Best Usa Made Floor Jack: Compare 10 Lifting Options

#1 · Best Overall

1. American Lifting AL2301

• Load Capacity: 3 tons
• Material: Alloy Steel
• Compatible with Vehicle Type: Car, Truck

Best for: Heavy-duty shop and garage lifting.

Why it ranks #1: Its 3-ton rating, 5-to-22-7/8-inch lift range, cast-iron lift arm, and heavy-gauge construction suit regular garage and truck work.

A 22-7/8-inch maximum lift gives the American Lifting AL2301 extra reach for service work on cars, trucks, and SUVs. Its rapid-lift feature advances unloaded positioning in approximately 1/4- to 3/4-inch increments, while a 3-ton rating and heavy-gauge construction support demanding garage use.

The rapid-lift function moves the saddle toward a jacking point in small, stated increments when there is no load, helping reduce the effort needed to position it before lifting. A 5-inch minimum and 22-7/8-inch maximum define its working range for cars and trucks. The large 6-3/4-inch swivel saddle provides a broad contact surface, while the cast-iron lift arm and flanged side plates add rigidity. At 116 pounds, this is best kept in a shop location rather than carried around.

Skip it if you need to reach beneath a lowered car; the SATA 3TSteel starts at 2-11/16 inches.

This American Lifting jack fits a fixed garage or shop handling cars, trucks, or SUVs where maximum height and rapid unloaded positioning matter. Its 116-pound weight is a practical limit for anyone needing frequent relocation.

Listed on Amazon as: AL2301 Floor Jack 3 Ton – Professional Heavy Duty Hydraulic Rapid Lift Floor Jack for Service Car Truck SUV, Red

#2 · Best Aluminum Mix

2. Jack Boss 3-Ton Low-Profile

• Load Capacity: 3 tons
• Material: Aluminum
• Compatible with Vehicle Type: Bus, Trailer

Best for: Low-clearance sedan and SUV owners.

Why it ranks #2: The 3-ton aluminum-and-steel build has a 3-15/16-inch minimum and 18-5/16-inch maximum lift, plus a rubber saddle and two-piece handle.

A 3-15/16-inch minimum height lets the Jack Boss reach vehicles with limited ground clearance, while its 18-5/16-inch maximum gives useful lifting range. The 3-ton aluminum-and-steel jack pairs a dual-piston quick-lift pump with a rubber saddle for routine vehicle maintenance across several vehicle types.

Its 3-ton capacity and stated compatibility with sedans, SUVs, MPVs, station wagons, travel trailers, and minivans cover a broad set of home-garage jobs. The low starting height can help when positioning beneath a low vehicle, and the dual-piston pump supports quicker lifting. A rubber saddle and two-piece handle are included, bringing vehicle-contact protection and a handle that separates for storage. At 58.5 pounds, however, moving it around the garage takes some effort.

Skip it if you need a 3-inch entry height; the LiftMaster 6490 starts lower and has a stated 20-inch maximum lift.

Choose this Jack Boss for garage work on low-clearance cars, SUVs, and listed recreational vehicles when a low entry height and broad compatibility matter. Its 3-ton rating is the boundary; the jack weighs 58.5 pounds to move.

Listed on Amazon as: Jack Boss 3 Ton Low Profile, Aluminum and Steel Racing Floor Jack with Dual Pistons Quick Lift Pump, 1.5X Overload Tested for Safety, Sport Utility Vehicle, Lifting Range 3-15/16" min to 18-5/16" max

#3 · Lowest Entry Height

3. SATA 3-Ton Steel Floor Jack

• Load Capacity: 3 T
• Compatible with Vehicle Type: Car

Best for: Ultra-low-clearance car owners.

Why it ranks #3: Its listed 2-11/16-inch entry height is the lowest specified here, and it combines a 3-ton capacity with a dual-piston pump.

A 2-11/16-inch starting height lets the SATA 3TSteel target vehicles with exceptionally limited clearance. The 3-ton steel jack pairs that ultra-low profile with a dual-piston quick-lift pump, and its stated 1.5-times overload test provides a specific load-testing detail for home or professional users.

