Best Jack For Dump Trailer: Compare Hydraulic and Weld-On Options

Best Jack For Dump Trailer

A strong dump-trailer jack should match the trailer’s lifting demands and mounting setup, with hydraulic power especially useful when you want push-button operation. The Johnson Trailer Parts Dexter 24,000 lb Hydraulic Trailer Jack Kit leads this group because it combines two 12,000 lb jacks with a double-acting pump and synchronized operation. Other options include 12,000 lb weld-on jacks and a bolt-on hydraulic jack, plus manual and electric tongue jacks for different trailer configurations.

Capacity alone does not establish compatibility: check the jack’s mounting method, required lift range, and whether the product is designed for your trailer’s structure. This guide compares the listed specifications and features so you can narrow the field by how you plan to lift and support your dump trailer.

The Johnson Trailer Parts Dexter 24,000 lb Hydraulic Trailer Jack Kit is the strongest overall match for a dump trailer in this lineup. It includes two 12,000 lb hydraulic jacks, a double-acting electric hydraulic pump, and a flow divider for synchronized operation. That combination directly suits dump, cargo, and gooseneck trailer applications listed for the kit.

If you need a single jack instead, compare the 12,000 lb hydraulic Primary Mover with the 12,000 lb weld-on options, while verifying mounting and capacity requirements for your trailer.

Our Top Picks

Johnson Trailer Parts Dexter Hydraulic KitBest Overall

Johnson Trailer Parts Dexter Hydraulic Kit

The kit is explicitly designed for dump trailers and pairs two 12,000 lb jacks with a double-acting pump and synchronized operation.

View on Amazon
Primary Mover 12K Hydraulic JackBest Single Hydraulic

Primary Mover 12K Hydraulic Jack

This single-jack hydraulic kit lifts up to 12,000 pounds and uses a dual holding valve; it is a useful alternative to a dual-jack system.

View on Amazon
BaVekHak 12,000 lb Weld-On JackBest Weld-On Capacity

BaVekHak 12,000 lb Weld-On Jack

Its 12,000 lb static capacity, 4-inch square tube, and 26 inches of total travel suit buyers seeking substantial weld-on support.

View on Amazon

Compare jack types, capacities, and mounting styles

#ProductLoad CapacityMaterialCompatible with Vehicle TypeBuy
124,000 lbSteelTrailerView on Amazon
212,000 lbAlloy SteelTrailerView on Amazon
312000 lbsAlloy Steel, Cast IronATV, Car, RV, Trailer, UTVView on Amazon
4
FZZD 12,000 lb Direct-Weld Jack4. FZZD 12,000 lb Direct-Weld JackHigh-capacity weld-on support
12000 lbAlloy SteelTrailerView on Amazon
58000 lbAlloy SteelTrailer,Rv,etcView on Amazon
6
VEVOR 8,000 lb Direct-Weld Jack6. VEVOR 8,000 lb Direct-Weld JackEight-thousand-pound welded jack
8E+3 lbCarbon SteelTrailerView on Amazon
7
Kohree 8,000 lb Manual Jack7. Kohree 8,000 lb Manual JackManual support on uneven ground
8000 lbAlloy SteelBoat Trailer, Camping Trailer, Utility TrailerView on Amazon
8
POLESTAR 5,000 lb Electric Jack8. POLESTAR 5,000 lb Electric JackBest Electric Tongue Jack
5000 lbAlloy SteelRV, Trailer, TruckView on Amazon
9
VEVOR 5,000 lb A-Frame Jack9. VEVOR 5,000 lb A-Frame JackA-frame height-range adjustment
5000 lbCarbon SteelTrailerView on Amazon
10
YOMILINK 5,000 lb A-Frame Jack10. YOMILINK 5,000 lb A-Frame JackAdjustable A-frame utility support
5000 lbHigh Carbon SteelRV, Trailers, Travel Trailers, Utility…View on Amazon

Detailed Reviews: Best Jack For Dump Trailer

Johnson Trailer Parts Dexter Hydraulic Kit

#1 · Best Overall

1. Johnson Trailer Parts Dexter Hydraulic Kit

  • Load Capacity: 24,000 lb
  • Material: Steel
  • Compatible with Vehicle Type: Trailer

Best for: Powered dual-jack dump lifting.

Why it ranks #1: The kit is explicitly designed for dump trailers and pairs two 12,000 lb jacks with a double-acting pump and synchronized operation.

