Best Wheel Seals For Semi Trucks: Drive, Steer, and Trailer Options

#1 · Best Overall

1. REVHD RM-D02

• Weight: 1.15 lb
• Package Dimensions: 6.81 x 6.69 x 1.65 in

Best for: Drive-axle reference match.

Why it ranks #1: This drive-axle seal explicitly lists 393-0273, 380003A, and 47691, giving buyers useful replacement-number matches for a semi-truck drive application.

REVHD identifies its RM-D02 as a drive-axle wheel seal and lists 393-0273, 380003A and 47691 as fit references. That combination gives technicians a clear application category and several concrete cross-check numbers when choosing a seal for a drive-axle service job.

The drive-axle designation helps distinguish RM-D02 from seals identified for trailer or driver-steer service, which matters when organizing parts for a wheel-end repair. Its title lists three fit references—393-0273, 380003A and 47691—so a buyer can compare the installed seal’s number against the stated alternatives. Package dimensions of 6.81 by 6.69 by 1.65 inches and a listed weight of 1.15 pounds offer practical handling and storage information.

Skip it if you need a tapered-spindle trailer seal; REVHD’s RM-T03 is the model specifically identified for that application.

RM-D02 suits a technician sourcing a drive-axle seal whose existing part matches one of the three listed references. Its limited published specifications make it a less informative choice when material or measurements guide selection.

Listed on Amazon as: RM-D02 Rev Max Drive Seal (Fits: 393-0273, 380003A, 47691)

#2 · Two-Pack Drive

2. Joyfolk 47691 Seal

• Weight: 1.64 lb

Best for: Two-seal replacement kit.

Why it ranks #2: The listing calls it an OEM direct replacement for 47691 and includes two seals, suiting a buyer who wants a spare with the replacement.

A two-seal package is the defining advantage of Joyfolk’s rear wheel seal drive: it supplies one seal for an immediate replacement and another as a maintenance backup. The listing identifies it as an OEM direct replacement for semi-trailer trucks using replacement part 47691, giving buyers a specific reference for the repair.

Joyfolk identifies the seal as a direct replacement for part 47691, which helps buyers assessing a semi-trailer rear wheel-end repair start from a named replacement reference. The two-piece package supports keeping a spare available for an unexpected maintenance need. Its installation guidance says to apply wheel-end lubricant to the inner and outer areas, giving the installer a stated preparation step. Rubber and iron are the listed materials; no dimensional measurements are supplied here.

Skip it if you need a listed outer diameter or bore measurement before selecting a seal; this listing gives neither.

This package suits a semi-trailer owner or maintenance shop seeking a 47691 replacement with a second seal ready for later service. It is less useful when selection depends on published bore or outer-diameter measurements.

Listed on Amazon as: 2 Pack Rear Wheel Seal Drive Replaces 47691

#3 · Broad Cross-References

3. Langzeze 47697 Seal

• Weight: 14.1 oz
• Package Dimensions: 6.81 x 6.49 x 2.16 in

Best for: Broad rear-seal cross-reference.

Why it ranks #3: Its listing identifies a four-piece rear seal set and an extensive replacement-number list, including 47691, 47692, and 393-0273.

Langzeze’s four-piece rear wheel seal set lists an unusually broad replacement-number range, including 47697, 47691 and 47692, alongside fitment for Freightliner, Kenworth, Peterbilt, Navistar and Volvo semi trucks. That breadth can simplify parts research when an existing seal number, rather than a single make, drives the search.

The stated direct-replacement fitment names International, Freightliner, Peterbilt, Kenworth, Mack, Chevrolet and GMC, while the title also references Freightliner, Kenworth, Peterbilt, Navistar and Volvo. The extensive replacement list, including 47697, 47691 and 47692, gives a buyer multiple numbers to compare with service records or the removed seal. Four pieces support stocking several replacements. The listing does not provide dimensional measurements in the supplied specifications.

Skip it if you need published bore or shaft measurements before ordering; QUCpona’s 46305 seal lists both bore and shaft specifications.

This pack suits a fleet or parts department working from one of Langzeze’s listed rear-seal references across the named truck makes. Buyers who select by measured dimensions should note those measurements are not supplied here.

Listed on Amazon as: 4 Pcs 47697 Rear Wheel Seal (Replaces SKF 47697 47691 47692 & Stemco 393-0173) Replacement for Freightliner Kenworth Peterbilt Navistar Volvo semi Trucks

#4 · Dimension-Specified

4. QUCpona 46305 Seal

• Weight: 12.2 oz
• Package Dimensions: 6.3 x 6.3 x 1.36 in

Best for: Measured 46305 drive fit.

Why it ranks #4: This four-pack lists a 6.3-inch outer diameter, 1.03-inch width, and 4.7660-inch shaft, plus a drive application and SKF 46305 reference.

QUCpona publishes a 4.7660-inch shaft specification alongside a 6.3-inch outer diameter and bore for its drive-application 46305 seal. Those measurements give a buyer concrete dimensions to compare during parts selection, while the stated SKF 46305 replacement reference and truck make list help narrow the intended replacement use.

