A strong big car jack combines enough rated capacity for your vehicle with a lift range and minimum height that fit its lift points; this roundup suits drivers maintaining cars, SUVs, pickups, and off-road vehicles. The BIG RED 4 Ton Floor Jack leads for broad garage use, pairing an 8,000-pound capacity with a 3-7/8-inch minimum height and a 20-inch maximum. Other options serve different needs, from low-clearance cars to higher-clearance trucks and off-road terrain.
Capacity alone does not establish compatibility: the jack must reach the correct lift point, and the vehicle must fall within its intended use. Compare the listed specifications, then verify your vehicle’s requirements and follow its manual.
A floor jack lifts a vehicle; it is not a substitute for properly rated jack stands when working underneath.
The BIG RED 4 Ton Floor Jack is the strongest all-around match among these big car jacks: its 8,000-pound capacity and 3-7/8-to-20-inch lift range suit a broad range of low-clearance and heavier vehicles. Its dual-piston pump is listed as lifting loads five times faster than a single pump, and its wide stance is intended to add stability. Check vehicle clearance and lift-point requirements before buying; capacity and range alone do not guarantee fit.
Our Top Picks
Best OverallIts 8,000-pound capacity, 3-7/8-to-20-inch range, dual-piston pump, and wide stance make it a versatile garage choice for cars, trucks, and SUVs.
View on Amazon
Low-Clearance PickMaxority 3-Ton Low-Profile Jack
The low-profile design and extended reach target lowered and low-clearance vehicles, while its 6,600-pound capacity covers substantial lifting needs.
View on Amazon
Broad Vehicle FitIts 8,000-pound rating and 4-1/4-to-19-3/4-inch lift range suit standard cars, vans, SUVs, and pickups, though it excludes sports cars and RVs.
View on Amazon- Off-Road Mobility Maxority 3-Ton Off-Road Jack
- Highest Capacity BIG RED 20 Ton Bottle Jack
Compare the Big Jacks at a Glance
| # | Product | Load Capacity | Material | Compatible with Vehicle Type | Buy |
|---|---|---|---|---|---|
| 1 | 1. BIG RED 4 Ton Floor JackBest Overall | 4 tons | Steel | Truck | View on Amazon |
| 2 | 2. Maxority 3-Ton Low-Profile JackLow-Clearance Pick | 6600 lb | — | Car | View on Amazon |
| 3 | 3. AV Steel 4 Ton Floor JackBroad Vehicle Fit | 4 tons | Alloy Steel | Car | View on Amazon |
| 4 | 4. Maxority 3-Ton Off-Road JackOff-Road Mobility | 6600 lb | Alloy Steel | Car | View on Amazon |
| 5 | 5. AUTOWN 3 Ton High-Clearance JackHigh-clearance SUV and truck lifting | 6600 lb | Alloy Steel, Aluminum | SUV Truck | View on Amazon |
| 6 | 6. AV Steel 3 Ton Floor JackStandard vehicles with 3-ton needs | 6000 lb | Alloy Steel | Truck | View on Amazon |
| 7 | 7. AUTOWN Heavy Duty 3 Ton JackStandard-ride-height household lifting | 6600 lbs | Alloy Steel | Fits most standard sedans, SUVs, crossovers… | View on Amazon |
| 8 | 8. DNA MOTORING 2 Ton JackCompact-car garage lifting | 2 tons | Alloy Steel | Car | View on Amazon |
| 9 | 9. BIG RED 20 Ton Bottle JackHighest Capacity | 20 Ton | Alloy Steel | Truck | View on Amazon |
| 10 | 10. Hi-Lift 48-Inch All-Cast JackOff-road and utility vehicle lifting | 6.6E+2 lb | Cast Iron | ATV, RV, Sport Utility Vehicle, Tractor… | View on Amazon |
Detailed Reviews: Best Big Jacks For Cars

#1 · Best Overall
1. BIG RED 4 Ton Floor Jack
- Load Capacity: 4 tons
- Material: Steel
- Compatible with Vehicle Type: Truck
Best for: Low-profile truck and SUV lifting.
Why it ranks #1: Its 8,000-pound capacity, 3-7/8-to-20-inch range, dual-piston pump, and wide stance make it a versatile garage choice for cars, trucks, and SUVs.
A 3-7/8-inch minimum height gives the BIG RED AT84007R access beneath low-profile vehicles, while its 20-inch maximum raises them for service. The 4-ton rating and dual-piston pump make it a strong match for buyers who need a high-capacity floor jack for cars, trucks, or SUVs.
