeking four steel scissor jacks with a 4-to-24-inch range. Its listed vehicle compatibility is broad, but the 53.8-pound package weight deserves consideration during handling.
Full product details
| Brand | GarveeTech |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | RV, Trailer, Motorhome |
| Included Components | 4PCS RV Stabilizer Jacks |
| Item Dimensions | 28.15 x 9.17 x 8.07 inches |
| Item Weight | 53.8 pounds |
| Load Capacity | 7500 LBS |
| Manufacturer | GarveeTech |
| Part Number | VAM_33N3NCYB-GT-QGl3Z4V |
| Manufacturer Warranty Description | 30 days manufacturer |
| Model Number | VAM_33N3NCYB-GT-QGl3Z4V |
| Style Name | scissor |
Listed on Amazon as: GarveeTech 7500 LBS 24" Camper Trailer Stabilizer Leveling Scissor Jacks
View on Amazon
#3 · Best Height Range
3. Kohree 6500 Scissor Jacks
- Load Capacity: 6500 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Camper, RV, Trailer
- Dimensions: 26.77 x 826 x 15.74 in
Best for: Manual-or-Drill RV Setup.
Why it ranks #3: This four-pack is listed for campers, RVs, and trailers, with 6,500-pound capacity and a stated adjustment range from 4 to 24 inches.
Kohree’s 24-inch maximum height pairs with two operating methods: a supplied crank handle or a power drill, which is not included. That flexibility lets RV and trailer owners choose hand operation or use their own drill to raise and lower this four-jack set.
Heavy-duty alloy steel with an electrophoresis surface finish supports stabilization and leveling across compatible campers, RVs, and trailers. The 4-inch retracted height and 24-inch maximum extension define the working range, while the 26-inch retracted length is important when planning storage. The package includes four jacks, a crank handle, and a drill bit, so manual operation is ready to go; powered operation requires a separately supplied drill.
- Four-pack of alloy-steel scissor jacks
- 6,500-pound listed load capacity
- Extends to 24 inches and retracts to 4 inches
- Includes crank handle and drill bit
- A power drill is not included for drill-assisted operation.
Skip it if you expect a supplied drill for powered adjustment; the included drill bit does not replace one.
This Kohree set fits RV owners who value a choice between hand cranking and using their own drill. Its 4-to-24-inch range supports varied setups, but powered adjustment depends on having a drill available.
Full product details
| Brand | Kohree |
|---|---|
| Color | Black-4Pack |
| Compatible with Vehicle Type | Camper, RV, Trailer |
| Included Components | 1 crank handle, 1 drill bit, 4 Pack RV Jack |
| Item Dimensions | 26.77 x 826 x 15.74 inches |
| Item Weight | 48.7 pounds |
| Load Capacity | 6500 Pounds |
| Manufacturer | Kohree |
| Part Number | KR1225-KO-CA-FBA |
| Manufacturer Warranty Description | Kohree Service |
| Material | Alloy Steel |
| Model Number | KR1225 |
| Style Name | Scissor Jack |
Listed on Amazon as: Kohree 6500 lbs RV Stabilizer Jacks 4 Pack, 24" Leveling Scissor Jack
View on Amazon
#4 · Soft-Ground Base
4. ROCKMAN 7500 Scissor Jacks
- Load Capacity: 7500 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Trailer
- Dimensions: 26.5 x 2.25 x 24 in
Best for: Soft-Ground Scissor-Jack Set.
Why it ranks #4: The four-pack lists 7,500-pound capacity and a wide bow-tie base intended for soft or uneven ground; the manufacturer warns it is for stabilization only.
A wide bow-tie base is the ROCKMAN set’s defining feature, offering a broader contact area for stabilizing trailers on soft or uneven ground. Four steel scissor jacks provide a multi-point setup, with a listed 7,500-pound capacity and 24-inch height.
Reinforced heavy-duty steel and an electrophoresis coating support durability and rust resistance for outdoor use. The bow-tie bases are specifically described as helping steady the trailer on soft or uneven terrain, making surface conditions a central reason to consider this set. At 40 pounds, the package is lighter than some four-jack options in the supplied lineup. These jacks are strictly for stabilization and leveling, not lifting, tire changes, or supporting a vehicle.
