A strong trailer ramp choice gives you a suitable load capacity, a secure trailer-deck connection, and enough length and width for the vehicle you plan to load. The VEVOR Aluminum Ramps, 60-inch pair, lead this selection with a stated 6,000-pound capacity, aluminum construction, full-width hook ends, and safety straps. Other options range from short steel shed ramps to 72-inch aluminum ramps rated for heavier loads, so the right fit depends on your trailer height, vehicle weight, and loading approach.
Compare the products’ listed dimensions and capacity carefully: some listings contain conflicting details, and ramp capacity may be stated for a pair or an individual ramp. Check the manufacturer’s instructions and confirm the intended capacity basis before loading.
The VEVOR Aluminum Ramps, 60-inch pair are the strongest all-around match for trailer loading in this selection. They are aluminum, measure 60 by 12 inches, and have a stated 6,000-pound capacity, plus full-width hook ends and adjustable safety straps. Those features address portability, load support, and attachment in one package.
If you need more length or a higher stated capacity, consider the 72-inch VEVOR pair, but verify the product’s capacity and fit against your trailer and vehicle before use.
Our Top Picks
Best OverallThe 60-by-12-inch aluminum pair has a stated 6,000-pound capacity, full-width hook ends, and adjustable safety straps for trailer loading.
View on Amazon
Highest CapacityIts 72-by-15-inch title dimensions and stated 8,810-pound capacity suit heavier equipment; rungs, an attaching end, and straps support loading security.
View on Amazon
Widest RampsAt 15 inches wide and 60 inches long, this aluminum pair is specifically described for trailer use and supports motorcycles, mowers, and off-road vehicles.
View on Amazon- Longest Ramps labwork 84-Inch Aluminum Ramps
Compare Trailer Ramp Options and Key Details
| # | Product | Dimensions | Weight | Load Capacity | Material | Buy |
|---|---|---|---|---|---|---|
| 1 | 1. VEVOR 60-Inch Aluminum RampsBest Overall | 60"L x 12"W x 2.36"H | 30 lb | 6000 lb | Aluminum | View on Amazon |
| 2 | 2. VEVOR 72-Inch Aluminum RampsHighest Capacity | 15"L x 4.1"W x 72"H | 61 lb | 8.81E+3 lb | Aluminum | View on Amazon |
| 3 | 3. HECASA 60-Inch Trailer RampsWidest Ramps | 60"L x 15"W x 2.25"H | 55.1 lb | — | Aluminum | View on Amazon |
| 4 | 4. Silscvtt 60-Inch Aluminum RampsSecured 60-inch aluminum loading | 60"L x 12"W x 2"H | — | 6000 lb | Aluminum | View on Amazon |
| 5 | 5. labwork 84-Inch Aluminum RampsLongest Ramps | 84"L x 14"W x 2.5"H | 30300 g | 3000 lb | Aluminum | View on Amazon |
| 6 | 6. LIEKUMM 4-Foot Aluminum RampsShort-height aluminum loading | 47.4"L x 13.4"W x 2.75"H | 20 lb | 3520 lb | Aluminum | View on Amazon |
| 7 | 7. WheelX Aluminum Loading RampsLong approach for lighter equipment | 45"L x 15"W x 11.31"H | 40 lb | 1.9E+3 lb | Aluminum | View on Amazon |
| 8 | 8. ALMULOO Aluminum Trailer RampsWide aluminum vehicle compatibility | 15.35"L x 5.51"W x 50"H | — | 6800 lb | Plastic | View on Amazon |
| 9 | 9. Arejonner Folding Loading RampsFolding steel ramp pair | 72.5"L x 8.7"W x 1.8"H | 34.1 lb | 1500 lb | Alloy Steel | View on Amazon |
| 10 | 10. Stalwart 35.5-Inch RampsCompact shed and trailer loading | 35.5"L x 8.5"W x 2"H | 9 lb | 600 lb | Alloy Steel | View on Amazon |
Detailed Reviews: Best Loading Ramps For Trailers

#1 · Best Overall
1. VEVOR 60-Inch Aluminum Ramps
- Dimensions: 60"L x 12"W x 2.36"H
- Weight: 30 lb
- Load Capacity: 6000 lb
- Material: Aluminum
Best for: High-capacity aluminum trailer pair.
