Best Tailgate Ramps For Pickups: Compare 10 Loading Ramps

Best Tailgate Ramps For Pickups

A strong pickup tailgate ramp matches your equipment’s wheel spacing, reaches the truck bed at a manageable slope, and has enough rated capacity for the load. This roundup compares wide tri-fold platforms with pairs of narrower ramps, including aluminum and alloy-steel options for motorcycles, ATVs, mowers, and similar equipment. The listed capacities range from 750 pounds for a single ramp to 1,900 pounds for a pair, but those figures are not interchangeable: check whether a rating applies to one ramp or the whole set.

Ramp length and width also vary substantially, affecting fit, storage, and loading approach. Before choosing, confirm your truck’s tailgate height, the equipment’s weight and wheel track, and how the ramp attaches to the tailgate.

The picks below are ranked for pickup loading, with those practical differences in mind.

VNN 77-Inch Tri-Fold Ramp leads for pickup loading because its 77-by-54-inch aluminum platform is designed for a truck, has a listed 1,600-pound capacity, and combines a punch-plate surface with rubber-coated fingers. Its broad format suits equipment that needs a continuous platform rather than two separate wheel tracks. If you prefer a pair of ramps, compare the listed per-pair capacity and dimensions carefully: several options are rated at 1,500 pounds, while WheelX lists 1,900 pounds.

Our Top Picks

VNN 77-Inch Tri-Fold RampBest Overall

VNN 77-Inch Tri-Fold Ramp

Its 77-by-54-inch aluminum platform is pickup-focused, rated for 1,600 pounds, and uses punch-plate traction with rubber-coated tailgate fingers.

View on Amazon
VEVOR 76-Inch Tri-Fold RampWide Platform

VEVOR 76-Inch Tri-Fold Ramp

The 76.2-by-53.9-inch aluminum-alloy platform provides a broad loading surface, straps, non-slip rubber fingers, and a 1,500-pound set capacity.

View on Amazon
GarveeTech 76-Inch Tri-Fold RampSingle-Platform Pick

GarveeTech 76-Inch Tri-Fold Ramp

This 76.38-by-49.61-inch aluminum ramp is a folding single surface for pickup loading, with treads and a listed 1,500-pound capacity.

View on Amazon

Compare Pickup Ramp Types, Capacities, and Fits

#ProductDimensionsWeightLoad CapacityMaterialBuy
177"L x 54"W x 2"H—1600 lbAluminumView on Amazon
276.2"L x 53.9"W x 1.7"H50.9 lb1500 lbAluminum Alloy (Grade: 6061-T6)View on Amazon
376.38"L x 49.61"W x 1.97"H38.7 lb1500 lbAluminumView on Amazon
445"L x 15"W x 11.31"H40 lb1.9E+3 lbAluminumView on Amazon
5
VENDAV Folding Aluminum Ramps5. VENDAV Folding Aluminum RampsDual-track ATV haulers
89"L x 12"W x 1.9"H34 lb1500 lbAluminumView on Amazon
6
MAXIVAMN Aluminum Ramps6. MAXIVAMN Aluminum RampsEveryday two-track loaders
89"L x 12"W x 2"H14.4 kg1500 lbAluminumView on Amazon
7
Arejonner Steel Ramps7. Arejonner Steel RampsSteel Construction
72.5"L x 8.7"W x 1.8"H34.1 lb1500 lbAlloy SteelView on Amazon
8
Evcitn 75-Inch Ramps8. Evcitn 75-Inch RampsTextured-surface mower loaders
78.7"L x 47.2"W x 7.5"H36.4 lb1500 lbIron, Metal, Plastic, Stainless SteelView on Amazon
9
Arejonner Sandblasted Ramps9. Arejonner Sandblasted RampsStrap-equipped steel ramp pair
71"L x 8.86"W x 3.5"H34.1 lb1500 lbAlloy SteelView on Amazon
10
Generic 78-Inch Steel Ramp10. Generic 78-Inch Steel RampSingle-track motorcycle loaders
78"L x 9"W x 1.97"H—750 lbAlloy SteelView on Amazon

Detailed Reviews: Best Tailgate Ramps For Pickups

VNN 77-Inch Tri-Fold Ramp

#1 · Best Overall

1. VNN 77-Inch Tri-Fold Ramp

  • Dimensions: 77"L x 54"W x 2"H
  • Load Capacity: 1600 lb
  • Material: Aluminum

Best for: Wide tailgate-protection ramp.

