Best Headlights For Semi Trucks: 10 4×6 LED Options Compared

Best Headlights For Semi Trucks

A strong semi-truck headlight choice delivers a compatible 4×6 fit, suitable beam functions, and clear vehicle-specific fitment details; it suits drivers replacing older sealed beams on trucks such as Kenworth, Peterbilt, or Freightliner. Our leading pick is the Z-OFFROAD 4×6 LED, a four-piece DOT-approved set listing compatibility with several of those truck lines and replacement numbers including H4651 and H4656. The options below vary in beam configuration, output details, weather features, and included wiring, so the right set depends on your truck’s headlamp layout and operating conditions.

Check your existing lamp size, connector, voltage, and required beam positions before ordering. A fitment list that names a truck family is useful, but it does not confirm every model year or trim; verify the exact application before purchase.

The Z-OFFROAD 4×6 LED is our Best Overall choice for semi-truck shoppers because its four-piece set is listed as DOT approved and compatible with Kenworth T800, T400, T600, and W900 variants, Peterbilt 357, 378, and 379, and Freightliner FLD models. It also replaces several common 4×6 sealed-beam numbers, including H4651, H4652, H4656, H4666, and H6545. Confirm your truck’s headlamp layout, connector, and exact fitment before buying; the listing specifies 12 volts.

Our Top Picks

Z-OFFROAD 4x6 LEDBest Overall

Z-OFFROAD 4×6 LED

Four-piece DOT-approved set lists Kenworth, Peterbilt, and Freightliner fitments, plus replacement numbers H4651, H4652, H4656, H4666, and H6545.

View on Amazon
Auxbeam 4x6 LEDBright Output

Auxbeam 4×6 LED

Truck fitment includes Kenworth, Peterbilt 357, 378, and 379, and Freightliner FLD; listed output is 3,600 lumens high and 2,800 low.

View on Amazon
MAYELLO 4x6 LEDLonger Warranty

MAYELLO 4×6 LED

Names Freightliner FLD, Peterbilt, and Kenworth truck fitments, with 4,500-lumen high beam, 3,000-lumen low beam, and a two-year warranty.

View on Amazon

Compare Headlight Options and Fitment Details

#ProductLens MaterialWattageVoltageCompatible with Vehicle TypeBuy
1Polycarbonate108 W12 V DCTruckView on Amazon
2
Auxbeam 4x6 LED2. Auxbeam 4×6 LEDBright Output
Polycarbonate55 W12 V DCFit for most vehicles with 2 or 4 headlights…View on Amazon
3
MAYELLO 4x6 LED3. MAYELLO 4×6 LEDLonger Warranty
Polycarbonate60 W12 V DCLED Headlights Compatible with Freightliner…View on Amazon
4Polycarbonate60 W12 V DC1975 – 1985 Cadillac Eldorado; 1975 – 1985…View on Amazon
5
Partsam 4x6 LED5. Partsam 4×6 LEDHigh Beam Output
Polymethyl methacrylate45 W12 VTruck,tractor,SUV,ATV,UTV,Four-wheel drive…View on Amazon
6
TRUE MODS 4x6 LED6. TRUE MODS 4×6 LEDH4 plug-in 4×6 replacement
Polycarbonate28.8 W12 VCar, SUV, TruckView on Amazon
7
AMUNIESUN 4x6 Halo7. AMUNIESUN 4×6 HaloHalo and signal lighting upgrade
Polycarbonate4512 VH4651 H4652 H4656 H4666 H4668 H6545…View on Amazon
8
C2W Heated High Beam8. C2W Heated High BeamSnow-prone high-beam truck use
Polycarbonate—12 VTruckView on Amazon
9
LEDUR 4x6 Halo9. LEDUR 4×6 HaloHalo signal and DRL combination
Polycarbonate120 W12 V DCCompatible With Buick…View on Amazon
10
BAOLICY 4x6 LED10. BAOLICY 4×6 LEDWide-view two-lamp upgrade
Polycarbonate120 W36 V DC"Compatibility with Volvo…View on Amazon

Detailed Reviews: Best Headlights For Semi Trucks

Z-OFFROAD 4x6 LED

#1 · Best Overall

1. Z-OFFROAD 4×6 LED

  • Lens Material: Polycarbonate
  • Wattage: 108 W
  • Voltage: 12 V DC
  • Compatible with Vehicle Type: Truck

Best for: Kenworth and Peterbilt replacement.

Why it ranks #1: Four-piece DOT-approved set lists Kenworth, Peterbilt, and Freightliner fitments, plus replacement numbers H4651, H4652, H4656, H4666, and H6545.

Four chrome 4×6 sealed-beam replacements cover named Kenworth T-series and Peterbilt 357, 378, and 379 applications, giving truck owners a complete set rather than a single lamp. Hi/Lo operation and compatibility with several H-series replacement numbers make this a practical option when updating an existing four-headlight setup.

