Best Torsion Axle Lift Kit for Trailer Clearance

#1 · Best Overall

1. Veresen K71-707-01

Best for: Single #10 Torflex replacement.

Why it ranks #1: Specifies a Dexter Torflex #10, 3,500-pound single axle, 2-5/8-inch lift, 8-inch hole spacing, and a detailed hardware list.

A 2-5/8-inch lift specified for a single #10, 3,500-pound Dexter Torflex axle makes this Veresen kit a focused replacement option. Its 8-inch on-center holes and listed spacer-and-fastener quantities help buyers assess fit and installation needs.

The single-axle designation separates this kit from tandem versions, while its #10, 3,500-pound Dexter Torflex specification identifies the intended rating and application. Eight-inch on-center holes provide a mounting reference. The listed contents include two frame spacers, 16 washers, eight locking hex nuts, and eight 1-1/2-inch hex-head bolts; together, these parts support the stated mounting task. A 2-5/8-inch lift is the specified rise, giving buyers a concrete clearance change to weigh against their trailer setup.

Skip it if you need a tandem-axle kit; this listing specifies a single trailer axle and its matching hardware quantities.

This Veresen kit suits a buyer replacing a single #10, 3,500-pound Dexter Torflex lift assembly and seeking a 2-5/8-inch rise. Check that single-axle application and 8-inch hole spacing match your setup.

Listed on Amazon as: K71-707-01 For Dexter Torflex Lift Kit #10 3500# -Single Trailer Axle

#2 · Best #11 Fit

2. Generic K71-724-01

Best for: #11 single-axle fit check.

Why it ranks #2: Lists a #11, 5,200-pound single axle and 2-7/8-inch lift, with top and side mounting-hole spacing provided.

A 2-7/8-inch lift for a 5,200-pound, #11 single axle gives this kit a narrowly defined use: raising a compatible Dexter Torflex trailer. Its separate top and side hole measurements make bracket geometry a practical part of the fit check.

The #11, 5,200-pound rating and single-axle designation identify the intended torsion setup, while the stated Dexter compatibility narrows the application further. For installation planning, the top holes are 9 inches center to center and side holes are 9.5 inches center to center; the top bracket is 2.5 inches wide and the axle bracket is 11 inches long. These measurements give a buyer specific dimensions to compare with existing mounting points before committing to the 2-7/8-inch lift.

Skip it if you need a tandem-axle kit or an application other than the listed #11, 5,200-pound single-axle setup.

Consider this kit for a Dexter Torflex #11 single axle rated at 5,200 pounds when its 2-7/8-inch rise suits the clearance goal. Compare the listed hole spacing and bracket dimensions with your trailer.

Listed on Amazon as: K71-724-01 Fits For DEXTER Torflex Lift Kits #11 5200# Single Axle 2-7/8" Torsion Axle Lift Kit – Trailer Lift Kit Replacement

#3 · Best Spec Clarity

3. Generic TAL-Kit-5200lb

Best for: Heavy single-axle clearance.

Why it ranks #3: Clearly identifies Dexter Torflex single-axle #11 fit, 5,200-pound rating, and 2-7/8-inch lift.

A 2-7/8-inch lift matched to a 5,200-pound Dexter Torflex single axle defines this kit’s main job: adding clearance on that specific trailer setup. The #11 identifier offers an additional reference when matching the replacement kit to an existing axle.

The listing connects its 2-7/8-inch rise with Dexter Torflex single-axle trailers rated for 5,200 pounds, so buyers can assess both intended application and clearance change together. Its #11 designation supplies a further compatibility reference for selecting the correct kit. Steel is the listed material, and the included component is identified as a torsion axle lift kit. The supplied details do not give mounting-hole measurements or enumerate fasteners, so installation planning depends on confirming those specifics separately.

Skip it if you need published hole spacing or a detailed fastener inventory before planning installation; those details are not supplied here.

This kit fits buyers seeking a 2-7/8-inch rise for a 5,200-pound Dexter Torflex single axle identified as #11. Treat the missing mounting dimensions and fastener list as a boundary when planning the job.

Listed on Amazon as: Torsion Axle Lift Kit for Dexter Torflex Single Axle Trailers, 2-7/8 in Lift, 5200 lb, #11

#4 · Highest Capacity

4. YllJYK K-71-725-02

Best for: #12 tandem axle lift.

Why it ranks #4: Targets the #12, 7,000-pound tandem axle and specifies a 3-1/8-inch lift plus 9-inch and 9.5-inch hole spacing.