Synchronized dual 12,000-pound hydraulic jacks give this Dexter kit a combined 24,000-pound lifting capacity, with push-button electric-hydraulic operation for dump, cargo, and gooseneck trailers. A flow divider distributes fluid to both sides, helping coordinate lifting rather than relying on separate manual cranking.

The KTI double-acting power unit is rated at 2 GPM and up to 3,200 PSI, supporting controlled raise-and-lower operation. Its flow divider sends fluid evenly to the pair of 12,000-pound jacks, a practical setup for synchronized lifting across a trailer. The included hydraulic hoses, power unit, jack covers, and flow-divider assembly make this a multi-component hydraulic installation, not a standalone tongue jack. The kit is specifically presented for dump, cargo, and gooseneck trailer applications.

Pros
  • 24,000-pound combined lifting capacity
  • Two 12,000-pound hydraulic jacks
  • Push-button double-acting raise and lower
  • Flow divider supports synchronized operation
Cons
  • The hydraulic kit requires installation of its power unit and hose system.

Skip it if you need a single manual tongue jack; the TOWKING TK-TJ00701065A is an 8,000-pound weld-on option.

This kit suits dump-trailer owners seeking synchronized, powered lifting from two hydraulic jacks. It is a substantial multi-part hydraulic setup, so confirm the trailer can accommodate its power unit, hoses, and dual-jack installation.

Full product details
BrandJohnson Trailer Parts
ColorBlack
Compatible with Vehicle TypeTrailer
Included Components(1) 15′′ Rubber Strap, (1) Flow Divider Combo 2.5 GPM, (1) 32 oz Johnson Trailer Parts Mug, (1) Hydraulic Power Unit (HPU) Double Acting Pump (Power-Up / Power-Down), (2) 12,000 lb Trailer Jacks with 2′′x 20′′ Hydraulic Cylinder, (2) Jack Covers, (6) 48′′ Hydraulic Hose w/2 Straight #6 JIC Fittings, (1)
Load Capacity24,000 Pounds
ManufacturerPremium Supply
Part Number12K-HTJ
MaterialSteel
Model NumberPJD-12-20-K
Style Namehydraulic

Listed on Amazon as: Dexter 24,000 lb Hydraulic Trailer Jack Kit – Dual 12,000 lb Power Jacks – KTI Double Acting Pump – Electric Hydraulic – for Dump, Cargo & Gooseneck Trailers

View on Amazon
Primary Mover 12K Hydraulic Jack

#2 · Best Single Hydraulic

2. Primary Mover 12K Hydraulic Jack

  • Load Capacity: 12,000 lb
  • Material: Alloy Steel
  • Compatible with Vehicle Type: Trailer

Best for: Bolt-on hydraulic power lifting.

Why it ranks #2: This single-jack hydraulic kit lifts up to 12,000 pounds and uses a dual holding valve; it is a useful alternative to a dual-jack system.

A 12,000-pound rating and double-acting hydraulic system define this Primary Mover power jack kit, providing button-operated lifting without manual cranking. Its bolt-on format offers a non-welded mounting approach for trailer owners who want hydraulic operation and a dual holding valve for stability during use.

The hydraulic system is specified for quick lifting at the touch of a button, changing the workflow from hand cranking to powered operation. A dual holding valve is included to support stability during operation, while the 12,000-pound capacity sets the load ceiling. The product is identified as a bolt-on jack kit and includes a standard add-on kit, so it suits buyers planning a bolted installation. Alloy-steel construction forms the jack, and the kit weighs 60 pounds for handling planning.

Pros
  • 12,000-pound lifting capacity
  • Double-acting hydraulic power
  • Button-operated lifting
  • Bolt-on format with dual holding valve
Cons
  • The 60-pound kit weight is a handling consideration during installation.

Skip it if you need synchronized dual-jack lifting; the Johnson Trailer Parts PJD-12-20-K includes two hydraulic jacks and a flow divider.

This Primary Mover suits dump-trailer owners seeking 12,000-pound hydraulic lifting with a bolt-on installation and holding valve. Plan for handling its 60-pound kit and ensure the trailer mounting arrangement suits the bolt-on format.

