A strong electric jack for a dump trailer needs a capacity suited to the trailer’s tongue load, a mounting style that fits its frame, and a practical way to operate it. The POLESTAR Electric Trailer Jack 7500 lbs leads this list because it is an A-frame model rated for a 7,500-pound dynamic load and 10,000-pound static lifting power, and it includes a crank and waterproof cover. These products vary in capacity, mounting descriptions, and power approach: most are 12V electric jacks, while one uses a cordless drill.
None of the supplied listings specifically confirms dump-trailer compatibility, so verify the mounting pattern, tongue load, and clearance against your trailer before buying. The comparison below separates the listed specs from the fit questions that still need checking.
The POLESTAR Electric Trailer Jack 7500 lbs is the strongest all-around listed choice for a dump trailer with a compatible A-frame mount. It has a 7,500-pound dynamic load rating and lists 10,000 pounds of static lifting power, plus a manual crank and waterproof cover. Confirm that your trailer’s jack plate and tongue load suit it: the product data does not state that it has been specifically tested or approved for dump trailers.
Our Top Picks
Best OverallPOLESTAR Electric Trailer Jack 7500 lbs
Its A-frame design and 7,500-pound dynamic rating suit a compatible trailer tongue, while listed 10,000-pound static lifting power adds capacity headroom.
View on Amazon
Highest Listed CapacityKYX Electric Trailer Jack 7500LBs
The 12V DC motor and 7,500-pound rating make it a high-capacity A-frame option; carbon steel has an anti-rust coating.
View on Amazon
Built-In Safety FeaturesSEALIGHT Electric Trailer Jack 7500lbs
Its 7,500-pound rating is paired with LED lighting and a circuit breaker that cuts power during improper operation, useful details for jack use.
View on Amazon- Extended Travel FZZD Electric Trailer Jack 5500lbs
- 7-Way Plug Option Kohree Electric Trailer Jack 6000 lbs
Compare Electric Trailer Jack Options
| # | Product | Load Capacity | Material | Compatible with Vehicle Type | Buy |
|---|---|---|---|---|---|
| 1 | 1. POLESTAR Electric Trailer Jack 7500 lbsBest Overall | 7500 lb | Alloy Steel | RV, Trailer, Truck | View on Amazon |
| 2 | 2. KYX Electric Trailer Jack 7500LBsHighest Listed Capacity | 7500 LB | Carbon Steel | RV, Trailer | View on Amazon |
| 3 | 3. SEALIGHT Electric Trailer Jack 7500lbsBuilt-In Safety Features | 7500 lb | Carbon Steel | RV | View on Amazon |
| 4 | 4. POLESTAR Electric Trailer Jack 5000lbs5,000-Pound A-Frame Lifting | 5000 lb | Alloy Steel | RV, Trailer, Truck | View on Amazon |
| 5 | 5. FZZD Electric Trailer Jack 5500lbsExtended Travel | 5500 lb | Alloy Steel | Boat Trailer, RV, Yacht Trailer | View on Amazon |
| 6 | 6. Kohree Electric Trailer Jack 6000 lbs7-Way Plug Option | 6000 lb | Alloy Steel | Trailer | View on Amazon |
| 7 | 7. KYX Swivel Bolt-on Jack 7500LBsSwivel Bolt-On Trailer Setup | 7500 lb | Aluminum, Plastic, Steel | RV | View on Amazon |
| 8 | 8. Dnigh Electric Trailer Jack 7600LBSRemote-Controlled Trailer Operation | 7600 lb | Iron-Zinc Alloy | RV, Trailer | View on Amazon |
| 9 | 9. Kohree Drill-Operated Trailer Jack 8000 lbsCordless-Drill Trailer Lifting | 8000 lb | Alloy Steel | RV, Trailer | View on Amazon |
| 10 | 10. VEVOR Electric Trailer Jack 4000 lbsCompact 4,000-Pound Tongue Jack | 4000 lb | Carbon Steel | Trailer | View on Amazon |
Detailed Reviews: Best Electric Jack For Dump Trailer

#1 · Best Overall
1. POLESTAR Electric Trailer Jack 7500 lbs
- Load Capacity: 7500 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: RV, Trailer, Truck
Best for: Higher-Capacity A-Frame Lifting.