Why it ranks #1: The 60-by-12-inch aluminum pair has a stated 6,000-pound capacity, full-width hook ends, and adjustable safety straps for trailer loading.
A 6,000-pound pair capacity gives the VEVOR ramps room for substantial loading jobs, while their 60-inch length and 12-inch width suit truck beds and trailers. Aluminum construction keeps the pair portable compared with a steel setup, making these a practical option for moving motorcycles, ATVs, UTVs, tractors, or bicycles.
The full-width hook attaching ends are intended to secure the ramps to a loading edge, while the rung-style surface adds friction under vehicle tires. An extension plate and adjustable safety straps provide additional ways to keep the ramps in position during loading. Together, these features support a more controlled loading workflow; the 60-inch length and 12-inch width give buyers clear dimensions to compare with their vehicle and trailer arrangement before use.
- 6,000-pound stated load capacity
- Aluminum construction
- 60-inch length and 12-inch width
- Full-width hook ends, extension plate, and adjustable safety straps
- The 60-inch length may be limiting when a longer approach is needed.
Skip it if you need a ramp longer than 60 inches; the labwork 84-inch pair offers a longer loading surface.
For buyers moving two- or four-wheeled vehicles onto a truck bed or trailer, this VEVOR pair combines aluminum portability with a stated 6,000-pound capacity. Check that its 60-inch length suits your loading height and approach.
Full product details
| Brand | VEVOR |
|---|---|
| Color | Silver |
| Included Components | 2 x Aluminum Ramps |
| Dimensions | 60"L x 12"W x 2.36"H |
| Item Weight | 30 pounds |
| Load Capacity | 6000 Pounds |
| Manufacturer | VEVOR |
| Part Number | 6000 lbs Aluminum Ramps |
| Manufacturer Warranty Description | None. |
| Material | Aluminum |
| Model Number | Heavy-Duty Ramps |
Listed on Amazon as: VEVOR Aluminum Ramps, 60" L x 12" W, 2Pcs
View on Amazon
#2 · Highest Capacity
2. VEVOR 72-Inch Aluminum Ramps
- Dimensions: 15"L x 4.1"W x 72"H
- Weight: 61 lb
- Load Capacity: 8.81E+3 lb
- Material: Aluminum
Best for: Longer heavy-load aluminum ramps.
Why it ranks #2: Its 72-by-15-inch title dimensions and stated 8,810-pound capacity suit heavier equipment; rungs, an attaching end, and straps support loading security.
A stated 8,810-pound capacity sets these 72-inch VEVOR ramps apart for buyers handling heavier equipment. Their 15-inch width and aluminum construction extend the loading surface for motorcycles, tractors, ATVs, UTVs, trucks, and lawn mowers, while rung-style traction and a top hook end address grip and attachment during loading.
The 72-inch length gives a longer ramp surface than a 60-inch model, which can help when the loading arrangement calls for more ramp length; check the height and approach before use. A 15-inch width accommodates a range of listed vehicle types, and the rung design adds tire friction. The top hook attaching end helps connect the ramp to the loading edge, while adjustable safety straps and an extension plate add further means of securing it.
- 72-inch length
- 15-inch width
- 8,810-pound stated capacity
- Rung surface, top hook end, extension plate, and adjustable safety straps
- The pair weighs about 61 pounds, making it a substantial set to move.
Skip it if you prioritize a lighter ramp pair for frequent handling; the Stalwart set weighs 9 pounds and is intended for loads up to 1,200 pounds combined.
Choose this VEVOR pair for heavier equipment loading where its 72-inch length and stated capacity suit the job. Its roughly 61-pound pair weight matters for frequent repositioning, and the loading edge must work with the hook end.
