Best Wheelie Bars For Drag Cars: 8 RC Options Compared

Best Wheelie Bars For Drag Cars

A strong wheelie bar for a drag car should match the chassis and offer the length or adjustment your setup needs; these options suit RC drag racers upgrading a Losi 22S or Traxxas Slash-based car. The Losi Carbon Wheelie Bar, Complete: 22S Drag leads with a stated 12.5-inch wheel-to-axle length and included required hardware. Other choices include an extra-long 14.5-inch Exotek bar for the 22S, a hinged 13.5-inch Exotek setup for Drag Slash-based chassis, and simpler truss replacements.

Fitment matters more than material alone: a part designed for the wrong chassis may not install correctly. Compare the listed compatibility, dimensions, materials, and adjustment features before choosing, and verify the product’s fit against your exact vehicle model and existing mounting points.

The Losi Carbon Wheelie Bar, Complete: 22S Drag is the best overall choice here for a Losi 22S drag car. Its stated wheel-center-to-rear-axle length is 12.5 inches, and the product listing says the extra required hardware is included. For a longer 22S setup, the Exotek 22S Ladder Wheelie Bar measures 14.5 inches axle to axle; Traxxas Drag Slash owners can instead consider the Exotek Drag Slash Pro Wheelie Bar Set, which has a 13.5-inch axle-to-axle length and a hinged design.

Our Top Picks

Losi Carbon Wheelie BarBest Overall

Losi Carbon Wheelie Bar

Designed as a complete 22S Drag part, it measures 12.5 inches from wheel center to rear axle and includes the required extra hardware.

View on Amazon
Exotek 22S Ladder Wheelie BarLongest 22S Option

Exotek 22S Ladder Wheelie Bar

Made for the Losi 22S drag car, this extra-long carbon-fiber bar measures 14.5 inches axle to axle for buyers seeking a longer setup.

View on Amazon
Exotek Drag Slash Pro BarHinged Slash Design

Exotek Drag Slash Pro Bar

The Drag Slash-based design uses a hinged concept, 3mm carbon-fiber bar, and a stated 13.5-inch axle-to-axle length.

View on Amazon

Compare Wheelie Bars by Fitment and Design

#ProductMaterial TypeWeightSizeBuy
1Carbon Fiber5.28 oz12.5 inView on Amazon
2Plastic3.68 oz14.5 inView on Amazon
3
Exotek Drag Slash Pro Bar3. Exotek Drag Slash Pro BarHinged Slash Design
Plastic16 oz13.5 inView on Amazon
4
Pro-Line Stinger Wheelie Bar4. Pro-Line Stinger Wheelie BarAdjustable Single Wheel
Plastic—1/10 scaleView on Amazon
5
Powerhobby Carbon Bar Set5. Powerhobby Carbon Bar SetTraxxas Drag Slash owners
—2 lb—View on Amazon
6
Generic Aluminum Truss Set6. Generic Aluminum Truss SetLosi 22S truss replacements
Aluminum——View on Amazon
7
RCAWD Alloy Wheelie Bar Truss7. RCAWD Alloy Wheelie Bar TrussLosi 22S alloy upgrades
—2.72 oz—View on Amazon
8
ST Racing Adjustable Bar Kit8. ST Racing Adjustable Bar KitAdjustable multi-chassis setups
Plastic2.6 oz—View on Amazon

Detailed Reviews: Best Wheelie Bars For Drag Cars

Losi Carbon Wheelie Bar

#1 · Best Overall

1. Losi Carbon Wheelie Bar

  • Material Type: Carbon Fiber
  • Weight: 5.28 oz
  • Size: 12.5 in

Best for: Losi 22S drag-car owners.

Why it ranks #1: Designed as a complete 22S Drag part, it measures 12.5 inches from wheel center to rear axle and includes the required extra hardware.

A 12.5-inch carbon-fiber bar, measured from wheel center to rear axle, gives the Losi 22S Drag a clearly specified rear support setup. Losi says the TLR team designed it with rear-end suspension dynamics in focus, making it a purpose-specific choice for owners seeking a complete bar rather than a bare component.