Why it ranks #1: Its A-frame design and 7,500-pound dynamic rating suit a compatible trailer tongue, while listed 10,000-pound static lifting power adds capacity headroom.
A stated 10,000-pound static lifting capacity sets this POLESTAR apart for buyers who need more support than its 7,500-pound dynamic rating. The alloy-steel A-frame jack includes a waterproof cover and crank, giving owners both outdoor protection and a manual operating option alongside powered lifting.
POLESTAR specifies a 7,500-pound dynamic load and a 10,000-pound static lifting capacity, so buyers can distinguish its operating load figure from its static figure when evaluating a trailer setup. The alloy-steel construction suits a heavy-duty jack, while the included waterproof cover is useful for outdoor storage or exposure. A crank is also included as a manual option. Its listed compatibility covers RVs, trailers, and trucks, broadening the stated vehicle types beyond RV-only listings.
- 7,500-pound dynamic capacity
- 10,000-pound static lifting capacity
- Alloy-steel construction
- Waterproof cover and crank included
- The dynamic rating is 7,500 pounds; the higher 10,000-pound figure is static capacity.
Skip it if you need a swivel bolt-on mounting style; the KYX 7500-pound swivel bolt-on jack specifies that configuration.
This POLESTAR fits buyers seeking an A-frame jack with a 7,500-pound dynamic rating and a separately stated 10,000-pound static capacity. Its cover and crank add flexibility, but keep the dynamic-versus-static distinction central to your selection.
Full product details
| Brand | POLESTAR |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | RV, Trailer, Truck |
| Included Components | Crank, Electric Trailer Jack, Waterproof Cover |
| Item Dimensions | 7.28 x 4.72 x 32.28 inches |
| Item Weight | 23.9 pounds |
| Load Capacity | 7500 Pounds |
| Manufacturer | POLESTAR |
| Part Number | 10201175 |
| Manufacturer Warranty Description | 1 Year Warranty |
| Material | Alloy Steel |
| Model Number | Electric Trailer Jack |
| Style Name | Electric Trailer Jack |
Listed on Amazon as: POLESTAR Electric Trailer Jack, 7500lbs Electric Power A-Frame Tongue Jack
View on Amazon
#2 · Highest Listed Capacity
2. KYX Electric Trailer Jack 7500LBs
- Load Capacity: 7500 LB
- Material: Carbon Steel
- Compatible with Vehicle Type: RV, Trailer
Best for: Outdoor A-Frame Trailer Owner.
Why it ranks #2: The 12V DC motor and 7,500-pound rating make it a high-capacity A-frame option; carbon steel has an anti-rust coating.
A 7,500-pound capacity paired with a 12V DC motor makes the KYX Electric Trailer Jack a higher-capacity option for raising or lowering an A-frame trailer. Its carbon-steel body has an anti-rust coating, a useful combination for owners whose trailer sees water splashes and outdoor exposure.
The 12V DC motor handles powered raising and lowering, reducing reliance on manual cranking during routine hitching and setup. KYX lists a 7,500-pound load capacity, giving owners a clear figure to weigh against their trailer requirements. The carbon-steel construction and anti-rust coating are intended to resist harsh outdoor conditions and water splashes. The listing identifies RVs and trailers as compatible vehicle types and includes a waterproof cover in the title, though the included-components field is unspecified.
- 7,500-pound load capacity
- 12V DC motor for powered raising and lowering
- Carbon steel with anti-rust coating
- Waterproof cover identified in the product title
- The included-components listing is unspecified, so supplied accessories are not clearly itemized.
Skip it if you need a confirmed accessory list in the specifications; the POLESTAR 7500-pound jack explicitly lists a crank and waterproof cover.
Consider the KYX if your A-frame trailer or RV needs its stated 7,500-pound capacity and sees outdoor exposure. Its coated carbon steel addresses splash resistance, while buyers who require a clearly itemized crank or other accessories should compare listings.
Full product details
| Brand | KYX |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | RV, Trailer |
| Included Components | / |
| Load Capacity | 7500 LB |
| Manufacturer | KYX |
| Part Number | Z1 |
| Manufacturer Warranty Description | 1 Year Warranty |
| Material | Carbon Steel |
| Model Number | KYOZZZ52700 |
| Style Name | 7500LB |
Listed on Amazon as: KYX Electric Trailer Jack 7500LBs,Electric Jack with Waterproof Cover
View on Amazon
#3 · Built-In Safety Features
3. SEALIGHT Electric Trailer Jack 7500lbs
- Load Capacity: 7500 lb
- Material: Carbon Steel
- Compatible with Vehicle Type: RV
Best for: Nighttime Lifting and Visibility.
