A strong bolt-on receiver hitch for a travel trailer should fit the trailer’s bumper or frame, provide the right receiver opening for your accessory, and stay within the lowest-rated component’s limits. For many RV owners carrying a bike rack or cargo carrier, a 2-inch receiver that fits their measured bumper is the relevant choice—not a claim of towing capacity alone. This roundup compares bumper adapters for 4-inch and 4-to-4.5-inch beams, an adjustable-beam design, a frame-mounted accessory hitch, and receiver tubes intended for hitch plates.
Capacity figures differ, and several products explicitly warn against using them to tow a trailer. Check your bumper construction, dimensions, and accessory load before choosing; a receiver’s fit and rating matter more than a larger number that does not match your setup.
The Nilight 92123B is the best overall choice for a 4-by-4-inch RV bumper: it provides a 2-inch receiver and lists 3,500 pounds gross trailer weight and 350 pounds tongue weight, subject to the lowest-rated component. It is a bolt-on bumper hitch with a 2-year warranty. Those figures do not establish that it is suitable for towing a travel trailer; Nilight describes it for carrying an RV-approved hitch-mounted rack.
Confirm bumper fit and use the receiver only within the hitch and accessory manufacturers’ limits.
Our Top Picks
Best OverallFits 4-by-4-inch RV bumpers and offers a 2-inch receiver; its listed 3,500-pound gross trailer and 350-pound tongue ratings are limited by the lowest-rated component.
View on Amazon
High Tongue RatingDesigned for 4-by-4-inch RV bumpers, with a 2-inch receiver and a stated 350-pound tongue rating; the product warns it is not for RV-level trailer towing.
View on Amazon
For Narrow BeamsTargets 4-to-4.5-inch beams and has a standard 2-inch receiver; its listed ratings are 2,000 pounds gross trailer weight and 200 pounds tongue weight.
View on Amazon- Rack Accessory Pick MaxxHaul 50173
Compare Receiver Options by Fit and Intended Use
| # | Product | Maximum Towing Capacity | Material | Compatible with Vehicle Type | Buy |
|---|---|---|---|---|---|
| 1 | 1. Nilight 92123BBest Overall | 3500 lb | Carbon Steel | Trailer | View on Amazon |
| 2 | 2. TOPTOW TTRV801High Tongue Rating | 3500 lb | Alloy Steel | 4" X 4" RV REAR BUMPER | View on Amazon |
| 3 | 3. Nilight 92116BFor Narrow Beams | — | Alloy Steel, Carbon Steel | Trailer | View on Amazon |
| 4 | 4. MaxxHaul 50173Rack Accessory Pick | — | Alloy Steel | RV | View on Amazon |
| 5 | 5. Ohuhu Y60-81000-23Compact bumper accessory mount | 200 lb | Carbon Steel | Trailer | View on Amazon |
| 6 | 6. Fioracl Adjustable HitchAdjustable-beam accessory mounting | 3500 lb | Alloy Steel | Trailer | View on Amazon |
| 7 | 7. Outus 2-Inch ReceiverAdjustable-hole bumper installation | — | Alloy Steel | RV | View on Amazon |
| 8 | 8. Stromberg Carlson CC-300Frame-mounted trailer accessory hitch | — | Alloy Steel | Car, Trailer | View on Amazon |
| 9 | 9. Quick Products QP-HS5839Four-hole receiver-tube replacement | 500 lb | Alloy Steel | Car, Truck | View on Amazon |
| 10 | 10. Buyers Products 1804055Pintle-plate towing switchovers | — | Carbon Steel | Trailer, Truck | View on Amazon |
Detailed Reviews: Best Bolt On Receiver Hitch For Travel Trailer

#1 · Best Overall
1. Nilight 92123B
- Maximum Towing Capacity: 3500 lb
- Material: Carbon Steel
- Compatible with Vehicle Type: Trailer
Best for: Higher-capacity square-bumper rack mount.
Why it ranks #1: Fits 4-by-4-inch RV bumpers and offers a 2-inch receiver; its listed 3,500-pound gross trailer and 350-pound tongue ratings are limited by the lowest-rated component.
