A strong choice for semi-truck work combines a clearly stated load rating with a height and design suited to the truck or trailer being supported. The ESCO 20 Ton Swivel Screw Jack Stand leads this roundup for commercial truck use, with a stated 40,000-pound capacity per stand and infinitely adjustable height from 16.5 to 26.5 inches. The products here cover several distinct jobs: paired pin-type stands, a screw-adjustable stand, tall support stands, and a dedicated semi-trailer stabilizing pair.
Their capacity figures are not always directly comparable: some apply per stand, some across a pair, and the Mytee listing distinguishes static capacity from lift capacity. Check those distinctions, along with support height and vehicle compatibility, before choosing.
The ESCO 20 Ton Swivel Screw Jack Stand is the strongest all-around fit in this selection for commercial truck and trailer support. Its listed 40,000-pound capacity is per stand, and its screw mechanism adjusts continuously from 16.5 to 26.5 inches, rather than relying on fixed pin positions. For a semi-trailer needing stabilization rather than a conventional vehicle lift stand, the Mytee Products Semi Trailer Stand offers a 50,000-pound static capacity for the pair, but its listed lift capacity is 5,000 pounds.
Our Top Picks
Best OverallIts 40,000-pound capacity is listed per stand, and the screw adjustment provides continuous height selection from 16.5 to 26.5 inches for truck and trailer work.
View on Amazon
Best Trailer StabilizerSpecifically described as a semi-trailer stabilizing pair, it lists 50,000 pounds static capacity, a 5,000-pound lift capacity, and a 44–51-inch service range.
View on Amazon
Best Pin-Type PairThe matched pair supports 22 tons, or 44,000 pounds across the pair, and offers pin adjustment from 11.8 to 19.7 inches for trucks and trailers.
View on Amazon- Highest Pair Capacity Maxsa 22 Ton Stands
- Best High-Height Pair Sunex 1410 High Stands
Compare stand types, capacities, and support ranges
| # | Product | Load Capacity | Material | Compatible with Vehicle Type | Buy |
|---|---|---|---|---|---|
| 1 | 1. ESCO 20 Ton Screw StandBest Overall | 40000 lb | Alloy Steel | ATV, Bus, RV, Trailer, Truck | View on Amazon |
| 2 | 2. Mytee Semi Trailer StandBest Trailer Stabilizer | 5000 lb | Steel | Trailer | View on Amazon |
| 3 | 3. Sunex 1522A 22-Ton StandsBest Pin-Type Pair | 22 tons | Steel | Trailer, Truck | View on Amazon |
| 4 | 4. Maxsa 22 Ton StandsHighest Pair Capacity | 22 ton | — | Truck | View on Amazon |
| 5 | 5. Garvee 22 Ton StandsWelded-steel heavy-truck support | 22 tons | — | Truck | View on Amazon |
| 6 | 6. PRUNkuar 22 Ton StandsMulti-vehicle pin-adjustable pair | 22 tons | Alloy Steel | Car | View on Amazon |
| 7 | 7. BESTOOL 16 Ton StandHigh-clearance truck positioning | 35,000 lbs | Steel | Truck | View on Amazon |
| 8 | 8. Maxority 10 Ton StandsPin-adjusted truck and equipment support | 1E+1 tons (20,000 lbs) | Metal | Truck, Car, Other Heavy Equipment | View on Amazon |
| 9 | 9. Sunex 1410 High StandsBest High-Height Pair | 10 tons | Metal | Trailer, Truck | View on Amazon |
| 10 | 10. BIG RED T90070 StandsLow-profile truck and equipment pair | 10 ton | Alloy Steel | Car | View on Amazon |
Detailed Reviews: Best Jack Stands For Semi Trucks

#1 · Best Overall
1. ESCO 20 Ton Screw Stand
- Load Capacity: 40000 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: ATV, Bus, RV, Trailer, Truck
Best for: Fine-height commercial truck support.
Why it ranks #1: Its 40,000-pound capacity is listed per stand, and the screw adjustment provides continuous height selection from 16.5 to 26.5 inches for truck and trailer work.
