Best Jack Stands For Camper: Compare Stabilizers and Supports

#1 · Best Overall

1. SHALL RV Stabilizer Jacks

• Dimensions: 6.9 x 7 x 14.9 in
• Weight: 8.5 lb
• Load Capacity: 7500 lb
• Material: Aluminum

Best for: Four-jack camper stabilizing kit.

Why it ranks #1: Four aluminum screw jacks adjust from 11 to 17 inches and list 7,500 pounds of support per jack; the product specifies stabilization only.

Each SHALL aluminum jack supports up to 7,500 pounds, giving a four-point setup a substantial stated capacity for a parked camper or travel trailer. Its screw adjustment spans 11 to 17 inches, helping you steady a trailer at varying support heights after parking and leveling.

The four-jack set and 11–17-inch screw adjustment make it possible to place supports at multiple points and tune their height for uneven ground. Aluminum construction keeps the listed set weight at 8.5 pounds, a practical consideration when carrying and positioning jacks at a campsite. SHALL specifies these for stabilization only, not lifting, so use them to reduce movement on an already supported, parked RV rather than as lifting equipment.

Skip it if you need lifting equipment or support above 17 inches; these jacks are specified for stabilization only and stop at 17 inches.

For camper owners seeking four adjustable aluminum stabilizers, the SHALL set suits parked trailers needing support within its 11–17-inch range. Keep its stated stabilization-only role in mind; it is not a substitute for lifting equipment or a lift-rated support.

Listed on Amazon as: SHALL RV Stabilizer Jacks, 4-Pack Heavy Duty Aluminum Jack Stands for Travel Trailer Camper, Single Support up to 7500 Lbs, RV Leveling Screw Jack with Spare Nuts & Pads, Adjustable from 11" to 17"

#2 · Best Pad Set

2. RV Stabilizer Jacks

• Dimensions: 6.14 x 6.14 x 11 in
• Weight: 7.6 lb
• Load Capacity: 7500 lb
• Material: Aluminum

Best for: Lower-clearance campsite stabilizing.

Why it ranks #2: This four-pack lists 7,500 pounds per jack, an 11-to-17-inch adjustment range, and included rubber pads for parked camper stabilization.

A smooth screw-style T-handle adjusts these aluminum stack jacks from 11 to 17 inches, giving owners of lower-clearance campers a way to tune support height after parking and leveling. Each jack is rated for 7,500 pounds, and the set includes four jacks with rubber pads.

The product specifically positions the jacks for use after the RV is already parked and leveled, when reducing side-to-side sway, floor bounce, and movement can help steady campsite activities. Its 11–17-inch range and T-handle provide a manual way to adjust support height, while the included rubber pads are part of the four-jack set. Compatibility lists campers, RVs, trailers, and vans, making this a broadly specified option within that height span.

Skip it if you need support beyond 17 inches; the Garvee RV Slide Out Support Jacks adjust from 21.1 to 49 inches for taller slide-out support points.

This set fits owners who want four padded aluminum stabilizers for a parked, leveled camper and support points between 11 and 17 inches. It is not the listed choice for taller slide-outs or height needs beyond that range.

Listed on Amazon as: RV Stabilizer Jacks 4 Pack, 7500 lbs Each, Aluminum Stack Jacks 11-17 in

#3 · Longest Warranty

3. WELLUCK Screw Jack Stands

• Dimensions: 6.2 x 6.2 x 11 in
• Weight: 6.8 lb
• Load Capacity: 6000 lb
• Material: Strong Aluminum Alloy

Best for: Four-point screw jack stability.

Why it ranks #3: Four aluminum screw stands adjust from 11 to 17 inches, list 6,000 pounds capacity, and include a stated 10-year warranty.

WELLUCK combines a cast-aluminum square base with thick-walled hollow carbon-steel struts, providing a specific mixed-material construction for its four-jack camper set. Each jack is rated for 6,000 pounds and adjusts from 11 to 17 inches for support across that height range.