A 3,500-pound gross-trailer-weight rating and 350-pound tongue rating distinguish this Nilight receiver among the listed square-bumper options. Its 2-inch opening accommodates matching-shank bike racks and cargo carriers, giving RV owners a way to mount accessories on a compatible 4-by-4-inch rear bumper.
The 4-by-4-inch square-bumper fit defines where this receiver belongs, while the 2-by-2-inch opening works with most listed 2-inch-shank bike racks and cargo carriers. Its 350-pound tongue rating supports a higher stated accessory load than the 200-pound options, but the product notes that the lowest-rated towing component limits the overall setup. Carbon-steel construction is specified, and the receiver is listed for trailer use; check the complete rig's ratings before loading or towing.
- Fits 4-by-4-inch square RV rear bumpers
- 2-inch receiver opening for matching accessories
- 350-pound tongue-weight rating
- 3,500-pound gross-trailer-weight rating
- The lowest-rated component limits the complete setup's capacity.
Skip it if you have a 4-to-4.5-inch bumper rather than a 4-by-4-inch one; the Nilight 92116B is specified for that beam range.
This Nilight suits owners of 4-by-4-inch bumper trailers seeking a receiver for compatible racks or carriers and wanting its stated 350-pound tongue rating. Overall capacity still depends on the lowest-rated component.
Full product details
| Brand | Nilight |
|---|---|
| Compatible with Vehicle Type | Trailer |
| Included Components | RV Bumper Hitch Receiver |
| Item Weight | 5.58 kg |
| Manufacturer | Nilight |
| Part Number | 92123B |
| Manufacturer Warranty Description | 2 Years Warranty |
| Material | Carbon Steel |
| Maximum Towing Capacity | 3500 pounds |
| Model Number | 92123B |
Listed on Amazon as: Nilight RV Bumper Hitch Receiver Fits for 4 inch X 4 inch Square RV Rear Bumpers 2 inch Receiver 3500 LBS Capacity Bolt-On Heavy Duty Steel for Camper Bike Racks Cargo Carriers
View on Amazon
#2 · High Tongue Rating
2. TOPTOW TTRV801
- Maximum Towing Capacity: 3500 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: 4" X 4" RV REAR BUMPER
Best for: Higher tongue-rating square-bumper mount.
Why it ranks #2: Designed for 4-by-4-inch RV bumpers, with a 2-inch receiver and a stated 350-pound tongue rating; the product warns it is not for RV-level trailer towing.
A 350-pound tongue-weight capacity gives the TOPTOW receiver a higher stated accessory-load limit than its listed 4-by-4-inch bumper fit alone suggests. Its 2-inch opening accepts most matching-shank bike racks and cargo carriers, turning a compatible square bumper into an accessory mounting point.
The 4-by-4-inch square-bumper specification identifies the intended mounting location, and the receiver can be mounted upside down according to the listing. Its 2-by-2-inch opening accepts most accessories with 2-inch shanks, while the 350-pound tongue rating provides a stated limit for planning the load. The bolts must be secured tightly around the bumper. A 5/8-inch pin or hitch lock is not included, and the receiver is explicitly not intended for RV-level trailer towing.
- Fits 4-by-4-inch square RV bumpers
- 2-inch opening for matching-shank accessories
- 350-pound tongue-weight capacity
- Can be mounted upside down
- A 5/8-inch hitch pin or lock is not included.
Skip it if you need a hitch pin or lock included; this TOPTOW receiver lists neither as supplied.
Choose the TOPTOW if your trailer has a 4-by-4-inch bumper and you want a 2-inch accessory receiver with a 350-pound tongue rating. Secure its bolts tightly, and do not use it for RV-level towing.
Full product details
| Brand | TOPTOW |
|---|---|
| Compatible with Vehicle Type | 4" X 4" RV REAR BUMPER |
| Item Weight | 4.45 kg |
| Manufacturer | TOPTOW |
| Part Number | 63803 |
| Material | Alloy Steel |
| Maximum Towing Capacity | 3500 pounds |
| Model Number | TTRV801 |
Listed on Amazon as: TOPTOW RV Bumper Hitch Receiver for 4in x 4in Beams,2in Receiver | Fits for Bike Racks, Cargo Carriers Camper-on, 3500lbs
View on Amazon
#3 · For Narrow Beams
3. Nilight 92116B
- Material: Alloy Steel, Carbon Steel
- Compatible with Vehicle Type: Trailer
Best for: Accessory receiver for mid-width beams.
