Best Off Road Jack Mounts for Trail and Rack Setups

#1 · Best Overall

1. Motobilt Off-road Jack Mount

• Material: Alloy Steel
• Weight: 7257 g
• Compatible with Vehicle Type: Off-road Vehicles

Best for: Badlands 3-Ton Jack Owners.

Why it ranks #1: Purpose-built for large 3-ton off-road jacks, it offers vertical or horizontal mounting and concealed handle storage; the listing specifies alloy steel.

Concealed handle storage keeps the jack handle tucked away with the mount, so it stays organized and ready alongside a compatible 3-ton off-road jack. Motobilt also permits vertical or horizontal installation, giving trail builders flexibility to position the jack around their vehicle setup.

The mount is tailored to large 3-ton off-road jacks, a specific match that helps keep the jack secure and accessible for trail use. Its hidden handle-storage feature keeps the handle out of the way until needed, while the choice of vertical or horizontal mounting helps adapt placement to available space. Alloy-steel construction provides the listed material, and this is the mount only; buyers need to supply a compatible jack separately.

Skip it if you need a mount for a 1.5-ton Badlands jack; Fenix Motorsports' Gen 2 holder is specified for that capacity.

This suits owners securing a large 3-ton off-road jack who value tucked-away handle storage and flexible orientation. Account for the mount-only listing and check that your jack matches its stated 3-ton off-road application.

Listed on Amazon as: Off-road Jack Mount compatible with Badlands 3 ton jack

#2 · Best Badlands Fit

2. Fenix Motorsports 3-Ton Mount

• Material: Alloy Steel
• Weight: 15 lb
• Compatible with Vehicle Type: ATV, Car, RV, Sport Utility Vehicle, Trailer…

Best for: 3-Ton Badlands Trail-Rig Mounting.

Why it ranks #2: Designed specifically for a 3-ton Badlands jack, this alloy-steel mount includes handle clips, a linch pin, and mounting hardware.

Included handle clips and a linch pin help secure a 3-ton Badlands jack for transport, while the alloy-steel mount is aimed at off-road setups. Its listed bolt-on installation works with roll cages, bed racks, or chassis mounts, giving builders several placement options.

This mount is specified for Harbor Freight's 3-ton Badlands jack, so its capacity and intended jack application are clear for owners outfitting an ATV, truck, trailer, or other listed vehicle. The included handle clips and linch pin help keep the jack components together, and mounting hardware is included for bolt-on installation. Alloy-steel construction and the raw-steel finish suit buyers planning a custom-finished setup; the listing identifies the mount as a 3-ton model.

Skip it if you own a 1.5-ton Badlands jack; Fenix Motorsports' Gen 2 holder is specified for the smaller 1.5-ton model.

This fits owners mounting a 3-ton Badlands jack to a roll cage, bed rack, or chassis. The included clips and hardware simplify the listed bolt-on setup, while raw steel leaves finishing to the buyer.

Listed on Amazon as: Offroad Jack Holder for Harbor Freight 3 Ton Badlands Jack

#3 · Best Aluminum Option

3. Powerbuilt Off-Road Jack Mount

• Material: Aluminum
• Weight: 15.6 lb
• Compatible with Vehicle Type: Car, Sport Utility Vehicle, Truck

Best for: Multi-Location 2- and 3-Ton Storage.

Why it ranks #3: Its solid-aluminum construction supports listed 2- and 3-ton jacks, with vertical or horizontal mounting and dedicated handle storage.

A dedicated handle channel and polyester pouch keep the handle stored with the jack, while vertical or horizontal mounting lets the bracket work across garages, toy haulers, and service trucks. Powerbuilt specifies compatibility with 2- and 3-ton jacks, giving buyers a broad capacity range for storage planning.

