Pressure washing a house typically costs $250-$600, with many standard two-story homes near $450. The final price depends on exterior square footage, stories, siding material, soil severity, access, local labor rates, and whether the contractor uses pressure washing or a lower-pressure soft-wash process.
Key Facts and Quick Answer
- A typical professional house wash costs $0.15-$0.40 per exterior square foot, or about $250-$600 for many homes.
- A 1,000-1,500-square-foot one-story home commonly costs $150-$300; a 1,500-2,500-square-foot two-story home commonly costs $250-$600.
- Vinyl siding usually receives a soft wash, while concrete can tolerate substantially higher pressure.
- A normal residential job takes 1-4 hours, including setup, washing, rinsing, and cleanup.
- Roof cleaning, gutters, driveways, patios, and decks may add $100-$600 each.
- A low quote can exclude screens, detached buildings, heavy oxidation, water access, plant protection, or minimum service charges.
What Determines the Price?
House washing costs reflect labor, risk, equipment, chemistry, and the amount of exterior surface rather than the home’s indoor floor area alone. A 2,000-square-foot ranch can present more washable wall area than a compact two-story home, while steep grades, limited access, and delicate siding increase labor.
Contractors usually estimate the following variables:
- Washable exterior area: walls, gables, porches, and attached structures.
- Height: ladders, poles, lifts, hose length, and fall exposure.
- Surface type: vinyl, stucco, wood, brick, stone, or fiber cement.
- Contamination: pollen and dust cost less to remove than algae, oxidation, grease, or thick moss.
- Site access: hose distance, water availability, gates, landscaping, and parking.
- Local overhead: wages, insurance, fuel, licensing, and disposal requirements.
- Minimum charge: small homes may still incur a $150-$250 visit minimum.
A professional estimate should identify the surfaces included, cleaning method, expected result, exclusions, and any chemical or access surcharge.
How Much Does It Cost to Pressure Wash a House by Size?
The cost to pressure wash a house generally rises with wall area, height, setup time, and rinsing requirements. The table below gives typical U.S. residential ranges, not guaranteed local quotes.
| Home profile | Typical floor area | Typical price | Typical duration |
|---|---|---|---|
| Small one-story | 800-1,200 sq. ft. | $150-$275 | 1-2 hours |
| Standard one-story | 1,200-1,800 sq. ft. | $200-$400 | 1.5-3 hours |
| Standard two-story | 1,500-2,500 sq. ft. | $250-$600 | 2-4 hours |
| Large two-story | 2,500-3,500 sq. ft. | $450-$800 | 3-5 hours |
| Three-story or complex home | 2,500-4,000+ sq. ft. | $600-$1,200+ | 4-7 hours |
These timeframes include ordinary setup and cleanup. They can expand when a crew must move furniture, protect extensive landscaping, work around solar panels, or treat severe organic growth.
A practical estimating rule is:
Estimated price = service minimum or washable area × local rate + access, soil, and add-on charges.
For example, 2,000 washable square feet at $0.25 per square foot produces a $500 base price. That figure may become $600 if the rear elevation requires ladder work and heavy algae treatment.
Why Stories Can Matter More Than Square Footage
Height affects production speed and worker exposure. Two homes with identical floor areas can differ by $100-$300 when one has easy ground-level access and the other has tall gables, balconies, steep slopes, or restricted ladder placement.
In practice, a second story does not automatically double the price. It adds setup, hose management, extension-pole work, and safety controls. A lift may add $150-$400 per day where ladders cannot be used safely.
Typical Rates and Pricing Models
Residential exterior cleaners commonly use a flat project price, a square-foot rate, or an hourly calculation. Customers should compare the total scope rather than choosing the lowest advertised unit rate.
| Pricing model | Typical figure | Best use | Main limitation |
|---|---|---|---|
| Square-foot pricing | $0.15-$0.40 per sq. ft. | Similar homes and repeat work | “Square foot” may mean floor or wall area |
| Hourly pricing | $50-$100 per worker-hour | Small or uncertain jobs | Final cost depends on productivity |
| Flat house rate | $250-$600 typical | Standard residential washes | Scope exclusions may be hidden |
| Story-based pricing | $150-$300 per story | Simple homes with uniform access | Does not capture soil or material differences |
| Minimum visit charge | $150-$250 | Small homes or isolated jobs | Applies even when washing takes little time |
Hourly billing should state whether the rate applies per technician or per crew. Two workers at $75 per hour can produce a $300 labor charge in two hours, before chemicals, travel, insurance, and overhead.