Why it ranks #3: Targets 4-to-4.5-inch beams and has a standard 2-inch receiver; its listed ratings are 2,000 pounds gross trailer weight and 200 pounds tongue weight.
The Nilight 92116B pairs a 4-to-4.5-inch beam fit with a 200-pound tongue-weight rating, giving owners of that bumper size a defined option for carrying compatible accessories. Its 2-inch receiver opening suits most bike racks and cargo carriers with matching shanks.
The specified beam range helps distinguish this receiver from models intended for 4-by-4-inch bumpers, while its 2-by-2-inch opening accepts the listed class of 2-inch-shank racks and carriers. The 2,000-pound gross-trailer-weight and 200-pound tongue ratings are subject to the lowest-rated component in the setup. Alloy and carbon steel are listed as materials. These figures should not be treated as permission for RV-level trailer towing; the product description frames its use around carrying accessories.
- Fits 4-to-4.5-inch beams
- 2-inch opening for matching rack and carrier shanks
- 200-pound tongue-weight rating
- 2,000-pound gross-trailer-weight rating
- The 200-pound tongue-weight limit restricts heavier accessory loads.
Skip it if you want a higher tongue rating for accessories on a 4-by-4-inch bumper; the Nilight 92123B lists 350 pounds.
This Nilight is a fit-focused choice for 4-to-4.5-inch trailer beams and 2-inch-shank accessories within its 200-pound tongue limit. Consider the whole setup's lowest-rated component, and do not assume the rating permits trailer towing.
Full product details
| Brand | Nilight |
|---|---|
| Compatible with Vehicle Type | Trailer |
| Included Components | Bumper Hitch Receiver |
| Item Weight | 3.76 kg |
| Manufacturer | Nilight |
| Part Number | 92116B |
| Manufacturer Warranty Description | 2 Years Warranty |
| Material | Alloy Steel, Carbon Steel |
| Model Number | 92116B |
Listed on Amazon as: Nilight RV Bumper Hitch Receiver Fits for 4-4.5 inches Beams 2 inch Receiver 200 LBS Capacity Bolt-On Heavy Duty Steel for Camper Bike Racks Cargo Carriers
View on Amazon
#4 · Rack Accessory Pick
4. MaxxHaul 50173
- Material: Alloy Steel
- Compatible with Vehicle Type: RV
Best for: Four-inch bumper accessory mount.
Why it ranks #4: Fits a 4-inch square RV bumper and accepts 2-inch-shank accessories, with a 200-pound tongue capacity; the description cautions against trailer towing.
The MaxxHaul 50173 is specified for 4-inch square RV bumpers and provides a 2-by-2-inch receiver opening for matching accessory shanks. Its 200-pound tongue-weight capacity gives owners a clear limit when adding a bike rack, tire carrier, hitch step, or other compatible mount.
The square-bumper fit and 2-inch receiver opening make this a targeted accessory adapter rather than a general hitch-plate tube. Listed compatible uses include bike racks, RV tire carriers, and hitch steps, so owners can use one receiver interface for several accessory types. Its all-steel construction is described as durable and rust resistant. The 200-pound tongue limit matters when choosing a load, and the product expressly is not intended for RV-level trailer towing.
- Fits 4-inch square RV bumpers
- 2-by-2-inch receiver for matching shanks
- 200-pound tongue-weight capacity
- Listed for racks, tire carriers, and hitch steps
- Not intended for RV-level trailer towing.
Skip it if you need a receiver for trailer towing rather than accessories; this adapter is not intended for RV-level towing.
The MaxxHaul suits owners with a 4-inch square bumper who want a mount for a compatible rack, carrier, or step within 200 pounds. It is not a towing hitch for an RV-level trailer.
