Best Deals On Shocks for Cars, SUVs, and Trucks

#1 · Best Overall

1. Complete Struts Ram ProMaster Kit

• Compatible with Vehicle Type: Truck
• Material Type: Rubber
• Weight: 72 lb

Best for: Ram ProMaster 1500 complete suspension refresh.

Why it ranks #1: The package combines two complete front struts with two rear shocks and lists direct bolt-on fitment for the Ram ProMaster 1500.

Two complete front struts with coil springs plus two rear shocks make this set a broad replacement package for 2014–2024 Ram ProMaster 1500 models. Its direct bolt-on description specifies no modifications, giving buyers a route to replace assembled front units and rear shocks together.

The preassembled front struts and coil springs avoid rebuilding the old front strut assemblies, while the two rear shocks extend the package to both ends of the vehicle. Complete Struts describes the set as matched pairs intended to improve comfort and service life. Direct bolt-on replacement is specified without modifications, but the supplied guidance recommends an alignment after installation. A thorough inspection of components such as control-arm bushings and ball joints is also recommended to identify potential alignment issues.

Skip it if you do not own a listed 2014–2024 Ram ProMaster 1500; KAX's complete set is listed for 2004–2008 Acura TL instead.

A practical match for ProMaster 1500 owners seeking front assemblies and rear shocks in one package. The vehicle application is specific, and the recommended post-installation alignment should be part of the repair plan.

Listed on Amazon as: COMPLETESTRUTS – Front Quick Complete Strut Assemblies with Coil Springs and Rear Shock Absorbers Replacement for 2014-2024 Ram ProMaster 1500 – Set of 4

#2 · Complete Assembly Set

2. KAX Acura TL Strut Set

• Compatible with Vehicle Type: Car
• Weight: 60.1 lb

Best for: 2004–2008 Acura TL full replacement.

Why it ranks #2: This application-specific four-piece set includes two front and two rear complete strut assemblies for the Acura TL, with a two-year warranty.

Two front and two rear complete strut assemblies give this KAX kit four-corner coverage for 2004–2008 Acura TL models. The package includes complete assemblies at both ends, making it a different repair scope from a shock-only set and helping owners replace multiple suspension units together.

The kit contains two front complete strut assemblies and two rear complete assemblies, so buyers can address all four corners in one package rather than source each position separately. KAX describes the parts as direct OE replacements and specifies compatibility with 2004–2008 Acura TL models. That narrow application is useful for owners of the listed car but makes vehicle selection central. The included assembly format also distinguishes it from shock-only options; verify the exact TL application before purchase.

Skip it if you own a Ram ProMaster 1500 rather than an Acura TL; Complete Struts' set is listed for 2014–2024 ProMaster 1500 models.

This kit suits 2004–2008 Acura TL owners planning a four-corner strut replacement with complete assemblies. Its stated application is narrow, so use the exact vehicle details to confirm the kit matches your TL.

Listed on Amazon as: KAX Set of 4 Front and Rear Strut Assembly for 2004-2008 TL

#3 · Lifted Truck Set

3. TrendsAuto Hydro 7000 Set

• Compatible with Vehicle Type: Truck

Best for: Lifted Super Duty truck owners.

Why it ranks #3: The four-shock package is specified for Super Duty 4WD trucks with stated front and rear lift ranges, plus velocity-sensitive valving.

Velocity-sensitive valving adapts to vehicle speed, giving the TrendsAuto Hydro 7000 set a control-focused feature for specified lifted Super Duty trucks. The package includes two front and two rear hydraulic shocks, with fitment for 2005–2016 F-250 4WD trucks with 0–3-inch lifts and defined F-350 lift limits.

The set pairs front and rear shocks, while its orifice disk design optimizes fluid flow for responsiveness across driving conditions. Velocity-sensitive valving is specified to adapt to speed, supporting control as operating conditions change. Fitment is notably specific: F-250 Super Duty 4WD models allow 0–3 inches of front and rear lift, while F-350 4WD models allow 0–3 inches front and 0–2 inches rear. Check lift height and model before selecting the set.

Skip it if you have an F-350 with more than 2 inches of rear lift; this set's listed rear-lift range stops at 2 inches.

A fit for F-250 or F-350 4WD owners within the listed lift ranges who want front and rear hydraulic shocks together. Pay particular attention to the lower F-350 rear-lift limit before ordering.

Listed on Amazon as: TrendsAuto Hydro 7000 Series Set of Front & Rear Hydraulic Action Shocks

#4

4. OCPTY Blazer RWD Shock Set

• Compatible with Vehicle Type: 1995-2005 for Chevy for Blazer,1987-1995 for…
• Material Type: Metal
• Weight: 0.27 g

Best for: Blazer and S10 multi-vehicle repairs.

Why it ranks #4: Four shock struts cover a range of Chevrolet, GMC, and Isuzu applications; the listing notes that springs, mounts, rubbers, and bushings are not included.

