Best Motorcycle Trailer Hitch Carrier: 10 Racks Compared

#1 · Best Overall

1. Black Widow SMC-600R

• Load Capacity: 600 lb
• Material: Aluminum
• Compatible with Vehicle Type: Trailer

Best for: Long ramp for wide tires.

Why it ranks #1: Its 600-pound rating, 71-inch self-storing ramp, traction-coated track, and stated 2-inch Class III or IV fit make it a well-specified all-round pick.

The 71-inch self-storing ramp and 7.25-inch tire-width allowance make this Black Widow carrier a fit for riders who need a longer loading path and a wider track. It supports up to 600 pounds and fits Class III or IV 2-inch hitches.

Because the 71-inch ramp stores directly on the carrier, there is no separate ramp to manage during transport or storage. The grit-coated track and ramp add traction at the bike’s contact surfaces, while the listed tire-width limit of 7.25 inches helps accommodate broader wheels. A 600-pound capacity covers heavier loads, but the carrier itself weighs 98 pounds, making rack handling a significant part of installation and storage planning.

Skip it if you need a lighter rack to handle; the Mockins 73-inch carrier weighs 51 pounds and has a 500-pound capacity.

This fits riders hauling a wider-tired motorcycle or scooter on a Class III or IV 2-inch hitch. Its self-storing long ramp is useful, but plan for the 98-pound carrier weight.

Listed on Amazon as: Black Widow Steel and Aluminum Motorcycle Hitch Carrier, 6 Ft Ramp, 600 lb

#2 · Best Included Loading Gear

2. VEVOR Steel Carrier

• Load Capacity: 600 lb
• Material: Q235B Steel
• dimensions: 77 x 33.1 x 6.1 in
• Compatible with Vehicle Type: Car

Best for: Higher-capacity steel hauling.

Why it ranks #2: This steel carrier supports 600 pounds and lists a 47-inch ramp, ratchet straps, and a stabilizer, with a 2-inch receiver specified in its title.

A 600-pound capacity paired with a 47-inch ramp gives the VEVOR steel carrier room for heavier motorcycles and a longer loading path. Its 76-by-7-inch carrier is specified for vehicles with a 2-inch hitch receiver, with a recommended receiver installation height of 7.87 to 19.7 inches.

The Q235B steel construction and 600-pound rating support transport of motorcycles across a broad weight range, while the 76-by-7-inch track provides a defined loading surface. A 47-inch ramp helps bridge the ground-to-carrier transition, and the listed stabilizer and ratchet straps support securing the load. At 61.7 pounds, the carrier itself is substantial to handle, so its capacity and ramp length are most relevant to buyers who can manage that rack weight.

Skip it if you prioritize a lighter aluminum rack; VEVOR's TD-1004-04-02 aluminum carrier weighs 38.6 pounds.

Choose this for a heavier motorcycle and a 2-inch receiver setup that meets the stated installation-height range. Its 61.7-pound steel carrier is a meaningful handling consideration before and after use.

Listed on Amazon as: VEVOR Motorcycle Carrier, 600 LBS Steel Motorcycle Carrier Hitch Mount with 47" Longer Ramp, Scooter Dirt Bike Trailer Hauler with Ratchet Straps and Stabilizer, for Car, Truck with 2" Hitch Receiver

#3 · Best Tilting Design

3. Mockins Tilting Carrier

• Load Capacity: 500 lb
• Material: Steel
• dimensions: 83 x 6 x 8 in
• Compatible with Vehicle Type: Car, Truck, Van

Best for: Tilting ramp for wider tires.

Why it ranks #3: The 500-pound steel carrier has an 83-inch frame, tilting ramp, and tire fit up to 5.5 inches; its listed kit includes straps, stabilizer, and hitch lock.

A tilting ramp and an 83-inch frame give the Mockins carrier a distinctive loading arrangement for motorcycles, scooters, and e-bikes with tires up to 5.5 inches wide. The steel rack supports up to 500 pounds and fits 2-inch receivers, with straps and hitch hardware included.

The tilting ramp is intended to make mounting and dismounting easier, while the 83-by-6-inch frame provides a long track for loading. Its stated 5.5-inch tire-width limit helps buyers assess fit for fat-tire bikes before choosing the carrier. The included hitch stabilizer and hitch lock address connection setup, and four ratchet straps plus four loop straps give the buyer multiple supplied tie-downs for securing the bike.

Skip it if you have tires wider than 5.5 inches; this carrier's listed maximum tire width will not accommodate them.

Consider this for a motorcycle, scooter, or e-bike that fits the 5.5-inch tire limit and weighs no more than 500 pounds. The tilting ramp and included securing hardware suit a complete hitch-carrier setup.

Listed on Amazon as: Mockins 83" Tilting Motorcycle Hitch Carrier with Ramp w/ 500 Lbs. Capacity

#4

4. IRONMAX Steel Carrier

• Load Capacity: 600 lb
• Material: Alloy Steel
• dimensions: 79 x 31 x 10 in
• Compatible with Vehicle Type: Truck

Best for: Rain-ready steel hauling.

