A strong motorcycle carrier for a truck combines a compatible 2-inch hitch receiver, capacity that safely exceeds the bike’s weight, and a ramp suited to loading it. The VEVOR 600 LBS Steel Motorcycle Carrier is a standout for truck owners seeking a steel rack with a long 47-inch ramp, while other options add tilting ramps, two-bike tracks, or aluminum construction. This roundup compares ten hitch-mounted carriers using their listed capacities, materials, vehicle compatibility, and included features—not assumed fit or performance.
Check your truck’s hitch rating and the carrier’s requirements before buying; the carrier’s own capacity is only one limit in the complete setup. Also consider bike width and the loaded carrier’s distance from the ground, because those details can affect fit and loading practicality.
The VEVOR 600 LBS Steel Motorcycle Carrier is the best overall choice here for truck owners: its listing explicitly names cars and trucks with a 2-inch hitch receiver, gives it a 600-pound capacity, and includes a 47-inch ramp, ratchet straps, and a stabilizer. It also provides a 76-by-7-inch platform and recommends an installation height of 7.87 to 19.7 inches from the center hole to the ground. Confirm truck hitch limits and motorcycle weight before use.
Our Top Picks
Best OverallVEVOR Steel Motorcycle Carrier
Explicitly fits cars and trucks with a 2-inch receiver, supports 600 pounds, and includes a 47-inch ramp, ratchet straps, and stabilizer.
View on Amazon
Long-Ramp OptionRIGMEC Steel Motorcycle Carrier
Lists a 600-pound capacity and car or truck use with a 2-inch receiver; its longer ramp, four ratchet straps, and hook stabilizers add utility.
View on Amazon
Tilting RampMockins Tilting Motorcycle Carrier
Fits cars, trucks, and vans with 2-inch receivers, supports 500 pounds, and accommodates tires up to 5.5 inches wide; straps and hitch lock are included.
View on Amazon- Wide-Tire Fit Goplus Motorcycle Hitch Carrier
- Truck and SUV Fit PLITEDDE 500 LBS Carrier
Compare motorcycle carriers by fit, capacity, and loading features
| # | Product | Load Capacity | Material Type | Compatible with Vehicle Type | Buy |
|---|---|---|---|---|---|
| 1 | 1. VEVOR Steel Motorcycle CarrierBest Overall | 600 lb | Q235B Steel | Car | View on Amazon |
| 2 | 2. RIGMEC Steel Motorcycle CarrierLong-Ramp Option | 600 lb | Carbon Steel, Metal | Motorcycle | View on Amazon |
| 3 | 3. Mockins Tilting Motorcycle CarrierTilting Ramp | 500 lb | Steel | Car, Truck, Van | View on Amazon |
| 4 | 4. Goplus Motorcycle Hitch CarrierWide-Tire Fit | 600 lb | Steel | vehicle with 2" receiver | View on Amazon |
| 5 | 5. PLITEDDE 500 LBS CarrierTruck and SUV Fit | 500 lb | Alloy Steel, Aluminum | Car | View on Amazon |
| 6 | 6. ECOTRIC 500 LB CarrierBroad receiver-class compatibility | 500 lb | Steel | Vehicle with 2" square receiver (class II… | View on Amazon |
| 7 | 7. VEVOR Aluminum Motorcycle CarrierAluminum two-bike carrier | 600 lb | Aluminum | Scooter | View on Amazon |
| 8 | 8. ECOTRIC 600 LB CarrierRust-resistant steel carrier | 600 lb | steel | Dirt Motorcycle | View on Amazon |
| 9 | 9. RIGMEC Two-Bike CarrierTwo-bike hitch transport | 600 lb | Steel | Motorcycle | View on Amazon |
| 10 | 10. Black Widow Pro Double CarrierLightweight two-bike setup | 600 lb | Aluminum | Car | View on Amazon |
Detailed Reviews: Best Motorcycle Carriers For Trucks

#1 · Best Overall
1. VEVOR Steel Motorcycle Carrier
- Load Capacity: 600 lb
- Material Type: Q235B Steel
- Compatible with Vehicle Type: Car
Best for: Long-ramp, higher-capacity hauls.
Why it ranks #1: Explicitly fits cars and trucks with a 2-inch receiver, supports 600 pounds, and includes a 47-inch ramp, ratchet straps, and stabilizer.