The carbon-fiber construction keeps the listed material specific, while the 12.5-inch wheel-center-to-rear-axle measurement gives buyers a concrete dimension to consider for their chassis setup. Losi also says all extra required hardware is included, so the package is presented as a complete wheelie bar rather than a parts-only replacement. Its stated focus on rear suspension dynamics gives it a defined drag-car role, but the supplied fit information is specifically for the 22S Drag.

Pros
  • Carbon-fiber construction
  • 12.5 inches from wheel center to rear axle
  • Extra required hardware included
  • Designed by the TLR team with rear suspension dynamics in focus
Cons
  • Its stated application is the Losi 22S Drag, limiting its appeal for other chassis.

Skip it if you need a bar expressly listed for a Traxxas Drag Slash; the Powerhobby 3mm Carbon Fiber Wheelie Bar Set names that chassis.

Choose this complete carbon-fiber bar if you run a Losi 22S Drag and want included hardware plus a stated suspension-dynamics focus. Its listed application is specific, so buyers of other chassis should look elsewhere.

Full product details
BrandLosi
ColorCarbon
Included ComponentsCarbon Wheelie Bar, Complete: 22S Drag
Item Dimensions11 x 4.63 x 1.01 inches
Item Weight5.28 ounces
ManufacturerLosi
Part NumberLOS331017
Manufacturer recommended age14 months and up
MaterialCarbon Fiber
ModelCarbon Wheelie Bar, Complete: 22S Drag
Model NumberLOS331017
Operation Modemanual
Size12.5 Inches

Listed on Amazon as: Losi Carbon Wheelie Bar Complete 22S Drag LOS331017 Electric Car/Truck Option Parts

View on Amazon
Exotek 22S Ladder Wheelie Bar

#2 · Longest 22S Option

2. Exotek 22S Ladder Wheelie Bar

  • Material Type: Plastic
  • Weight: 3.68 oz
  • Size: 14.5 in

Best for: Losi 22S high-speed passes.

Why it ranks #2: Made for the Losi 22S drag car, this extra-long carbon-fiber bar measures 14.5 inches axle to axle for buyers seeking a longer setup.

A 14.5-inch axle-to-axle length makes Exotek Racing's ladder bar the extra-long option in this group for the Losi 22S RC Drag Car. The description associates that longer span with added stability during high-speed passes, while identifying carbon fiber and NPRC legality as further defining details.

Exotek states that the extra-long bar measures 14.5 inches from axle to axle and is for the Losi 22S RC Drag Car. Its description links the longer span to greater stability and straighter, faster passes without needing to let off the throttle, making length relevant to the stated operating goal. Carbon fiber is named in the product title, and the description also identifies the bar as NPRC legal; buyers should account for its extended span when assessing chassis clearance and storage.

Pros
  • 14.5 inches axle to axle
  • Carbon-fiber bar identified in the title
  • Listed for Losi 22S RC Drag Car
  • Description identifies it as NPRC legal
Cons
  • Its 14.5-inch axle-to-axle span may not suit setups seeking a shorter wheelie bar.

Skip it if you want a compact 12.5-inch Losi 22S bar; Losi's Carbon Wheelie Bar Complete gives that wheel-center-to-rear-axle measurement.

Choose this for a Losi 22S drag car where the stated extra-long span and high-speed-pass stability are priorities. The 14.5-inch axle-to-axle dimension is a consequential fit and storage consideration.