Why it ranks #3: Its 7,500-pound rating is paired with LED lighting and a circuit breaker that cuts power during improper operation, useful details for jack use.
Built-in LED lights give the SEALIGHT Electric Trailer Jack a practical advantage for nighttime lifting, illuminating the work area as its 12V DC motor handles loads up to 7,500 pounds. A built-in circuit breaker adds power-off protection if the jack is improperly operated.
The LED lights support visibility during nighttime lifting, making this a relevant choice for owners who hitch or level after dark. Its 12V DC motor and 7,500-pound capacity provide powered operation at a stated load limit. The built-in circuit breaker automatically triggers power-off protection if the jack is improperly operated. Carbon-steel construction rounds out the listed specification, while the title identifies it for A-frame and RV trailer use; account for that stated fit when selecting a jack.
- Built-in LED lights for nighttime lifting
- 7,500-pound load capacity
- 12V DC motor
- Circuit breaker provides power-off protection if improperly operated
- The listed vehicle compatibility specifies RVs rather than a broader range of trailer types.
Skip it if you want a listed boat- or truck-compatible jack; the POLESTAR 7500-pound A-frame model names boats and trucks as compatible.
Choose the SEALIGHT if nighttime visibility and built-in circuit-breaker protection matter for your A-frame or RV trailer workflow. Its 7,500-pound rating sets the capacity boundary, and its listed compatibility is specifically RV-focused.
Full product details
| Brand | SEALIGHT |
|---|---|
| Color | black |
| Compatible with Vehicle Type | RV |
| Included Components | Comes with housing |
| Load Capacity | 7500 pounds |
| Manufacturer | SEALIGHT |
| Part Number | 1642FLJ002XUS |
| Manufacturer Warranty Description | 1 Year Manufacturer |
| Material | Carbon Steel |
| Model Number | jack |
| Style Name | 7500lbs |
Listed on Amazon as: SEALIGHT Electric Trailer Jack 7500lbs, Waterproof for A-Frame&RV Trailer
View on Amazon
#4
4. POLESTAR Electric Trailer Jack 5000lbs
- Load Capacity: 5000 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: RV, Trailer, Truck
Best for: 5,000-Pound A-Frame Lifting.
Why it ranks #4: This alloy-steel A-frame jack includes a crank and waterproof cover, but its 5,000-pound dynamic rating is below the higher-capacity options.
A 5,000-pound dynamic capacity gives the POLESTAR Electric Trailer Jack a clear role for buyers whose trailer tongue load falls within its stated limit. Its electric operation replaces repeated manual cranking for raising and lowering, while the included crank offers a manual backup option when needed.
The alloy-steel construction pairs with a 5,000-pound dynamic load rating, giving trailer and RV owners a stated capacity to compare against their tongue load. The included waterproof cover helps protect the jack when it is exposed to outdoor conditions, and the crank provides another operating option alongside electric lifting. At 21.7 pounds and 32.28 inches tall, it is a substantial A-frame accessory, so account for its dimensions and weight when planning installation and storage.
- 5,000-pound dynamic load capacity
- Alloy-steel construction
- Waterproof cover included
- Crank included for manual operation
- Its 5,000-pound dynamic rating is below higher-capacity options in this roundup.
Skip it if you need a rating above 5,000 pounds; the POLESTAR 7500-pound A-frame jack offers a higher stated dynamic capacity.
Choose this POLESTAR for an A-frame trailer, RV, boat, or truck setup whose lifting needs fit the 5,000-pound dynamic rating. The included cover and crank add practical options, but heavier tongue loads call for a higher-capacity model.