The listed drive application, 1.03-inch width and 6.3-inch outer diameter and bore provide several dimensions for assessing the wheel-end requirement before installation. A 4.7660-inch shaft specification adds another selection reference. QUCpona calls it a direct OEM replacement for International, Freightliner, Peterbilt, Kenworth, Mack, Chevrolet and GMC semi trucks, and identifies SKF 46305 as the replacement reference. Its automotive-grade rubber is described as resisting heat, wear and harsh chemicals.

Skip it if you need a trailer-application seal rather than the listed drive-application part; Torque’s Trailer Wheel Seal is identified for trailer use.

This four-pack suits a shop servicing drive wheel ends on the listed truck makes and selecting against published dimensions. Buyers should keep its drive application distinct from trailer-seal requirements.

Listed on Amazon as: 4 Pack of QUCpona 46305 Wheel Seal

#5

5. HUDEX 373-0143 Seal

Best for: Four-piece cross-reference set.

Why it ranks #5: The four-piece set lists compatibility with Freightliner, Peterbilt, and Mack, replacement references including SKF 46300, and a one-year warranty description.

HUDEX supplies four wheel seals and names a broad replacement set, including SKF 46305, 42626 and 46300, plus Stemco 373-0143 and Timken K154146. That cross-reference range gives truck maintainers several catalog numbers to check across Freightliner, Peterbilt, Mack and other semi-truck applications.

The four-piece quantity can serve multiple repairs or provide shop stock, while the listed 6-inch compatible groove diameter offers a concrete dimension for part selection. HUDEX identifies alloy steel and metal as materials and separately describes an oil-resistant nitrile fortified compound, tying its material information to oil exposure at the wheel end. The title lists several replacement standards and compatibility with Freightliner, Peterbilt and Mack, but the supplied facts also describe fit as suitable for most brand trucks rather than specifying every model.

Skip it if you require model-by-model fitment detail; Torque’s driver-steer seal listing names specific compatible truck makes and cross-reference numbers.

This set fits shops seeking four seals and checking a 6-inch groove specification alongside the listed replacement references. Buyers who need exact vehicle-model coverage should weigh the broad fitment wording before selection.

Listed on Amazon as: Classic Wheel Seal – Compatible with Freightliner, Peterbilt, Mack & Semi Trucks- Replaces SKF 46305/42626/46300,Stemco 373-0143,Timken K154146,Meritor MER0143/MER0243-4pcs

#6 · Steer-Axle Pick

6. Torque TR35066

• Weight: 2.35 lb
• Package Dimensions: 13.78 x 6.57 x 3.15 in

Best for: Cross-reference steer-seal pack.

Why it ranks #6: This four-pack is identified as a driver steer wheel oil seal and lists SKF 35058 and 35066 along with multiple semi-truck makes.

Torque’s four-pack combines a driver-steer oil seal designation with extensive replacement cross-references, including SKF 35058 and 35066 and Stemco 383-0136. That reference coverage gives parts buyers several recognized numbers to check when sourcing a replacement for compatible International, Freightliner, Peterbilt, Kenworth, Mack, Chevrolet or GMC semi trucks.

The listed driver-steer application distinguishes this seal from drive-axle and trailer choices, helping buyers focus their search on the steering wheel end. Its cross-reference set spans SKF, Stemco, Navistar, Freightliner, GMC and Mack numbers, offering multiple catalog routes for identifying the needed replacement. The four-piece quantity can support several service needs or shelf stock. The product information also carries a California Proposition 65 warning concerning possible lead exposure.

Skip it if you need a trailer seal; Torque’s Trailer Wheel Seal Replacement for Meritor A1205G2191 is specifically listed for trailer application.

This pack is suited to parts counters and fleets sourcing a driver-steer seal through cross-reference numbers for the named truck makes. Treat the stated steer application and Proposition 65 warning as relevant selection considerations.

Listed on Amazon as: Torque Driver Steer Wheel Oil Seal Replacement for SKF 35066 4 Pack

#7

7. ANODZU TR35066

• Weight: 1.84 lb
• Package Dimensions: 5.1 x 5.1 x 3.14 in

Best for: 35066 steer-seal cross-check.

Why it ranks #7: The four-piece listing identifies a steer oil seal and cross-references SKF 35058 and 35066, with fitment details for several truck makers.

ANODZU’s four-piece classic wheel seal set centers on the driver-steer 35066/35058 cross-reference family, including SKF 35066 and Stemco 383-0136. Its listed compatibility with Freightliner, Peterbilt, Kenworth, Mack, Chevrolet and GMC semi trucks helps parts buyers connect the replacement numbers to stated truck applications.

The product identifies a driver-steer oil-seal use and lists SKF 35058 and 35066 plus Stemco 383-0136 and 3830136, giving technicians several cross-reference points for parts identification. Its fitment information names multiple truck makes and includes additional references for brands such as Bluebird and ConMet. Four seals support stocking or repeated service needs. Package dimensions are listed as 5.1 by 5.1 by 3.14 inches, while no seal dimensions are stated in the supplied facts.

