A strong trailer ramp should match your trailer height, vehicle weight, and loading surface; for heavier equipment, the VEVOR Aluminum 96-Inch ramps offer a 10,000-pound pair capacity and a 15-inch width. This selection includes long aluminum ramps for trailers and truck beds, shorter pairs for ATVs and mowers, folding steel ramps, and one tandem-tire service ramp. The products differ substantially in length, material, capacity, and attachment design, so the largest capacity is not automatically the best fit.
Check each ramp’s stated load limit and whether it is specified per ramp or per pair, then confirm that its length and end design suit your trailer. The comparisons below highlight the documented specifications and intended uses without assuming compatibility with a particular trailer.
The VEVOR Aluminum 96-Inch ramps lead for buyers seeking a substantial trailer-loading pair: they measure 96.1 by 15 inches and are rated for 10,000 pounds combined, with a stated 5,000-pound capacity per ramp. Their length and width suit buyers who need a larger loading surface for vehicles or equipment. If you need a shorter pair, the HECASA 60-Inch ramps offer a 6,800-pound stated capacity and hook ends; check your trailer’s dimensions and the intended load before choosing either set.
Our Top Picks
Best OverallThe 96.1-by-15-inch aluminum pair has a stated 10,000-pound combined capacity, the highest among these vehicle-loading trailer ramp pairs.
View on Amazon
Best Hook-End PairThese 60-by-15-inch aluminum ramps have hook ends and a stated 6,800-pound capacity, suiting buyers who need a shorter pair.
View on Amazon
Best Strap SecurityThe 60-by-12-inch pair supports 6,000 pounds and includes full-width hook ends, an extension plate, and adjustable safety straps.
View on Amazon- Long Aluminum Option labwork Aluminum 84-Inch
Compare ramp types, sizes, and stated capacities
| # | Product | Dimensions | Weight | Load Capacity | Material | Buy |
|---|---|---|---|---|---|---|
| 1 | 1. VEVOR Aluminum 96-InchBest Overall | 96.1"L x 15"W x 3.5"H | 96.3 lb | 10000 lb | Aluminum Alloy (Grade: 6061-T6) | View on Amazon |
| 2 | 2. HECASA 60-InchBest Hook-End Pair | 60"L x 15"W x 2.25"H | 55.1 lb | 6800 lb | Aluminum | View on Amazon |
| 3 | 3. VEVOR Aluminum 60-InchBest Strap Security | 60"L x 12"W x 2.36"H | 30 lb | 6000 lb | Aluminum | View on Amazon |
| 4 | 4. Silscvtt Aluminum 60-InchStrapped 60-inch aluminum ramps | 60"L x 12"W x 2"H | — | 6000 lb | Aluminum | View on Amazon |
| 5 | 5. labwork Aluminum 84-InchLong Aluminum Option | 84"L x 14"W x 2.5"H | 30300 g | 3000 lb | Aluminum | View on Amazon |
| 6 | 6. Ruedamann Aluminum 4-FootPortable ramp pair for shorter approaches | 48.2"L x 13.4"W x 2.8"H | 19.4 lb | 4400 lb/pair | Aluminum | View on Amazon |
| 7 | 7. Arejonner Folding SteelTraction-focused folding pair | 72.5"L x 8.7"W x 1.8"H | 34.1 lb | 1500 lb | Alloy Steel | View on Amazon |
| 8 | 8. Stalwart Steel 35.5-InchShort shed and trailer approaches | 35.5"L x 8.5"W x 2"H | 9 lb | 600 lb | Alloy Steel | View on Amazon |
| 9 | 9. TARNANVEL Steel 47.2-InchLightweight steel shed loading | 47.2"L x 8.9"W x 1.7"H | 9.9 lb | 880 lb | Alloy Steel | View on Amazon |
| 10 | 10. MAXXHAUL Tandem RampTandem trailer tire maintenance | 24"L x 8.5"W x 7.1"H | 7 lb | 20000 lb | Plastic | View on Amazon |
Detailed Reviews: Best Ramps For A Trailer

#1 · Best Overall
1. VEVOR Aluminum 96-Inch
- Dimensions: 96.1"L x 15"W x 3.5"H
- Weight: 96.3 lb
- Load Capacity: 10000 lb
- Material: Aluminum Alloy (Grade: 6061-T6)
Best for: Long ramps for heavy equipment.