Full product details
BrandPrimary Mover
ColorBlack
Compatible with Vehicle TypeTrailer
Included ComponentsStandard adds kit
Item Dimensions36 x 12 x 12 inches
Item Weight60 pounds
Load Capacity12,000 Pounds
ManufacturerPrimary Mover
Part NumberPJC-1-ADS-K
Manufacturer Warranty DescriptionOne year
MaterialAlloy Steel
Model NumberPFJ-1-MB-ADS-K
Style Name12k Jack "Bolt On"

Listed on Amazon as: Hydraulic Trailer Jack (12,000 lb) – Power Jack 12K Double Acting, Lift Trailer Jack Stand Kit (12k Jack Bolt On) PFJ-1-MB-ADS-K

View on Amazon
BaVekHak 12,000 lb Weld-On Jack

#3 · Best Weld-On Capacity

3. BaVekHak 12,000 lb Weld-On Jack

  • Load Capacity: 12000 lbs
  • Material: Alloy Steel, Cast Iron
  • Compatible with Vehicle Type: ATV, Car, RV, Trailer, UTV

Best for: Extended travel for welded frames.

Why it ranks #3: Its 12,000 lb static capacity, 4-inch square tube, and 26 inches of total travel suit buyers seeking substantial weld-on support.

A dual-stage 26-inch travel range distinguishes this BaVekHak jack, combining 12.5 inches of screw travel with a 13.5-inch drop leg. That adjustment gives owners of gooseneck, utility, or equipment trailers more height range for support during loading, parking, and storage.

The 4-inch square outer tube is specified to reduce flex under load, while the 12,000-pound static rating suits heavy trailer support. Its 26-inch total travel comes from screw movement and a separate drop leg, so owners can use coarse adjustment before fine-tuning with the screw. The weld-on design creates a rigid, permanent frame connection; plan for welding rather than quick removal. An ergonomic handle is listed for easier lifting, and the rust-resistant coating supports durability.

Pros
  • 12,000-pound static load rating
  • 26-inch dual-stage total travel
  • 4-inch square outer tube
  • Ergonomic handle and rust-resistant coating
Cons
  • Weld-on installation makes the jack a permanent frame attachment.

Skip it if you want a removable A-frame mount; the VEVOR TJA-3000S+JF-1005H-Z uses an A-frame configuration.

Choose this BaVekHak for a trailer needing 12,000-pound static support and broad height adjustment through screw travel plus a drop leg. Its welded 4-inch tube is a fit for permanent frame mounting, not removable use.

Full product details
BrandBaVekHak
Colorblack
Compatible with Vehicle TypeATV, Car, RV, Trailer, UTV
Included ComponentsTrailer Jack
Item Dimensions26 x 11 x 7 inches
Item Weight25 pounds
Load Capacity12000 lbs
ManufacturerBaVekHak
Part NumberBAJY-TJ-55B
Manufacturer Warranty Description1 year
MaterialAlloy Steel, Cast Iron
Model NumberBAJY-TJ-55B
Style NameHydraulic

Listed on Amazon as: 12000 LBS Weld-On Trailer Jack, 4" Square Tube, 26" Travel, Front Pull Pin

View on Amazon
FZZD 12,000 lb Direct-Weld Jack

#4

4. FZZD 12,000 lb Direct-Weld Jack

  • Load Capacity: 12000 lb
  • Material: Alloy Steel
  • Compatible with Vehicle Type: Trailer

Best for: High-capacity weld-on support.

Why it ranks #4: This alloy-steel, side-mounted jack offers a listed 12,000 lb capacity and a direct-weld installation, but the supplied data gives no travel range.

A 12,000-pound lifting capacity is the defining feature of this FZZD square direct-weld jack, giving trailer owners a high-capacity option for lifting and supporting a compatible trailer. Its side-mounted, weld-on installation suits buyers who want a permanently attached jack rather than a removable setup.

The 12,000-pound capacity makes this jack the highest-capacity single-jack manual-style option in this group, while the side-mounted weld-on configuration gives it a direct attachment point on the trailer. Alloy-steel construction provides the material basis for its heavy-duty use. Installation requires welding, so it is a better match for owners equipped to make a permanent frame attachment than for buyers seeking a clamp-on or bolt-on installation. Its 52.6-pound weight also matters when planning handling and mounting.

Pros
  • 12,000-pound lifting capacity
  • Side-mounted, weld-on installation
  • Square direct-weld jack format
  • Alloy-steel construction
Cons
  • Weld-on mounting requires a permanent welded attachment.

Skip it if you need a removable clamp-on jack; the YOMILINK YM-TJS-5K uses an A-frame format instead.

This FZZD suits dump-trailer owners seeking a 12,000-pound jack and able to weld a side mount to the frame. Its permanent installation and 52.6-pound weight make mounting access and handling important considerations.