Solid aluminum construction provides a durable bracket without using steel for the mount, and the stated 3-ton load capacity covers the listed 2- and 3-ton jack applications. The handle channel and polyester pouch help keep the handle organized beside the jack, while vertical or horizontal mounting offers more placement options in a garage or vehicle. Molle panel side supports add another storage feature, though the listing does not specify which accessories they accommodate.

Skip it if you want a lighter two-piece roll-on cradle for a Badlands jack; Foruly's mounts use aluminum wheel cradles and your own strap.

This suits owners storing a 2- or 3-ton jack in a garage, toy hauler, or service truck who want handle organization and flexible orientation. Its 15.6-pound weight matters when planning installation.

Listed on Amazon as: Powerbuilt Off-Road Jack Mount – Professional-Grade Aluminum Storage Bracket with Adjustable Steel-Buckle Straps, Handle Storage, Vertical or Horizontal Mount for 2 & 3 Ton Jacks – 620632ECE

#4 · Best Wheel Cradles

4. Foruly Roll-On Jack Mounts

• Compatible with Vehicle Type: Trailer, Truck

Best for: Roll-On Badlands Jack Cradles.

Why it ranks #4: The aluminum cradle design suits Badland 3-ton jacks and compatible Pro Eagle jacks with similar wheel spacing; users supply their own ratchet strap.

Aluminum roll-on wheel cradles let you position a compatible 3-ton jack by rolling its wheels into place, simplifying loading compared with lifting the jack onto a fixed holder. Foruly lists compatibility with Badland and similar-wheel-spacing Pro Eagle off-road floor jacks for trucks, trailers, and shop storage.

The pair of cradles is intended for a Badland 3-ton off-road floor jack and compatible Pro Eagle jacks with similar wheel spacing, so wheel layout matters to the fit. Rolling the jack wheels into the aluminum cradles offers a direct positioning workflow for a truck bed, trailer, overland build, or shop. A ratchet strap can help secure the jack during transport, but it is not included; buyers must supply their own strap.

Skip it if you need a complete strap-and-hardware package; Fenix Motorsports' 3-ton Badlands holder lists mounting hardware, handle clips, and a linch pin.

This suits owners who want to roll a compatible 3-ton floor jack into place in a truck bed, trailer, or shop. Confirm wheel-spacing compatibility and provide your own ratchet strap for transport.

Listed on Amazon as: Roll-On Jack Mounts for Badland 3 Ton Off-Road Jack

#5

5. Fenix Motorsports 1.5-Ton Mount

• Material: Steel
• Weight: 15 lb
• Compatible with Vehicle Type: ATV, Car, Trailer, Truck, UTV

Best for: 1.5-Ton Badlands Custom Builds.

Why it ranks #5: This purpose-built 1.5-ton Badlands jack holder allows vertical or horizontal mounting and has an integrated anti-rattle handle holder.

An integrated anti-rattle handle holder captures the jack handle, helping keep it silent and secured while a vehicle tackles rough terrain. Fenix Motorsports' Gen 2 mount is specified for the 1.5-ton Harbor Freight Badlands jack and offers vertical or horizontal mounting for custom off-road setups.

The 1.5-ton capacity specification and Badlands jack fit make this a focused option for owners of that jack rather than a generic high-lift mount. Its handle holder is described as anti-rattle, reducing loose-tool clanking on the trail, and two mounting orientations offer flexibility for bed racks, roll cages, and 4×4 builds. Raw steel is supplied for custom finishing, so buyers can choose a finish themselves; the listing includes the mount.

Skip it if you own a 3-ton Badlands jack; Fenix Motorsports' 3-ton holder is specified for that larger-capacity model.

This fits builders using the 1.5-ton Badlands jack on a bed rack, roll cage, or 4×4. Choose it for captured handle storage and orientation flexibility, but be prepared to finish the raw steel yourself.