The 8,000-pound capacity accommodates demanding general or heavy-duty industrial lifting, and the dual-piston pump is specified to lift loads five times faster than a single pump. Its 3-7/8-to-20-inch range connects low-clearance access with useful lift height. A wide stance adds stability under load, while two large steel casters and two 360-degree swivels support maneuvering around a garage or service area. The steel construction suits repeated workshop use.
- 4-ton, 8,000-pound capacity
- 3-7/8-to-20-inch lifting range
- Dual-piston pump lifts loads five times faster than a single pump
- Wide stance and four casters, including two 360-degree swivels
- At 100.8 pounds, it is a substantial jack to move or store.
Skip it if you need a lighter floor jack to carry around; the DNA MOTORING TOOLS-00234 weighs 9.75 kg and is rated for 2 tons.
This BIG RED suits garage or industrial users lifting compatible cars, trucks, and SUVs, especially when low entry height and substantial reach matter. Its 100.8-pound weight is a practical consideration for moving and storage.
Full product details
| Brand | BIG RED |
|---|---|
| Color | Red |
| Compatible with Vehicle Type | Truck |
| Included Components | Floor Jack, User Manual |
| Item Dimensions | 7.9 x 15.8 x 31.2 inches |
| Item Weight | 100.8 pounds |
| Load Capacity | 4 tons |
| Manufacturer | BIG RED |
| Part Number | AT84007R |
| Manufacturer Warranty Description | Includes a limited 1 year manufacturer warranty |
| Material | Steel |
| Model Number | AT84007R |
| Style Name | Steel |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: Big RED 4 Ton (8,000 lb) Hydraulic Low Profile Service Floor Jack
View on Amazon
#2 · Low-Clearance Pick
2. Maxority 3-Ton Low-Profile Jack
- Load Capacity: 6600 lb
- Compatible with Vehicle Type: Car
Best for: Low-clearance sports car access.
Why it ranks #2: The low-profile design and extended reach target lowered and low-clearance vehicles, while its 6,600-pound capacity covers substantial lifting needs.
Extended reach paired with an ultra-low profile lets the Maxority slide beneath cars with minimal ground clearance. Its 3-ton hydraulic capacity makes it a floor-jack option for lowered vehicles, sports cars, and cars with aftermarket modifications, where an ordinary jack’s access can be a limiting factor.
The low-profile shape and extended reach address two access challenges at once: getting under a low undercarriage and reaching farther beneath the vehicle. A dual-piston quick-lift pump supports faster lifting, while the 6,600-pound capacity is specified for car maintenance. The included pumping handle supports operation, and the steel construction suits home or workshop use. Its stated vehicle compatibility is car, so this is a more focused match than a jack described for trucks or SUVs.
- Ultra-low profile for minimal-clearance vehicles
- Extended reach for access beneath cars
- Dual-piston quick-lift pump
- 6,600-pound capacity for car maintenance
- The supplied specifications list car compatibility, not truck or SUV compatibility.
Skip it if you need a stated truck or SUV fit; the BIG RED AT84007R is listed for cars, trucks, and SUVs.
Choose this Maxority for garage work on low-clearance sports cars, lowered vehicles, or cars with modifications. Its 3-ton rating and car-focused compatibility are the relevant boundaries; check that your vehicle’s lifting requirements suit them.
Full product details
| Brand | Maxority |
|---|---|
| Color | Random Color |
| Compatible with Vehicle Type | Car |
| Included Components | Pumping Handle |
| Load Capacity | 6600 Pounds |
| Manufacturer | Maxority |
| Part Number | MAX1901-20MIX |
| Manufacturer Warranty Description | 90 Days Warranty |
| Model Number | MAX1901-20MIX |
| Style Name | hydraulic |
Listed on Amazon as: 3-Ton (6600lbs) Low Profile Hydraulic Heavy-Duty Steel Floor Jack with Dual Pistons Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles (Random Color, 3 Ton Low Profile)
View on Amazon
#3 · Broad Vehicle Fit
3. AV Steel 4 Ton Floor Jack
- Load Capacity: 4 tons
- Material: Alloy Steel
- Compatible with Vehicle Type: Car
Best for: Standard cars and pickup trucks.
Why it ranks #3: Its 8,000-pound rating and 4-1/4-to-19-3/4-inch lift range suit standard cars, vans, SUVs, and pickups, though it excludes sports cars and RVs.