The 12-volt assemblies replace H4651, H4652, H4656, H4666, and H6545 units, which helps buyers match common sealed-beam references during a replacement. Listed compatibility includes Kenworth T800, T400, and T600, Peterbilt 357, 378, and 379, and Freightliner FLD 112 and 120. Polycarbonate lenses and a waterproof feature support use in exposed truck lighting positions, while the four-piece set supplies the quantity for a four-lamp arrangement. Check the specific vehicle and headlamp configuration against the listed fitment.

Pros
  • Four-piece set for 4×6 systems
  • Hi/Lo beam operation
  • Replaces several H-series headlight numbers
  • Polycarbonate lens and waterproof feature
Cons
  • The listed electrical specification is 12 volts DC, limiting it to applications matching that supply.

Skip it if you need a heated lens for snow and ice; the C2W 4×6 heated high-beam headlight adds automatic de-icing.

A useful match for owners of listed Kenworth, Peterbilt, and Freightliner trucks replacing four 4×6 lamps with Hi/Lo units. Its 12-volt specification and listed vehicle compatibility are important boundaries; verify the truck's setup before selecting it.

Full product details
BrandZ-OFFROAD
ColorNew Chrome A -4pcs
Compatible with Vehicle TypeTruck
Included ComponentsHeadlights
Item Dimensions15.35 x 4.72 x 10.24 inches
Item Weight7 pounds
Lens ColorClear
Lens MaterialPolycarbonate
ManufacturerZ-OFFROAD
Part NumberSJ-46CEBKA-24001
Manufacturer Warranty Description1 year warranty for quality-related issue since purchasing date
Model NumberSJ-46CEBKA-24
Model Year2024
Special FeatureWaterproof
Voltage12 volts_of_direct_current
Wattage108 watts

Listed on Amazon as: DOT Approved 4×6 LED Headlights Assembly Hi/Lo Sealed Beam Compatible with KW T800 T600 Peterbilt 379 Freightliner Chevy Oldsmobile Cutlass H4651 H4652 H4656 H6545 H4666, 4PCS-Chrome

View on Amazon
Auxbeam 4x6 LED

#2 · Bright Output

2. Auxbeam 4×6 LED

  • Lens Material: Polycarbonate
  • Wattage: 55 W
  • Voltage: 12 V DC
  • Compatible with Vehicle Type: Fit for most vehicles with 2 or 4 headlights…

Best for: Bright four-lamp truck conversion.

Why it ranks #2: Truck fitment includes Kenworth, Peterbilt 357, 378, and 379, and Freightliner FLD; listed output is 3,600 lumens high and 2,800 low.

Auxbeam specifies 3,600 lumens on high beam and 2,800 on low beam, making its brightness figures the central reason to consider this four-piece 4×6 conversion. The set includes H4-to-three-pin connectors and names Kenworth, Peterbilt, and Freightliner applications, supporting a replacement workflow for compatible truck lighting systems.

The projector-lens design is paired with the stated beam outputs, giving buyers concrete high- and low-beam figures to compare when replacing older rectangular lamps. Included H4-to-three-pin connectors support connection to the corresponding vehicle wiring rather than requiring buyers to source those adapters separately. The listed compatibility covers Kenworth T800, T400, and T600, Peterbilt 357, 378, and 379, and Freightliner FLD applications. A four-lamp quantity suits complete replacement; match the truck's exact connector and 4×6 arrangement.

Pros
  • 3,600-lumen high beam
  • 2,800-lumen low beam
  • Four 4×6 LED headlights included
  • Four H4-to-three-pin connectors included
Cons
  • The listed wattage is 55 watts, so buyers requiring a different lamp rating should look elsewhere.

Skip it if you want an automatic lens heater for winter driving; C2W CTW-34136 provides monitored de-icing on its high-beam lamp.

Consider this set when you want stated high- and low-beam lumen figures and included adapters for a compatible Kenworth, Peterbilt, or Freightliner. Its 4×6 format and connector details remain essential fit checks for installation.

Full product details
BrandAuxbeam
ColorBlack
Compatible with Vehicle TypeFit for most vehicles with 2 or 4 headlights (4×6 inch) including but not limited to: Fit for Kenworth T800 T400 T600 W900B W900L Classic 120/132 HK Classic, Fit for Peterbilt Rectangular Headlights 379 378 357, Fit for Chevy K5 K10 K20, Chevy C10 S10, Chevy Silverado V10, Fit for Feightliner fld 12
Included Components4 x 4×6 LED Headlight, 4 x H4 to 3pin Connector
Lens ColorClear
Lens MaterialPolycarbonate
ManufacturerAuxbeam
Part NumberQPAB005938
Model NumberQPAB005938
Model Year2020
Special FeatureHigh Beam, Low Beam, IP67 Waterproof, DOT Approved
Voltage12 volts_of_direct_current
Wattage55 watts

Listed on Amazon as: Auxbeam 4×6 LED Headlights DOT Approved Rectangular Headlamps 4PCS Black

View on Amazon
MAYELLO 4x6 LED

#3 · Longer Warranty

3. MAYELLO 4×6 LED

  • Lens Material: Polycarbonate
  • Wattage: 60 W
  • Voltage: 12 V DC
  • Compatible with Vehicle Type: LED Headlights Compatible with Freightliner…

Best for: Sealed-beam truck replacement.