WELLUCK says the set helps prevent vehicle movement and swaying, a practical goal for a parked RV, trailer, or camper. Its 11–17-inch screw-jack range lets users tune support height, while the aluminum base and carbon-steel struts balance the listed construction materials. The four-piece set weighs 6.8 pounds, a useful handling detail for positioning supports at the campsite. The product listing identifies stabilization and leveling, rather than a lifting application.

Skip it if you require a listed capacity above 6,000 pounds per jack; the SHALL RV Stabilizer Jacks specify up to 7,500 pounds per jack.

For a camper owner wanting four screw-adjustable supports with mixed aluminum and carbon-steel construction, WELLUCK covers the 11–17-inch range. Its stated 6,000-pound-per-jack capacity is the boundary to weigh against your support needs.

Listed on Amazon as: RV Stabilizers Jacks 4 Pack,Screw Jack Stands for RV Camper Travel Trailer Leveling,Aluminum,Single Support Up to 6000 Lbs, Adjustable from 11" to 17"

#4

4. PAULINN RV Stabilizer Jacks

• Dimensions: 6.2 x 6.2 x 11 in
• Weight: 6.9 lb
• Load Capacity: 6000 lb
• Material: Aluminum

Best for: Lightweight four-point stabilizing set.

Why it ranks #4: The four-pack weighs 6.9 pounds and adjusts from 11 to 17 inches; its aluminum jacks list 6,000 pounds capacity.

At 6.9 pounds for the listed set, PAULINN’s four aluminum stabilizer jacks are easy to carry to a campsite while adding support between an RV frame and the ground. Each is rated for 6,000 pounds and adjusts from 11 to 17 inches.

PAULINN describes these jacks as a way to minimize vibration from walking, running appliances, or wind gusts, making the set relevant to day-to-day comfort in a parked camper. Their 11–17-inch adjustment supports placement across different frame-to-ground gaps, while aluminum construction and the listed 6.9-pound weight ease handling. Compatibility includes RVs, trailers, campers, and cargo trailers, giving the four-pack broader stated vehicle coverage than an RV-only listing.

Skip it if you need a stated warranty; PAULINN lists none, while the OULEME 6500 lbs RV Camper Scissor Jack lists a two-year manufacturer warranty.

Choose this set if portability and support against campsite vibration matter across a camper, trailer, or cargo trailer. Its stated height range is 11–17 inches, so it is not the fit for support points outside that span.

Listed on Amazon as: PAULINN RV Stabilizer Jacks 4 Pack, Heavy Duty Aluminum Jack Stands for Travel Trailer Camper, Single Screw Jack Support up to 6000 Lbs, Adjustable from 11 inch to 17 inch

#5 · Highest Stack-Jack Capacity

5. OULEME Leveling Jacks

• Dimensions: 7 x 7 x 12.6 in
• Weight: 7 lb
• Load Capacity: 7900 lb
• Material: Aluminum

Best for: High-capacity aluminum stack jacks.

Why it ranks #5: These aluminum leveling and stabilizer jacks list 7,900 pounds capacity and a one-year warranty, though the supplied data omits adjustment details.

OULEME lists a 7,900-pound capacity for each of these four aluminum stack jacks, a strong stated rating for RV owners seeking compact campsite stabilization. The 7-pound set and 7-by-7-inch footprint offer manageable handling and a defined base size for positioning.

The four-piece count gives an RV owner multiple supports to place around a parked vehicle, while the aluminum construction and 7-pound listed weight make carrying the set more manageable. OULEME specifies a 7,900-pound load capacity and dimensions of 7 by 7 by 12.6 inches, useful details when planning storage and support placement. The listing calls them leveling and stabilizer jacks, but provides no adjustment range, so height requirements need particular attention.

Skip it if you need a stated adjustment range before choosing support height; the SHALL RV Stabilizer Jacks specify an 11–17-inch range.

This set suits RV owners prioritizing a stated 7,900-pound capacity in aluminum stack jacks and who can plan around the listed dimensions. The supplied information gives no height range, making that an important fit limitation.

