A strong auto clutch choice should match your motorcycle’s engine and clutch style first, then deliver the engagement behavior you want. Rekluse RMS-2815010 Torq-Drive is the closest fit for riders seeking automatic engagement on a motorcycle, while several lower-ranked products are replacement assemblies for small Chinese semi-automatic engines rather than conventional road bikes. This roundup also includes two Muller hydraulic clutch aids, which reduce lever effort but do not claim automatic engagement.
The key distinction is that “auto clutch” can describe very different parts: an automatic engagement system, a semi-automatic engine clutch, or a hydraulic lever-effort aid. Check model-specific fitment, drive-gear teeth and dimensions before ordering; similar product names do not guarantee compatibility.
Rekluse RMS-2815010 Torq-Drive leads because its listed features specifically describe smooth automatic engagement, allowing takeoffs and stops in gear without using the clutch lever. Its TorqDrive friction technology also adds up to six friction disks over stock for increased torque capacity. Confirm that the listed RA1250 Pan America 1250 model designation matches your motorcycle before buying.
If you have a small Chinese semi-automatic engine instead, choose a compatible tooth-count assembly rather than assuming this motorcycle-focused clutch fits.
Our Top Picks
Best OverallRekluse RMS-2815010 Torq-Drive
Its EXP auto clutch disk enables takeoffs and stops in gear without the lever, and the TorqDrive pack can add up to six friction disks over stock.
View on Amazon
Best Small-Engine KitIt targets Chinese 50cc to 110cc automatic engines and lists a 102 mm outer diameter plus 15 mm and 17 mm hole dimensions.
View on Amazon
Best 18T AssemblyThis complete automatic-engine assembly specifies an 18-tooth drive gear, 116 mm outer diameter, and included gasket, bearings, spring, and hardware.
View on Amazon- Broadest Engine Range 1PZ 17T Clutch Assembly
Compare clutch options by fitment and function
| # | Product | Package Dimensions | Weight | Buy |
|---|---|---|---|---|
| 1 | 1. Rekluse RMS-2815010 Torq-DriveBest Overall | — | 7 lb | View on Amazon |
| 2 | 2. Sorandy Automatic Clutch KitBest Small-Engine Kit | 5.47 x 4.57 x 1.5 in | 2.11 lb | View on Amazon |
| 3 | 3. AuInLand 18T Clutch AssemblyBest 18T Assembly | 5.51 x 5.35 x 2.6 in | 3.47 lb | View on Amazon |
| 4 | 4. 1PZ 17T Clutch AssemblyBroadest Engine Range | 5.04 x 4.92 x 3.03 in | 3.2 lb | View on Amazon |
| 5 | 5. TRKIMAL 17T Clutch Assembly17-tooth semi-auto engine owners | 5.94 x 4.53 x 3.39 in | 3.32 lb | View on Amazon |
| 6 | 6. Ouyunou 17T Semi-automatic ClutchYX and Lifan reverse-ATV owners | 2.99 x 2.98 x 2.98 in | 8 oz | View on Amazon |
| 7 | 7. hauertzx 17T Clutch Assembly17-tooth small-engine replacements | 5.39 x 5.39 x 2.56 in | 3.52 lb | View on Amazon |
| 8 | 8. Muller 120-60 Hydro ClutchTwin Cam and M-Eight hydraulic riders | — | 1.12 lb | View on Amazon |
| 9 | 9. Muller 120-50 Hydro ClutchHydraulic-clutch Twin Cam riders | — | 1.1 lb | View on Amazon |
Detailed Reviews: Best Auto Clutch For Motorcycle

#1 · Best Overall
1. Rekluse RMS-2815010 Torq-Drive
- Weight: 7 lb
Best for: Pan America 1250 low-speed riders.
Why it ranks #1: Its EXP auto clutch disk enables takeoffs and stops in gear without the lever, and the TorqDrive pack can add up to six friction disks over stock.
Rekluse’s EXP auto-clutch disk lets riders take off and stop in gear without using the clutch lever, targeting low-speed maneuvering and reduced rider fatigue. The TorqDrive friction disks add clutch-pack capacity, and the listing identifies the application around the RA1250 Pan America 1250.