Why it ranks #3: Names Freightliner FLD, Peterbilt, and Kenworth truck fitments, with 4,500-lumen high beam, 3,000-lumen low beam, and a two-year warranty.

MAYELLO lists 4,500 lumens on high beam and 3,000 on low beam, giving truck owners concrete output figures in a four-piece 4×6 sealed-beam replacement. Its compatibility names Freightliner FLD, Peterbilt 357, 378, and 379, and Kenworth T800, T400, and T600 models.

The 60-watt, 12-volt DC specification identifies the electrical requirements for a compatible truck, while the high- and low-beam ratings distinguish the two operating modes. Its aluminum housing is described as helping avoid water condensation, and the sealed lens is specified to prevent moisture ingress; those details address exposure concerns in headlamp use. The four-piece set suits a multi-lamp replacement, and the listed 4×6 format covers named truck families. Match the vehicle and system before installation.

Pros
  • 4,500-lumen high beam
  • 3,000-lumen low beam
  • Aluminum housing addresses condensation
  • Sealed lens helps keep moisture out
Cons
  • The listing does not provide an IP water-and-dust rating.

Skip it if you require a stated IP67 rating; Partsam 13 lists IP67 protection for its four-piece 4×6 set.

A practical candidate for listed Freightliner, Peterbilt, and Kenworth owners seeking a four-lamp Hi/Lo replacement with specified lumen figures. Its moisture-related construction details are useful, though no IP rating is supplied for comparison.

Full product details
BrandMAYELLO
Color4pcs Chrome 4×6 headlights
Compatible with Vehicle Type‎LED Headlights Compatible with Freightliner FLD120 FLD132 FLD112; Peterbilt 379 378 357;Kenworth KW T800 T400 T600 W900B W900L Classic 120/132 HK; Oldsmobile 98 Calais, Oldsmobile Cutlass Calais Ciera Cruiser Salon Supreme; Oldsmobile Delta 88; Chevy K5 K10 K20 K30 Blazer S10, Chevy Suburban K1500
Item Dimensions13.9 x 3.39 x 6.93 inches
Item Weight5.5 pounds
Lens Colorclear
Lens MaterialPolycarbonate
ManufacturerMAYELLO
Part NumberT001
Manufacturer Warranty Description2 years warranty
Special FeatureHigh Beam, Waterproof
Voltage12 volts_of_direct_current
Wattage60 watts

Listed on Amazon as: MAYELLO 4Pcs 4×6 LED Headlights DOT 60W Hi/Lo Sealed Beam Headlights

View on Amazon
BICYACO 4x6 LED

#4 · DOT Listed

4. BICYACO 4×6 LED

  • Lens Material: Polycarbonate
  • Wattage: 60 W
  • Voltage: 12 V DC
  • Compatible with Vehicle Type: 1975 – 1985 Cadillac Eldorado; 1975 – 1985…

Best for: DOT-listed all-weather set.

Why it ranks #4: Four-piece DOT-compliant set specifically names Kenworth fitment and lists IP67 water protection for operation in varied weather.

DOT compliance paired with IP67 waterproofing gives this four-piece 4×6 set a clear use case: replacing rectangular lamps for drivers who want listed road-use compliance and weather protection. It names Kenworth, Peterbilt, and Freightliner applications, with H-series replacement references to help identify a matching headlamp.

The 60-watt rating and 12-volt DC specification identify the electrical requirements, while the included H4 9003 HB2 wiring harnesses support connection to compatible wiring. IP67 protection is presented for all-weather conditions, including cold-weather operation, which matters for exposed truck lamps. Its listed applications include Kenworth W900 and several Peterbilt and Freightliner models, alongside older passenger vehicles. The four lamps and included instructions make the set suitable for a full replacement, provided the vehicle matches its 4×6 fitment.

Pros
  • DOT-compliant 4×6 headlights
  • IP67 waterproof rating
  • Four H4 9003 HB2 wiring harnesses included
  • 12-volt, 60-watt specification
Cons
  • The supplied fitment details do not name specific Kenworth T-series models.

Skip it if you need named T800 and T600 fitment; Z-OFFROAD SJ-46CEBKA-24 lists both Kenworth series.

This is a sensible candidate for buyers prioritizing DOT compliance and IP67 protection in a four-lamp 4×6 replacement. The included harnesses support installation, but its truck-specific fitment list is less detailed for some Kenworth models.