The ESCO 10802 supports 40,000 pounds per stand and uses a swivel screw mechanism for infinite height control from 16.5 to 26.5 inches. That continuous adjustment enables precise support-height setting for commercial trucks, trailers, RVs, and equipment without being limited to fixed pin positions.
The 20-ton-per-stand rating is specified for commercial truck support, trailer stabilization, and heavy-equipment service. Its built-in screw mechanism provides infinite adjustment across the 16.5-to-26.5-inch range, so operators can set the support height to the desired position rather than choose among fixed slots. The swivel-style stand and wide steel base support its heavy-duty service role. The range is lower than high-height trailer stands, making it important to match the stand to the required support point.
- 40,000-pound capacity per stand
- Infinite screw height adjustment
- 16.5-to-26.5-inch range
- Compatible with trucks, trailers, RVs, and equipment
- Its 26.5-inch maximum height does not reach high-height support points.
Skip it if you need support above 26.5 inches; the Sunex Tools 1410 reaches 46.5 inches for elevated truck or trailer work.
This ESCO suits fleet and industrial buyers who value exact height setting within a 16.5-to-26.5-inch range. Choose it for controlled screw adjustment, but not when the job requires a higher support position.
Full product details
| Brand | ESCO |
|---|---|
| Color | Factory |
| Compatible with Vehicle Type | ATV, Bus, RV, Trailer, Truck |
| Included Components | 10802 |
| Item Dimensions | 19 x 15 x 15 inches |
| Item Weight | 28.03 kg |
| Load Capacity | 40000 pounds |
| Manufacturer | ESCO – EQUIPMENT SUPPLY COMPANY |
| Part Number | 10802 |
| Material | Alloy Steel |
| Model Number | 10802 |
| Style Name | scissor |

#2 · Best Trailer Stabilizer
2. Mytee Semi Trailer Stand
- Load Capacity: 5000 lb
- Material: Steel
- Compatible with Vehicle Type: Trailer
Best for: Semi-trailer stabilization pair.
Why it ranks #2: Specifically described as a semi-trailer stabilizing pair, it lists 50,000 pounds static capacity, a 5,000-pound lift capacity, and a 44–51-inch service range.
A 50,000-pound static capacity across the two stands makes this Mytee Products set specifically relevant to semi-trailer stabilization. Its 44-to-51-inch service range provides elevated support positioning, while the 5,000-pound lift capacity distinguishes its lifting rating from its much higher static-load figure.
The pair is listed for trailer use, with a 13.5-inch-diameter base plate supporting its ground-contact footprint. The 44-to-51-inch service range suits elevated trailer stabilization, and the stated 50,000-pound static capacity applies to the two-pack. Buyers should distinguish that static figure from the 5,000-pound lift capacity: the product's specifications give separate numbers for those functions. Steel construction and the no-wheel listing also matter when planning placement and movement around a trailer.
- 50,000-pound static capacity for the pair
- 44-to-51-inch service range
- 13.5-inch-diameter base plate
- Trailer-specific compatibility
- Lift capacity is 5,000 pounds, far below its 50,000-pound static capacity.
Skip it if you need a stand with a 22-ton lifting rating; the Maxsa Innovations 22-ton pair is listed for heavy truck support.
For semi-trailer users seeking elevated stabilization, this pair offers a 44-to-51-inch service range and 50,000-pound static capacity. Keep its separate 5,000-pound lift rating in view when deciding whether it suits the task.
Full product details
| Brand | Mytee Products |
|---|---|
| Color | Yellow,Red |
| Compatible with Vehicle Type | Trailer |
| Item Weight | 70 pounds |
| Load Capacity | 5000 pounds |
| Manufacturer | Mytee Products |
| Part Number | TSD-L5Kx2-AMZ |
| Material | Steel |
Listed on Amazon as: Mytee Products 2 Pack Semi Trailer Stabilizing Jack Stand 50,000 Lbs Static Capacity
View on Amazon
#3 · Best Pin-Type Pair
3. Sunex 1522A 22-Ton Stands
- Load Capacity: 22 tons
- Material: Steel
- Compatible with Vehicle Type: Trailer, Truck
Best for: Heavy-truck pair with height range.
