A strong truck spray liner provides a textured protective coating in a format and quantity suited to your bed, whether you need a small touch-up or a full DIY application. The U-POL Raptor four-quart kit leads this comparison with a spray gun, a stated 3:1 mixing ratio and coverage of up to 125 square feet. Other options range from single-can aerosols to gallon kits and brush-or-roll liquid coating, so the best fit depends on your project size and preferred application method.
Compare the listed coverage, kit contents and formats before choosing: a single aerosol covers far less area than a gallon kit, while a ready-to-use spray can avoids mixing and separate spray equipment. The picks below distinguish full-bed kits from targeted repair and recoating choices.
The U-POL Raptor 4-Quart Kit is the best overall pick because its four-quart kit includes a spray gun and covers up to 125 square feet, typically enough for a standard six-foot truck bed. Its simple 3:1 mix ratio gives DIY buyers a clear preparation method. For smaller repairs, aerosols such as the RAPTOR 2K Aerosol offer spray application without additional equipment; for a ready-to-use coating, Rust-Oleum Truck Bed Spray Coating lists coverage up to 20 square feet per can.
Our Top Picks
Best OverallThe four-quart kit includes a spray gun, uses a stated 3:1 mix ratio, and covers up to 125 square feet, typically a standard six-foot bed.
View on Amazon
Eight-Foot Bed CoverageThe professional two-component kit includes a spray gun and foam rollers, and its listing says one coat can cover an eight-foot truck bed.
View on Amazon
Broad Coverage RangeThis gallon kit includes an applicator gun with regulator and estimates 110 to 130 square feet of coverage at 10 mils wet film thickness.
View on Amazon- Best 2K Aerosol U-POL Raptor 2K Aerosol
Compare spray liners by format and coverage
| # | Product | Volume | Weight | Size | Form | Buy |
|---|---|---|---|---|---|---|
| 1 | 1. U-POL Raptor 4-Quart KitBest Overall | 4 quarts | — | 4 Quarts | Liquid | View on Amazon |
| 2 | 2. Herculiner Professional KitEight-Foot Bed Coverage | — | 11.42 lb | — | — | View on Amazon |
| 3 | 3. Custom Coat 1-Gallon KitBroad Coverage Range | 1 gallons | 5.28 kg | 1 Gallon Kit with Gun | Liquid | View on Amazon |
| 4 | 4. U-POL Raptor 2K AerosolBest 2K Aerosol | 26.4 fluid oz | 16 oz | 13.2 oz (Pack of 2) | Aerosol | View on Amazon |
| 5 | 5. LAUCO Rintek KitAll-in-one spray-gun kit | — | 11.75 lb | — | — | View on Amazon |
| 6 | 6. Custom Shop Raptor KitAdjustable-gun coating workflow | — | 12.3 lb | — | — | View on Amazon |
| 7 | 7. U-POL Raptor 1K AerosolAerosol repair and touch-ups | 14.3 fluid oz | 0.45 kg | 14.3 Fl Oz (Pack of 1) | Aerosol | View on Amazon |
| 8 | 8. Rust-Oleum Truck Bed SprayMetal-bed aerosol recoating | 15 fluid oz | 1.6 oz | 15 oz (Pack of 1) | Aerosol | View on Amazon |
| 9 | 9. Herculiner Aerosol LinerSmall-area liner touch-ups | 15 fluid oz | 16 oz | 1 Count (Pack of 1) | item form | View on Amazon |
| 10 | 10. Rust-Oleum Truck Bed CoatingFlexible brush-or-spray recoating | 32 fluid oz | 1.9 lb | 32 Fl Oz (Pack of 1) | Liquid | View on Amazon |
Detailed Reviews: Best Spray Liner For Trucks

#1 · Best Overall
1. U-POL Raptor 4-Quart Kit
- Volume: 4 quarts
- Size: 4 Quarts
- Form: Liquid
Best for: Six-foot-bed DIY kit.
