Best Back Blade For Atv: ATV and UTV Blades Compared

#1 · Best Overall

1. KUAFU 3-Point Scrape Blade

• Weight: 60.6 lb
• Dimensions: 48.82 x 12.6 x 9.84 in

Best for: Powder-coated receiver scraping.

Why it ranks #1: Fits ATVs and UTVs with 2-inch square receivers, uses heavy-duty steel with powder coating, and lists 48.82 inches in product dimensions.

A 2-inch square receiver connection and heavy-duty steel construction make this KUAFU scrape blade a straightforward ATV or UTV implement for scraping work. Its powder-coated surface is intended to isolate moisture and resist rust, a practical feature for equipment kept outdoors.

The stated 2-inch square receiver fit identifies the connection for compatible ATVs and UTVs, helping buyers assess the attachment point before setup. Heavy-duty steel is described as impact-resistant and resistant to damage or deformation, supporting use on demanding surfaces. Its powder-coated finish is intended to limit moisture exposure and rust, with the listing noting all-weather suitability. The blade measures 48.82 inches long and weighs 60.6 pounds, useful dimensions to consider for handling and storage.

Skip it if you want a lighter listed blade; the OLIPIC 42-inch rear blade weighs 28.3 kilograms, not less.

Choose this KUAFU if your ATV or UTV has a 2-inch square receiver and you want a steel scraper with a protective coating. Its 60.6-pound weight and 48.82-inch length matter when planning handling and storage.

Listed on Amazon as: KUAFU 3-Point Scrape Blade Implement Reciever Compatible with ATV UTV

#2 · Wide Receiver Blade

2. ECOTRIC 48-Inch Scrape Blade

• Weight: 60.9 lb

Best for: Two-inch receiver yard grading.

Why it ranks #2: Its 48-inch scrape blade is specified for ATV and UTV use with a 2-inch receiver, with automotive-grade steel and a powder-coated finish.

A 48-inch scrape blade paired with a 2-inch receiver fit gives this ECOTRIC implement a clear role in ATV or UTV land work. Its automotive-grade steel construction supports scraping and grading duties, while a powder-coated finish helps protect the surface against rust during outdoor use.

The 48-inch blade spans a useful width for scraping and leveling, and the stated 2-inch receiver fit identifies the vehicle connection this implement requires. Automotive-grade steel is specified as resistant to wear, impact, and aging, supporting repeated land-management work. Its powder-coated surface is intended to improve rust resistance, a practical consideration for equipment used outdoors. At 60.9 pounds, it is a substantial implement, so account for its weight when handling or storing it off the vehicle.

Skip it if you need a lighter implement for frequent manual handling; this one weighs 60.9 pounds.

Choose this ECOTRIC for ATV or UTV owners seeking a 48-inch scraper for land-management work and a stated 2-inch receiver connection. Its 60.9-pound weight is worth considering if you will often move it by hand.

Listed on Amazon as: ECOTRIC 3-Point 48" Scrape Blade Implement 2 Inch Receiver ATV UTV Lawn

#3 · Five-Angle Choice

3. YINTATECH ATV Scraper Blade

• Weight: 46 lb

Best for: Five-angle 2-inch receiver work.

Why it ranks #3: Designed to work with other ATV and UTV attachments using a 2-inch receiver, it offers five angle settings and weighs 46 pounds.

Five settings at 0, 7.5, and 15 degrees in either direction give this YINTATECH scraper several working angles for leveling, road smoothing, brush clearing, or backfilling. Its stated 2-inch receiver compatibility ties that flexibility to a clearly identified vehicle connection.

The 2-inch receiver compatibility identifies the connection needed for this tow-behind grader and is presented as a way to work with other ATV and UTV attachments. Five angle positions let operators choose straight scraping or turn the blade up to 15 degrees to either side for different tasks. Alloy steel is specified, and the listed weight is 46 pounds, relevant when moving the implement between storage and the vehicle. The product listing names the scraper blade as an included component.

Skip it if you need a 30-degree blade angle; the YINTATECH 42-inch box scraper tilts up to 30 degrees.

This YINTATECH is for ATV or UTV owners with a 2-inch receiver who need a multi-angle grader for surface and soil tasks. Its 15-degree limit is an important fit consideration when the work calls for stronger lateral deflection.

Listed on Amazon as: ATV Scraper Blade Implement, Tow Behind Grader Blade

#4 · Compact Tow-Behind

4. FULUPET 42-Inch Scrape Blade

• Weight: 46.2 lb
• Dimensions: 42 x 12.5 x 9.8 in

Best for: Five-position receiver grading.

Why it ranks #4: This 42-inch blade has five angle options, alloy-steel construction, and a listed weight of 46.2 pounds for ATV and UTV tasks.

Five blade-angle settings—straight, 7.5 degrees, and 15 degrees left or right—give this 42-inch FULUPET scrape blade several ways to direct grading work. It is presented for road smoothing, soil backfilling, and lane maintenance, with a 2-inch receiver connection specified in its title.