Full product details
BrandFZZD
Color12000 lbs
Compatible with Vehicle TypeTrailer
Item Dimensions8.5 x 7.9 x 53.3 inches
Item Weight52.6 pounds
Load Capacity12000 pounds
ManufacturerFZZD
Part NumberHZ-FT-01
MaterialAlloy Steel
Model NumberHZ-FT-01
Style NameTongue Jack

Listed on Amazon as: 12000lbs Heavy Duty Trailer Jack,Square Direct Weld

View on Amazon
TOWKING 8,000 lb Pipe-Mount Jack

#5 · Best 8,000 lb Travel

5. TOWKING 8,000 lb Pipe-Mount Jack

  • Load Capacity: 8000 lb
  • Material: Alloy Steel
  • Compatible with Vehicle Type: Trailer,Rv,etc

Best for: Adjustable welded tongue support.

Why it ranks #5: The weld-on 3-inch tube and 8,000 lb capacity fit heavy-duty trailer use; its 15-inch lift plus 12-inch adjustable drop leg adds range.

The TOWKING jack pairs 15 inches of screw travel with a 12-inch adjustable drop leg, giving its 8,000-pound-rated support a broad adjustment range for varying trailer heights. Its 3-inch weld tube makes this a permanent-attachment choice for buyers setting up a compatible trailer tongue.

The listed range runs from 24.5 inches retracted to 39.5 inches extended, with the adjustable drop leg adding coarse height adjustment. That combination helps accommodate different trailer heights without relying on screw travel alone. A 3-inch weld tube provides the attachment interface, so installation involves welding the jack to the trailer. High-strength alloy steel and a powder-coated finish are specified, with the finish supporting resistance to weather and rust during outdoor trailer use.

Pros
  • 8,000-pound load capacity
  • 15-inch screw travel and 12-inch drop leg
  • 3-inch weld tube for permanent attachment
  • Powder-coated, corrosion-resistant steel
Cons
  • Weld-on mounting requires welding to the trailer.

Skip it if you need powered lifting for a dump trailer; the Johnson Trailer Parts PJD-12-20-K offers push-button hydraulic operation.

This TOWKING fits owners who want an 8,000-pound weld-on jack with screw and drop-leg adjustment for varied trailer heights. Account for the permanent welded mount and its specified height range when planning installation.

Full product details
BrandTOWKING
ColorBlack
Compatible with Vehicle TypeTrailer,Rv,etc
Included ComponentsTrailer Jack*1, Drop Leg*1, User Manual*1
Item Dimensions26 x 11 x 8 inches
Item Weight28 pounds
Load Capacity8000 Pounds
ManufacturerTOWKING
Part NumberTK-TJ00701065A
Manufacturer Warranty Description1 Year Manufacturer
MaterialAlloy Steel
Model NumberTK-TJ00701065A

Listed on Amazon as: 8000lbs Pipe Mount Tongue Jack, 15" Lift, Heavy Duty Trailer Jack

View on Amazon
VEVOR 8,000 lb Direct-Weld Jack

#6

6. VEVOR 8,000 lb Direct-Weld Jack

  • Load Capacity: 8E+3 lb
  • Material: Carbon Steel
  • Compatible with Vehicle Type: Trailer

Best for: Eight-thousand-pound welded jack.

Why it ranks #6: This direct-weld carbon-steel jack is rated for 8,000 pounds and includes a crank handle, making it a manual alternative for welded mounting.

An 8,000-pound lifting capacity paired with direct-weld installation makes this VEVOR jack a heavy-duty choice for owners setting up a permanent trailer-frame mount. It includes a crank handle and adjustable drop leg, giving manual operation and height adjustment for high- or low-profile trailers.

The direct-weld attachment provides a permanent mounting approach, and the included installation parts support that setup. Its 15-1/4-inch lift and adjustable drop leg address different trailer heights, while the 8,000-pound rating defines the lifting limit. Carbon-steel construction suits the jack’s heavy-duty role. Because this is a manual jack with a crank handle, operation involves turning the handle rather than push-button hydraulic lifting; buyers should plan around that workflow and a welded installation.

Pros
  • 8,000-pound lifting capacity
  • 15-1/4-inch lift with adjustable drop leg
  • Direct-weld trailer installation
  • Crank handle and manual included
Cons
  • Manual cranking is required rather than powered lifting.