Why it ranks #1: The four-quart kit includes a spray gun, uses a stated 3:1 mix ratio, and covers up to 125 square feet, typically a standard six-foot bed.
A four-quart kit rated for about 125 square feet can cover a standard six-foot truck bed, giving this U-POL Raptor system a clear whole-bed use case. It includes a spray gun and uses a stated 3:1 mix ratio, joining coating volume with application equipment.
The kit pairs four 24-ounce bottles of black urethane base with a 32-ounce hardener and spray gun, so buyers receive the listed components for a spray-on application. Its simple 3:1 mixing instruction—add eight ounces of hardener to each bottle, then shake and spray—sets out the workflow. U-POL says the flexible 2K coating resists scratches, chemicals, stains, rust, and corrosion, while also helping reduce road noise and vibration.
- Four-quart kit covers about 125 square feet
- Includes spray gun and hardener
- Stated 3:1 mix-and-spray workflow
- Flexible coating resists scratches, chemicals, stains, rust, and corrosion
- The base and hardener must be mixed before spraying.
Skip it if you want an aerosol for a small repair without mixing; U-POL RAPTOR 2K UP4883-2PK is an aerosol option.
Pick this kit for a DIY coating project on a standard six-foot bed or other surfaces within its stated coverage. Its multi-component mixing workflow suits buyers prepared to measure, shake, and spray rather than apply a ready-to-use aerosol.
Full product details
| Brand | U-POL |
|---|---|
| Color | Black |
| Included Components | 4 Raptor Bed Liners 1 Raptor Bedliner Hardener 1 Spray Gun |
| Item Form | Liquid |
| Item Volume | 4 quarts |
| Manufacturer | U-POL |
| Model | 0820VG |
| Model Number | 0820VG |
| Size | 4 Quarts |
| Special Feature | UV Resistant |
| Special Features | UV Resistant |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: U-POL Raptor Black Urethane Spray-On Truck Bed Liner Kit, 4 Quarts
View on Amazon
#2 · Eight-Foot Bed Coverage
2. Herculiner Professional Kit
- Weight: 11.42 lb
Best for: Eight-foot-bed textured coating.
Why it ranks #2: The professional two-component kit includes a spray gun and foam rollers, and its listing says one coat can cover an eight-foot truck bed.
One coat is stated to cover an eight-foot truck bed, making this Herculiner kit a direct option for buyers coating a long bed. The two-component system includes a spray gun and foam rollers, so the product can be sprayed or rolled rather than limiting application to one method.
The professional-grade kit combines a two-component textured coating with an included spray gun and foam rollers. That choice of application methods lets buyers select spraying or rolling for the bed-liner job. Herculiner states that one coat can cover an eight-foot bed and that the cured surface has a skid-resistant texture. The coating is also described as resistant to impact, scratches, chemicals, water, and fading, relevant to demanding vehicle use.
- One coat stated to cover an eight-foot truck bed
- Includes spray gun and foam rollers
- Can be sprayed or rolled
- Cured texture is skid-resistant
- The supplied coverage statement specifies one coat, not coverage for multiple coats.
Skip it if you need a stated 125-square-foot kit coverage figure; U-POL Raptor 0820VG provides that planning reference.
This Herculiner kit fits buyers coating an eight-foot bed who want a choice between spraying and rolling. Its one-coat coverage statement is the key boundary; consider the stated application scope when planning additional coats or other surfaces.
Full product details
| Brand | HERCULINER |
|---|---|
| Item Weight | 11.42 pounds |
| Item model number | HCL2K8 |
| Manufacturer | J-B Weld |
| Part Number | HCL2K8 |
| Model | Herculiner Spray-On Truck Bed Liner Kit, Black, 1 Gallon – Professional Grade |
| Dimensions | 11 x 9.13 x 8.31 inches |
| Special Features | Textured Finish |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Listed on Amazon as: Herculiner Spray On Bed Liner Kit – Professional Grade, 1 Gallon Spray-On, Black
View on Amazon
#3 · Broad Coverage Range
3. Custom Coat 1-Gallon Kit
- Volume: 1 gallons
- Weight: 5.28 kg
- Size: 1 Gallon Kit with Gun
- Form: Liquid
Best for: Regulated-gun gallon application.