Full product details
BrandEXOTEK RACING LLC
ColorBlack
Item Dimensions12.5 x 3 x 0.4 inches
Item Weight3.68 ounces
ManufacturerEXOTEK RACING LLC
Part NumberETK2033
Manufacturer recommended age14 months and up
MaterialPlastic
Operation ModeAutomatic
Size14.5 inches
Additional InformationImportant Information Toy Safety Our recommended age: Manufacturer's minimum age: 14 months

Listed on Amazon as: 22S Lddr Wheelie Bar St CBN Fbr Extr Long Adjust ETK2033 Electric Car/Truck Option Parts

View on Amazon
Exotek Drag Slash Pro Bar

#3 · Hinged Slash Design

3. Exotek Drag Slash Pro Bar

  • Material Type: Plastic
  • Weight: 16 oz
  • Size: 13.5 in

Best for: Long-bar Drag Slash setups.

Why it ranks #3: The Drag Slash-based design uses a hinged concept, 3mm carbon-fiber bar, and a stated 13.5-inch axle-to-axle length.

A 13.5-inch axle-to-axle span and hinged version 2 layout define Exotek Racing's Drag Slash Pro bar. Its 3mm carbon-fiber bar and heavy-duty machined titanium turnbuckle give buyers two concrete construction details, while the turnbuckle controls bar height and angle for setup changes.

The extra-long 13.5-inch axle-to-axle dimension gives Drag Slash buyers a clear size to assess for their chassis and storage needs. Exotek pairs the 3mm carbon-fiber bar with a machined titanium turnbuckle that controls height and angle, making those settings adjustable through a named component. The version 2 hinged design updates Exotek's single-wheel concept, and the stated application is a TRA 2WD Drag Slash-based chassis rather than an unrestricted universal fit.

Pros
  • 13.5 inches axle to axle
  • 3mm carbon-fiber bar
  • Machined titanium turnbuckle controls height and angle
  • Version 2 hinged single-wheel design
Cons
  • The stated fit is limited to TRA 2WD Drag Slash-based chassis.

Skip it if you need a bar explicitly listed for the Losi 22S Drag; Losi's Carbon Wheelie Bar Complete names that model.

Consider this for a TRA 2WD Drag Slash-based build needing a long hinged bar with height and angle control. Its 13.5-inch axle span and stated chassis application are key fit considerations.

Full product details
BrandExotek RC
ColorBlack
Item Dimensions1 x 1 x 1 inches
Item Weight16 ounces
ManufacturerExotek
Part NumberEXO2135
Manufacturer recommended age14 months – 9 years
MaterialPlastic
Operation ModeManual
Size13.5 inches
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Toy Safety Our recommended age: Manufacturer's minimum age: 14 months not_suitable_under_14_years_supervision

Listed on Amazon as: Exotek Racing 2135 Drag Slash Pro Wheelie Bar Set, 3mm CF with Single Wheel Style

View on Amazon
Pro-Line Stinger Wheelie Bar

#4 · Adjustable Single Wheel

4. Pro-Line Stinger Wheelie Bar

  • Material Type: Plastic
  • Size: 1/10 scale

Best for: Slash 2WD drag setups.

Why it ranks #4: Built for the Slash 2WD, this pre-built single-wheel bar has adjustable height, smooth ball bearings, and an extra wheel included.

An adjustable-height single-wheel layout gives the Pro-Line Stinger a practical setup lever for Slash 2WD drag runs. It arrives pre-built from stiff, durable nylon, while its wheel rolls on smooth ball bearings; together, those details make it a ready-to-fit option for buyers prioritizing adjustability and a completed assembly.

The adjustable wheelie-bar height lets a Slash 2WD owner choose among bar positions, while the pre-built assembly removes the need to assemble the bar from separate listed components. Pro-Line specifies stiff, durable nylon and a wheel running on smooth ball bearings, linking the material and rolling detail to a straightforward single-wheel setup. An extra wheel is included, giving the package a spare listed component for the bar's wheel position.

Pros
  • Adjustable wheelie-bar height
  • Pre-built assembly
  • Stiff, durable nylon construction
  • Wheel rides on smooth ball bearings; extra wheel included
Cons
  • The listed application is Slash 2WD, not a broadly specified multi-chassis fit.

Skip it if you run a Losi 22S 2WD and need a truss replacement; the Generic Aluminum Alloy Wheelie Bar Truss Set lists that chassis.

