Best Loading Ramps For Box Trucks: Compare 10 Options

#1 · Best Overall

1. VEVOR Aluminum Ramps

• Dimensions: 15"L x 4.1"W x 72"H
• Load Capacity: 8.81E+3 lb
• Material: Aluminum

Best for: High-capacity equipment hauling.

Why it ranks #1: The pair’s listed 8,810-pound capacity, 72-by-15-inch format, top-hook end, extension plate, and safety straps make it the strongest capacity-led option.

A listed 8,810-pound capacity sets these VEVOR aluminum ramps apart for buyers moving heavy equipment onto a truck or trailer. Their top-hook attaching ends and adjustable safety straps address ramp placement, while the rung surface adds traction for motorcycles, tractors, ATVs, UTVs, and lawn mowers.

Each ramp measures 72 inches long and 15 inches wide, giving wheeled equipment a broader track than narrow single-wheel ramps. Aluminum construction keeps the pair’s listed weight to about 61 pounds, relevant when carrying and positioning them by hand. The rung design increases friction, and the extension plate plus adjustable straps help keep the ramps secured during use. Check the 8,810-pound stated capacity against the load and the vehicle’s loading arrangement before operating.

Skip it if you need a compact, narrow pair for light equipment; PioneerWorks’ 72-inch steel ramps are rated for 1,000 pounds per pair.

This VEVOR set suits buyers needing wide aluminum tracks and a high listed capacity for equipment loading. Its 72-inch length and roughly 61-pound pair weight matter when checking truck-bed reach and planning handling.

Listed on Amazon as: VEVOR Aluminum Ramps, 8810 lbs, Heavy-Duty Ramps with Top Hook Attaching End, Universal Loading Ramp for Motorcycle, Tractor, ATV/UTV, Trucks, Lawn Mower, 72" L x 15" W, 2Pcs

#2 · Wide Heavy-Duty

2. Maxsa Aluminum Ramps

• Dimensions: 72.83"L x 15"W x 5.91"H
• Load Capacity: 6000 lb

Best for: Wide-track tractor loading.

Why it ranks #2: Its 72-by-15-inch two-piece format and listed 6,000-pound capacity suit buyers prioritizing broad ramps and substantial rated load capacity.

A 72-by-15-inch footprint gives the Maxsa Innovations ramps a broad track for tractors, ATVs, and lawn mowers approaching a truck or trailer. The listing states a 6,000-pound combined capacity, while the extended length is intended to create a gentler incline for wheeled equipment.

The 15-inch width provides more room across each ramp than narrow motorcycle tracks, which can help when positioning wider tires. Reinforced aluminum construction, solid beams, and thick cross rungs are specified to distribute weight and resist bending under heavy loads. Tightly spaced anti-slip grooves add traction as equipment climbs. At about 48.5 pounds for the set, handling is a consideration when moving the ramps between storage and the loading point; keep the stated combined capacity in view.

Skip it if you need ramps that fold for compact storage; Arejonner’s 72.5-inch folding pair includes safety straps and gloves.

These suit buyers loading tractors, mowers, or other equipment that benefits from a wide track and gentler approach. Check deck height and load distribution against the 72-inch length and stated 6,000-pound combined capacity.

Listed on Amazon as: Aluminum Loading Ramps – 6000 lbs Heavy-Duty 2-Piece Set with Top Hook Ends, Universal for ATV, UTV, Motorcycle, Tractor, Truck & Mower 72" L x 15" W

#3 · Wide Platform

3. VEVOR Tri-Fold Ramps

• Dimensions: 76.2"L x 53.9"W x 1.7"H
• Load Capacity: 1500 lb
• Material: Aluminum Alloy (Grade: 6061-T6)

Best for: Wide-platform multiwheel loading.

Why it ranks #3: The 76.2-by-53.9-inch platform gives a broad loading surface, while the listing specifies 1,500 pounds total and a recommended 3.9-to-31.5-inch height range.

A 76-by-54-inch tri-fold platform gives this VEVOR ramp broad coverage for loading cars, motorcycles, ATVs, mowers, and snow blowers. Its three-part design folds for storage, while straps and non-slip rubber fingers address ramp security and contact at the loading edge.