Full product details
| Brand | VEVOR |
|---|---|
| Color | Silver |
| Included Components | 1 Pair of Gloves, 1 x User Manual, 2 x 12*130 mm Stainless Steel Long Screw (with Pin), 2 x Aluminum Ramps with Flat Ends |
| Dimensions | 15"L x 4.1"W x 72"H |
| Item Weight | 61 pounds |
| Load Capacity | 8.81E+3 pounds |
| Manufacturer | VEVOR |
| Part Number | 6800 lbs Universal Loading Ramp |
| Manufacturer Warranty Description | None. |
| Material | Aluminum |
| Model Number | AGR-210-1838-1 |
Listed on Amazon as: VEVOR Aluminum Ramps, 8810 lbs, Heavy-Duty Ramps with Top Hook Attaching End, Universal Loading Ramp for Motorcycle, Tractor, ATV/UTV, Trucks, Lawn Mower, 72" L x 15" W, 2Pcs
View on Amazon
#3 · Widest Ramps
3. HECASA 60-Inch Trailer Ramps
- Dimensions: 60"L x 15"W x 2.25"H
- Weight: 55.1 lb
- Material: Aluminum
Best for: Wide-surface mixed-vehicle loading.
Why it ranks #3: At 15 inches wide and 60 inches long, this aluminum pair is specifically described for trailer use and supports motorcycles, mowers, and off-road vehicles.
At 15 inches wide, the HECASA ramps provide a broader stated track than many compact trailer ramps, giving motorcycle and bicycle tires, as well as off-road vehicles and mowers, a wide surface to cross. Their 60-inch aluminum construction pairs that loading area with a material described as resistant to rust and deformation.
The 60-inch length and 15-inch width give buyers concrete dimensions for matching a trailer or truck loading approach to the vehicle. HECASA lists use for two-wheelers such as motorcycles and bicycles, along with four-wheelers including off-road vehicles and lawn mowers. High-strength aluminum is described as lighter and more resistant to rust or deformation, which supports outdoor use and makes the ramp material easier to handle than a comparable steel construction.
- 15-inch ramp width
- 60-inch length
- Aluminum construction
- Listed for motorcycles, bicycles, off-road vehicles, and lawn mowers
- No load capacity is stated in the supplied specifications.
Skip it if you need a documented load rating before choosing; the VEVOR 60-inch ramps state a 6,000-pound capacity.
This pair suits buyers seeking a 15-inch-wide aluminum track for motorcycles, bicycles, off-road vehicles, or lawn mowers. Its listed dimensions support fit planning, but buyers needing a stated capacity should choose a ramp with one supplied.
Full product details
| Brand | HECASA |
|---|---|
| Color | Silver |
| Item Weight | 55.1 pounds |
| Material | Aluminum |
| Dimensions | 60"L x 15"W x 2.25"H |
Listed on Amazon as: HECASA 60''X 15''Trailer Ramp Universal 6800 LBS Truck Bike Motorcycle Loading Ramps Hook End Knife Foot Pair (NN1771)
View on Amazon
#4
4. Silscvtt 60-Inch Aluminum Ramps
- Dimensions: 60"L x 12"W x 2"H
- Load Capacity: 6000 lb
- Material: Aluminum
Best for: Secured 60-inch aluminum loading.
Why it ranks #4: This 60-by-12-inch aluminum pair has a stated 6,000-pound capacity, with rung traction, an extension plate, and adjustable safety straps.
Adjustable safety straps and an extension plate are the Silscvtt pair's key loading aids, helping keep these 60-inch aluminum ramps firmly in place. Rung-style surfaces add friction, while the stated 6,000-pound capacity suits buyers loading two- or four-wheeled equipment where the ramp dimensions match their setup.
Each ramp measures 60 inches long and 12 inches wide, giving buyers a defined footprint to compare with their trailer or truck bed. The rung design increases friction, and the extension plate plus adjustable safety straps are specified to help resist sliding or tipping. A stair-step design is described as distributing weight evenly, while the aluminum ramps are welded and have smooth surfaces without sharp edges, making handling and positioning more practical.
- 6,000-pound stated capacity
- 60-inch length and 12-inch width
- Rung design for increased friction
- Extension plate and adjustable safety straps
- The 60-inch length can be too short for loading setups that need a longer approach.
Skip it if you need a longer loading approach; the labwork 84-inch aluminum ramps extend farther than this 60-inch pair.