The EXP disk provides automatic engagement, while TorqDrive’s additional friction disks are intended to raise torque capacity without stiffer pressure-plate springs or a lock-up. Rekluse says the pack can accommodate up to six additional friction disks over stock, linking its compact pack approach to power transfer. The system also replaces a stock diaphragm spring with six coil springs. These model-specific components make application confirmation central before installation.
- EXP disk enables takeoffs and stops in gear
- TorqDrive friction technology is included
- Can add up to six friction disks over stock
- Six coil springs replace the stock diaphragm spring
- The listed model application is the RA1250 Pan America 1250.
Skip it if you ride a different motorcycle and need a broadly specified fit; this listing identifies the RA1250 Pan America 1250 application.
This is for RA1250 Pan America 1250 riders seeking lever-free starts and stops in gear, plus the listed TorqDrive capacity approach. Its model-specific application is the central fit boundary, so it is not a general small-engine clutch replacement.
Full product details
| Brand | Rekluse |
|---|---|
| Item Weight | 7 pounds |
| Item model number | RA1250 Pan America 1250 |
| Manufacturer | Rekluse |
| Part Number | RMS-2815010 |
| Model | RA1250 Pan America 1250 |
| Dimensions | 7.5 x 7.5 x 2 inches |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: Rekluse RMS-2815010 Torq-Drive Clutch
View on Amazon
#2 · Best Small-Engine Kit
2. Sorandy Automatic Clutch Kit
- Package Dimensions: 5.47 x 4.57 x 1.5 in
- Weight: 2.11 lb
Best for: Compact Chinese-engine replacements.
Why it ranks #2: It targets Chinese 50cc to 110cc automatic engines and lists a 102 mm outer diameter plus 15 mm and 17 mm hole dimensions.
A 102 mm outer diameter and two listed hole diameters give this aluminum-alloy automatic clutch concrete dimensions for matching a replacement. Sorandy lists compatibility with common Chinese four-stroke horizontal-cylinder engines and applications including dirt bikes, ATVs, super pocket bikes, mini choppers, and karts.
The stated 17 mm and 15 mm hole diameters, plus a 55 mm screw-hole distance, give buyers several measurements to compare with the old part before installation. The listing describes a simple installation that needs no complicated steps or many tools, which may help keep a replacement job straightforward. Its aluminum-alloy construction is described as wear-resistant, and the specified fitment centers on Chinese automatic engines rather than manual-clutch applications.
- 102 mm outer diameter is specified
- Two hole diameters are listed
- 55 mm screw-hole distance is specified
- Aluminum alloy is described as wear-resistant
- Listed fitment centers on Chinese automatic engines, not a broad universal application.
Skip it if you need a clutch for a manual engine or cannot match the listed dimensions; the stated applications focus on Chinese automatic engines.
This is a candidate for owners of common Chinese four-stroke horizontal-cylinder automatic engines replacing a worn clutch. Compare the 102 mm diameter, hole sizes, and screw spacing with the existing part, since those dimensions define the practical fit boundary.
Full product details
| Brand | Sorandy |
|---|---|
| Item Weight | 2.11 pounds |
| Item model number | Sorandymchg85f34o |
| Part Number | Sorandymchg85f34o |
| Package Dimensions | 5.47 x 4.57 x 1.5 inches |
Listed on Amazon as: Auto Clutch Kit, ATV Automatic Clutch with Lid, Automatic Clutch Assembly for Chinese 50cc to 110cc Dirt Bikes, ATVs, Super Pocket Bikes, Mini Choppers, Kart
View on Amazon
#3 · Best 18T Assembly
3. AuInLand 18T Clutch Assembly
- Package Dimensions: 5.51 x 5.35 x 2.6 in
- Weight: 3.47 lb
Best for: 18-tooth automatic-engine replacements.
Why it ranks #3: This complete automatic-engine assembly specifies an 18-tooth drive gear, 116 mm outer diameter, and included gasket, bearings, spring, and hardware.
The 18-tooth drive gear and complete hardware set distinguish this automatic clutch assembly for buyers replacing a Honda-style unit. Its listed 50cc–125cc application range covers motorcycles, ATVs, dirt bikes, and go-karts with automatic reverse engines, while the specified spline and bore dimensions help guide selection.