- Four scissor jacks in the set
- 7,500-pound listed load capacity
- Wide bow-tie base for soft or uneven ground
- Reinforced steel with electrophoresis coating
- The manufacturer warns not to use these jacks for lifting or tire changes.
Skip it if you need a jack for lifting a vehicle or changing tires; these are limited to stabilization and leveling.
This ROCKMAN set suits trailer owners who prioritize broad base contact on soft or uneven campsites. Its 24-inch scissor-jack format supports leveling, but it is not a substitute for lifting equipment or tire-change support.
Full product details
| Brand | ROCKMAN |
|---|---|
| Color | black |
| Compatible with Vehicle Type | Trailer |
| Item Dimensions | 26.5 x 2.25 x 24 inches |
| Item Weight | 40 pounds |
| Load Capacity | 7500 pound |
| Manufacturer | Rockman |
| Part Number | 26090 |
| Material | Alloy Steel |
| Model Number | 26090 |
| Style Name | Scissor Jack |
Listed on Amazon as: 24" 7500lbs RV Camper Trailer Stabilizer Leveling Scissor Jacks PK4
View on Amazon
#5
5. OULEME 6500 Scissor Jacks
- Load Capacity: 6500 LBS
- Material: Alloy Steel
- Compatible with Vehicle Type: RV
- Dimensions: 27.1 x 19.09 x 5 in
Best for: Height-Range RV Four-Pack.
Why it ranks #5: This RV scissor-jack set lists 6,500-pound capacity and a 4-to-24-inch adjustment range, and includes a crank handle, drill socket, and mounting screws.
Adjustment from 4 to 24 inches gives the OULEME scissor-jack set a useful span for trailer frames at different heights. Its four-jack package also includes a manual crank, a 3/4-inch drill socket, and 16 mounting screws, enabling buyers to choose hand or power-assisted operation.
The extra-wide base plate is specified to improve stability under load, while the 6,500-pound capacity provides a stated limit for the set’s leveling work. A 4-inch retracted height and 24-inch maximum height accommodate a broad adjustment range. The included crank offers manual tuning; the drill socket supports faster power operation. Sixteen mounting screws and instructions complete the kit, so installation hardware is included rather than needing a separate initial purchase.
- 6,500-pound listed lifting capacity
- Adjustment from 4 to 24 inches
- Extra-wide base plate
- Includes crank, 3/4-inch drill socket, and 16 mounting screws
- The listed retracted length is 26 inches, which may constrain storage space.
Skip it if you need a compact stored profile; the listed retracted length is 26 inches.
Choose this OULEME kit if you want a four-jack setup with both manual and drill-assisted operation and a 4-to-24-inch height range. Check available storage for its 26-inch retracted length before settling on it.
Full product details
| Brand | OULEME |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | RV |
| Included Components | Complete Kit: Includes 1 manual crank handle, 1 drill socket (3/4"), 16 mounting screws (3/8"), and a detailed instruction manual — ready to use out of the box. |
| Item Dimensions | 27.1 x 19.09 x 5 inches |
| Load Capacity | 6500 LBS |
| Manufacturer | OULEME |
| Part Number | TD-RSJ120L-4 |
| Manufacturer Warranty Description | 2 Year Manufacturer |
| Material | Alloy Steel |
| Model Number | 6500lbs-4 Pack |
| Style Name | scissor |
Listed on Amazon as: 6500 lbs RV Camper Scissor Jack, 24" Trailer Leveling Stabilizer 4PK
View on Amazon
#6
6. YOMILINK 7500 Scissor Jacks
- Load Capacity: 7500 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Trailer
- Dimensions: 26 x 7.16 x 6 in
Best for: Included Stabilizing-Pad Kit.
Why it ranks #6: The steel jacks list 7,500-pound capacity and extend from 5.27 to 24.4 inches; the included stabilizing pads add surface contact.
Included stabilizing pads give the YOMILINK scissor-jack set an added contact surface for RV leveling. The steel jacks extend from 5.27 to 24.4 inches and offer both crank and drill operation, letting owners adjust height manually or use a power drill.