The AV Steel 4-ton capacity covers up to 8,000 pounds, giving owners of standard cars, vans, SUVs, and pickup trucks a heavy-duty floor-jack option. Its dual-piston pump supports lifting, while the 4-1/4-to-19-3/4-inch range defines the clearance and height it can serve.
For a compatible standard vehicle, the 4-ton rating provides capacity up to 8,000 pounds, and the dual-piston pump offers a quicker-lift workflow than a single-piston design. The 4-1/4-inch minimum height and 19-3/4-inch maximum set a clear fit boundary before work begins. Alloy-steel construction and the included floor jack keep the package straightforward for garage lifting. The listing explicitly excludes sports cars, RVs, heavy commercial trucks, and lifted vehicles.
- 4-ton, 8,000-pound lifting capacity
- Dual-piston pump
- Lift range from 4-1/4 to 19-3/4 inches
- Listed for standard cars, vans, SUVs, and pickup trucks
- Not recommended for sports cars, RVs, heavy commercial trucks, or lifted vehicles.
Skip it if you lift a sports car, RV, heavy commercial truck, or lifted vehicle; the BIG RED AT84007R has a 3-7/8-inch minimum height.
Consider this AV Steel for standard cars, vans, SUVs, or pickups within its 8,000-pound rating and stated range. It is not the match for sports cars, RVs, heavy commercial trucks, or lifted vehicles.
Full product details
| Brand | AV Steel |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Car |
| Included Components | Floor jack X 1 |
| Item Dimensions | 31.69 x 14.56 x 8.07 inches |
| Load Capacity | 4 tons |
| Manufacturer | AV Steel |
| Part Number | AV-402F |
| Manufacturer Warranty Description | 1 Year Warranty |
| Material | Alloy Steel |
| Model Number | AV-402F |
| Style Name | Dual Piston |

#4 · Off-Road Mobility
4. Maxority 3-Ton Off-Road Jack
- Load Capacity: 6600 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Car
Best for: Off-road truck and ATV recovery.
Why it ranks #4: This 6,600-pound jack has oversized wheels for dirt, gravel, and uneven ground, making it the clearest match for off-road trucks, SUVs, and ATVs.
Oversized all-terrain wheels let this Maxority jack move across dirt, gravel, and uneven ground, enabling lifting beyond a smooth garage floor. Its 3-ton capacity and dual-piston system suit truck, SUV, and ATV maintenance where mobility over rough surfaces is part of the job.
The all-terrain wheels support repositioning on dirt, gravel, and uneven ground, while the 6,600-pound capacity is listed for heavy vehicles including trucks, SUVs, and ATVs. A dual-piston system delivers fast lifts, connecting mobility with a quicker lifting workflow. Heavy-duty alloy steel supports the off-road use case, and the adjustable-height saddle adds height flexibility. At 91 pounds, however, this is a substantial tool to transport or put away between jobs.
- Oversized wheels for dirt, gravel, and uneven ground
- 3-ton, 6,600-pound capacity
- Dual-piston lifting system
- Adjustable-height saddle
- At 91 pounds, it is heavy to transport between off-road work sites.
Skip it if you need a lighter jack for a smooth garage floor; the AUTOWN JAC-203YL-US weighs 36.3 pounds and is rated for 3 tons.
This Maxority fits truck, SUV, and ATV owners who need to move a jack across rough ground. Its 91-pound weight is a real transport consideration, and the 3-ton capacity defines its lifting limit.
Full product details
| Brand | Maxority |
|---|---|
| Color | Black and Red |
| Compatible with Vehicle Type | Car |
| Included Components | Floor Jack |
| Item Weight | 91 pounds |
| Load Capacity | 6600 Pounds |
| Manufacturer | Maxority |
| Part Number | MAX1903-25 |
| Manufacturer Warranty Description | 90 Days Warranty |
| Material | Alloy Steel |
| Model Number | MAX1903-25 |
| Style Name | Off-road |
Listed on Amazon as: 3 Ton (6600 lbs.) Big Wheel Dual Pistons Heavy-Duty Steel Construction Off-Road Jack, Hydraulic Car Jack with Extra Adjustable Height Saddle, for Trucks, SUVs, ATVs
View on Amazon
#5
5. AUTOWN 3 Ton High-Clearance Jack
- Load Capacity: 6600 lb
- Material: Alloy Steel, Aluminum
- Compatible with Vehicle Type: SUV Truck
Best for: High-clearance SUV and truck lifting.