Why it ranks #4: Its alloy-steel construction and 600-pound rating suit heavier bikes, while the included loading ramp and two fixing straps add useful transport equipment.

Carbon steel with an anti-rust black coating gives the IRONMAX carrier a weather-focused steel setup for hauling loads up to 600 pounds. It includes a loading ramp and two fixing straps, and its specifications list truck compatibility for the hitch-mounted rack.

The alloy-steel construction and anti-rust coating are specified for strength and use in rainy conditions, supporting buyers who transport bikes in varied weather. A 600-pound capacity covers scooters, street bikes, dirt bikes, and e-bikes within that limit. The included ramp and two fixing straps provide core loading and securing components, while the 98-pound carrier weight is worth factoring into installation and storage handling.

Skip it if you want a lighter rack to handle; the VEVOR TD-1004-04-02 aluminum carrier weighs 38.6 pounds and holds up to 400 pounds.

This is for truck owners hauling a compatible bike up to 600 pounds who want a coated steel carrier with ramp and straps included. Account for its 98-pound weight when handling the rack.

Listed on Amazon as: IRONMAX 600LBS Heavy Duty Steel Motorcycle Carrier with Loading Ramp

#5

5. ECOTRIC 600 Carrier

• Load Capacity: 600 lb
• Material: steel
• Compatible with Vehicle Type: Dirt Motorcycle

Best for: Rust-resistant heavy-bike hauling.

Why it ranks #5: This steel carrier has a 600-pound capacity and a rustproof coating, making it a straightforward high-capacity option for dirt motorcycles.

A 600-pound capacity paired with a rustproof coating gives this ECOTRIC steel carrier a clear role for riders hauling heavier motorcycles in wet-weather conditions. It is listed for dirt motorcycles and comes as a motorcycle carrier mount, with no ramp or tie-down accessories listed in the supplied specifications.

The steel construction provides the carrier’s stated strength and toughness for holding a bike firmly, while its rustproof coating addresses exposure when riding or transporting in rain. A 600-pound maximum load expands the range of motorcycle weights it can support compared with lower-capacity racks. Since the supplied included-components list names only the carrier mount, buyers should plan their loading and tie-down workflow around the listed contents rather than assuming additional accessories are part of the package.

Skip it if you need a supplied loading ramp; the Mockins 73-inch carrier includes an integrated 47-inch ramp.

This suits dirt-motorcycle owners seeking a coated steel rack with a 600-pound rating. The supplied components list names the carrier mount only, so it is not the choice for a ready-to-load ramp package.

Listed on Amazon as: ECOTRIC 600LBS Black Motorcycle Carrier Mount Dirt Bike Rack Hitch Hauler |

#6

6. Goplus Steel Carrier

• Load Capacity: 600 lb
• Material: Steel
• Compatible with Vehicle Type: vehicle with 2" receiver

Best for: Wide-tire steel transport.

Why it ranks #6: Its steel construction and 600-pound capacity accommodate tires up to 7.5 inches wide, though the listed recommendation is not to exceed 55 mph.

A listed tire fit up to 7.5 inches wide and a 600-pound capacity make the Goplus carrier relevant to riders transporting heavier, wide-tire motorcycles. Its steel construction and loading ramp form a hitch-mounted setup for vehicles with a 2-inch receiver.

The steel frame is described as high-strength and tough, with protection against rust in rain, giving riders a rack specified for outdoor transport conditions. Its 600-pound rating provides the load boundary, while the stated fit for tires up to 7.5 inches wide helps assess wheel compatibility. The product recommends not exceeding 55 mph when carrying a motorcycle, so its operating guidance is an important part of trip planning.

Skip it if you need to travel above the stated 55 mph recommendation while carrying a motorcycle; this carrier's guidance sets that boundary.

This suits riders whose motorcycle fits the 7.5-inch tire limit and 600-pound rating on a 2-inch receiver. Its stated 55 mph recommendation should shape the intended transport route and pace.

Listed on Amazon as: Goplus Motorcycle Hitch Carrier, 600LBS Motorcycle Carrier Hitch Mount with 2 Straps, Loading Ramp, Dirt Bike Trailer, Heavy Duty Motor Cycle Rack, Fit Up to 7.5” Wide Tire

#7

7. ECOTRIC AI-318 Carrier

• Load Capacity: 500 lb
• Material: Steel
• dimensions: 75.91 x 32.24 x 9.06 in
• Compatible with Vehicle Type: Vehicle with 2" square receiver (class II…

Best for: Broad receiver-class compatibility.

Why it ranks #7: The steel carrier is rated for 500 pounds and states compatibility with 2-inch Class II through V receivers, with loading possible from either side.

Compatibility with Class II, III, IV, or V 2-inch square receivers sets the ECOTRIC carrier apart for buyers whose vehicle has a compatible hitch across those classes. Its 500-pound capacity and included ramp provide a loading-and-hauling setup for motorcycle transport without requiring a listed trailer.

The ramp supports loading a bike onto the steel frame, and the product specifies loading from either side, giving users flexibility around the vehicle and available space. Its 500-pound capacity establishes the upper load boundary, while the stated fit across four hitch classes can accommodate a wider range of compatible 2-inch receiver setups. The package includes mounting hardware and installation instructions, supporting assembly without needing to source those listed items separately.

