Best Pintle Hitch Mounting Plate for 2-Inch and 2.5-Inch Receivers

#1 · Best Overall

1. Mytee Products Pintle Mount

• Weight: 15.7 lb
• Compatible with Vehicle Type: Trailer

Best for: 20,000-pound standard receivers.

Why it ranks #1: Fits a standard 2-inch receiver and lists a 20,000-pound gross trailer weight limit, solid steel construction, and three height adjustments.

A 20,000-pound gross trailer weight limit sets the Mytee Products plate apart among standard 2-inch receiver mounts. Its four-hole, three-position layout adds height adjustment, while the 9-inch length gives buyers a stated shank dimension for planning their hitch setup.

The plate fits inside a standard 2-inch hitch, making receiver compatibility straightforward for that common opening. Four holes provide three height adjustments, which can help align the pintle hook with trailer height. Mytee lists a 20,000-pound gross trailer weight working load limit and high-quality steel material. The 9-inch length helps buyers assess the mount’s reach, while the supplied component description does not list a pin or clip; check the included hardware details if those are needed for installation.

Skip it if you need an included 5/8-inch pin and clip; Nilight 92128B lists both with its 2-inch mount.

This plate fits buyers seeking a 2-inch receiver mount with three height options and a 20,000-pound gross trailer weight limit. Its listed 9-inch length aids planning, but the supplied component facts do not specify a receiver pin.

Listed on Amazon as: Mytee Products 3 Position Pintle Hitch Mount Plate for 2" Hitch Reciever – 20,000 lbs – Solid Steel, 9" Length – Pintle Hook Hitch Mounting Plate

#2 · Highest Capacity

2. WUTIST Adjustable Pintle Mount

• Material: Carbon Steel
• Weight: 7.27 kg
• Compatible with Vehicle Type: Tractor, Truck, RV, UTV, Bus

Best for: 20,000-pound adjustable towing.

Why it ranks #2: Fits a standard 2-inch receiver, offers three height positions with up to 6.5 inches of drop, and lists a 20,000-pound rating.

A 20,000-pound gross trailer weight rating gives the WUTIST plate a clear capacity target, while its three-position setup offers up to 6.5 inches of drop. It fits standard 2-inch receivers and names compatibility with several pintle hook models.

The standard 2-inch receiver fit avoids modifications according to the listing, and three height positions provide adjustment for level towing, including up to 6.5 inches of drop. Its 20,000-pound gross trailer weight rating sets a stated capacity boundary. The listed compatible pintle-hook models include PH6, PH10, PH15, and PH20, giving buyers named hardware examples to check against their setup. Heavy-duty steel construction with reinforced welds is specified; no coating details are available in the supplied features.

Skip it if you need a stated 9-inch shank length; Mytee Products PH-MP2-FBA lists that dimension for its 2-inch mount.

Consider this mount for a standard 2-inch receiver setup needing three positions, up to 6.5 inches of drop, and a 20,000-pound rating. Confirm the named hook compatibility against your hardware before selecting it.

Listed on Amazon as: 3 Position Pintle Hitch Mount Plate Adjustable Steel for 2" Hitch

#3 · Most Height Positions

3. CURT 48341 Pintle Mount

• Material: Carbon Steel
• Compatible with Vehicle Type: Trailer

Best for: Fine trailer-height adjustment.

Why it ranks #3: Its 2-by-2-inch shank fits a standard receiver, and six height positions help accommodate trailer leveling; capacity is not listed.

Six height positions are the key advantage of the CURT 48341, giving buyers more opportunities to level a trailer than a three-position plate. Its 2-by-2-inch shank fits a matching receiver, and the face plate accepts CURT adjustable pintle hooks or ball-and-pintle combinations.

The six-position adjustment supports more precise trailer leveling when receiver and trailer heights differ. At the face plate, holes spaced 1-3/4 inches high by 3-5/16 inches wide provide the mounting pattern for CURT adjustable pintle hooks and ball-and-pintle combinations. The solid-steel shank is specified for strength, and the 2-by-2-inch receiver fit identifies the required hitch opening. This is a plate for buyers with compatible CURT hardware; the supplied information does not state a towing-capacity rating.

Skip it if you need a stated gross trailer weight rating before choosing a mount; WUTIST GO-5234 lists a 20,000-pound rating.

Consider the 48341 when precise leveling and compatibility with CURT adjustable pintle or ball-and-pintle hardware matter. Its six settings are useful for adjustment, but the supplied listing gives no towing-capacity figure to compare with your load.

Listed on Amazon as: Curt Manufacturing 48341 13 in Plate 12 1/2 in Shank

#4 · Pin Included

4. Nilight 3-Position Pintle Mount

• Material: Alloy Steel
• Weight: 7.21 kg
• Compatible with Vehicle Type: Car, RV, Truck, Van

Best for: 14,000-pound towing setups.

Why it ranks #4: For a 2-inch receiver, it lists a 14,000-pound gross trailer weight limit, three height adjustments, and includes a 5/8-inch pin and clip.