Why it ranks #5: Its 7.1-to-20.9-inch range and 6,600-pound capacity are tailored to pickups, full-size SUVs, crossovers, and vans; measure clearance before choosing it.
A 20.9-inch maximum lift height gives this AUTOWN floor jack useful reach for pickups, full-size SUVs, crossovers, and vans. Its 3-ton, 6,600-pound capacity pairs that high-clearance range with heavy-gauge alloy steel, making it a garage option for compatible larger vehicles.
The 7.1-inch minimum height and 20.9-inch maximum define both access and lift height, so measuring frame clearance matters, particularly for sedans. A 6,600-pound capacity supports the listed SUV and truck use, while alloy-steel construction addresses demanding garage work. Rapid-lift hydraulic technology supports the lifting workflow, and the cross-shape rubber pad provides a specified contact surface. Together, these features suit higher-clearance vehicles better than a low-entry-height requirement.
- 3-ton capacity up to 6,600 pounds
- 7.1-to-20.9-inch lifting range
- Heavy-gauge alloy-steel construction
- Cross-shape rubber pad and rapid-lift hydraulic technology
- The 7.1-inch minimum height may not suit vehicles with low frame clearance.
Skip it if you need a jack for a low-clearance sports car; the Maxority MAX1901-20MIX is listed with an ultra-low profile and extended reach.
This AUTOWN suits owners of pickups, full-size SUVs, crossovers, or vans needing lift height up to 20.9 inches. Its 7.1-inch minimum height and 6,600-pound capacity are key limits to check against the vehicle.
Full product details
| Brand | AUTOWN |
|---|---|
| Color | Blue |
| Compatible with Vehicle Type | SUV Truck |
| Item Dimensions | 23.4 x 7.4 x 7.5 inches |
| Load Capacity | 6600 pounds |
| Manufacturer | AUTOWN |
| Material | Alloy Steel, Aluminum |
| Model Number | JAC-203BL |
| Style Name | floor |
Listed on Amazon as: 3 Ton Floor Jack, Alloy Steel Hydraulic Car Jack with Quick Lift & Cross-Shape Rubber Pad, 7.1-20.9 Inch Lifting Range for SUV Truck (6600 lbs)
View on Amazon
#6
6. AV Steel 3 Ton Floor Jack
- Load Capacity: 6000 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Truck
Best for: Standard vehicles with 3-ton needs.
Why it ranks #6: The 6,000-pound capacity and 5.5-to-18.5-inch range fit standard cars, SUVs, minivans, and pickups, but not lifted vehicles or heavy-duty trucks.
A 5.5-inch minimum height and 18.5-inch maximum give this AV Steel floor jack a defined range for standard cars, SUVs, minivans, and pickup trucks. Its 3-ton rating covers up to 6,000 pounds, making it a practical match for buyers whose vehicles fit those limits.
The 6,000-pound capacity and 5.5-to-18.5-inch lift range provide two concrete checks for matching the jack to a vehicle and job. Its single-piston hydraulic design is important to the lifting workflow: buyers seeking a dual-piston pump should look elsewhere. Alloy-steel construction suits garage use, and the package includes a product manual. For an EV, the listing recommends a jack-point adapter to align with manufacturer-specified lifting points.
- 3-ton capacity up to 6,000 pounds
- Lift range from 5.5 to 18.5 inches
- Listed for standard cars, SUVs, minivans, and pickup trucks
- EV jack-point adapter is recommended for alignment
- The single-piston design does not provide a dual-piston quick-lift pump.
Skip it if you lift a low-clearance car; the Maxority MAX1901-20MIX is listed with an ultra-low profile and extended reach.
Pick this AV Steel for standard cars, SUVs, minivans, or pickups that fit its 6,000-pound capacity and lift range. It is not suitable for lifted vehicles, heavy-duty trucks, or RVs; EV owners should note the adapter recommendation.