The extended platform is rated for 1,500 pounds total, with each of its three ramp sections rated for 500 pounds. VEVOR recommends loading heights from 3.9 to 31.5 inches, giving buyers a defined range to compare with a truck or trailer deck. The wide surface reduces the chance of tires slipping off the edges, and folding the ramp makes storage more manageable than leaving the full platform open. Aluminum alloy construction keeps the listed weight at 50.9 pounds.

Skip it if you need a lightweight pair of narrow ramps; MAXIVAMN’s aluminum two-ramp set weighs 14.4 kg and folds for storage.

Choose this for equipment that benefits from a wide platform and for loading heights within its stated 3.9-to-31.5-inch range. Its 50.9-pound weight and folded dimensions matter when planning handling and storage.

Listed on Amazon as: VEVOR Aluminum Trailer Ramps, 76 x 54 in Tri-Folding Truck Ramps with Straps & Non-Slip Rubber Fingers, 1500LBS Capacity ATV Loading Ramps for Pickup Trucks, Motorcycles, Lawn Mowers, Tractors, Carts

#4 · Highest Platform Capacity

4. VNN Tri-Fold Ramp

• Dimensions: 77"L x 54"W x 2"H
• Load Capacity: 1600 lb
• Material: Aluminum

Best for: Tailgate-protecting wide ramp.

Why it ranks #4: This 77-by-54-inch aluminum platform is listed at 1,600 pounds and has rubber-coated fingers described as protecting the tailgate surface.

Soft rubber-coated fingers are a defining feature of the VNN tri-fold ramp, gripping the tailgate while helping protect its finish from scratches or scuffs. Its 77-by-54-inch aluminum platform has a listed 1,600-pound capacity and a punched surface intended to maintain traction in wet or muddy conditions.

The 77-inch length and 54-inch width create a broad route for loading pickup-truck equipment, with the listing emphasizing stability and grip across the punched plate. Rubber-coated fingers meet the tailgate edge to reduce surface marking while securing the contact point. Aluminum construction and the stated 1,600-pound capacity define the ramp’s material and load limit. Because the product is identified as a tri-fold ramp, folding can help with storage after use; its wide platform still calls for suitable storage space.

Skip it if you have limited space for a wide platform; MAXIVAMN’s 89-inch aluminum ramps fold as a two-ramp set.

This suits pickup owners seeking a broad loading surface and a tailgate-contact feature that helps prevent scuffs. Check the 1,600-pound limit and make sure your storage area accommodates the 77-by-54-inch platform.

Listed on Amazon as: Tri-fold Motorcycle Ramp for Pickup Truck, 77L x54 W Aluminum Loading Ramp

#5 · Longest Pair

5. MAXIVAMN Aluminum Ramps

• Dimensions: 89"L x 12"W x 2"H
• Load Capacity: 1500 lb
• Material: Aluminum

Best for: Long folding equipment ramps.

Why it ranks #5: Each aluminum ramp measures 89 by 12 inches, the longest listed pair here, and the combined capacity is 1,500 pounds when used as directed.

At 89 inches long, the MAXIVAMN aluminum ramps offer an extended approach for compatible ATVs, UTVs, riding mowers, and garden tractors. Each ramp is rated for 750 pounds, and the pair’s 1,500-pound capacity depends on using both ramps with the load evenly distributed.

Each ramp measures 89 by 12 inches, giving wheeled equipment a defined track that can be spaced to match its wheel width, with tires kept centered. The listing describes a folding two-ramp setup for storage, while aluminum construction supports the stated material choice. Capacity is specified both per ramp and per pair: 750 pounds per ramp and 1,500 pounds combined. Check total equipment weight and distribute it across both ramps as directed before loading.

Skip it if you need one broad platform rather than two separate tracks; VNN’s 77-by-54-inch tri-fold ramp provides a wide loading surface.

These suit owners loading compatible wheeled equipment where an 89-inch approach and two centered tire tracks work. Match spacing to the wheel track, keep the load evenly distributed, and observe both capacity ratings.

