Best Motorcycle Jack Stand for Home Motorcycle Maintenance

#1 · Best Overall

1. OMT 1100lb Scissor Lift

• Dimensions: 1.57 x 10.24 x 4.33 in
• Weight: 12.8 kg
• Load Capacity: 1100 lb.
• Material: Rubber, Steel

Best for: Manual lift with included tools.

Why it ranks #1: Its 1100 lb capacity and 3.7–14.6-inch lift range suit many motorcycle maintenance jobs, and the package includes a safety bar, T-handle, and socket.

The Orion Motor Tech’s included safety bar, T-handle, and 3/8-inch socket give the 1,100-pound scissor jack a ready-to-use manual setup. It lifts from 3.7 to 14.6 inches, creating service clearance for cruisers, dirt bikes, and other motorcycles without requiring a separate lifting tool to turn the jack.

Use the T-handle for direct operation or pair the supplied 3/8-inch socket with a ratchet wrench to raise the stand through its 3.7-to-14.6-inch range. That height adjustment helps tailor access for maintenance, while the 1,100-pound capacity covers the listed cruiser and dirt-bike use cases. The safety bar is included for the lifted setup, and the maker recommends manual operation to extend screw life and prevent wear.

Skip it if you want hydraulic foot lifting; VIVOHOME’s VH049 uses a hydraulic foot-pedal system and supports up to 1,500 pounds.

Pick this Orion jack for manual motorcycle servicing when the included handle, socket, and safety bar suit your workflow. Its lift range is useful for varied repair access, but it is not a hydraulic pedal-operated stand.

Listed on Amazon as: OMT 1100lb Motorcycle Scissor Lift Jack Wide Deck Motorbike Hoist Stand

#2 · Best Wide-Deck Scissor Jack

2. VEVOR 1100 lb Scissor Lift

• Dimensions: 18.1 x 11 x 3.9 in
• Weight: 26 lb
• Load Capacity: 1100 lb
• Material: Steel

Best for: High-capacity garage maintenance.

Why it ranks #2: This steel center jack supports 1100 lb and is listed for street, cruiser, and adventure touring bikes, with a low 3.7-inch starting height.

The VEVOR’s 1,100-pound capacity is its defining advantage, letting riders lift street, cruiser, and adventure touring motorcycles for maintenance and cleaning. Its center scissor-jack format and crank operation suit a garage workflow where a compact steel stand can be positioned beneath the bike, then raised without relying on a hydraulic foot pedal.

A 3.7-to-13.8-inch lifting range gives access beneath the motorcycle for jobs that need more than ground-level clearance, while the wide deck supports the bike as the steel scissor mechanism rises. The included safety pin adds a locking step once lifted. At 26 pounds and without casters, it is a manual-positioning stand rather than a roll-around table, so plan to place it before raising the motorcycle.

Skip it if you need a wheeled hydraulic table; VEVOR’s 1,500-pound ZX0901-7B adds casters and foot operation.

Choose this VEVOR for garage maintenance on a street bike, cruiser, or touring motorcycle within its 1,100-pound capacity. Its crank lift and safety pin suit stationary work, but the lack of casters means positioning is manual.

Listed on Amazon as: VEVOR Motorcycle Lift, 1100 LBS Motorcycle Scissor Lift Jack with Wide Deck & Safety Pin, 3.7"-13.8" Center Hoist Crank Stand, Steel Scissor Jack for Street Bikes, Cruiser Bikes, Touring Motorcycles

#3 · Best Adjustable Scissor Jack

3. VIVOHOME 1100 lb Scissor Jack

• Dimensions: 14.6 x 9 x 3.5 in
• Weight: 12.5 kg
• Load Capacity: 1100 lb
• Material: Alloy Steel

Best for: Adjustable garage scissor jack.

Why it ranks #3: Its 1100 lb capacity and 3.5–14.5-inch range offer fine height adjustment, while adjustable screw adapters help balance the jack on uneven floors.

Adjustable screw adapters distinguish this VIVOHOME scissor jack, giving riders a way to improve balance on uneven floors while lifting a motorcycle or ATV. Its alloy-steel frame supports up to 1,100 pounds, and the 3.5-to-14.5-inch range allows height adjustment for engine, transmission, or wheel maintenance.