A stated 14,000-pound gross trailer weight rating gives the Nilight mount a clear capacity point for 2-inch receiver towing. Its four-hole plate provides three height settings, while the included 5/8-inch pin and clip give buyers key receiver-retention hardware in the package.

The 2-inch by 9-inch shank fits a standard 2-inch receiver, and the 5-by-7.38-inch plate carries four holes for three height choices. That lets the towing setup be adjusted for trailer height, while the stated 2,800-pound tongue-weight limit and 14,000-pound gross trailer weight rating clarify its listed capacity boundaries. Alloy-steel construction is specified. The supplied components include a 5/8-inch pin and clip, so those pieces are accounted for when assembling the mount to the receiver.

Skip it if you need a 20,000-pound gross trailer weight rating; Mytee Products PH-MP2-FBA lists that higher limit for its 2-inch mount.

This is a practical match for a 2-inch receiver setup needing three mounting heights and a stated 14,000-pound gross trailer weight limit. Check that the trailer’s load stays within both the gross and tongue-weight ratings.

Listed on Amazon as: Nilight 3-Position Pintle Hook Mount for 2" Hitch Receiver Solid Steel MGTW 14,000 lbs 9-Inch Length Black Pintle Hook Hitch Mounting Plate

#5

5. CURT 48325 Pintle Mount

• Material: Alloy Steel
• Weight: 16.8 lb
• Compatible with Vehicle Type: Trailer

Best for: 15,000-pound drop adjustment.

Why it ranks #5: This 2-inch-receiver mount lists three adjustment positions, a 6.5-inch maximum drop, and a 15,000-pound capacity.

A maximum 6.5-inch drop gives the CURT 48325 a specific leveling option for trailers sitting below the receiver. It fits a 2-inch hitch receiver, offers three height positions, and carries a stated 15,000-pound rating for buyers matching capacity and geometry.

The 2-inch receiver fit makes the required hitch opening explicit, while three height settings let the mount adapt to different trailer heights. Its maximum 6.5-inch drop applies only in the drop position, an important boundary when planning level towing. CURT specifies face-plate holes spaced 1-3/4 inches high by 3-5/16 inches wide and compatibility with multiple accessories. The 15,000-pound capacity helps define its towing limit; the listing does not give a maximum rating for every accessory combination.

Skip it if you need a 20,000-pound rating; WUTIST GO-5234 lists that capacity for a 2-inch receiver mount.

The 48325 suits a 2-inch receiver owner who needs a defined drop option and a 15,000-pound rating. Its 6.5-inch figure is drop-position only, so verify that the intended orientation provides the needed trailer height.

Listed on Amazon as: CURT 48325 Adjustable Pintle Mount for 2-Inch Hitch Receiver, 15,000 lbs., 6-1/2-Inch Drop, 8-Inch Length

#6

6. ALMULOO 3-Position Pintle Mount

• Material: Carbon Steel
• Compatible with Vehicle Type: Bus, RV, Truck, Van

Best for: 20,000-pound 2-inch setups.

Why it ranks #6: The listing identifies a 2-inch hitch and a 20,000-pound rating, but provides fewer details about dimensions and adjustment than higher-ranked options.

A listed 20,000-pound capacity gives the ALMULOO plate a clear specification for heavy towing setups using a 2-inch hitch. Its three-position adjustment lets buyers choose among mounting heights, pairing a familiar receiver size with a stated load boundary for the towing arrangement.

The product title identifies a 2-inch hitch and a 20,000-pound rating, making receiver size and listed capacity the main checks for a prospective buyer. Its three-position format offers height choice for matching the mount to a trailer setup. Carbon steel is the specified material, and the included component is one adjustable pintle hitch mount plate. The supplied information does not give plate dimensions, drop measurement, or additional installation hardware, so those details should not be assumed from the capacity or position count.

Skip it if you need six adjustment positions for finer height selection; B&W 14004 lists a six-position layout.

This plate suits a buyer seeking a 2-inch hitch mount with three height choices and a stated 20,000-pound rating. The available details do not specify dimensions or included receiver pin, so account for those requirements separately.

Listed on Amazon as: 20,000 lbs 3 Position Pintle Hitch Mount Plate for 2" Hitch

#7

7. Buyers Products PM25812 Mount

• Material: Carbon Steel
• Weight: 11.1 lb
• Compatible with Vehicle Type: Trailer, Truck

Best for: 2.5-inch receiver owners.

Why it ranks #7: Its three-position plate accommodates trailer height changes, but it fits a 2.5-inch receiver rather than the more common 2-inch size.

A 2.5-inch receiver shank sets the Buyers Products PM25812 apart, letting owners of that larger receiver add a pintle hook or combination hitch mount. Its three-position layout provides high and low mounting choices, giving trailer-height differences a practical adjustment point without changing the receiver setup.

The 2.5-inch receiver fit is the key compatibility detail: this mount slides into that size opening, rather than the common 2-inch format found on many alternatives. Its mounting plate accepts a variety of pintle hooks and combination hitches, while the high- and low-position options help accommodate trailer height. Carbon steel construction and an 11.1-pound item weight are specified; the supplied information does not give a towing-capacity figure, so buyers should not infer one from the material alone.