A 116 mm outer diameter, 10 mm inner hole, and φ15×φ17 spline size provide concrete dimensions for comparing the assembly with the existing clutch. The included gasket, bearings, spring, screws, bolts, washers, and spacers can keep related replacement hardware together for installation. This is specifically an 18-tooth automatic-engine unit; the listing says it is not for manual-style clutches, so checking clutch type is essential before ordering.
- 18-tooth drive gear is specified
- Complete assembly set includes hardware
- 116 mm outer diameter is listed
- Fits stated automatic reverse-engine applications
- Not intended for manual-style clutches.
Skip it if you need a manual-style clutch or an engine outside the listed 50cc–125cc applications; this unit is specified for automatic reverse engines.
Choose this for a Honda-style automatic reverse-engine replacement within the stated 50cc–125cc range, especially when the included small hardware is useful. Its 18-tooth gear and listed dimensions are selection boundaries, not a universal fit guarantee.
Full product details
| Brand | AuInLand |
|---|---|
| Item Weight | 3.47 pounds |
| Item model number | NQ-0047 |
| Manufacturer | AuInLand |
| Part Number | NQ-0047 |
| Package Dimensions | 5.51 x 5.35 x 2.6 inches |
Listed on Amazon as: Clutch Assembly 18 Teeth Fits For Auto 50cc-125cc Engine Motorcycle Dirt Bikes ATV Go Kart
View on Amazon
#4 · Broadest Engine Range
4. 1PZ 17T Clutch Assembly
- Package Dimensions: 5.04 x 4.92 x 3.03 in
- Weight: 3.2 lb
Best for: Chinese reverse-engine ATV owners.
Why it ranks #4: The 17-tooth semi-automatic assembly lists fitment for 50cc, 110cc, 125cc, and 135cc engines and names several Chinese ATV and dirt-bike brands.
A 17-tooth drive gear paired with a 41⁄2-inch semi-automatic assembly gives owners of compatible reverse-engine machines a clearly specified replacement option. The listed range covers 50cc to 135cc ATVs, dirt bikes, and go-karts, including several Chinese brands, so buyers can narrow their search by engine size and vehicle type.
The iron construction is described as sturdy, wear-resistant, and quick to dissipate heat, which supports use in the listed powersports applications. Its 17-tooth gear and semi-automatic format make the key selection points explicit; the listing specifies compatibility with reverse engines rather than manual-style clutches. At 41⁄2 inches in diameter, the assembly also offers a dimension to compare against the part being replaced. The package contains one clutch assembly.
- 17-tooth drive gear is specified
- 41⁄2-inch assembly diameter is listed
- Fits stated 50cc–135cc applications
- Iron construction is described as wear-resistant
- Compatibility is limited to listed reverse-engine applications, not manual-style clutches.
Skip it if you have a manual-style clutch or an engine outside the listed 50cc–135cc range; this assembly is specified for reverse engines.
This suits owners of listed 50cc–135cc reverse-engine ATVs, dirt bikes, and go-karts who need a 17-tooth semi-automatic assembly. Check the engine and existing assembly dimensions before selecting it, since the stated fit is application-specific.
Full product details
| Brand | 1PZ |
|---|---|
| Item Weight | 3.2 pounds |
| Item model number | TA1-17T |
| Manufacturer | Dragonpartify LLC |
| Part Number | TA1-17T |
| Package Dimensions | 5.04 x 4.92 x 3.03 inches |
Listed on Amazon as: 17 Teeth Semi Automatic Clutch Assembly for 50cc 110cc 125cc 135cc ATV Quad Go Kart Dirt Bike Roketa Kazuma JCL NST SUNL Taotao
View on Amazon
#5
5. TRKIMAL 17T Clutch Assembly
- Package Dimensions: 5.94 x 4.53 x 3.39 in
- Weight: 3.32 lb
Best for: 17-tooth semi-auto engine owners.
Why it ranks #5: Its 17-tooth gear is specified for 50cc through 135cc semi-automatic engines, with an explicit warning that it is not for manual-style clutches.
The 17-tooth drive gear makes this TRKIMAL semi-auto assembly a focused replacement choice for listed 50cc–135cc engines. Its stated applications include dirt bikes, ATVs, quads, and go-karts, while the explicit warning against manual-style clutches helps buyers avoid a basic clutch-type mismatch.