Why it ranks #1: Its 77-by-54-inch aluminum platform is pickup-focused, rated for 1,600 pounds, and uses punch-plate traction with rubber-coated tailgate fingers.

Soft rubber-coated fingers give the VNN ramp a tailgate-contact feature intended to grip securely while helping prevent scratches or scuffs. Its 77-by-54-inch aluminum platform has a punch-plate surface for traction in wet or muddy conditions and a stated 1,600-pound capacity for broad pickup loading.

The 54-inch width creates a broad path for loading a motorcycle or other equipment, while the punch-plate surface is specified to maintain traction in wet or muddy conditions. Rubber-coated fingers contact the tailgate, helping protect the vehicle finish while securing the ramp. Aluminum is the listed material, and the stated 1,600-pound capacity sets its load limit. The product title identifies a tri-fold design, which supports more compact storage than leaving the full 77-by-54-inch platform extended.

Pros
  • 77-by-54-inch wide loading surface
  • 1,600-pound stated capacity
  • Punch-plate surface specified for wet or muddy traction
  • Rubber-coated fingers grip the tailgate and help prevent scuffs
Cons
  • The 77-by-54-inch platform is a broad piece to position at the tailgate.

Skip it if you need a listed loading-height range for setup planning; VEVOR’s UT-6803-4 specifies 3.9 to 31.5 inches.

This ramp suits pickup owners who want a wide loading platform with tailgate-protecting contact points and a traction-focused surface. Its broad dimensions call for adequate space to position the ramp at the truck.

Full product details
BrandVNN
ColorSilvery
Dimensions77"L x 54"W x 2"H
Load Capacity1600 Pounds
ManufacturerVNN
Part NumberLR-01
Manufacturer Warranty Description1 year manufacturer.
MaterialAluminum
Model Number77"L*54"W

Listed on Amazon as: Tri-fold Motorcycle Ramp for Pickup Truck, 77L x54 W Aluminum Loading Ramp

View on Amazon
VEVOR 76-Inch Tri-Fold Ramp

#2 · Wide Platform

2. VEVOR 76-Inch Tri-Fold Ramp

  • Dimensions: 76.2"L x 53.9"W x 1.7"H
  • Weight: 50.9 lb
  • Load Capacity: 1500 lb
  • Material: Aluminum Alloy (Grade: 6061-T6)

Best for: Wide tri-fold loading platform.

Why it ranks #2: The 76.2-by-53.9-inch aluminum-alloy platform provides a broad loading surface, straps, non-slip rubber fingers, and a 1,500-pound set capacity.

A 53.9-inch-wide tri-fold platform gives the VEVOR ramp a broad surface for loading cars, motorcycles, ATVs, mowers, and snow blowers. Its extended 76.2-inch length is specified to create a gentler slope, and the set’s 1,500-pound capacity comes from three aluminum ramps rated at 500 pounds each.

The unfolded 76.2-by-53.9-inch platform gives tires a wide loading area, reducing the chance of slipping off an edge according to the product description. Its tri-fold construction compacts for storage, while straps and non-slip rubber fingers are included to support securing the ramp at the vehicle. The listed recommended height range is 3.9 to 31.5 inches. At 50.9 pounds, the set is notably substantial to handle when unfolding, positioning, or putting away.

Pros
  • Wide 53.9-inch platform when unfolded
  • Tri-fold construction for compact storage
  • Three ramps rated 500 pounds each, 1,500 pounds total
  • Straps and non-slip rubber fingers included
Cons
  • The 50.9-pound set is heavy to lift and position.

Skip it if you need a lighter two-ramp set with separate wheel tracks; VENDAV’s 34-pound pair has two 89-inch ramps.

This ramp suits buyers who want a wide platform and folding storage for loading equipment or cars. Its 50.9-pound weight and recommended 3.9-to-31.5-inch height range are key handling and setup considerations.