The low entry height is useful when a standard jack cannot reach beneath a car, while the 3-ton rating sets its stated working capacity at 6,600 pounds. Its dual-piston quick-lift pump supports a more efficient lifting workflow, and thickened steel construction is described as resisting deformation under pressure. Each unit is stated to be tested to 4.5 tons, or 9,900 pounds, before leaving the factory. The listed vehicle compatibility is cars, making its stated application relatively focused.

Skip it if you need a jack explicitly listed for trucks and SUVs; the LiftMaster 6490 lists both and reaches 20 inches.

Pick the SATA for car work where a very low entry point and a stated overload test matter. Its 3-ton rating and car-only listed compatibility define the fit; look elsewhere if your work requires broader vehicle coverage.

Listed on Amazon as: SATA 3-Ton (6,600 lb) Heavy-Duty Steel Floor Jack Ultra-Low Profile Design (2-11/16” Height) with Dual-Piston Quick Lift Pump, Tested for 1.5X Overload for Ultimate Safety

#4 · Best Maximum Lift

4. LiftMaster 3-Ton Floor Jack

• Load Capacity: 3 tons
• Material: Steel
• Compatible with Vehicle Type: Car, RV, Sport Utility Vehicle, Tractor…

Best for: Lowered-car garage mechanics.

Why it ranks #4: This steel 3-ton jack starts at 3 inches and reaches 20 inches, a useful stated range for lowered cars and elevated SUVs.

A 3-inch entry point helps the LiftMaster 6490 slide beneath lowered vehicles, while its 20-inch maximum height reaches elevated chassis. The 3-ton steel floor jack combines a dual-pump system with a two-piece knurled handle, supporting efficient lifting and a secure grip during garage work.

The dual-pump system is specified to save effort while pumping, which can make repeated lifting less demanding. Its 3-inch low profile suits road-legal cars with limited clearance, and the stated 20-inch maximum height extends its reach to larger SUVs or vehicles with elevated chassis. A foam bumper on the two-piece handle helps prevent vehicle damage, while the strengthened rubber pad adds protection and friction at the lifting point. Steel construction contributes to a substantial 33-kilogram package.

Skip it if you prioritize a much lighter jack for carrying; the Hi-Lift Patriot PAT605 weighs 31.2 pounds and is rated for trucks.

The LiftMaster suits mechanics working on lowered cars as well as SUVs needing extra lift height. Its 3-ton capacity and 20-inch reach are useful boundaries to consider, and its 33-kilogram weight makes it less convenient to reposition.

Listed on Amazon as: LiftMaster 3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack with Quick Lift

#5

5. AV Steel 3-Ton Low-Profile

• Load Capacity: 6600 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Low-slung car maintenance.

Why it ranks #5: The 3-ton rating and 3-1/8-to-19-7/8-inch range make it a versatile low-profile option for buyers seeking substantial lift height.

A 3-1/8-inch minimum height helps the AV Steel jack fit beneath many low-riding vehicles, with a maximum lift of 19-7/8 inches. Its 3-ton, 6,600-pound capacity and dual-piston quick-lift pump combine low-clearance access with a substantial stated working range for car maintenance.

The 3-1/8-inch starting height is useful for positioning beneath a low-slung car, while the 19-7/8-inch maximum provides room to raise the vehicle for service. A 3-ton capacity sets the stated load limit at 6,600 pounds. The dual-piston quick-lift pump supports a more efficient pumping workflow, and the alloy-steel construction specifies the frame material. The jack measures 29-1/8 by 13-3/4 by 5-7/8 inches according to the feature text, useful dimensions to consider for garage storage.

Skip it if you need listed compatibility with trucks and SUVs; the YELLOW JACKET AS332HN names both vehicle types and has a 5-ton capacity.

The AV Steel suits car owners seeking low-clearance access, dual-piston pumping, and a clearly stated 19-7/8-inch maximum. Its listed compatibility is for cars, so buyers with other vehicle types should weigh that boundary.