Why it ranks #3: The matched pair supports 22 tons, or 44,000 pounds across the pair, and offers pin adjustment from 11.8 to 19.7 inches for trucks and trailers.
The Sunex Tools 1522A combines a 22-ton pair capacity with an 11.8-to-19.7-inch height range, giving heavy-vehicle service buyers defined support limits. Its pin-type adjustment enables positive height selection, while the matched pair supports balanced positioning during repair work on trucks or trailers.
The stated capacity is 44,000 pounds across the pair, a specification aimed at heavy-duty support rather than lighter maintenance alone. The 11.8-to-19.7-inch range helps buyers assess whether the stands can reach their needed support height before setting up. Pin-type adjustment provides positive height selection, and the matched-pair configuration supports balanced placement. Steel construction is suited to shop and garage service work; the listed vehicle compatibility specifically covers trucks and trailers.
- 44,000-pound capacity across the pair
- 11.8-to-19.7-inch height range
- Pin-type height selection
- Steel construction for truck and trailer service
- The maximum listed height is 19.7 inches, limiting reach for higher-clearance support needs.
Skip it if you need support above 19.7 inches; the Sunex Tools 1410 reaches 46.5 inches for high-height truck or trailer work.
This pair suits shop or garage buyers supporting trucks and trailers within its 11.8-to-19.7-inch range. Check that range against the required support point; its listed maximum will not serve jobs calling for taller stands.
Full product details
| Brand | Sunex Tools |
|---|---|
| Color | Red/Black |
| Compatible with Vehicle Type | Trailer, Truck |
| Included Components | Sunex 1522A 22-Ton Jack Stands, Pair |
| Item Dimensions | 10 x 13.8 x 15.75 inches |
| Item Weight | 13.61 g |
| Load Capacity | 22 tons |
| Manufacturer | Sunex International |
| Part Number | 1522A |
| Manufacturer Warranty Description | Manufacturer Warranty |
| Material | Steel |
| Model Number | 1522A |
| Style Name | 22 Ton |
Listed on Amazon as: SUNEX TOOLS 1522A 22-Ton Jack Stands, Pair
View on Amazon
#4 · Highest Pair Capacity
4. Maxsa 22 Ton Stands
- Load Capacity: 22 ton
- Compatible with Vehicle Type: Truck
Best for: Truck and bus pin-type pair.
Why it ranks #4: This truck-oriented pin-type pair lists support up to 48,000 pounds per pair and adjusts from 13 to 19.68 inches.
A 48,000-pound capacity across the pair gives the Maxsa Innovations stands a heavy-duty role for trucks, RVs, and buses. Pin-type adjustment covers 13 to 19.68 inches, enabling selection among multiple support heights for garage work while keeping the listed range clear for fit planning.
The pair rating and pin-style adjustment connect its heavy-load use to a defined 13-to-19.68-inch support window. That range helps mechanics compare the stands with a truck or bus support point before starting work, while multiple height settings allow repositioning within the range. The product is explicitly presented for commercial trucks, RVs, and buses, and the two-pack supports paired use. Its maximum height is a practical constraint for vehicles needing higher clearance.
- 48,000-pound capacity across the pair
- 13-to-19.68-inch height range
- Pin-type adjustment with multiple settings
- Listed for trucks, RVs, and buses
- The 19.68-inch maximum height limits use at higher support points.
Skip it if you need support above 19.68 inches; the ESCO 10802 adjusts up to 26.5 inches for trucks and trailers.
This pair fits mechanics supporting trucks, RVs, or buses when the required point falls within 13 to 19.68 inches. Its pin adjustment and pair capacity suit that range, but not higher-clearance support work.