Full product details
BrandVEVOR
ColorWhite
Dimensions76.2"L x 53.9"W x 1.7"H
Item Weight50.9 pounds
Load Capacity1500 Pounds
ManufacturerVEVOR
Part NumberUT-6803-4
MaterialAluminum Alloy (Grade: 6061-T6)
Model NumberUT-6803-4

Listed on Amazon as: VEVOR Aluminum Trailer Ramps, 76 x 54 in Tri-Folding Truck Ramps with Straps & Non-Slip Rubber Fingers, 1500LBS Capacity ATV Loading Ramps for Pickup Trucks, Motorcycles, Lawn Mowers, Tractors, Carts

View on Amazon
GarveeTech 76-Inch Tri-Fold Ramp

#3 · Single-Platform Pick

3. GarveeTech 76-Inch Tri-Fold Ramp

  • Dimensions: 76.38"L x 49.61"W x 1.97"H
  • Weight: 38.7 lb
  • Load Capacity: 1500 lb
  • Material: Aluminum

Best for: Wide-platform pickup loaders.

Why it ranks #3: This 76.38-by-49.61-inch aluminum ramp is a folding single surface for pickup loading, with treads and a listed 1,500-pound capacity.

A 49.61-inch-wide single surface gives the GarveeTech ramp a broad loading path for pickup beds, while its aluminum construction keeps the stated weight to 38.7 pounds. Its tri-fold format folds to one-third size, making this a practical option for buyers who want a wide ramp that can be stored more compactly.

The 76.38-by-49.61-inch ramp provides a continuous surface rather than separate wheel tracks, which can simplify positioning equipment for loading. Treads offer a gripped surface, and load straps are included to help secure the ramp. Its 1,500-pound capacity covers the combined load rating stated for the ramp, while folding to one-third size reduces its storage footprint. The aluminum construction and 38.7-pound weight are relevant when moving it between the truck and storage area.

Pros
  • Wide 49.61-inch single ramp surface
  • Tri-fold design reduces folded size to one-third
  • Aluminum construction with a 1,500-pound stated capacity
  • Treads and load straps are specified
Cons
  • At 38.7 pounds, it is a substantial ramp to lift and position.

Skip it if you need two independently positioned wheel tracks; VENDAV’s 89-inch two-ramp set is specified for dual-track loading.

Pickup owners seeking a broad, folding surface for ATVs, motorcycles, mowers, or similar equipment may appreciate this format. Account for its 38.7-pound weight when lifting it, and use the included straps to secure it.

Full product details
BrandGarveeTech
ColorSilver-
Dimensions76.38"L x 49.61"W x 1.97"H
Item Weight38.7 pounds
Load Capacity1500 pounds
ManufacturerGarveeTech
Part NumberC0BQwq5bJxJ7hjh1qVhFTAIId11H
MaterialAluminum
Model NumberC0BQwq5bJxJ7hjh1qVhFTArl7O1l

Listed on Amazon as: Aluminum Tri-Fold Ramp with Treads, Ramps for Pickup Trucks 76"x50"

View on Amazon
WheelX Aluminum Loading Ramps

#4 · Highest Capacity

4. WheelX Aluminum Loading Ramps

  • Dimensions: 45"L x 15"W x 11.31"H
  • Weight: 40 lb
  • Load Capacity: 1.9E+3 lb
  • Material: Aluminum

Best for: Higher-capacity paired ramps.

Why it ranks #4: The pair is listed at 1,900 pounds and includes load straps; its 7.5-foot description suits buyers prioritizing capacity for wheeled equipment.

A stated 1,900-pound capacity sets the WheelX pair apart for buyers loading heavier ATVs, UTVs, tractors, mowers, or motorcycles. Its aluminum construction combines a widened main beam with double-thickness design and a 3D convex surface, features intended to support load distribution and smoother uphill transitions.

The pair’s 1,900-pound rating gives buyers a higher listed capacity than many 1,500-pound ramp sets, while the widened main beam is specified to increase load distribution and stability. A 3D convex surface supports smoother uphill transitions, and fish-scale welding is cited for structural integrity. The ramps include a strap anchor point for added security during loading. Aluminum construction helps keep the set’s listed weight to 40 pounds, though that remains a substantial lift for setup.

Pros
  • 1,900-pound stated capacity for the pair
  • Widened main beam specified to improve load distribution
  • 3D convex surface intended for smoother uphill transitions
  • Strap anchor point and aluminum construction
Cons
  • The 40-pound set requires a substantial lift during setup and storage.

Skip it if you prioritize a lighter two-ramp set for occasional loading; MAXIVAMN’s aluminum pair is listed at 14.4 kilograms.