Full product details
| Brand | MAXXHAUL |
|---|---|
| Compatible with Vehicle Type | RV |
| Included Components | 50173 |
| Manufacturer | MaxxHaul |
| Part Number | 50173 |
| Manufacturer Warranty Description | 90 days |
| Material | Alloy Steel |
| Model Number | 50173 |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including bisphenol A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Listed on Amazon as: MaxxHaul 50173 Hitch Receiver 2" x 2" Adapter for 4 inch Square RV Bumpers
View on Amazon
#5
5. Ohuhu Y60-81000-23
- Maximum Towing Capacity: 200 lb
- Material: Carbon Steel
- Compatible with Vehicle Type: Trailer
Best for: Compact bumper accessory mount.
Why it ranks #5: Fits 4-to-4.5-inch bumpers when used with 2-by-2-inch square tubes and includes a hitch pin and cover; its 200-pound capacity is not for towing.
A 200-pound tongue-weight rating gives the Ohuhu a defined role as an accessory receiver for compatible RV bumpers. Its 2-by-2-inch opening accepts matching square-shank accessories, while its specified fit for 4-to-4.5-inch bumpers helps owners identify whether this bolt-on mount suits their trailer before installation.
The 4-to-4.5-inch bumper specification narrows the intended fit, and the listed requirement for at least 1 inch of space between bumper and trailer is important when positioning the receiver. Its carbon-steel construction and included hitch pin and cover provide the listed mounting components and a way to close the receiver when not in use. The 200-pound tongue rating is for accessory support; the product is explicitly not intended for towing, so it is not a trailer-towing hitch.
- Specifically fits 4-to-4.5-inch bumpers
- 2-by-2-inch square-tube receiver opening
- 200-pound tongue-weight capacity
- Includes hitch pin and receiver cover
- Not intended for towing purposes.
Skip it if you need a hitch for trailer towing; this receiver is explicitly limited to accessory use.
Choose the Ohuhu if your bumper measures 4 to 4.5 inches, has the required clearance, and you need a 2-inch-shank accessory mount. Its 200-pound tongue rating does not make it suitable for towing.
Full product details
| Brand | Ohuhu |
|---|---|
| Compatible with Vehicle Type | Trailer |
| Included Components | Bumper Hitch Receiver, Hitch Cover, Hitch Pin |
| Manufacturer | Ohuhu |
| Part Number | Y60-81000-23-US |
| Manufacturer Warranty Description | 1 Year |
| Material | Carbon Steel |
| Maximum Towing Capacity | 200 pounds |
| Model Number | Y60-81000-23-26 |
Listed on Amazon as: Ohuhu Bolt-on RV Bumper Hitch Receiver Adapter Fits 4-4.5" Beam Black
View on Amazon
#6
6. Fioracl Adjustable Hitch
- Maximum Towing Capacity: 3500 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Trailer
Best for: Adjustable-beam accessory mounting.
Why it ranks #6: Its adjustable design is described for different beam widths and heights, and it provides a 2-inch opening; the listing gives a 3,500-pound maximum capacity.
An adjustable locking design sets the Fioracl apart for RV owners whose steel bumper beams vary in width or height. Its stated range covers 2.5-to-4-inch beams, and its 2-inch receiver opening accommodates many bike racks, cargo carriers, hitch steps, and other matching accessories.
The adjustment function is described as tightening around different steel-beam dimensions and locking the beam to reduce movement, which can help with varied bumper profiles. A standard 2-by-2-inch receiver opening accepts many listed accessories with compatible shanks. The alloy-steel construction and 3,500-pound maximum towing capacity are also supplied specifications, but the listing presents this as an RV bumper accessory receiver. Confirm that the beam dimensions fall within the stated range and respect the lowest-rated component.
- Adjustable for 2.5-to-4-inch beams
- Locking adjustment intended to reduce beam movement
- 2-by-2-inch opening for compatible accessories
- Alloy-steel construction
- The stated beam range ends at 4 inches.
Skip it if you have a 4-to-4.5-inch beam; the Nilight 92116B is specified for that wider range.
Consider the Fioracl if your bumper beam falls within its adjustable 2.5-to-4-inch range and you want to mount compatible RV accessories. Its listed adjustment does not extend to beams wider than four inches.
