Best Floor Jack For Truck: Compare 10 Hydraulic Models

#1 · Best Overall

1. BIG RED T83006

• Load Capacity: 3 tons (6,000 lbs)
• Material: Steel
• Compatible with Vehicle Type: Car, Sport Utility Vehicle, Truck, Van

Best for: Extended-height truck service.

Why it ranks #1: Its listing explicitly includes extended-height trucks, and the 3-ton jack reaches 20-7/8 inches with an extra saddle included.

A 20-7/8-inch maximum lift gives the BIG RED T83006 useful stated reach for service involving SUVs and extended-height trucks. Its extra saddle, 3-ton capacity, and trolley-style caster arrangement add practical details for owners who need a jack that can be positioned around a garage work area.

The 5-7/8-inch minimum height and 20-7/8-inch maximum height define the jack's access and reach range, with an extra saddle called out for SUVs and extended-height trucks. Its 6,000-pound capacity suits listed cars, trucks, vans, and SUVs. Two large steel casters and two 360-degree swivel casters support maneuvering the trolley jack into position, while the heavy-duty steel construction is specified for long-term durability.

Skip it if you need a lower entry height than 5-7/8 inches; the VEVOR 3 Ton Low Profile Floor Jack lists an 85 mm minimum height.

This suits owners of SUVs and extended-height trucks who value extra saddle reach and caster-assisted positioning. Its 5-7/8-inch minimum height is the key fit boundary for lower-clearance vehicles.

Listed on Amazon as: BIG RED Hydraulic Trolley Service/Floor Jack with Extra Saddle (Fits: SUVs and Extended Height Trucks): 3 Ton (6,000 lb) Capacity, Red, T83006

#2

2. BLACKHAWK B6350

• Load Capacity: 3.5 tons
• Material: Steel
• Compatible with Vehicle Type: Bus, Car, Truck, SUV, Van, RV, Bus, Trailer…

Best for: Controlled garage lifting.

Why it ranks #2: The 3.5-ton, 7,000-pound capacity and stated truck compatibility offer more rated capacity than the 3-ton options.

Fast Lift technology moves the BLACKHAWK B6350 quickly to the jacking point with no load, helping streamline initial positioning before a vehicle is raised. Its 3.5-ton capacity, swivel saddle, and rugged universal joint add relevant capabilities for garage service involving trucks, SUVs, and other listed vehicles.

The fast-lift feature speeds travel to the jacking point when there is no load, while the swivel saddle supports easier jack positioning. A rugged universal joint provides precise load control, complementing the 7,000-pound capacity for listed vehicle types that include trucks and SUVs. The product information emphasizes that the jack is for lifting, not supporting the vehicle, so use it only for raising and follow the separate support requirement.

Skip it if you need equipment that supports a vehicle after lifting; this jack is explicitly for lifting, not supporting, the load.

This suits garage users who value fast unloaded positioning, a swivel saddle, and controlled lifting for trucks or SUVs. Treat it strictly as a lifting tool, not as support for a raised vehicle.

Listed on Amazon as: Blackhawk B6350 Black/Red Fast Lift Service Jack – 3.5 Ton Capacity, 28 1/2" L x 13 3/4" W x 6 1/2" H

#3 · Lowest Minimum Lift Height

3. VEVOR 3 Ton Low Profile

• Load Capacity: 3 tons
• Material: Alloy Steel
• Compatible with Vehicle Type: Truck

Best for: Low-clearance DIY lifting.

Why it ranks #3: Its 3.35-inch minimum height is the lowest listed, while the product is specified for trucks and lifts up to 19.69 inches.

An 85 mm minimum height gives the VEVOR 3-ton jack a low entry point for vehicles with limited ground clearance. It lifts to 500 mm and uses dual parallel pump technology, pairing a stated 6,600-pound capacity with a wide range for cars, trucks, and SUVs.

The 85-to-500 mm lift range pairs low initial access with substantial stated reach, which can support varied maintenance tasks across listed family cars, trucks, and SUVs. A 3-ton capacity defines its load limit, while the dual parallel pump design supports the lifting process. The alloy-steel construction and 31.7-inch length are practical details to consider when planning where the jack will be used and stored.

Skip it if you need a higher stated load rating than 3 tons; the YELLOW JACKET 5 Ton Hydraulic Low Profile Floor Jack is rated for 10,000 pounds.

This suits DIY owners working on low-clearance cars, trucks, or SUVs who need a low entry height and 500 mm maximum lift. Keep its 3-ton capacity in mind for heavier vehicles.

Listed on Amazon as: VEVOR 3 Ton Low Profile Floor Jack

#4 · Best 4-Ton Lift Range

4. YELLOW JACKET AS84009

• Load Capacity: 4 tons
• Material: Alloy Steel
• Compatible with Vehicle Type: Car, Truck

Best for: Low-entry pickup lifting.

Why it ranks #4: This steel jack is listed for trucks and offers 4-ton capacity with a 4-5/16-inch minimum and 19-7/8-inch maximum height.