Why it ranks #3: This gallon kit includes an applicator gun with regulator and estimates 110 to 130 square feet of coverage at 10 mils wet film thickness.
An applicator spray gun with regulator comes in this one-gallon Custom Coat kit, giving buyers equipment for a controlled spray-on bed-liner job. The stated coverage is 110–130 square feet at 10 mils wet film thickness, useful for estimating material across a substantial application.
The kit includes four 24-ounce cans of black liner base, four eight-ounce cans of standard hardener, and a spray gun with regulator. That combination supports a multi-step application rather than a single-can touch-up, while the specified 110–130-square-foot estimate at 10 mils wet provides a coverage reference. Custom Coat describes a textured protective coating that tolerates extreme climatic temperatures, a relevant property for vehicles exposed to changing conditions.
- One-gallon kit includes base, hardener, and spray gun with regulator
- Estimated coverage of 110–130 square feet at 10 mils wet
- Textured protective coating
- Listed tolerance for extreme climatic temperatures
- Coverage estimate is tied to a 10-mil wet film thickness.
Skip it if you want an aerosol without a multi-part mixing process; U-POL RAPTOR 2K UP4883-2PK applies from activated cans.
This Custom Coat kit suits buyers planning a broad spray-on application who can work with separate base and hardener components. Use its coverage figure as an estimate tied to the listed 10-mil wet-film thickness, not as an unconditional area guarantee.
Full product details
| Brand | Custom Shop |
|---|---|
| Color | Black |
| Color Code | #000000 |
| Included Components | Applicator Spray Gun with Regulator |
| Item Form | Liquid |
| Item Volume | 1 gallons |
| Item Weight | 5.28 kg |
| Manufacturer | Custom Shop |
| Model Number | 5864267669 |
| Size | 1 Gallon Kit with Gun |
| Special Feature | Rust Resistant |
| Special Features | Rust Resistant |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: Custom Coat Black Urethane Spray-On Truck Bed Liner Kit with Gun, 1 Gallon
View on Amazon
#4 · Best 2K Aerosol
4. U-POL Raptor 2K Aerosol
- Volume: 26.4 fluid oz
- Weight: 16 oz
- Size: 13.2 oz (Pack of 2)
- Form: Aerosol
Best for: Equipment-free aerosol protection.
Why it ranks #4: The two-can 2K aerosol set needs no spray equipment and lists a textured finish resistant to impact, scratches, and UV damage.
A base-activated 2K aerosol applies without spray equipment, making this U-POL Raptor two-pack useful for buyers seeking a textured coating in can form. Its stated protection includes resistance to impact, scratches, and UV damage, with truck beds and other vehicle surfaces among the listed uses.
The package contains two 13.2-ounce aerosol cans, and U-POL says to activate each using the valve on the base. That equipment-free application avoids the spray-gun workflow of a kit, while the product is described as producing a textured gun finish. Its listed uses include truck beds and vehicle surfaces, with resistance claims covering impact, scratches, UV damage, corrosion, salt water, and harsh chemicals.
- Two 13.2-ounce aerosol cans
- No spray equipment required
- Base valve activation
- Textured finish with listed impact, scratch, UV, corrosion, salt-water, and chemical resistance
- Each aerosol requires activation at its base valve before application.
Skip it if you need a spray gun and stated 125-square-foot coverage; U-POL Raptor 0820VG is the kit option for that scope.
This two-pack fits buyers applying protective coating to a bed or vehicle surface without separate spray equipment. Its base-activated aerosol format is the key workflow consideration; the supplied details do not state square-foot coverage for planning a full bed.