The 42-inch blade provides a defined working width, and its five angle choices let the operator select straight scraping or a modest left or right angle for road and lane work. Heavy-duty alloy steel is described as impact-resistant, while the black powder coating is intended to resist rust in harsh weather. Together, those features address demanding outdoor use and surface protection. The listing identifies a 2-inch receiver and includes tools such as scrapers and installation screws, useful details for planning attachment and setup.

Skip it if you need greater lateral blade angle; the KUAFU GO-4461 locks at 30 degrees in either direction.

Choose this FULUPET for receiver-equipped ATV or UTV owners doing driveway, lane, or soil work who value five modest angle settings. Its listed maximum is 15 degrees, so it may not suit jobs needing a sharper material-directing angle.

Listed on Amazon as: 42" Scrape Blade Implement with 5 Adjustable Angles, 3-Point Tow Behind Grading Blade Attachment for ATV UTV Lawn Garden Tractors, 2 Inch Receiver, Driveway Grader, Ground Leveler, Snow Plow

#5 · Replaceable Wear Bar

5. OLIPIC 42-Inch Rear Blade

• Weight: 28.3 kg
• Dimensions: 14.76"D x 42"W x 15.18"H

Best for: Replaceable-wear-blade grading.

Why it ranks #5: The 42-inch rear blade is listed for ATV and UTV use with a 2-inch receiver and has a replaceable 0.3-inch carbon-steel wear strip.

A replaceable 0.3-inch carbon-steel scraper blade gives this 42-inch OLIPIC rear blade a defined wear component for scraping gravel, landscaping, and snow. Its heavy-duty steel construction and rust-resistant black coating further address outdoor grading and seasonal use.

The 42-inch width gives the implement a clear coverage span for lawn, garden, and farm applications, while the replaceable scraper blade provides a way to address wear at the working edge. The listing specifies that this wear blade is 0.3-inch carbon steel. Heavy-duty high-strength steel forms the main construction, and a rust-resistant black coating is intended to support use throughout the season. The product is manually operated and weighs 28.3 kilograms, details to factor into handling and storage.

Skip it if you need a lighter stated weight; the FULUPET 42-inch blade is listed at 46.2 pounds.

This OLIPIC suits owners seeking a 42-inch manual rear blade for gravel, landscaping, snow, or general grounds work, especially those valuing a replaceable wear edge. Its 28.3-kilogram listed weight matters when moving it off the vehicle.

Listed on Amazon as: 42" Rear Blade, ATV/UTV Scrape Blade Implement, 2" Reciever Compatible 5 Adjustable Angles, for Gravel, Landscaping, Snow and More

#6

6. Guide Gear 60-Inch Blade

• Weight: 69.9 lb
• Dimensions: 62 x 14 x 7 in

Best for: Wide rut-filling driveway blade.

Why it ranks #6: Its 60-by-12-inch blade covers more width, and box ends hold dirt for filling ruts; the blade has three positions with 13-degree adjustment.

A 60-by-12-inch blade with boxed ends gives the Guide Gear attachment a wide working span and edges that hold dirt for filling ruts and holes. Its three-position adjustment and 13-degree angle setting add a way to steer the blade during driveway maintenance.

The 60-inch blade is intended for leveling large areas, so it can cover a broad driveway or dirt surface in each pass. Boxed ends hold more dirt, which the listing connects to filling ruts and holes rather than simply pushing loose material aside. A three-position blade adjusts to a 13-degree angle, offering some directional control for grading. It is described for ATV or UTV use, and its 69.9-pound weight is a consideration when handling or storing it off the vehicle.

Skip it if you need a blade that angles up to 30 degrees; the KUAFU GO-4461 provides that listed range.

This Guide Gear suits ATV or UTV owners maintaining broad driveways and filling ruts with the help of dirt-holding box ends. Consider its 13-degree adjustment and 69.9-pound weight when judging the angle range and handling your work requires.

Listed on Amazon as: Guide Gear Blade with Box Ends, 3 Point Implements, Attachment for ATV, UTV, Driveway Grader, Dirt Ground Leveler, 13-Degree Angle Adjustment, 60” x 12” Blade

#7

7. KUAFU 39.75-Inch Sleeve Hitch Blade

• Weight: 70.6 lb

Best for: Sleeve-hitch garden tractor grading.

Why it ranks #7: The heavy-duty steel blade adjusts and locks at 30 degrees in either direction, with stated compatibility for ATV and UTV use.

A sleeve-hitch connection and 30-degree angle lock give this KUAFU blade a specific fit and a useful way to steer scraped material. Its listed jobs range from snow removal to soil leveling and construction-road grading, making it relevant to varied seasonal property work.