A 3-1/8-inch lift for a #12, 7,000-pound tandem Torflex application gives this YllJYK kit a clear heavy-axle niche. Its stated top and side mounting measurements help buyers compare bracket geometry before arranging the installation.

The listing identifies a #12 replacement for a 7,000-pound tandem axle, with a 3-1/8-inch lift. That combination helps buyers target a specific axle class and assess the intended clearance increase. The top mounting holes are 9 inches center to center, while side holes are 9.5 inches center to center; the top bracket is 2.5 inches wide and the axle bracket is 12 inches long. These dimensions support a more informed fit check, although the supplied information does not enumerate the included fasteners.

Skip it if you have a single axle or need a different rating; this kit is listed for a #12, 7,000-pound tandem application.

Choose this YllJYK kit when replacing a #12 tandem Torflex setup rated at 7,000 pounds and seeking a 3-1/8-inch lift. Compare the listed hole spacing and bracket dimensions against your mounting arrangement.

Listed on Amazon as: K-71-725-02 Replace for Dexter Torflex #12 Lift Kit 7000# Axle 3-1/8 inch

#5 · Best Tandem #10

5. YllJYK K71-707-02

Best for: #10 tandem axle replacement.

Why it ranks #5: Lists a #10, 3,500-pound tandem axle, 2-5/8-inch lift, 8-inch hole spacing, and a detailed set of mounting hardware.

A 2-5/8-inch lift paired with an #10, 3,500-pound Dexter Torflex application makes this YllJYK kit relevant to a specific tandem-axle replacement. Its 8-inch hole spacing and supplied frame spacers help identify the mounting arrangement and installation hardware up front.

The listing identifies a tandem trailer axle rated at 3,500 pounds and a #10 Dexter Torflex replacement, giving buyers concrete application details to compare with their existing setup. Eight-inch on-center axle holes provide another fit reference. The kit includes four #10 frame spacers, 24 washers, 16 locking hex nuts, and 16 bolts measuring 1-1/2 inches long, so the listed hardware supports a complete mounting workflow without sourcing those pieces separately. The stated lift is 2-5/8 inches.

Skip it if you have a single axle or a different Torflex rating; this listing specifies a #10, 3,500-pound tandem application.

This YllJYK kit suits a buyer replacing a #10, 3,500-pound tandem Torflex lift assembly who needs a 2-5/8-inch rise and the listed mounting hardware. Its tandem specification is the key fit boundary.

Listed on Amazon as: K71-707-02 For Dexter Torflex Lift Kit #10 3500# Trailer Axle – 2-5/8 inch

#6

6. Cindervane K71-707-01

Best for: Single-axle clearance upgrade.

Why it ranks #6: Claims compatibility with single torsion axles rated 2,300 to 4,000 pounds and #9 through #12, with an approximately 3-inch lift.

A roughly 3-inch lift gives this Cindervane kit a clear purpose: adding ground clearance to a compatible RV or trailer with a single torsion axle. Its stated 2,300-to-4,000-pound range and side-mounted bracket application help narrow the fit before you plan the installation.

The 3-inch lift is intended to create more room beneath the trailer, which can help when uneven roads make clearance a concern. Compatibility is specified for single torsion axles rated from 2,300 to 4,000 pounds, and for side-mounted axle brackets, so both details matter when checking an existing setup. The kit includes lift spacers, bolts, washers, and locking nuts; having those listed hardware pieces together supports a more straightforward installation workflow, though the supplied information does not specify a hole spacing.

Skip it if you have a tandem axle or a rating outside 2,300–4,000 pounds; this kit is specified for single axles in that range.

Choose this Cindervane kit if your RV or trailer has a single, side-mounted torsion axle within the stated rating range and you want about three inches of added clearance. Verify the axle application before installation.

Listed on Amazon as: Torflex Lift Kit for RV Trailers, K71-707-01,Fits #9#10#11#12 Axles

#7

7. YllJYK K71-724-02

Best for: 5,200-pound Torflex fit.

Why it ranks #7: Identifies a Dexter Torflex 5,200-pound application and provides 9-inch and 9.5-inch mounting-hole spacing, but omits lift height.

A 5,200-pound Dexter Torflex application paired with 9-inch and 9.5-inch mounting measurements gives this YllJYK kit useful fit references. The K71-724-02 identification helps target a specific replacement, while its listed steel construction addresses demanding trailer use.