Full product details
| Brand | AV Steel |
|---|---|
| Color | Multi color |
| Compatible with Vehicle Type | Truck |
| Included Components | 3T Floor Jack X 1, Product manual X 1 |
| Item Dimensions | 26.4 x 14.2 x 8.3 inches |
| Item Weight | 63.9 pounds |
| Load Capacity | 6000 Pounds |
| Manufacturer | AV Steel |
| Part Number | AV-300101F |
| Manufacturer Warranty Description | 1 year |
| Material | Alloy Steel |
| Model Number | AV-300101F |
| Style Name | Quick lift |
Listed on Amazon as: AV Steel 3 Ton Floor Jack (6000 lbs), Single Piston Steel Hydraulic Floor Jack, Lift Range 5.5" to 18.5", Fits Cars, SUVs & Standard Trucks – Not for Lifted Vehicles or Heavy-Duty Trucks
View on Amazon
#7
7. AUTOWN Heavy Duty 3 Ton Jack
- Load Capacity: 6600 lbs
- Material: Alloy Steel
- Compatible with Vehicle Type: Fits most standard sedans, SUVs, crossovers…
Best for: Standard-ride-height household lifting.
Why it ranks #7: Its 6,600-pound rating and standard-vehicle fit suit many sedans, SUVs, crossovers, and light pickups, but its 7.1-inch minimum excludes low-clearance vehicles.
A 3-ton, 6,600-pound rating gives the AUTOWN JAC-203YL-US capacity for many standard sedans, SUVs, crossovers, and light pickups. Its 7.1-inch minimum height sets the key access boundary, while the included rubber saddle provides a specified contact component for household or professional repair work.
The 6,600-pound capacity serves a range of listed standard vehicles, and the 7.1-inch minimum height makes ground clearance an essential fit check before use. Heavy-duty steel construction with a rust-resistant finish supports use across different environments. The supplied rubber saddle gives buyers a contact component in the box, and the quick-lift pump addresses lifting workflow. Its stated fit excludes lowered and low-clearance vehicles, so measure clearance before selecting it.
- 3-ton, 6,600-pound capacity
- Listed for standard sedans, SUVs, crossovers, and light pickups
- Quick-lift pump
- Rust-resistant surface finish and included rubber saddle
- The 7.1-inch minimum height makes it unsuitable for lowered or low-clearance vehicles.
Skip it if you work on lowered or low-clearance vehicles; the Maxority MAX1901-20MIX has an ultra-low profile and extended reach.
Choose this AUTOWN for standard-ride-height sedans, SUVs, crossovers, or light pickups within its 6,600-pound limit. Its 7.1-inch minimum height is the critical boundary, so it does not fit lowered or low-clearance vehicles.
Full product details
| Brand | AUTOWN |
|---|---|
| Color | Yellow |
| Compatible with Vehicle Type | Fits most standard sedans, SUVs, crossovers, and light pickups. Min. height: 7.1". NOT for lowered or low-clearance vehicles. Measure your ground clearance before ordering. |
| Included Components | Hydraulic Floor Jack, Rubber Saddle * 3 |
| Item Dimensions | 23.4 x 7.5 x 7.4 inches |
| Item Weight | 36.3 pounds |
| Load Capacity | 6600 lbs |
| Manufacturer | AUTOWN |
| Part Number | JAC-203YL-CA |
| Manufacturer Warranty Description | 1-Year Limited Warranty |
| Material | Alloy Steel |
| Model Number | JAC-203YL-US |
| Style Name | Heavy Duty |
Listed on Amazon as: Heavy Duty 3 Ton Floor Jack, Hydraulic Car Jack with Quick Lift Pump
View on Amazon
#8
8. DNA MOTORING 2 Ton Jack
- Load Capacity: 2 tons
- Material: Alloy Steel
- Compatible with Vehicle Type: Car
Best for: Compact-car garage lifting.
Why it ranks #8: The 4,000-pound capacity and 5.1-to-13-inch range are appropriate for many cars, but the listing advises against pickups, trucks, and large SUVs.
At 2 tons and 4,000 pounds, the DNA MOTORING jack targets cars rather than oversized vehicles. Its 5.1-inch minimum and 13-inch maximum lift height define a compact operating range for garage service, giving car owners a clear capacity and clearance check before lifting.
The hydraulic trolley jack’s 5.1-to-13-inch range lets users raise a compatible car within a defined height window, while the 4,000-pound rating sets the load boundary. Overload protection is listed among its features, adding a safety-related check during operation. Its alloy-steel construction and 9.75-kilogram weight make it a manageable garage tool to position and store. The listing says it is not recommended for pickups, trucks, or very large SUVs.
- 2-ton, 4,000-pound capacity
- 5.1-inch minimum and 13-inch maximum lift height
- Overload protection
- 9.75-kilogram listed weight
- The 2-ton capacity and listing exclude pickups, trucks, and very large SUVs.