Why it ranks #1: The 96.1-by-15-inch aluminum pair has a stated 10,000-pound combined capacity, the highest among these vehicle-loading trailer ramp pairs.
A 96.1-inch length paired with a 10,000-pound capacity makes this VEVOR aluminum set suited to buyers moving heavy vehicles or equipment onto a trailer. Each ramp is rated for 5,000 pounds, and tightly spaced anti-slip grooves are described as improving traction while helping prevent water buildup.
The 96.1-by-15-inch dimensions provide a long, broad track for loading pickup trucks, cars, tractors, ATVs, and other listed equipment. Aluminum alloy construction keeps the material distinct from steel options, while the 6061-T6 specification identifies the alloy grade. Tightly spaced grooves support grip in wet conditions and help water drain from the surface. At 96.3 pounds for the pair, these ramps require a plan for moving and storing them.
- 10,000-pound capacity per pair
- 96.1-inch length and 15-inch width
- Anti-slip grooves help manage wet-surface traction
- Aluminum alloy, grade 6061-T6
- The pair weighs 96.3 pounds.
Skip it if you need ramps that are easier to carry; Ruedamann HR802-4-PR lists a 19.4-pound pair weight.
This VEVOR pair suits buyers loading heavy vehicles or equipment who can accommodate its 96.1-inch length and 96.3-pound weight. Keep each ramp within its 5,000-pound rating and the pair within 10,000 pounds.
Full product details
| Brand | VEVOR |
|---|---|
| Color | White |
| Dimensions | 96.1"L x 15"W x 3.5"H |
| Item Weight | 96.3 pounds |
| Load Capacity | 10000 Pounds |
| Manufacturer | VEVOR |
| Part Number | NY6077 |
| Material | Aluminum Alloy (Grade: 6061-T6) |
| Model Number | NY6077 |

#2 · Best Hook-End Pair
2. HECASA 60-Inch
- Dimensions: 60"L x 15"W x 2.25"H
- Weight: 55.1 lb
- Load Capacity: 6800 lb
- Material: Aluminum
Best for: Wider aluminum vehicle ramps.
Why it ranks #2: These 60-by-15-inch aluminum ramps have hook ends and a stated 6,800-pound capacity, suiting buyers who need a shorter pair.
A 15-inch-wide track distinguishes HECASA's 60-inch aluminum ramps, giving motorcycles and broader four-wheeled equipment more ramp width than a 12-inch track. The pair carries a listed 6,800-pound capacity and is described for motorcycles, bicycles, off-road vehicles, and lawn mowers, making it a versatile choice for trailer loading.
High-strength aluminum is described as lighter and resistant to rust or deformation, supporting outdoor use while easing handling compared with heavier ramp materials. At 60 inches long and 15 inches wide, the pair offers a relatively broad loading surface for two- and four-wheeled equipment. Its 6,800-pound listed capacity provides a clear upper limit for planning loads; the product information identifies a pair with hook-end and knife-foot styling.
- 15-inch width
- 6,800-pound listed capacity
- Aluminum construction described as resistant to rust and deformation
- Listed for motorcycles, bicycles, off-road vehicles, and lawn mowers
- The pair is listed at 55.1 pounds, which makes handling a substantial consideration.
Skip it if you want lighter ramps to carry between jobs; Ruedamann HR802-4-PR lists a 19.4-pound pair weight.
This pair suits buyers who prioritize a wider aluminum track for varied trailer-loading jobs and can manage its listed 55.1-pound weight. Keep loads within the stated 6,800-pound capacity and consider the 60-inch length for your loading setup.