Electrophoretic-coated alloy steel provides the listed construction, while the 7,500-pound capacity defines its stated support rating. The extension range reaches 24.4 inches and retracts to a listed 26-inch length, providing a broad working span but requiring room for storage. The included pad kit adds surface contact, and dual operation gives flexibility during setup. The listing identifies compatibility with trailers, so buyers should keep that vehicle context in mind when selecting a set.
- Includes stabilizing pads
- 7,500-pound listed load capacity
- Extends from 5.27 to 24.4 inches
- Supports crank and drill operation
- The listed 26-inch retracted length may be awkward in limited storage.
Skip it if you have little storage room for jacks measuring 26 inches in retracted length.
YOMILINK suits trailer owners who want pads included with a wide-range scissor jack and a choice of crank or drill operation. Plan for its 26-inch retracted length when arranging onboard storage.
Full product details
| Brand | YOMILINK |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Trailer |
| Included Components | Comes with housing |
| Item Dimensions | 26 x 7.16 x 6 inches |
| Item Weight | 30 pounds |
| Load Capacity | 7500 Pounds |
| Manufacturer | YOMILINK |
| Part Number | YM-JSQJD-7500 |
| Manufacturer Warranty Description | 1 Year Manufacturer |
| Material | Alloy Steel |
| Model Number | YM-JSQJD-7500 |
Listed on Amazon as: 7500lbs RV Scissor Jacks with Pads, Stabilizer Leveling Jacks
View on Amazon
#7 · Aluminum Screw Stands
7. SHALL Aluminum Screw Jacks
- Load Capacity: 7500 lb
- Material: Aluminum
- Compatible with Vehicle Type: RV, Trailer
- Dimensions: 6.9 x 7 x 14.9 in
Best for: Aluminum Screw-Jack Support.
Why it ranks #7: Each aluminum stand lists up to 7,500 pounds of support and adjusts from 11 to 17 inches, but the listing says these are for stabilization only.
Each SHALL aluminum screw jack supports up to 7,500 pounds and adjusts from 11 to 17 inches, enabling fine height adjustment within a defined range. The four-pack offers a lighter-material alternative to steel scissor jacks for RV and trailer stabilization.
Die-cast aluminum construction is described as rust-proof and scratch-resistant, a useful attribute for equipment exposed to varied outdoor conditions. The adjustable screw mechanism allows precise leveling between 11 and 17 inches, but that range is narrower than a jack extending to 24 inches. Spare nuts and pads are included, and the product is explicitly for stabilization only—not lifting. The 8.5-pound listed item weight may also simplify handling compared with heavier multi-jack packages.
- Four aluminum stabilizer jacks
- Each jack supports up to 7,500 pounds
- Adjusts from 11 to 17 inches
- Includes spare nuts and pads
- The 11-to-17-inch adjustment range cannot reach heights outside that span.
Skip it if you need support below 11 inches or above 17 inches; these screw jacks stay within that adjustment range.
Pick SHALL for RV or trailer owners who want aluminum screw supports and controlled adjustment within 11 to 17 inches. Its fixed range and stabilization-only use make height needs and intended support role key considerations.
Full product details
| Brand | SHALL |
|---|---|
| Color | red |
| Compatible with Vehicle Type | RV, Trailer |
| Included Components | 4-Pack RV Stabilizer Jacks |
| Item Dimensions | 6.9 x 7 x 14.9 inches |
| Item Weight | 8.5 pounds |
| Load Capacity | 7500 Pounds |
| Manufacturer | SHALL |
| Part Number | SH212002AE |
| Manufacturer Warranty Description | 1-Year Warranty |
| Material | Aluminum |
| Model Number | SH212002AE |
| Style Name | Screw |

#8
8. LIBRA 6K Scissor Jacks
- Load Capacity: 6000 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Trailer
- Dimensions: 26.5 x 2.25 x 24 in
Best for: Two-Jack Drill-Assisted Setup.
Why it ranks #8: This two-jack alloy-steel set lists 6,000-pound capacity and includes a magnetic drill socket; it is listed as compatible with trailers.