Skip it if you need a higher-capacity jack for pickups or SUVs; the AV Steel AV-402F is rated for 4 tons and lists those vehicle types.
This DNA MOTORING jack is for car owners whose lifting needs stay within 4,000 pounds and its 5.1-to-13-inch range. It is not the right match for pickups, trucks, or very large SUVs.
Full product details
| Brand | DNA MOTORING |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Car |
| Included Components | 1 x Garage Jack |
| Item Dimensions | 10 x 19 x 8 inches |
| Item Weight | 9.75 kg |
| Load Capacity | 2 tons |
| Manufacturer | DNA Motoring |
| Part Number | TOOLS-00234 |
| Manufacturer Warranty Description | Please contact the seller directly for warranty information for this product. |
| Material | Alloy Steel |
| Model Number | TOOLS-00234 |
| Style Name | 2 ton |
Listed on Amazon as: DNA MOTORING 2 Ton Low Profile Hydraulic Floor Jack, 4000 lbs Capacity
View on Amazon
#9 · Highest Capacity
9. BIG RED 20 Ton Bottle Jack
- Load Capacity: 20 Ton
- Material: Alloy Steel
- Compatible with Vehicle Type: Truck
Best for: Very-high-capacity bottle-jack lifting.
Why it ranks #9: Its 40,000-pound rating is far beyond typical car-jack needs, and the 9-7/16-inch minimum height limits fit for many passenger cars.
A 20-ton, 40,000-pound rating sets the BIG RED TAM92003B apart for heavy lifting in residential or commercial settings. Its bottle-jack form and 9-7/16-to-17-5/8-inch range suit buyers prioritizing substantial capacity and a compact body over a wheeled floor-jack design.
The 40,000-pound capacity addresses loads far beyond ordinary car-jack ratings, while the 9-7/16-to-17-5/8-inch range sets its operating window. An adjustable screw-top extension adds height versatility, and the serrated, heat-treated saddle provides a larger lifting area with a secure grip. Drop-forged alloy steel and an inner-and-outer welded structure are specified for durability and leak-free performance. As a bottle jack, its form is distinct from a wheeled floor jack for repositioning.
- 20-ton, 40,000-pound capacity
- Adjustable screw-top extension
- Serrated, heat-treated saddle for lifting area and grip
- Drop-forged alloy steel with welded structure
- The 9-7/16-inch minimum height excludes vehicles needing a lower-entry jack.
Skip it if you need to roll a jack beneath a low car; the BIG RED AT84007R is a floor jack with a 3-7/8-inch minimum height.
Select this BIG RED for heavy residential or commercial lifting that fits its 20-ton rating and height range. Its bottle-jack format and 9-7/16-inch minimum height are important boundaries for vehicle access and repositioning.
Full product details
| Brand | BIG RED |
|---|---|
| Color | Red |
| Compatible with Vehicle Type | Truck |
| Included Components | Bottle Jack, Handles, User Manual |
| Item Dimensions | 5.98 x 4.88 x 9.21 inches |
| Item Weight | 18.1 pounds |
| Load Capacity | 20 Ton |
| Manufacturer | Torin |
| Part Number | TAM92003B |
| Manufacturer Warranty Description | Limited 1 Year Manufacturer Warranty |
| Material | Alloy Steel |
| Model Number | TAM92003B |
| Style Name | 20 Ton (40,000 lbs) Standard |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: BIG RED 20 Ton (40,000 LBs) Torin Welded Hydraulic Car Bottle Jack for Auto Repair and House Lift, Red, TAM92003B
View on Amazon
#10
10. Hi-Lift 48-Inch All-Cast Jack
- Load Capacity: 6.6E+2 lb
- Material: Cast Iron
- Compatible with Vehicle Type: ATV, RV, Sport Utility Vehicle, Tractor…
Best for: Off-road and utility vehicle lifting.
Why it ranks #10: This off-road utility jack lists a 660-pound capacity and a 48-inch height, making it a poor fit for ordinary car lifting compared with floor jacks.
A 48-inch all-cast construction gives the Hi-Lift HL-485 its defining utility: a tall jack format for off-road and utility vehicles. Cast-iron components, a two-piece handle and socket, and a top winch connector clamp make it a different choice from a conventional hydraulic floor jack.