Full product details
| Brand | POLESTAR |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | RV, Trailer, Truck |
| Included Components | Crank, Electric Trailer Jack, Waterproof Cover |
| Item Dimensions | 7.28 x 9.84 x 32.28 inches |
| Item Weight | 21.7 pounds |
| Load Capacity | 5000 Pound |
| Manufacturer | POLESTAR |
| Part Number | 10201091 |
| Manufacturer Warranty Description | 1 Year Warranty |
| Material | Alloy Steel |
| Model Number | 10201091 |
| Style Name | Electric Trailer Jack |
Listed on Amazon as: POLESTAR Electric Trailer Jack, 5000lbs Electric Power A-Frame Tongue Jack
View on Amazon
#5 · Extended Travel
5. FZZD Electric Trailer Jack 5500lbs
- Load Capacity: 5500 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Boat Trailer, RV, Yacht Trailer
Best for: Adjustable-Height A-Frame Work.
Why it ranks #5: It lists 22.6 inches of vertical travel and a 5,500-pound lifting rating, with a drop leg and auto-resetting circuit breaker.
A 22.6-inch vertical travel range and four-level height adjustment give the FZZD jack flexibility for different trailer tongue heights. Its 12V DC motor raises or lowers an A-frame trailer at the press of a button, with a 5,500-pound lifting capacity and 7,500-pound support capacity stated separately.
The listed lifting range runs from 3 to 26.2 inches, and four-level height adjustment lets owners adapt the jack’s setup to trailer tongue height. A high-torque 12V DC motor enables one-button raising and lowering, streamlining hitching and leveling compared with manual-only operation. FZZD lists 5,500 pounds of lifting capacity and 7,500 pounds of support capacity, figures that should not be treated as identical. The included drop leg supports the adjustable-height setup, and compatibility includes boat, RV, and yacht trailers.
- 22.6-inch vertical travel
- Four-level height adjustment
- 12V DC one-button electric operation
- Drop leg included
- Lifting capacity is 5,500 pounds, below its separately stated 7,500-pound support capacity.
Skip it if you need a lifting rating above 5,500 pounds; the Kohree 8000-pound drill-operated jack lists a higher load capacity.
The FZZD suits buyers who value adjustable height and button-operated lifting for an A-frame boat, RV, or yacht trailer. Check the 5,500-pound lifting figure against your needs; its 7,500-pound support rating is a separate specification.
Full product details
| Brand | FZZD |
|---|---|
| Color | Black-Side Mount |
| Compatible with Vehicle Type | Boat Trailer, RV, Yacht Trailer |
| Included Components | Drop leg |
| Item Dimensions | 7.8 x 5.48 x 55.1 inches |
| Item Weight | 26 pounds |
| Load Capacity | 5500 Pounds |
| Manufacturer | FZZD |
| Part Number | HZ-10-N |
| Manufacturer Warranty Description | 1 year |
| Material | Alloy Steel |
| Model Number | Electric Trailer Jack 5500lbs |
Listed on Amazon as: 5500-7500lbs Electric Trailer Jack, 22.6" Vertical Travel, 12V DC
View on Amazon
#6 · 7-Way Plug Option
6. Kohree Electric Trailer Jack 6000 lbs
- Load Capacity: 6000 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Trailer
Best for: 7-Way Plug-In Trailer Setup.
Why it ranks #6: Its 6,000-pound capacity and 7-way trailer connector offer a distinct hookup approach; the listing includes a cover, crank, and mounting bolts.
A standard 7-way trailer connector gives the Kohree 6000-pound electric jack a plug-in power connection for compatible trailer setups. Combined with one-button operation, it supports a straightforward hitching workflow for RVs, campers, and travel trailers without presenting the connection as a universal fit.
The 7-way connector is intended to make connection to a compatible trailer quick, while one-button operation simplifies extending and retracting the jack during hitching or leveling. Its 6,000-pound capacity provides the stated load limit, and alloy-steel construction supplies the listed material. The package includes a jack cover, manual crank handle, and three mounting bolts, helping buyers account for installation and storage items. Kohree also notes that after long periods out of use, the inner motor may need reactivation with a sizeable instantaneous current.
- 7-way trailer connector
- 6,000-pound load capacity
- One-button operation
- Cover, manual crank handle, and three mounting bolts included
- After extended non-use, the inner motor may need reactivation with a sizeable instantaneous current.
Skip it if you want a jack operated by a cordless drill rather than a 7-way-powered setup; the Kohree 8000-pound model accepts a 20–24V drill.
Pick this Kohree for a compatible 7-way trailer connection and a 6,000-pound capacity on an RV, camper, or travel trailer. Its included mounting hardware and crank help with setup, but note the stated motor-reactivation guidance after long storage.