Full product details
| Brand | Maxsa Innovations |
|---|---|
| Color | Red+Black |
| Compatible with Vehicle Type | Truck |
| Included Components | jack stand |
| Item Dimensions | 18.98 x 11.02 x 11.02 inches |
| Item Weight | 63.9 pounds |
| Load Capacity | 22 ton |
| Manufacturer | MAXSA |
| Part Number | bS0-npupZ6v5nLjWHWk-w-1MLbMa8 |
| Manufacturer Warranty Description | 30 days manufacturer |
| Model Number | bS0-npupZ6v5nLjWHWk-w-1MLbMa8 |
Listed on Amazon as: MAXSA 22 Ton Jack Stands Pin Type 13-19.68 Inch
View on Amazon
#5
5. Garvee 22 Ton Stands
- Load Capacity: 22 tons
- Compatible with Vehicle Type: Truck
Best for: Welded-steel heavy-truck support.
Why it ranks #5: The listing specifies a 22-ton capacity, a pair, and truck compatibility, with an all-steel frame intended for heavy-vehicle support.
Garvee pairs a 22-ton rating with a professionally welded, all-steel frame for supporting heavy trucks and RVs during serious repair work. Its quick-release, one-handed height adjustment is presented as a workflow aid, letting users change stand height without a two-handed adjustment process.
The stated 22-ton capacity and welded steel frame address heavy-load support, with the frame construction intended to resist bending under its rated load. For busy repair work, the quick-release mechanism enables one-handed height adjustment, which can simplify positioning while handling a stand. The product is supplied as a two-pack, and its listed compatibility is trucks. A specific height range is not included in the supplied details, so buyers cannot compare reach from those facts alone.
- 22-ton capacity
- Professionally welded all-steel frame
- Quick-release, one-handed height adjustment
- Two-pack configuration
- No specific adjustment-height range is provided.
Skip it if you need a stated support-height range before selecting stands; the Sunex Tools 1522A lists an 11.8-to-19.7-inch range.
This pair suits truck and RV repair buyers prioritizing a welded steel frame and one-handed quick-release adjustment. Because the supplied details give no height range, it is a weaker fit when reach must be verified in advance.
Full product details
| Brand | Garvee |
|---|---|
| Color | Blue+Black |
| Compatible with Vehicle Type | Truck |
| Included Components | jack stand |
| Item Dimensions | 18.89 x 11.02 x 11.02 inches |
| Item Weight | 60.6 pounds |
| Load Capacity | 22 tons |
| Manufacturer | Garvee |
| Part Number | bVv-npluZ6vw-UTXgwQfY-lbSbJK8 |
| Manufacturer Warranty Description | 30 days manufacturer |
| Model Number | 37079y1wKmtiSPN4iQ-9swn9Z |
Listed on Amazon as: Garvee 22 Ton Jack Stands, 2 Pack, Pin Type
View on Amazon
#6
6. PRUNkuar 22 Ton Stands
- Load Capacity: 22 tons
- Material: Alloy Steel
- Compatible with Vehicle Type: Car
Best for: Multi-vehicle pin-adjustable pair.
Why it ranks #6: These alloy-steel pin stands are listed for trucks and trailers, with 22-ton capacity and three adjustment slots spaced at three-inch intervals.
A secured steel adjustment pin and 22-ton capacity make the PRUNkuar pair a practical option for varied fleet and equipment settings. Its height positions span 11 13/16 to 19 3/4 inches, while compatibility extends across trucks, trailers, cars, SUVs, ATVs, UTVs, and equipment.
The alloy-steel frame and 44,000-pound pair rating provide the stated heavy-duty support foundation for garage, agricultural, industrial, and construction environments. Three pin slots in three-inch intervals make the available height choices clear, and the attached pin helps prevent it from being lost between adjustments. The listed height range lets buyers compare the stand against their support needs, while the broad vehicle list makes it useful where fleets include more than semis.
- 22-ton capacity
- Attached steel adjustment pin
- Three height slots at three-inch intervals
- Listed for trucks, trailers, SUVs, ATVs, UTVs, and equipment
- Three-inch slot intervals offer fewer fine height choices than continuous screw adjustment.
Skip it if you require continuous fine height control; the ESCO 10802 uses a screw mechanism with infinite adjustment within its listed range.
Choose this pair for mixed-vehicle garages or industrial settings that can work within its three pin positions and 11 13/16-to-19 3/4-inch range. It is less suited to jobs requiring incremental height control between those slots.