Full product details
| Brand | U-POL |
|---|---|
| Color | Black |
| Container Type | Can |
| Included Components | 2 Spray Cans |
| Item Form | Aerosol |
| Item Volume | 26.4 fluid ounces |
| Item Weight | 16 ounces |
| Manufacturer | U-POL |
| Model | UP4883-2PK |
| Model Number | UP4883-2PK |
| Size | 13.2 Ounce (Pack of 2) |
| Special Feature | UV Resistant |
| Special Features | UV Resistant |
| Warranty Description | See packaging for details |
Listed on Amazon as: U-POL Raptor 2K Black Spray-On Truck Bedliner Aerosol 13.2OZ 2-PK
View on AmazonWhy it ranks #5: The one-gallon urethane kit includes hardener and a spray gun, with a shake-and-shoot application intended for a complete spray-on bed-liner job.
The LAUCO Rintek kit combines one gallon of urethane liner, hardener, and a precision spray gun, giving buyers the listed components for a complete spray-on bed-liner job. Its shake-and-shoot system is presented as a simpler mixing workflow for coating beds, bumpers, trailers, and toolboxes.
Rintek pairs liner and hardener with a precision spray gun, and describes the application as an easy mix, shake, and shoot process. That combination can streamline a job for buyers seeking a kit rather than sourcing the listed application components separately. LAUCO names truck beds, bumpers, off-road vehicles, trailers, and toolboxes as uses, and describes the textured coating as resisting daily use, abrasion, and impacts, with waterproof and UV-resistant features listed.
- One-gallon kit includes liner, hardener, and spray gun
- Shake-and-shoot application workflow
- Listed for beds, bumpers, off-road vehicles, trailers, and toolboxes
- Waterproof and UV-resistant features
- The supplied details do not state a coverage-area figure.
Skip it if you need a stated square-foot coverage estimate; U-POL Raptor 0820VG lists about 125 square feet per four-quart kit.
Choose Rintek for a spray-gun kit intended for beds and several other vehicle or equipment surfaces. Its included components and shake-and-shoot workflow are useful fit points, but the supplied information does not give a coverage estimate for planning area.
Full product details
| Brand | LAUCO |
|---|---|
| Item Weight | 11.75 pounds |
| Item model number | RINTEK-BEDLINER-PARENT |
| Part Number | RHINOX-95110-95122 |
| Dimensions | 10 x 7 x 10 inches |
| Special Features | UV Resistant, Waterproof |
Listed on Amazon as: LAUCO Rintek Urethane Spray On Truck Bed Liner Kit, Durable Textured Coating Mix, Shake & Shoot 1 Gallon, Black, with Spray Gun 95110
View on AmazonWhy it ranks #6: This one-gallon spray-on kit includes an adjustable-nozzle gun with regulator and gauge; its stated benefits include abrasion and stain resistance.
An adjustable-nozzle spray gun with regulator and gauge comes with this Custom Shop one-gallon Raptor kit, giving applicators control points during spraying. Its add-hardener, shake, and spray workflow pairs that equipment with a coating described as abrasion- and stain-resistant.
Custom Shop specifies an adjustable nozzle, regulator, and gauge on the included bedliner spray gun, which gives buyers equipment to manage application rather than relying on an aerosol. The listed workflow is to add hardener, shake, and spray. The coating is described as waterproof and flexible, with resistance to abrasion, stains, rust, corrosion, salt, damp, and extreme temperatures; it is also said to help deaden sound and vibration.
- One-gallon kit format
- Spray gun has adjustable nozzle, regulator, and gauge
- Waterproof, flexible coating
- Listed resistance to abrasion, stains, rust, corrosion, salt, and damp
- The listed application workflow requires adding hardener before spraying.
Skip it if you want a ready-to-spray aerosol instead of adding hardener; U-POL RAPTOR 2K UP4883-2PK uses activated spray cans.
This kit suits buyers seeking a spray-gun application and the listed resistance properties for a truck bed. Its hardener-and-shake workflow is a relevant fit consideration, as is the need to use the included gun rather than an aerosol format.