The reinforced crank handle operates the lift for controlled raising and lowering, while the screw adapters address balance when the floor is uneven. A 3.5-inch minimum height helps position the jack beneath a low-clearance vehicle, and its 14.5-inch maximum creates added access for the listed engine, transmission, and wheel work. The 1,100-pound capacity and motorcycle-and-snowmobile compatibility make it a substantial manual stand, but height remains capped at 14.5 inches.

Skip it if you need a lift above 14.5 inches; VEVOR’s Hydraulic Motorcycle Lift Jack Table reaches 36 inches.

This VIVOHOME suits riders who want a manual scissor jack with adapter adjustment for uneven floors and access for routine maintenance. Its 14.5-inch maximum height is the boundary to weigh against the job.

Listed on Amazon as: VIVOHOME 1100 LBS Motorcycle Lift Scissor Jack, Wide Deck Hoist Stand, Red

#4

4. OMT Motorcycle Lift

• Dimensions: 17.32 x 10.24 x 4.33 in
• Weight: 28.4 lb
• Load Capacity: 1100 lb
• Material: 1045 Carbon Steel, CR-V, Plastic, Rubber

Best for: Tool-equipped motorcycle maintenance.

Why it ranks #4: This 1100 lb manual lift spans 3.7–14.6 inches and includes a safety bar, socket, gloves, and chain brush for motorcycle maintenance.

Orion Motor Tech includes a T-handle, 3/8-inch socket, safety bar, gloves, and chain brush with this 1,100-pound scissor jack. That accessory set supports a manual maintenance workflow, while the 3.7-to-14.6-inch lifting range provides adjustable clearance for dirt bikes, touring bikes, and cruisers.

The T-handle or supplied socket can turn the jack through its 3.7-to-14.6-inch range, so riders can select a working height for repairs without sourcing those tools separately. A safety bar is included for the raised setup, and the gloves and chain brush add task-related accessories to the package. Its 1,100-pound capacity and listed dirt-bike, touring, and cruiser compatibility suit varied motorcycle work. Manual operation is recommended to limit screw wear.

Skip it if you prefer pedal-operated hydraulic lifting; VEVOR’s 1,500-pound ZX0901-7B uses a foot-operated system and includes wheels.

Choose this Orion for manual servicing of a dirt bike, touring bike, or cruiser when the bundled tools and maintenance accessories are useful. Its 14.6-inch maximum lift and manual operation define the working limits.

Listed on Amazon as: OMT Motorcycle Lift, 1100lb Scissor Jack Stand for ATV Dirt Bike Cruiser

#5 · Best High-Capacity Hydraulic Lift

5. VEVOR 1500 lb Hydraulic Lift

• Dimensions: 33.1 x 16.1 x 4.7 in
• Weight: 58 lb
• Load Capacity: 1500 lb
• Material: Steel

Best for: Hydraulic lift for mixed vehicles.

Why it ranks #5: The 1500 lb capacity exceeds the manual jacks, and its foot-operated lift, wheels, ratchet belts, and three-position safety pin support varied garage tasks.

The VEVOR ZX0901-7B pairs a 1,500-pound capacity with foot-operated hydraulics, offering a mobile lifting option for motorcycles, ATVs, and UTVs. Four wheels support movement around the garage, while two ratchet belts and a three-position safety pin mechanism add practical securing and locking features to the lift setup.

A long handle and foot-operated hydraulic system support raising the platform without a crank, while four wheels help move the 58-pound lift into position. The 1,500-pound rating and broad listed vehicle compatibility suit standard motorcycles, touring bikes, cruisers, ATVs, and other powersports machines. Two ratchet belts provide a securing option, and the three-position safety pin mechanism offers selectable locking positions during raised work.

Skip it if you need a lighter manual jack; Orion Motor Tech’s FBA_OMT-MML-ZX09-08 scissor jack weighs 12.8 kilograms and uses a T-handle.

Choose this VEVOR for garage work across motorcycles, ATVs, or UTVs when hydraulic foot operation, wheels, and belts fit the workflow. Its 58-pound weight matters when moving the lift, even with its four wheels.