Full product details
| Brand | PRUNkuar |
|---|---|
| Color | red |
| Compatible with Vehicle Type | Car |
| Included Components | Jack Stands |
| Item Dimensions | 16.54 x 12.6 x 15.35 inches |
| Item Weight | 32 kg |
| Load Capacity | 22 tons |
| Manufacturer | PRUNkuar |
| Part Number | JX104-RD |
| Manufacturer Warranty Description | 180 Days |
| Material | Alloy Steel |
| Model Number | JX104-RD |
| Style Name | strong; sturdy |
Listed on Amazon as: 22 Ton Heavy Duty Pin Type Professional Car Jack Stands, 1 Pair
View on Amazon
#7
7. BESTOOL 16 Ton Stand
- Load Capacity: 35,000 lbs
- Material: Steel
- Compatible with Vehicle Type: Truck
Best for: High-clearance truck positioning.
Why it ranks #7: Its 35,000-pound rating and 26–40.9-inch height range suit high-clearance trucks, though this is a single stand rather than a pair.
A 26-to-40.9-inch adjustment range gives the BESTOOL stand the reach needed for high-clearance trucks and heavy equipment. Its 35,000-pound rating, wide triangular base, and built-in wheels combine substantial stated capacity with easier positioning, while clear height markings support quick adjustment.
The steel stand is rated for 35,000 pounds and uses a wide triangular base for stable support under heavy loads. Its unusually tall listed range, from 26 to 40.9 inches, helps accommodate high-clearance vehicles and equipment that need support well above ordinary low-profile heights. Clear markings make height selection easier to read, and built-in wheels help move and position the stand. It is sold as one stand, so a buyer needing a pair must account for that configuration.
- 35,000-pound capacity
- 26-to-40.9-inch adjustable height
- Wide triangular base
- Built-in wheels and clear height markings
- Sold as one stand, not a pair.
Skip it if you need a matched pair in one pack; the Sunex Tools 1522A is supplied as a pair for truck and trailer support.
For truck or equipment users needing a single mobile stand with a tall 26-to-40.9-inch range, BESTOOL offers clear adjustment markings and wheels. Its one-stand configuration is the key boundary for buyers planning paired support.
Full product details
| Brand | BESTOOL PROFESSIONAL GARAGE TOOLS & EQUIPMENT |
|---|---|
| Compatible with Vehicle Type | Truck |
| Included Components | NO |
| Load Capacity | 35,000 lbs |
| Manufacturer | BESTOOL |
| Part Number | QJDZJ016 |
| Manufacturer Warranty Description | 1-2Year |
| Material | Steel |
| Model Number | QJDZJ016 |
| Style Name | heavy duty jack stands |
Listed on Amazon as: BESTOOL 16 Ton Heavy Duty Jack Stands for Trucks, Trailers, 1 Pack
View on Amazon
#8
8. Maxority 10 Ton Stands
- Load Capacity: 1E+1 tons (20,000 lbs)
- Material: Metal
- Compatible with Vehicle Type: Truck, Car, Other Heavy Equipment
Best for: Pin-adjusted truck and equipment support.
Why it ranks #8: The pair is listed for trucks and heavy equipment with a 20,000-pound capacity and pin adjustment, but its capacity is lower than higher-ranked options.
A 20,000-pound rating and pin-type height adjustment give the Maxority pair a clear role in supporting trucks and heavy equipment during repairs. The pin mechanism enables quick, precise height selection, while compatibility also includes cars and other heavy equipment for mixed-use maintenance work.
The 10-ton capacity suits substantial vehicle and equipment support, and the metal construction provides the material basis for workshop use. Pin-type adjustment lets the operator select a support height rather than rely on a fixed stand position, which helps accommodate different vehicles and machinery. The pair configuration supplies two stands for a support setup. Its medium-profile designation points toward applications that do not require the very tall working range of high-height stands.
- 20,000-pound capacity
- Pin-type adjustable height
- Pair configuration
- Compatible with trucks, cars, and other heavy equipment
- No specific minimum or maximum height is supplied.
Skip it if you need a stated height range or high-clearance support; the Sunex Tools 1410 lists a 28.1-to-46.5-inch range.