This pair suits buyers who want 60-inch aluminum ramps with straps and an extension plate for loading onto a compatible truck or trailer. Its dimensions and 6,000-pound rating should match the vehicle and loading arrangement.
Full product details
| Brand | Silscvtt |
|---|---|
| Color | Silver |
| Dimensions | 60"L x 12"W x 2"H |
| Load Capacity | 6000 pound |
| Manufacturer | Silscvtt |
| Part Number | TR-2579435-582589-SS |
| Material | Aluminum |
| Model Number | Does not Apply |
Listed on Amazon as: Silscvtt 2 Pcs 60 Inch x 12 Inch Aluminum Trailer Ramps
View on Amazon
#5 · Longest Ramps
5. labwork 84-Inch Aluminum Ramps
- Dimensions: 84"L x 14"W x 2.5"H
- Weight: 30300 g
- Load Capacity: 3000 lb
- Material: Aluminum
Best for: Long aluminum truck-bed approach.
Why it ranks #5: The 84-by-14-inch aluminum pair offers extra length and hook attachment ends, though its title and specifications give different capacity figures.
An 84-inch length gives the labwork ramps a long approach for loading motorcycles, dirt bikes, lawn mowers, or ATVs onto trucks and trailers. Their aluminum construction is described as lighter than steel, and the hook attachment end fits into a rear slot or onto a car-hauler trailer deck.
The 84-inch length and 14-inch width give buyers substantial ramp dimensions to compare with their truck bed or trailer layout. A hook attachment end is specified to fit into a rear slot or hold on car-hauler trailer decks, supporting placement at the loading edge. The listing describes single-ramp use for dirt bikes, bicycles, or motorcycles and pair use for lawn mowers, trucks, and ATVs. The supplied specifications state a 3,000-pound capacity.
- 84-inch length
- 14-inch width
- Aluminum construction described as lighter than steel
- Hook attachment end for rear slots or trailer decks
- The supplied specifications state a 3,000-pound capacity.
Skip it if you need a shorter ramp for compact storage; the Stalwart 35.5-inch set takes a shorter form, with a lower combined capacity.
The labwork ramps suit buyers needing a long aluminum track and hook attachment for a truck or car-hauler deck. Check the 84-inch length against available storage and the stated 3,000-pound capacity against the load.
Full product details
| Brand | labwork |
|---|---|
| Color | Silver |
| Dimensions | 84"L x 14"W x 2.5"H |
| Item Weight | 30300 g |
| Load Capacity | 3000 pounds |
| Manufacturer | labwork |
| Part Number | 1-6278005-219514 |
| Manufacturer Warranty Description | Does not apply. |
| Material | Aluminum |
| Model Number | Does not apply |
Listed on Amazon as: labwork 1 Pair 84 Inch x 14 inch Aluminum Ramps 6500LBS
View on Amazon
#6
6. LIEKUMM 4-Foot Aluminum Ramps
- Dimensions: 47.4"L x 13.4"W x 2.75"H
- Weight: 20 lb
- Load Capacity: 3520 lb
- Material: Aluminum
Best for: Short-height aluminum loading.
Why it ranks #6: The 47.4-by-13.4-inch aluminum pair has a 3,520-pound stated capacity and a recommended loading height under 14 inches.
A recommended loading height under 14 inches makes the LIEKUMM pair a focused choice for lower truck beds and trailer approaches. Each 47.4-inch aluminum ramp supports 1,760 pounds, for a stated 3,520-pound pair capacity, with a 13.4-inch width for motorcycles, ATVs, lawn mowers, and garden tractors.
The 47.4-inch ramp length and recommended height under 14 inches give buyers specific measurements for planning a loading approach; a higher step falls outside the stated recommendation. Each ramp is rated at 1,760 pounds, and the pair at 3,520 pounds, so users can compare the applicable load with their equipment. Aluminum construction keeps the material portable, while the 13.4-inch width defines the track available for listed vehicles.
- 3,520-pound pair capacity
- 1,760-pound capacity per ramp
- 47.4-inch length and 13.4-inch width
- Recommended for loading heights under 14 inches
- The stated recommended loading height is under 14 inches.