Four shocks in one set cover a broad range of listed Blazer, S10, Jimmy, Sonoma, and Hombre applications, giving owners a way to address front and rear replacements together. OCPTY lists compatible shock references 344041 and 344040, while the package excludes springs, mounts, rubbers, and bushings.

The application list reaches Chevrolet Blazer and S10 models, several GMC S-series vehicles, and Isuzu Hombre, so this set suits owners whose exact year and model appear in the fitment details. Four shock struts provide front and rear coverage in a single purchase, simplifying parts selection for a full shock replacement. However, the listed components do not include springs, mounts, rubbers, or bushings; those parts must be handled separately if the repair requires them.

Skip it if you need springs or mounts included; Complete Struts' Ram ProMaster 1500 set includes complete front struts with coil springs.

Consider this set for a listed Blazer, S10, Jimmy, Sonoma, or Hombre requiring front and rear shocks. It is only the shocks, so plan separately for any springs, mounts, rubbers, or bushings your repair needs.

Listed on Amazon as: OCPTY Front Rear Shocks Struts for Chevy Blazer 1995-2005 344040 344041 RWD

#5 · 4WD Application

5. OCPTY S10 4WD Shock Set

• Compatible with Vehicle Type: 1995-2005 for Chevy for Blazer,1982-2004 for…
• Material Type: Steel

Best for: Older 4WD S10 and Blazer owners.

Why it ranks #5: This set targets listed 4WD Chevrolet and GMC vehicles, with an explicit warning to verify OE number, year, make, model, and engine.

The fitment coverage spans Chevrolet S10 4WD models from 1982 through 2004, giving owners of many older S10s a front-and-rear shock option in one set. It also lists S10 Blazer, Blazer, GMC Jimmy, Sonoma, Isuzu Hombre, and Oldsmobile Bravada applications, with specific drivetrain and package limits to observe.

This is a four-wheel-drive-focused choice for listed S10 and S10 Blazer applications, with additional fitment for select Blazer, Jimmy, Sonoma, Hombre, and Bravada models. The broad vehicle list can help owners source front and rear shocks together rather than piece together separate applications. The listing specifies steel construction and calls out exclusions such as ZR2 Highrider packages on some applications. Check year, engine, drivetrain, and package details carefully before choosing; fitment varies across the listed vehicles.

Skip it if you need a rear-wheel-drive-specific Blazer set; OCPTY 344040/344041 lists Blazer applications without the 4WD-only emphasis here.

A good match for owners replacing front and rear shocks on a listed older 4WD S10 or S10 Blazer. Its extensive application list has exceptions, so verify drivetrain, engine, year, and package before ordering.

Listed on Amazon as: OCPTY Front Rear Shocks Struts for Chevy S10 Blazer 4WD 1983-1994 344042

#6 · One-Year Warranty

6. SCITOO Blazer Shock Set

• Compatible with Vehicle Type: Fit for 1987-2005 for Chevrolet for Blazer…
• Material Type: Metal

Best for: Four-corner Blazer and S10 replacement.

Why it ranks #6: The four-piece kit includes two front and two rear absorbers and lists Chevrolet, GMC, and Isuzu fitments, with a one-year manufacturer warranty.

Two front and two rear shock absorbers make this SCITOO set a four-corner replacement option for listed Chevrolet and GMC trucks and SUVs. Its fitment spans Blazer, S10, S10 Blazer, Jimmy, S15, S15 Jimmy, Sonoma, and Isuzu Hombre models, offering a broad range of applications to check.

The four-piece configuration supplies two front and two rear absorbers, which lets a buyer source all four replacement shocks as one set. SCITOO lists fitment across multiple Chevrolet and GMC nameplates and the Isuzu Hombre, so the detailed year, make, model, trim, and engine check is important before purchase. The parts are metal, and the supplied information describes dimension, material, durability, and performance testing. This set is for shocks, not a complete spring-and-mount assembly.

Skip it if you need complete struts with springs; Complete Struts' Ram ProMaster 1500 kit includes front struts with coil springs.

This fits buyers replacing all four shocks on a vehicle in SCITOO’s listed applications. Check the specific year and configuration, and choose another repair package if you need complete assemblies with springs and mounts rather than shock absorbers.

Listed on Amazon as: SCITOO 4pcs Front Rear Shock Absorbers Replace for Chevy Blazer 2WD

#7

7. SCITOO Jeep Grand Cherokee Set

• Compatible with Vehicle Type: Jeep Grand Cherokee
• Material Type: Alloy Steel
• Weight: 16.6 lb

Best for: 1999–2004 Jeep Grand Cherokee owners.

Why it ranks #7: The four-piece front-and-rear shock set is specifically listed for Jeep Grand Cherokee applications and includes a one-year warranty.

A four-piece front-and-rear shock set is listed for 1999–2004 Jeep Grand Cherokee models, allowing owners to source both axles together. SCITOO specifies two front and two rear absorbers and alloy-steel material, while clearly excluding springs, washers, bushings, and mounts from the package.