The listed displacement range includes 50cc, 70cc, 90cc, 110cc, 125cc, and 135cc engines, giving owners a useful first check against their machine. The 17-tooth drive gear is another direct selection criterion, and the product is identified as semi-automatic. Because the listing explicitly excludes manual-style clutches, buyers should establish their engine’s clutch configuration before ordering; the supplied details do not provide further assembly dimensions for comparison.
- 17-tooth drive gear is specified
- Semi-automatic clutch type is identified
- Six engine sizes are listed
- Applications include dirt bikes, ATVs, and go-karts
- Not for manual-style clutches.
Skip it if you have a manual-style clutch or need additional assembly dimensions for comparison; the listing provides the tooth count and application details.
This suits owners of listed 50cc–135cc semi-automatic engines in dirt bikes, ATVs, quads, or go-karts seeking a 17-tooth replacement. The manual-clutch exclusion is a firm boundary, and the provided listing offers limited dimension detail.
Full product details
| Brand | TRKIMAL |
|---|---|
| Item Weight | 3.32 pounds |
| Item model number | TRKIMAL401A |
| Manufacturer | TRKIMAL |
| Part Number | trkimal401a |
| Model | TRKIMAL401A |
| Package Dimensions | 5.94 x 4.53 x 3.39 inches |
Listed on Amazon as: Semi Auto Clutch Assembly 17Teeth For 50cc 70cc 90cc 110cc 125cc 135cc Engine Dirt Bikes ATV Quad Go-Kart Taotao Kazuma (17Teeth)
View on Amazon
#6
6. Ouyunou 17T Semi-automatic Clutch
- Package Dimensions: 2.99 x 2.98 x 2.98 in
- Weight: 8 oz
Best for: YX and Lifan reverse-ATV owners.
Why it ranks #6: It specifies fitment for YX and Lifan 110cc and 125cc reverse ATV engines and Honda-style horizontal-cylinder engines, but asks buyers to verify fitment carefully.
A 17-tooth semi-automatic clutch listed for YX and Lifan 110cc and 125cc reverse ATVs gives buyers a narrow, identifiable replacement target. The application also names Honda-style four-stroke horizontal-cylinder engines, helping owners compare engine family and clutch type before choosing this single-piece assembly.
The 17-tooth specification and named YX and Lifan engine applications give two concrete checks for replacement selection. Additional verified information describes it as a disc-style clutch used in Chinese 50cc–125cc engines and says it is not for manual-style clutches or handlebar-mounted clutch levers. The package contains one clutch. Because the listing emphasizes particular engine and vehicle families, matching the existing clutch configuration is important.
- 17-tooth semi-automatic design is specified
- Lists YX and Lifan applications
- Names Honda-style horizontal-cylinder engines
- Single clutch assembly is included
- Not for manual-style clutches or handlebar-mounted clutch levers.
Skip it if you use a manual-style clutch or handlebar-mounted clutch lever; this assembly is listed for semi-automatic applications.
This suits owners of listed YX or Lifan 110cc–125cc reverse ATVs and compatible Honda-style horizontal-cylinder engines seeking a 17-tooth semi-automatic clutch. Its manual-clutch and handlebar-lever exclusions are important fit boundaries.
Full product details
| Brand | Ouyunou |
|---|---|
| Item Weight | 8 ounces |
| Item model number | OYO-F0060 |
| Manufacturer | Ouyunou |
| Part Number | OYO-F0060 |
| Model | 17T Semi-automatic Clutch |
| Package Dimensions | 2.99 x 2.98 x 2.98 inches |
Listed on Amazon as: 17T Semi-automatic Clutch For YX Lifan 110cc 125cc Reverse ATV Quad And Honda Style 4-stroke Horizontal Cylinder Engines
View on Amazon
#7
7. hauertzx 17T Clutch Assembly
- Package Dimensions: 5.39 x 5.39 x 2.56 in
- Weight: 3.52 lb
Best for: 17-tooth small-engine replacements.
Why it ranks #7: The listing covers 50cc to 135cc semi-automatic ATV, go-kart, and dirt-bike engines and includes accessories, though it gives limited detailed measurements.
A 17-tooth semi-automatic assembly with accessories covers a stated engine range from 50cc through 135cc. The listing names ATV quads, go-karts, and dirt bikes, along with Roketa, Kazuma, JCL, NST, SUNL, and Taotao applications, giving buyers concrete starting points for replacement-part selection.