How Local Labor Rates Change the Estimate
Regional price differences come from labor costs, insurance premiums, water restrictions, travel distance, and demand. A house wash in a dense metropolitan area may cost 20%-50% more than a similar rural job, while remote properties can incur a travel surcharge of $25-$100.
Climate also changes frequency and severity. Humid areas, coastal neighborhoods, heavily wooded lots, and shaded north-facing walls often develop organic staining sooner than dry, sunny locations.
Which Surfaces Cost More to Clean?
Siding material determines allowable pressure, chemical dwell time, rinsing technique, and the chance of permanent damage. Porous or fragile materials usually cost more because the operator must work slowly and manage water carefully.
| Exterior material | Typical house-wash price | Suitable method | Main risk |
|---|---|---|---|
| Vinyl siding | $150-$400 | Low-pressure soft wash | Water intrusion at seams |
| Stucco or Dryvit | $300-$700 | Low-pressure chemical wash | Cracking, erosion, trapped moisture |
| Brick and stone | $300-$600 | Controlled pressure or soft wash | Mortar erosion and efflorescence |
| Wood siding or cedar | $300-$800 | Gentle low-pressure wash | Fuzzy grain, splintering, paint loss |
| Fiber-cement siding | $250-$600 | Low-to-moderate pressure | Damaged caulk and paint coating |
These are typical project ranges for the exterior material, not universal tariffs. A house with mixed materials may receive separate rates for siding, masonry, retaining walls, and painted trim.
Vinyl Siding
Vinyl is usually the least expensive wall material because it cleans quickly and does not require aggressive abrasion. The operator should spray downward or horizontally, keep the nozzle away from seams, and avoid forcing water behind overlapping panels.
High pressure can loosen panels, damage caulk, and drive water into wall assemblies. A soft wash uses detergent or an appropriate biocidal solution with low-pressure rinsing.
Stucco, Wood, and Fiber Cement
Stucco and wood need more controlled treatment than vinyl. Excessive pressure can remove stucco texture, scar wood fibers, or strip paint from siding and trim.
Wood restoration is not the same service as house washing. Removing gray oxidation, failed paint, or deep tannin stains may require sanding, stripping, brightening, and repainting, which can cost $1,000-$5,000 or more for a full exterior.
Brick, Stone, and Concrete
Masonry tolerates more pressure than siding, but older mortar may be weaker than the brick itself. Pressure can remove the soft outer mortar surface, causing accelerated water entry and expensive repointing.
Pressure washing also has limits. It may remove surface dirt and biological growth from concrete but may not remove oil that has penetrated deeply. Oil treatment, hot water, absorbent products, or repeated applications can add $25-$150.
Pressure Washing, Power Washing, and Soft Washing Compared
Pressure washing uses pressurized water, power washing adds heat, and soft washing relies primarily on cleaning chemistry with controlled pressure. The terms are often used interchangeably in advertising, so the equipment and method should be confirmed directly.
| Method | Water condition | Typical pressure | Appropriate applications |
|---|---|---|---|
| Pressure washing | Cold water | 1,500-4,000 PSI | Concrete, some brick, hard masonry |
| Power washing | Heated water | 1,500-4,000 PSI | Grease, oil, commercial grime |
| Soft washing | Chemical solution and rinse water | Usually below 1,000 PSI | Siding, stucco, roofs, painted surfaces |
| Garden-hose cleaning | Unpressurized cold water | 40-60 PSI | Light dust and loose pollen |
PSI measures force at the nozzle. GPM measures water volume. A commercial pump may deliver 5-8 GPM, while a consumer rental machine may deliver about 2 GPM, so the professional unit can rinse faster even when the advertised PSI is similar.
Does Soft Washing Remove Mold and Algae?
Soft washing can remove and chemically treat biological growth more effectively than water pressure alone. The solution must match the surface, remain in contact for an appropriate dwell time, and be rinsed without damaging plants, metals, seals, or coatings.
Cleaning does not make a wall permanently resistant to regrowth. Shade, moisture, tree cover, and poor drainage can allow algae or mildew to return within 6-24 months.