The listing identifies a K71-724-02 kit for a 5,200-pound Dexter Torflex application and gives both 9-inch and 9.5-inch hole measurements, supporting a more specific bracket fit check. Premium-grade steel and reinforced components are cited for durability under demanding loads, connecting material construction to the trailer’s operating conditions. The description also mentions reducing trailer sway, though it supplies no measurement for that claim. The listed details do not state a lift height, so buyers should not assume a particular clearance increase.

Skip it if you need a stated clearance increase before choosing a kit; this listing gives no lift-height measurement.

This YllJYK kit suits a buyer matching a K71-724-02, 5,200-pound Dexter Torflex application who can use the listed hole measurements. The missing lift height is a key boundary for clearance-focused plans.

Listed on Amazon as: K71-724-02 Torsion Axle Lift Kit, for DEXTER Torflex Lift 5200#

#8

8. TXINGMENG LC270682

Best for: Diamond axle tire clearance.

Why it ranks #8: Offers a clearly stated 3-1/2-inch lift for 4,400-pound Diamond torsion axles, with 9-inch hole spacing and included fasteners.

A 3-1/2-inch riser for a 4,400-pound Diamond torsion axle provides this kit’s defining benefit: more space between frame and axle for ground clearance or larger tires. Its 9-inch hole spacing gives a concrete mounting reference.

Compatibility is specified for a 4,400-pound Diamond torsion axle, with matching references LC270682, 164888, and 164882. The 3-1/2-inch lift can add clearance beneath the trailer and room for larger tires, as stated in the product details. Nine-inch center-to-center holes help with alignment, and the package lists two risers, 16 zinc-plated 5/8-inch USS washers, eight 5/8-11 hex nuts, and eight Grade 5 cap screws. The supplied fasteners support a direct bolt-on installation workflow.

Skip it if you have a different axle type or rating; this kit is specified for 4,400-pound Diamond torsion axles.

This TXINGMENG riser kit suits a 4,400-pound Diamond torsion axle owner seeking added ground or tire clearance and the listed bolt-on hardware. Its axle type and rating are the essential fit boundaries.

Listed on Amazon as: LC270682 Axle Riser Kit 4400# Torsion Axle 3.5" Lift 9" Hole Spacing

#9

9. EWESD Lift Kit #10

Best for: Basic #10 lift reference.

Why it ranks #9: Lists a #10, 3,500-pound single-axle application, 2-5/8-inch lift, and 8-inch hole spacing, but provides few hardware details.

An advertised 2-5/8-inch lift and 8-inch hole spacing are the two concrete details that define this EWESD listing. They let a buyer assess a basic #10, 3,500-pound single-axle lift application against the trailer’s required rise and mounting pattern.

The product description states that the kit raises the trailer height by 2-5/8 inches between the frame and axle, offering a specific clearance change to evaluate. It also lists 8-inch on-center holes, which provide a mounting measurement for comparison with the existing setup. The title identifies a #10, 3,500-pound single trailer axle application. Beyond those details, the supplied listing provides little information about materials, included hardware, or installation contents, so those points remain important limits for purchase planning.

Skip it if you require a detailed hardware list or material specification; those installation details are not provided in this listing.

This EWESD listing may suit a buyer whose #10, 3,500-pound single axle needs a stated 2-5/8-inch rise and 8-inch hole spacing. Its sparse hardware and material details limit installation planning.

Listed on Amazon as: Lift Kit #10 3500# -Single Trailer Axle – 2-5/8" Lift Torsion

#10

10. Dexter Axle Torflex Kit

Best for: Double-eye spring hanger setup.

Why it ranks #10: Its description identifies a spring hanger kit for double-eye springs rather than a torsion axle lift kit, so it does not fit the search use case.

A single-axle hanger kit for double-eye springs is the defining detail here, enabling attachment of trailer springs to the frame rather than specifying a torsion-axle lift. It includes a bushing, making it more relevant to spring-hanger work than a conventional Torflex riser search.

The product description identifies a hanger kit for double-eye springs and says it contains what is needed to attach trailer springs to the frame. That points to a spring-suspension installation workflow, not a stated torsion-axle lift application. The included bushing is a useful component for that listed hanger setup, while alloy steel is the specified material. Because no lift height, torsion rating, or torsion mounting dimensions are supplied, buyers should distinguish this product from kits that raise a Torflex axle.

Skip it if you need a specified Torflex lift height; this listing is for attaching double-eye springs to a trailer frame.

This DEXTER AXLE item suits someone working on a single-axle, double-eye spring hanger installation who needs a frame attachment kit with a bushing. It is not the right match when a torsion-axle lift is required.

Listed on Amazon as: DEXTER AXLE Torflex Lift Kit