Full product details
BrandBICYACO
ColorSilver A
Compatible with Vehicle Type1975 – 1985 Cadillac Eldorado; 1975 – 1985 Cadillac Seville, 1975 – 1990 Buick Electra ; 1976 – 1986 Buick LeSabre ; 1982 – 1987 Buick Regal ; 1975 – 1985 Buick Riviera, 1979 – 1983 American Motors Concord; 1980 – 1988 American Motors Eagle; 1979 – 1983 American Motors Spirit, 1979 – 1986 Ford Musta
Included Components1 PCS Instructions, 4 PCS 4×6 Inch LED Headlights, 4 PCS H4 9003 HB2 Wiring Harness
Lens ColorClear
Lens MaterialPolycarbonate
ManufacturerBICYACO
Part NumberBIX-4×6 HEADLIGHT
Manufacturer Warranty DescriptionOne Year Warranty
Model NumberBIX-4686-S
Model Year2018
Special FeatureDOT Approved, Dustproof, High Beam, Low Beam, Shockproof, Waterproof IP67
Voltage12 volts_of_direct_current
Wattage60 watts

Listed on Amazon as: 4 PCS DOT 4×6 Inch LED Headlights Rectangular Replacement H4651 H4652 H4656 H4666 H6545 Compatible with Peterbilt Kenworth Freightliner Ford Probe Oldsmobile Cutlass

View on Amazon
Partsam 4x6 LED

#5 · High Beam Output

5. Partsam 4×6 LED

  • Lens Material: Polymethyl methacrylate
  • Wattage: 45 W
  • Voltage: 12 V
  • Compatible with Vehicle Type: Truck,tractor,SUV,ATV,UTV,Four-wheel drive…

Best for: Plug-and-play sealed-beam update.

Why it ranks #5: Lists Kenworth and Peterbilt truck compatibility, H4/9003 connection, and high-beam output of 5,600 lumens per bulb.

Partsam combines a plug-and-play H4/9003 connection with high and low beams, giving compatible truck owners a direct workflow for updating a four-lamp sealed-beam setup. Its specified 5,600-lumen high beam and 2,500-lumen low beam provide concrete output figures, and the listing names Kenworth 900-series and Peterbilt 379 applications.

The H4/9003 connector and plug-and-play description support installation without extensive modification on a matching system. High-beam output is listed at 5,600 lumens and low beam at 2,500 lumens per bulb, giving buyers a clear comparison point for the two operating modes. An IP67 rating and aluminum shell with heatsink support weather exposure and heat management. The four-piece quantity suits a multi-lamp replacement, but confirm the lamp dimensions and connector against the vehicle's existing setup.

Pros
  • H4/9003 plug-and-play connection
  • 5,600-lumen high beam per bulb
  • 2,500-lumen low beam per bulb
  • IP67 rating and aluminum heatsink
Cons
  • The listed lens material is polymethyl methacrylate rather than polycarbonate.

Skip it if you want polycarbonate lenses and Kenworth T800 fitment explicitly listed; Z-OFFROAD SJ-46CEBKA-24 provides both details.

This set suits buyers seeking H4/9003 installation and stated beam outputs for a compatible Kenworth or Peterbilt truck. Its IP67 rating supports exposed use, while the existing connector and 4×6 lamp arrangement determine whether it fits.

Full product details
BrandPartsam
Color4×6 LED Headlight
Compatible with Vehicle TypeTruck,tractor,SUV,ATV,UTV,Four-wheel drive off- road vehicles
Item Dimensions6.7 x 4.3 x 3.5 inches
Lens ColorClear
Lens MaterialPolymethyl methacrylate
ManufacturerPartsam
Part Number‎GTCV-0285547816
Model Number13
Model Year1955
Special Feature2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984 1983 Jeep Oldsmobile Peugeot Plymouth Pontiac Renault Saab Toyota Volkswagen Yugo XJ & YJ MODELS Chevrolet Dodge Buick Acura Express Astro Tahoe S10 D350 W250 Ram Reatta W150 Blazer Conquest Integra Corvette D2
Voltage12 volts
Wattage45 watts

Listed on Amazon as: Partsam 4PCS 4×6 LED Headlights Sealed Beam 6×4 H4651 H4666 H4656 Compatible with Kenworth KW 900/Peterbilt 379/Truck/K10 K20 Van RV Camper Headlamp Assembly

View on Amazon
TRUE MODS 4x6 LED

#6

6. TRUE MODS 4×6 LED

  • Lens Material: Polycarbonate
  • Wattage: 28.8 W
  • Voltage: 12 V
  • Compatible with Vehicle Type: Car, SUV, Truck

Best for: H4 plug-in 4×6 replacement.

Why it ranks #6: Four-piece sealed-beam replacement lists Peterbilt and Kenworth use, a 5-inch H4 pigtail, and IP67 water and dust protection.

A pre-attached five-inch H4 pigtail is the clearest practical distinction here: it gives a compatible 4×6 replacement a ready-made connector instead of requiring a separate bulb-base connection. The four black-panel lamps offer high/low beam operation for buyers refreshing a Peterbilt or Kenworth sealed-beam arrangement.