Full product details
| Brand | HECASA |
|---|---|
| Color | Silver |
| Dimensions | 60"L x 15"W x 2.25"H |
| Item Weight | 55.1 pounds |
| Load Capacity | 6800 pound |
| Part Number | NN1771 |
| Material | Aluminum |
| Model Number | NN1771 |
Listed on Amazon as: HECASA 60''X 15''Trailer Ramp Universal 6800 LBS Truck Bike Motorcycle Loading Ramps Hook End Knife Foot Pair (NN1771)
View on Amazon
#3 · Best Strap Security
3. VEVOR Aluminum 60-Inch
- Dimensions: 60"L x 12"W x 2.36"H
- Weight: 30 lb
- Load Capacity: 6000 lb
- Material: Aluminum
Best for: High-capacity truck-bed loading.
Why it ranks #3: The 60-by-12-inch pair supports 6,000 pounds and includes full-width hook ends, an extension plate, and adjustable safety straps.
A 6,000-pound pair rating in aluminum ramps weighing 26 pounds makes the VEVOR set a practical option for moving substantial equipment without handling steel ramps. Each 60-by-12-inch ramp has a full-width hook end, giving the pair a broad attachment point for loading two- or four-wheeled vehicles onto a truck bed or trailer.
The 60-inch length and 12-inch width provide a defined track for tractors, ATVs, UTVs, motorcycles, or bicycles, while the 6,000-pound combined capacity supports heavier loading jobs within that limit. Rungs add surface friction, and the extension plate and adjustable safety straps help keep the ramps in position during use. Aluminum construction keeps the listed ramp weight at 26 pounds, making transport and setup less cumbersome than heavier materials.
- 6,000-pound stated load capacity
- Aluminum construction; listed ramp weight is 26 pounds
- Full-width hook attaching end
- Rungs, extension plate, and adjustable safety straps
- At 12 inches wide, each ramp offers a narrower track than 15-inch options.
Skip it if you need a 15-inch-wide track; HECASA's 60-by-15-inch ramps offer more width.
Choose this pair for loading substantial equipment into a truck bed or trailer when its 60-inch length and 12-inch width suit the approach. Its listed capacity is 6,000 pounds, so keep the load within that limit.
Full product details
| Brand | VEVOR |
|---|---|
| Color | Silver |
| Included Components | 2 x Aluminum Ramps |
| Dimensions | 60"L x 12"W x 2.36"H |
| Item Weight | 30 pounds |
| Load Capacity | 6000 Pounds |
| Manufacturer | VEVOR |
| Part Number | 6000 lbs Aluminum Ramps |
| Manufacturer Warranty Description | None. |
| Material | Aluminum |
| Model Number | Heavy-Duty Ramps |
Listed on Amazon as: VEVOR Aluminum Ramps, 60" L x 12" W, 2Pcs
View on Amazon
#4
4. Silscvtt Aluminum 60-Inch
- Dimensions: 60"L x 12"W x 2"H
- Load Capacity: 6000 lb
- Material: Aluminum
Best for: Strapped 60-inch aluminum ramps.
Why it ranks #4: This 60-by-12-inch aluminum pair is rated for 6,000 pounds and features rungs, an extension plate, and adjustable safety straps.
Adjustable safety straps and an extension plate distinguish Silscvtt's 60-inch aluminum ramps, helping secure their position as vehicles move onto a trailer. The two ramps are rated for 6,000 pounds and use a rung design to increase friction, making them a practical option for buyers seeking additional positioning features during loading.
At 60 inches long and 12 inches wide, the ramps provide a familiar track size for loading vehicles onto a trailer. Their rung pattern increases friction, while the extension plate and adjustable safety straps help keep the ramps firmly in place. The manufacturer also describes welded construction and a stair-step design for distributing weight. Together, these features support a more controlled loading workflow, within the stated 6,000-pound capacity.
- 6,000-pound listed capacity
- Adjustable safety straps
- Extension plate helps secure ramp placement
- Welded construction with a stair-step design
- The 12-inch width provides less track width than 15-inch ramps.
Skip it if you need a wider track; HECASA's 60-by-15-inch ramps provide a 15-inch width.
These ramps suit buyers who want straps and an extension plate for loading vehicles onto a trailer. Their 60-inch length, 12-inch width, and 6,000-pound capacity define the fit; check that those dimensions suit your approach and load.