Skip it if you want synchronized powered lifting for a dump trailer; the Johnson Trailer Parts PJD-12-20-K has dual electric-hydraulic jacks.

This VEVOR suits owners needing an 8,000-pound manual jack for a permanent welded mount and varied trailer heights. Its crank operation and direct-weld installation are key considerations for anyone planning the trailer’s lifting workflow.

Full product details
BrandVEVOR
ColorBlack
Compatible with Vehicle TypeTrailer
Included Components1 x Trailer Jack 1 x Crank Handle 1 x Manual
Item Dimensions8 x 8 x 24.88 inches
Item Weight23.4 pounds
Load Capacity8E+3 pounds
ManufacturerVEVOR
Part NumberTrailer Jack 8000 lbs
MaterialCarbon Steel
Model NumberTJD-7000S
Style Name8000LBS

Listed on Amazon as: VEVOR 8000lbs Heavy-Duty Square Direct Weld on RV Jack, 15-1/4 Inches Lift, Adjustable Drop Leg, for Lifting RV, Horse, Utility, Yacht Trailers, TJD-7000S

View on Amazon
Kohree 8,000 lb Manual Jack

#7

7. Kohree 8,000 lb Manual Jack

  • Load Capacity: 8000 lb
  • Material: Alloy Steel
  • Compatible with Vehicle Type: Boat Trailer, Camping Trailer, Utility Trailer

Best for: Manual support on uneven ground.

Why it ranks #7: Its 8,000 lb capacity, galvanized tubes, and adjustable drop leg provide manual support for utility trailers, though dump-trailer fit is not specified.

An oversized foot plate and galvanized, thickened tubes distinguish the Kohree manual jack for owners supporting trailers on rough or uneven ground. Its 8,000-pound capacity and adjustable drop leg pair with a detachable extended side handle, offering manual height adjustment for boat, camping, and utility trailers.

The oversized foot plate provides a broader base on uneven ground, while the reinforced inner gear and thickened galvanized tubes are specified as part of its heavy-duty construction. Its 8,000-pound rating sets the lifting limit for compatible trailers. The detachable extended side handle has a non-slip rubber texture and is described as reducing cranking effort by up to 30%, so operation remains manual but is intended to require less effort. An adjustable drop leg adds height flexibility.

Pros
  • 8,000-pound load capacity
  • Oversized foot plate for uneven ground
  • Galvanized thickened tubes and reinforced inner gear
  • Detachable extended handle with non-slip grip
Cons
  • Manual cranking remains necessary for raising and lowering.

Skip it if you want push-button lifting instead of manual cranking; the POLESTAR 10201091 is an electric A-frame jack.

This Kohree suits owners of compatible utility, camping, or boat trailers who need manual support on uneven ground. Its 8,000-pound rating and adjustable drop leg matter, but powered lifting is outside its manual operation.

Full product details
BrandKohree
ColorBlack
Compatible with Vehicle TypeBoat Trailer, Camping Trailer, Utility Trailer
Included ComponentsScrew accessories, Trailer jack x1
Item Dimensions26 x 8 x 6 inches
Item Weight28 pounds
Load Capacity8000 Pounds
ManufacturerKohree
Part NumberKR1289-KO-US-FBA
Manufacturer Warranty DescriptionKohree Service
MaterialAlloy Steel
Model NumberKR1289

Listed on Amazon as: Kohree 8000 lbs Manual Trailer Jack, Heavy Duty, Adjustable Drop Leg

View on Amazon
POLESTAR 5,000 lb Electric Jack

#8 · Best Electric Tongue Jack

8. POLESTAR 5,000 lb Electric Jack

  • Load Capacity: 5000 lb
  • Material: Alloy Steel
  • Compatible with Vehicle Type: RV, Trailer, Truck

Best for: Electric A-frame tongue lifting.

Why it ranks #8: Electric operation avoids manual cranking, with a 5,000 lb dynamic rating and 7,500 lb static lifting power, but it is an A-frame tongue jack.

Electric operation is the central draw of this POLESTAR A-frame jack, letting owners raise or lower a compatible trailer without relying solely on hand cranking. It supports a 5,000-pound dynamic load and lists 7,500 pounds of static lifting power, with a crank and waterproof cover included.

The 5,000-pound dynamic rating is the relevant limit for lifting a moving load, while the listed 7,500-pound static lifting power describes its static capacity. Its electric tongue-jack format offers a powered alternative to repeated manual cranking for trailer, RV, and boat owners. Alloy-steel construction forms the jack body, and the included crank provides a manual operating component. The included waterproof cover offers a cover for the jack when it is not in use.