The H4 socket plug and pre-attached pigtail support a straightforward connection workflow for a vehicle using the matching H4 setup. Its 4×6 format and listed H4651, H4652, H4656, H4666, and H6545 references help narrow compatibility for sealed-beam replacements. A polycarbonate lens and IP67 water-and-dust protection support all-weather use, while the four-piece quantity suits a multi-lamp installation. Confirm the truck's connector and 4×6 configuration against these details before ordering.

Pros
  • Four-piece 4×6 set
  • Pre-attached five-inch H4 pigtail
  • High/low beam function
  • IP67 water and dust protection
Cons
  • The listed electrical specification is 12 volts, so it does not suit a system requiring another voltage.

Skip it if you need a four-lamp kit with listed Kenworth T800 fitment; Z-OFFROAD SJ-46CEBKA-24 names that truck series.

Consider this set if your Peterbilt or Kenworth uses 4×6 sealed beams and an H4 connection, especially when the pigtail simplifies the wiring step. Its fit depends on matching the listed connector, lamp format, and 12-volt specification.

Full product details
BrandONLINE LED STORE
ColorBlack
Compatible with Vehicle TypeCar, SUV, Truck
Item Dimensions15.75 x 7.75 x 5.75 inches
Item Weight5.4 pounds
Lens ColorClear
Lens MaterialPolycarbonate
ManufacturerONLINE LED STORE
Part NumberCAZLEDHDL1464
Model Year2018
Special Feature4×6 High Low Beam, 2a1 1a1 H4652 H4666 H6545 H4651 H4656 Sealed Beam LED Reflector, H4 Socket Plug
Voltage12 volts
Wattage28.8 watts
Additional InformationImportant Information This toy is a small ball. Not for children under 3 yrs.

Listed on Amazon as: TRUE MODS 4pc 4×6 LED Headlights H4 2A1 Sealed Beam for Peterbilt Kenworth

View on Amazon
AMUNIESUN 4x6 Halo

#7

7. AMUNIESUN 4×6 Halo

  • Lens Material: Polycarbonate
  • Wattage: 45
  • Voltage: 12 V
  • Compatible with Vehicle Type: H4651 H4652 H4656 H4666 H4668 H6545…

Best for: Halo and signal lighting upgrade.

Why it ranks #7: Lists Kenworth, Peterbilt, and Freightliner fitments, with high and low beams, white DRL, amber turn signal, and IP67 protection.

Four lighting patterns—high beam, low beam, white DRL, and amber turn signal—make this 4×6 set a choice for drivers seeking more than a basic beam replacement. The halo-style lamps list Kenworth T-series, Peterbilt, and Freightliner FLD fitments, combining road illumination with daytime and signal functions.

The H4 plug supports connection to a compatible harness, while the 4×6 format and listed H-series references help identify replacement applications. A 5000K–6000K color temperature and IP67 waterproof rating are specified for the lamps; the aluminum shell and heatsink provide the stated heat-dissipation hardware. The four patterns offer separate lighting roles in one assembly, but installation depends on a compatible 12-volt system and wiring for the DRL and turn-signal functions.

Pros
  • High- and low-beam patterns
  • White DRL and amber turn signal
  • IP67 waterproof rating
  • Aluminum shell and heatsink
Cons
  • The listed voltage is 12 volts, excluding applications that require a different supply.

Skip it if you need automatic snow clearing instead of halo functions; the C2W CTW-34136 high-beam lamp heats its lens.

A fit for owners of listed trucks who want DRL and amber signal functions alongside high and low beams. Check the 12-volt supply, 4×6 format, and wiring needs for its added lighting patterns before choosing it.

Full product details
BrandAMUNIESUN
ColorWhite
Compatible with Vehicle TypeH4651 H4652 H4656 H4666 H4668 H6545 Headlights, Kenworth T800 T400 T600, Peterbilt 357 378 379, FREIGHTLINER FLD 112 120, Western Star 4900, Toyota Camry, Mazda 626, Dodge St. Regis, Dodge Diplomat, Dodge Daytona, Dodge Dakota, Dodge Charger, Dodge Challenger, Dodge Caravan, Dodge 600, Chrysler Town
Lens ColorClear
Lens MaterialPolycarbonate
ManufacturerAMUNIESUN
Part Number4X6P4ANGELHALO
Model Number4X6P4ANGELHALO
Model Year2013
Special Feature12v-24v, Waterproof, Wide applications that fit up to 99% of vehicles, including sedans, light SUVs and trucks, motorcycles, and off-road vehicles,high low beam, replace H4651, h4652, h4656, h4666, h6547 See more
Voltage12 volts
Wattage45

Listed on Amazon as: 4 PCS DOT Approved 4×6 Inch Halo Headlights Replacement H4651 H4652 H4656 H4666 H6545 Compatible With Peterbilt Kenworth Freightinger Ford Probe

View on Amazon
C2W Heated High Beam

#8

8. C2W Heated High Beam

  • Lens Material: Polycarbonate
  • Voltage: 12 V
  • Compatible with Vehicle Type: Truck

Best for: Snow-prone high-beam truck use.