A 47-inch loading ramp and 600-pound capacity make this VEVOR steel carrier a practical option for riders who need to roll a heavier motorcycle onto a truck-mounted rack. Its 76-by-7-inch loading area provides room for positioning, while the supplied details specify a 2-inch hitch receiver and a recommended installation height range.
The longer 47-inch ramp gives the bike a longer approach for loading, and the stated 600-pound capacity accommodates heavier motorcycles within the carrier’s limit. Its 76-by-7-inch platform gives the tires a defined track, while the included ratchet straps and stabilizer address securing the load and hitch movement. The steel construction is a substantial choice for truck transport, but the carrier itself weighs 61.7 pounds, a factor to account for when handling or storing it.
- 600-pound stated load capacity
- 47-inch loading ramp
- 76-by-7-inch carrier platform
- Includes ratchet straps and stabilizer
- At 61.7 pounds, the steel carrier takes effort to handle off the hitch.
Skip it if you need a carrier that transports two motorcycles; VEVOR’s TD-1004-08 lists capacity for two.
For a truck owner transporting one motorcycle within 600 pounds, this VEVOR pairs a longer ramp with a broad track and securing accessories. Check the stated 2-inch receiver and recommended installation-height range against your vehicle setup.
Full product details
| Brand | VEVOR |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Car |
| Included Components | 1 x Motorcycle Hitch Carrier |
| Item Dimensions | 77 x 33.1 x 6.1 inches |
| Item Weight | 61.7 pounds |
| Dimensions | 77 x 33.1 x 6.1 inches |
| Load Capacity | 600 pounds |
| Manufacturer | VEVOR |
| Part Number | 600 LBS Steel Motorcycle Carrier |
| Material | Q235B Steel |
| Model Number | TD-1004-03 |

#2 · Long-Ramp Option
2. RIGMEC Steel Motorcycle Carrier
- Load Capacity: 600 lb
- Material Type: Carbon Steel, Metal
- Compatible with Vehicle Type: Motorcycle
Best for: Strapped, anti-tilt transport.
Why it ranks #2: Lists a 600-pound capacity and car or truck use with a 2-inch receiver; its longer ramp, four ratchet straps, and hook stabilizers add utility.
An anti-tilt locking device and four ratchet straps give this RIGMEC carrier several specified measures for stabilizing a motorcycle during transport. Its steel frame supports up to 600 pounds, and the longer ramp helps roll a scooter, dirt bike, or motocross bike onto the rack.
The anti-tilt lock addresses carrier movement at the hitch, while four ratchet straps and hook stabilizers help restrain the motorcycle and reduce wobbling. A 600-pound limit covers a range of bike weights, and the 77-by-32.5-inch overall dimensions help when considering truck setup and storage. The product description also calls out quick assembly and a loading ramp. These components make securing and loading part of the package, though the supplied details do not state the ramp length.
- 600-pound stated load capacity
- Anti-tilt locking device
- Four ratchet straps and hook stabilizers
- 77-by-32.5-inch listed dimensions
- The supplied details do not specify the loading ramp’s length.
Skip it if you need a self-storing ramp with a stated length; RIGMEC’s BGH6JMYT7765 lists a 47-inch ramp.
This RIGMEC suits a buyer seeking a steel carrier with anti-tilt hardware and multiple straps for a bike up to 600 pounds. Its ramp length is unspecified, so loading space and ramp reach deserve consideration.
Full product details
| Brand | RIGMEC |
|---|---|
| Color | Black-1 |
| Compatible with Vehicle Type | Motorcycle |
| Item Dimensions | 77 x 32.5 x 5 inches |
| Item Weight | 19 kg |
| Dimensions | 77 x 32.5 x 5 inches |
| Load Capacity | 600 pounds |
| Manufacturer | RIGMEC |
| Part Number | 9C7O4EBHV |
| Material | Carbon Steel, Metal |
Listed on Amazon as: Motorcycle Carrier, 600 LBS Steel Motorcycle Carrier Hitch Mount with Longer Ramp, Scooter Dirt Bike Trailer Hauler, for Car, Truck with 2" Hitch Receiver
View on Amazon
#3 · Tilting Ramp
3. Mockins Tilting Motorcycle Carrier
- Load Capacity: 500 lb
- Material Type: Steel
- Compatible with Vehicle Type: Car, Truck, Van
Best for: Tilting ramp for wide tires.