Full product details
| Brand | Kohree |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Trailer |
| Included Components | 1x Electric Trailer Jack, 1x Jack Cover, 1x Manual Crank Handle, 3x Bolt Mounting |
| Load Capacity | 6000 Pounds |
| Manufacturer | KOHREE |
| Part Number | KR1214-KO-CA-FBA-1 |
| Manufacturer Warranty Description | 1 Year |
| Material | Alloy Steel |
| Model Number | Jack |
Listed on Amazon as: Kohree 6000 lbs Electric Trailer Jack with 7-Way Plug, 12V DV, A-Frame
View on Amazon
#7
7. KYX Swivel Bolt-on Jack 7500LBs
- Load Capacity: 7500 lb
- Material: Aluminum, Plastic, Steel
- Compatible with Vehicle Type: RV
Best for: Swivel Bolt-On Trailer Setup.
Why it ranks #7: The 7,500-pound rating is substantial, but its swivel bolt-on format differs from the A-frame models and requires a matching trailer mount.
A swivel bolt-on configuration distinguishes this KYX jack from fixed-style options, giving buyers a mounting style explicitly identified for a swivel bolt-on trailer. Its 12V DC motor and 7,500-pound capacity support powered raising and lowering, while carbon steel with an anti-rust coating addresses exposure to splashes.
The swivel bolt-on form is the central fit consideration: it is specified for a swivel bolt-on trailer, so buyers can assess that mounting arrangement before choosing it. A 12V DC motor powers raising and lowering, and the 7,500-pound load rating provides a stated capacity benchmark. The carbon-steel body has an anti-rust coating intended to resist outdoor conditions and water splashes. The listing includes an electric jack and gives dimensions of 32 by 6 by 9 inches for installation planning.
- Swivel bolt-on configuration
- 7,500-pound load capacity
- 12V DC motor for powered operation
- Anti-rust coating on carbon steel
- The specifications identify RV compatibility, not a broader list of vehicle types.
Skip it if you need a clearly specified RV-and-trailer compatibility list; the KYX 7500-pound A-frame jack names both vehicle types.
This KYX suits buyers whose trailer uses a swivel bolt-on mounting arrangement and whose lifting needs fit the 7,500-pound rating. Check that mounting style against your setup; the listing’s stated vehicle compatibility is limited to RVs.
Full product details
| Brand | KYX |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | RV |
| Included Components | electric jack |
| Item Dimensions | 32 x 6 x 9 inches |
| Item Weight | 24 pounds |
| Load Capacity | 7500 Pounds |
| Manufacturer | KYX |
| Part Number | 4980TJS005GUS |
| Manufacturer Warranty Description | 1 year manufacturer |
| Material | Aluminum, Plastic, Steel |
| Model Number | 00500 |
| Style Name | Electric Trailer Jack |
Listed on Amazon as: KYX Electric Trailer Jack 7500LBs, Elec Swivel Bolt-on Jack with Cover
View on Amazon
#8
8. Dnigh Electric Trailer Jack 7600LBS
- Load Capacity: 7600 lb
- Material: Iron-Zinc Alloy
- Compatible with Vehicle Type: RV, Trailer
Best for: Remote-Controlled Trailer Operation.
Why it ranks #8: Its listed 7,600-pound capacity and two remote controls are notable, but the supplied specifications do not clarify mounting style or power details.
Two remote controls are named in the Dnigh jack’s title, giving it a remote-operation focus for buyers who want to control trailer lifting without relying solely on a local switch. Its 7,600-pound load capacity and IP65 waterproof claim are additional listed points for RV and trailer owners to weigh.
The two remote controls are the clearest workflow differentiator in the supplied listing, while the 7,600-pound capacity gives buyers a specific load figure for comparison with their trailer requirements. The title also states IP65 waterproofing, a relevant detail for an accessory used around outdoor trailer setups. Dnigh lists iron-zinc alloy material and dimensions of 3.5 by 3.5 by 30 inches, useful facts when considering construction and space. The included-components field lists the electric jack only.
- Two remote controls identified in the title
- 7,600-pound load capacity
- IP65 waterproof claim in the title
- Iron-zinc alloy construction
- The included-components field lists only the electric jack, not the title’s two remote controls.