Why it ranks #8: A truck-specific 4×6 high beam for Freightliner, Peterbilt, and Kenworth uses automatic lens de-icing and a standard H4 connector.

An automatic lens heater separates this 4×6 high-beam lamp from standard replacements: it de-ices and defrosts the lens, then shuts heating off after snow and ice clear. That operation targets truck drivers facing frozen lamp surfaces who need a Freightliner, Peterbilt, or Kenworth-compatible high beam.

The integrated monitoring system controls the heater, turning it off when the lens is clear rather than leaving it running continuously. A standard H4-style connector supports plug-and-play installation where the truck uses that connector. The polycarbonate lens, housing, and electronics are described as corrosion-resistant and resistant to shock and vibration, useful properties for truck service. This is a high-beam-only lamp rated at 1,000 lumens, so it should be considered as a specific beam-position replacement, not a complete Hi/Lo set.

Pros
  • Automatic lens de-icing and defrosting
  • Heater shuts off after lens clears
  • Standard H4-style connector
  • Polycarbonate construction resists shock and vibration
Cons
  • High-beam only; it does not provide a low-beam function.

Skip it if you need a complete Hi/Lo four-lamp set; BICYACO BIX-4686-S supplies four 4×6 headlights for a replacement set.

Choose this for a compatible truck's high-beam position when snow and ice regularly cover the lens. Its automatic heater and H4 connector are useful boundaries to assess, and the high-beam-only design means it cannot replace both beam functions.

Full product details
BrandC2W
ColorBlack
Compatible with Vehicle TypeTruck
Item Weight2 pounds
Lens ColorClear
Lens MaterialPolycarbonate
ManufacturerC2W
Part NumberCTW-34136
Model NumberCTW-34136
Model Year1996
Special FeatureHigh Beam
Voltage12 volts

Listed on Amazon as: Heated LED High-Beam Headlight Compatible with Freightliner

View on Amazon
LEDUR 4x6 Halo

#9

9. LEDUR 4×6 Halo

  • Lens Material: Polycarbonate
  • Wattage: 120 W
  • Voltage: 12 V DC
  • Compatible with Vehicle Type: Compatible With Buick…

Best for: Halo signal and DRL combination.

Why it ranks #9: The listing includes semi trucks among compatible vehicle types and specifies halo eyes, amber turn signals, white DRLs, and 12-to-24-volt DC use.

Angel-eye halos, amber turn signals, and white DRLs add three lighting functions to this four-piece 4×6 LED set, alongside its role as a headlight replacement. LEDUR lists broad applications across classic trucks, vans, semis, SUVs, RVs, tractors, buses, pickups, and cars, making it relevant to varied older-vehicle builds.

The 4×6 format and four-piece quantity suit vehicles using a matching rectangular lamp arrangement, while the halo, amber signal, and white DRL functions expand what the assemblies can do beyond headlighting. The listing describes compatibility with most 12–24-volt vehicles and names older truck and semi applications, but the vehicle's wiring must support the added signal and daytime-light functions. Polycarbonate lenses are specified. Consult the supplied vehicle list and electrical range when assessing a replacement or upgrade.

Pros
  • Four 4×6 LED headlights
  • Angel-eye halo function
  • Amber turn signals
  • White DRLs
Cons
  • The supplied fitment information does not name specific Kenworth or Peterbilt truck models.

Skip it if you need explicit Kenworth T800 and Peterbilt 379 fitment; MAYELLO 4×6 60W headlights list both truck models.

This set suits owners of compatible classic trucks or semis who want halo, DRL, and turn-signal functions with their 4×6 headlights. Confirm the vehicle's wiring and listed fitment, especially when seeking a named truck-model match.

Full product details
BrandLEDUR
Color4×6 LED Headlights With Turn Signals
Compatible with Vehicle TypeCompatible With Buick Century(1976-1977,1982-1985)/Electra(1976-1986,1988-1989)/Estate(1976-1983)/Le Sabre(1976-1986,1988-1990)/Regal(1976-1977,1981-1987)/Riviera(1975-1985)/Skyhawk(1975-1978,1982-1988)/Skylark(1986-1988)/Somerset(1986-1987), Compatible With Chevy Bel Air(1981)/Blazer(1981-1988)/Cam
Included Components1 X Manual, 4×6 Halo LED Headlights 4PCS-5S3
Item Dimensions6 x 4 x 4 inches
Lens ColorClear
Lens MaterialPolycarbonate
ManufacturerLEDUR
Part Number4×6 LED Halo Headlights
Manufacturer Warranty Description2 Year Manufacturer
Model NumberLEDUR 4×6 LED Headlights
Model Year2025
Special FeatureIntegrated Amber Halo Turn Signals, Integrated Halo Angel Eye, Integrated White Halo DRL, Waterproof
Voltage12 volts_of_direct_current
Wattage120 watts

Listed on Amazon as: 4×6 LED Headlights DOT Approved 4PCS Angel Eye Halo Turn Signal DRL

View on Amazon
BAOLICY 4x6 LED

#10

10. BAOLICY 4×6 LED

  • Lens Material: Polycarbonate
  • Wattage: 120 W
  • Voltage: 36 V DC
  • Compatible with Vehicle Type: "Compatibility with Volvo…

Best for: Wide-view two-lamp upgrade.

