Best Aluminum Ramps For Atv: Compare 10 Loading Options

Best Aluminum Ramps For Atv

A strong ATV ramp choice provides a rated capacity that covers the machine, enough length for your loading height, and a layout that matches its wheels. The VEVOR 7.5ft Aluminum Ramps stand out for pickup and trailer loading with a two-ramp setup, 89-inch length, 1,500-pound pair rating, and included safety strap. The products here range from narrow, folding pairs to wide tri-fold platforms, plus shorter ramps with higher stated capacities.

Those formats are not interchangeable: a wide platform suits a different approach than two separate tracks, and a short ramp has a more limited recommended loading height. Compare the actual dimensions and pair or total capacity with your ATV and vehicle before choosing.

The guide below also highlights fit and setup details that specifications alone can obscure.

The VEVOR 7.5ft Aluminum Ramps are the leading choice for typical ATV loading because the pair is designed for ATVs and UTVs, measures 89 by 12 inches per ramp, and is rated for 1,500 pounds per pair. It folds to 45.7 by 12 inches and includes a safety strap. Check that your ATV’s weight is within the pair rating, distribute the load across both ramps, and confirm the length suits your truck or trailer loading height.

Our Top Picks

VEVOR 7.5ft Aluminum RampsBest Overall

VEVOR 7.5ft Aluminum Ramps

The 89-inch pair is made for ATVs and UTVs, carries 1,500 pounds combined, folds to 45.7 inches, and includes a safety strap.

View on Amazon
VENDAV Folding Aluminum RampsBest Wheel Path

VENDAV Folding Aluminum Ramps

Two 89-inch ramps are designed for dual-track ATV and UTV loading, with an approximately 11-inch wheel path and 1,500-pound pair rating.

View on Amazon
MAXIVAMN Aluminum ATV RampsLong Ramp Pair

MAXIVAMN Aluminum ATV Ramps

Each of the two ramps measures 89 by 12 inches, folds for storage, and contributes to a stated 1,500-pound pair capacity.

View on Amazon

Compare ATV Ramp Options by Fit and Layout

#ProductDimensionsWeightLoad CapacityMaterialBuy
112"L x 2"W x 89"H32 lb1500 lbAluminumView on Amazon
289"L x 12"W x 1.9"H34 lb1500 lbAluminumView on Amazon
389"L x 12"W x 2"H14.4 kg1500 lbAluminumView on Amazon
4
gardhom Aluminum Truck Ramps4. gardhom Aluminum Truck RampsHighest Pair Capacity
89.8"L x 11"W x 2"H46.6 lb3000 lbAluminumView on Amazon
52.4"L x 1.9"W x 84"H30 lb1500 lbAluminumView on Amazon
6
KROAK Ultra-Wide Tri-Fold Ramp6. KROAK Ultra-Wide Tri-Fold RampWide-platform mower and ATV loading
90"L x 12"W x 12"H32.1 lb1800 lbAluminumView on Amazon
7
YITAMOTOR Tri-Fold Aluminum Ramp7. YITAMOTOR Tri-Fold Aluminum RampOne-person wide-ramp handling
69"L x 44"W x 2"H31.2 lb1500 lbAluminumView on Amazon
8
GarveeTech Tri-Fold Ramp8. GarveeTech Tri-Fold RampWide-platform ATV loading
76.38"L x 49.61"W x 1.97"H38.7 lb1500 lbAluminumView on Amazon
9
VEVOR 60-Inch Aluminum Ramps9. VEVOR 60-Inch Aluminum RampsHigh-capacity short-ramp users
60"L x 12"W x 2.36"H30 lb6000 lbAluminumView on Amazon
10
Ruedamann 4Ft Truck Ramps10. Ruedamann 4Ft Truck RampsShort-height heavy-load ramps
48.2"L x 13.4"W x 2.8"H19.4 lb4400 lb/pairAluminumView on Amazon

Detailed Reviews: Best Aluminum Ramps For Atv

VEVOR 7.5ft Aluminum Ramps

#1 · Best Overall

1. VEVOR 7.5ft Aluminum Ramps

  • Dimensions: 12"L x 2"W x 89"H
  • Weight: 32 lb
  • Load Capacity: 1500 lb
  • Material: Aluminum

Best for: Quick-fold dual-ramp hauling.