Listed on Amazon as: Fenix Motorsports Offroad Jack Holder for 1.5 Ton Harbor Freight Badlands Jack – Gen 2 – Compatible with Bed Racks, Roll Cages, and 4×4 Builds

#6 · Best Tube Fit

6. Kavius Hi-Lift Tube Mount

• Material: Aluminum
• Weight: 1.13 kg
• Compatible with Vehicle Type: ATV, Bumpers, Farm Vehicles, Roller Cages…

Best for: Tubular Rack Farm-Jack Mounting.

Why it ranks #6: The two-bracket set fits round or square tubes from 1 to 2.5 inches and includes stainless-steel hardware for mounting a high-lift jack.

A two-mount set fits round or square tubing from 1 to 2.5 inches, giving owners a way to secure a high-lift jack on compatible racks, cages, or vehicle bars. Structural aluminum and stainless-steel hardware support a lighter mounting setup with hardware sizes included for installation.

The tube-diameter range is the key fit boundary: the mounts are intended for safe, firm 1-to-2.5-inch round or square tubes. That makes them useful across listed applications such as roof racks, bumpers, roller cages, and trucks when the tubing matches. The pair uses structural aluminum with stainless-steel hardware, and its anodized surface is described as corrosion-resistant. Installation involves loosening a bracket bolt, positioning the bracket on the tube, then tightening it fully.

Skip it if you need a bracket for a roof rack's M6/M8 slots rather than tubing; BUNKER INDUST's farm-jack mounts specify those slots.

This suits high-lift jack owners with compatible round or square tubes on a roof rack, cage, bumper, or truck. Measure the tube first: the stated 1-to-2.5-inch range is a firm installation boundary.

Listed on Amazon as: Hi Lift Jack Mount 2-Pack Set Fits for Round or Square Tubes 1"-2.5"

#7

7. BUNKER INDUST Farm Jack Mount

• Material: Stainless Steel
• Weight: 2.4 lb
• Compatible with Vehicle Type: ATV

Best for: M6/M8 Roof-Rack Farm Jacks.

Why it ranks #7: This stainless-steel pair is designed for standard farm jacks and M6/M8 single- or dual-slot roof-rack platforms and crossbars.

Compatibility with M6/M8 single- or dual-slot platforms and crossbars lets these brackets secure a standard farm jack on many roof-rack systems. BUNKER INDUST supplies a two-piece stainless-steel set with bolt-on installation, keeping the jack accessible while using space on the rack.

The slot compatibility is specific: the brackets are intended for M6/M8 single- or dual-slot platforms and crossbars, including systems such as Rhino-Rack, Thule, and Front Runner. That gives roof-rack users a clear mounting route without relying on a tube-diameter fit. The product also states compatibility with most standard farm jacks, and its stainless-steel construction supplies the listed material. Bolt-on installation provides a straightforward attachment method for keeping the jack out of the vehicle interior.

Skip it if you need clamps for 1-to-2.5-inch tubing instead of rack slots; Kavius' two-piece set is specified for round or square tubes.

This suits roof-rack users carrying a standard farm jack on an M6/M8 slotted platform or compatible crossbar. Check the rack's slot system before choosing it, since its listed fit is slot-based.

Listed on Amazon as: BUNKER INDUST Farm Jack Mount for Roof Rack, 2 Pcs High Lift Jack Mounting Brackets Works with M6/M8 Slots and Most Standard Farm Jacks

#8

8. Hooke Road High Lift Brackets

• Material: Carbon Steel
• Weight: 1.2 lb
• Compatible with Vehicle Type: Truck

Best for: Hooke Road Aluminum-Rack Owners.

Why it ranks #8: These carbon-steel brackets mount a lift jack front to back on most Hooke Road aluminum bar roof racks using M8 T-nuts.

M8 T-nuts and a clamping lever handle attach these two brackets to most Hooke Road aluminum bar roof racks, creating a front-to-back platform for a high-lift jack. The rack-mounted setup uses roof space for recovery gear and includes the mounting hardware kit.