The Stinger suits Slash 2WD owners who want a pre-built single-wheel bar with adjustable height and bearing-supported wheel rotation. Its stated chassis application is narrow, so confirm the intended platform before choosing it.

Full product details
BrandPro-Line
ColorBlack
Included Components1/10 Stinger Drag Racing Wheelie Bar: Slash
ManufacturerPro-line Racing
Part NumberPRO635100
MaterialPlastic
Model NumberPRO635100
Size1/10 scale

Listed on Amazon as: Pro-Line Racing Stinger Drag Racing Wheelie Bar Slash 2 Wheel Drive PRO635100 Electric Car/Truck Option Parts

View on Amazon
Powerhobby Carbon Bar Set

#5

5. Powerhobby Carbon Bar Set

  • Weight: 2 lb

Best for: Traxxas Drag Slash owners.

Why it ranks #5: This 3mm carbon-fiber set specifically fits the Traxxas Drag Slash, although the listing provides little further detail on dimensions or adjustment.

A 3mm carbon-fiber construction is the defining detail of this Powerhobby wheelie bar set for the Traxxas Drag Slash. The named chassis fit gives Drag Slash owners a direct application to consider, while the carbon-fiber specification identifies the bar material without relying on unlisted adjustment or assembly claims.

Powerhobby identifies this set as fitting the Traxxas Drag Slash, which gives owners of that chassis a specific application rather than a universal-fit claim. Its title also specifies 3mm carbon fiber, so buyers can weigh a stated material and thickness when selecting a replacement or upgrade component. The supplied product information does not describe adjustment, included hardware, or an installation process, so those details should not be assumed from the set name alone.

Pros
  • Listed for Traxxas Drag Slash
  • 3mm carbon-fiber specification
  • Identified as a wheelie bar set
  • Manufacturer minimum age listed as 16 years
Cons
  • The supplied fit information names only Traxxas Drag Slash.

Skip it if you need an adjustable-height bar for a Slash 2WD; Pro-Line's Stinger Drag Racing Wheelie Bar lists height adjustment.

This set is for Traxxas Drag Slash owners who value the stated 3mm carbon-fiber construction. The supplied details establish a specific chassis fit, but do not establish adjustability, included hardware, or installation steps.

Full product details
BrandPowerhobby
Item Weight2 pounds
ManufacturerPowerhobby
Manufacturer recommended age16 years and up
Dimensions2 x 2 x 2 inches
Additional InformationImportant Information Toy Safety Our recommended age: Manufacturer's minimum age: 16 years

Listed on Amazon as: 3mm Carbon Fiber Wheelie Bar Set for Traxxas Drag Slash

View on Amazon
Generic Aluminum Truss Set

#6

6. Generic Aluminum Truss Set

  • Material Type: Aluminum

Best for: Losi 22S truss replacements.

Why it ranks #6: The aluminum truss is listed as a replacement for the Losi 1/10 22S 2WD and includes bearings, wheels, screws, and sleeves.

An aluminum-alloy truss specified as a replacement for the Losi 1/10 22S 2WD drag car is the core of this wheelie-bar set. Its listed package includes bearings, screws, sleeves, and wheels alongside the truss, giving buyers a defined group of components for a chassis-specific replacement.

The precise replacement listing for the Losi 1/10 22S 2WD drag car narrows the compatibility decision to a named platform. Aluminum alloy is specified for the truss, while the included four bearings, two screws, two sleeves, and two wheels describe the hardware supplied for the set. The product description connects the truss to support, stability, and smoother driving, so it is aimed at restoring or improving the wheelie-bar assembly rather than serving as a universal bar.

Pros
  • Listed as a replacement for Losi 1/10 22S 2WD drag car
  • Aluminum-alloy truss
  • Four bearings included
  • Includes two screws, two sleeves, and two wheels
Cons
  • The stated replacement fit is specific to the Losi 1/10 22S 2WD drag car.