Skip it if you need a listed crank and waterproof cover in the package; the POLESTAR 7500-pound A-frame jack explicitly includes both.
This Dnigh is for RV and trailer owners drawn to remote operation and a stated 7,600-pound capacity. The title specifies two remotes and IP65 waterproofing, but the included-components field lists only the jack, so accessory details matter.
Full product details
| Brand | Dnigh |
|---|---|
| Color | black |
| Compatible with Vehicle Type | RV, Trailer |
| Included Components | Electric Trailer Jack |
| Item Dimensions | 3.5 x 3.5 x 30 inches |
| Item Weight | 11.8 kg |
| Load Capacity | 7600 Pounds |
| Manufacturer | Dnigh |
| Part Number | QJD222 |
| Manufacturer Warranty Description | 1 Year Manufacturer |
| Material | Iron-Zinc Alloy |
| Model Number | WRUU76-VCU |
Listed on Amazon as: 7600LBS Electric Trailer Jack with 2 Remote Control, IP65 Waterproof
View on Amazon
#9
9. Kohree Drill-Operated Trailer Jack 8000 lbs
- Load Capacity: 8000 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: RV, Trailer
Best for: Cordless-Drill Trailer Lifting.
Why it ranks #9: The 8,000-pound rating is the highest listed, but operation requires a 20–24V cordless drill rather than a built-in 12V motor.
Operation with a 20–24V cordless drill makes this Kohree jack an alternative to a dedicated 12V motor-powered setup, with a listed 8,000-pound capacity. Its high-strength steel, galvanized tubes, reinforced inner gear, and oversized foot plate target stable lifting, including on rough or uneven ground.
The drill-operated mechanism works with a 20–24V cordless drill, giving owners a way to power lifting without relying on a built-in 12V motor. Kohree lists an 8,000-pound capacity, while thickened galvanized tubes, a reinforced inner gear, and an oversized foot plate are specified to support stability on uneven ground. A manual handle and drill socket are included. The operation guidance recommends using the handle when raising and the drill when lowering, a workflow to keep in mind before installation.
- 8,000-pound load capacity
- Works with 20–24V cordless drills
- Oversized foot plate for stable lifting on uneven ground
- Manual handle and drill socket included
- Powered operation depends on a compatible 20–24V cordless drill.
Skip it if you need a self-contained 12V DC motor and one-button controls; the FZZD 5500-pound jack has a built-in 12V motor.
This Kohree suits buyers who already use a 20–24V cordless drill and want an 8,000-pound-rated jack for RV or trailer lifting. Factor in the specified handle-raising, drill-lowering workflow and the need for a compatible drill.
Full product details
| Brand | Kohree |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | RV, Trailer |
| Included Components | Trailer Jack x 1, 1x Handle, 1x Drill Socket, Mounting accessories (nut+bolt+frame) |
| Item Dimensions | 27.7 x 9 x 7 inches |
| Item Weight | 26 pounds |
| Load Capacity | 8000 Pounds |
| Manufacturer | KOHREE |
| Part Number | KR1282-KO-CA-FBA-1 |
| Manufacturer Warranty Description | Kohree Service |
| Material | Alloy Steel |
| Model Number | KR1282 |
Listed on Amazon as: Kohree 8000 lbs Trailer Jack, 20-24V Electric Drill–Operated, Heavy Duty
View on Amazon
#10
10. VEVOR Electric Trailer Jack 4000 lbs
- Load Capacity: 4000 lb
- Material: Carbon Steel
- Compatible with Vehicle Type: Trailer
Best for: Compact 4,000-Pound Tongue Jack.
Why it ranks #10: Its 4,000-pound rating and trailer compatibility may suit lighter tongue loads, but it has the lowest listed capacity in this group.
At 9.8 kilograms, the VEVOR Electric Trailer Jack is a comparatively light listed option with a 4,000-pound lifting capacity. Its carbon-steel body has a protective coating for splashes and outdoor conditions, while a waterproof sunshade cover and crank handle come in the package.
The 4,000-pound capacity gives buyers a clear upper specification for evaluating a trailer tongue setup, while the 9.8-kilogram listed weight may ease handling during installation or removal. Carbon steel with a protective coating is intended to withstand splashes and tough outdoor conditions. The included waterproof sunshade cover adds protection, and the crank handle supplies a manual option. With a stated 9.84-to-33.85-inch height range in the title, buyers can consider its reach alongside their trailer’s tongue-height requirements.
