Best Motorcycle Phone Charger: Compare USB-A, USB-C and Wireless

#1 · Best Overall

1. EXTRACTME Motorcycle PD/QC Charger

• Input Voltage: 24 V
• Output Voltage: 5 V
• Compatible Devices: Camcorders, Car Recorders, Cellular Phones…

Best for: USB-C PD and QC pairing.

Why it ranks #1: Its 30W USB-C PD and 18W USB-A QC 3.0 ports charge two devices; a voltmeter, on/off switch, and two mounting options add utility.

A 30W USB-C Power Delivery port sits beside an 18W Quick Charge 3.0 USB-A port, giving this EXTRACTME charger two distinct fast-charging connections. Riders can charge two devices simultaneously, while the voltmeter and on/off switch add electrical-system monitoring and a way to cut power when the charger is idle.

The USB-C PD and USB-A QC 3.0 ports let riders connect devices using different charging standards, with the listing describing up to 50% phone charge in 30 minutes. Handlebar and screw mounting provide two installation approaches. A digital voltmeter displays vehicle voltage, and the on/off switch can prevent power drain when the unit is unused. Its rubber cover helps shield the internal circuit from water and dust when closed, making the charging ports easier to protect between rides.

Skip it if you need a second USB-C charging connection rather than USB-A; BRCOVAN M26-A1 pairs USB-C with Qi wireless charging.

Choose this EXTRACTME if you want USB-C PD and USB-A QC charging, voltage monitoring, and switch control in one unit. It offers two mounting methods, but only one of its ports is USB-C.

Listed on Amazon as: EXTRACTME Motorcycle Phone Charger, 6.4A Dual USB Type C PD & Quick Charge 3.0 Motorcycle USB Charger with Voltmeter & ON/Off Switch, Waterproof Motorcycle Accessories for Phone, Tablet, GPS, etc

#2 · Best Wireless Charging Setup

2. BRCOVAN Wireless Charging Mount

• Compatible Devices: Smartphones

Best for: Wireless charging phone mount.

Why it ranks #2: Combines Qi wireless charging up to 15W with a 36W USB-C port, supports simultaneous charging, and has IP66 protection.

Qi wireless charging is integrated into the BRCOVAN phone mount, so compatible phones can charge while held in place without a separate charging cable. A 36W-max USB-C port adds a wired option, and the two charging methods can power devices simultaneously, making this a combined mounting and charging setup for motorcycles.

The holder fits phones measuring 5.4–7.2 inches diagonally, including cases within its stated length, width, and thickness limits. Qi support covers 15W, 10W, 7.5W, and 5W modes, while the USB-C port is rated up to 36W, allowing a second device to charge at the same time. Its IP66 rating supports use in wet conditions, and the independent power switch gives riders a direct way to control the unit. A 59-inch battery cable is included; the input is DC 12–24V.

Skip it if you want only a compact charging socket and no phone cradle; Cliff Top’s 18W USB-C charger mounts on a 10mm mirror.

Pick the BRCOVAN M26-A1 if you want a phone holder with wireless charging and a second wired output. Check the stated phone dimensions, and note that installation requires a DC 12–24V supply.

Listed on Amazon as: BRCOVAN Motorcycle Phone Mount with Qi Wireless & USB-C Charger

#3

3. YONHAN Dual-Port Charger

• Input Voltage: 12 V
• Output Voltage: 5 V
• Compatible Devices: All USB charging mobile phones or other…

Best for: Dual-port charging with switch.

Why it ranks #3: Lists 30W USB-C and 30W USB-A ports plus an LED voltmeter and switch, though its specifications also list a 5W wattage.

YONHAN pairs a USB-C port and a USB-A port, each listed in the feature description at 30W, for riders who want two charging connections on one motorcycle charger. QC 3.0 support and an independent on/off switch add fast-charging capability and a direct way to control power when devices are disconnected.