Why it ranks #10: Its listed vehicle examples do not establish semi-truck fitment, and its stated 36-volt specification makes exact electrical compatibility especially important to verify.

BAOLICY's lens arrangement is intended to spread low-beam light across a wider road view while providing a beam cutoff, with all six lenses used for high beam. The two-piece 4×6 set also claims high-beam reach up to 300 feet, making it a targeted option for compatible rectangular-headlamp vehicles.

On low beam, one hemispherical lens and four D-shaped lenses produce the listed wider illumination and cutoff; high beam uses all six lenses for the stated longer-range view. That distinction gives drivers separate near-road and distance lighting modes. The product names several vehicle applications, including Isuzu NPR, FRR, NQR, FXR, FVR, and FTR, and is described as fitting many 4×6 stock-headlamp vehicles. Its specifications list 36 volts DC, a critical electrical requirement to match before installation.

Pros
  • Two-piece 4×6 set
  • Six-lens high-beam arrangement
  • Low beam uses a cutoff design
  • Lists Isuzu NPR and other truck applications
Cons
  • The listed 36-volt specification limits use to matching electrical systems.

Skip it if you need a listed 12-volt truck set; MAYELLO 4×6 60W headlights specify 12 volts and name Freightliner FLD models.

This option is for buyers whose vehicle matches the listed 4×6 applications and 36-volt supply, with interest in its separate wide low beam and longer-range high beam. The voltage is a key fit boundary for truck owners.

Full product details
BrandBAOLICY
ColorBAOLICY 4X6 LED Headlighs White
Compatible with Vehicle Type"Compatibility with Volvo Modes:WCM-WIM,760,240 Series,260 Series,740 Series,DL —— Compatible With Toyota Modes:Camry,Celica,Corona,Cressida,Land Cruiser,Van —— Compatible With Isuzu Modes:Impulse,NPR,FRR,NQR,FXR,FVR,FTR —— Compatible with Subaru Modes:DL,GL,GL-10", "Compatible With Chevr-olet Modes
Included Components1 PCS Installation instruction, 2PCS Rectangular 4X6 in LED Headlights
Item Dimensions6.64 x 3.98 x 4.25 inches
Item Weight1.4 pounds
Lens Colorclear
Lens MaterialPolycarbonate
ManufacturerBAOLICY
Part NumberBAOLICY 4×6 LED Headlighs 5S2 2PCS
Manufacturer Warranty Description2 Years
Model NumberBAOLICY 4×6 LED Headlighs 5S2 2PCS HL
Model Year2024
Special FeatureCorrosion Resistant, Dustproof, Impact Resistant, Shockproof, Waterproof,, Easy Installation, High Beam, Low Beam, White DRL, Amber Turn Signals See more
Voltage36 volts_of_direct_current
Wattage120 watts

Listed on Amazon as: 4×6 Inch LED Headlights DOT Approved High Low Beam 2PCS Rectangle

View on Amazon

Avoid 4×6 fitment and wiring traps

A 4×6 label alone does not prove a headlight will fit your truck or connect correctly. Several listings cover different layouts: Z-OFFROAD lists common 4×6 replacement numbers and truck families, while Auxbeam says it fits vehicles with two or four 4×6 headlights and includes H4-to-3-pin connectors. TRUE MODS specifies an H4 socket and attached pigtail, and Partsam lists an H4/9003 connection.

Treat these details as prompts to inspect your current lamp, not as universal interchangeability. Count the lamps, read the markings on the old sealed beams, compare connector shapes, and verify the exact truck year and trim with the seller or manufacturer.

Also check the vehicle’s electrical system: most options list 12 volts, while BAOLICY lists 36 volts. A mismatch in lamp count, connector, or voltage can make an otherwise attractive replacement unsuitable.

Plan for winter lens icing and beam coverage

Choose a specific winter feature only when its trade-offs match your route and headlamp needs. The C2W is the only listed option with automatic heating and de-icing, but it is identified as a high-beam headlight, not a complete high/low-beam set. Its listing describes an integrated system that turns heating off after snow and ice clear, so confirm the required side and quantity before treating it as a full replacement.

For all-weather sealing instead, BICYACO, TRUE MODS, and AMUNIESUN list IP67 protection, but that is not the same feature as actively clearing ice. Beam functions also differ: halo sets add DRLs or turn signals, while conventional sealed-beam replacements focus on high and low beams.