Why it ranks #3: Fits cars, trucks, and vans with 2-inch receivers, supports 500 pounds, and accommodates tires up to 5.5 inches wide; straps and hitch lock are included.
A tilting ramp and support for tires up to 5.5 inches wide give the Mockins carrier a useful combination for loading fat-tire e-bikes, dirt bikes, and scooters. Its 83-inch steel frame is longer than many carrier tracks, and the listed 500-pound capacity sets a clear limit for the combined load.
The tilting ramp is intended to ease mounting and dismounting, while the 83-by-6-inch frame provides a long track for rolling a bike into position. Compatibility with tires up to 5.5 inches wide makes it relevant to fat-tire models, and the 2-inch receiver requirement suits compatible truck hitches. The kit also includes four heavy-duty ratchet straps, four loop straps, a hitch stabilizer, and a hitch lock, giving buyers several specified securing components to use.
- Tilting loading ramp
- Supports tires up to 5.5 inches wide
- 83-inch steel carrier frame
- Includes four ratchet straps and four loop straps
- The 500-pound capacity is lower than the 600-pound options in this roundup.
Skip it if you need more than 500 pounds of capacity; the RIGMEC 9C7O4EBHV lists a 600-pound limit.
Choose this Mockins for a compatible 2-inch truck receiver and a bike with tires no wider than 5.5 inches, especially if a tilting ramp and bundled straps suit your loading routine. Keep the full load within 500 pounds.
Full product details
| Brand | Mockins |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Car, Truck, Van |
| Included Components | 1 x Hitch Mount Motorcycle Carrier with Tilting Ramp (Patent Pending) with 1 x License Plate Holder, 1 x Hitch Stabilizer and 1 x Hitch Lock, 1 x Set of Reflector Stickers, 1 x Storage Bag for Accessories, 4 x Heavy-Duty Ratchet Straps and 4 x Strong Loop Straps |
| Item Dimensions | 83 x 6 x 8 inches |
| Item Weight | 75 pounds |
| Dimensions | 83 x 6 x 8 inches |
| Load Capacity | 500 Pounds |
| Manufacturer | Mockins |
| Part Number | MA-HM-DBC-83-TLTS-96 |
| Manufacturer Warranty Description | 5 Year Limited Warranty |
| Material | Steel |
| Model Number | MA-HM-DBC-83-TLTS-96 |
Listed on Amazon as: Mockins 83" Tilting Motorcycle Hitch Carrier with Ramp w/ 500 Lbs. Capacity
View on Amazon
#4 · Wide-Tire Fit
4. Goplus Motorcycle Hitch Carrier
- Load Capacity: 600 lb
- Material Type: Steel
- Compatible with Vehicle Type: vehicle with 2" receiver
Best for: Wide-tire steel carrier.
Why it ranks #4: Fits vehicles with a 2-inch receiver and carries up to 600 pounds; its listed tire fit reaches 7.5 inches, with a loading ramp and two straps.
A stated fit for tires up to 7.5 inches wide makes the Goplus steel carrier relevant to riders whose motorcycle tires exceed the width supported by many racks. It has a 600-pound capacity and includes two straps and a loading ramp for truck-hitch transport.
The 7.5-inch tire-width limit is the main fit detail for wider-tire bikes, while the 600-pound capacity sets the maximum load. Its steel construction is described as strong and firm, with resistance to rust in rain, supporting outdoor transport. The supplied information specifies a 2-inch receiver, and the included ramp and two straps cover basic loading and securing tasks. Goplus recommends staying below 55 mph with a motorcycle loaded, with actual speed adjusted for motorcycle weight.
- Fits tires up to 7.5 inches wide
- 600-pound stated capacity
- Steel construction described as rust-resistant
- Includes loading ramp and two straps
- The supplied guidance recommends staying below 55 mph when loaded.
Skip it if you need included four ratchet straps; the RIGMEC 9C7O4EBHV lists four for reducing wobble during transport.
The Goplus is a fit to consider for a wide-tire motorcycle within 600 pounds and a compatible 2-inch receiver. Its stated below-55-mph guidance is an important operating boundary for loaded transport.