The U.S. Environmental Protection Agency advises following pesticide and disinfectant label directions when chemical products make antimicrobial claims. A contractor should identify the product, dilution, application method, and runoff precautions rather than promising permanent mold prevention.
What Does a House-Washing Service Include?
A basic service normally includes exterior wall cleaning, rinsing, ordinary plant protection, and cleanup of incidental overspray. It may not include roofs, gutters, screens, detached garages, interior courtyards, heavy oxidation, or paint removal.
Before booking, clarify these inclusions:
- Main siding and accessible exterior walls
- Gables, soffits, fascia, and trim
- Porches or attached entry areas
- Exterior window rinsing, not glass detailing
- Pre-wetting and post-rinsing of nearby plants
- Moving or protecting lightweight outdoor items
- Treatment of visible algae, mildew, and dirt
- Cleanup of hoses and obvious chemical residue
Gutter brightening, screen cleaning, oxidation removal, and second-story window detailing often require separate pricing.
Common Add-On Costs
Bundling related work can reduce travel and setup costs, but the services require different tools and expertise. A roof treatment should not be added merely because a house-washing crew has a pump.
| Add-on service | Typical price | Typical duration | Important limitation |
|---|---|---|---|
| Roof soft washing | $300-$600 | 2-5 hours | Steep roofs may cost more |
| Interior and exterior gutters | $150-$300 | 1-3 hours | Repairs are separate |
| Driveway and walkway | $100-$250 | 1-3 hours | Oil stains may remain |
| Deck or patio | $150-$350 | 1-3 hours | Refinishing is separate |
| Fence washing | $100-$300 | 1-3 hours | Wood may need brightening |
| Detached garage | $75-$250 | 1-2 hours | Access and size control price |
An add-on quote should state whether the price covers one side or both sides, furniture movement, stain treatment, and post-cleaning rinse water.
DIY Versus Hiring a Professional
DIY washing costs less at the point of purchase but creates a larger damage and time risk. A rental machine often costs $40-$100 per day, while a consumer pressure washer costs approximately $150-$400 before hoses, nozzles, detergents, protective equipment, and repairs.
| Option | Typical direct cost | Time commitment | Main risk | Result |
|---|---|---|---|---|
| Professional crew | $250-$600 | 1-4 hours | Low if insured and trained | Consistent |
| Machine rental | $40-$100 per day | 6-12 hours | Siding, windows, injury | Variable |
| Machine purchase | $150-$400 | 6-12 hours | Incorrect pressure or chemistry | Variable |
| Hose and hand cleaning | $30-$50 supplies | 1-3 days | Low equipment risk | Limited |
The most common homeowner mistake is selecting a nozzle by pressure rating rather than by surface and spray pattern. A narrow 0-degree tip can etch concrete, remove mortar, cut skin, and damage siding within seconds.
DIY cleaning is more reasonable for a small concrete path or patio when the operator can control runoff and maintain safe footing. House siding, roofs, tall elevations, stucco, and painted wood are poor beginner projects.
Safety, Damage, and Environmental Problems
Pressure washing can force water behind siding, break window seals, damage electrical components, strip paint, and spread contaminated runoff. The operator must control both the water stream and the chemistry.
- Inspect siding, caulk, paint, windows, outlets, lights, vents, and hose bibs.
- Identify fragile surfaces and choose a test area that is inconspicuous.
- Close windows and doors, cover outdoor electrical components, and remove delicate objects.
- Pre-wet plants and soil before chemical application.
- Apply detergent or soft-wash solution from the bottom upward when appropriate, avoiding streaks.
- Rinse from the top downward with controlled pressure and a suitable nozzle.
- Check seams, vents, windowsills, and landscaping during the work.
- Collect or redirect runoff when local stormwater rules require it.
- Inspect the finished surfaces before removing protection.
Never spray upward beneath siding laps. Water driven behind cladding can wet sheathing and insulation, where drying is slow and hidden deterioration may develop.
Lead Paint and Old Homes
Homes built before 1978 may contain lead-based paint. Pressure washing can create chips, dust, and contaminated runoff when painted surfaces are failing. The U.S. Environmental Protection Agency’s Renovation, Repair and Painting requirements may apply to paid renovation work that disturbs lead paint.
A contractor should ask about construction date, paint condition, and required containment before washing an older painted exterior. Washing is not a safe substitute for lead-paint abatement.