Full product details
| Brand | Silscvtt |
|---|---|
| Color | Silver |
| Dimensions | 60"L x 12"W x 2"H |
| Load Capacity | 6000 pound |
| Manufacturer | Silscvtt |
| Part Number | TR-2579435-582589-SS |
| Material | Aluminum |
| Model Number | Does not Apply |
Listed on Amazon as: Silscvtt 2 Pcs 60 Inch x 12 Inch Aluminum Trailer Ramps
View on Amazon
#5 · Long Aluminum Option
5. labwork Aluminum 84-Inch
- Dimensions: 84"L x 14"W x 2.5"H
- Weight: 30300 g
- Load Capacity: 3000 lb
- Material: Aluminum
Best for: Long aluminum truck-bed ramps.
Why it ranks #5: The 84-by-14-inch aluminum ramps offer a longer loading run and a stated 6,500-pound capacity, with hook attachment ends.
An 84-inch aluminum track gives labwork ramps a longer approach for loading motorcycles, dirt bikes, lawn mowers, or ATVs onto a truck or trailer. The product lists a 6,500-pound pair capacity, and its hook attachment end fits into a truck slot or rests on a car-hauler trailer deck.
The 84-by-14-inch dimensions provide more length and width than a compact shed ramp, helping create a defined path for the listed vehicles. Aluminum construction is lighter than steel according to the product description, while the hook end provides an attachment point at a truck slot or trailer deck. The listed specifications state a 3,000-pound capacity, while the title gives 6,500 pounds; buyers should resolve that discrepancy before loading.
- 84-inch length
- 14-inch width
- Aluminum construction described as lighter than steel
- Hook attachment end for truck slots or trailer decks
- Capacity information conflicts: title says 6,500 pounds; specifications say 3,000 pounds.
Skip it if you need a confirmed capacity before choosing; VEVOR NY6077 lists a 10,000-pound pair capacity.
Consider this pair for truck or trailer loading where its long aluminum track and hook end suit the setup. The title and specification capacity figures conflict, so that discrepancy is a decisive boundary for load planning.
Full product details
| Brand | labwork |
|---|---|
| Color | Silver |
| Dimensions | 84"L x 14"W x 2.5"H |
| Item Weight | 30300 g |
| Load Capacity | 3000 pounds |
| Manufacturer | labwork |
| Part Number | 1-6278005-219514 |
| Manufacturer Warranty Description | Does not apply. |
| Material | Aluminum |
| Model Number | Does not apply |
Listed on Amazon as: labwork 1 Pair 84 Inch x 14 inch Aluminum Ramps 6500LBS
View on Amazon
#6
6. Ruedamann Aluminum 4-Foot
- Dimensions: 48.2"L x 13.4"W x 2.8"H
- Weight: 19.4 lb
- Load Capacity: 4400 lb/pair
- Material: Aluminum
Best for: Portable ramp pair for shorter approaches.
Why it ranks #6: Each 48.2-by-13.4-inch ramp has a handle and side protection; the pair’s stated capacity is 4,400 pounds.
A webbing carry handle on each 48.2-inch Ruedamann ramp makes carrying and moving this 19.4-pound pair easier between loading spots. The aluminum ramps have a combined 4,400-pound capacity and are specified for use below a 13.8-inch loading height, making them a portable option for suitable truck, trailer, or shed approaches.
The 48.2-by-13.4-inch dimensions create a shorter, moderately wide track for ATVs, UTVs, motorcycles, lawn mowers, and golf carts. A webbing handle supports carrying and storage, while the anti-slip surface helps scrape mud from wheels during loading. Side protection is intended to help prevent equipment from falling off the ramp. The stated 4,400-pound capacity applies to the pair, and the recommended use height is under 13.8 inches.
- 19.4-pound pair weight
- Webbing handles for carrying
- Side protection helps prevent equipment from falling
- Anti-slip surface can scrape mud from wheels
- Recommended for loading heights under 13.8 inches.
Skip it if you need a longer ramp for a higher approach; the listed recommended height is under 13.8 inches.
Pick the Ruedamann pair for portable loading of compatible equipment at a height below 13.8 inches. Its handles and side protection suit frequent moving, while the 4,400-pound pair capacity and 48.2-inch length set important operating boundaries.