Full product details
| Brand | Goplus |
|---|---|
| Color | black |
| Compatible with Vehicle Type | vehicle with 2" receiver |
| Item Weight | 98 pounds |
| Load Capacity | 600 pounds |
| Manufacturer | Superbuy |
| Part Number | AT4338+XIN |
| Material | Steel |
Listed on Amazon as: Goplus Motorcycle Hitch Carrier, 600LBS Motorcycle Carrier Hitch Mount with 2 Straps, Loading Ramp, Dirt Bike Trailer, Heavy Duty Motor Cycle Rack, Fit Up to 7.5” Wide Tire
View on Amazon
#5 · Truck and SUV Fit
5. PLITEDDE 500 LBS Carrier
- Load Capacity: 500 lb
- Material Type: Alloy Steel, Aluminum
- Compatible with Vehicle Type: Car
Best for: Corrosion-resistant 500-pound hauls.
Why it ranks #5: Explicitly lists truck and SUV Class III hitch compatibility and a 500-pound capacity, with a ramp and four straps included.
A steel-and-aluminum-alloy construction with spray coating and anodizing gives the PLITEDDE carrier a specified focus on resisting rust and corrosion outdoors. Its integrated ramp supports loading and unloading, while the 500-pound capacity sets the load limit for dirt bikes and motorcycles.
The integrated ramp is intended to ease loading and unloading while helping protect the motorcycle from impact and scratches. Steel and aluminum alloy, finished with spray coating and anodizing, are specified for rust and corrosion resistance during outdoor use. A 500-pound capacity covers many dirt bikes and motorcycles within that limit, and four straps are included for securing the load. The listing identifies car compatibility, so truck owners should consider whether their particular hitch setup matches the stated fit information.
- 500-pound stated capacity
- Steel and aluminum-alloy construction
- Spray-coated and anodized finishes
- Integrated ramp and four included straps
- The listed capacity is 500 pounds, below the 600-pound options.
Skip it if you need a 600-pound load limit; PLITEDDE’s 500-pound capacity does not cover that requirement.
Choose this PLITEDDE for outdoor motorcycle hauling if its 500-pound limit and integrated ramp match your needs. The listing identifies car compatibility, so a truck buyer should pay particular attention to the stated vehicle fit.
Full product details
| Brand | PLITEDDE |
|---|---|
| Color | Black, Silver |
| Compatible with Vehicle Type | Car |
| Included Components | 1 x Motorcycle Carrier, 4 x Straps, Other Accessories for Assembly |
| Load Capacity | 500 Pounds |
| Manufacturer | PLITEDDE |
| Part Number | 500LBS |
| Material | Alloy Steel, Aluminum |
| Model Number | 500LBS |
Listed on Amazon as: 500LBS Hitch Mount Motorcycle Carrier, Heavy Duty Steel Aluminum Alloy Carrier with Loading Ramp for Dirt Bikes, Fits Truck & SUV Class III Hitch
View on Amazon
#6
6. ECOTRIC 500 LB Carrier
- Load Capacity: 500 lb
- Material Type: Steel
- Compatible with Vehicle Type: Vehicle with 2" square receiver (class II…
Best for: Broad receiver-class compatibility.
Why it ranks #6: Fits a broad range of vehicles with 2-inch Class II, III, IV, or V receivers, supports 500 pounds, and includes a loading ramp.
Compatibility with 2-inch square Class II, III, IV, and V receivers makes this ECOTRIC a flexible choice for truck owners with different hitch classes. Its ramp can be used for loading from either side, while the 500-pound capacity defines the maximum load for the steel carrier.
The specified receiver range covers four hitch classes, making this rack relevant to a wider set of vehicles that have a 2-inch square receiver. Loading from either side offers flexibility when parking or positioning the motorcycle, and the included ramp supports rolling the bike onto the frame. High-strength steel is described as resisting flaking, scratching, fading, and wear. The 500-pound limit remains the key constraint when assessing a motorcycle and any gear carried with it.
- Fits 2-inch square Class II through V receivers
- Loading possible from either side
- Includes a loading ramp
- 500-pound stated capacity
- The 500-pound capacity rules out loads above that limit.
Skip it if you need a stated 600-pound capacity; ECOTRIC’s ET-008A+ET-008B lists a 600-pound maximum.