Decide whether you need a full matched set, a single high-beam replacement, or extra signaling functions before comparing brightness claims.

How to Choose Semi-Truck Headlights

Truck and sealed-beam fitment

Look first for an explicit match to your truck family, lamp size, and replacement number. Z-OFFROAD names Kenworth T800, T400, T600, and W900 variants, Peterbilt 357, 378, and 379, and Freightliner FLD models; MAYELLO also lists FLD, Peterbilt, and Kenworth applications. Several products identify 4×6 dimensions or H4651/H4656-family numbers, but fitment lists are not identical.

Drivers replacing a known 4×6 sealed beam should compare the old lamp markings and headlamp count against the listing. If your truck is a named model but the year or connector is unclear, prioritize verification over a broad compatibility claim.

Beam functions and output figures

Match the beam configuration to the job: a full replacement generally needs both high and low beams, while C2W is specifically listed as a high-beam lamp. Published output figures vary: Auxbeam lists 3,600 lumens high and 2,800 low, MAYELLO lists 4,500 high and 3,000 low, and Partsam lists 5,600 high and 2,500 low per bulb. These figures are not a direct comparison of real-road beam performance, so do not select by lumens alone.

A driver replacing a complete set should confirm both beam functions and quantity; someone replacing only a high-beam position may find C2W’s narrower configuration relevant.

Weather features and electrical details

Check the listed voltage, connector, and weather features against the truck before choosing. Most options specify 12 volts, while BAOLICY lists 36 volts and LEDUR describes compatibility with 12-to-24-volt DC vehicles. Connector details range from TRUE MODS’ H4 pigtail and Partsam’s H4/9003 connection to Auxbeam’s included H4-to-3-pin connectors.

For water and dust protection, TRUE MODS, BICYACO, and AMUNIESUN list IP67; C2W instead highlights automatic lens heating for ice and snow. A truck regularly operating in freezing conditions may make active heating a priority, while a driver seeking a multi-lamp sealed-beam swap may prefer a compatible complete set with matching connectors.

Which Headlights Should Your Semi Truck Use?

For a four-piece replacement on a listed Kenworth, Peterbilt, or Freightliner application, choose the Z-OFFROAD 4×6 LED: it combines DOT approval, several truck-specific fitments, and common replacement numbers. If beam-output figures are your priority, Auxbeam 4×6 LED lists 3,600 lumens high and 2,800 low, while MAYELLO 4×6 LED names the same truck families and lists 4,500 high and 3,000 low. For winter icing, consider C2W Heated High Beam only if you need a high-beam lamp and have confirmed the required quantity.

Choose AMUNIESUN 4×6 Halo when DRL and amber turn-signal functions matter. Before ordering any option, confirm the truck’s exact 4×6 layout, voltage, connector, and model-specific fitment.

Frequently Asked Questions

How can I confirm whether my semi truck uses 4×6 sealed-beam headlights?

Check the owner’s manual, existing lamp markings, and headlamp opening to confirm the size and type. Compare the replacement numbers and fitment information in the product listing with your truck’s exact model and configuration. If those details do not match or remain unclear, ask a qualified parts specialist before ordering.

Do DOT-approved replacement headlights still need beam-pattern aiming after installation?

Yes. DOT approval does not ensure that the installed beam is aimed correctly for your truck. Follow the vehicle manufacturer’s aiming procedure after installation, or have a qualified technician check it.

Correct aiming helps direct the light as intended and avoids a beam pattern that is too high, low, or misaligned.

Can LED headlights cause flicker or electrical compatibility issues on older trucks?

They can, so confirm electrical compatibility before buying. Check your truck’s voltage, connector, headlamp layout, and the replacement’s stated requirements; the featured Z-OFFROAD listing specifies 12 volts. If the listing does not clearly match your truck or flicker occurs after installation, consult a qualified technician rather than assuming the lamp is compatible.

What should I check before choosing a heated high-beam replacement?

Confirm that you need a high-beam lamp and verify how many lamps your truck requires. The heated option is listed as a high-beam headlight compatible with Freightliner, but that alone does not establish fitment for every model or the quantity needed. Check your truck’s exact application and the listing before ordering.

What should I verify when choosing headlights with halo or signal functions?

Check that the listing’s functions match what you need and that your truck supports the required connections. The product titles identify halo options, and one specifies turn-signal and DRL functions; those features do not establish exact vehicle fitment. Confirm your truck’s connector, voltage, headlamp layout, and model-specific compatibility before buying.

Final Words

For a four-piece replacement on a listed Kenworth, Peterbilt, or Freightliner application, the Z-OFFROAD 4×6 LED is the clearest overall choice, provided its fitment matches your truck. Prioritize listed output figures instead with Auxbeam or MAYELLO, consider the heated high-beam option only when its lamp type and quantity fit your need, and choose halo functions when those are useful. Before ordering, verify layout, voltage, connector, and exact model fitment.

Leave a Reply

Your email address will not be published. Required fields are marked *