Full product details
| Brand | Ruedamann |
|---|---|
| Color | Silver |
| Dimensions | 48.2"L x 13.4"W x 2.8"H |
| Item Weight | 19.4 pounds |
| Load Capacity | 4400 Pounds/pair |
| Manufacturer | Ruedamann |
| Material | Aluminum |
| Model Number | HR802-4-PR |
Listed on Amazon as: Ruedamann 4Ft Truck Ramps, 2 Pcs 4400 Lbs Total Capacity, Aluminum Trailer Ramp, Heavy-Duty ATV Ramps for Pickup Trucks, UTVs, Motorcycles, Lawn Mowers, Golf Carts
View on Amazon
#7
7. Arejonner Folding Steel
- Dimensions: 72.5"L x 8.7"W x 1.8"H
- Weight: 34.1 lb
- Load Capacity: 1500 lb
- Material: Alloy Steel
Best for: Traction-focused folding pair.
Why it ranks #7: The 72.5-inch alloy-steel pair has a perforated surface, four safety straps, and a 1,500-pound stated capacity.
A dense perforated surface gives Arejonner's 72.5-inch ramps traction-focused coverage for loading motorcycles, ATVs, lawn mowers, and other equipment into trailers or storage spaces. Four safety straps help secure the pair, while the folding format supports storage between jobs. Their listed 1,500-pound capacity makes load planning essential.
The 72.5-inch length provides an extended loading path, and the 8.7-inch width defines a comparatively narrow track for equipment wheels. Dense perforations are described as improving traction and helping prevent wheel slippage and entrapment in varied weather. Four safety straps help hold the ramps in place; gloves are included for installation. Alloy-steel construction and the folding format make storage and handling considerations part of the decision, alongside the 1,500-pound capacity.
- 72.5-inch ramp length
- Dense perforated surface for traction
- Four safety straps included
- Folding format for storage
- The listed capacity is 1,500 pounds for the pair.
Skip it if you need capacity above 1,500 pounds; this pair's stated limit is 1,500 pounds.
Choose Arejonner for equipment within its 1,500-pound capacity when a long, perforated track and folding storage suit your trailer or garage workflow. Its 8.7-inch width is an important fit consideration for the tires being loaded.
Full product details
| Brand | Arejonner |
|---|---|
| Color | Silver |
| Dimensions | 72.5"L x 8.7"W x 1.8"H |
| Item Weight | 34.1 pounds |
| Load Capacity | 1500 Pounds |
| Manufacturer | Arejonner |
| Part Number | 03 |
| Material | Alloy Steel |
| Model Number | 03 |
Listed on Amazon as: 72.5" Heavy Duty Folding Loading Ramps, 1500lb Capacity, Ideal for Motorcycles, Lawn Mowers, ATVs, UTVs, and More – Pack of 2 with Safety Straps and Gloves
View on Amazon
#8
8. Stalwart Steel 35.5-Inch
- Dimensions: 35.5"L x 8.5"W x 2"H
- Weight: 9 lb
- Load Capacity: 600 lb
- Material: Alloy Steel
Best for: Short shed and trailer approaches.
Why it ranks #8: This compact 35.5-inch steel set has a 1,200-pound combined capacity and ramps that can bolt together for a wider track.
Each 35.5-inch Stalwart ramp can be used separately for scooters and dirt bikes, or joined with bolts to create a 17-inch-wide angled track. That flexible setup suits shed and trailer loading where a short approach is useful, with a combined 1,200-pound capacity for four-wheeled equipment.
The pair's 600-pound-per-ramp rating allows individual use for lighter two-wheeled vehicles; together, the ramps support loads up to 1,200 pounds. Their 35.5-inch length and 8.5-inch width suit low-profile loading tasks such as moving an ATV, motorcycle, mower, or cart into a shed or trailer. Bolting the ramps together creates a 17-inch-wide track, but the required bolts are not included, so joining them requires separate hardware.
- Can be used separately or joined
- 17-inch-wide track when bolted together
- 600-pound capacity per ramp; 1,200-pound combined capacity
- Suitable for trailers, sheds, and vans
- Bolts for joining the ramps are not included.