This ECOTRIC fits buyers who value broad 2-inch receiver-class compatibility and the option to load from either side. It is a 500-pound carrier, so check the motorcycle’s transport weight before choosing it for a truck.
Full product details
| Brand | ECOTRIC |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Vehicle with 2" square receiver (class II, III, IV, OR V trailer hitch) |
| Included Components | 1 x complete set of motorcycle trailer hitch carrier+installation instruction+mounting hardware |
| Item Dimensions | 75.91 x 32.24 x 9.06 inches |
| Dimensions | 75.91 x 32.24 x 9.06 inches |
| Load Capacity | 500 Pound |
| Manufacturer | Ainuosen |
| Part Number | AI-318 |
| Material | Steel |
| Model Number | AI-318 |
Listed on Amazon as: ECOTRIC 500LB Hitch Mount Motorcycle Carrier Transportation Racks Hitch
View on Amazon
#7
7. VEVOR Aluminum Motorcycle Carrier
- Load Capacity: 600 lb
- Material Type: Aluminum
- Compatible with Vehicle Type: Scooter
Best for: Aluminum two-bike carrier.
Why it ranks #7: Its aluminum construction and 600-pound capacity distinguish it, and the 3.9-foot self-storing ramp avoids a loose ramp during travel; truck fit is not specified.
Aluminum construction paired with a 600-pound capacity gives this VEVOR carrier a distinct material choice for transporting up to two motorcycles. Its 3.9-foot ramp stores on the carrier when not in use, combining roll-on loading with a defined place for the ramp between trips.
The self-storing 3.9-foot ramp is intended to make loading easier and stays attached to the carrier when idle, simplifying ramp storage between journeys. VEVOR states that the aluminum rack can carry two motorcycles within its 600-pound capacity, which makes total load planning essential. The listed dimensions are 74.8 by 59.06 by 4.72 inches, useful when considering storage and vehicle clearance. The specifications list scooter compatibility, so confirm that this stated category matches your intended use.
- Aluminum construction
- 600-pound stated load capacity
- Listed for carrying two motorcycles
- 3.9-foot ramp stores on the carrier
- The carrier weighs 68.3 pounds despite its aluminum construction.
Skip it if you need a listed 2-inch receiver fit; the RIGMEC 9C7O4EBHV specifies a 2-inch hitch receiver.
Consider this VEVOR if you want an aluminum carrier with a ramp that stores onboard and intend to transport two bikes within 600 pounds. Its listed dimensions and scooter compatibility are relevant boundaries for truck setup and intended use.
Full product details
| Brand | VEVOR |
|---|---|
| Color | Silver |
| Compatible with Vehicle Type | Scooter |
| Included Components | 1 x Motorcycle Hitch Carrier |
| Item Dimensions | 74.8 x 59.06 x 4.72 inches |
| Item Weight | 68.3 pounds |
| Dimensions | 74.8 x 59.06 x 4.72 inches |
| Load Capacity | 600 Pounds |
| Manufacturer | VEVOR |
| Part Number | Aluminum Motorcycle Carrier 600 LBS |
| Material | Aluminum |
| Model Number | TD-1004-08 |
Listed on Amazon as: VEVOR Motorcycle Carrier, 600 LBS Aluminum Motorcycle Carrier Hitch Mount
View on Amazon
#8
8. ECOTRIC 600 LB Carrier
- Load Capacity: 600 lb
- Material Type: steel
- Compatible with Vehicle Type: Dirt Motorcycle
Best for: Rust-resistant steel carrier.
Why it ranks #8: Offers a 600-pound capacity and steel construction with a rustproof coating, but the supplied specifications do not establish truck or receiver compatibility.
A rustproof coating on its steel construction is the ECOTRIC carrier’s key practical distinction for motorcycle owners transporting a bike in wet conditions. Its listed 600-pound capacity also accommodates heavier loads within that limit, although the supplied information provides fewer fit and loading details than some competing carriers.
The steel frame is described as strong enough to hold a motorcycle firmly, and the rustproof coating is specifically intended to address exposure to rain. Together, those details suit owners who want a steel carrier for regular outdoor transport rather than a specified lightweight setup. The stated 600-pound maximum supports a broad range of bike weights, but the supplied specifications do not give a ramp length or carrier dimensions, so loading geometry is less clearly documented here.