A 4-5/16-inch minimum height gives the YELLOW JACKET 4-ton jack a low entry point, while its 19-7/8-inch maximum lift extends the usable range. The dual-pump design, steel construction, and built-in overload protection add practical considerations for truck and car service.

The 8,800-pound rating pairs with a lift range from 4-5/16 to 19-7/8 inches, giving users a broad stated span for compatible lifting jobs. Dual pumps support the quick-lift function, while the built-in safety valve is specified to provide overload protection for the user and jack. Its heavy-duty steel construction suits shop use, and the listing identifies cars and trucks as compatible vehicle types.

Skip it if you need to slide under a vehicle with less than 4-5/16 inches of clearance; the VEVOR 3 Ton Low Profile Floor Jack lists an 85 mm minimum height.

This is a fit for car and truck owners seeking 4-ton capacity, dual-pump lifting, and overload protection. Its 4-5/16-inch minimum height sets a boundary for vehicles with especially low ground clearance.

Listed on Amazon as: YELLOW JACKET Low Profile Floor Jack with Dual Pumps Quickly Lift Hydraulic Car Jack with Pad, 4 Ton (8,800 lb) Capacity

#5

5. AV Steel AV-402F

• Load Capacity: 4 tons
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Standard pickup owners.

Why it ranks #5: Its 4-ton capacity suits many standard pickup trucks, with a 4-1/4-to-19-3/4-inch range; the listing excludes lifted vehicles.

A 4-ton capacity paired with a 4-1/4-inch minimum height gives this AV Steel jack a broad working range for standard pickups, SUVs, vans, and cars. Its 19-3/4-inch maximum lift adds useful reach for routine vehicle service, provided the vehicle falls within the stated compatibility limits.

The dual-piston hydraulic pump is the key workflow feature, paired with capacity up to 8,000 pounds for lifting compatible vehicles. The 4-1/4-inch minimum height and 19-3/4-inch maximum height provide a useful span from initial access to raised working position. AV Steel lists standard pickup trucks, SUVs, vans, and cars as suitable, but specifically excludes sports cars, RVs, heavy commercial trucks, and lifted vehicles, so those boundaries matter before selecting it.

Skip it if you need a jack for a lifted pickup or heavy commercial truck; AV Steel lists those vehicles as unsuitable for this model.

This suits owners maintaining a standard pickup, SUV, van, or car who want a dual-piston jack with substantial lift range. Its stated limits rule it out for lifted vehicles, RVs, sports cars, and heavy commercial trucks.

Listed on Amazon as: AV Steel Heavy-Duty Floor Jack 4 Ton (8,000 lbs), Lift Range 4-1/4" to 19-3/4" for Cars, Vans, SUVs & Pickup Trucks, Hydraulic Steel Floor Jack with Dual Piston Pump – Not for Sports Cars or RVs

#6

6. YELLOW JACKET 5 Ton

• Load Capacity: 5 Tons
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Higher-capacity truck lifting.

Why it ranks #6: The 5-ton capacity and stated truck compatibility suit buyers seeking a higher-rated jack, though its lift range is not provided.

A 5-ton, 10,000-pound rating is the central appeal of this YELLOW JACKET low-profile floor jack, positioning it for heavier lifting needs than a 3-ton model. The listing identifies cars, trucks, and SUVs, combining that capacity with a low-profile format for garage and DIY maintenance.

The alloy-steel jack pairs a 10,000-pound maximum capacity with a low-profile design, a combination aimed at heavier vehicles where underbody access matters. YELLOW JACKET lists cars, trucks, SUVs, and other large automotive models as intended uses, covering common garage maintenance scenarios. The supplied information does not state a numerical minimum or maximum lift height, so buyers who need a precise clearance or reach measurement should weigh that limitation against their vehicle and work requirements.

Skip it if you require exact clearance and maximum-reach figures before choosing a jack; the VEVOR 3 Ton Low Profile Floor Jack lists both heights.

This is for truck and SUV owners prioritizing a 5-ton rating and low-profile format for garage work. Its supplied details lack numerical lift-height limits, so it may not suit jobs requiring precise clearance planning.

Listed on Amazon as: 5 Ton Hydraulic Low Profile Floor Jack, Grey

#7

7. Maxority 5 Ton Low Profile

• Load Capacity: 11000 lb
• Material: Steel
• Compatible with Vehicle Type: Car

Best for: Heavy-duty workshop lifting.

Why it ranks #7: Its 11,000-pound capacity and dual-piston pump are substantial, but the supplied details do not give a specific truck fit or lift range.

An 11,000-pound capacity is the defining feature of the Maxority 5-ton jack, giving workshop users a higher stated load limit for heavy-duty vehicle lifting. Its low-profile format and dual-piston quick-lift pump target a practical combination of under-vehicle access and faster pumping workflow.

The low-profile design pairs with a dual-piston quick-lift pump, combining access beneath lower-clearance vehicles with a pump system intended to reduce lifting effort. Maxority rates the steel jack for 11,000 pounds and lists cars, trucks, and SUVs among its intended vehicles. At 100 pounds, it is a substantial piece of shop equipment, so consider its weight when planning where it will be stored and used.

Skip it if you need a jack that is easier to move around the garage; the listed weight is 100 pounds.