The 17-tooth specification helps distinguish this assembly from units using another drive-gear count, while the semi-automatic designation narrows the clutch type. Its listed 50cc, 70cc, 90cc, 110cc, 125cc, and 135cc engine sizes help owners compare against their machine’s stated displacement. Accessories are included, according to the title, but the supplied information does not identify their contents; verify the existing clutch type and engine application before relying on it.
- 17-tooth gear is specified
- Semi-automatic clutch type is identified
- Six engine sizes are listed
- Accessories are included according to the title
- The supplied listing does not identify which accessories are included.
Skip it if you need a manual-style clutch or require a specified accessory inventory; the listing identifies neither as a fit for this assembly.
This fits the search for a 17-tooth semi-automatic assembly for a listed 50cc–135cc ATV, go-kart, or dirt bike engine. Treat the named brands and sizes as the stated application range, and note that accessory contents are unspecified.
Full product details
| Brand | hauertzx |
|---|---|
| Item Weight | 3.52 pounds |
| Item model number | hauertzx |
| Manufacturer | hauertzx |
| Part Number | hauertzx |
| Model | hauertzx |
| Package Dimensions | 5.39 x 5.39 x 2.56 inches |
Listed on Amazon as: 17T Semi Automatic Clutch Assembly with Accessories for 50cc 70cc 90cc 110cc 125cc 135cc ATV Quad Go Kart Dirt Bike Engine,Powersports Clutches for Roketa Kazuma JCL NST SUNL Taotao (17T)
View on AmazonWhy it ranks #8: This is a hydraulic clutch-effort aid for Twin Cam and M-Eight models, not an automatic clutch; it lists 35% to 45% less pull effort.
Muller’s 120-60 Hydro Clutch is specifically listed for Twin Cam and M-Eight models with hydraulic clutches, with claimed pull-effort reductions of 35% and 45%, respectively. That model-specific focus helps riders seeking a lighter lever pull identify whether the advertised benefit applies to their platform.
The stated 45% reduction for M-Eight and 35% for Twin Cam models makes the pull-effort claim tied to two named motorcycle families rather than a universal figure. Muller also describes better clutch response and easy, invisible mounting, supporting a retrofit aimed at lever feel without a conspicuous installation. The listing says the unit needs zero maintenance. Its hydraulic-clutch compatibility is the key boundary: it is not presented as a small-engine automatic clutch assembly.
- Specified for Twin Cam hydraulic clutches
- Specified for M-Eight hydraulic clutches
- Claims reduced pull effort on both platforms
- Listing says zero maintenance
- Compatibility is limited to specified Twin Cam and M-Eight hydraulic-clutch models.
Skip it if you need an automatic clutch for a small ATV, dirt bike, or go-kart; this unit is specified for Twin Cam and M-Eight hydraulics.
This is for Twin Cam or M-Eight owners with hydraulic clutches who want the listed pull-effort reduction and a discreet mount. Confirm the motorcycle belongs to a stated family; this product is not a general-purpose automatic clutch.
Full product details
| Brand | MULLER MOTORCYCLE AG |
|---|---|
| Item Weight | 1.12 pounds |
| Manufacturer | Muller MotorCycle Ag |
| Part Number | 120-60 |
| Model | Hydro Clutch |
| Dimensions | 9.5 x 7 x 3 inches |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: 120-60 Hydro Clutch
View on AmazonWhy it ranks #9: It is a model-specific hydraulic lever-effort aid for Twin Cam and M-Eight motorcycles, not an automatic engagement system, so it least matches this search.
The 120-50 Hydro Clutch targets Twin Cam and M-Eight motorcycles equipped with hydraulic clutches, with stated pull-effort reductions of 35% and 45%, respectively. Its model-specific fit and discreet mounting make it a focused lever-feel upgrade rather than an automatic clutch for small powersports engines.
Muller lists 35% less pull effort on Twin Cam models and 45% on M-Eight models, connecting the claimed benefit to the motorcycle family. The product also promises better clutch response and easy, invisible mounting, while the listing states zero maintenance. Its alloy-steel handle material and model-specific compatibility are specified. Those details point to a hydraulic-clutch retrofit, but the named Twin Cam and M-Eight boundary should guide fit selection.