Skip it if you need an extra-long carbon-fiber bar for a Losi 22S; Exotek Racing's 22S Ladder Wheelie Bar lists a 14.5-inch axle-to-axle length.

This set suits Losi 1/10 22S 2WD owners replacing a truss and wanting the listed bearing and hardware components together. Its application is specific, so it is not the choice for a different chassis.

Full product details
BrandGeneric
ColorBlue
ManufacturerGeneric
Part NumberGeneric2y39egm5zt-12
Manufacturer recommended age4 years and up
MaterialAluminum
Model NumberGeneric2y39egm5zt-12
Additional InformationImportant Information Toy Safety Our recommended age: Manufacturer's minimum age: 4 years

Listed on Amazon as: Aluminum Alloy Wheelie Bar Truss Set, Stable Performance for LOSI 1/10 22S 2WD Drag Car, Improve Driving Smoothness (Blue)

View on Amazon
RCAWD Alloy Wheelie Bar Truss

#7

7. RCAWD Alloy Wheelie Bar Truss

  • Weight: 2.72 oz

Best for: Losi 22S alloy upgrades.

Why it ranks #7: This CNC-machined 6061-T6 alloy truss lists fitment for Losi 1/10 22S 2WD No Prep models, but gives no length or adjustment details.

CNC-machined 6061-T6 alloy with a hard-anodized color treatment defines RCAWD's truss for the Losi 1/10 22S 2WD No Prep Drag Car. The listed model fit and lightweight-alloy construction make this a platform-specific truss option for owners seeking a machined component.

RCAWD lists fitment for the Losi 1/10 22S 2WD No Prep Drag Car and names several LOS model identifiers, giving buyers chassis details to compare before selecting the truss. Its CNC-machined, PTFE-coated hardened 6061-T6 alloy and hard-anodized finish specify the construction and surface treatment. The product is identified as a wheelie-bar truss upgrade, so its role is a truss component rather than a complete bar assembly with stated wheel or bearing contents.

Pros
  • Listed for Losi 1/10 22S 2WD No Prep Drag Car
  • CNC-machined 6061-T6 alloy
  • PTFE-coated hardened alloy
  • Hard-anodized color treatment
Cons
  • This is listed as a truss upgrade, not a complete wheelie-bar assembly.

Skip it if you need a complete Losi 22S bar with included hardware; Losi's Carbon Wheelie Bar Complete is listed as a complete assembly.

This truss suits Losi 1/10 22S 2WD No Prep Drag Car owners seeking a machined alloy upgrade. Its component role matters: the supplied description does not identify it as a complete bar assembly.

Full product details
BrandRCAWD
Item Weight2.72 ounces
Item model numberLOS231080R
ManufacturerRCAWD
Manufacturer recommended age14 years and up
Package Dimensions5.3 x 2 x 0.7 inches
Additional InformationImportant Information Toy Safety Our recommended age: Manufacturer's minimum age: 14 years

Listed on Amazon as: Machined Alloy Wheelie bar Truss for Losi 1-10 22S 2WD No Prep Drag Car RC car Red

View on Amazon
ST Racing Adjustable Bar Kit

#8

8. ST Racing Adjustable Bar Kit

  • Material Type: Plastic
  • Weight: 2.6 oz

Best for: Adjustable multi-chassis setups.

Why it ranks #8: Its 7-inch adjustable-angle design offers single- or double-wheel setups and fits Slash 2WD and Drag Slash, but is less specifically detailed for drag use.

A seven-inch length with adjustable angle and single- or double-wheel setup options gives the ST Racing Concepts kit useful configuration flexibility. Its stated compatibility spans Slash 2WD, Drag Slash, and Rustler, while the description specifies a CNC-machined aluminum ladder frame and bearing-equipped wheels.

The adjustable angle and choice of single- or double-wheel setup let buyers configure the bar around their preferred layout, while the seven-inch length gives a specific dimension to consider for chassis clearance. ST Racing Concepts lists compatibility with Slash 2WD, Drag Slash, and Rustler, a broader stated platform range than a single-model listing. Its aluminum ladder frame and wheels with high-quality bearings connect the frame construction and rolling hardware to the kit's use across those named chassis.