Why it ranks #1: The 89-inch pair is made for ATVs and UTVs, carries 1,500 pounds combined, folds to 45.7 inches, and includes a safety strap.

VEVOR’s 89-by-12-inch aluminum pair folds to 45.7 by 12 inches per ramp, enabling dual-track loading with a shorter folded storage length. The pair is rated for 1,500 pounds, with each ramp rated at 750 pounds, and the set includes a safety strap with hook.

The two ramps suit ATVs, UTVs, bikes, motorcycles, and lawn mowers when positioned to match the equipment’s wheel spacing. The quick-fold design is described as opening or folding in one second, which can streamline setup and put-away. A safety strap with hook is included alongside gloves, a reflective sticker, and a user manual. Keep the stated 750-pound per-ramp rating in mind; the pair’s 1,500-pound capacity assumes appropriate distribution.

Pros
  • Pair rated for 1,500 pounds total
  • 89-inch ramp length
  • Folds to 45.7 by 12 inches per ramp
  • Includes a safety strap with hook
Cons
  • The pair’s 1,500-pound rating means 750 pounds per ramp.

Skip it if you need a single wide loading surface; GarveeTech’s 76-by-50-inch tri-fold ramp provides one platform.

Choose this VEVOR set for pickup or trailer loading where two wheel paths and quick folding fit your workflow. The 750-pound per-ramp limit and need to position the pair for your equipment matter.

Full product details
BrandVEVOR
ColorSilver
Included Components1 x Pair of Gloves, 1 x Reflective Sticker, 1 x Safety Strap with Hook, 1 x User Manual, 2 x Aluminum Ramps
Dimensions12"L x 2"W x 89"H
Item Weight32 pounds
Load Capacity1500 pounds
ManufacturerVEVOR
Part Number1500 lbs Folding Loading Ramps
Manufacturer Warranty DescriptionNone.
MaterialAluminum
Model NumberATV-002-1

Listed on Amazon as: VEVOR 7.5ft Aluminum Ramps, 1500 lbs Folding Loading Ramps (2 pcs Set) for Pickup Trucks Bed, Trailers Ramp with Load Straps for Dirt Bike, UTV, ATV, Trucks, Lawn Mowers, Cargo Trailer, 89" L x 12" W

View on Amazon
VENDAV Folding Aluminum Ramps

#2 · Best Wheel Path

2. VENDAV Folding Aluminum Ramps

  • Dimensions: 89"L x 12"W x 1.9"H
  • Weight: 34 lb
  • Load Capacity: 1500 lb
  • Material: Aluminum

Best for: Dual-track pickup loading.

Why it ranks #2: Two 89-inch ramps are designed for dual-track ATV and UTV loading, with an approximately 11-inch wheel path and 1,500-pound pair rating.

VENDAV’s pair provides two 89-inch ramps with an approximately 11-inch wheel path between the side rails on each ramp, enabling dual-track loading of ATVs, UTVs, and other wheeled equipment. The pair is rated for 1,500 pounds when the load is evenly distributed.

Position the two ramps to match the vehicle’s wheel spacing, then center each tire within its ramp’s stated wheel path. That arrangement makes the set suitable for pickup trucks or trailers and for equipment ranging from four-wheelers to riding mowers and garden tractors. Each 12-inch-wide ramp is rated for up to 750 pounds, so the listed combined capacity assumes even distribution. The folding aluminum format also supports carrying and storage between loading tasks.

Pros
  • Pair capacity rated up to 1,500 pounds
  • 89-inch ramps for dual-track loading
  • Approximately 11-inch wheel path between side rails
  • Listed for ATVs, UTVs, mowers, and garden tractors
Cons
  • Each ramp is limited to 750 pounds when the pair is loaded evenly.

Skip it if you need a single broad platform instead of paired wheel tracks; GarveeTech’s 76-by-50-inch tri-fold ramp has a one-piece surface.

This VENDAV set suits ATV and UTV owners loading into pickups or trailers who can align two ramps with the wheel spacing. Keep its per-ramp rating and even load distribution in mind.