Listed on Amazon as: Loading Ramps for Pickup Trucks, 7.5 ft Aluminum ATV Ramps, 2 Pack

#6

6. Ruedamann Folding Ramps

• Dimensions: 78.7"L x 8.5"W x 1.6"H
• Load Capacity: 600 lb
• Material: Aluminum

Best for: Low-height dirt-bike loading.

Why it ranks #6: The 78.7-inch aluminum pair supports 1,200 pounds total, with each ramp rated for 600 pounds and a stated recommended loading height up to 20 inches.

A stated 20-inch recommended loading height gives the Ruedamann pair a clear boundary for truck-bed and trailer use. Each 79-inch aluminum ramp supports up to 600 pounds, and the pair folds to about half its extended length, combining a defined loading range with more compact storage.

At 78.7 inches long and 8.5 inches wide, each ramp provides a narrow track for motorcycles and other equipment that fits its width. The manufacturer recommends use at heights up to 20 inches, so the truck or trailer deck height is central to deciding whether the incline suits your setup. Rust-resistant aluminum supports durability, while a yellow warning strip improves visibility in low light. A rubber pad on the top extension plate helps prevent slipping and reduces operating noise.

Skip it if you need a wider loading platform or a higher recommended deck height; VEVOR’s 76 x 54-inch tri-fold ramp lists a 31.5-inch upper height.

Consider this pair for motorcycles or similar equipment when the loading height stays within the stated 20-inch recommendation. Its folding aluminum design aids storage, but the 8.5-inch width calls for careful wheel alignment.

Listed on Amazon as: Ruedamann 2PC 79'' Aluminum Folding Truck Ramp, 1200 lbs Capacity

#7

7. Arejonner Folding Ramps

• Dimensions: 72.5"L x 8.7"W x 1.8"H
• Load Capacity: 1500 lb
• Material: Alloy Steel

Best for: Strapped equipment loading.

Why it ranks #7: These 72.5-inch alloy-steel ramps have a 1,500-pound listed capacity and include four safety straps, though their narrow 8.7-inch width limits the platform.

A dense perforated alloy-steel surface gives these 72.5-inch Arejonner ramps traction for wheeled equipment moving into a shed, garage, or trailer. The pair comes with four safety straps and protective gloves, so buyers get tie-downs for securing the ramps and gloves for installation alongside the loading surface.

The 72.5-by-8.7-inch ramps suit motorcycles, ATVs, lawn mowers, UTVs, golf carts, and snow blowers, according to the listing. Their perforated surface is intended to help prevent wheel slippage, while the included four straps secure the ramps during loading. Alloy-steel construction and a listed 1,500-pound capacity provide the stated load parameters; check that the equipment and loading setup stay within them. Folding construction helps when the ramps need to be put away between uses.

Skip it if you need a broad platform for loading equipment; VEVOR’s 76 x 54-inch tri-fold ramp provides a much wider surface.

Choose these for wheeled equipment that can track across narrow ramps and for loading where straps are useful. The 72.5-inch length and 1,500-pound listed capacity are key limits to consider for your box-truck loading setup.

Listed on Amazon as: 72.5" Heavy Duty Folding Loading Ramps, 1500lb Capacity, Ideal for Motorcycles, Lawn Mowers, ATVs, UTVs, and More – Pack of 2 with Safety Straps and Gloves

#8

8. Arejonner Sandblasted Ramps

• Dimensions: 71"L x 8.86"W x 3.5"H
• Load Capacity: 1500 lb
• Material: Alloy Steel

Best for: Sandblasted strapped ramps.

Why it ranks #8: The 71-inch alloy-steel pair is listed at 1,500 pounds and includes four safety straps; its 8.86-inch width is relatively narrow.

A sandblasted finish paired with dense perforations gives this Arejonner set an extra friction-focused surface for loading motorcycles, lawn mowers, ATVs, and UTVs. The 71-inch alloy-steel ramps include four safety straps and protective gloves, with a listed 1,500-pound capacity for the pair.