The LIBRA two-pack includes a 3/4-inch magnetic socket for power-drill operation, enabling faster raising and lowering without relying solely on a hand crank. Its wide bow-tie bases are specified to steady trailers and campers on soft or uneven surfaces.
Heavy-duty alloy steel with an electrophoresis surface finish supports durability, and each jack is listed at a 6,000-pound capacity. The 24-inch scissor-jack format serves trailer stabilization and leveling, while the two-jack package suits buyers adding or replacing a pair rather than outfitting four corners. The drill socket supports a quicker setup workflow, and the broad bases address uneven ground. Keep the product’s trailer compatibility and two-piece quantity in mind when planning a complete installation.
- Two steel scissor jacks included
- 6,000-pound listed load capacity
- 3/4-inch magnetic socket for drill operation
- Wide bow-tie bases for soft or uneven surfaces
- The two-jack package may not provide enough units for a four-corner setup.
Skip it if you need four jacks in one package; this LIBRA listing includes two.
Choose this LIBRA pair when adding or replacing two trailer stabilizers and drill-assisted adjustment is useful. The bow-tie bases suit soft or uneven ground, but a four-corner setup requires additional jacks.
Full product details
| Brand | LIBRA |
|---|---|
| Color | black |
| Compatible with Vehicle Type | Trailer |
| Item Dimensions | 26.5 x 2.25 x 24 inches |
| Item Weight | 20 pounds |
| Load Capacity | 6000 pounds |
| Manufacturer | LIBRA |
| Part Number | 26082 |
| Manufacturer Warranty Description | One year limited warranty |
| Material | Alloy Steel |
| Model Number | 26082 |
| Style Name | Scissor Jack |
Listed on Amazon as: LIBRA 24" 6K lbs RV Trailer Camper Stabilizer Leveling Scissor Jacks set2
View on Amazon
#9
9. Orvex Electric Jack Stand
- Load Capacity: 2000 lbs
- Compatible with Vehicle Type: RV
Best for: Electric Switch-Operated Stabilizing.
Why it ranks #9: This RV electric jack stand replaces manual cranking and lists a 30-inch lift height, but its stated 2,000-pound capacity is below the scissor-jack options.
A switch replaces manual cranking on this Orvex electric jack stand, enabling powered operation with a press of the control. Its stated maximum lift height is 30 inches, and each leg operates independently to adapt automatically to uneven terrain.
The heavy-duty steel construction and black powder-coated exterior provide the listed material and finish, while the 2,000-pound capacity sets its stated limit. Independent operation is intended to help the legs accommodate uneven ground without synchronized manual cranking. The listing identifies it as a replacement fitting 298707, so compatibility with that jack stand is central to choosing it. The package lists one jack stand, not a four-jack kit, making quantity an important setup consideration.
- Electric switch operation replaces manual cranking
- Maximum lift height of 30 inches
- Each leg operates independently
- Heavy-duty steel with powder-coated exterior
- The 2,000-pound capacity is lower than the listed capacities of the other multi-jack sets.
Skip it if you need a multi-jack kit or a higher stated capacity; this listing is for one 2,000-pound jack stand.
This Orvex unit fits buyers replacing a compatible 298707 electric stabilizer jack who want switch operation and independent leg movement. Verify that the single stand and 2,000-pound capacity suit the intended system.
Full product details
| Brand | Orvex |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | RV |
| Included Components | 298707 Jack Stand |
| Load Capacity | 2000 lbs |
| Manufacturer | ZORVEX |
| Part Number | 298707 |
| Manufacturer Warranty Description | 1 years |
| Model Number | 298707 |
Listed on Amazon as: Power Stabilizer Jack Stand Kit Fits for 298707, Electric RV Trailer Jack with Black Exterior Switch, 2000 lbs Capacity 30′′ Lift Height for Camper Leveling
View on Amazon
#10
10. Lippert Level Up Hydraulic Jack
- Load Capacity: 8000 lb
- Material: Aluminum
- Compatible with Vehicle Type: Trailer
- Dimensions: 21.25 x 9 x 9 in
Best for: Level Up System Replacement.
Why it ranks #10: This is an 8,000-pound aluminum replacement jack for a Level Up automatic system on a fifth wheel or travel trailer, not a general motorhome jack set.