Full product details
BrandVENDAV
ColorSilver
Dimensions89"L x 12"W x 1.9"H
Item Weight34 pounds
Load Capacity1500 Pounds
ManufacturerVENDAV
Part NumberVEVR002
MaterialAluminum
Model NumberFor 4-Wheel Vehicles (2 Pc)

Listed on Amazon as: ATV Ramps for Pickup Trucks, 7.5 ft Folding Aluminum Loading Ramps, 2 Pack

View on Amazon
MAXIVAMN Aluminum ATV Ramps

#3 · Long Ramp Pair

3. MAXIVAMN Aluminum ATV Ramps

  • Dimensions: 89"L x 12"W x 2"H
  • Weight: 14.4 kg
  • Load Capacity: 1500 lb
  • Material: Aluminum

Best for: Everyday ATV and mower loading.

Why it ranks #3: Each of the two ramps measures 89 by 12 inches, folds for storage, and contributes to a stated 1,500-pound pair capacity.

The MAXIVAMN pair combines two 89-inch aluminum ramps with a 1,500-pound combined rating, giving wheeled equipment a dual-track route into a pickup or trailer. Its two-ramp arrangement suits ATVs, UTVs, riding mowers, and garden tractors when you can set the spacing to match the wheel track.

Each ramp is 12 inches wide and rated for up to 750 pounds, so the pair’s 1,500-pound rating depends on even load distribution and proper positioning. Matching the ramp spacing to the vehicle’s wheel track helps keep each tire centered during loading. The 89-inch length provides the specified ramp run, while the folding design supports storage between jobs. Check the equipment’s total weight against the pair rating before loading.

Pros
  • Pair rated for 1,500 pounds total
  • Each ramp measures 89 by 12 inches
  • Folding construction supports storage
  • Suitable for ATVs, UTVs, mowers, and garden tractors
Cons
  • Each ramp is rated for 750 pounds, so the load must be distributed evenly.

Skip it if you need a single wide platform rather than two separate wheel paths; GarveeTech’s 76-by-50-inch tri-fold ramp offers one broad surface.

Choose this pair for pickup or trailer loading of wheeled ATVs, UTVs, and yard equipment when dual tracks suit your vehicle. Keep the 1,500-pound combined rating and even weight distribution in view.

Full product details
BrandMAXIVAMN
ColorAluminum Bi-fold Ramp
Dimensions89"L x 12"W x 2"H
Item Weight14.4 kg
Load Capacity1500 pounds
ManufacturerMAXIVAMN
Part NumberMAXIVMAN-001-2PC
MaterialAluminum
Model NumberAluminum Bi-Fold Ramp

Listed on Amazon as: Loading Ramps for Pickup Trucks, 7.5 ft Aluminum ATV Ramps, 2 Pack

View on Amazon
gardhom Aluminum Truck Ramps

#4 · Highest Pair Capacity

4. gardhom Aluminum Truck Ramps

  • Dimensions: 89.8"L x 11"W x 2"H
  • Weight: 46.6 lb
  • Load Capacity: 3000 lb
  • Material: Aluminum

Best for: Fold-away ATV and mower ramps.

Why it ranks #4: The 89.8-inch pair is listed at 3,000 pounds combined and is intended for ATVs, quads, and lawn mowers.

gardhom’s ramps fold from 89.8 inches to 45.7 inches, making a long loading pair easier to store between ATV, motorcycle, or mower jobs. The listing gives the pair a 3,000-pound capacity and allows one ramp for dirt bikes or motorcycles and two for four-wheel equipment.

Use one ramp for a dirt bike or motorcycle, or position both for an ATV, quad, or lawn mower. The product listing rates each ramp at up to 1,500 pounds and the pair at 3,000 pounds, so match the loading arrangement to the equipment and observe the capacity. At 11.5 inches wide, each ramp provides a defined path; folding to 45.7 inches helps reduce storage length after use.

Pros
  • Pair capacity listed at 3,000 pounds
  • Folds from 89.8 to 45.7 inches
  • Can be used singly or as a pair
  • Listed for motorcycles, ATVs, quads, and mowers
Cons
  • Each ramp measures 11.5 inches wide, narrower than the 12-inch pairs.

Skip it if you want a wider individual ramp path; VENDAV’s ramps are listed at 12 inches wide.