The USB-C and USB-A ports can serve devices with different cable connections, and the feature description says both can charge devices simultaneously. Its QC 3.0 support and stated 30W-per-port description target riders needing faster charging for phones or GPS units. The independent switch can help prevent power use when charging is unnecessary, while the LED voltmeter feature provides a visible vehicle-voltage reading. The listing specifies 12V input and includes a cable; its specifications also show a 5V output, so output details are not fully consistent across the supplied information.

Skip it if you need consistent stated output specifications before buying; EXTRACTME’s dual USB-A charger lists 24W total output.

YONHAN suits riders who want USB-C and USB-A connections, a switch, and a voltage display. Consider the conflicting output information before relying on its listed wattage for a particular device.

Listed on Amazon as: YONHAN Motorcycle Phone Charger Dual USB Type C PD & QC 3.0

#4

4. Nilight USB-C Voltmeter Charger

• Input Voltage: 12 V
• Output Voltage: 12 V
• Compatible Devices: All equipments with USB and Type C port

Best for: QC 3.0 dual-device charging.

Why it ranks #4: Offers USB-A and USB-C QC 3.0 charging, a voltmeter, and handlebar and screw brackets; its included SAE extension adds installation flexibility.

QC 3.0 support on both USB and Type-C ports lets compatible devices charge together, with listed outputs reaching 12V/2A. Nilight pairs that charging setup with a voltmeter, giving riders a way to check electrical-system voltage while keeping two USB-powered devices connected on a 12V vehicle.

The USB and Type-C ports support QC 3.0, SCP, and FCP charging technologies, with listed output combinations of 5V/3.4A, 9V/2.5A, or 12V/2A. That gives compatible phones and another USB-powered device two charging connections on one mount. The voltmeter adds a visible electrical-system check, while the supplied handlebar and screw brackets offer two installation approaches. Its cover helps shield the ports from rain and dust when closed, and the stated fit includes 7/8-inch grips or other surfaces.

Skip it if you need an integrated phone cradle with wireless charging; BRCOVAN M26-A1 combines a mount and Qi charging.

Choose Nilight if you want two wired charging ports, a voltage display, and mounting options for a 7/8-inch handlebar or another surface. Its fast-charge benefit depends on device compatibility, and the protective caps need closing when parked.

Listed on Amazon as: Nilight 7/8inch Motorcycle Handlebar USB Charger PD Type C Voltmeter 12V

#5

5. EXTRACTME Dual USB QC Charger

• Input Voltage: 12 V
• Output Voltage: 5 V DC
• Compatible Devices: Cellular Phones, GPS, Tablets

Best for: Dual USB-A with voltage display.

Why it ranks #5: Provides dual 24W USB-A QC 3.0 ports, a voltmeter, and an on/off switch, with handlebar or screw mounting and a one-year warranty.

Two Quick Charge 3.0 USB-A ports provide 24W total output, letting this EXTRACTME charger power two devices from one motorcycle installation. Its voltmeter monitors the vehicle’s electrical system, while an on/off switch can save power when the charger is not in use, giving riders both charging and basic power oversight.

The dual-port 24W arrangement supports simultaneous charging for a phone and another compatible device, such as a GPS or tablet. EXTRACTME lists handlebar and screw mounting, providing alternate ways to secure the charger; the handlebar option is specified for 0.75–0.87-inch diameters. A voltage display helps riders monitor the electrical system, and the switch allows the unit to be turned off when parked. The rubber USB cover helps protect the internal circuit from water and dust when closed.

Skip it if you need USB-C Power Delivery alongside USB-A; EXTRACTME’s 6.4A dual-port model lists both PD and Quick Charge 3.0.

This EXTRACTME suits riders charging two USB-A devices who also want a voltage display and an off switch. Its mounting choices are useful, but the handlebar bracket’s stated diameter range is 0.75–0.87 inches.

Listed on Amazon as: EXTRACTME Motorcycle USB Charger, 6.8A Quick Charge 3.0 Dual USB Motorcycle Phone Charger with Voltmeter & ON/Off Switch, Waterproof Quick Disconnect SAE to USB Adapter for Phone, Tablet, GPS

#6

6. Intckwan 48W USB-C Charger

• Input Voltage: 12 V DC
• Output Voltage: 5 V DC
• Compatible Devices: iPhone, iPad, Android devices, GPS units…

Best for: Wide-fit 12–24V handlebar charger.