Listed on Amazon as: 4PK RV Leveling & Stabilizer Jacks,7900 lbs Camper Stack Jack Stands

#6 · Tallest Stand Range

6. BESTOOL Tall Jack Stands

• Dimensions: 11.49 x 11.49 x 17.3 in
• Weight: 6.94 kg
• Load Capacity: 12000 lbs
• Material: Steel

Best for: Tall steel trailer stabilizers.

Why it ranks #6: The steel two-pack adjusts from 17.3 to 30 inches and lists 12,000 pounds capacity, suiting buyers who need taller trailer stands.

These BESTOOL steel stabilizers extend from 17.3 to 30 inches, offering a taller support range than short stack jacks for trailer owners. The two-piece set uses a welded frame connecting the bottom triangular structures, a construction detail the listing links to improved stability.

The 17.3–30-inch span can serve trailer support points above the range of shorter stabilizers, while the welded frame and triangular bases provide the stated structural approach to stability. Forged steel construction is listed alongside anti-rust and corrosion-resistant claims, relevant for repeated maintenance and storage considerations. The set includes two jacks and has a listed 12,000-pound load capacity. Compatibility is specified for trailers, so the supplied information does not establish fit for other vehicle types.

Skip it if you need four supports in one set; the OULEME 4PK RV Leveling & Stabilizer Jacks supplies four aluminum jacks.

This pair suits trailer owners needing steel stabilizers within a 17.3–30-inch range and a welded-frame base design. Its two-jack quantity and trailer-specific compatibility are important considerations when planning a full setup.

Listed on Amazon as: RV Stabilizer Jacks, Travel Trailer Tall Jack Stands, 17.3-30 Inch, 2 Pack

#7

7. OULEME Scissor Jack Kit

• Dimensions: 27.1 x 19.09 x 5 in
• Load Capacity: 6500 LBS
• Material: Alloy Steel

Best for: Wide-range scissor jack kit.

Why it ranks #7: This four-pack steel scissor-jack kit spans 4 to 24 inches and lists 6,500 pounds lifting capacity, with a crank and drill socket included.

A 4-to-24-inch adjustment range lets this OULEME alloy-steel scissor jack set span substantially different trailer support heights. The four-pack is rated at 6,500 pounds, and its included crank handle, drill socket, and mounting screws support both manual operation and an equipped installation.

The wide height range can accommodate varied trailer frames, while the extra-wide base plate is specified to improve stability under load. For operation, the kit includes a manual crank handle and a 3/4-inch drill socket, giving owners a choice between hand adjustment and drill-assisted raising. Sixteen mounting screws and an instruction manual are also included, so the kit provides specified installation hardware and guidance. Alloy-steel construction suits buyers seeking scissor-style supports rather than stack jacks.

Skip it if you need a taller 21–49-inch slide-out support; the Garvee RV Slide Out Support Jacks adjust from 21.1 to 49 inches.

Choose this kit if your RV or trailer needs scissor jacks spanning 4–24 inches and you value both crank and drill operation. Its stated 6,500-pound capacity and mounting approach remain key fit considerations.

Listed on Amazon as: 6500 lbs RV Camper Scissor Jack, 24" Trailer Leveling Stabilizer 4PK

#8

8. Garvee Slide-Out Supports

• Dimensions: 24.41 x 11.02 x 12.53 in
• Weight: 40 lb
• Load Capacity: 20000 lb
• Material: Alloy Steel

Best for: Drill-ready tall slide-out supports.

Why it ranks #8: Designed for RV slide-outs, this four-pack adjusts from 21.1 to 49 inches, lists 20,000 pounds capacity, and includes a crank and drill socket.

Garvee’s four slide-out supports adjust from 21.1 to 49 inches, providing a tall stated range for campers, travel trailers, and RVs. A power drill or hand crank can raise or lower them, and the package includes a crank handle and magnetic hex socket.