This set fits owners who want foldable ramps for mixed motorcycle and ATV or mower loading. Its single-ramp option adds flexibility, while the 11.5-inch width and listed load limits remain important boundaries.

Full product details
Brandgardhom
ColorSilver
Dimensions89.8"L x 11"W x 2"H
Item Weight46.6 pounds
Load Capacity3000 pounds
Part Number2LR001
MaterialAluminum
Model NumberSilver

Listed on Amazon as: 2PCS 7.5' Aluminum Truck Ramps, ATV UTV Loading Ramps for Pickup

View on Amazon
Bonnlo 7ft Aluminum Ramps

#5 · Strap-Secured Pair

5. Bonnlo 7ft Aluminum Ramps

  • Dimensions: 2.4"L x 1.9"W x 84"H
  • Weight: 30 lb
  • Load Capacity: 1500 lb
  • Material: Aluminum

Best for: Strapped seven-foot ramp pair.

Why it ranks #5: These 84-inch folding ramps are listed for ATV and trailer use, with a 1,500-pound capacity, adjustable straps, and rubber fingers.

Bonnlo’s 7-foot aluminum pair combines rubber fingers with adjustable straps, helping keep ramps positioned during loading and unloading. The two-ramp set is rated for 1,500 pounds and is listed for pickup trucks, trailers, ATVs, UTVs, motorcycles, and dirt bikes.

The rubber fingers are specified to help prevent slipping, while adjustable straps secure the ramps in place; those features address stability at the truck or trailer during a loading job. At 84 inches long, the pair offers a 7-foot ramp length, and the aluminum construction is described as lightweight and sturdy. The listed 1,500-pound capacity applies to the set, so weigh the equipment against that overall figure when deciding whether this pair suits the load.

Pros
  • Pair capacity listed at 1,500 pounds
  • 84-inch, 7-foot ramp length
  • Rubber fingers help prevent slipping
  • Adjustable straps secure the ramps
Cons
  • The listing gives a 1,500-pound capacity for the pair, not each ramp.

Skip it if you need a longer 89-inch ramp pair; VEVOR’s 7.5-foot set provides that listed length.

Bonnlo suits buyers wanting a 7-foot aluminum pair with rubber fingers and securing straps for ATV, UTV, or motorcycle loading. Its 1,500-pound pair rating is the main capacity boundary.

Full product details
BrandBonnlo
ColorSilver
Dimensions2.4"L x 1.9"W x 84"H
Item Weight30 pounds
Load Capacity1500 pounds
ManufacturerBonnlo
MaterialAluminum
Model Numberramp123 7ft (2pcs)

Listed on Amazon as: Bonnlo 7ft Aluminum Truck Ramps, 1500lbs Capacity (2pcs), Portable & Folding kit, Motorcycle Ramps with Straps for Pickup Trucks, Loading Ramp for ATV Trailer/UTV/Dirt Bike

View on Amazon
KROAK Ultra-Wide Tri-Fold Ramp

#6

6. KROAK Ultra-Wide Tri-Fold Ramp

  • Dimensions: 90"L x 12"W x 12"H
  • Weight: 32.1 lb
  • Load Capacity: 1800 lb
  • Material: Aluminum

Best for: Wide-platform mower and ATV loading.

Why it ranks #6: Its 54-inch-wide tri-fold platform provides a different, broad loading surface and a stated 1,800-pound capacity for ATVs and UTVs.

KROAK’s 54-inch-wide tri-fold platform provides a lane-like surface for steering riding mowers, large ATVs, or compact tractors onto a pickup or trailer. The aluminum ramp is rated for 1,800 pounds and measures 77 by 54 inches, pairing broad access with a folding format.

The unusually wide 54-inch platform is intended to reduce steering corrections while loading the listed larger equipment, making it a different approach from separate wheel-track ramps. Its 1,800-pound total rating gives the ramp a stated capacity above the 1,500-pound wide-platform options here. A non-slip surface and safety straps are specified for loading stability, while the tri-fold design supports compact storage. Consider the stated 77-inch length as part of the loading setup.

Pros
  • 54-inch-wide single platform
  • Stated capacity of 1,800 pounds
  • Tri-fold design for compact storage
  • Non-slip surface and safety straps
Cons
  • The 77-inch length is shorter than the 89-inch paired ramps.