- 600-pound stated load capacity
- Steel construction
- Rustproof coating
- Intended to carry light and heavier motorcycles
- The supplied specifications do not list a ramp or its length.
Skip it if you want a listed loading ramp and receiver compatibility; ECOTRIC’s AI-318 specifies both.
This ECOTRIC suits a buyer prioritizing coated steel and a 600-pound stated limit for motorcycle transport. The available details do not specify ramp dimensions or hitch fit, so those are important boundaries when planning loading and installation.
Full product details
| Brand | ECOTRIC |
|---|---|
| Color | BLACK |
| Compatible with Vehicle Type | Dirt Motorcycle |
| Included Components | Motorcycle Carrier Mount |
| Load Capacity | 600 pounds |
| Manufacturer | ECOTRIC |
| Part Number | ET-008A+ET-008B |
| Material | steel |
| Model Number | ET-008A+ET-008B |
Listed on Amazon as: ECOTRIC 600LBS Black Motorcycle Carrier Mount Dirt Bike Rack Hitch Hauler |
View on Amazon
#9
9. RIGMEC Two-Bike Carrier
- Load Capacity: 600 lb
- Material Type: Steel
- Compatible with Vehicle Type: Motorcycle
Best for: Two-bike hitch transport.
Why it ranks #9: Carries two motorcycles on separate tracks with 600 pounds total capacity and a self-storing ramp, but its listed vehicle compatibility is motorcycle.
Two separate tracks and a 600-pound total capacity let this RIGMEC carrier transport two motorcycles on one hitch-mounted rack. Its self-storing 47-inch ramp rolls bikes on and attaches to the carrier when idle, reducing the need to handle or separately stow the ramp between loading sessions.
The two-track arrangement is rated at 400 pounds per track, with 600 pounds total, so buyers can plan around both individual-bike and combined limits. The included 3.9-foot ramp attaches to the carrier for storage, keeping it with the rack between uses. Steel construction and the stated 2-inch receiver fit address the hitch setup, while included ratchet straps and an anti-rattle stabilizer help secure the bikes and limit hitch movement during transport.
- Carries two motorcycles
- 600-pound total capacity with 400 pounds per track
- Self-storing 47-inch ramp
- Includes ratchet straps and anti-rattle stabilizer
- The carrier weighs 85.3 pounds, making removal and storage more demanding.
Skip it if you transport only one bike and want a lighter carrier; the RIGMEC 9C7O4EBHV lists a 19-kilogram weight.
For owners moving two motorcycles on a compatible 2-inch receiver, this RIGMEC combines two tracks with a ramp that stores on the carrier. Keep each track under 400 pounds and the combined load under 600 pounds.
Full product details
| Brand | RIGMEC |
|---|---|
| Color | Black for 2 bikes |
| Compatible with Vehicle Type | Motorcycle |
| Item Weight | 85.3 pounds |
| Load Capacity | 600 Pounds |
| Manufacturer | RIGMEC |
| Part Number | Motorcycle Carrier 600 LBS |
| Material | Steel |
| Model Number | BGH6JMYT7765 |
Listed on Amazon as: Heavy Duty 600 lb Motorcycle Hitch Carrier for 2 Bikes
View on Amazon
#10
10. Black Widow Pro Double Carrier
- Load Capacity: 600 lb
- Material Type: Aluminum
- Compatible with Vehicle Type: Car
Best for: Lightweight two-bike setup.
Why it ranks #10: Supports two small bikes and 600 pounds total using a 2-inch Class III or IV receiver, but the listed vehicle compatibility is car rather than truck.
An anodized aluminum track paired with a powder-coated steel hitch tube gives the Black Widow Pro a mixed-material approach to carrying two small motorcycles. It supports up to 600 pounds total and fits Class III or IV 2-inch receivers, avoiding the need for a trailer for compatible bikes.
The dual-track setup is specified for two small motorcycles, dirt bikes, electric bikes, or fat-tire bikes, letting one carrier serve different compact-bike loads. Anodized aluminum tracks and a powder-coated steel hitch tube combine the listed materials, while the 600-pound total capacity sets the overall limit. The removable ramp supports roll-on loading and can be taken off when not needed. Compatibility is specified for Class III or IV 2-inch receivers, so hitch class is a key fit consideration.