- Specified for Twin Cam hydraulic-clutch models
- Specified for M-Eight hydraulic-clutch models
- Claims lower pull effort for both groups
- Listing states zero maintenance
- Fit is specified for Twin Cam and M-Eight hydraulic-clutch models.
Skip it if you need a clutch assembly for a small automatic ATV or dirt bike; this product is listed for Twin Cam and M-Eight hydraulic clutches.
Choose this if your Twin Cam or M-Eight has a hydraulic clutch and you want the listed pull-effort change with discreet mounting. The model-family limitation matters; this is not a universal automatic clutch assembly.
Full product details
| Brand | MULLER MOTORCYCLE AG |
|---|---|
| Color | Black |
| Handle Compatibility | Model Specific |
| Handle Material | Alloy Steel |
| Item Weight | 1.1 pounds |
| Manufacturer | Muller MotorCycle Ag |
| Part Number | 120-50 |
| Style | Classic |
| Style Name | Classic |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: 120-50 Hydro Clutch
View on AmazonAvoid the automatic-versus-semi-automatic mix-up
An automatic-engagement clutch and a semi-automatic replacement assembly are not interchangeable categories. Rekluse RMS-2815010 Torq-Drive describes EXP auto engagement for stops and takeoffs in gear; the 1PZ 17T Clutch Assembly and similar products target small semi-automatic engines. Muller 120-60 Hydro Clutch and Muller 120-50 Hydro Clutch are different again: their listed purpose is to reduce pull effort on specified hydraulic-clutch models, not to automate engagement.
A common buying mistake is to match only the word “automatic” in a listing title and overlook the engine and control-system differences. Before selecting a part, identify whether your bike has a manual lever-operated clutch, a semi-automatic engine, or a hydraulic system.
Then compare the product’s stated application to your exact motorcycle or engine. If the listing does not establish that match, don’t treat broad vehicle-category wording as confirmation.
Tooth count and dimensions can rule out a clutch
A matching engine capacity alone does not establish clutch compatibility; drive-gear teeth and physical measurements can matter just as much. AuInLand 18T Clutch Assembly explicitly requires an 18-tooth drive gear and lists a 116 mm outer diameter, 10 mm inner hole, and φ15×φ17 spline size. By contrast, 1PZ 17T Clutch Assembly and TRKIMAL 17T Clutch Assembly specify 17 teeth, and TRKIMAL warns against manual-style clutches.
Sorandy Automatic Clutch Kit lists a 102 mm outer diameter and two hole diameters, approximately 15 mm and 17 mm. These are not minor differences to gloss over: choosing by displacement while ignoring tooth count or mounting dimensions can leave you with a part that does not fit.
Check the old assembly and engine documentation against the listing details. Where a product gives few measurements, such as hauertzx 17T Clutch Assembly, seek an exact fitment confirmation before ordering.
How to Choose a Motorcycle Auto Clutch
Clutch function and motorcycle fit
First choose the product type that matches your bike’s clutch system and intended behavior. Rekluse RMS-2815010 Torq-Drive lists automatic engagement for a motorcycle identified as RA1250 Pan America The two Muller products fit Twin Cam and M-Eight models with hydraulic clutches, but they reduce pull effort rather than provide automatic engagement.
Most remaining choices are assemblies for small 50cc to 135cc engines used in ATVs, dirt bikes, and go-karts. Riders seeking automatic takeoff behavior on the specified motorcycle should start with Rekluse RMS-2815010 Torq-Drive and verify exact model fit.
A rider replacing a small semi-automatic engine assembly should instead focus on the engine-specific products. Choose a Muller only when the aim is lighter lever pull on its listed model family.
Engine range and drive-gear teeth
Match engine capacity and drive-gear tooth count to the existing assembly, rather than choosing by a broad fitment claim alone. 1PZ 17T Clutch Assembly covers 50cc, 110cc, 125cc, and 135cc applications, while AuInLand 18T Clutch Assembly is specified for 50cc to 125cc engines and explicitly requires 18 teeth. TRKIMAL 17T Clutch Assembly also lists 50cc to 135cc semi-automatic engines.
Sorandy Automatic Clutch Kit covers Chinese 50cc to 110cc engines and provides physical dimensions instead of a tooth-count specification. The 17T options suit buyers whose existing engine requires that gear; AuInLand is the clear choice only when the engine requires 18 teeth.