Skip it if you need to load above 14 inches; the VEVOR 72-inch ramps offer a longer ramp, though their fit must suit your setup.
These LIEKUMM ramps suit buyers loading motorcycles, ATVs, mowers, or garden tractors onto a lower truck or trailer. Keep the stated under-14-inch height recommendation and 3,520-pound pair limit central to your selection.
Full product details
| Brand | LIEKUMM |
|---|---|
| Color | Silver |
| Dimensions | 47.4"L x 13.4"W x 2.75"H |
| Item Weight | 20 pounds |
| Load Capacity | 3520 pounds |
| Manufacturer | LIEKUMM |
| Material | Aluminum |
| Model Number | HR802-4-PR |
Listed on Amazon as: LIEKUMM 4FT Aluminum Truck Ramps, 3520 Lbs Heavy-Duty
View on Amazon
#7
7. WheelX Aluminum Loading Ramps
- Dimensions: 45"L x 15"W x 11.31"H
- Weight: 40 lb
- Load Capacity: 1.9E+3 lb
- Material: Aluminum
Best for: Long approach for lighter equipment.
Why it ranks #7: The listing describes a pair with load straps and a 1,900-pound capacity, but its title and specifications conflict on ramp dimensions.
The 91-inch stated ramp length gives WheelX buyers a notably long approach for loading ATVs, UTVs, lawn mowers, tractors, or motorcycles onto pickups and trailers. Its 1,900-pound capacity pairs with a widened main beam and 3D convex surface, features intended to distribute load and smooth the uphill transition.
A 91-inch length can provide a longer approach than shorter ramps, while the 11.4-inch stated width offers a defined track to compare with the vehicle tires. The 3D convex surface is specified for smoother uphill transitions, and the main beam is widened by 30% for increased load distribution and stability. A strap anchor point adds a way to secure the ramp during loading; the stated capacity is 1,900 pounds.
- 91-inch stated length
- 1,900-pound stated capacity
- 3D convex surface for smoother uphill transitions
- Widened main beam and strap anchor point
- The stated 1,900-pound capacity is lower than heavy-duty ramp options.
Skip it if you need a stated capacity above 1,900 pounds; the VEVOR 72-inch pair is rated for 8,810 pounds.
These WheelX ramps fit buyers needing a long approach for listed recreational vehicles and equipment within the 1,900-pound capacity. Check the stated width and your loading setup, especially where trailer space limits ramp placement.
Full product details
| Brand | WheelX |
|---|---|
| Color | Silver |
| Dimensions | 45"L x 15"W x 11.31"H |
| Item Weight | 40 pounds |
| Load Capacity | 1.9E+3 pounds |
| Manufacturer | WheelX |
| Part Number | PDYD2-AMZ01 |
| Material | Aluminum |
| Model Number | 1900LBS |
Listed on Amazon as: Aluminum Loading Ramps, 1900Lbs Capacity, 7.5ft Trunk Ramps for Pickup Trucks, Trailers Ramp with Load Straps for ATV/UTV, Lawn mowers,Tractors, Motorcycles, 91" L x 11.4" W, 2Pcs
View on Amazon
#8
8. ALMULOO Aluminum Trailer Ramps
- Dimensions: 15.35"L x 5.51"W x 50"H
- Load Capacity: 6800 lb
- Material: Plastic
Best for: Wide aluminum vehicle compatibility.
Why it ranks #8: The title describes 60-by-15-inch trailer ramps rated for 6,800 pounds, but the specifications list plastic material and inconsistent dimensions.
A stated 6,800-pound capacity and 15-inch width make the ALMULOO ramps a broad-track option for buyers moving motorcycles, tractors, trucks, bicycles, cars, or lawn mowers. The listing describes aluminum construction as combining strength with portability, useful when ramps must be handled between loading locations.
The 15-inch stated width gives a broad track for the listed two- and four-wheel vehicle types, while the 6,800-pound capacity offers a clear figure for comparing the intended load. Aluminum is described as lightweight yet durable, supporting easier transport and handling. The product dimensions supplied are 15.35 by 5.51 by 50 inches, which do not align clearly with the title's 60-by-15-inch description, so verify the physical dimensions before planning a loading setup.