Skip it if you need six distinct height settings; CURT 48341 offers six-position adjustment for more precise trailer leveling.

Choose this mount if your truck or trailer has a 2.5-inch receiver and you need a plate for a pintle hook or combination hitch. Its high/low adjustment helps with trailer height, but the listing supplies no towing-capacity rating.

Listed on Amazon as: Buyers Products PM25812 3-Position Pintle Mount for 2.5 Inch Receiver

#8

8. metlead Pintle Hitch Mount

• Material: Carbon Steel
• Weight: 18 lb

Best for: 2.5-inch receiver heavy towing.

Why it ranks #8: A 2.5-inch shank and stated 20,000-pound capacity suit larger receivers, but its fixed plate height offers less adjustment detail.

A one-piece solid-steel build rated to 20,000 pounds makes the metlead mount a candidate for demanding towing with a 2.5-inch receiver. Its 12.5-inch-high plate and carbide powder coating add useful details for buyers weighing mounting geometry and exposure to road conditions.

The 2.5-by-2.5-inch shank is specified for industry-standard 2.5-inch receivers, so the receiver size is clear before installation. A 12.5-inch plate height defines the mounting profile, while the one-piece solid-steel construction is rated for up to 20,000 pounds. The carbide powder coating is described as resisting chipping, scratches, and rust, a useful surface treatment for outdoor towing exposure. The listing includes one pintle hitch mount, not a pintle hook.

Skip it if you use a 2-inch receiver; Mytee Products PH-MP2-FBA fits a standard 2-inch hitch instead.

Choose this mount for a 2.5-inch receiver setup where the 20,000-pound rating, 12.5-inch plate, and coated steel construction suit the job. The supplied listing includes the mount only, so source the pintle hook separately.

Listed on Amazon as: Pintle Hook Hitch Mount, Fits 2-1/2" Trailer Hitch Receivers

#9

9. ANGCOSY 3-Position Pintle Mount

• Material: Alloy Steel
• Weight: 4.5 kg
• Compatible with Vehicle Type: Car, Truck, Van, RV, etc.

Best for: Weather-treated 10,000-pound towing.

Why it ranks #9: Fits a 2-inch receiver and lists a 10,000-pound maximum towing capacity with three positions, below the stated capacities of several alternatives.

A black E-coat surface treatment is the defining feature of the ANGCOSY mount, with rust and corrosion protection specified for harsh weather. Its 2-inch receiver fit and 10,000-pound towing capacity identify the setup and load limit before buyers choose this three-position plate.

The 2-inch receiver compatibility suits a standard-size hitch opening, and the stated 10,000-pound maximum towing capacity sets a clear load ceiling. Three positions provide height adjustment, while the welded, hollow square tube construction forms the mount’s structural shank. The black E-coat is described as heat-resistant and anti-rust, supporting use across varied conditions. Installation guidance says to insert the mount, align the receiver holes, and secure it with a safety lock; the supplied facts do not specify that lock as included.

Skip it if you need a 15,000-pound rating; CURT 48325 lists that capacity for its 2-inch receiver mount.

This mount fits buyers with a 2-inch receiver towing within the 10,000-pound limit who value an E-coat treatment and adjustable height. Keep both the receiver connection and any securing hardware in view during installation.

Listed on Amazon as: 3-Position Pintle Mount for 2" Hitch Receiver, 10,000 lbs, 9-Inch Length, Black

#10

10. B&W 16K Pintle Mount

• Material: Alloy Steel
• Weight: 5 lb
• Compatible with Vehicle Type: Trailer

Best for: Six-position 16,000-pound setups.

Why it ranks #10: Its 2-inch shank, 14 holes, and six positions suit pintle mounting, but the listing gives a 16,000-pound rating and limited fit details.

Fourteen plate holes create six height positions on the B&W 14004, giving this 2-inch pintle mount more adjustment choices than a three-position design. Its 13-inch shank and 16,000-pound rating provide two further fit and capacity details for trailer buyers.

The 2-inch shank fits the matching receiver size, and its 13-inch length helps buyers assess how the mount will sit in their hitch setup. Fourteen holes provide six positions, offering multiple height choices for setting up the pintle plate. B&W lists a 16,000-pound rating and alloy-steel construction. These details support comparison of receiver compatibility, adjustment range, and capacity, though the supplied information does not provide a drop measurement or face-plate hole spacing.

Skip it if you need a 20,000-pound rating; metlead 11036539 lists that capacity for a 2.5-inch receiver mount.

The B&W 14004 suits buyers who want six positions, a 13-inch shank, and a stated 16,000-pound rating. Its listed receiver size is 2 inches; the supplied facts do not state drop or face-plate dimensions.

Listed on Amazon as: B&W Trailer Hitches 16K Pintle Mount, 2” x 13" Shank, 14-Hole 6-Position – PMHD14004