The blade can be adjusted and locked 30 degrees in either direction, helping direct material during tasks such as leveling soil or clearing road surfaces. Heavy-duty alloy steel and a powder-coated finish address durability: the steel is described as able to face hard objects, and the coating protects the surface. The listing identifies CAT-0 lawn and garden tractor systems and compatibility with Cub Cadet, Craftsman, and MTD. Sleeve hitch and mounting hardware are included, along with installation instructions.

Skip it if you need a 2-inch receiver-mounted blade; the KUAFU GO-3028 is listed for that connection.

Pick this KUAFU for compatible sleeve-hitch garden tractors handling snow, soil, or road-surface work. The CAT-0 and named tractor compatibility details help define its fit; it is not the 2-inch receiver style listed by some other blades.

Listed on Amazon as: KUAFU 39.75" Sleeve Hitch Blade Compatible with ATV UTV Garden Tractors

#8

8. ECOTRIC 39.75-Inch Box Scraper

Best for: Adaptable box-scraper grading.

Why it ranks #8: Its 39.75-inch working width and removable side panel and scarifier rod offer a flexible box-scraper setup for ATV, UTV, and lawn mower use.

A detachable side panel and scarifier rod make the ECOTRIC 39.75-inch box scraper adaptable to different grading tasks. Its blade also locks at a 30-degree angle in any direction, letting operators redirect material rather than relying on a fixed straight-ahead scrape.

The 39.75-inch working width covers a broader strip per pass than a narrow hand tool, and the listing says that moving more material can reduce use frequency. Detachable side panels and a scarifier rod let you change the scraper configuration for the task at hand. The blade locks at a 30-degree angle in any direction, supporting angled material movement. It is listed for most UTV, ATV, grader, and lawn-tractor box-blade attachments, so check that application against your setup.

Skip it if you want a wider listed blade; the Guide Gear 60-inch blade covers a broader span.

This ECOTRIC suits operators who want a configurable box scraper for ATV, UTV, grader, or lawn-tractor attachment work. Its detachable components and directional blade angle add flexibility, while the 39.75-inch width sets a clear coverage boundary.

Listed on Amazon as: ECOTRIC 39.75" Box Scraper w/Adjustable Blade Compatible with UTV Grader

#9

9. YINTATECH 42-Inch Box Scraper

• Weight: 103 lb
• Dimensions: 46.5"D x 42"W x 9.5"H

Best for: Wide angled box-scraper coverage.

Why it ranks #9: The 42-inch box scraper tilts up to 30 degrees left or right and has removable side plates and scarifier bar for varied grading tasks.

A 42-inch working width gives this YINTATECH box scraper broad coverage, while its 30-degree left-or-right tilt lets an operator push material to the side. That combination is useful for driveway grading or berm work, not just straight dragging across a surface.

The 42-inch width covers a substantial strip while leveling plots, breaking soil, or preparing gardens and pastures. Its box blade tilts up to 30 degrees to either side, so material can be pushed laterally for jobs such as grading a driveway or forming a berm. The side plate and scarifier bar are removable, allowing a change in configuration for different tasks. At 103 pounds, it is notably heavy to handle when detached, a practical factor for storage and installation.

Skip it if you need to lift or store an implement frequently; its listed weight is 103 pounds.

This YINTATECH fits operators seeking wide box-scraper coverage and side-directed grading for driveways, plots, or gardens. Its removable parts add configuration options, but its 103-pound weight deserves attention when planning handling and storage.

Listed on Amazon as: YINTATECH 42" Tow Behind Box Scraper Fit for ATV UTV Grader

#10

10. Kolpin 48-Inch Rear Blade

• Weight: 68.2 lb
• Dimensions: 54 x 13.5 x 7 in

Best for: Earlier-model ATV rear plowing.

Why it ranks #10: This ATV, UTV, or SxS rear blade has five-position angling and a reversible wear bar, but its stated fit is limited to models 2009 and earlier.

A replaceable, reversible wear bar and five-position angling give the Kolpin 48-inch rear blade a practical combination for repeat plowing and directional adjustment. Its 13-inch blade height and stated fit for models from 2009 and earlier are important specifications for assessing its use.

The 48-inch blade offers a broad working span, while five-position angling lets the operator choose among several blade directions for rear-plow work. Its 13-inch height defines the blade profile, and the replaceable, reversible wear bar can be turned or replaced as it wears, extending the working life of that edge. Installation uses only two fasteners, simplifying the listed mounting process. Compatibility is limited in the supplied information to models from 2009 and earlier, so model age is central to fit.

Skip it if you have a model newer than 2009; this listing specifies models from 2009 and earlier.

This Kolpin is for owners of compatible 2009-and-earlier ATV, UTV, or SxS models seeking a 48-inch rear plow with adjustable angling. The model-year boundary is essential: the supplied fit information does not extend beyond 2009.

Listed on Amazon as: Kolpin Rear Blade, 48-Inch – FRB48, Black