The Lippert hydraulic jack is identified as a replacement for broken or old Level Up jacks on a fifth-wheel RV or travel trailer automatic leveling system. Its 8,000-pound lift capacity and aluminum construction make it a system component rather than a conventional manual scissor-jack kit.
A 9-inch footpad provides the listed ground-contact surface, and the assembly weighs 16 pounds. The product is described as universal fit, but its replacement role is specifically tied to Level Up automatic leveling systems, so the system context matters more than choosing a standalone stabilizer. Installation is described as easy, and the package includes one jack assembly. Buyers replacing a single component should consider that no multi-jack set is listed here.
- 8,000-pound lift capacity
- Aluminum hydraulic jack assembly
- 9-inch footpad
- Identified as a replacement for Level Up automatic systems
- The package includes one jack assembly, not a multi-jack set.
Skip it if you need a complete manual stabilizer set; this is a single hydraulic replacement assembly for a Level Up system.
Consider this Lippert assembly when replacing a jack in a compatible Level Up automatic leveling system on a fifth wheel or travel trailer. It is a single hydraulic component, not a general four-corner stabilization kit.
Full product details
| Brand | Lippert Components |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Trailer |
| Included Components | Jack Assembly |
| Item Dimensions | 21.25 x 9 x 9 inches |
| Item Weight | 16 pounds |
| Load Capacity | 8000 pound |
| Manufacturer | Lippert |
| Part Number | 433458 |
| Manufacturer Warranty Description | 1 Year |
| Material | Aluminum |
| Model Number | 433458 |
| Style Name | Floor Jack |
Listed on Amazon as: Lippert Level Up Aluminum RV Hydraulic Leveling Jack with 8,000-lb. Lift Capacity, Universal Fit, 9" Footpad, Easy Installation – 433458
View on AmazonStabilizing is not the same as lifting
Do not use a stabilizer jack to lift a motorhome for a tire change or to support it during repairs. The product listings distinguish stabilization from lifting: ROCKMAN explicitly warns that its jacks are for stabilizing and leveling only and must not be used for lifting, tire changes, or supporting vehicle weight. SHALL likewise labels its screw jacks for stabilization only.
A high listed capacity does not override those use limits. The LIBRA, Kohree, and other scissor-jack listings describe stabilization or leveling, not safe service lifting.
For maintenance, follow the motorhome manufacturer’s jacking instructions and use equipment intended and rated for that task. When parked, position stabilizers according to their installation instructions and the vehicle’s requirements. This distinction matters more than comparing capacity figures alone, because the stated number does not establish that a jack is suitable for every kind of load or use.
Check mounting fit before choosing a jack
A listed maximum height does not confirm that a jack will attach to your motorhome or reach the correct support point. The LIBRA 9K HD Scissor Jacks listing includes installation hardware, while the OULEME 6500 Scissor Jacks listing specifies 16 mounting screws; other products describe stands or replacement assemblies rather than a complete installation matched to a specific vehicle. The Lippert Level Up Hydraulic Jack is specifically described as a replacement for a Level Up automatic leveling system on a fifth wheel or travel trailer, so its 8,000-pound capacity alone is not evidence of general fit.
Before buying, compare your existing mounting arrangement and required clearance with the product’s dimensions and instructions. Also confirm what hardware is supplied and whether the product is meant to replace a component in an existing system or install as a standalone stabilizer.
How to Choose Motorhome Leveling Jacks
Capacity and intended use
Look for a listed capacity that suits your application, but do not treat a capacity figure as permission to lift a motorhome. The options span from the Orvex Electric Jack Stand’s stated 2,000 pounds to the LIBRA 9K HD Scissor Jacks’ 9,000 pounds; several four-jack sets list 6,500 or 7,500 pounds. These figures are not necessarily described on the same basis, so check each product’s wording and your vehicle’s instructions rather than assuming the numbers are directly comparable.
Buyers seeking a higher stated capacity among these stabilizer sets can consider the LIBRA 9K HD Scissor Jacks. Buyers considering the Orvex should weigh its electric operation against its lower listed capacity.
Use separate, appropriately rated equipment for service lifting.