For truck owners and mechanics needing a pin-adjustable pair for repairs or maintenance, the Maxority offers a 20,000-pound rating and broad equipment compatibility. Its medium-profile positioning may not suit work requiring a specified tall support height.
Full product details
| Brand | Maxority |
|---|---|
| Color | Red |
| Compatible with Vehicle Type | Truck, Car, Other Heavy Equipment |
| Included Components | Jack stands |
| Item Weight | 35.6 kg |
| Load Capacity | 1E+1 tons (20,000 lbs) |
| Manufacturer | Maxority |
| Part Number | MAX200310TH-MAIN |
| Manufacturer Warranty Description | 90 Days Limited Warranty |
| Material | Metal |
| Model Number | MAX20031-10S2P |
Listed on Amazon as: 10 Ton (20,000 lbs) Capacity Heavy-Duty Medium Profile Pin Type Adjustable Jack Stand for Trucks & Equipment, 1 Pair
View on Amazon
#9 · Best High-Height Pair
9. Sunex 1410 High Stands
- Load Capacity: 10 tons
- Material: Metal
- Compatible with Vehicle Type: Trailer, Truck
Best for: Elevated truck and trailer support.
Why it ranks #9: Its 10-ton pair rating is lower than heavy-duty alternatives, but the 28.1–46.5-inch range and truck compatibility suit jobs needing elevated support.
The Sunex Tools 1410 reaches 46.5 inches, giving truck and trailer service buyers a high-height pair for elevated support work. Its 10 height intervals in two-inch increments provide defined pin positions across a 28.1-to-46.5-inch range, with 20,000 pounds supported across the pair.
The high-height configuration addresses jobs needing support well above ordinary low-profile stands, and the listed range lets buyers assess the required reach. Ten intervals in two-inch increments make adjustment choices predictable, while the attached pins help prevent pin loss. A matched pair supports balanced positioning, and heavy-duty pipe construction is specified for strength and durability. The 20,000-pound capacity applies across the pair, so this stand's rating should be assessed accordingly for the intended truck or trailer support task.
- 28.1-to-46.5-inch height range
- Ten pin positions in two-inch increments
- 20,000-pound capacity across the pair
- Attached adjustment pins
- The pair's 20,000-pound total capacity is lower than 22-ton pairs.
Skip it if you need a 22-ton pair rating; the SUNEX Tools 1522A supports 44,000 pounds across its pair for heavy truck work.
This pair suits truck and trailer operators needing high support positions and predictable two-inch pin increments. Its 20,000-pound capacity is across the pair, so match that rating and the 28.1-to-46.5-inch range to the job.
Full product details
| Brand | Sunex Tools |
|---|---|
| Color | Red/Black |
| Compatible with Vehicle Type | Trailer, Truck |
| Included Components | Sunex Tools – 10 TON HIGH HEIGHT PIN TYPE JACK STA |
| Item Dimensions | 28.1 x 15.7 x 15.7 inches |
| Item Weight | 105 pounds |
| Load Capacity | 10 tons |
| Manufacturer | Sunex International |
| Part Number | SUN1410 |
| Manufacturer Warranty Description | Manufacturer Warranty |
| Material | Metal |
| Model Number | SUN1410 |
| Style Name | 10 Ton High |
Listed on Amazon as: Sunex 1410 10-Ton, High Height, Pin Type, Jack Stands, Pair
View on Amazon
#10
10. BIG RED T90070 Stands
- Load Capacity: 10 ton
- Material: Alloy Steel
- Compatible with Vehicle Type: Car
Best for: Low-profile truck and equipment pair.
Why it ranks #10: The pair has a 20,000-pound rating and 11–17.3-inch range, but its listed vehicle compatibility is car rather than truck or trailer.
A 12.2-inch-square wide foot base gives the BIG RED pair a broad support footprint for low-profile vehicle and equipment work. Its 10-ton capacity and 11-to-17.3-inch adjustable range suit jobs requiring a lower stand position, while forged steel and a welded frame provide the stated construction details.