Skip it if you select by listed seal dimensions; QUCpona’s 46305 drive seal provides outer diameter, bore, width and shaft measurements.

This option suits a shop looking for a four-piece driver-steer set and matching the named cross-reference family. It is a weaker fit for selection workflows that depend on published bore, shaft or outside-diameter measurements.

Listed on Amazon as: 4Pcs Classic Wheel Seal Driver Steer Oil Seal Fit for Eaton, Ford, Freightliner, Kenworth, Meritor, Navistar, Peterbilt, Volvo, Trucks Replaces SKF 35066 35058 Stemco 383-0136, 4 x TR35066

#8

8. REVHD RM-T03

• Weight: 1.01 lb
• Package Dimensions: 6.81 x 6.73 x 0.67 in

Best for: Tapered-spindle trailer service.

Why it ranks #8: This trailer seal is specifically listed for a tapered spindle and names replacement references 373-0243, 380025A, and 46300.

The tapered-spindle designation is the key selection detail for REVHD’s RM-T03 trailer seal, identifying the spindle style it is intended to fit. Its title also names 373-0243, 380025A and 46300 as fit references, giving trailer technicians several specific numbers to compare against the part being replaced.

RM-T03 is identified as a trailer axle tapered wheel seal, so its stated application helps separate it from drive-axle and driver-steer choices during parts selection. The title’s 373-0243, 380025A and 46300 references provide concrete replacement checks for a service job. The listed package dimensions are 6.81 by 6.73 by 0.67 inches and item weight is 1.01 pounds, useful for handling and storage planning, not confirmation of wheel-end fit.

Skip it if you need a drive-axle seal; REVHD’s RM-D02 Rev Max Drive Seal is the separately identified drive-axle option.

This is a focused option for a trailer repair where a tapered spindle and one of the named reference numbers match the service requirement. Buyers needing material or dimensional specifications will find those details absent from the listing.

Listed on Amazon as: RM-T03 Rev Max Trailer Seal for Tapered Spindle (Fits: 373-0243, 380025A, 46300)

#9

9. Torque Trailer Seal

• Weight: 3.64 lb
• Package Dimensions: 6.6 x 6.4 x 5 in

Best for: Trailer cross-reference pack.

Why it ranks #9: The four-pack is labeled for trailer use and lists Meritor A1205G2191 and National 380025A replacement references.

Torque’s four-pack is explicitly identified for trailer application and lists Meritor A1205G2191 among its replacement references. Additional Meritor, National, Eaton, GMC, Hendrickson and Navistar numbers give fleet parts staff several specific catalog paths for identifying a trailer wheel seal.

The trailer application helps keep this seal distinct from drive and driver-steer options during parts selection. Its replacement list spans Meritor, National and Eaton references, with further numbers for GMC, Hendrickson, Navistar and NOK, supporting cross-checks against existing service records. Four seals provide multiple units for shop inventory or service needs. The product information includes a California Proposition 65 warning concerning possible lead exposure, which buyers may want to consider when handling or selecting the part.

Skip it if you need a driver-steer seal; Torque’s Driver Steer Wheel Oil Seal Replacement is listed for that wheel-end application.

This set is suited to trailer maintenance teams matching one of the listed Meritor, National, Eaton or other references. Keep its stated trailer application and the Proposition 65 warning in view when choosing.

Listed on Amazon as: Torque Trailer Wheel Seal Replacement for Meritor A1205G2191 4 Pack

#10

10. Mytee 370025A Seal

• Weight: 9.48 lb
• Package Dimensions: 18 x 18 x 18 in

Best for: Bulk long-life seal inventory.

Why it ranks #10: This 12-pack lists long-life seal-lip construction and replacement references 370025A, Bendix 370025AFDM, and National RNT370025A.

Mytee Products packages twelve wheel seals and describes a long-life seal lip that performs with all TMC-recognized hub lubricants. That combination supports maintenance operations seeking multiple replacements on hand while using varied recognized hub lubricants, and the listed replacement references include 370025A, Bendix 370025AFDM and National RNT370025A.

The twelve-piece pack provides a substantial quantity for fleet or shop inventory, reducing the need to source each replacement separately during planned service. Mytee identifies a long-life seal lip and compatibility with all TMC-recognized hub lubricants, which gives lubricant selection a stated compatibility boundary. The supplied replacement references—370025A, Bendix 370025AFDM and National RNT370025A—offer concrete catalog checks. The listing does not specify a truck make or dimensional measurements in the provided facts.

Skip it if you need only one replacement seal; this listing supplies twelve pieces, while REVHD’s RM-D02 is listed as a single drive-seal model.

This bulk pack suits fleet shops stocking the listed replacement family and using TMC-recognized hub lubricants. Buyers should account for its twelve-piece quantity and the absence of supplied vehicle-specific fitment or dimensions.

Listed on Amazon as: Mytee Products 12 Pack Wheel Seal Long Life Seal Lip Performs w/All TMC Recognized Hub Lubricants Replaces 370025A, Bendix 370025AFDM, National Seal RNT370025A