The WheelX pair suits owners moving heavier wheeled equipment who want a higher stated capacity and a strap anchor. Its 40-pound weight and two-ramp format matter when planning handling and wheel-track placement.

Full product details
BrandWheelX
ColorSilver
Dimensions45"L x 15"W x 11.31"H
Item Weight40 pounds
Load Capacity1.9E+3 pounds
ManufacturerWheelX
Part NumberPDYD2-AMZ01
MaterialAluminum
Model Number1900LBS

Listed on Amazon as: Aluminum Loading Ramps, 1900Lbs Capacity, 7.5ft Trunk Ramps for Pickup Trucks, Trailers Ramp with Load Straps for ATV/UTV, Lawn mowers,Tractors, Motorcycles, 91" L x 11.4" W, 2Pcs

View on Amazon
VENDAV Folding Aluminum Ramps

#5

5. VENDAV Folding Aluminum Ramps

  • Dimensions: 89"L x 12"W x 1.9"H
  • Weight: 34 lb
  • Load Capacity: 1500 lb
  • Material: Aluminum

Best for: Dual-track ATV haulers.

Why it ranks #5: Two 89-by-12-inch ramps suit ATV and UTV wheel tracks, with a 1,500-pound-per-pair rating and 750 pounds per ramp when evenly loaded.

Two separate 89-inch aluminum ramps let the VENDAV set match the wheel spacing of an ATV, UTV, riding mower, or garden tractor. The pair is rated for 1,500 pounds with even load distribution, giving pickup and trailer owners individual paths to position beneath each side of their equipment.

Each ramp measures 89 by 12 inches and provides an approximately 11-inch wheel path between its side rails, helping keep tires centered during loading. Because the ramps are separate, buyers can adjust their spacing for different vehicle wheel tracks rather than using a single wide platform. The stated 1,500-pound rating applies to the pair, with up to 750 pounds on each ramp when evenly distributed. Aluminum construction keeps the 34-pound set manageable for occasional transport and storage.

Pros
  • Two ramps allow spacing to match equipment wheel tracks
  • 89-inch length and approximately 11-inch wheel paths
  • 1,500-pound pair rating when load is evenly distributed
  • Aluminum construction and 34-pound set weight
Cons
  • The 1,500-pound rating depends on even load distribution across both ramps.

Skip it if you want a single wide platform instead of separate tracks; VEVOR’s UT-6803-4 tri-fold ramp provides a 53.9-inch-wide surface.

This set fits pickup and trailer owners loading four-wheel equipment who want to adjust ramp spacing to the vehicle. Keep the pair’s even-distribution condition in mind, and center each tire in its ramp’s wheel path.

Full product details
BrandVENDAV
ColorSilver
Dimensions89"L x 12"W x 1.9"H
Item Weight34 pounds
Load Capacity1500 Pounds
ManufacturerVENDAV
Part NumberVEVR002
MaterialAluminum
Model NumberFor 4-Wheel Vehicles (2 Pc)

Listed on Amazon as: ATV Ramps for Pickup Trucks, 7.5 ft Folding Aluminum Loading Ramps, 2 Pack

View on Amazon
MAXIVAMN Aluminum Ramps

#6

6. MAXIVAMN Aluminum Ramps

  • Dimensions: 89"L x 12"W x 2"H
  • Weight: 14.4 kg
  • Load Capacity: 1500 lb
  • Material: Aluminum

Best for: Everyday two-track loaders.

Why it ranks #6: Its two 89-by-12-inch aluminum ramps are rated for 1,500 pounds per pair and are designed for compatible ATVs, UTVs, and mowers.

A folding pair of 89-inch aluminum ramps gives the MAXIVAMN set separate paths for pickup loading of ATVs, UTVs, riding mowers, and garden tractors. Each ramp is rated for up to 750 pounds, with the pair’s 1,500-pound rating applying when the load is evenly distributed across properly positioned ramps.

Each 89-by-12-inch ramp can be spaced to match the equipment’s wheel track, helping keep tires centered instead of guiding a vehicle onto one broad platform. The folding construction supports storage when the ramps are not in use, and aluminum is the listed material. Capacity is limited to 750 pounds per ramp and 1,500 pounds per pair with even distribution, so buyers need to account for both total equipment weight and how it sits across the ramps.