Skip it if you need a longer paired-ramp approach; MAXIVAMN’s ramps measure 89 inches long.

This KROAK ramp fits buyers loading wide equipment who prefer one broad platform and value the stated 1,800-pound capacity. Its 77-inch length and single-platform format are key fit considerations.

Full product details
BrandKROAK
ColorSilver
Dimensions90"L x 12"W x 12"H
Item Weight32.1 pounds
Load Capacity1800 Pounds
ManufacturerKROAK
Part Number1800Lbs
MaterialAluminum
Model NumberTri‐Fold Wide (1800 lbs)

Listed on Amazon as: 77" x 54" Ultra-Wide Tri-Fold Aluminum Loading Ramp, 1800 lbs Capacity Heavy Duty Ramps for Pickup Truck & Trailer, Fits ATV UTV Lawn Mower Tractor, with Non-Slip Surface & Safety Straps

View on Amazon
YITAMOTOR Tri-Fold Aluminum Ramp

#7

7. YITAMOTOR Tri-Fold Aluminum Ramp

  • Dimensions: 69"L x 44"W x 2"H
  • Weight: 31.2 lb
  • Load Capacity: 1500 lb
  • Material: Aluminum

Best for: One-person wide-ramp handling.

Why it ranks #7: The 69-by-44-inch tri-fold ramp weighs 31.2 pounds, folds to one-third size, and has a 1,500-pound total capacity.

YITAMOTOR’s 69-by-44-inch tri-fold aluminum ramp weighs 31.2 pounds and is listed as easy for one person to carry, helping simplify transport and setup. It folds to 69 by 14.6 inches and carries a stated 1,500-pound total capacity for ATV and UTV loading.

The 44-inch width provides a single broad surface, while the tri-fold design reduces the folded width to 14.6 inches for storage and transport. Its stated capacity is 1,500 pounds overall, with 500 pounds per section, so the loading limit applies across the ramp rather than per vehicle wheel. The corrosion-resistant extruded aluminum alloy is identified as its construction material, and the listed 31.2-pound weight gives a concrete carrying figure for handling.

Pros
  • 69-by-44-inch unfolded dimensions
  • Folds to 69 by 14.6 inches
  • Weighs 31.2 pounds
  • Stated 1,500-pound capacity with 500 pounds per section
Cons
  • The stated 500-pound rating is per section, not per ramp as a whole.

Skip it if you need a longer, two-ramp wheel-track setup; VENDAV’s paired ramps measure 89 inches long.

This YITAMOTOR ramp suits ATV and UTV owners seeking a folding single platform that one person can carry. Account for the 1,500-pound total limit and 500-pound-per-section rating when selecting it.

Full product details
BrandYITAMOTOR
ColorSilver
Dimensions69"L x 44"W x 2"H
Item Weight31.2 pounds
Load Capacity1500 Pounds
ManufacturerYITAMOTOR
Part NumberMAYIMfR0be
MaterialAluminum
Model NumberMAYIMfR0be

Listed on Amazon as: YITAMOTOR 1500lbs 69"x44" Tri-Fold Aluminum Ramp with Treads

View on Amazon
GarveeTech Tri-Fold Ramp

#8

8. GarveeTech Tri-Fold Ramp

  • Dimensions: 76.38"L x 49.61"W x 1.97"H
  • Weight: 38.7 lb
  • Load Capacity: 1500 lb
  • Material: Aluminum

Best for: Wide-platform ATV loading.

Why it ranks #8: This 76-by-50-inch single ramp folds to one-third size and is listed for ATVs and UTVs, with a 1,500-pound total capacity.

GarveeTech’s 76-by-50-inch tri-fold ramp provides a single broad loading surface, enabling a rider to guide equipment across one platform rather than align two separate ramps. Its aluminum construction has a stated 1,500-pound total capacity, and the ramp folds to one-third of its size for transport or storage.

The 50-inch-wide surface offers a broad path for the listed ATVs, UTVs, motorcycles, tractors, lawnmowers, and snow blowers. Treads are specified in the title, giving the platform a surfaced route for loading. At 76 inches long, it is shorter than the 89-inch paired ramps in this roundup, so length should factor into your loading setup. Its tri-fold format reduces the ramp to one-third size, and load straps are included in the product description.