Listed on Amazon as: AV Steel Low Profile Floor Jack 3 Ton (6600 lbs), Heavy Duty Hydraulic Jack for Car, Heavy-Duty Floor Jack with Dual Pistons Quick Lift Pump, Car Floor Jack with Lifting Range 3-1/8'' to 19-7/8''

#6 · Highest Listed Capacity

6. YELLOW JACKET 5-Ton Floor Jack

• Load Capacity: 5 Tons
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Heavy vehicle lifting capacity.

Why it ranks #6: Its 5-ton, 10,000-pound capacity exceeds the 3-ton options, making it the listed choice for buyers whose vehicle needs that rating.

A 5-ton, 10,000-pound rating gives the YELLOW JACKET floor jack a higher stated capacity than common 3-ton options. Its low-profile hydraulic design is paired with alloy-steel construction, positioning it for buyers who need substantial lifting capacity across cars, trucks, SUVs, and other large automotive models.

The 5-ton rating is the defining reason to consider this jack for heavier lifting needs, and the listing names cars, trucks, SUVs, and other large automotive models as applications. Its low-profile design addresses access under vehicles, while hydraulic operation supplies the lifting method. Alloy steel identifies the main material, and the package includes the floor jack. The supplied facts do not give a minimum or maximum height, so buyers cannot determine precise clearance or peak lift from the listing details alone.

Skip it if you need a documented lift range before choosing; the American Lifting AL2301 specifies a 5-to-22-7/8-inch range.

Choose this YELLOW JACKET for lifting needs that call for its stated 5-ton capacity across listed vehicle types. Its low-profile form is relevant, but the missing height specifications leave exact clearance and maximum reach unclear.

Listed on Amazon as: 5 Ton Hydraulic Low Profile Floor Jack, Grey

#7

7. Maxority 5-Ton Low-Profile

• Load Capacity: 11000 lb
• Material: Steel
• Compatible with Vehicle Type: Car

Best for: Heavy-duty vehicle maintenance.

Why it ranks #7: The 11,000-pound capacity is the highest listed, but the supplied data gives no lift-height figures and only a 90-day warranty.

An 11,000-pound, 5-ton rating makes the Maxority MAX1901-35X the higher-capacity option in this lineup. Its steel construction and dual-piston quick-lift pump support heavy-duty vehicle maintenance, while the listing identifies cars, trucks, and SUVs as intended applications for home and workshop use.

The 5-ton capacity is the primary consideration for buyers lifting heavier vehicles, with the listing specifying an 11,000-pound limit. A dual-piston quick-lift system reduces pumping effort and supports faster lifting, according to the supplied features. Steel construction provides the stated frame material, and the product is described for cars, trucks, SUVs, and more. At 100 pounds, it is substantial to reposition, so a fixed workshop spot may be more practical than moving it between jobs.

Skip it if you want a lighter jack for carrying around the garage; the Hi-Lift Patriot PAT605 weighs 31.2 pounds and is listed for trucks.

The Maxority fits workshop users lifting cars, trucks, or SUVs who need a 5-ton rating and dual-piston pumping. Its 100-pound weight makes frequent relocation a consideration, so plan where it will live in the workspace.

Listed on Amazon as: 5-Ton (11000lbs) Low Profile Hydraulic Super Heavy-Duty Steel Floor Jack with Dual Pistons Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles (Red, 5 Ton Low Profile)

#8

8. Maxority 3-Ton Low-Profile

• Load Capacity: 6600 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Lowered-car home mechanics.

Why it ranks #8: Its 6,600-pound rating and extended-reach, low-profile design suit low-clearance cars, though exact lift heights are not supplied.

Extended reach paired with a low-profile design helps the Maxority 3-ton jack access sports cars, lowered vehicles, and cars with aftermarket modifications. Its steel hydraulic construction and dual-piston quick-lift pump make it a candidate for home or workshop maintenance when underbody clearance is a concern.