- Carries two small motorcycles
- 600-pound total capacity
- Anodized aluminum tracks with powder-coated steel hitch tube
- Removable loading ramp
- The specified receiver fit is limited to Class III or IV 2-inch hitches.
Skip it if you have a Class II or V receiver; ECOTRIC’s AI-318 lists compatibility with those classes as well as III and IV.
This Black Widow suits a truck owner moving two small bikes with a Class III or IV 2-inch hitch. Its removable ramp and 600-pound total capacity are useful, but the specified hitch classes and bike size define the fit.
Full product details
| Brand | Black Widow |
|---|---|
| Color | black |
| Compatible with Vehicle Type | Car |
| Included Components | dirt bike carrier |
| Item Weight | 80 pounds |
| Load Capacity | 600 lb |
| Manufacturer | Black Widow |
| Part Number | AMC-600-2-PRO |
| Manufacturer Warranty Description | 1 Year |
| Material | Aluminum |
| Model Number | AMC-PRO-Parent |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Listed on Amazon as: Black Widow Pro Double Aluminum Dirt Bike Carrier w/ Ramp, 600 lb Capacity
View on AmazonAvoid receiver and clearance mismatches
A carrier’s stated load capacity does not by itself confirm that it will work safely on your truck. Check the truck’s receiver size and its rated tongue load, then account for the carrier and motorcycle together; the supplied listings do not provide truck-specific tongue-load ratings. Receiver fit also varies: several products explicitly name a 2-inch receiver, while some listings do not state receiver size or truck compatibility.
Measure the hitch center-to-ground height and compare it with the VEVOR Steel Motorcycle Carrier’s recommended 7.87-to-19.7-inch installation range, but do not treat that range as universal for other models. Finally, check the bike’s tire width and the carrier’s usable track.
For example, Mockins lists tires up to 5.5 inches and Goplus up to 7.5 inches. Confirm the bike’s actual fit and rear clearance rather than relying only on a broad vehicle-fit description.
Plan for loading and movement on the road
A ramp can simplify loading, but it does not eliminate the need to control the motorcycle and secure it carefully. Ramp designs differ: the VEVOR Steel Motorcycle Carrier has a 47-inch ramp, Mockins has a tilting ramp, and VEVOR Aluminum Motorcycle Carrier and RIGMEC Two-Bike Carrier list self-storing ramps. A longer or tilting ramp may suit a loading setup where approach angle or ramp handling matters, while a self-storing design keeps the ramp with the carrier.
A separate concern is movement at the hitch: VEVOR Steel Motorcycle Carrier includes a stabilizer, Mockins includes a hitch stabilizer and lock, and RIGMEC Steel Motorcycle Carrier lists hook stabilizers. Straps are not uniform either: some models include multiple ratchet straps, while ECOTRIC’s 600-pound listing only names the carrier mount.
Verify the complete restraint setup and follow the manufacturer’s loading and speed instructions.
How to Choose a Truck Motorcycle Carrier
Capacity and the full load
Look for a carrier rating that exceeds your motorcycle’s weight, while also checking your truck hitch’s limits separately. Listed carrier capacities range from 500 pounds on Mockins Tilting Motorcycle Carrier, ECOTRIC 500 LB Carrier, and PLITEDDE 500 LBS Carrier to 600 pounds on several steel and aluminum models. RIGMEC Two-Bike Carrier specifies 600 pounds total and 400 pounds per track, so its per-track limit matters when carrying two bikes.
The 500-pound end suits a lighter bike only when all vehicle limits permit; riders with heavier motorcycles may prefer a listed 600-pound option. Do not interpret the carrier rating as confirmation that the truck’s receiver or tongue load can carry the same amount.
Receiver and vehicle compatibility
Choose a carrier whose receiver size and vehicle fit match your truck, not just a model with a high capacity. VEVOR Steel Motorcycle Carrier names cars and trucks with a 2-inch receiver; Mockins Tilting Motorcycle Carrier lists cars, trucks, and vans, while PLITEDDE 500 LBS Carrier names truck and SUV Class III hitch compatibility. ECOTRIC 500 LB Carrier specifies 2-inch square Class II, III, IV, or V receivers.
These explicit listings give truck shoppers clearer starting points. The VEVOR Aluminum Motorcycle Carrier lists scooter compatibility, and several other products do not establish truck fit in the supplied data.