Full product details
| Brand | Custom Shop |
|---|---|
| Item Weight | 12.3 pounds |
| Item model number | 5841743308 |
| Manufacturer | Custom Shop |
| Part Number | CUS KIT-0822-4-GUN |
| Package Dimensions | 12.1 x 10.3 x 7.7 inches |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: Custom Shop U-Pol Raptor Black Urethane Spray-On Truck Bed Liner Kit, 1 gal
View on Amazon
#7
7. U-POL Raptor 1K Aerosol
- Volume: 14.3 fluid oz
- Weight: 0.45 kg
- Size: 14.3 Fl Oz (Pack of 1)
- Form: Aerosol
Best for: Aerosol repair and touch-ups.
Why it ranks #7: The single 14.3-ounce aerosol applies a textured 1K coating without a separate kit, and is described for truck beds and other vehicle surfaces.
U-POL’s RAPTOR 1K arrives as a professional-grade aerosol, offering a single-can route for protecting truck beds and other vehicle surfaces. Its textured finish is listed to add grip, while the coating is described as resisting impact, scratches, corrosion, and water damage.
The 14.3-ounce aerosol format makes this product relevant to targeted applications on truck beds and other vehicle surfaces, rather than requiring the listed multi-component kit format. U-POL describes the 1K coating as a durable barrier against impact, scratches, corrosion, and water damage. Its textured finish is also presented as providing additional grip, so the surface treatment combines protection claims with a practical traction-related benefit.
- Aerosol application format
- 1K formula
- Textured finish provides additional grip
- Listed protection against impact, scratches, corrosion, and water damage
- The supplied information gives no coverage-area figure for planning a full-bed application.
Skip it if you need a stated full-bed coverage figure and included spray gun; U-POL Raptor 0820VG lists both for its kit.
Choose this RAPTOR aerosol for targeted protection on a truck bed or other vehicle surface where a textured finish and 1K format fit the job. The supplied details do not state coverage, so plan cautiously for larger applications.
Full product details
| Brand | U-POL |
|---|---|
| Color | Black |
| Color Code | Black |
| Included Components | Aerosol |
| Item Form | Aerosol |
| Item Volume | 14.3 fluid ounces |
| Item Weight | 0.45 kg |
| Manufacturer | U-POL Ltd |
| Model | RAPTOR |
| Model Number | UP4879 |
| Size | 14.3 Fl Oz (Pack of 1) |
Listed on Amazon as: RAPTOR 1K Truck Bed Aerosol Spray, Professional Grade, Black
View on Amazon
#8
8. Rust-Oleum Truck Bed Spray
- Volume: 15 fluid oz
- Weight: 1.6 oz
- Size: 15 oz (Pack of 1)
- Form: Aerosol
Best for: Metal-bed aerosol recoating.
Why it ranks #8: This 15-ounce aerosol covers up to 20 square feet, dries to touch in one hour, and has a textured non-skid finish for metal surfaces.
Coverage of up to 20 square feet per can gives Rust-Oleum’s truck bed coating room to address a larger metal surface than a small touch-up. Its any-angle spray tip also helps reach awkward areas, while the textured, non-skid finish suits truck beds, trailer floors, and fenders.
The aerosol is specified for bare or primed metal truck beds, as well as trailer floors and fenders, making it useful for several metal-surface jobs. Its any-angle comfort tip reduces finger fatigue and helps reach hard-to-paint places, which can simplify application around bed contours. Rust-Oleum lists up to 20 square feet of coverage and one-hour touch-dry time, giving buyers concrete planning information for coating area and handling workflow.
- Any-angle spray tip reaches hard-to-paint places
- Covers up to 20 square feet per can
- Touch-dry in one hour
- Textured, non-skid finish resists scratches and outdoor elements
- The stated one-hour dry time is to the touch, not a stated full-cure time.
Skip it if you want brush-or-roller application and up to 40 square feet per container; Rust-Oleum 342668 offers those options.