The product information emphasizes long reach and an ultra-low profile, linking access to vehicles with minimal ground clearance to a wider reach beneath them. That combination can help with positioning on lowered cars and vehicles with modifications. A dual-piston quick-lift pump is listed, supporting faster lifting workflow, and the 6,600-pound capacity establishes the load rating. The supplied details do not state a specific minimum or maximum height, so buyers cannot use them to verify exact clearance or lift range.

Skip it if you need a stated minimum height to check clearance; the AV Steel AV-300102F lists a 3-1/8-inch starting height.

The Maxority suits home mechanics who need extended reach and low-profile access for cars, especially lowered or modified vehicles. Its 3-ton rating is clear, but the supplied specifications do not give exact lift-height limits.

Listed on Amazon as: 3-Ton (6600lbs) Low Profile Hydraulic Heavy-Duty Steel Floor Jack with Dual Pistons Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles (Random Color, 3 Ton Low Profile)

#9

9. VEVOR 2.5-Ton Floor Jack

• Load Capacity: 2.5 tons
• Material: Steel
• Compatible with Vehicle Type: Truck

Best for: Compact weekend DIY lifting.

Why it ranks #9: The 2.5-ton capacity and 3.35-to-14.96-inch range cover many family vehicles, but its rating is below most listed hydraulic jacks.

At 22.2 inches long and rated for 2.5 tons, the VEVOR S385 offers a compact steel floor-jack option for home maintenance. Its 3.35-inch minimum and 14.96-inch maximum height cover a defined range for family cars, trucks, and SUVs, while a single-piston pump keeps the lifting setup straightforward.

The stated 2.5-ton capacity supports jobs such as tire changes, oil changes, and brake maintenance, with the product listing family cars, trucks, and SUVs. Its 3.35-inch minimum height provides access beneath some low vehicles, while the 14.96-inch maximum establishes the upper end of its reach. At 22.2 inches long, the jack has a relatively short listed length for storage in a home workspace. The single-piston pump differs from dual-piston models, so the listing does not promise that style of quick-lift system.

Skip it if you need dual-piston quick lifting; the Jack Boss AS830011L has a dual-piston pump and a 3-ton rating.

The VEVOR S385 fits weekend DIYers who want a compact jack for common maintenance on listed cars, trucks, or SUVs. Its 2.5-ton capacity and 14.96-inch maximum height set clear limits for heavier or higher-lift work.

Listed on Amazon as: VEVOR 2.5 Ton Low Profile Heavy-Duty Steel Racing Floor Jack

#10

10. Hi-Lift Patriot Utility Jack

• Load Capacity: 7E+3 lb
• Material: All-Cast Iron
• Compatible with Vehicle Type: Truck

Best for: Truck owners needing utility lifting.

Why it ranks #10: This 7,000-pound cast-iron jack is described as a utility jack, not a conventional rolling floor jack, so it fits the search less directly.

A 60-inch frame and 7,000-pound capacity distinguish the Hi-Lift Patriot as a utility jack for truck owners needing substantial lifting reach. Its all-cast-iron construction and industrial styling suit buyers considering a long-form jack rather than a conventional low-profile garage floor jack.

The 60-inch length gives this jack a very different footprint from a compact garage floor jack, so buyers should plan storage around its extended frame. Its 7,000-pound capacity is specified for truck compatibility, making that combination the relevant fit for truck-focused utility work. The all-cast-iron construction is a defining material choice, while the package lists one floor jack. No lifting range or pump details are supplied, so the available facts do not establish clearance or operating-speed expectations.

Skip it if you need a low-profile garage jack for a lowered car; the AV Steel AV-300102F starts at 3-1/8 inches.

Consider the Hi-Lift Patriot if your work centers on trucks and a 60-inch utility jack suits your workspace. It is not a compact floor-jack choice, and supplied details do not specify a minimum lifting height or pump system.

Listed on Amazon as: Hi-Lift Floor Jack, Hi-Lift Patriot, 60 in Long, 7000 lb Capacity, Cast Iron, Blue/Red/White Powder Coat, Each