Pros
  • Electric A-frame jack operation
  • 5,000-pound dynamic load rating
  • 7,500-pound static lifting power
  • Includes crank and waterproof cover
Cons
  • The dynamic load rating is limited to 5,000 pounds.

Skip it if your required dynamic lifting load exceeds 5,000 pounds; the VEVOR TJD-7000S is rated for 8,000 pounds.

This POLESTAR fits owners who want electric A-frame tongue lifting for a compatible trailer, RV, or boat. Keep the 5,000-pound dynamic limit distinct from its 7,500-pound static figure when assessing dump-trailer needs.

Full product details
BrandPOLESTAR
ColorBlack
Compatible with Vehicle TypeRV, Trailer, Truck
Included ComponentsCrank, Electric Trailer Jack, Waterproof Cover
Item Dimensions7.28 x 9.84 x 32.28 inches
Item Weight21.7 pounds
Load Capacity5000 Pound
ManufacturerPOLESTAR
Part Number10201091
Manufacturer Warranty Description1 Year Warranty
MaterialAlloy Steel
Model Number10201091
Style NameElectric Trailer Jack

Listed on Amazon as: POLESTAR Electric Trailer Jack, 5000lbs Electric Power A-Frame Tongue Jack

View on Amazon
VEVOR 5,000 lb A-Frame Jack

#9

9. VEVOR 5,000 lb A-Frame Jack

  • Load Capacity: 5000 lb
  • Material: Carbon Steel
  • Compatible with Vehicle Type: Trailer

Best for: A-frame height-range adjustment.

Why it ranks #9: The 5,000 lb capacity and 9.8–32.5 inch working range offer adjustment, but its A-frame mounting is less directly suited to dump-trailer lifting.

A 15-inch screw travel combined with a five-position drop leg gives this VEVOR A-frame jack a 9.8-to-32.5-inch working lift range. That range helps owners adjust trailer tongue height in coarse and fine steps, provided the trailer uses an A-frame mount and stays within its 5,000-pound rating.

The screw portion covers 9.8 to 24.8 inches, while the drop leg adds 7.7 inches of coarse adjustment for the stated total working range. This two-step setup can reduce the amount of cranking needed for larger height changes, with the screw available for finer positioning. The jack is rated for tongue weight up to 5,000 pounds and is listed for utility, boat, RV, horse, and camper trailers. Its A-frame format defines the mounting fit.

Pros
  • 5,000-pound tongue-weight rating
  • 15-inch screw travel
  • Five-position drop leg adds 7.7 inches
  • 9.8-to-32.5-inch working lift range
Cons
  • Its 5,000-pound tongue-weight rating may not suit heavier dump trailers.

Skip it if your trailer tongue exceeds 5,000 pounds; the FZZD HZ-FT-01 is rated for 12,000 pounds and uses a weld-on mount.

This VEVOR fits dump-trailer owners with an A-frame mount and tongue weight within 5,000 pounds who value staged height adjustment. The listed working range and mounting style are important fit boundaries.

Full product details
BrandVEVOR
Colorsilver" or "gray
Compatible with Vehicle TypeTrailer
Included Components1 x Trailer Jack 1 x Crank Handle 1 x Manual
Item Dimensions25 x 6 x 6 inches
Item Weight5 kg
Load Capacity5000 Pounds
ManufacturerVEVOR
Part NumberTrailer Jack 5000 lb
MaterialCarbon Steel
Model NumberTJA-3000S+JF-1005H-Z
Style Name5000LBS

Listed on Amazon as: VEVOR 5000lbs A-Frame Trailer Jack, 15" Vertical Travel, lift 9.8-32.5"

View on Amazon
YOMILINK 5,000 lb A-Frame Jack

#10

10. YOMILINK 5,000 lb A-Frame Jack

  • Load Capacity: 5000 lb
  • Material: High Carbon Steel
  • Compatible with Vehicle Type: RV, Trailers, Travel Trailers, Utility…

Best for: Adjustable A-frame utility support.

Why it ranks #10: This 5,000 lb A-frame jack has a 15-inch lift and adjustable drop leg, but the listed tongue-jack style is the least direct dump-trailer fit.