The 71-by-8.86-inch dimensions make these a narrow two-track option for equipment whose tires can stay centered. The sandblasted finish and perforations are specified to increase traction and help prevent wheel slipping or jamming. Four included straps secure the ramps, while gloves support installation. Alloy steel and a 34.1-pound listed weight describe the set’s construction and handling; compare the equipment’s weight with the stated 1,500-pound capacity before loading.

Skip it if you need a much wider continuous platform; VNN’s 77-by-54-inch tri-fold ramp offers broad tire coverage.

Pick this pair for equipment suited to narrow tracks when surface traction and included straps matter. Its 71-inch length, 8.86-inch width, and 1,500-pound capacity should all suit the loading point and equipment.

Listed on Amazon as: 72.5" Heavy Duty Folding Loading Ramps with Sandblasted Finish, 1500lb Capacity, Ideal for Motorcycles, Lawn Mowers, ATVs, UTVs, and More – Pack of 2 with Safety Straps and Gloves

#9

9. Evcitn Truck Ramps

• Dimensions: 78.7"L x 47.2"W x 7.5"H
• Load Capacity: 1500 lb
• Material: Iron, Metal, Plastic, Stainless Steel

Best for: Textured-surface mower loading.

Why it ranks #9: The 75-inch pair is rated for 1,500 pounds and uses a textured, perforated surface, but the listing primarily describes pickup and smaller equipment use.

A 75-inch length paired with a textured, perforated tread gives the Evcitn ramps a traction-focused route for loading mowers, motorcycles, dirt bikes, and ATVs. The pair is rated for 1,500 pounds, with reinforced construction and professional welding specified for supporting the listed combined load.

The extra-long 75-inch format can provide a less abrupt approach than a shorter ramp when the loading height and vehicle arrangement suit it. Textured treads and perforations are intended to improve grip while loading, and the listing identifies heavy-duty stainless-steel construction. At 36.4 pounds, the pair has a stated handling weight to consider when moving it into position. The listed capacity applies to the pair, so keep the equipment within that limit and distribute it across both ramps.

Skip it if you need a stated capacity for each individual ramp; PioneerWorks lists 500 pounds per ramp and 1,000 pounds per pair.

Choose this pair for compatible wheeled equipment when the 75-inch approach and textured surface suit the loading point. Its 1,500-pound rating is for the pair, so account for the full load and its distribution.

Listed on Amazon as: Truck Ramps 75" 1500 LBS 2 Pack, Extra Heavy Duty Loading Ramps for Lawn Mower, Portabe Non Slip Motorcycle Ramps for Pickup Trucks, ATV, Dirt Bikes, UTV

#10

10. PioneerWorks Steel Ramps

• Dimensions: 76.38"L x 9.06"W x 1.97"H
• Load Capacity: 1000 lb

Best for: Steel ramps for light equipment.

Why it ranks #10: These 72-inch steel ramps provide 1,000 pounds per pair and punched traction, but their lower listed capacity is less suited to heavier box-truck loads.

A punched, textured steel surface gives the PioneerWorks pair a grip-focused option for motorcycles, dirt bikes, e-bikes, bicycles, ATVs, and lawn mowers. Each 72-inch ramp is rated for 500 pounds, making the pair’s 1,000-pound total capacity explicit for buyers planning balanced two-ramp loading.

The 72-by-9-inch format is intended for truck beds, trailers, sheds, and garages, with the narrow width best considered alongside the equipment’s tire spacing. Punched texture improves tire grip, and the surface also lets water drain for easier cleaning. Rust-resistant steel is specified for durability, while the separate per-ramp rating clarifies that neither ramp should carry more than 500 pounds. Use both ramps for balanced loading and keep the combined load within 1,000 pounds.

Skip it if you need a wider ramp track or a higher individual-ramp rating; VEVOR’s 72-inch aluminum ramps are 15 inches wide and list 8,810 pounds.

This pair fits buyers moving lighter wheeled equipment into a truck bed, trailer, shed, or garage. Check the 9-inch width against tire placement and observe both the 500-pound individual and 1,000-pound pair limits.

Listed on Amazon as: PioneerWorks 2-Pack 72" Steel Ramps – 500 lb Each / 1,000 lb Pair,Silver