- 4,000-pound lifting capacity
- 9.8-kilogram listed weight
- Protective coating on carbon steel
- Waterproof sunshade cover and crank handle included
- Its 4,000-pound capacity is lower than the higher-rated jacks in this roundup.
Skip it if you need capacity above 4,000 pounds; the POLESTAR 5000-pound A-frame jack lists a higher dynamic load rating.
Consider the VEVOR for a trailer setup that fits its 4,000-pound capacity and benefits from a lighter listed weight, protective coating, and included cover. Its height range and capacity should both suit your installation.
Full product details
| Brand | VEVOR |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Trailer |
| Included Components | 1 x Trailer Jack 1 x Crank Handle 1 x Waterproof Sunshade Cover |
| Item Dimensions | 33.85 inches |
| Item Weight | 9.8 kg |
| Load Capacity | 4000 pounds |
| Manufacturer | VEVOR |
| Part Number | 4000 lbs Electric Trailer Jack |
| Manufacturer Warranty Description | 2 Year Manufacturer |
| Material | Carbon Steel |
| Model Number | EJ3550B |
| Style Name | 4000LBS |
Check mount fit before choosing capacity
A jack’s capacity does not establish that it will physically fit a dump trailer; confirm the mount before comparing ratings. Most products here describe an A-frame or tongue-jack format, including the POLESTAR Electric Trailer Jack 7500 lbs, KYX Electric Trailer Jack 7500LBs, and SEALIGHT Electric Trailer Jack 7500lbs. The KYX Swivel Bolt-on Jack 7500LBs is explicitly a swivel bolt-on design, while the FZZD Electric Trailer Jack 5500lbs is labeled side-mount.
Those formats are not interchangeable by assumption. Check your trailer’s jack plate or mounting surface, bolt arrangement, available clearance, and required jack height against the manufacturer’s installation details.
The listings do not provide a shared mounting-pattern measurement, and dump-trailer compatibility is not explicitly confirmed for any product. A high-capacity jack that cannot be secured to the trailer correctly is not a suitable choice.
Avoid treating tongue support as unloading support
A trailer jack’s stated capacity should not be treated as proof that it can support a dump trailer while the body is raised or material is unloading. The POLESTAR Electric Trailer Jack 7500 lbs listing distinguishes a 7,500-pound dynamic load from 10,000 pounds of static lifting power, while the POLESTAR Electric Trailer Jack 5000lbs lists 5,000 pounds dynamic and 7,500 pounds static. Those figures describe the jack’s stated capacity, not a dump-trailer operating procedure or a safe load at every extension.
Confirm the trailer maker’s instructions for tongue loading and unloading, and use the stabilizing equipment specified for the job. Do not assume that a jack should bear the raised body’s shifting load.
For ordinary hitching and tongue support, match the rating to the actual load and verify the installation; for unloading, follow the trailer manufacturer’s separate safety guidance.
How to Choose a Dump Trailer Electric Jack
Capacity and the load being lifted
Choose a rating based on the tongue load the jack must lift, not the dump trailer’s full gross weight alone. Listed capacities range from 4,000 pounds for the VEVOR Electric Trailer Jack 4000 lbs to 8,000 pounds for the Kohree Drill-Operated Trailer Jack 8000 lbs; several models list 7,500 pounds. The POLESTAR Electric Trailer Jack 7500 lbs separately states 10,000 pounds of static lifting power, so compare like-for-like capacity descriptions rather than assuming all figures mean the same thing.
A lighter trailer tongue may suit a lower-rated option, while buyers needing more stated capacity can look at a 7,500-pound model. Confirm the actual tongue load and the manufacturer’s rating method before choosing.
Mounting style and trailer fit
Look for a mounting style that matches your trailer’s jack plate and available space. The product set includes several A-frame or tongue-jack descriptions, a swivel bolt-on KYX Swivel Bolt-on Jack 7500LBs, and the side-mount FZZD Electric Trailer Jack 5500lbs. The Kohree Drill-Operated Trailer Jack 8000 lbs is a heavy-duty option, but its supplied details do not establish a particular mount style.