Pros
  • Seven-inch length
  • Adjustable angle
  • Single- or double-wheel setup options
  • Listed for Slash 2WD, Drag Slash, and Rustler
Cons
  • The listed length is seven inches, shorter than the 13.5-inch Exotek Drag Slash Pro bar.

Skip it if you specifically need a 13.5-inch hinged Drag Slash bar; Exotek Racing's 2135 Drag Slash Pro Wheelie Bar Set lists that span.

This kit fits buyers wanting angle adjustment and wheel-layout options across the listed Slash 2WD, Drag Slash, or Rustler platforms. Its seven-inch length is an important boundary for setups seeking a longer bar.

Full product details
BrandST Racing Concepts
Colorblack
Item Weight2.6 ounces
ManufacturerST Racing Concepts
Part NumberST3678WBK
MaterialPlastic
Model NumberST3678WBK
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Toy Safety Our recommended age: Manufacturer's minimum age: not_suitable_under_14_years_supervision

Listed on Amazon as: STRC Aluminim Adjustable Wheelie Bar Kit-TRA (Blk), STRST3678WBK

View on Amazon

Avoiding chassis-fit and mounting mismatches

A wheelie bar that fits a related RC model may still be wrong for your exact chassis, so check the stated fitment and mounting arrangement before ordering. The Losi Carbon Wheelie Bar is identified for the 22S Drag, while the Exotek 22S Ladder Wheelie Bar is described for the Losi 22S RC Drag Car. For Traxxas-based cars, the Exotek Drag Slash Pro Bar specifies TRA 2WD Drag Slash-based chassis, and the Powerhobby Carbon Bar Set says it fits the Traxxas Drag Slash.

These are not interchangeable fit claims. The Generic Aluminum Truss Set and RCAWD Alloy Wheelie Bar Truss identify Losi 1/10 22S 2WD fitment, with the RCAWD listing also naming several model numbers.

Check your vehicle’s precise version and mounting points; the supplied product data does not establish compatibility beyond each listed claim.

Why wheelie-bar length and setup are trade-offs

A longer bar can provide a different setup range, but the listed length alone does not establish the right launch setting for every car. The Losi Carbon Wheelie Bar measures 12.5 inches from wheel center to rear axle, while the Exotek 22S Ladder Wheelie Bar is stated as 14.5 inches axle to axle. The Exotek Drag Slash Pro Bar is 13.5 inches axle to axle and has a hinged design.

Note that these measurements use different reference points, so do not treat them as a directly comparable length scale. Adjustment also varies: the Pro-Line Stinger Wheelie Bar has adjustable height, the STRC kit has an adjustable angle and single- or double-wheel options, and the Exotek 22S bar is described as adjustable.

Confirm the measurement method and available adjustment before selecting a bar for your car.

How to Choose an RC Drag Wheelie Bar

Chassis fitment

Start with the exact chassis fitment, not a product’s general drag-racing appearance. The Losi Carbon Wheelie Bar is a complete part for the 22S Drag, and the Exotek 22S Ladder Wheelie Bar is for the Losi 22S RC Drag Car. Traxxas Drag Slash owners can compare the Powerhobby Carbon Bar Set, which states that it fits that model, with the Exotek Drag Slash Pro Bar, listed for TRA 2WD Drag Slash-based chassis.

The RCAWD truss names Losi 1/10 22S 2WD No Prep models. Choose the most explicit match for your vehicle; if the exact version or mounting points are unclear, verify them before buying.

Length and measurement reference

Compare bar length only after checking where each measurement begins and ends. The Losi Carbon Wheelie Bar is 12.5 inches from wheel center to rear axle; the Exotek 22S Ladder Wheelie Bar is 14.5 inches axle to axle; and the Exotek Drag Slash Pro Bar is 13.5 inches axle to axle. Since these reference points differ, the figures do not form a direct like-for-like ranking.