The M8 T-nuts and clamping lever provide the listed attachment method, helping owners install the brackets on compatible Hooke Road aluminum bar roof racks. Their front-to-back orientation uses roof-rack space as a carrying and storage platform for a lift jack, leaving vehicle interior space available for other gear. The pair is made from carbon steel and comes with mounting hardware and instructions. Its stated fit centers on Hooke Road aluminum bar racks, not a universal tube clamp.

Skip it if you use an M6/M8 slotted rack from another listed brand; BUNKER INDUST's mounts specify Rhino-Rack, Thule, and Front Runner compatibility.

This suits Hooke Road aluminum bar rack owners carrying a high-lift jack front to back on the roof. Verify the rack style and M8 attachment fit, since the listing does not establish universal compatibility.

Listed on Amazon as: Hooke Road 2PCS High Lift Jack Mount Brackets on Roof Rack, Farm Jack Mounting Platform for Jeep TJ JK JL Gladiator Tacoma Aluminum Roof Racks from Hooke Road

#9

9. TeraFlex JL Hi-Lift Bracket

• Material: Alloy Steel
• Weight: 8 lb

Best for: JL Wrangler Tailgate Bracket Buyers.

Why it ranks #9: The alloy-steel bracket fits JL Wrangler two- and four-door models and bolts to the factory tailgate, but will not work with MOPAR Hinge Reinforcement.

A 3/16-inch laser-cut steel bracket bolts directly to the factory tailgate, providing a secure mounting point for a Hi-Lift jack on two- or four-door JL Wranglers. The bracket also incorporates a CB antenna mount, adding another use at the tailgate mounting location.

TeraFlex lists fit for both JL Wrangler two-door and JL Wrangler Unlimited four-door models, giving owners of either body style a specified application. The alloy-steel bracket is powder coated, while its direct-to-factory-tailgate attachment provides a defined installation location. A built-in CB antenna mount adds functionality for owners using that equipment. The listing clearly states that it will not work with MOPAR Hinge Reinforcement, so that configuration is a critical fit limitation.

Skip it if you use MOPAR Hinge Reinforcement; Dominion OffRoad's JL-specific stealth kit is another listed jack-mount option for JL owners.

This suits JL Wrangler owners who want a tailgate-mounted Hi-Lift bracket with an integrated CB antenna mount. Check the hinge setup before installation, because it will not work with MOPAR Hinge Reinforcement.

Listed on Amazon as: TeraFlex 4838270 JL: Hi-Lift Jack Mount Bracket Kit , Black

#10

10. Dominion OffRoad JL Mount

• Weight: 10 lb

Best for: 2018-Onward Jeep JL Owners.

Why it ranks #10: This stealth Hi-Lift kit is specific to 2018-and-newer Jeep JL Wranglers and does not fit the JK, making it a narrow vehicle-specific choice.

A vehicle-specific stealth mounting kit places a Hi-Lift jack on the 2018-and-newer Jeep JL Wrangler, giving owners a dedicated storage solution for a tool used for specialized recovery tasks. The listing identifies this as the JL version and explicitly excludes the Jeep JK.

The JL-specific application helps owners target the correct Wrangler generation instead of choosing a general tube or rack mount. Dominion OffRoad describes the kit as a stealth Hi-Lift jack mount for 2018-and-newer JL Wranglers, with optional Quick Fist axe and shovel mounts available. The jack, shovel, axe, and Jeep are not included. Because the product expressly does not fit the JK, buyers should treat model generation as the primary installation boundary before selecting this kit.

Skip it if you have a Jeep JK rather than a JL Wrangler; TeraFlex's 4838270 bracket kit is listed for JL two- and four-door models.

This is for JL Wrangler owners seeking a vehicle-specific stealth mount for a Hi-Lift jack. The model boundary is decisive: it is the JL version and does not fit the Jeep JK.

Listed on Amazon as: Hi-Lift Jack Mount kit intended for Jeep JL 4-Door Wrangler – Stealth – Made by Dominion OffRoad (Important – Read Fitment Details in Description Below)