The 48-inch height and all-cast construction suit buyers looking for a long, rugged jack for listed vehicles including trucks, SUVs, ATVs, tractors, trailers, and UTVs. Its two-piece handle and socket support the operating setup, while the top winch connector clamp adds a specified connection feature. Zinc-plated hardware and a powder-coated finish are listed details. The stated capacity is 660 pounds, so buyers must treat that limit as a decisive constraint rather than assume conventional floor-jack capacity.
- 48-inch all-cast jack construction
- Two-piece handle and socket
- Top winch connector clamp
- Listed compatibility includes trucks, SUVs, ATVs, tractors, trailers, and UTVs
- The listed 660-pound capacity is far below the multi-ton ratings of conventional car floor jacks.
Skip it if you need a multi-ton hydraulic floor jack for a car; the BIG RED AT84007R is rated for 4 tons and has a 3-7/8-inch minimum height.
Consider the Hi-Lift for off-road or utility-vehicle work where its 48-inch form and listed vehicle compatibility suit the task. Its stated 660-pound capacity is a firm boundary for buyers seeking a multi-ton car jack.
Full product details
| Brand | Hi-Lift |
|---|---|
| Color | Red & Black |
| Compatible with Vehicle Type | ATV, RV, Sport Utility Vehicle, Tractor, Trailer, Truck, UTV, Van |
| Included Components | Jack, Safe Use Instructions |
| Item Dimensions | 47 x 12 x 6 inches |
| Item Weight | 13.61 g |
| Load Capacity | 6.6E+2 pounds |
| Manufacturer | Hi-Lift |
| Part Number | HL-485 |
| Manufacturer Warranty Description | 12 months from the date of purchase, only to the original owner, against defective materials and workmanship. |
| Material | Cast Iron |
| Model Number | HL-485 |
| Style Name | Utilitarian or Off-Road |
| Additional Information | Important information Safety Information Read instruction manual prior to use |
Listed on Amazon as: Hi-Lift Jack 48" All-Cast Jack HL-485
View on AmazonWhy rated capacity is not the whole fit test
A jack can have ample rated capacity and still fail to fit your vehicle’s lifting situation. The listed models show why: the BIG RED 20 Ton Bottle Jack carries a 40,000-pound rating, but its minimum height is 9-7/16 inches, which can prevent access beneath a low car. Conversely, the Maxority 3-Ton Low-Profile Jack is specifically designed for low-clearance access, despite its lower 6,600-pound rating.
A floor jack also needs room to roll as its arm rises; a constrained work area or an unsuitable lift point can undermine an otherwise compatible range. Check the vehicle manual for approved lift points and compare measured clearance with the jack’s minimum height.
Never treat the jack’s capacity as permission to lift any vehicle: the vehicle’s weight distribution, lift point, and the jack’s stated vehicle fit all matter.
A floor jack is not a support stand
A hydraulic floor jack is for lifting, not for holding a vehicle while you work beneath it. These products list lifting capacities and ranges, but the supplied data does not establish that any jack is a safe long-term support. Hydraulic pressure can be lost, and a jack can shift if it sits on an unsuitable surface or is poorly positioned.
After lifting, use appropriately rated jack stands at the vehicle-manufacturer-approved support points, and follow the vehicle and stand instructions; never rely on the jack alone. Also consider the jack style: a rolling floor jack needs usable floor space, while the BIG RED 20 Ton Bottle Jack has a compact footprint but starts at a much higher 9-7/16-inch lift height.
The Hi-Lift 48-Inch All-Cast Jack is a distinct off-road utility style, not a direct substitute for a garage floor jack. Match tool type to task, and make secure support a separate step.
How to Choose a Big Car Jack
Capacity and vehicle fit
Choose a capacity that meets your vehicle’s lifting requirements, and confirm the product explicitly suits its vehicle type. This set spans 2 tons (4,000 pounds) for the DNA MOTORING 2 Ton Jack, 3 tons or roughly 6,000–6,600 pounds across several floor jacks, 4 tons (8,000 pounds) for the BIG RED 4 Ton Floor Jack and AV Steel 4 Ton Floor Jack, and 20 tons for the BIG RED 20 Ton Bottle Jack. The highest rating is not automatically the best choice: the bottle jack’s high minimum height can rule it out for low cars.
Standard cars and light vehicles may suit a lower-capacity model if the vehicle requirements allow; heavier vehicles call for a compatible higher rating.