Skip it if you need a longer approach; Ruedamann HR802-4-PR measures 48.2 inches per ramp.
This set fits buyers loading lighter equipment into a shed, van, or trailer who value separate or joined ramp use. Its 35.5-inch length and 1,200-pound combined limit make approach height and load weight key considerations.
Full product details
| Brand | Stalwart |
|---|---|
| Color | Silver |
| Included Components | Steel Ramp Set |
| Dimensions | 35.5"L x 8.5"W x 2"H |
| Item Weight | 9 pounds |
| Load Capacity | 600 pound |
| Manufacturer | TRAUV |
| Part Number | 75-CAR1066 |
| Manufacturer Warranty Description | N/a. |
| Material | Alloy Steel |
| Model Number | 75-CAR1066 |
Listed on Amazon as: Loading Ramps – Set of Two 35.5-Inch Ramps for ATVs, Motorcycles, Mowers, Carts, and More – 1200lb Combined Capacity Shed Ramp Set by Stalwart
View on Amazon
#9
9. TARNANVEL Steel 47.2-Inch
- Dimensions: 47.2"L x 8.9"W x 1.7"H
- Weight: 9.9 lb
- Load Capacity: 880 lb
- Material: Alloy Steel
Best for: Lightweight steel shed loading.
Why it ranks #9: The 47.2-inch steel pair is rated for 880 pounds combined and is described for use below 13 inches, limiting its load range.
At 9.9 pounds for the pair, TARNANVEL's 47.2-inch steel ramps are easy to carry between suitable trailer or shed loading locations. Each supports up to 440 pounds, or 880 pounds as a pair, and the product specifies use at heights below 13 inches for ATVs, motorcycles, and lawn mowers.
The 47.2-by-8.9-inch dimensions create a narrow track for loading equipment, while the listed height guidance sets a clear boundary: use is intended below 13 inches. The ramps can be used individually for scooters and off-road bicycles or together for four-wheeled vehicles, within their 880-pound combined capacity. The package also lists two 2-meter hook ropes and a glove, giving buyers additional components to account for during setup and handling.
- 9.9-pound listed pair weight
- Can be used individually or as a pair
- Two 2-meter hook ropes included
- 880-pound combined capacity
- The 8.9-inch width provides a narrow track.
Skip it if you need a wider loading surface; HECASA's 60-by-15-inch aluminum ramps provide more track width.
Choose these ramps for portable loading of lighter equipment onto a trailer or shed below 13 inches in height. Their 8.9-inch width and 880-pound pair capacity are important limits when assessing your tires and load.
Full product details
| Brand | TARNANVEL |
|---|---|
| Color | Silver Color |
| Dimensions | 47.2"L x 8.9"W x 1.7"H |
| Item Weight | 9.9 pounds |
| Load Capacity | 880 Pounds |
| Manufacturer | TARNANVEL |
| Material | Alloy Steel |
| Model Number | As005-Loadramp |
Listed on Amazon as: 2 PCS Trailer Ramps, 47.2" L x8.9 Shed Ramp 880lb Capacity Portable Lightweight Waterproof Sturdy Anti-Slip Loading Ramps for Motorcycle Lawn Mowers ATVs
View on Amazon
#10
10. MAXXHAUL Tandem Ramp
- Dimensions: 24"L x 8.5"W x 7.1"H
- Weight: 7 lb
- Load Capacity: 20000 lb
- Material: Plastic
Best for: Tandem trailer tire maintenance.
Why it ranks #10: This plastic ramp is designed to raise tandem-wheel vehicles 5.5 inches for maintenance, not to load vehicles onto a trailer.
A 5.5-inch lift without a jack makes the MAXXHAUL 50979 a different kind of trailer ramp: drive a tire onto it for maintenance access. Its concave tire cradle helps hold the tire in position, while the textured surface and gentle incline support traction during this specific service task.
The 24-by-8.5-inch ramp raises a tire 5.5 inches, making it relevant to tire replacement and vehicle maintenance rather than loading equipment into a trailer. The concave top provides a positioning cue as the tire settles into place, and the textured surface is described as improving traction. The product information gives a 16,000-pound capacity in its feature text and 20,000 pounds in specifications, so confirm the applicable limit before use.