This aerosol fits buyers recoating metal beds, trailer floors, or fenders who value directional spraying and a textured finish. Keep its stated coverage and touch-dry time in view when planning a larger surface or the next work step.
Full product details
| Brand | Rust-Oleum |
|---|---|
| Color | Black |
| Color Code | Black |
| Container Type | Bottle |
| Included Components | Spray Paint |
| Item Form | Aerosol |
| Item Volume | 15 fluid ounces |
| Item Weight | 1.6 ounces |
| Manufacturer | Rust-Oleum |
| Model | Truck Bed Coating Spray |
| Model Number | 248914 |
| Size | 15 Ounce (Pack of 1) |
| Special Feature | Scratch Resistant |
| Special Features | Scratch Resistant |
| Warranty Description | Satisfaction Guaranteed |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 Warning for California Consumers WARNING: Cancer – www.P65Warnings.ca.gov |
Listed on Amazon as: Rust-Oleum Automotive Truck Bed Coating Spray Paint, Black
View on Amazon
#9
9. Herculiner Aerosol Liner
- Volume: 15 fluid oz
- Weight: 16 oz
- Size: 1 Count (Pack of 1)
- Form: item form
Best for: Small-area liner touch-ups.
Why it ranks #9: The 15-ounce aerosol covers about six to seven square feet and is specifically positioned for touch-ups, cut-ins, trim, bumpers, and wheel wells.
Its 15-ounce aerosol format covers about 6–7 square feet, making this Herculiner a practical choice for small bed-liner touch-ups and cut-ins. The textured black coating also suits trim, bumpers, underbodies, and wheel wells, so one can can address more than a truck bed’s worn spots.
Herculiner identifies this aerosol as an “Original” truck bed liner for touch-ups and cut-ins, helping target a damaged or unfinished section without committing to a full-bed kit. Its stated 6–7-square-foot coverage gives a useful scale for planning small applications. The coating is also listed for exterior trim, bumpers, undercoating, and wheel wells, extending its use around the vehicle. The supplied preparation guidance calls for cleaning, scuffing, and masking the application area before coating.
- Aerosol format suits targeted applications
- About 6–7 square feet of stated coverage
- Textured black finish
- Listed for trim, bumpers, undercoating, and wheel wells
- Coverage is limited to about 6–7 square feet per can.
Skip it if you need to coat a complete truck bed; U-POL Raptor 0820VG lists coverage for a standard six-foot bed.
Choose this Herculiner for small repairs, cut-ins, or compatible trim and wheel-well applications. Its aerosol format keeps the product focused on limited areas; the listed coverage makes it a poor match for coating an entire bed.
Full product details
| Brand | HERCULINER |
|---|---|
| Color | Black |
| Color Code | Black |
| Included Components | Herculiner Aerosol Spray Truck Bed Liner, 15 Ounce Spray Can |
| Item Form | item_form |
| Item Volume | 15 fluid ounces |
| Item Weight | 16 ounces |
| Manufacturer | PEAK/HERCLNR |
| Model | HALB15 |
| Model Number | HALB15 |
| Size | 1 Count (Pack of 1) |
| Special Feature | special_feature |
| Special Features | special_feature |
| Warranty Description | Warranty |
Listed on Amazon as: Herculiner Aerosol Spray Truck Bed Liner, 15 Ounce Spray Can, Black, Textured, Suitable For All Truck Beds, 6-7 sq ft Coverage
View on Amazon
#10
10. Rust-Oleum Truck Bed Coating
- Volume: 32 fluid oz
- Weight: 1.9 lb
- Size: 32 Fl Oz (Pack of 1)
- Form: Liquid
Best for: Flexible brush-or-spray recoating.
Why it ranks #10: This quart coating covers up to 40 square feet but applies by spray, brush, or roller rather than being a spray-can product.