Pros
  • Two ramps can be spaced to match equipment wheel tracks
  • 89-by-12-inch ramp dimensions
  • Folding design supports storage
  • 750-pound rating per ramp and 1,500-pound pair rating with even distribution
Cons
  • Each ramp is limited to 750 pounds, even when the pair rating is 1,500 pounds.

Skip it if you need a wider single loading surface; GarveeTech’s C0BQwq5bJxJ7hjh1qVhFTArl7O1l ramp measures 49.61 inches wide.

This set works for pickup owners loading compatible four-wheel equipment who want adjustable dual tracks and folding storage. Keep each ramp’s 750-pound limit and the even-distribution condition in view when planning a load.

Full product details
BrandMAXIVAMN
ColorAluminum Bi-fold Ramp
Dimensions89"L x 12"W x 2"H
Item Weight14.4 kg
Load Capacity1500 pounds
ManufacturerMAXIVAMN
Part NumberMAXIVMAN-001-2PC
MaterialAluminum
Model NumberAluminum Bi-Fold Ramp

Listed on Amazon as: Loading Ramps for Pickup Trucks, 7.5 ft Aluminum ATV Ramps, 2 Pack

View on Amazon
Arejonner Steel Ramps

#7 · Steel Construction

7. Arejonner Steel Ramps

  • Dimensions: 72.5"L x 8.7"W x 1.8"H
  • Weight: 34.1 lb
  • Load Capacity: 1500 lb
  • Material: Alloy Steel

Best for: All-weather equipment loaders.

Why it ranks #7: The 72.5-inch alloy-steel pair is rated for 1,500 pounds and includes four safety straps, gloves, and a perforated traction surface.

A dense perforated steel surface gives the Arejonner pair traction-focused paths for loading motorcycles, ATVs, lawn mowers, and other equipment into a truck or trailer. Four safety straps help secure the ramps, while included gloves make installation more comfortable when setting up for a loading job.

Each alloy-steel ramp measures 72.5 by 8.7 inches, providing a defined wheel path for equipment headed into a shed, garage, barn, or trailer. The perforations support traction in varied weather, while the included four straps help keep the ramps secured during loading. A 1,500-pound stated capacity suits a range of wheeled equipment, and the two-ramp package supports positioning paths for vehicles with separate wheels. At 34.1 pounds, the pair is substantial to carry between jobs.

Pros
  • Dense perforated surface is specified to increase traction in all weather
  • Four safety straps are included to secure the ramps
  • Protective gloves are included for installation
  • Two ramps suit ATVs, motorcycles, mowers, UTVs, and golf carts
Cons
  • The 34.1-pound pair is substantial to carry between storage and loading sites.

Skip it if you need a wide, single platform rather than two narrow paths; GarveeTech’s 76-inch tri-fold ramp offers a 49.61-inch-wide surface.

This pair suits pickup owners loading wheeled equipment into a garage, shed, or trailer who value straps and gloves in the package. Its 8.7-inch width per ramp calls for careful wheel alignment.

Full product details
BrandArejonner
ColorSilver
Dimensions72.5"L x 8.7"W x 1.8"H
Item Weight34.1 pounds
Load Capacity1500 Pounds
ManufacturerArejonner
Part Number03
MaterialAlloy Steel
Model Number03

Listed on Amazon as: 72.5" Heavy Duty Folding Loading Ramps, 1500lb Capacity, Ideal for Motorcycles, Lawn Mowers, ATVs, UTVs, and More – Pack of 2 with Safety Straps and Gloves

View on Amazon
Evcitn 75-Inch Ramps

#8

8. Evcitn 75-Inch Ramps

  • Dimensions: 78.7"L x 47.2"W x 7.5"H
  • Weight: 36.4 lb
  • Load Capacity: 1500 lb
  • Material: Iron, Metal, Plastic, Stainless Steel

Best for: Textured-surface mower loaders.

Why it ranks #8: This two-ramp set is listed at 1,500 pounds per pair and features textured, perforated surfaces; its material listing includes stainless steel and other metals.

Textured treads and a perforated surface give the Evcitn pair a grippy loading path for mowers, motorcycles, dirt bikes, ATVs, and other listed equipment. The 75-inch ramps are rated for 1,500 pounds per pair, with reinforced construction and professional welding specified for supporting that capacity.