- 6,800-pound stated capacity
- 15-inch width in the title
- Listed for two- and four-wheel vehicles
- Aluminum construction described as portable
- The title and supplied product dimensions give conflicting ramp measurements.
Skip it if you need consistent listed dimensions before planning trailer clearance; the HECASA 60-by-15-inch ramps have matching title and specification dimensions.
This ALMULOO option suits buyers seeking a stated 6,800-pound capacity and broad vehicle compatibility. The supplied title and dimensions conflict, so resolve the ramp's actual length and width before matching it to a trailer.
Full product details
| Brand | ALMULOO |
|---|---|
| Color | Silver |
| Dimensions | 15.35"L x 5.51"W x 50"H |
| Load Capacity | 6800 pounds |
| Manufacturer | Ainuosen |
| Part Number | AI-357 |
| Material | Plastic |
| Model Number | AI-357 |
Listed on Amazon as: 60" x 15" Aluminum Trailer Ramps 6800 LBS Motorcycle ATV Loading
View on Amazon
#9
9. Arejonner Folding Loading Ramps
- Dimensions: 72.5"L x 8.7"W x 1.8"H
- Weight: 34.1 lb
- Load Capacity: 1500 lb
- Material: Alloy Steel
Best for: Folding steel ramp pair.
Why it ranks #9: The 72.5-inch steel pair includes four safety straps and gloves, but its 1,500-pound capacity is comparatively limited for heavier trailer loads.
A folding format makes the Arejonner pair easier to store between loading jobs, while its 72.5-inch length gives motorcycles, ATVs, lawn mowers, and other listed equipment a long approach. Dense perforations provide traction, and four safety straps are included to secure the ramps during use.
The 72.5-inch length and 8.7-inch width define a relatively narrow loading track, so compare the dimensions with the vehicle tires and loading edge. Dense perforations are specified to increase traction and prevent wheel slip and entrapment in different weather conditions. Four safety straps provide securing points, and the folding construction supports storage in a shed, garage, or other available space. The stated pair capacity is 1,500 pounds, and the ramps are alloy steel.
- Folding construction
- 72.5-inch length
- Dense perforated traction surface
- Four safety straps and protective gloves included
- The pair's stated capacity is 1,500 pounds.
Skip it if you need capacity above 1,500 pounds; the VEVOR 60-inch pair states a 6,000-pound capacity.
For owners storing ramps between jobs and loading listed vehicles into trailers, sheds, barns, or garages, this folding steel pair offers long tracks and straps. Its 1,500-pound capacity and 8.7-inch width set important limits.
Full product details
| Brand | Arejonner |
|---|---|
| Color | Silver |
| Dimensions | 72.5"L x 8.7"W x 1.8"H |
| Item Weight | 34.1 pounds |
| Load Capacity | 1500 Pounds |
| Manufacturer | Arejonner |
| Part Number | 03 |
| Material | Alloy Steel |
| Model Number | 03 |
Listed on Amazon as: 72.5" Heavy Duty Folding Loading Ramps, 1500lb Capacity, Ideal for Motorcycles, Lawn Mowers, ATVs, UTVs, and More – Pack of 2 with Safety Straps and Gloves
View on Amazon
#10
10. Stalwart 35.5-Inch Ramps
- Dimensions: 35.5"L x 8.5"W x 2"H
- Weight: 9 lb
- Load Capacity: 600 lb
- Material: Alloy Steel
Best for: Compact shed and trailer loading.
Why it ranks #10: These short steel ramps are intended mainly for sheds and low-profile loading; their stated 1,200-pound combined capacity limits trailer applications.
At 35.5 inches long, the Stalwart ramps offer a compact route into a shed, trailer, or van for lighter equipment. Each ramp carries a stated 600 pounds, and the pair's combined capacity is 1,200 pounds; use them separately for scooters or dirt bikes, or together for four-wheeled vehicles within that limit.