These are meaningful differences: a swivel bolt-on or side mount should not be presumed to replace an A-frame jack without compatible hardware and clearance. Buyers with an existing A-frame plate should first compare A-frame listings; those with a different mounting arrangement need to confirm fit directly from installation dimensions or the manufacturer.
Power method and included backup
Choose a power approach that suits your trailer’s electrical setup and the way you want to operate the jack. Most listings describe 12V electric operation, including the KYX Electric Trailer Jack 7500LBs with a 12V DC motor. The Kohree Drill-Operated Trailer Jack 8000 lbs instead requires a 20–24V cordless drill and includes a drill socket and handle.
Some models add a manual crank: both POLESTAR jacks list one, and the 6,000-pound Kohree includes a manual crank handle. The Kohree 7-way model connects through a standard 7-way trailer plug.
A buyer wanting a drill-based option may prefer the 8,000-pound model; buyers seeking a listed trailer-plug connection or manual crank should compare those included details and confirm their setup.
Which electric jack suits your dump trailer?
For a dump trailer with a compatible A-frame mount and a need for substantial stated capacity, choose the POLESTAR Electric Trailer Jack 7500 lbs: it lists 7,500-pound dynamic capacity, 10,000-pound static lifting power, a crank, and a waterproof cover. If you want a 7,500-pound option with a 12V DC motor and coated carbon steel, consider the KYX Electric Trailer Jack 7500LBs. For a different mount, the KYX Swivel Bolt-on Jack 7500LBs or FZZD Electric Trailer Jack 5500lbs may be worth checking only if your trailer’s hardware matches.
The Kohree Drill-Operated Trailer Jack 8000 lbs suits buyers prepared to use a compatible cordless drill. Before ordering, verify tongue load, mount pattern, clearance, and operating guidance; none of these listings explicitly confirms dump-trailer approval.
Related Buying Guides
- Best Jack For Dump Trailer
- Best Electric Trailer Jack
- Best Dump Trailer Hydraulic Jack
- Best Electric Jack For Travel Trailer
- Best Tires For Dump Trailer
- Best Electric Jack For Gooseneck Trailer
Frequently Asked Questions
How do I confirm whether an electric jack’s mounting plate fits my dump trailer?
Compare the jack’s mount type and hole pattern with your trailer’s jack plate before ordering. Check bolt spacing, plate shape, clearance around the tongue, and whether a swivel or A-frame mount is required. If the listing does not give enough detail, confirm measurements with the seller or manufacturer rather than assuming compatibility.
How much jack capacity should I allow for a loaded dump trailer’s tongue weight?
Choose capacity based on the tongue load the jack must lift, not the trailer’s gross weight alone. Determine the loaded tongue weight using reliable trailer guidance or measurement, then select a jack with suitable stated lifting capacity. Verify whether a listing’s rating is dynamic or static, since those ratings describe different conditions.
Can an electric trailer jack safely support a dump trailer while it is unloading?
Do not assume an electric trailer jack is suitable to support a dump trailer during unloading. The listings do not establish dump-trailer approval or provide unloading guidance. Follow the trailer and jack manufacturers’ instructions, use the trailer’s designated stabilizing equipment, and keep people clear of the raised bed and other potential hazards.
What should I check before choosing a jack with a different mounting style?
Confirm that the trailer’s existing hardware accepts the jack’s mounting style, such as an A-frame or bolt-on swivel mount. Also check the mount pattern, available clearance, and operating instructions. A different style is only a candidate if the trailer’s hardware matches; do not rely on capacity alone to establish fit.
What should I consider if the jack’s electric power is unavailable?
Check whether the product includes a manual crank or is designed to operate with another power source, such as a compatible cordless drill. Confirm the required equipment and operating procedure in the listing or manufacturer’s instructions before relying on it. Do not assume every electric jack has a manual backup or interchangeable power options.
Final Words
For a compatible A-frame mount and substantial stated capacity, the POLESTAR 7500-pound jack is the strongest all-around listed choice, with dynamic and static ratings, a manual crank, and a waterproof cover. Consider the KYX 7500-pound A-frame option for its stated 12V DC motor and coated carbon steel, or check other mount styles only against your hardware. Verify tongue load, mount fit, clearance, and guidance; no listing confirms dump-trailer approval.