A buyer who wants the listed extra-long 22S design can consider the Exotek 22S Ladder Wheelie Bar, while a Drag Slash owner may favour the Exotek Drag Slash Pro Bar’s stated length and chassis fit. Check the available space and mounting arrangement on your car.

Adjustment, wheel style, and construction

Choose the adjustment and wheel arrangement that suit your intended setup, then consider the listed construction. The Pro-Line Stinger Wheelie Bar is a pre-built single-wheel design with adjustable height and ball-bearing rotation. The STRC Adjustable Bar Kit offers an adjustable angle and either single- or double-wheel configuration.

The Exotek Drag Slash Pro Bar uses a 3mm carbon-fiber bar and hinged design, while the Losi Carbon Wheelie Bar lists carbon fiber construction. These features vary, and the listings do not provide comparative performance testing.

Buyers who want a stated height adjustment can look at Pro-Line; those who want a choice of wheel configuration can consider STRC. Confirm that the configuration and mounting style work with your chassis.

Which wheelie bar should you choose?

For a Losi 22S Drag, choose the Losi Carbon Wheelie Bar for its 12.5-inch stated length and included required hardware. If you specifically want the extra-long listed 22S option, the Exotek 22S Ladder Wheelie Bar measures 14.5 inches axle to axle. Traxxas Drag Slash owners should compare the Exotek Drag Slash Pro Bar, with its 13.5-inch axle-to-axle measurement and hinged design, against the Powerhobby Carbon Bar Set, which explicitly lists Drag Slash fitment.

For adjustable height and a single-wheel layout, consider the Pro-Line Stinger Wheelie Bar for Slash 2WD. The Generic Aluminum Truss Set and RCAWD Alloy Wheelie Bar Truss are alternatives for listed Losi 22S fitments; verify your exact model before choosing either.

Frequently Asked Questions

How do I confirm a wheelie bar fits my exact RC drag car chassis and mounting points?

Confirm the exact chassis and model version, then compare the product’s stated fitment and mounting arrangement with your car. Check the bar’s measurements and the locations of its mounting points against the car or its manual. If fitment or included hardware is unclear, verify it with the seller before installation.

How should I set wheelie-bar height and angle for my track and launch setup?

Start with the car maker’s setup guidance and your track’s rules, then make small adjustments to height and angle. Test launches consistently, changing one setting at a time so you can assess its effect. Recheck fasteners after adjustments, and avoid assuming one setting will suit every surface or launch setup.

When should I choose a single-wheel bar instead of a double-wheel setup?

Choose a single-wheel bar when its layout suits your chassis and the setup you want; choose a double-wheel design when that layout better matches your fitment needs. Confirm the product’s stated configuration and mounting compatibility first. The title identifies a single-wheel option, but does not establish that it fits every drag car.

What should I check about hardware before choosing a wheelie bar?

Check whether the listing says required mounting hardware is included and whether that hardware matches your chassis. The Losi Carbon Wheelie Bar listing says extra required hardware is included; do not assume that applies to other bars. Confirm any missing or uncertain hardware before beginning installation.

How should I compare wheelie-bar length measurements?

Compare measurements only when they use the same reference points. The listed Losi bar measurement is wheel-center to rear axle, while the Exotek lengths are stated axle to axle. Those figures are not directly equivalent without matching measurement definitions, so confirm the reference points before using length to choose a bar.

Final Words

Choose by chassis fitment first, then compare layout and stated measurements. For a Losi 22S Drag, the Losi Carbon Wheelie Bar is the clear overall pick, with a stated 12.5-inch wheel-center-to-rear-axle length and required extra hardware included. For a longer 22S setup, consider the 14.5-inch Exotek.

Drag Slash owners can compare the hinged 13.5-inch Exotek with the Powerhobby bar’s listed fitment, verifying exact compatibility before ordering.

Leave a Reply

Your email address will not be published. Required fields are marked *