Five-level height adjustment distinguishes this YOMILINK A-frame jack, letting owners set trailer height across a listed range of 23.2 to 45.6 inches. Its 5,000-pound capacity and broad vehicle compatibility make it an option for lighter dump-trailer tongue support where an A-frame mount fits.

The five-position adjustment helps tailor the jack height to a trailer, while the stated 23.2-to-45.6-inch range provides a useful reference for checking the required setup. High-carbon steel forms the jack body, and a clear zinc coating is specified to withstand at least 100 hours in salt-spray corrosion environments. The A-frame format is suited to trailers with that mounting arrangement, rather than a welded side-mount frame. Its 5,000-pound rating sets the load boundary.

Pros
  • 5,000-pound lifting capacity
  • Five-level height adjustment
  • 23.2-to-45.6-inch listed height range
  • Clear zinc coating tested to 100 hours salt spray
Cons
  • The 5,000-pound capacity limits it to lighter tongue-support needs.

Skip it if you need more than 5,000 pounds of capacity; the VEVOR TJD-7000S is rated for 8,000 pounds.

This YOMILINK is for dump-trailer owners with an A-frame mount and tongue-support needs within its 5,000-pound rating. Check the listed height range against the trailer; its adjustment cannot offset a capacity mismatch.

Full product details
BrandYOMILINK
ColorBlack
Compatible with Vehicle TypeRV, Trailers, Travel Trailers, Utility Trailers, Campers, Fifth Wheels, Boat Trailers, Marine Trailers, Jet Ski Trailers
Included ComponentsComes with housing
Item Dimensions23 x 5.5 x 5.5 inches
Item Weight14 pounds
Load Capacity5000 pounds
ManufacturerYOMILINK
Part NumberYM-TJS-5K
Manufacturer Warranty DescriptionNoWarningApplicable
MaterialHigh Carbon Steel
Model NumberYM-TJS-5K
Style NameTongue Jack

Listed on Amazon as: 5000 lbs A-Frame Trailer Jack, 15" Lift, Adjustable Drop Leg

View on Amazon

Avoid Mounting-Style Mismatch

A jack with adequate capacity can still be the wrong choice if its mounting style does not match the trailer. The Johnson Trailer Parts Dexter Hydraulic Kit is a dual hydraulic system, while the Primary Mover 12K Hydraulic Jack is described as a bolt-on jack. BaVekHak, FZZD, TOWKING, and VEVOR 8,000 lb Direct-Weld are weld-on or direct-weld options.

By contrast, the POLESTAR, VEVOR 5,000 lb A-Frame, and YOMILINK are tongue or A-frame jacks. These categories are not automatically interchangeable.

Before choosing, identify the trailer’s existing attachment point and confirm that the proposed jack can be installed there. Weld-on products also imply a permanent attachment method; the supplied listings do not establish whether a particular trailer frame is suitable for welding. If attachment compatibility is uncertain, resolve it before treating capacity as the deciding factor.

Account for Lift Range and Travel

A jack’s stated lifting capacity does not tell you whether its travel will reach your trailer’s needed height. The BaVekHak lists 26 inches of total travel, while the TOWKING describes 15 inches of lift plus a 12-inch adjustable drop leg. The VEVOR 5,000 lb A-Frame gives a 9.8–32.5 inch working range, and YOMILINK lists height adjustment from 23.2 to 45.6 inches.

Those figures describe different products and should not be compared as though every measurement means the same thing. Measure the trailer’s relevant height and check which figures represent screw travel, drop-leg adjustment, or total working range.

A mismatch can leave too little clearance or fail to provide the required lift even when the capacity number looks sufficient. The supplied listings do not establish safe operating height for every trailer configuration.

How to Choose a Dump-Trailer Jack

Capacity and Jack Configuration

Look for a rated capacity and configuration appropriate to the trailer’s lifting requirements, not just a large number. The products range from 5,000 lb tongue jacks to 12,000 lb single jacks, while the Johnson Trailer Parts Dexter Hydraulic Kit pairs two 12,000 lb jacks for a listed 24,000 lb lifting capacity. The BaVekHak is rated for a 12,000 lb static load, and POLESTAR lists both 5,000 lb dynamic capacity and 7,500 lb static lifting power.

These ratings describe different setups, so do not assume they mean the same thing. Buyers seeking powered dual support should consider the Johnson kit; those matching a single-jack installation can compare the 12,000 lb models.

Confirm the load requirement for your trailer before selecting.