Height range and clearance
Choose a jack whose stated height range matches the gap and support points on your parked motorhome. Several scissor-jack listings reach 24 inches: Kohree specifies 4 to 24 inches, while YOMILINK lists 5.27 to 24.4 inches. The SHALL Aluminum Screw Jacks adjust from 11 to 17 inches, and the Orvex Electric Jack Stand lists a maximum lift height of 30 inches.
A larger maximum does not guarantee a fit at the retracted height, so check both ends of the range and the listed dimensions against your setup. Buyers who need more adjustment range among the manual scissor options may prefer Kohree or YOMILINK; buyers whose required height falls within 11 to 17 inches may find the SHALL screw stands relevant.
Operation and supplied hardware
Check whether you want manual cranking, drill-assisted operation, or an electric replacement, and verify which components are included. The LIBRA 9K HD Scissor Jacks include a 3/4-inch magnetic socket for a power drill; Kohree includes a crank handle and drill bit, with the drill itself not included. OULEME lists a crank handle, drill socket, and 16 mounting screws, while the Orvex uses an electric switch instead of manual cranking.
Buyers who want a manual backup and drill option can compare the LIBRA, Kohree, and OULEME kits. Those prioritizing powered operation may consider Orvex, but should also account for its stated 2,000-pound capacity and confirm that it suits their vehicle and replacement requirements.
Which leveling jacks fit my motorhome?
For a four-jack steel set with the highest listed capacity in this selection, choose the LIBRA 9K HD Scissor Jacks; its listing also names RV compatibility and includes a drill socket. If explicit motorhome compatibility is your priority, consider GarveeTech 7500 Scissor Jacks, whose listing names motorhomes and gives a 4-to-24-inch range. For a 6,500-pound set with a crank handle and drill bit included, Kohree 6500 Scissor Jacks are a practical alternative.
If you need electric operation, review the Orvex Electric Jack Stand carefully: it lists a 30-inch height but only 2,000-pound capacity. Choose the Lippert Level Up Hydraulic Jack only when replacing a compatible Level Up system.
Before purchase, confirm mounting fit and use stabilizers only for their stated purpose.
Related Buying Guides
Frequently Asked Questions
How many stabilizer jacks should I use on my motorhome?
Use the number and placement specified by your motorhome and the jack instructions. A four-jack set can support multiple points, but the right setup depends on the vehicle’s frame and design. Stabilizers help reduce movement; they are not a substitute for equipment rated to lift a motorhome for servicing.
Can I use stabilizer jacks to lift a motorhome for tire changes?
No. Stabilizer jacks are intended to steady a parked motorhome, not lift it for tire changes or other servicing. Use lifting equipment specifically rated and positioned for that job, and follow the vehicle and equipment instructions.
A stabilizer’s listed capacity does not by itself establish that it is suitable for lifting.
How do I check whether a jack will fit my motorhome’s frame and mounting points?
Compare the jack’s mounting arrangement and dimensions with your motorhome’s frame and existing mounting points, then confirm compatibility in the product and vehicle instructions. Check the listed height range and clearance as well. If fit is not explicit, verify it with the seller or manufacturer before purchasing or installing.
What should I check before choosing an electric stabilizer jack?
Check that the listing identifies the jack as compatible with your application, and review its capacity and lift height against your needs. For example, the Orvex electric stand lists a 30-inch height and 2,000-pound capacity. Electric operation does not make a stabilizer suitable for lifting a motorhome for servicing.
When should I choose a hydraulic leveling jack?
Choose a hydraulic jack as a replacement only when it is compatible with the leveling system already on your motorhome. The Lippert Level Up jack is specifically presented as part of a Level Up system, so confirm system compatibility and mounting fit rather than relying on a universal-fit description alone.
Final Words
For a four-jack steel set with the highest listed capacity in this selection, choose the LIBRA 9K HD Scissor Jacks; the listing gives a 24-inch maximum height and includes a drill socket. If explicit motorhome compatibility matters, consider GarveeTech; Kohree is another four-jack option with a crank handle and drill bit. Treat all stabilizers as stabilizers, verify mounting fit, and use properly rated lifting equipment for servicing.