Full product details
| Brand | Fioracl |
|---|---|
| Compatible with Vehicle Type | Trailer |
| Item Weight | 4.7 kg |
| Manufacturer | Fioracl |
| Part Number | BXGLJQ2 |
| Material | Alloy Steel |
| Maximum Towing Capacity | 3500 pounds |
| Model Number | 0442b2a0-e3fb-494b-bc49-3f8ce75f491c |
Listed on Amazon as: RV Bumper Hitch Receiver 2 inch Adapter for 2.5 inch to 4 inch Beams, Trailer Hitch Receiver, Fits for Cargo Carrier Bike Racks
View on Amazon
#7
7. Outus 2-Inch Receiver
- Material: Alloy Steel
- Compatible with Vehicle Type: RV
Best for: Adjustable-hole bumper installation.
Why it ranks #7: Slotted mounting holes accommodate center distances up to 11.6 inches, and the package lists a pin and mounting hardware; no capacity rating is supplied.
Slotted mounting holes with center distances up to 11.6 inches give the Outus receiver a flexible bolt-on installation layout for RV, camper, and truck travel-trailer bumpers. Its standard 2-inch opening supports compatible bike racks, cargo carriers, luggage racks, and spare-tire mounts.
The adjustable slots, listed at 2.36 by 1.26 inches with center distances up to 11.6 inches, help accommodate different mounting layouts without extra modification according to the product description. A 2-by-2-inch receiver opening supports the listed accessory types, while the alloy-steel body and weather-resistant coating are presented for outdoor use. The included hitch pin, clip, and fasteners provide mounting hardware. The listing gives no tongue-weight rating, so it does not establish a load limit.
- Slotted mounting holes adjust up to 11.6-inch center distance
- 2-inch receiver for listed accessory types
- Alloy-steel construction with weather-resistant coating
- Includes hitch pin, clip, and fasteners
- No tongue-weight rating is supplied in the listing.
Skip it if you require a stated tongue-weight limit before selecting an accessory load; this listing provides no such rating.
The Outus may suit owners needing adjustable mounting slots and included fasteners for a compatible bumper accessory setup. Its listing does not state a tongue-weight rating, so buyers who need that figure should choose accordingly.
Full product details
| Brand | Outus |
|---|---|
| Compatible with Vehicle Type | RV |
| Included Components | Bumper hitch receiver, Hitch pin with clip, Hex bolts with nuts and washers |
| Item Weight | 15.4 pounds |
| Manufacturer | Outus |
| Part Number | JUI-Outus-3191 |
| Material | Alloy Steel |
| Model Number | JUI-Outus-3191 |
Listed on Amazon as: Outus 2" RV Bumper Hitch Receiver with 5/8" Pin, Bolt-On Trailer Mount
View on Amazon
#8
8. Stromberg Carlson CC-300
- Material: Alloy Steel
- Compatible with Vehicle Type: Car, Trailer
Best for: Frame-mounted trailer accessory hitch.
Why it ranks #8: Creates a 2-inch accessory hitch on travel trailers and fifth wheels, with bolt-on Class I or welded Class II installation; listed capacity is not provided.
The Stromberg Carlson CC-300 creates a 2-inch hitch on travel trailers and fifth wheels, with a choice of bolting it on as Class I or welding it on as Class II. That frame-mounted approach gives owners an accessory option beyond a bumper-clamped receiver.
The frame attachment distinguishes this hitch from bumper adapters and gives buyers two listed installation routes: bolt-on Class I or welded Class II. Its 2-inch receiver is intended for bike racks and cargo carriers, letting compatible accessories mount at the back of a travel trailer or fifth wheel. Alloy-steel construction is specified, and the 46.9-pound listed weight is relevant when planning handling and installation. Select the mounting method and frame arrangement that suit the trailer; the listing does not provide a load rating.
- Creates a 2-inch hitch on travel trailers and fifth wheels
- Can be bolted on as Class I
- Can be welded on as Class II
- Listed for bike racks and cargo carriers
- The listing provides no towing or tongue-weight capacity.
Skip it if you need a stated load rating before choosing a rack or carrier; the CC-300 listing supplies no capacity figure.