Three application methods—spray, brush, or roller—make this quart of Rust-Oleum truck bed coating adaptable to different metal-bed workflows. It covers up to 40 square feet and dries to the touch in one to two hours, useful details for planning a recoat or restoration.
Rust-Oleum describes this water-based coating as forming to truck-bed contours and protecting metal against scratches, rust, weather, and abrasion. Because it can be applied by spray, brush, or roller, buyers can choose a method suited to the surface and available tools. The quart is listed to cover up to 40 square feet, with touch-dry time of one to two hours, helping set expectations for area and handling.
- Apply by spray, brush, or roller
- Covers up to 40 square feet per quart
- Water-based formula
- Touch-dry in one to two hours
- The stated dry time is one to two hours to the touch, not a stated full-cure time.
Skip it if you want an aerosol comfort tip for hard-to-reach places; Rust-Oleum Truck Bed Coating Spray offers any-angle spraying.
This quart suits buyers restoring or recoating a metal truck bed who want a choice of spray, brush, or roller application. Its stated coverage and touch-dry time help plan the job, but do not specify a full-cure schedule.
Full product details
| Brand | Rust-Oleum |
|---|---|
| Color | Black |
| Color Code | Black |
| Container Type | container |
| Included Components | Paint |
| Item Form | Liquid |
| Item Volume | 32 fluid ounces |
| Item Weight | 1.9 pounds |
| Manufacturer | Rust-Oleum |
| Model | Truck Bed Coating |
| Model Number | 342668 |
| Size | 32 Fl Oz (Pack of 1) |
| Special Feature | special_feature |
| Special Features | special_feature |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 Warning for California Consumers WARNING: Cancer – www.P65Warnings.ca.gov |
Listed on Amazon as: Rust-Oleum 342668 Stops Rust Truck Bed Coating, 1 Quart, Black
View on AmazonAvoiding coverage and finish mismatches
The most common planning trap is treating a stated coverage figure as a guarantee for every truck bed and finish. The U-POL Raptor 4-Quart Kit lists up to 125 square feet, typically enough for a standard six-foot bed, but its description warns that larger surfaces or thicker texture may need additional kits. Custom Coat 1-Gallon Kit estimates 110 to 130 square feet at a specified 10 mils wet film thickness, so that figure is tied to an application thickness.
Aerosol coverage is much smaller: Rust-Oleum Truck Bed Spray lists up to 20 square feet per can, while Herculiner Aerosol Liner lists about six to seven. Measure the intended coated area and account for the listed application assumptions before buying; do not equate a can count or gallon volume with guaranteed full-bed coverage.
Application format changes the project
Spray format determines what preparation and equipment the job calls for, not just how the coating comes out of the container. Aerosols are convenient for localized areas: U-POL Raptor 2K Aerosol says no spray equipment is required, while Herculiner Aerosol Liner is identified for touch-ups and cut-ins. Full kits suit broader coverage but involve more steps: U-POL Raptor 4-Quart Kit calls for a 3:1 mix, while Herculiner Professional Kit is a two-component system that can be sprayed or rolled using included foam rollers.
Rust-Oleum Truck Bed Coating is a liquid and can be applied by spray, brush, or roller, which is flexible but is not a ready-to-spray aerosol. Match the format to your available tools, project scale, and willingness to mix components.
How to Choose a Truck Bed Spray Liner
Coverage and project size
Look for a stated coverage figure that matches the area you intend to coat, and note any conditions attached to it. Coverage ranges from about six to seven square feet for Herculiner Aerosol Liner to up to 20 square feet for Rust-Oleum Truck Bed Spray. At kit scale, Custom Coat 1-Gallon Kit estimates 110 to 130 square feet at 10 mils wet film thickness, and U-POL Raptor 4-Quart Kit lists up to 125 square feet, typically enough for a standard six-foot bed.
Smaller areas favour aerosols; a full bed favours a gallon kit. Treat the figures as estimates, since thicker texture or larger surfaces may require more material.