- Raises tires 5.5 inches
- No jack needed for the stated lift
- Concave tire cradle helps hold the tire in position
- Textured surface and gentle incline support traction
- Capacity figures conflict: feature text says 16,000 pounds; specifications say 20,000 pounds.
Skip it if you need a pair of ramps for loading equipment; VEVOR NY6077 is a 96.1-inch two-ramp set.
Choose the MAXXHAUL for tandem-trailer tire access or vehicle maintenance when a 5.5-inch drive-on lift suits the job. It is a service ramp, not a conventional loading pair, and its capacity figures conflict.
Full product details
| Brand | MAXXHAUL |
|---|---|
| Color | Black |
| Dimensions | 24"L x 8.5"W x 7.1"H |
| Item Weight | 7 pounds |
| Load Capacity | 20000 pounds |
| Manufacturer | MaxxHaul Towing Products |
| Part Number | 50979 |
| Material | Plastic |
| Model Number | 50979 |
Listed on Amazon as: MaxxHaul Tandem Trailer Ramp 16000 lb 5.5 Inch Lift RV Camper – (50979)
View on AmazonAvoid the ramp-length and trailer-fit trap
Ramp length alone cannot confirm that a pair will fit your trailer or create a suitable loading angle. These options span from the Stalwart Steel 35.5-Inch to the VEVOR Aluminum 96-Inch, but the supplied specifications do not state a universally compatible trailer height or approach angle. Measure the height from the ground to the loading surface, check the available deck width, and compare those measurements with the ramp dimensions before buying.
Also check the end design: the VEVOR Aluminum 60-Inch and labwork Aluminum 84-Inch specify hook attachment ends, while other products describe straps, an extension plate, or no attachment details in the supplied specifications. An end that does not seat securely can shift during loading, so do not assume that a similar length means a compatible fit.
If the trailer has an unusual edge or loading point, confirm the ramp maker’s fit guidance for that setup.
Treat the capacity number as a limit, not a fit guarantee
A high stated capacity does not by itself establish that a ramp is appropriate for every vehicle or loading setup. The VEVOR Aluminum 96-Inch lists 10,000 pounds combined and 5,000 pounds per ramp, while the Stalwart Steel 35.5-Inch specifies 600 pounds per ramp and 1,200 pounds combined. Those figures are not interchangeable: compare the load against the per-ramp limit when using a single ramp, and account for how the load is distributed across the pair.
The product data does not specify every vehicle’s axle distribution or confirm safe use on every trailer surface. A mismatch can overload one ramp even when the pair’s total rating appears sufficient.
Check the vehicle’s loaded weight, the product’s stated capacity basis, and the manufacturer’s instructions before loading; do not infer a safe margin or suitability from capacity alone.
How to Choose Trailer Loading Ramps
Ramp length and width
Look for ramps long and wide enough for your trailer setup and the vehicle being loaded. The listed products range from the 35.5-by-8.5-inch Stalwart Steel 35.5-Inch to the 96.1-by-15-inch VEVOR Aluminum 96-Inch. Other options include 60-inch pairs 12 or 15 inches wide and an 84-by-14-inch labwork Aluminum 84-Inch.
Greater length may suit a buyer whose setup needs a longer ramp run, while a shorter pair may suit a low loading point or limited storage space. Width also differs, so compare the ramp surface with the vehicle’s tires and your loading path.
Measure your trailer and check the manufacturer’s fit guidance rather than choosing by length alone.
Capacity and rating basis
Choose a pair whose stated load capacity covers the intended load, and note whether the figure is for one ramp or the pair. Stalwart Steel 35.5-Inch lists 600 pounds per ramp and 1,200 pounds combined; Ruedamann Aluminum 4-Foot lists 4,400 pounds per pair. At the higher end, VEVOR Aluminum 96-Inch lists 10,000 pounds per pair and 5,000 per single ramp.
This range makes the smaller-rated steel sets more relevant to lighter equipment, while higher-capacity aluminum options suit buyers whose required rating is greater. Confirm the loaded vehicle weight and how it is distributed; the pair total should not be treated as permission to exceed a single ramp’s rating.