Listed on Amazon as: VEVOR Hydraulic Motorcycle Lift Jack 1500 LBS Capacity ATV Scissor Lift Jack Portable Motorcycle Lift Table with 4 Wheels Hydraulic Foot-Operated Hoist Stand for Motorcycle ATV UTV Powersports

#6

6. VIVOHOME 1500 lb Hydraulic Lift

• Dimensions: 14 x 27.5 x 15 in
• Weight: 59.4 lb
• Load Capacity: 1500 lb
• Material: Alloy Steel, Rubber

Best for: Hydraulic lift for heavier bikes.

Why it ranks #6: Its 1500 lb capacity and foot-pedal operation suit heavier compatible vehicles, but the stated 4.5-inch minimum clearance rules out some bikes.

A 1,500-pound capacity paired with foot-pedal hydraulics makes the VIVOHOME VH049 a strong match for riders lifting heavier motorcycles, dirt bikes, or ATVs. Its 4.5-to-14.8-inch adjustment supports access to tires, chains, forks, and undercarriage areas, while included straps add a securing option during lifting.

The hydraulic pedal system raises the lift without requiring a hand-cranked screw, helping riders bring a compatible vehicle into working position. Its stated 4.5-inch minimum clearance and 1,500-pound limit set clear vehicle boundaries, while the 14.8-inch maximum gives room for listed tire, chain, fork, and undercarriage service. Two straps are included, and the listed compatibility spans ATVs, cruisers, dirt bikes, scooters, sport bikes, and touring bikes when the clearance requirement is met.

Skip it if you ride a bike with full lower fairings; VEVOR’s ZX0901-7B is listed for standard motorcycles and has a 1,500-pound capacity.

The VH049 suits riders lifting compatible motorcycles or ATVs for undercarriage and wheel-area service, especially when pedal hydraulics and straps help the workflow. It requires at least 4.5 inches of clearance and does not suit full lower fairings.

Listed on Amazon as: VIVOHOME 1500 LBS Hydraulic Motorcycle Lift Jack

#7

7. VEVOR 350 lb Hydraulic Lift

• Dimensions: 19.1 x 18.5 x 15.8 in
• Weight: 63 lb
• Load Capacity: 350 lb
• Material: Steel

Best for: Low-profile dirt-bike lifting.

Why it ranks #7: The foot-operated lift reaches 36 inches and includes wheels and a J-hook, but its 350 lb capacity limits it to lighter compatible bikes and ATVs.

A 36-inch maximum lift height sets this VEVOR apart, raising compatible off-road motorcycles well above the ground for service access. Its hydraulic foot pedal lets riders lift without bending over to crank, while the 350-pound capacity and ATV-and-dirt-bike compatibility make it a focused choice for lighter machines rather than heavier touring motorcycles.

The 13.8-to-36-inch range provides a substantial height adjustment for off-road work, and the foot-operated hydraulic system keeps lifting hands-free for positioning or steadying the bike. A steel scissor structure and worm gear transmission support that lifting action, while four wheels let the 63-pound table be moved around the workspace. Its 350-pound load limit is the key constraint: check the bike’s weight against that figure before choosing it.

Skip it if you lift a bike over 350 pounds; VEVOR’s 1,500-pound ZX0901-7B has a much higher listed capacity.

This VEVOR fits riders servicing lighter dirt bikes or ATVs who value pedal lifting, wheel mobility, and extra height. Keep its 350-pound capacity in view; it is not the pick for heavier motorcycles.

Listed on Amazon as: VEVOR Hydraulic Motorcycle Lift Table, 350 lbs Capacity Motorcycle Scissor Jack Lift with Wide Deck, J-Hooks, 4 Wheels, Hydraulic Foot-Operated Jack Stand for ATV Dirt Bikes

#8

8. VEVOR Front Rear Combo Stand

• Dimensions: 22.1 x 19.1 x 5.3 in
• Weight: 20 lb
• Load Capacity: 850 lb
• Material: Steel

Best for: Front-and-rear paddock lifting.

Why it ranks #8: This paired front and rear wheel stand supports 850 lb and fits motorcycles with tire radii up to 13.8 inches, but it needs compatible wheel support points.

The VEVOR TD-003-05FR includes both front and rear stands, letting riders lift either end for motorcycle maintenance rather than buying a single-end setup. Its 850-pound capacity, steel construction, and compatibility with popular Yamaha, Kawasaki, Honda, and Suzuki motorcycles make it a versatile paddock-style choice within its stated tire-radius limit.