The two alloy-steel ramps can be used individually, each with a stated 600-pound capacity, or together for a combined 1,200-pound load. When bolted together, they create a 17-inch-wide angled track, although the connecting bolts are not included. Their 35.5-inch length suits buyers whose loading height and approach work with a short ramp, while the set is listed for ATVs, motorcycles, mowers, carts, and similar equipment.
- Compact 35.5-inch length
- 600-pound capacity per ramp
- 1,200-pound combined capacity
- Can be bolted together for a 17-inch track
- Bolts for joining the ramps are not included.
Skip it if you need a longer approach for a high trailer bed; the LIEKUMM 47.4-inch ramps provide more length, subject to their recommended height.
This Stalwart set suits owners moving scooters, motorcycles, ATVs, or mowers into a shed, trailer, or van. Its short 35.5-inch length and 1,200-pound combined limit make loading height and total vehicle weight key considerations.
Full product details
| Brand | Stalwart |
|---|---|
| Color | Silver |
| Included Components | Steel Ramp Set |
| Dimensions | 35.5"L x 8.5"W x 2"H |
| Item Weight | 9 pounds |
| Load Capacity | 600 pound |
| Manufacturer | TRAUV |
| Part Number | 75-CAR1066 |
| Manufacturer Warranty Description | N/a. |
| Material | Alloy Steel |
| Model Number | 75-CAR1066 |
Listed on Amazon as: Loading Ramps – Set of Two 35.5-Inch Ramps for ATVs, Motorcycles, Mowers, Carts, and More – 1200lb Combined Capacity Shed Ramp Set by Stalwart
View on AmazonAvoid ramp-slip and capacity mistakes
A ramp that shifts or is overloaded can turn an ordinary loading task into a loss-of-control hazard, so confirm attachment and capacity before use. Several listed models mention features intended to improve security: the 60-inch VEVOR pair has full-width hook ends and adjustable straps, while the Silscvtt pair describes an extension plate and straps. These features do not replace checking that the ramp rests securely on your specific trailer.
Capacity labels also need careful interpretation. The Stalwart listing states 600 pounds per ramp and 1,200 pounds combined, while other listings state a capacity without making the same distinction clear.
The labwork title says 6,500 pounds, but its specifications say 3,000 pounds. Do not resolve discrepancies by guessing; confirm the applicable rating and whether it is per ramp or per pair, then account for the loaded vehicle and equipment.
Match ramp length to the trailer approach
The right ramp length depends on the height you must reach and the approach you can safely make; the listed length alone cannot confirm a fit. These products span short 35.5-inch Stalwart ramps, 47.4-inch LIEKUMM ramps, 60-inch pairs, and longer 72- to 84-inch options. Longer ramps can make a given rise less steep, but they also need more room and may be heavier or harder to position.
The LIEKUMM listing specifically recommends a loading height under 14 inches, a useful reminder to measure your trailer before choosing. The HECASA listing’s dimensions are stated as 60 inches long and 15 inches wide in its specifications, although its feature text gives a conflicting length unit.
Check the actual product dimensions, deck height, ramp contact points, and available ground clearance instead of relying on a product title alone.
How to Choose Trailer Loading Ramps
Capacity and rating basis
Look for a stated capacity that safely covers the vehicle and equipment you intend to load, and determine whether the figure applies per ramp or to the pair. The products list capacities from 1,200 pounds combined for Stalwart to 8,810 pounds for the 72-inch VEVOR pair; other options include 6,000-pound VEVOR and Silscvtt pairs and a 3,520-pound LIEKUMM pair. Listings do not always explain the rating basis consistently.
The labwork title says 6,500 pounds while its specifications state 3,000 pounds, so that figure needs confirmation. Buyers moving heavy tractors or equipment should prioritize a confirmed high rating; lighter motorcycles or mowers may have more options, but should still verify the load and manufacturer guidance.
Length, width, and loading height
Choose ramp dimensions to suit the trailer’s deck height, approach, and the vehicle’s wheel or track width. Listed lengths range from 35.5 inches for Stalwart to 84 inches for labwork, while several aluminum pairs measure 60 inches and the LIEKUMM option is 47.4 inches. Widths range from 8.5 inches on Stalwart to 15 inches on HECASA and the 72-inch VEVOR pair.