The 20,000-pound rating and high-grade forged-steel, welded-frame construction target vehicle support after lifting. Height adjustment from 11 to 17.3 inches lets buyers check whether the stand reaches the intended support point, and the 12.2-by-12.2-inch base adds a wide footprint. A large saddle is also specified, measuring 5.1 by 3.1 inches. The pair includes two stands, making it a ready matched setup for compatible low-height applications.
- 20,000-pound capacity
- 11-to-17.3-inch adjustable height
- 12.2-by-12.2-inch wide foot base
- Forged-steel welded frame and two-stand pack
- The 17.3-inch maximum height is limiting for higher-clearance truck support.
Skip it if you need support above 17.3 inches; the Sunex Tools 1410 reaches 46.5 inches for elevated truck and trailer work.
For buyers needing a low-profile pair for trucks or equipment, BIG RED combines a broad base with an 11-to-17.3-inch range. Its limited maximum height makes it a poor match for elevated support points.
Full product details
| Brand | BIG RED |
|---|---|
| Color | Red/Black |
| Compatible with Vehicle Type | Car |
| Included Components | 2 Jack Stands, User Manual |
| Item Dimensions | 16.73 x 16.73 x 26.57 inches |
| Item Weight | 59.5 pounds |
| Load Capacity | 10 ton |
| Manufacturer | Torin |
| Part Number | T90070 |
| Manufacturer Warranty Description | Limited 1-year manufacturer warranty |
| Material | Alloy Steel |
| Model Number | T90070 |
| Style Name | Low Height, |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: BIG RED 10 Ton Heavy Duty Steel Jack Stands for Trucks & Equipment, Low Profile, 20000lb Capacity, 2 Pack
View on AmazonAvoid confusing lifting capacity with trailer support
Do not treat a trailer stand’s static capacity as its lifting capacity: the Mytee Products Semi Trailer Stand lists 50,000 pounds static capacity for the pair but only 5,000 pounds lift capacity. Those figures describe different functions, so the stand should not be selected as though it were a conventional lifting support rated at 50,000 pounds. The listing also gives a 44–51-inch service range, which points to a different use and height class than the ESCO 20 Ton Screw Stand’s 16.5–26.5-inch range.
Before buying, decide whether the job is holding a raised truck or stabilizing an uncoupled trailer, then verify the product’s stated capacity for that exact function. The product title and intended use matter as much as the largest number in the listing; a high static figure alone does not establish suitability for lifting.
Check the support height against the truck’s frame
A stand’s height range can make it unsuitable even when its capacity appears adequate. The Sunex 1410 High Stands adjust from 28.1 to 46.5 inches, while the low-profile BIG RED T90070 adjusts from 11 to 17.3 inches; neither range is interchangeable. The BESTOOL 16 Ton Stand covers 26 to 40.9 inches and is listed for trucks, but it is sold as one stand, so buyers must account for the number of supports needed.
Compare the required frame support point with both the stand’s minimum and maximum height, and confirm the contact area and placement guidance in the vehicle and stand manuals. A stand that reaches the needed height is not automatically compatible with every chassis.
These products provide different height configurations, making measurement before purchase especially important for high-clearance trucks and trailers.
How to Choose Semi-Truck Jack Stands
Capacity and how it is stated
Look for a rating that matches the support task and note whether it applies per stand or across a pair. The ESCO 20 Ton Screw Stand lists 40,000 pounds per stand; the Sunex 1522A lists 44,000 pounds across its pair, and Maxsa lists 48,000 pounds per pair. The Mytee Products Semi Trailer Stand separates 50,000 pounds of static capacity from 5,000 pounds of lift capacity, so those numbers cannot be treated as the same rating.
Compare like with like and use the vehicle or trailer manufacturer’s approved support points and load guidance. Buyers supporting a truck for service may favour an explicitly per-stand rating, while someone stabilizing an uncoupled trailer should prioritize a stand rated for that function.
Adjustment style and support height
Choose a height range that reaches the intended support point, then decide whether fixed pin positions or continuous adjustment better suits the job. The ESCO 20 Ton Screw Stand spans 16.5–26.5 inches with a screw mechanism; Sunex 1522A pin stands cover 11.8–19.7 inches, and Sunex 1410 High Stands extend from 28.1 to 46.5 inches. The BESTOOL 16 Ton Stand reaches 40.9 inches, while its stated minimum is 26 inches.