Minimum height and lift range
Compare the jack’s minimum height with the clearance at the vehicle’s approved lifting point, then check that its maximum height is enough for the intended lift. Listed ranges include 3-7/8 to 20 inches for the BIG RED 4 Ton Floor Jack, 4-1/4 to 19-3/4 inches for the AV Steel 4 Ton Floor Jack, and 7.1 to 20.9 inches for the AUTOWN 3 Ton High-Clearance Jack. The Maxority 3-Ton Low-Profile Jack is described as ultra-low profile, but its specifications do not give a numeric range.
Low cars favour a low entry height; pickups and full-size SUVs may favour greater lift height, provided the jack fits the vehicle and its lift point.
Terrain, reach, and jack style
Choose a jack design suited to where you will lift and how you need to reach the vehicle. The BIG RED 4 Ton Floor Jack has a wide stance, steel casters, and swivel casters for garage maneuvering; the Maxority 3-Ton Off-Road Jack lists oversized wheels for dirt, gravel, and uneven ground. A low-profile, extended-reach design such as the Maxority 3-Ton Low-Profile Jack is aimed at lowered cars, while higher-clearance pickups may better match the AUTOWN 3 Ton High-Clearance Jack.
Bottle and utility jacks are different trade-offs: the BIG RED 20 Ton Bottle Jack offers compact dimensions but starts at 9-7/16 inches, and the Hi-Lift 48-Inch All-Cast Jack is an off-road utility design. Choose based on workspace and task, not capacity alone.
Which Big Car Jack Should You Choose?
For a general garage jack that can serve many cars, trucks, and SUVs, choose the BIG RED 4 Ton Floor Jack: its 8,000-pound capacity and 3-7/8-to-20-inch range lead this group. If your car sits low, the Maxority 3-Ton Low-Profile Jack is designed for low-clearance access and extended reach. For standard vehicles needing 4-ton capacity, consider the AV Steel 4 Ton Floor Jack, while pickup and full-size SUV owners can compare the higher-reaching AUTOWN 3 Ton High-Clearance Jack.
Choose the Maxority 3-Ton Off-Road Jack when moving across uneven terrain matters. The BIG RED 20 Ton Bottle Jack and Hi-Lift 48-Inch All-Cast Jack are specialty options rather than first choices for ordinary car lifting.
In every case, verify clearance, approved lift points, and capacity before use.
Related Buying Guides
- Best Big Speakers For Cars
- Best Big Spoilers For Cars
- Best Car Jack For Truck
- Best Wheel Jack For Car
- Best Electric Car Jack
- Best Air Jacks For Cars
Frequently Asked Questions
Can a floor jack safely support a vehicle while I work underneath it?
No. A floor jack is for lifting, not for supporting a vehicle while you work underneath. After lifting, use appropriately rated jack stands on a firm, level surface, following the vehicle and stand instructions.
Never rely on a hydraulic jack alone, and keep people clear while raising or lowering the vehicle.
How do I confirm the correct jack point for my car or truck?
Check the owner’s manual or vehicle manufacturer’s service information for the approved lifting points; do not guess based on a visible seam or frame section. Confirm the point suits the jack saddle and the intended lift. If the instructions are unclear, ask a qualified technician before lifting.
What should I do if the jack saddle does not line up with the vehicle lift point?
Stop before lifting and reposition the jack on a firm, level surface so the saddle meets the approved lift point squarely. Do not tilt, force, or improvise an adapter to make it fit. If alignment remains uncertain, consult the vehicle manual or a qualified technician instead of proceeding.
How do I know whether a jack’s capacity and lift range suit my vehicle?
Check the vehicle’s weight and the manufacturer’s lifting guidance, then choose a jack with adequate capacity and a range that reaches the approved lift point. Also compare the jack’s minimum height with the vehicle’s clearance. Capacity and lift range alone do not guarantee that a jack will fit or lift safely.
Should I choose a bottle jack or an off-road jack for routine car lifting?
For ordinary garage lifting, compare the floor jacks first; the bottle and all-cast jacks here are specialty options. The off-road model is intended for trucks, SUVs, and ATVs, while the bottle jack lists 20-ton capacity. Verify the tool suits your vehicle, terrain, lift points, and intended task before use.
Final Words
For a general-purpose garage choice, the BIG RED 4 Ton Floor Jack stands out for its 8,000-pound capacity and 3-7/8-to-20-inch lift range. Low-clearance cars may be better matched to the Maxority low-profile option, while higher-reaching needs point toward the AUTOWN. Treat the bottle and all-cast jacks as specialty tools.
Before deciding, verify vehicle clearance, approved lift points, and capacity; use jack stands for work underneath.