Why it ranks #6: Advertises 48W output, IP65 protection, and compatibility with 12–24V vehicles; the listed details give less information about its ports and controls.

A stated 48W output and fit for 7/8- to 1-inch handlebars position the Intckwan as a dual-port charger for several 12–24V vehicle types. Its USB-C and USB ports provide two connection options for phones, tablets, GPS units, and cameras, while the specified IP65 rating adds protection for motorcycle use.

The stated 22–25.4mm handlebar range covers common mounting sizes within the listing, and the 12–24V vehicle compatibility extends beyond motorcycles to ATVs and e-bikes. Dual USB Type-C and USB ports let riders connect devices using either interface, with 48W listed as total output. Heat-resistant ABS and high-conductivity copper are specified construction materials, while the IP65 rating indicates the listed ingress protection. These details make it relevant for mixed-device setups, though the supplied information does not break down output by port.

Skip it if you need per-port charging rates before connecting two devices; EXTRACTME lists separate 30W USB-C PD and 18W USB-A outputs.

Intckwan suits riders with a 7/8- to 1-inch handlebar who want dual-port charging across 12–24V vehicles. Its IP65 rating and broad device list are useful, but individual port output figures are not supplied.

Listed on Amazon as: Upgraded 48W Motorcycle Phone Charger IP65 Waterproof Motorcycle USB Charger,Dual Port USB Type-C Handlebar Charger 3.0 Fast Charge Adapter,Sae to USB Quick Charging Socket for Phone/Tablet/GPS/Camera

#7 · Best Retractable Cable

7. BlueFire Retractable-Cable Charger

• Input Voltage: 12 V
• Output Voltage: 12 V
• Compatible Devices: Cellular Phones

Best for: Retractable cable convenience.

Why it ranks #7: Its 3-in-1 design combines USB-A, USB-C, and a retractable Type-C cable, with IP56 protection and a voltmeter.

A retractable Type-C cable joins USB-A and USB-C ports in BlueFire’s three-in-one motorcycle charger, giving riders multiple connection options from one handlebar-mounted unit. Its listed IP56 waterproof rating and LED voltmeter add weather protection and a voltage readout, while the stated 12–24V input covers a range of vehicle electrical systems.

The combination of USB-A, USB-C, and a retractable Type-C cable can simplify charging when devices use different connections, and the retractable lead can be stowed rather than left loose. BlueFire lists handlebar and mirror mounting, so buyers can choose between two mounting locations. The IP56 rating identifies its stated water-and-dust protection, and the LED voltmeter provides a visible voltage reading. Its 12–24V input specification suits vehicles in that voltage range; the supplied information does not specify charging-output rates.

Skip it if you need a stated fast-charging wattage before choosing; Cliff Top’s USB-C charger specifies up to 18W PD output.

BlueFire suits riders who value several connection choices, a retractable lead, and handlebar-or-mirror placement on a 12–24V vehicle. Its stated IP56 rating and voltmeter are useful additions, but output-rate details are not provided.

Listed on Amazon as: Motorcycle USB Charger, 3-in-1 Fast Charging with USB-A & USB-C + Retractable Type-C Cable, 12–24V Waterproof IP56, LED Voltmeter, Handlebar & Mirror Mount for Motorbike ATV

#8

8. Cliff Top 18W USB-C Charger

• Input Voltage: 12 V
• Output Voltage: 5 V DC
• Compatible Devices: Smartphones, Tablets, GPS, Action Cameras…

Best for: Compact mirror-mount USB-C PD.

Why it ranks #8: A compact-style USB-C option rated up to 18W, with an SAE connection, 10mm mirror mount, and protective rubber cover.

An 18W USB-C Power Delivery output and 10mm mirror mount make the Cliff Top charger a compact choice for riders seeking power without occupying handlebar space. Its low-profile form keeps a charging port within reach, while the protective rubber cover helps shield it from rain, dust, and road splashes when closed.