Pros
  • Single platform measures about 76 by 50 inches
  • Stated total capacity of 1,500 pounds
  • Tri-folds to one-third of its size
  • Load straps included in the description
Cons
  • The stated 1,500-pound capacity applies to the entire ramp.

Skip it if you need two separate ramps with a listed 3,000-pound pair capacity; gardhom’s 7.5-foot pair is rated for that total.

Pick this ramp if a single wide surface and compact tri-fold storage suit your ATV or yard-equipment loading routine. Its 1,500-pound total rating and 76-inch length are central fit considerations.

Full product details
BrandGarveeTech
ColorSilver-
Dimensions76.38"L x 49.61"W x 1.97"H
Item Weight38.7 pounds
Load Capacity1500 pounds
ManufacturerGarveeTech
Part NumberC0BQwq5bJxJ7hjh1qVhFTAIId11H
MaterialAluminum
Model NumberC0BQwq5bJxJ7hjh1qVhFTArl7O1l

Listed on Amazon as: Aluminum Tri-Fold Ramp with Treads, Ramps for Pickup Trucks 76"x50"

View on Amazon
VEVOR 60-Inch Aluminum Ramps

#9

9. VEVOR 60-Inch Aluminum Ramps

  • Dimensions: 60"L x 12"W x 2.36"H
  • Weight: 30 lb
  • Load Capacity: 6000 lb
  • Material: Aluminum

Best for: High-capacity short-ramp users.

Why it ranks #9: The two 60-inch ramps are listed for ATVs and UTVs with a 6,000-pound total capacity, but their shorter length may limit loading setups.

VEVOR’s 60-inch aluminum ramp pair carries a stated total capacity of 6,000 pounds, providing a compact-length loading option for vehicles and equipment headed to a truck bed or trailer. Its rungs add a non-slip surface, while the extension plate and adjustable safety straps support positioning.

At 60 inches long and 12 inches wide, these ramps take less length than the 89-inch pairs in this roundup, a useful consideration when the available loading area is limited. The stated 6,000-pound total capacity supports a broad range of listed equipment, including tractors, ATVs, UTVs, motorcycles, and bicycles. Rung-style surfaces increase friction, and the full-width hook attaching end plus adjustable safety straps address ramp stability during loading and unloading.

Pros
  • Stated total capacity of 6,000 pounds
  • 60-inch length and 12-inch width
  • Rung design increases surface friction
  • Full-width hook end and adjustable safety straps
Cons
  • The 60-inch ramp length is shorter than the 89-inch paired options.

Skip it if you need a longer approach for your loading setup; MAXIVAMN’s 89-inch pair offers more ramp length.

Consider this VEVOR pair for buyers prioritizing its stated capacity and 60-inch format for truck-bed or trailer loading. The shorter length is the key boundary when choosing it for a particular loading setup.

Full product details
BrandVEVOR
ColorSilver
Included Components2 x Aluminum Ramps
Dimensions60"L x 12"W x 2.36"H
Item Weight30 pounds
Load Capacity6000 Pounds
ManufacturerVEVOR
Part Number6000 lbs Aluminum Ramps
Manufacturer Warranty DescriptionNone.
MaterialAluminum
Model NumberHeavy-Duty Ramps

Listed on Amazon as: VEVOR Aluminum Ramps, 60" L x 12" W, 2Pcs

View on Amazon
Ruedamann 4Ft Truck Ramps

#10

10. Ruedamann 4Ft Truck Ramps

  • Dimensions: 48.2"L x 13.4"W x 2.8"H
  • Weight: 19.4 lb
  • Load Capacity: 4400 lb/pair
  • Material: Aluminum

Best for: Short-height heavy-load ramps.

Why it ranks #10: The 48.2-inch pair has a 4,400-pound capacity, but its recommended use height is under 13.8 inches, limiting common truck-bed applications.

Ruedamann’s two 48.2-inch aluminum ramps carry a stated combined capacity of 4,400 pounds, offering a heavy-capacity option for loading where the recommended height is under 13.8 inches. Handles support carrying and moving each ramp, while the anti-slip surface helps scrape mud from wheels.