The four absorbers cover the front and rear, with driver- and passenger-side positions represented in the listing. That arrangement helps consolidate a shock-only replacement for the specified Grand Cherokee years. SCITOO identifies the set as a direct OE replacement and lists compatible references for checking the application. Because springs, washers, bushings, and mounts are not supplied, buyers replacing worn surrounding hardware will need to address those components separately. Confirm the exact vehicle application before installation.

Skip it if you need springs and mounts with the shocks; Complete Struts' Ram ProMaster 1500 set includes front struts with coil springs.

This set suits Grand Cherokee owners replacing shocks at both ends on a listed 1999–2004 model. It is not a complete suspension assembly, so plan for separate springs, washers, bushings, or mounts if needed.

Listed on Amazon as: SCITOO Front Rear Shocks for Jeep Grand for Cherokee Shock Absorbers 4pcs

#8

8. Monroe Restore Tundra Shock

• Compatible with Vehicle Type: Car, Truck

Best for: Select Toyota Tundra shock replacement.

Why it ranks #8: This single nitrogen gas-charged shock is listed for select Toyota Tundra models and uses a banded piston to reduce friction.

Nitrogen gas charging helps maintain tire-to-road contact while reducing aeration and shock fade, making this Monroe Restore absorber a focused option for select 2007–2021 Toyota Tundra models. Its banded piston is also specified to reduce friction, supporting responsiveness as road surfaces change.

The gas charge is intended to help maintain contact and handling, while the banded piston reduces friction between the piston and pressure tube for smoother response to changing surfaces. Monroe also describes the Restore line as filtering noise, vibration, and harshness, giving buyers a comfort consideration alongside control. This listing includes one shock absorber, not a pair. Fitment is limited to select Tundra models in the stated year range, so check the specific application before planning a repair.

Skip it if you need a pair in one purchase; Monroe Reflex 911277 is also a single shock, so select a listed multi-piece set instead.

This is for a Tundra owner whose specific model is covered and who needs one shock with gas charging and a friction-reducing banded piston. It is not a full-axle or four-corner kit.

Listed on Amazon as: Monroe Restore 210300 Shock Absorber For Select 2007-2021 Toyota Tundra Models

#9

9. KAX Chevrolet GMC Front Pair

• Compatible with Vehicle Type: Car

Best for: Heavy-duty Silverado front suspension.

Why it ranks #9: The package supplies two front shocks for a substantial list of Chevrolet and GMC truck and SUV applications, but does not provide a full-vehicle set.

A matched pair of 344383 front shock absorbers targets a range of Chevrolet and GMC heavy-duty trucks, including Silverado 2500 HD and 3500 HD applications. The two-piece set lets owners address both front shocks together, with fitment spanning select model years, engines, and drivetrains listed for those trucks.

This KAX set contains two front shock absorbers, making it appropriate for a front-axle replacement rather than a complete four-corner refresh. Its listed applications include Silverado 2500 HD and 3500 HD models, plus select Silverado 1500 HD, Avalanche 2500, and Suburban 2500 configurations. That breadth can help owners of specified heavy-duty models find a matched front pair, but fitment is tied to listed engine, drivetrain, and year combinations. Rear shocks are not included.

Skip it if you need front and rear shocks together; TrendsAuto Hydro 7000 H7091/H7060 includes front and rear pairs for specified Super Duty trucks.

Choose this pair for a listed Chevrolet or GMC application needing front shocks, especially the specified heavy-duty models. It does not cover the rear axle, and the detailed year, engine, and drivetrain fitment should guide selection.

Listed on Amazon as: KAX 344383 Front Shock Absorbers Set of 2 for Chevrolet & GMC

#10

10. Monroe Reflex Truck Shock

• Compatible with Vehicle Type: Truck
• Weight: 2472.08 g

Best for: Light trucks with higher center of gravity.

Why it ranks #10: This is a single truck shock with ASD valving for vehicles with a higher center of gravity, but the supplied data does not identify specific fitments.

Acceleration Sensitive Damping valving automatically adjusts to impacts, giving Monroe’s Reflex light-truck shock a feature aimed at reducing vehicle roll and dive. It is presented for vehicles with a higher center of gravity, where its changing damping response can support handling and ride comfort without relying on a fixed response alone.

Monroe pairs ASD valving with all-weather fluid containing friction-reducing modifiers, supporting smooth rod reaction as conditions change. A Fluon-banded piston provides a consistent seal between piston and pressure tube, which the product information links to control and durability. Those features make this a considered option for light trucks and other higher-center-of-gravity vehicles. It is a single shock absorber, however, so buyers repairing both sides or multiple corners need to source the additional units separately.

Skip it if you need a four-corner kit in one package; SCITOO 808659-5336-1049204923 includes two front and two rear absorbers.

A fit for light-truck owners seeking ASD damping and the listed piston and fluid features, particularly on higher-center-of-gravity vehicles. Confirm the vehicle application and account for this being one absorber, not a complete set.

Listed on Amazon as: Monroe 911277 Reflex Truck Shock Absorber