The 75-inch length provides an extended path for loading onto a pickup, while the anti-slip texture and perforations are intended to improve footing for tires during the approach. Reinforced construction and professional welding support the stated 1,500-pound pair rating. The listing identifies stainless steel alongside iron, metal, and plastic in its material specifications. At 36.4 pounds for the pair, the ramps can be moved for setup, but carrying them still involves a meaningful lift.

Pros
  • 75-inch ramps for pickup loading
  • 1,500-pound capacity stated for the pair
  • Textured treads and perforated anti-slip surface
  • Reinforced construction and professional welding
Cons
  • The 36.4-pound pair is a substantial carry for repeated setup and storage.

Skip it if you require a stated capacity above 1,500 pounds per pair; WheelX’s 1900LBS ramps list a 1,900-pound capacity.

Mower and motorcycle owners seeking textured, perforated ramps for pickup loading may find this pair’s 75-inch length useful. Its stated capacity is for the pair, and its 36.4-pound weight affects handling.

Full product details
BrandEvcitn
ColorBlack
Dimensions78.7"L x 47.2"W x 7.5"H
Item Weight36.4 pounds
Load Capacity1500 Pounds
ManufacturerEvcitn
Part NumberRP001-1.8M-2PCS-SV-01
MaterialIron, Metal, Plastic, Stainless Steel
Model NumberGCT001

Listed on Amazon as: Truck Ramps 75" 1500 LBS 2 Pack, Extra Heavy Duty Loading Ramps for Lawn Mower, Portabe Non Slip Motorcycle Ramps for Pickup Trucks, ATV, Dirt Bikes, UTV

View on Amazon
Arejonner Sandblasted Ramps

#9

9. Arejonner Sandblasted Ramps

  • Dimensions: 71"L x 8.86"W x 3.5"H
  • Weight: 34.1 lb
  • Load Capacity: 1500 lb
  • Material: Alloy Steel

Best for: Strap-equipped steel ramp pair.

Why it ranks #9: The alloy-steel pair is rated for 1,500 pounds and has a sandblasted, perforated surface plus four straps, though listed length is 71 inches.

A sandblasted finish paired with dense perforations gives these Arejonner ramps a traction-focused surface for loading motorcycles, ATVs, lawn mowers, and UTVs. Four safety straps are included to secure the pair, and protective gloves are supplied for installation, making the package suited to buyers who value setup accessories.

Each alloy-steel ramp measures 71 by 8.86 inches, creating separate paths for equipment wheels when loading into a pickup, shed, garage, or trailer. The sandblasted finish and perforated surface are specified to improve friction and load support, including in all-weather use. Four straps help secure the ramps, while the gloves address handling during installation. The pair has a stated 1,500-pound capacity, and its 34.1-pound weight is worth considering when carrying it to the tailgate.

Pros
  • Sandblasted finish and perforations specified to improve traction
  • Four safety straps included
  • Protective installation gloves included
  • 1,500-pound capacity stated for the pair
Cons
  • The 71-inch length is shorter than the 89-inch VENDAV dual-ramp set.

Skip it if you need longer individual paths for wheel-track loading; VENDAV’s For 4-Wheel Vehicles (2 Pc) ramps measure 89 inches.

This pair suits pickup owners loading wheeled equipment who want included straps and gloves alongside a traction-focused steel surface. Its 71-inch length and 8.86-inch width per ramp should suit the available loading path.

Full product details
BrandArejonner
ColorBlack
Dimensions71"L x 8.86"W x 3.5"H
Item Weight34.1 pounds
Load Capacity1500 pounds
ManufacturerArejonner
MaterialAlloy Steel
Model NumberHM42

Listed on Amazon as: 72.5" Heavy Duty Folding Loading Ramps with Sandblasted Finish, 1500lb Capacity, Ideal for Motorcycles, Lawn Mowers, ATVs, UTVs, and More – Pack of 2 with Safety Straps and Gloves

View on Amazon
Generic 78-Inch Steel Ramp

#10

10. Generic 78-Inch Steel Ramp

  • Dimensions: 78"L x 9"W x 1.97"H
  • Load Capacity: 750 lb
  • Material: Alloy Steel

Best for: Single-track motorcycle loaders.

Why it ranks #10: Its 78-inch folding alloy-steel ramp is pickup-compatible, but the listed 750-pound capacity is for a single ramp and offers less set capacity.

A single 78-inch alloy-steel ramp gives this model a straightforward path for loading one motorcycle, dirt bike, or other compatible equipment into a pickup. Its folding design reduces the listed expanded length from 73.11 inches to 37.6 inches, making storage in a garage or trailer more compact.