Each ramp measures 48.2 by 13.4 inches, and the listing recommends use at heights under 13.8 inches, making loading height a central fit consideration. Welded panels provide the stated heavy-duty construction, while side protection helps prevent equipment from falling and the surface is specified to scrape mud from wheels. A webbing handle supports carrying and space-saving storage. The 4,400-pound capacity is for the pair, so consider that combined rating when assessing a load.

Pros
  • Pair capacity listed at 4,400 pounds
  • Each ramp measures 48.2 by 13.4 inches
  • Webbing handles aid carrying
  • Side protection and anti-slip surface are specified
Cons
  • The recommended use height is under 13.8 inches.

Skip it if you need a longer ramp for a higher loading point; VEVOR’s 60-inch ramps provide more length.

Consider this Ruedamann pair for buyers needing its stated 4,400-pound combined rating for ATV, UTV, motorcycle, or mower loading. Keep the under-13.8-inch recommended height in mind when choosing.

Full product details
BrandRuedamann
ColorSilver
Dimensions48.2"L x 13.4"W x 2.8"H
Item Weight19.4 pounds
Load Capacity4400 Pounds/pair
ManufacturerRuedamann
MaterialAluminum
Model NumberHR802-4-PR

Listed on Amazon as: Ruedamann 4Ft Truck Ramps, 2 Pcs 4400 Lbs Total Capacity, Aluminum Trailer Ramp, Heavy-Duty ATV Ramps for Pickup Trucks, UTVs, Motorcycles, Lawn Mowers, Golf Carts

View on Amazon

Avoiding ramp slip and sideways movement

Ramp movement is a key loading failure to guard against, so treat a listed strap or anti-slip feature as part of the setup rather than a substitute for secure placement. The VEVOR 7.5ft Aluminum Ramps include a safety strap, while Bonnlo 7ft Aluminum Ramps list adjustable straps and rubber fingers. VEVOR 60-Inch Aluminum Ramps have a full-width hook attaching end, and Ruedamann 4Ft Truck Ramps list side protection and an anti-slip surface.

These features differ, so do not assume every pair attaches in the same way. Position each ramp squarely, ensure its upper end is seated, and follow the product’s instructions for securing it.

With separate ramps, keep the tracks matched to the ATV’s wheel spacing and center each tire. If the ramps shift, twist, or fail to sit securely, stop and correct the setup before loading; a capacity rating does not establish stability on every surface.

Why a high capacity does not guarantee a good fit

A large capacity number cannot compensate for a ramp that is too short, too narrow, or incompatible with the loading approach. These products range from 48.2-inch Ruedamann 4Ft Truck Ramps to 89.8-inch gardhom Aluminum Truck Ramps; the Ruedamann listing specifically recommends a use height under 13.8 inches. The formats also differ: separate ramps support two wheel tracks, while the 44-to-54-inch-wide tri-fold models create a single broad platform.

Check that your vehicle’s wheel spacing and tire path suit the ramp layout, and compare ramp length with the actual height you need to reach. Published capacities vary in how they are described: some specify a pair total, while others mention per-ramp ratings or sections.

Use the stated total for the exact configuration, and do not treat a higher number as permission to exceed an individual ramp’s limit.

How to Choose ATV Aluminum Ramps

Ramp length and loading height

Choose ramp length against the height you need to reach, rather than picking by capacity alone. The products range from 48.2-inch Ruedamann 4Ft Truck Ramps and 60-inch VEVOR 60-Inch Aluminum Ramps to pairs around 89 inches, including the VEVOR 7.5ft Aluminum Ramps. The Ruedamann listing recommends a use height under 13.8 inches, while the longer options are intended for pickup or trailer loading.

A longer ramp may suit a higher loading surface; a shorter one can fit a low loading height or a more compact storage space. Measure the vehicle or trailer loading height and check the ramp’s instructions before purchase.

Product length alone does not establish a safe loading angle for every setup.

Pair capacity and load distribution

Check both the total capacity and any per-ramp or per-section limit, then compare them with the loaded ATV’s weight. Several pairs, including VENDAV Folding Aluminum Ramps and MAXIVAMN Aluminum ATV Ramps, are rated at 1,500 pounds per pair, with up to 750 pounds per ramp when evenly distributed. gardhom Aluminum Truck Ramps list 3,000 pounds per pair, while Ruedamann 4Ft Truck Ramps list 4,400 pounds per pair.