Material and loading features
Compare material and the features that secure or help handle the ramps. Aluminum options include VEVOR Aluminum 60-Inch, HECASA 60-Inch, and Ruedamann Aluminum 4-Foot; alloy-steel choices include Arejonner Folding Steel and Stalwart Steel 35.5-Inch. Documented features vary: the VEVOR Aluminum 60-Inch has hook ends and adjustable safety straps, while labwork Aluminum 84-Inch has a hook attachment end.
Ruedamann Aluminum 4-Foot adds a carrying handle and side protection, and Arejonner Folding Steel includes four safety straps. Buyers prioritizing specified attachment features can compare the hook-end or strap-equipped choices; those who value carrying or storage details should check the handle and folding descriptions.
Which Trailer Ramps Should You Choose?
For a high-capacity, wide pair, choose VEVOR Aluminum 96-Inch: it measures 96.1 by 15 inches and lists 10,000 pounds combined capacity. If you need a 60-inch aluminum pair with hook ends, HECASA 60-Inch lists 6,800 pounds; for adjustable safety straps and a 6,000-pound rating, consider VEVOR Aluminum 60-Inch. Choose labwork Aluminum 84-Inch when you want an 84-inch aluminum ramp with hook attachment ends, or Ruedamann Aluminum 4-Foot for a shorter pair with handles and side protection.
Arejonner Folding Steel and Stalwart Steel 35.5-Inch are lower-capacity steel alternatives. MAXXHAUL Tandem Ramp is for raising tandem-wheel vehicles during maintenance, not loading onto a trailer.
Before purchase, verify trailer fit, load rating, and attachment compatibility.
Related Buying Guides
- Best Motorcycle Ramp For Trailer
- Best Ramp Gate For Trailer
- Best Hinges For Trailer Ramp
- Best Heavy Duty Ramps For Trailer
- Best Car Ramps For Trucks
- Best Motorcycle Ramp For Truck
Frequently Asked Questions
How do I determine the right ramp length for my trailer height and loading angle?
Measure the trailer’s loading height and compare it with the ramp length to judge the resulting incline. A longer ramp generally creates a gentler approach at the same height, while a shorter ramp can be steeper. Check the vehicle’s clearance and the ramp maker’s guidance, and confirm the ramp fits your trailer before loading.
How should I check whether a ramp’s stated capacity is enough for my vehicle and its weight distribution?
Compare the vehicle’s loaded weight with the ramp set’s stated capacity, then check whether the rating applies to the pair or each ramp. Consider how the vehicle’s weight is distributed across the ramps, including where its wheels will sit. Follow the manufacturer’s loading instructions and do not exceed any stated per-ramp limit.
What ramp-end attachment and surface conditions should I check before loading onto a trailer?
Confirm that the ramp ends are designed to attach securely to your trailer and that their shape suits its edge. Check that both ramps sit firmly, align with the vehicle’s tire paths, and cannot shift. Inspect the ramp and trailer contact surfaces for debris, damage, or conditions that could reduce traction before loading.
How should I choose between a loading ramp and a tandem maintenance ramp?
Choose a loading ramp for moving a vehicle or equipment onto a trailer, and use a tandem maintenance ramp only for its intended maintenance purpose. The MAXXHAUL Tandem Ramp is described as raising tandem-wheel vehicles during maintenance, not loading them onto a trailer. Confirm the product’s intended use before purchase.
What should I check about storage and handling before choosing a ramp style?
Check the product title and details for features that match how you will handle and store the ramps, such as folding construction or handles. Then verify the dimensions against your available storage space and intended loading setup. Do not assume a ramp is foldable, portable, or equipped with handles unless its listing states so.
Final Words
For a larger loading surface and substantial stated capacity, the VEVOR Aluminum 96-Inch pair is the lead choice. For a shorter pair, compare HECASA’s hook ends and stated capacity with the VEVOR Aluminum 60-Inch option’s straps and rating. Other picks suit different lengths, materials, or purposes; the MAXXHAUL tandem ramp is for maintenance, not trailer loading.
Before deciding, verify trailer fit, load rating, and attachment compatibility.