This Stromberg Carlson fits trailer owners seeking a frame-mounted 2-inch accessory hitch and willing to choose between bolt-on and welded installation. The listing gives no capacity figure, so it cannot guide load selection.
Full product details
| Brand | Stromberg Carlson |
|---|---|
| Compatible with Vehicle Type | Car, Trailer |
| Included Components | Stromberg Carlson Product CC-300 Accessory Hitch Adjustable |
| Item Weight | 46.9 pounds |
| Manufacturer | Stromberg Carlson Products, Inc. |
| Part Number | CC-300 |
| Manufacturer Warranty Description | Please contact us if you experience any issues within 30 days of receipt. |
| Material | Alloy Steel |
| Model Number | CC-300 |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |

#9
9. Quick Products QP-HS5839
- Maximum Towing Capacity: 500 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Car, Truck
Best for: Four-hole receiver-tube replacement.
Why it ranks #9: This four-hole bolt-on receiver tube accepts 2-inch receivers and has a 500-pound tongue rating, but its listed compatible vehicle types are car and truck.
A four-hole mounting pattern gives the Quick Products QP-HS5839 a specific bolt-on configuration, while its 2-inch receiver opening accepts matching receiver tubes. The 5/8-inch pin hole supports a standard-size hitch pin, making it a straightforward receiver-tube choice when the mounting arrangement matches the vehicle or hitch plate.
The four-hole pattern determines the bolt-up interface, so this receiver suits buyers whose existing mounting surface matches that layout. Its 2-inch receiver size and 5/8-inch pin hole accommodate compatible receiver accessories and pins. Alloy-steel construction and a black powder-coat finish are listed, while the 500-pound tongue rating gives a stated load limit to consider for the intended setup. Mounting hardware is not included, so installation requires sourcing the bolts separately.
- Four-hole mounting pattern
- Fits 2-inch receiver tubes
- 5/8-inch hitch-pin hole
- 500-pound tongue-weight rating
- Mounting hardware is not included.
Skip it if you need included installation bolts or a receiver specified for an RV square bumper; this tube does not include mounting hardware.
Choose the Quick Products tube when a four-hole mounting surface and 2-inch receiver are the right match for your vehicle or hitch plate. Its mounting hardware must be supplied separately, and the listed rating is 500 pounds.
Full product details
| Brand | Quick Products |
|---|---|
| Compatible with Vehicle Type | Car, Truck |
| Included Components | Quick Products QP-HS5839 Bolt-On Receiver Tube – 2", Black |
| Item Weight | 7 pounds |
| Manufacturer | Quick Products |
| Part Number | QP-HS5839 |
| Material | Alloy Steel |
| Maximum Towing Capacity | 500 pounds |
| Model Number | QP-HS5839 |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: Quick Products QP-HS5839 Bolt-On Receiver Tube – 2", Black
View on Amazon
#10
10. Buyers Products 1804055
- Material: Carbon Steel
- Compatible with Vehicle Type: Trailer, Truck
Best for: Pintle-plate towing switchovers.
Why it ranks #10: It is for hitch plates with standard pintle-hook hole patterns, not a travel-trailer bumper; its 2-inch receiver and 20,000-pound towing rating serve a different setup.
The Buyers Products receiver bolts to hitch plates with standard pintle-hook hole patterns, enabling operators to switch between pintle-hook and ball-hitch towing without replacing the entire hitch setup. Its 2-inch receiver opening also accepts standard 2-inch receiver accessories, making it a plate-mounted option for mixed-duty truck or trailer equipment.
For fleets that already use a compatible hitch plate, the standard pintle-pattern bolt-on attachment can change the hitch configuration without swapping the whole assembly. The 2-inch receiver opening supports matching receiver accessories, while the listed 20,000-pound towing rating identifies its stated capacity. Carbon-steel construction and an 8-pound listed weight describe the receiver itself. This product is a hitch-plate receiver tube, not a bumper-specific RV adapter, so the mounting pattern is central to its fit.