Mounting Style

Choose a jack whose mounting method matches the trailer’s structure and intended installation. The set includes weld-on options: BaVekHak has a 4-inch square tube, TOWKING a 3-inch weld tube, and FZZD and VEVOR 8,000 lb Direct-Weld describe welded mounting. Primary Mover lists a 12,000 lb bolt-on jack, while the POLESTAR, VEVOR 5,000 lb A-Frame, and YOMILINK use tongue or A-frame configurations.

These styles are not interchangeable based on capacity alone. A buyer replacing a compatible welded jack may favor a weld-on model; someone with an existing bolt-on setup can investigate the Primary Mover.

A-frame jacks suit trailers with the appropriate tongue arrangement, but their listed style does not make them a direct replacement for every dump-trailer frame.

Power and Lift Adjustment

Decide whether you want hydraulic, electric, or manual operation, and check the available adjustment range. The Johnson Trailer Parts Dexter Hydraulic Kit and Primary Mover use hydraulic power; POLESTAR is an electric tongue jack, while several other listed models are manually operated. For adjustment, BaVekHak lists 26 inches of dual-stage travel, TOWKING has a 12-inch drop leg in addition to screw lift, and VEVOR 5,000 lb A-Frame gives a 9.8–32.5 inch working range.

Powered lifting can suit buyers seeking push-button operation; manual models may better match installations where a crank is acceptable. Choose based on the actual height you need to reach and verify that the listed travel measurement applies to your setup.

Which Jack Fits Your Dump Trailer?

For a dump trailer needing a coordinated, powered setup, choose the Johnson Trailer Parts Dexter Hydraulic Kit: its two 12,000 lb jacks and synchronized double-acting pump make it the most directly specified match. If your installation calls for one hydraulic jack, consider the Primary Mover 12K Hydraulic Jack, which has a 12,000 lb capacity and bolt-on style. For a permanent weld-on option, the BaVekHak 12,000 lb Weld-On Jack combines a 12,000 lb static rating with a 4-inch square tube and 26 inches of travel.

Buyers needing a lower listed capacity can compare the TOWKING 8,000 lb Pipe-Mount Jack and VEVOR 8,000 lb Direct-Weld Jack. Choose an A-frame or tongue jack only when that mounting arrangement fits your trailer; verify capacity and fit before installation.

Frequently Asked Questions

How do I calculate the jack capacity needed for my loaded dump trailer?

Start with the loaded trailer’s weight and determine how much of that weight the jack or jacks will actually support. Do not assume the jack carries the entire trailer load or divide it evenly without confirming the setup. Check the trailer and jack requirements, account for the intended support arrangement, and choose capacity that meets those requirements.

Where should a dump-trailer jack attach to the frame?

Attach a jack only at a structural point approved for that jack and trailer, using a mounting style that fits the frame. A direct-weld, pipe-mount, bolt-on, or tongue jack requires a compatible attachment location. Consult the trailer and jack instructions or a qualified installer; do not mount to an unsupported frame section.

Can I leave a trailer jack supporting a loaded dump trailer during maintenance?

Do not rely on a trailer jack alone to support a loaded trailer during maintenance. Use appropriately rated, stable support equipment at approved points, secure the trailer against movement, and follow the trailer manufacturer’s instructions. Keep clear of raised dump bodies and other suspended loads; a jack’s listed capacity does not establish a safe maintenance procedure.

Should I choose a hydraulic jack kit or a single jack?

Choose based on the trailer’s required support arrangement and mounting compatibility. The listed Dexter kit includes two 12,000 lb hydraulic jacks, an electric double-acting pump, and a flow divider for synchronized operation. For a single-jack installation, compare the listed 12,000 lb hydraulic options and verify capacity, attachment, and fit before choosing.

What should I check before choosing a weld-on, pipe-mount, or tongue jack?

Confirm that the jack’s mounting style matches the trailer’s frame and intended attachment point, then verify its capacity against the required support load. Compare the listed travel or lift only when it is provided and relevant to your setup. If fit or installation is uncertain, consult the trailer or jack instructions or a qualified installer.

Final Words

For a dump trailer needing a coordinated powered setup, the Dexter kit is the strongest match in this lineup: it pairs two 12,000 lb jacks with a synchronized double-acting pump. For a single hydraulic jack, compare the Primary Mover 12K with the weld-on options. Consider the listed 8,000 lb choices when their capacity and mounting fit your trailer.

Verify the required load capacity and attachment arrangement before installation.

Leave a Reply

Your email address will not be published. Required fields are marked *