When Washing Should Be Delayed
Postpone the job during freezing conditions, electrical storms, high winds, or temperatures that prevent safe drying. Strong wind can carry chemical mist onto vehicles, neighboring property, and sensitive plants.
Rain does not always make a wash impossible, but it can dilute cleaning agents and interfere with dwell time. Ask the contractor how weather affects the treatment and whether rescheduling is free.
How to Compare Quotes Properly
The lowest bid may represent a smaller scope rather than a cheaper equivalent service. Compare quotes line by line.
Ask each contractor:
- What exact surfaces are included?
- Is the price based on floor area, wall area, stories, or a flat minimum?
- Will siding receive soft washing rather than high pressure?
- What products and approximate concentrations will be used?
- Who protects and rinses landscaping?
- Are windows, screens, gutters, porches, and detached structures excluded?
- What happens if oxidation, oil, or old paint cannot be removed?
- Is the company insured, and can it provide a certificate?
- How are chemical runoff and storm drains handled?
- Is there a written damage policy and a weather rescheduling policy?
Commercial general liability insurance does not guarantee technical competence, but an uninsured operator leaves the homeowner with greater exposure when a window breaks or a worker is injured. Verify the company’s insurance, business identity, references, and local licensing requirements.
When and How Often Should a Home Be Washed?
Most homes need exterior cleaning every 1-2 years, while shaded, humid, coastal, or wooded properties may need annual service. Dry climates with full sun may remain presentable for two or more years.
| Property condition | Typical interval | Early warning sign |
|---|---|---|
| Dry, sunny, open lot | 24-36 months | Dust and pollen film |
| Typical suburban home | 12-24 months | Green or gray wall staining |
| Shaded or wooded lot | 12 months | Algae on north-facing walls |
| Humid coastal location | 6-18 months | Mildew and salt residue |
| Home with failing drainage | After correction, then 12 months | Repeated splash marks |
Late spring is useful for removing winter grime and pollen. Early autumn can clear organic growth before a wet season. The best timing remains surface and weather dependent, not calendar dependent.
Frequently Asked Questions About how much does it cost to pressure wash a house
Is $200 enough to wash a house?
$200 may cover a small one-story home, a limited exterior, or a contractor’s minimum service area. It may not cover a large two-story property, heavy growth, difficult access, detached structures, or gutters. Confirm the square footage, surfaces, chemical treatment, and cleanup included before treating $200 as a complete quote.
How much water does house washing use?
A professional soft-wash job may use several hundred gallons, although the amount varies with pump output, rinsing time, surface area, and operator technique. A machine rated at 5-8 GPM can move water quickly, but efficient dwell time and controlled rinsing can reduce waste compared with prolonged high-pressure spraying.
Will pressure washing remove oxidation from vinyl siding?
Water pressure alone may not remove chalky vinyl oxidation without damaging the surface. Specialized oxidation cleaners and gentle agitation may improve the appearance, but severe fading or chalking can remain. Ask for a test patch because a contractor cannot guarantee uniform color restoration on weathered siding.
Can pressure washing remove every stain from concrete?
Pressure washing removes loose dirt, algae, and some surface staining, but oil, rust, paint, and tannin marks may penetrate concrete. Hot water, degreasers, rust removers, or repeated treatment may improve results without producing a perfect match. A written quote should distinguish cleaning from stain restoration.
Should windows be included in a house-washing quote?
Exterior window rinsing is often included, but detailed glass cleaning, screen washing, hard-water stain removal, and interior cleaning are usually separate services. Ask whether the crew uses low pressure near seals and whether water spots are covered by the service guarantee.
How soon can I use outdoor furniture after washing?
Outdoor furniture can usually return after the surfaces and surrounding area are rinsed and dry, often within 1-4 hours in suitable weather. Chemical-treated areas may require longer. Follow the product label and keep children and pets away until the contractor confirms that treated surfaces are safe.
Conclusion: Budgeting a House Wash
The answer to how much does it cost to pressure wash a house is usually $250-$600, with a typical two-story home near $450. Use that range only as a starting point: surface material, elevation, contamination, access, local labor, minimum charges, and included services can move the quote substantially.
For most siding, request a soft-wash method rather than high pressure. Compare written scopes, verify insurance, ask how plants and runoff are protected, and treat unusually low bids as incomplete until every exclusion is clear.