Skip it if you need a 600-pound rating; the VEVOR TD-1004-03 steel carrier lists that higher capacity.

This is a practical option for riders with a compatible 2-inch receiver who want side-choice loading and a 500-pound limit. Check that the bike stays within that stated capacity.

Listed on Amazon as: ECOTRIC 500LB Hitch Mount Motorcycle Carrier Transportation Racks Hitch

#8

8. Mockins 73-inch Carrier

• Load Capacity: 500 lb
• Material: Steel
• dimensions: 73.5 x 31.5 x 5.5 in
• Compatible with Vehicle Type: Dirt Motorcycle, Truck

Best for: One-person ramp loading.

Why it ranks #8: Its 500-pound steel frame includes a 47-inch ramp, stabilizer, and tie-down straps; the listed tire fit reaches 5.5 inches.

Its integrated 47-inch ramp is the key convenience for riders loading without heavy lifting, while the 500-pound steel carrier accommodates tires up to 5.5 inches wide. The Mockins rack includes a hitch stabilizer, four loop straps, and four ratchet straps for securing the bike.

The 73-inch carrier track pairs with the 47-inch ramp to create a loading path that the product describes for easy one-person loading. Its 5.5-inch tire-width limit helps clarify compatibility for fat-tire and dual-sport wheels, and the 500-pound rating sets the maximum supported load. Four ratchet straps and four loop straps are supplied alongside a hitch stabilizer, allowing buyers to address both bike tie-down and rack connection with included components.

Skip it if you need more than 500 pounds of capacity; the VEVOR TD-1004-03 steel carrier is rated for 600 pounds.

Pick this for solo loading of a compatible dirt bike, e-bike, or scooter weighing no more than 500 pounds. Its 5.5-inch tire-width ceiling remains the key fit boundary.

Listed on Amazon as: Mockins 500 Lbs. Capacity 73" Motorcycle Hitch Carrier with Loading Ramp

#9 · Lightest Listed Carrier

9. VEVOR Aluminum Carrier

• Load Capacity: 400 lb
• Material: Aluminum
• dimensions: 74.88 x 31.73 x 4.13 in
• Compatible with Vehicle Type: Car

Best for: Lightweight aluminum rack.

Why it ranks #9: At 38.6 pounds, it is the lightest carrier with a stated weight here; its aluminum frame, 47-inch ramp, and 400-pound capacity suit lighter bikes.

At 38.6 pounds, this VEVOR aluminum carrier is lighter than many steel options while supporting loads up to 400 pounds. Its 47-inch loading ramp and 74.88-by-31.73-inch dimensions offer a compact hitch-mounted transport setup for motorcycles, scooters, and e-bikes.

The aluminum construction keeps the carrier’s listed weight to 38.6 pounds, which can make handling the rack itself easier than a heavier carrier. Anodizing is specified to improve corrosion and wear resistance for outdoor use, while the 400-pound capacity defines which bikes can be transported. The 47-inch ramp provides the loading route, and the included accessory kit accompanies the carrier; buyers should keep the capacity limit in view when selecting a motorcycle.

Skip it if you need to haul more than 400 pounds; the VEVOR TD-1004-03 steel carrier has a 600-pound rating.

Choose this when lower rack weight and aluminum construction matter for a car-based setup, and the bike is within 400 pounds. Its 47-inch ramp supports loading, but capacity is the firm boundary.

Listed on Amazon as: VEVOR Motorcycle Carrier, Aluminum Hitch Mount Rack with 47in Loading Ramp

#10

10. Black Widow AMC-400

• Load Capacity: 400 lb
• Material: Aluminum
• Compatible with Vehicle Type: Motorcycle

Best for: Compact loading for e-bikes.

Why it ranks #10: This aluminum carrier weighs less than the listed 98-pound steel models and includes a ramp and anti-tilt device, but its capacity is 400 pounds.

The ramp stores flat against the carrier and can be installed on either side, giving riders a choice of loading approach while keeping the setup compact between trips. Black Widow’s aluminum hitch carrier supports loads up to 400 pounds and fits Class III or IV 2-inch receivers.

The roll-on, roll-off ramp makes loading and unloading a motorcycle, e-bike, or fat-tire bike possible without a separate bulky trailer. Because the ramp secures flat against the carrier when unused, it stays with the rack rather than needing separate storage. The included anti-rattle device minimizes movement during transport, while the aluminum construction keeps this 400-pound-capacity carrier focused on lighter loads. A youth bike spacer adapter bar is also included for compatible bike setups.

Skip it if you need to haul a motorcycle heavier than 400 pounds; this carrier's stated capacity sets a firm limit.

This suits riders transporting an e-bike, fat-tire bike, or lighter motorcycle on a Class III or IV 2-inch receiver. Its 400-pound ceiling makes it a poor match for heavier machines.

Listed on Amazon as: Black Widow Aluminum Motorcycle Hitch Carrier with Ramp for eBike, 400 lb