The 9.05-inch listed expanded width provides one loading path, so this ramp is suited to a single track rather than a paired setup for four-wheel equipment. Folding it to 37.6 inches long helps it fit more easily into garage or trailer storage. A 750-pound capacity sets a clear load limit, and the included load straps support securing it during use. Alloy steel is the listed material, a relevant consideration for buyers who will carry the ramp between storage and tailgate.

Pros
  • Folding design reduces length to 37.6 inches for storage
  • 78-inch product dimension
  • 750-pound stated capacity
  • Load straps included
Cons
  • A single ramp with a 750-pound capacity does not provide dual-track loading.

Skip it if you load an ATV using two wheel tracks; MAXIVAMN’s Aluminum Bi-Fold Ramp pair provides two separate ramps.

This ramp fits motorcycle and dirt-bike owners who want one folding path and compact garage or trailer storage. Its 750-pound capacity and single-ramp format limit it to loads compatible with that rating and layout.

Full product details
BrandGeneric
ColorSilver Color
Dimensions78"L x 9"W x 1.97"H
Load Capacity750 Pounds
Manufacturerauto beauty shop
Part Numberas005-F
MaterialAlloy Steel
Model Numberas005-F

Listed on Amazon as: Alloy Steel Motorcycle Ramp, 750 Lbs Capacity, 78in Folding Loading Ramp with Load Straps for Pickup Trucks, Motorcycles, ATVs, UTVs, Lawn Mowers, Dirt Bikes (1)

View on Amazon

Avoid the capacity-rating trap

Check whether the stated capacity applies to one ramp or the complete set before loading. VENDAV explicitly lists 1,500 pounds per pair, with up to 750 pounds on each ramp when the load is evenly distributed; MAXIVAMN likewise describes 1,500 pounds per pair and 750 pounds per ramp. The Generic 78-Inch Steel Ramp, by contrast, lists a 750-pound capacity for one ramp.

The wide VEVOR platform specifies 500 pounds per ramp and 1,500 pounds for a set of three, while the VNN ramp lists a 1,600-pound capacity without clarifying in the supplied specifications whether its figure is a total-set rating. Do not assume similar numbers mean the same thing.

Compare equipment weight with the ramp’s applicable rating, account for how the load bears on each section, and confirm any unclear rating with the seller or manufacturer before use. A rating alone does not establish compatibility with a particular truck or loading method.

Match ramp layout to wheels and tailgate

Choose a layout that supports the equipment’s contact points and fits the truck, rather than relying on ramp length alone. Two separate ramps such as VENDAV’s 89-by-12-inch pair can be spaced to match an ATV or mower’s wheel track, but each tire must stay centered on its own ramp. A wide platform, such as VNN’s 77-by-54-inch ramp or VEVOR’s 76.2-by-53.9-inch model, avoids setting two wheel paths independently but is broader and heavier to handle: VEVOR lists 50.9 pounds.

Check the truck’s tailgate height against the available ramp length and the manufacturer’s recommended loading height where supplied; VEVOR gives a recommended height range of 3.9–31.5 inches. Also verify the ramp’s contact points sit securely on your tailgate.

VNN lists rubber-coated fingers intended to protect the tailgate, while not every product description specifies that feature. Dimensions and listed features do not guarantee fit with every truck.

How to Choose a Pickup Tailgate Ramp

Ramp format and width

Choose between a broad platform and separate wheel-track ramps based on how your equipment contacts the ramp. The VNN platform measures 77 by 54 inches, VEVOR measures 76.2 by 53.9 inches, and GarveeTech measures 76.38 by 49.61 inches; each is a wide folding format. Pair-style options such as VENDAV and MAXIVAMN list two ramps, each 89 by 12 inches, so spacing can be adjusted for wheel tracks.

A wide platform may suit a machine needing continuous support, while two narrower ramps can be easier to position around separate tires. Check usable width and wheel spacing against your equipment, and account for storage and handling: VEVOR lists a 50.9-pound weight.

Capacity and rating basis

Look for a capacity that exceeds the equipment’s weight and verify whether it applies per ramp or to the full set. Several pairs list 1,500 pounds per pair, including VENDAV and MAXIVAMN; VENDAV specifies 750 pounds per ramp when evenly loaded. WheelX lists 1,900 pounds, while VNN lists 1,600 pounds and the Generic steel ramp lists 750 pounds.