The mirror-mounted layout can preserve handlebar room for a phone holder and other riding accessories, and the lightweight design keeps the charger close at hand. Its USB-C PD output reaches 18W for compatible phones, GPS units, cameras, or other listed riding devices. A rubber cover helps protect the port from road spray and dust when it is not being used. The listing specifies 12V input and includes extensive phone compatibility details, so check the device connection and mounting arrangement for your setup.

Skip it if you need two ports for simultaneous charging; BRCOVAN M26-A1 combines wireless charging with a separate USB-C output.

Cliff Top fits riders who want a low-profile USB-C PD socket on a 10mm mirror mount and room left on the handlebar. Its single listed port suits one connected device at a time.

Listed on Amazon as: Cliff Top Waterproof Motorcycle USB Charger, 18W PD, SAE, 10mm Mirror Mount

#9

9. BATIGE SAE USB-C Charger

• Input Voltage: 24 V
• Output Voltage: 5 V
• Compatible Devices: Cellular Phones

Best for: SAE adapter for two devices.

Why it ranks #9: The SAE-connected USB-C and USB 3.0 adapter supplies 5V and 4.8A total across two ports, and includes a 3.6-foot extension cable.

BATIGE’s SAE quick-release adapter supplies two USB charging ports with 4.8A total output, allowing two phones or other USB-powered devices to charge at once. Its 12–24V DC input and included extension cable suit riders connecting the unit to a compatible SAE power source rather than relying on a handlebar-mounted charging cradle.

Each port is rated at 2.4A, for 4.8A total, which gives two connected devices separate USB charging access. The SAE quick-release connection is intended for motorcycle use, and the included 3.6-foot cable adds reach between the power source and the adapter. Flame-retardant ABS is specified for the charger body, while the listing identifies the unit as waterproof. The package also includes zip ties, a fixed module, and screws for securing components during installation; the input range is 12–24V DC.

Skip it if you want a handlebar-mounted USB-C PD socket with a voltage display; Cliff Top lists an 18W USB-C PD charger and mirror mount.

BATIGE fits riders with a compatible SAE power connection who need two USB outputs and extra cable reach. Its listed 2.4A-per-port arrangement suits basic device charging, but no USB-C PD output is specified.

Listed on Amazon as: Motorcycle USB Charger SAE to USB Adapter Type C and USB 3.0

#10

10. MOTOPOWER Dual USB Charger

• Input Voltage: 12 V DC
• Output Voltage: 5 V DC
• Compatible Devices: Cameras, Cellular Phones, GPS, Smartwatches…

Best for: SAE-connected dual USB charging.

Why it ranks #10: A straightforward SAE-connected dual-USB charger rated at 5V and 3.1A maximum, but it lacks the newer USB-C and monitoring features of higher-ranked options.

A standard SAE quick-release connection makes the MOTOPOWER MP0609C convenient for riders who already use a compatible SAE cable. Its dual USB ports provide up to 3.1A at 5V for phones, GPS units, tablets, cameras, and other listed devices, with a water-resistant cap protecting the ports when they are not in use.

The SAE connection can simplify setup when it matches the rider’s existing SAE wiring, and the quick-release format supports disconnecting the adapter. Dual USB ports allow two devices to connect, with the stated 3.1A maximum output depending on device draw. The seamless injection body and water-resistant cap help guard the charger against water exposure. MOTOPOWER specifies 12–24V input and lists an automatic-off feature, while noting that a fused ring-terminal harness is not included and an existing fused SAE harness is needed for safe operation.

Skip it if you lack a fused SAE harness and want a supplied handlebar-mounted charger; Nilight includes mounting brackets and an SAE extension cable.

Choose the MP0609C if your motorcycle already has a compatible fused SAE connection and you want two USB ports for ride electronics. Its 3.1A maximum is shared according to device draw, and the harness is not included.

Listed on Amazon as: MOTOPOWER MP0609C 3.1Amp Waterproof Motorcycle Dual USB Charger Kit SAE to USB Adapter Cable Phone Tablet GPS Charger