The 60-inch VEVOR pair lists 6,000 pounds total, but its 60-inch length may not suit a higher loading surface. A higher capacity may appeal to heavier equipment, while a 1,500-pound rating may fit lighter ATVs.

Follow the specific product’s loading directions and do not rely on a pair total as an individual ramp rating.

Two tracks or a single wide platform

Choose a ramp layout that matches how your ATV’s tires will approach and travel up the loading surface. Most options here are two-ramp pairs, such as the 89-by-12-inch VENDAV Folding Aluminum Ramps; its listing gives an approximately 11-inch wheel path between the side rails. Tri-fold choices instead provide a wider continuous surface: YITAMOTOR Tri-Fold Aluminum Ramp measures 69 by 44 inches, GarveeTech Tri-Fold Ramp measures about 76 by 50 inches, and KROAK Ultra-Wide Tri-Fold Ramp is listed with a 54-inch width.

Separate tracks suit buyers who can space ramps to match wheel spacing and center each tire. A wide platform may suit buyers seeking a broader path, but it is a single ramp with its own weight and capacity limits.

Confirm dimensions and loading instructions before choosing either style.

Which ATV Ramps Should You Choose?

For most pickup or trailer owners seeking separate tracks for an ATV, choose the VEVOR 7.5ft Aluminum Ramps: its 89-inch length, 1,500-pound pair rating, foldable design, and included strap make it the strongest all-around fit in this group. If an approximately 11-inch wheel path is a priority, VENDAV Folding Aluminum Ramps offer that stated dimension with the same pair capacity. For a broader single-platform approach, KROAK Ultra-Wide Tri-Fold Ramp provides a 54-inch width and 1,800-pound listed capacity; YITAMOTOR Tri-Fold Aluminum Ramp is a lighter 31.2-pound option.

Buyers needing more stated pair capacity can consider gardhom Aluminum Truck Ramps, while those loading at a height under 13.8 inches can assess Ruedamann 4Ft Truck Ramps. Match capacity, length, and layout to your actual setup.

Frequently Asked Questions

How do I choose ramp length for my truck bed or trailer height?

Choose a length that suits the height your ATV must climb and the loading space available. Check the ramp’s stated length against your truck bed or trailer height, and make sure the ramp can sit securely in your setup. The 89-inch VEVOR pair is a leading option for typical ATV loading, but confirm fit before choosing.

How can I keep two separate ATV ramps aligned and secure while loading?

Place the ramps to match your ATV’s wheel spacing, and check that both ends sit securely on the ground and loading surface before moving. Keep the ramps parallel and distribute the load across both. The VEVOR 7.5-foot pair includes a safety strap; use included securing equipment as directed and verify the setup is stable.

Should I use a wide tri-fold ramp or two individual ramps for my ATV?

Choose two individual ramps when you want separate wheel tracks; choose a tri-fold when a broader single platform suits your loading approach. The VEVOR pair measures 89 by 12 inches per ramp, while the KROAK tri-fold is 54 inches wide. Match the layout to your ATV and loading space.

How do I check whether a ramp’s capacity is suitable for my ATV?

Compare your ATV’s weight with the stated capacity for the ramp or pair, and do not exceed that rating. For two separate ramps, distribute the load across both. The VEVOR pair is rated for 1,500 pounds, while the KROAK tri-fold lists a capacity of 1,800 pounds.

What should I consider if storage space is limited?

Check the ramp’s folded dimensions or overall layout against your available storage space. The VEVOR 7.5-foot pair folds to 45.7 by 12 inches, while tri-fold options use a single broader platform when opened. Compare the stated form and dimensions with where you plan to store and transport the ramps.

Final Words

For most pickup or trailer owners loading an ATV on separate tracks, the VEVOR 7.5ft pair is the leading fit: it measures 89 by 12 inches per ramp, carries a listed 1,500 pounds per pair, folds, and includes a safety strap. Check that the length suits your loading height and the capacity suits your ATV. Prefer a broad platform or a shorter ramp?

Compare the tri-fold and 4-foot options against your setup.

Leave a Reply

Your email address will not be published. Required fields are marked *