Choose this for workshop lifting where 5-ton capacity, low-profile access, and a dual-piston pump suit the job. Its 100-pound weight is an important handling consideration for buyers who regularly relocate equipment.

Listed on Amazon as: Maxority 5-Ton (11000lbs) Low Profile Hydraulic Super Heavy-Duty Steel Floor Jack with Dual Pistons Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles (Red, 5 Ton Low Profile)

#8

8. AV Steel AV-300101F

• Load Capacity: 6000 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Truck

Best for: Standard truck maintenance.

Why it ranks #8: The 3-ton jack is listed for standard pickup trucks and lifts to 18.5 inches, but excludes lifted and heavy-duty trucks.

A 5.5-inch minimum height and 18.5-inch maximum lift give this 3-ton AV Steel jack a defined range for standard trucks and other listed vehicles. Its single-piston hydraulic setup keeps the specification straightforward, with a 6,000-pound capacity for compatible cars, SUVs, minivans, and standard pickups.

This jack pairs a 6,000-pound capacity with a 5.5-to-18.5-inch lift range, offering a specified working span for standard pickup maintenance. The single-piston design distinguishes it from dual-piston models, while the alloy-steel construction provides the stated material choice for garage use. AV Steel excludes lifted vehicles, heavy-duty trucks, and RVs; for EVs, the product information recommends a jack-point adapter to align with the manufacturer's lift points.

Skip it if you service lifted or heavy-duty trucks; the Maxority 5-Ton Low Profile jack offers a higher stated capacity and low-profile format.

This fits owners servicing standard pickups, SUVs, minivans, or cars within its 3-ton rating and lift range. Skip it for lifted or heavy-duty trucks and RVs; EV owners should note the adapter recommendation.

Listed on Amazon as: AV Steel 3 Ton Floor Jack (6000 lbs), Single Piston Steel Hydraulic Floor Jack, Lift Range 5.5" to 18.5", Fits Cars, SUVs & Standard Trucks – Not for Lifted Vehicles or Heavy-Duty Trucks

#9

9. Maxority 3 Ton Low Profile

• Load Capacity: 6600 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Lowered-vehicle access.

Why it ranks #9: Its low-profile, extended-reach design can help with limited clearance, but the supplied vehicle compatibility lists only cars.

Extended reach and an ultra-low profile are the defining features of this Maxority 3-ton jack, helping it reach under vehicles with minimal ground clearance. The listing specifically calls out sports cars, lowered vehicles, and aftermarket modifications, while the 6,600-pound rating sets its lifting capacity.

The low-profile shape and extended reach work together to address access beneath lowered vehicles, including sports cars and vehicles with aftermarket modifications. Its dual-piston quick-lift pump supports a faster lifting workflow, and the 3-ton (6,600-pound) rating defines the load limit. The listing includes a pumping handle, but gives no numerical minimum or maximum lift height, so buyers needing exact clearance measurements should account for that missing specification.

Skip it if you need stated lift-height measurements before purchase; the Jack Boss 3 Ton Low Profile lists a 3-15/16-inch minimum and 18-5/16-inch maximum.

This fits owners of lowered vehicles or sports cars who need extended reach and low-profile access within a 3-ton rating. The absence of numerical lift-height figures is a boundary for measurement-dependent jobs.

Listed on Amazon as: Maxority 3-Ton (6600lbs) Low Profile Hydraulic Heavy-Duty Steel Floor Jack with Dual Pistons Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles (Random Color, 3 Ton Low Profile)

#10

10. Jack Boss 3 Ton Low Profile

• Load Capacity: 3 tons
• Material: Aluminum
• Compatible with Vehicle Type: Bus, Trailer

Best for: Low-clearance vehicle owners.

Why it ranks #10: It has a 3-ton rating and 3-15/16-inch minimum height, but its listed fits emphasize cars, SUVs, trailers, and minivans rather than trucks.

A 3-15/16-inch minimum height lets the Jack Boss 3-ton jack reach beneath vehicles with limited ground clearance. Its aluminum-and-steel construction, dual-piston quick-lift pump, rubber saddle, and two-piece handle make the package relevant for owners balancing access with practical garage handling.

The low minimum height pairs with a maximum lift of 18-5/16 inches, supporting access and lift range for listed vehicles such as SUVs, MPVs, station wagons, and minivans. A dual-piston quick-lift pump supports the lifting workflow, while the included rubber saddle provides the stated contact surface. The two-piece handle can be separated for storage, and the product is described as overload-tested for safety at 1.5 times its rated capacity.

Skip it if you need more than 18-5/16 inches of lift; the BIG RED T83006 reaches a stated maximum of 20-7/8 inches.

This suits owners of lower-clearance SUVs and other listed vehicles who value a low entry height and a two-piece handle. Check that its 3-ton rating and 18-5/16-inch maximum meet the job.

Listed on Amazon as: Jack Boss 3 Ton Low Profile, Aluminum and Steel Racing Floor Jack with Dual Pistons Quick Lift Pump, 1.5X Overload Tested for Safety, Sport Utility Vehicle, Lifting Range 3-15/16" min to 18-5/16" max