The 21.1–49-inch range gives owners flexibility across different slide-out support heights, while the quick-adjust design is intended to simplify raising and lowering. Switching between a power drill and hand crank can adapt the workflow to the tools available at camp. The included magnetic hex socket supports the drill option, and the flat top support block offers a specified contact surface. Alloy-steel construction and a 40-pound listed weight matter when planning storage and handling.

Skip it if you need a lighter, lower-profile stack-jack set; the PAULINN RV Stabilizer Jacks weigh 6.9 pounds and adjust from 11 to 17 inches.

For RV owners supporting taller slide-outs, this set combines a 21.1–49-inch range, flat tops, and drill or hand operation. Its 40-pound listed weight is a practical storage and handling consideration.

Listed on Amazon as: Garvee RV Slide Out Support Jacks (Set of 4) – 20,000lb Heavy Duty Rv Stabilizer Jacks Support, 21"-49" Quick-Lift Adjustable – Power Drill & Hand Crank Compatible for Campers, Travel Trailers & RVs

#9

9. Garvee Quick-Lift Supports

• Dimensions: 24.61 x 10.04 x 12.6 in
• Weight: 41.2 lb
• Load Capacity: 10000 lb
• Material: Alloy Steel

Best for: Tall slide-out support jacks.

Why it ranks #9: These four steel slide-out supports adjust from 21 to 49 inches and offer drill or hand-crank operation; listed capacity differs between title and specifications.

The telescoping 21–49-inch range gives these Garvee supports a tall adjustment span for RV slide-out support points. A flat top support block provides a broad contact surface, while the listing specifies drill and hand-crank compatibility for raising or lowering the jacks.

Quick telescopic adjustment across 21–49 inches can help reduce setup effort when supporting taller slide-outs, and the flat top block provides the specified contact point at the support area. The product listing identifies drill and hand-crank operation, offering two adjustment methods. Alloy-steel construction and a listed set weight of 41.2 pounds are relevant when planning storage and positioning. The title and specification differ on capacity, so the supplied listing does not give a single consistent figure to rely on.

Skip it if you need one consistent capacity figure before selecting supports; the listing's title and specifications disagree on this set's load rating.

This Garvee set suits RV owners seeking tall, adjustable slide-out supports with flat tops and two stated operating methods. Review the capacity discrepancy in the listing before deciding whether its support rating fits your application.

Listed on Amazon as: Garvee 4 Pack RV Slide Out Supports Jack with a Flat Top Support Block, RV Stabilizer Jacks Supports Up to 20,000lbs, 21"-49" Quick-Lift Adjustable – Drill & Hand Crank Compatible for Campers & RVs

#10

10. Kohree Slide-Out Supports

• Dimensions: 21.45 x 9.25 x 5.31 in
• Weight: 18.3 lb
• Load Capacity: 5000 lb
• Material: Stainless Steel

Best for: Flat-top slide-out support pair.

Why it ranks #10: This two-pack is specifically for slide-outs, with flat top blocks and drill-compatible adjustment; its listed capacity is 5,000 pounds.

Kohree’s flat top support block provides a level contact surface without an extra wood block, simplifying the stated slide-out support setup. The two stainless-steel jacks include a drill socket and crank handle, with drill-assisted adjustment offered as a faster alternative to traditional hand cranking.

The flat top is intended to support a slide-out without a separate wood block, reducing the number of pieces to position during setup. A drill socket allows powered raising and lowering, while the included crank handle preserves a manual option. The two-jack set is listed for campers, motorhomes, RVs, and trailers, and its 5,000-pound load capacity defines a key selection boundary. Stainless-steel construction is specified for the supports.

Skip it if you need four supports in one set; the Garvee RV Slide Out Support Jacks (Set of 4) includes four drill-compatible jacks.

Kohree suits RV owners seeking a two-piece slide-out support set with flat tops and drill or hand adjustment. Its 5,000-pound listed capacity and two-jack quantity are important boundaries when planning support requirements.

Listed on Amazon as: Kohree RV Slide Out Supports Jack, with Flat Top Support Block, Set of 2