VEVOR states 500 pounds per ramp and 1,500 pounds for its three-ramp set. These figures make rating basis essential, not just the largest number.

Buyers loading heavier equipment should focus on clearly stated set capacity and load distribution; lighter single-wheel loads may fit a lower-rated ramp, provided the load remains within its specific rating.

Length, material, and handling

Check ramp length against tailgate height, then weigh material and handling needs alongside the published dimensions. Listed lengths span about 71 inches for Arejonner Sandblasted Ramps to 91 inches in WheelX’s product description; several aluminum pairs are 89 inches, while VNN and VEVOR are about 76–77 inches. Longer ramps can provide a less abrupt approach for a given truck height, but actual fit depends on the tailgate and ramp contact points.

Materials include aluminum, aluminum alloy, and alloy steel; Arejonner lists alloy steel, while VNN and several paired options list aluminum. For frequent carrying, compare listed weights where provided: VENDAV is 34 pounds, GarveeTech 38.7 pounds, and VEVOR 50.9 pounds.

Buyers prioritizing lighter handling may favor aluminum options; confirm product-specific weight and folded dimensions before deciding.

Which Pickup Tailgate Ramp Should You Choose?

For a broad, pickup-oriented loading surface, choose VNN 77-Inch Tri-Fold Ramp: it combines a 77-by-54-inch platform, 1,600-pound listed capacity, and rubber-coated tailgate fingers. If you want another wide platform and its three-section rating suits your load, VEVOR 76-Inch Tri-Fold Ramp specifies 1,500 pounds across the set. Choose GarveeTech 76-Inch Tri-Fold Ramp for a single folding aluminum surface with treads and a 1,500-pound rating.

For separate wheel tracks, VENDAV Folding Aluminum Ramps and MAXIVAMN Aluminum Ramps each list a 1,500-pound pair capacity and 89-by-12-inch ramps. WheelX Aluminum Loading Ramps lists the highest capacity here at 1,900 pounds.

For a single-ramp use case, Generic 78-Inch Steel Ramp is rated at 750 pounds; verify that rating against the actual load.

Frequently Asked Questions

How do I measure my pickup’s tailgate height and choose a safe ramp length?

Measure from the ground to the top of the tailgate where the ramp will rest, then check the ramp’s length and fit guidance. A longer ramp generally creates a gentler incline, but confirm that it reaches the ground securely and that its listed capacity covers the equipment and operator, if applicable.

How can I secure a loading ramp to a pickup tailgate without damaging it?

Use the ramp’s provided straps or attachment system as directed, and make sure its fingers sit firmly on the tailgate before loading. Protect contact points with suitable padding if needed, without compromising the connection. Check that the ramp cannot shift, and follow the ramp and pickup manufacturers’ instructions.

Should I choose a wide platform ramp or a pair of wheel-track ramps for my equipment?

Choose a platform when your equipment needs a continuous loading surface; it can also simplify positioning. A pair of wheel-track ramps can suit equipment with aligned wheels or tracks and may be easier to handle separately. Compare the listed capacity for the complete set or pair and confirm the dimensions suit your equipment.

How should I compare ramp capacity ratings for a pair or multi-section ramp?

Check whether the stated rating applies to one ramp, the pair, or the complete set, and compare it with the total load you intend to move. For pairs, do not assume each ramp can carry the full listed pair capacity. The product listing’s rating and usage instructions should guide your decision.

What should I check before loading equipment onto a folding ramp?

Inspect the ramp for damage, confirm that all sections are fully unfolded and locked as directed, and verify the tailgate connection and straps. Make sure the ramp rests on stable ground and that its surface is clear. Keep the equipment centered, move slowly, and stop if the ramp shifts.

Final Words

For a pickup-oriented continuous loading surface, the VNN 77-Inch Tri-Fold Ramp is the leading choice here, with its 77-by-54-inch platform, listed 1,600-pound capacity, and rubber-coated fingers. If you prefer wheel tracks, compare pair dimensions and ratings against your load; WheelX lists 1,900 pounds, while several pairs list 1,For a single-ramp use case, verify the Generic steel ramp’s 750-pound rating against the actual load before choosing.

Leave a Reply

Your email address will not be published. Required fields are marked *