If your truck setup differs from the stated receiver, verify compatibility with the carrier maker before purchase.
Ramp, straps, and bike dimensions
Match the ramp and track details to how you load and secure your motorcycle. Ramp options include the 47-inch ramp on VEVOR Steel Motorcycle Carrier, a tilting ramp on Mockins Tilting Motorcycle Carrier, and self-storing ramps on both VEVOR Aluminum Motorcycle Carrier and RIGMEC Two-Bike Carrier. Tire-width limits are also product-specific: Mockins lists up to 5.5 inches and Goplus Motorcycle Hitch Carrier up to 7.5 inches.
Included restraints range from the VEVOR model’s ratchet straps and stabilizer to Mockins’s four heavy-duty ratchet straps and four loop straps. Riders with wider tires should check the stated fit, while frequent loaders may favor a ramp style that stores or attaches to the carrier.
Which Truck Motorcycle Carrier Should You Choose?
For a typical truck owner seeking a clearly specified 2-inch hitch fit, choose VEVOR Steel Motorcycle Carrier: it combines a 600-pound rating, 47-inch ramp, straps, and stabilizer. If you want a 600-pound steel option with four ratchet straps and hook stabilizers, consider RIGMEC Steel Motorcycle Carrier, after confirming your truck receiver fit. For a tilting ramp and stated truck compatibility, Mockins Tilting Motorcycle Carrier supports 500 pounds and tires up to 5.5 inches.
Choose Goplus Motorcycle Hitch Carrier if its 7.5-inch tire-width listing better matches your bike. PLITEDDE 500 LBS Carrier specifically names truck and SUV Class III hitches.
For two bikes, compare RIGMEC Two-Bike Carrier’s 400-pound-per-track limit with your load. Confirm hitch ratings, total load, clearance, and securement before travel.
Related Buying Guides
- Best Atv Carriers For Trucks
- Best Motorcycle Trailer Hitch Carrier
- Best Hitch Mount Motorcycle Carrier
- Best Aluminum Motorcycle Hitch Carrier
- Best Dual Motorcycle Hitch Carrier
- Best Motorcycle Racks For Trucks
Frequently Asked Questions
How do I check whether my truck’s hitch can handle a loaded motorcycle carrier?
Check the truck and hitch manufacturers’ limits for tongue weight and the receiver, then compare them with the carrier’s rating and the combined weight of the carrier and motorcycle. The lowest applicable limit governs. Verify the receiver size and carrier fit, and do not use the setup if any limit or compatibility detail is unclear.
How do I measure my motorcycle and truck to confirm carrier clearance?
Measure the motorcycle’s weight and tire width, and check the carrier’s stated limits against both. With the truck on level ground, assess the receiver height and the carrier’s position relative to the ground, bumper, exhaust, and nearby parts. Allow for loading and travel movement, and confirm the carrier’s instructions specify a suitable installation height.
What precautions should I take when loading and securing a motorcycle on a hitch carrier?
Load on stable, level ground and follow the carrier’s instructions, using a suitable ramp and a helper if needed. Keep the motorcycle controlled as it moves up the ramp, then secure it with appropriate straps at stable points. Check that the ramp and carrier are secured, and recheck the load and straps before travel.
What should I check before choosing a carrier for a two-bike load?
Compare the combined weight of both motorcycles with the carrier’s total and per-track limits, if listed, and verify that the truck hitch can support the complete loaded setup. The RIGMEC Two-Bike Carrier is listed at 400 pounds per track; confirm that limit and the receiver fit against your bikes and truck before use.
How can I tell whether a carrier’s ramp suits my motorcycle?
Compare the ramp’s length and the carrier’s listed tire-width limit with your motorcycle, and consider whether the loading approach works with your truck’s receiver height and available space. For example, the VEVOR steel carrier lists a 47-inch ramp, while Goplus lists compatibility with tires up to 7.5 inches wide; verify fit before loading.
Final Words
For a typical truck owner, the VEVOR 600-pound steel carrier is the clearest overall choice here: its listing specifies a 2-inch receiver, a 47-inch ramp, straps, and a stabilizer. First confirm your hitch limits, motorcycle weight, receiver fit, and clearance. If another feature better matches your needs, compare the tilting ramp, tire-width listing, or two-bike track limit, then verify every load and fit requirement before travel.