LIEKUMM recommends a loading height under 14 inches, but other listings do not provide a comparable height limit. A compact ramp may suit low sheds or short approaches; buyers facing a higher deck may prefer a longer ramp, provided there is room to position it and the manufacturer approves the setup.
Material and attachment features
Compare ramp material and the method used to keep the ramp seated on the trailer. Most products here list aluminum, including VEVOR, HECASA, Silscvtt, and LIEKUMM; Arejonner and Stalwart list alloy steel. Aluminum is the common option in the longer, higher-capacity choices, while the 72.5-inch Arejonner pair adds a perforated surface, four safety straps, and gloves.
Hook ends appear on the VEVOR 60-inch and labwork ramps; the VEVOR 60-inch pair also includes adjustable safety straps. Buyers who need a specific deck connection should check that the ramp end matches their trailer, rather than assuming all hooks fit.
Resolve material or dimension conflicts in a listing before ordering, especially for ALMULOO.
Which Trailer Loading Ramps Should You Choose?
For a versatile trailer-loading pair with a clear combination of stated capacity and attachment features, choose the VEVOR 60-Inch Aluminum Ramps. If you need a longer ramp and the highest listed capacity, consider the VEVOR 72-Inch Aluminum Ramps, but confirm the rating and fit first. Choose HECASA 60-Inch Trailer Ramps if a 15-inch width and a trailer-focused listing matter most.
The Silscvtt 60-Inch Aluminum Ramps offer a similar 6,000-pound stated capacity with straps and an extension plate. For a low loading height, the LIEKUMM 4-Foot Aluminum Ramps specify a recommended height under 14 inches.
Avoid choosing by title alone: the labwork, WheelX, and ALMULOO listings contain conflicting specifications, so verify their details before relying on them.
Related Buying Guides
- Best Loading Ramps For Motorcycles
- Best Loading Ramps For Atv
- Best Loading Ramps For Pickup Trucks
- Best Loading Ramps For Box Trucks
- Best Ramps For A Trailer
- Best Motorcycle Loading Ramps For Vans
Frequently Asked Questions
How do I calculate the ramp length needed for my trailer height?
Measure the vertical distance from the ground to the trailer’s loading point, then compare it with the ramp’s length and the manufacturer’s recommended loading height. A longer ramp generally creates a gentler incline for the same height. Check the product guidance and your loading setup before choosing or using a ramp.
How can I confirm a ramp’s stated capacity applies to my vehicle and loading setup?
Check the stated capacity against your vehicle’s weight and the manufacturer’s instructions for how capacity is measured, including whether the rating is for a pair or an individual ramp. Consider the load distribution and setup as well. If the listing’s specifications conflict or leave these details unclear, verify them with the seller or manufacturer before use.
What precautions help keep trailer ramps from slipping or shifting during loading?
Use the ramp’s intended attachment points, such as hook ends or safety straps, and make sure they are securely engaged with the trailer. Position the ramps on stable, level ground and confirm they remain aligned before loading. Follow the product instructions, and stop if a ramp moves or its attachment does not fit securely.
How should I choose ramp width for my vehicle or equipment?
Compare the ramp’s stated width with the tires or tracks and the loading path, allowing for accurate alignment as the vehicle moves. The listings here include widths of 11.4, 12, 14, and 15 inches, but width alone does not confirm fit. Check the product dimensions and your equipment before deciding.
What should I do when a ramp listing has conflicting specifications?
Do not rely on the title alone when dimensions or capacity appear inconsistent. Check the complete product details and confirm the applicable rating, ramp size, and intended setup with the seller or manufacturer before use. This is especially important for the labwork, WheelX, and ALMULOO listings identified in the article as having conflicting specifications.
Final Words
For a versatile trailer-loading pair, the VEVOR 60-inch aluminum ramps combine a stated 6,000-pound capacity with full-width hook ends and adjustable safety straps. Consider the 72-inch VEVOR pair if you need more length or a higher listed capacity, but verify fit and rating first. Match ramp dimensions to your trailer and vehicle, secure each ramp as directed, and confirm any unclear or conflicting listing details before loading.