Separate front and rear stands support different lifting needs, while reinforced limit clips and precisely positioned bracket slots are specified to help keep the motorcycle stable during lifting. The heavy-duty steel construction complements the 850-pound rating for routine garage work. Compatibility is stated for most motorcycles from several major brands, with a tire radius within 13.8 inches; that dimension is the key boundary for riders assessing wheel fit.

Skip it if you need only a rear stand and a smaller radius limit; VEVOR’s RWS-UL rear stand lists compatibility up to 13.4 inches.

This VEVOR suits riders who want both front and rear lifting options for motorcycle maintenance. Check the 850-pound limit and 13.8-inch tire-radius boundary against the bike; the included two-stand arrangement is its defining use case.

Listed on Amazon as: vevor Motorcycle Stand Lift 850lbs Front Rear Combo Stand Lift Stand Front Wheel Fork Stands Rear U+L Fork Swingarm Spool Stands Compatible with Most Yamaha Honda Kawasaki Suzuki Motorcycles Black

#9

9. Jack Boss Rear Combo Stand

• Weight: 11.58 lb

Best for: Sport-bike wheel service.

Why it ranks #9: The 500 lb rear stand reaches 12.6 inches and includes U-shaped front and L-shaped rear supports, though its listed capacity is lower than several alternatives.

The Jack Boss package combines a front-fork stand with a rear L-shaped stand, enabling wheel lifting at both ends rather than relying on a single center jack. Its steel construction, four PP caster wheels, and 500-pound capacity make it a practical paddock-style option for sport-bike work where rolling the stands into place matters.

The supplied U-shaped front-fork piece and L-shaped rear stand offer two distinct lifting arrangements for wheel-service tasks. Four PP caster wheels add stability as the stand raises the motorcycle, and the stated 12.6-inch lift height defines the available elevation. Industrial-grade steel with a red powder-coated finish is specified for corrosion resistance and shape retention. The 500-pound capacity is an important limit when selecting it for a particular motorcycle.

Skip it if you need a center lift for a heavier bike; VEVOR’s M110201 scissor jack supports up to 1,100 pounds.

Choose the Jack Boss combo for sport-bike wheel work when front and rear stand options matter. It offers a 500-pound limit and 12.6-inch lift height, so account for those boundaries before choosing it.

Listed on Amazon as: Jack Boss Motorcycle Stand Rear Combo Wheel Lift Stand, 500Lbs Capacity,Swingarm Spool Paddock Stand for Sport Bike,Fit for Yamaha, for Honda, Suitable for Kawasaki Black

#10

10. VEVOR Rear Wheel Stand

• Weight: 11 lb

Best for: Rear-wheel stand for sport bikes.

Why it ranks #10: This steel rear stand supports 850 lb and fits tires up to 13.4 inches in radius, but it lifts only the rear wheel rather than the whole bike.

The VEVOR RWS-UL focuses on rear-wheel lifting, with U-plus-L fork swingarm spools and an 850-pound capacity for maintenance on compatible motorcycles. Its stated tire-radius limit is 13.4 inches, and sturdy casters help move the heavy-duty steel stand into position for rear-end service.

The U-plus-L fork swingarm arrangement supports use with the listed spool setup, while precision locking slots and sturdy casters contribute to positioning and support during rear-wheel maintenance. Heavy-duty steel is specified for resistance to wear, and the 850-pound capacity covers the listed load limit. Because this is a rear stand, its use is narrower than a front-and-rear combo: choose it when rear-wheel access is the task, not as a complete two-end stand set.

Skip it if you need front and rear lifting in one set; VEVOR’s TD-003-05FR includes both stands and supports tire radii within 13.8 inches.

Choose the RWS-UL for rear-wheel maintenance on a compatible motorcycle within its 850-pound capacity and 13.4-inch tire-radius limit. Its casters ease positioning, but front-wheel lifting requires a separate stand.

Listed on Amazon as: VEVOR Motorcycle Rear Wheel Stand, 850lbs/390kg Load Capacity Lift with U + L Fork Swingarm Spool, Heavy Duty Rear Wheel Stand Motorcycle Lift Jack Stands, for Suzuki Yamaha Honda Kawasaki, Black