Pin stands offer selected positions, whereas the ESCO listing describes infinite height control. Lower ranges may fit lower support points; the taller products suit high-clearance applications only when their contact height and capacity also match the vehicle.
Pair, single stand, or stabilizer
Confirm how many stands are included and whether the product is meant to support a vehicle or stabilize a trailer. The Sunex 1522A and Sunex 1410 are listed as matched pairs, as are the Maxsa 22 Ton Stands and BIG RED T90070. By contrast, BESTOOL’s 16-ton listing is for one stand, and Mytee’s product is a pair specifically described as semi-trailer stabilizing jacks.
A single stand’s capacity does not provide a complete support setup by itself, and a trailer stabilizer is not automatically a substitute for ordinary service stands. Buyers assembling a matched truck-support setup may prefer a listed pair; those addressing uncoupled-trailer stability should consider the dedicated Mytee product and its separate static and lift ratings.
Which Jack Stands Fit Your Semi-Truck Job?
For general commercial truck or trailer support, choose the ESCO 20 Ton Screw Stand: it lists 40,000 pounds per stand and adjusts continuously from 16.5 to 26.5 inches. For an uncoupled semi-trailer that needs stabilizing, consider the Mytee Semi Trailer Stand, while keeping its 50,000-pound static rating distinct from its 5,000-pound lift capacity. If you need a pin-type pair, the Sunex 1522A 22-Ton Stands list 44,000 pounds across the pair; Maxsa 22 Ton Stands list 48,000 pounds per pair.
For higher support points, compare the Sunex 1410 High Stands and BESTOOL 16 Ton Stand, checking their different ranges and pair-versus-single packaging. Avoid choosing on capacity alone: verify the required height, support function, and vehicle compatibility.
Related Buying Guides
- Best Jack Stands For Trucks
- Best Jack And Jack Stands
- Best Car Jack And Stands
- Best Semi Truck Transmission Jack
- Best Motorcycle Jack Stand
- Best Jack And Stands Kit
Frequently Asked Questions
How should I calculate the required stand capacity for a semi truck or trailer?
Start with the vehicle’s weight and the portion that the stands must support for the specific task. Check whether a listed rating applies to one stand or a pair, and do not assume the load is shared evenly. Follow the vehicle and stand manufacturers’ instructions, and select compatible stands with adequate capacity.
Where are jack stands safe to position on a semi truck chassis?
Use only support points designated by the vehicle or trailer manufacturer for the load and job. Do not place stands under unsupported panels, axles, or components unless the manufacturer specifies those points. Work on firm, level ground, chock wheels as appropriate, and confirm each stand is stable before placing any load on it.
What is the difference between lifting a trailer and stabilizing it while uncoupled?
Lifting raises a trailer for service and requires stands rated and positioned for that lifting task. Stabilizing an uncoupled trailer supports it against movement or tipping while it is disconnected; a static capacity may describe that function, while a separate, lower lift capacity may apply. Check the product’s stated purpose and ratings.
What should I check before choosing a stand’s height range?
Confirm the support point’s required height for the job, including the clearance needed to position the stand. Compare that measurement with the stand’s listed adjustment range and verify compatibility with the vehicle. A stand’s maximum capacity does not ensure it will reach the needed height or suit the support task.
How can I compare capacity ratings listed for one stand versus a pair?
Read the packaging and product description to determine whether capacity is per stand or for the pair. Do not compare those figures as though they use the same basis, or assume a pair divides the load evenly. For example, the listed ESCO rating is per stand, while the Sunex 1522A rating is across the pair.
Final Words
For general commercial truck or trailer support, the ESCO 20 Ton Screw Stand is the strongest all-around fit here: it lists 40,000 pounds per stand and adjusts from 16.5 to 26.5 inches. For an uncoupled semi-trailer needing stabilization, consider the Mytee pair, distinguishing its 50,000-pound static rating from its 5,000-pound lift capacity. Before choosing, verify the required height, support function, rating basis, and vehicle compatibility.