- Bolts to standard pintle-hook hole patterns
- Enables switching between pintle and ball hitch setups
- Accepts 2-inch receiver accessories
- Listed 20,000-pound towing rating
- Requires a hitch plate with a standard pintle-hook hole pattern.
Skip it if you need a clamp-on RV bumper mount; this receiver bolts to a hitch plate instead.
Pick this Buyers Products receiver when a truck or trailer already has a compatible pintle-pattern hitch plate and the job calls for switching hitch types. It is not a bolt-on square-bumper receiver for a travel trailer.
Full product details
| Brand | Buyers Products Company |
|---|---|
| Compatible with Vehicle Type | Trailer, Truck |
| Included Components | Receiver Mount |
| Item Weight | 8 pounds |
| Manufacturer | Buyers Products |
| Part Number | 1804055 |
| Manufacturer Warranty Description | 1 year, no labor |
| Material | Carbon Steel |
| Model Number | 1804055 |
Listed on Amazon as: Buyers Products 1804055 2 Inch Bolt-On Receiver Tube for Hitch Plates
View on AmazonWhy a Receiver Rating Does Not Prove Towing Suitability
A listed capacity on an RV bumper receiver does not by itself mean the hitch is safe for towing a trailer. The product data makes this distinction explicit: Ohuhu says its 200-pound-capacity hitch is not intended for towing, and MaxxHaul likewise cautions against RV-level trailer towing. TOPTOW lists a 3,500-pound capacity but also warns that the receiver is not intended for that purpose.
Nilight describes its 92123B as a way to carry an RV-approved hitch-mounted rack and says the applicable limit is the lowest-rated towing component. Treat these products as accessory mounts unless the manufacturer confirms otherwise for your exact setup.
A rack or carrier also applies load behind the bumper, so its actual suitability depends on the trailer bumper and installation—not just the receiver’s published number. Confirm permissible use with the trailer and hitch manufacturers before towing or loading an accessory.
Measure the Bumper Before Choosing a Bolt-On Receiver
A receiver that has the right 2-inch opening can still be incompatible with the trailer’s bumper. The products here specify different fit conditions: Ohuhu is for 4-to-4.5-inch bumpers and requires 2-by-2-inch square tubes, while MaxxHaul fits a 4-inch square bumper and Nilight 92123B is designed for 4-by-4-inch square RV bumpers. The Fioracl listing instead describes adjustment for different beam widths and heights.
Outus uses slotted mounting holes with center distances up to 11.6 inches, but that detail does not guarantee compatibility with every bumper. Measure the bumper’s dimensions and inspect the installation area, including clearance: Ohuhu calls for at least 1 inch between bumper and trailer.
Do not assume a universal-looking design can safely clamp to any bumper; verify the stated fit and mounting requirements before ordering.
How to Choose a Travel Trailer Receiver Hitch
Bumper Dimensions and Mounting Style
Look first for a receiver whose stated mounting dimensions match your travel trailer’s bumper. The listed bumper-fit range includes 4-inch square designs, such as MaxxHaul 50173 and Nilight 92123B, and 4-to-4.5-inch options such as Nilight 92116B and Ohuhu Y60-81000-Ohuhu additionally specifies 2-by-2-inch square tubes and at least 1 inch of clearance from the trailer.
Fioracl describes adjustment for varying beam widths and heights, while Outus lists slotted holes with center distances up to 11.6 inches. A buyer with a measured, standard 4-by-4-inch bumper can favour a directly specified fit; someone with unusual beam dimensions should verify adjustable mounting details rather than assume compatibility.
Capacity and Intended Use
Choose a receiver based on its stated capacity and permitted use, not its largest number alone. The bumper products list tongue capacities from 200 pounds on Ohuhu, MaxxHaul, and Nilight 92116B to 350 pounds on Nilight 92123B and TOPTOW TTRV801; Nilight 92123B also lists 3,500 pounds gross trailer weight. These figures do not make an accessory receiver appropriate for towing: Ohuhu and MaxxHaul explicitly warn against towing, and TOPTOW also says it is not intended for RV-level trailer towing.
For carrying a rack or carrier, check its loaded weight against every applicable component limit. Buyers needing actual trailer towing should verify an approved hitch system for their trailer rather than rely on a bumper adapter’s capacity figure.