Verify the actual engine and clutch before ordering, especially when the machine’s capacity falls within several listings’ overlapping ranges.
Measurements and included parts
Compare mounting measurements and package contents when the listing supplies them, since these details can help distinguish otherwise similar assemblies. AuInLand 18T Clutch Assembly specifies a 116 mm outer diameter and includes a gasket, bearings, spring, screws, bolts, washers, and spacers. Sorandy Automatic Clutch Kit gives an approximately 102 mm outer diameter, hole diameters of 15 mm and 17 mm, and screw-hole distance of approximately 55 mm.
1PZ 17T Clutch Assembly lists a 4-1/2-inch diameter, while several alternatives provide little measurement detail. Buyers replacing a worn unit and able to compare dimensions may prefer the more fully specified assemblies.
If you need included mounting hardware, AuInLand has the clearest listed contents. When measurements are absent or the old part is unavailable, exact engine fitment becomes especially important; do not infer compatibility from a shared capacity range.
Which Auto Clutch Should You Choose?
For automatic engagement on the listed motorcycle platform, choose Rekluse RMS-2815010 Torq-Drive first, and verify the RA1250 Pan America 1250 fitment against your bike. If you are replacing a small Chinese automatic engine clutch, Sorandy Automatic Clutch Kit is a dimension-detailed option for 50cc to 110cc applications. Choose AuInLand 18T Clutch Assembly when your engine specifically needs an 18-tooth gear and the listed measurements match.
For a 17-tooth semi-automatic assembly, compare 1PZ 17T Clutch Assembly, TRKIMAL 17T Clutch Assembly, and Ouyunou 17T Semi-automatic Clutch against your engine and existing part. Pick a Muller only if you want reduced pull effort on a listed Twin Cam or M-Eight hydraulic-clutch model; neither Muller product is an automatic-engagement clutch.
Related Buying Guides
- Best Auto Clutch For Dirt Bike
- Best Motorcycle Oil For Wet Clutch
- Best Motorcycle Oil Wet Clutch
- Best Clutch For Semi Truck
- Best Clutch For Dirt Bike
Frequently Asked Questions
How can I tell whether my motorcycle uses an automatic, semi-automatic, or manual clutch?
Check your motorcycle’s manual and existing controls, then compare them with the clutch type listed for your engine. Automatic engagement, semi-automatic operation, and a manual clutch with a lever are different arrangements. If the documentation is unclear, confirm the setup with the manufacturer or a qualified mechanic before ordering.
How do I verify clutch fitment when my engine model or gear-tooth count is unclear?
Identify the engine designation and count the teeth on the existing clutch gear, if accessible. Compare those details and the listed application with the replacement assembly; do not assume that similar engine size means a match. If you cannot confirm the information, ask the seller or a mechanic to verify fitment before buying.
Does an automatic clutch eliminate the need to use a clutch lever in every riding situation?
No. The listed Rekluse Torq-Drive features describe smooth automatic engagement for takeoffs and stops in gear without using the clutch lever. That does not establish that a lever is unnecessary in every riding situation.
Check the instructions for the exact clutch and motorcycle, and confirm the listed RA1250 Pan America 1250 fitment.
Why does the number of teeth matter when choosing a replacement clutch?
The tooth count must match the engine’s required assembly. The listed options include 17-tooth and 18-tooth assemblies, so choosing by engine size alone could leave you with the wrong part. Check your existing gear and engine requirements against the listing before ordering; do not assume one tooth count substitutes for another.
Are the hydraulic clutch options automatic-engagement clutches?
No. The editorial verdict identifies the Muller products as options for reduced pull effort on listed Twin Cam or M-Eight hydraulic-clutch models, not as automatic-engagement clutches. Choose one only if that application and function match your needs.
For automatic engagement on the listed motorcycle platform, the verdict favors the Rekluse Torq-Drive.
Final Words
Start by identifying your clutch type, engine designation, and required gear-tooth count; verify each against the product listing before ordering. For automatic engagement on the listed RA1250 Pan America 1250, the Rekluse Torq-Drive leads, but confirm that exact fitment. For small Chinese engines, match the assembly to your application and tooth count.
Treat the Muller hydraulic options as reduced-pull choices, not automatic clutches.