Receiver Opening and Included Installation Parts
Match the receiver opening to the accessory shank, then check whether the pin and mounting hardware are included. Several bumper models—including Nilight 92123B, TOPTOW TTRV801, and MaxxHaul 50173—offer a 2-by-2-inch opening for common 2-inch-shank accessories. Ohuhu lists a hitch pin and cover, and Outus lists a pin, clip, bolts, nuts, and washers.
By contrast, Quick Products QP-HS5839 specifies a 5/8-inch pin hole but says mounting hardware is not included; TOPTOW says its hitch pin or lock is not included. A buyer who already has compatible hardware may be comfortable with a simpler receiver tube, while someone wanting listed fasteners should favour a product whose package explicitly includes them.
Which Receiver Hitch Fits My Travel Trailer?
For a 4-by-4-inch RV bumper and a rack or carrier, choose Nilight 92123B first: it has a 2-inch receiver and the highest stated tongue rating among the bumper adapters tied to that fit. TOPTOW TTRV801 is another 4-by-4-inch option with a 350-pound tongue rating, but its pin is not included. For a 4-to-4.5-inch beam, Nilight 92116B lists a 200-pound tongue rating; Ohuhu Y60-81000-23 is an alternative if the required 2-by-2-inch tube and clearance conditions match.
Consider Fioracl Adjustable Hitch when beam dimensions vary, but verify its fit and load limits. For frame installation, Stromberg Carlson CC-300 is the travel-trailer-specific option.
Do not select Buyers Products 1804055 for a bumper mount, or use an accessory receiver for towing without manufacturer approval.
Related Buying Guides
- Best Trailer Hitch Receiver
- Best Hitch For Travel Trailer
- Best Trailer Hitch Receiver Lock
- Best Universal Trailer Hitch Receiver
- Best Travel Trailer Hitch Lock
- Best Tow Hitch For Travel Trailer
Frequently Asked Questions
How do I check whether my travel trailer bumper can support a bolt-on receiver and its accessory?
Check the bumper’s dimensions, construction, and load rating in the trailer documentation, then confirm that the receiver fits and is approved for that bumper. Include the accessory and everything carried when assessing load, and follow the lowest-rated component’s limit. If the bumper’s capacity or approval is unclear, ask the trailer manufacturer before installation.
Can I tow a trailer with an RV bumper-mounted receiver hitch?
Only if the receiver, bumper, and trailer manufacturers explicitly approve that specific towing use. A listed tongue-weight or gross-trailer-weight figure does not by itself establish suitability for towing a travel trailer. Some bumper receivers are intended for approved racks or carriers, so confirm the intended use and every applicable rating before towing.
How much weight can a bike rack or cargo carrier add to a travel trailer bumper?
Count the rack or carrier’s weight together with the bikes or cargo it holds; that combined load is what the bumper-mounted setup must support. Check the limits for the bumper, receiver, and accessory, and obey the lowest rating. Do not assume that a receiver’s stated tongue rating alone confirms the bumper can carry the load.
What measurements should I check before choosing a bumper receiver?
Measure the bumper or beam where the receiver will attach, and compare its dimensions with the product’s stated fit range. Also check the receiver opening size and whether the installation requirements match your bumper. A receiver that appears close in size is not necessarily a compatible fit; verify the product instructions before buying or installing it.
When should I consider a frame-installed hitch instead of a bumper receiver?
Consider a frame installation when the bumper’s fit, strength, or approval for the intended accessory cannot be confirmed. The Stromberg Carlson CC-300 is identified as a travel-trailer-specific frame-installation option. Still, verify that it fits your trailer and follow its manufacturer’s instructions and load limits; a frame-mounted hitch is not automatically approved for every use.
Final Words
For a rack or carrier on a 4-by-4-inch RV bumper, Nilight 92123B is the leading choice in this lineup, provided the bumper fit and all load limits check out. For other beam sizes, compare the listed fit ranges and ratings rather than choosing by appearance. Consider the Stromberg Carlson CC-300 for frame installation.
Do not treat accessory-hitch ratings as approval to tow a travel trailer.