Application format and included tools
Choose between a ready-to-use aerosol and a kit that requires mixing or other application steps. U-POL Raptor 2K Aerosol says it needs no spray equipment, while Rust-Oleum Truck Bed Spray provides an any-angle spray tip. For larger work, U-POL Raptor 4-Quart Kit includes a spray gun and specifies a 3:1 mix ratio; Custom Coat 1-Gallon Kit also includes a spray gun with regulator.
Herculiner Professional Kit includes a gun and foam rollers, allowing spray or roll application. Aerosols favour localized jobs and simpler setup, while kits favour broad coverage when you can follow preparation and mixing directions.
Protection and finish characteristics
Compare the listed finish and resistance claims with the surfaces and conditions your liner will face. Rust-Oleum Truck Bed Spray specifies a textured, non-skid finish and scratch resistance; Rust-Oleum Truck Bed Coating lists rust and abrasion resistance. U-POL Raptor 2K Aerosol describes resistance to impact, scratches, UV damage, corrosion, salt water, and harsh chemicals.
The U-POL Raptor 4-Quart Kit lists resistance to scratches, chemicals, stains, rust, and corrosion, as well as UV and weather resistance. For a small touch-up, an aerosol’s listed protective features may be sufficient; for a larger area or broader exposure concerns, compare the resistance claims of the full kits without assuming they guarantee identical performance.
Which Truck Bed Spray Liner Should You Choose?
For a full standard six-foot bed and a clear coverage estimate, choose U-POL Raptor 4-Quart Kit: it includes a gun and lists up to 125 square feet. If you have an eight-foot bed, Herculiner Professional Kit is notable for its stated one-coat coverage claim for that bed size and includes a gun and rollers. For a gallon kit with a stated coverage range, Custom Coat 1-Gallon Kit estimates 110 to 130 square feet at 10 mils.
For a localized repair without spray equipment, choose U-POL Raptor 2K Aerosol; for a small touch-up, Herculiner Aerosol Liner lists six to seven square feet. If you want liquid coating that can be applied by spray, brush, or roller, Rust-Oleum Truck Bed Coating offers that flexibility, but it is not an aerosol.
Related Buying Guides
- Best Spray On Liner
- Best Spray In Bed Liners For Trucks
- Best Bed Liner Spray
- Best Spray In Bed Liner
- Best Spray On Bed Liners
- Best Bed Liner Spray Paint
Frequently Asked Questions
How should I prepare a truck bed before applying spray liner?
Start with a clean, dry surface and remove loose paint, rust, dirt, and existing coating that is not firmly bonded. Mask areas you do not want coated, then follow the product’s surface-preparation and application instructions. Preparation requirements can vary by liner, so use the instructions for your specific kit or aerosol.
How many cans or kits do I need for my truck bed?
Match the product’s stated coverage to the area you plan to coat, then check whether that estimate fits your bed size. The listed figures vary: Herculiner Aerosol covers 6–7 square feet per can, Rust-Oleum Truck Bed Spray Coating lists up to 20 square feet per can, and the U-POL four-quart kit lists up to 125 square feet.
Can I apply a spray liner over an existing bed coating?
Only if the liner’s instructions allow it and the existing coating is sound and properly prepared. Loose, peeling, or contaminated coating can undermine adhesion. Check compatibility and surface-preparation directions for the specific product before applying; do not assume that every spray liner can go over every existing bed coating.
Can liquid bed coating be applied without a spray gun?
Some liquid coatings allow more than one application method. Rust-Oleum Truck Bed Coating can be applied by spray, brush, or roller, according to the article’s guidance. That product is not an aerosol, so choose it if you want those application options rather than a ready-to-spray can.
Which option suits an eight-foot truck bed?
Herculiner Professional Kit is notable for its stated one-coat coverage claim for an eight-foot bed and includes a gun and rollers. Check the kit instructions and your bed’s dimensions before starting, since the stated coverage is tied to the product’s claim and may not match every bed or application.
Final Words
For a standard six-foot bed, the U-POL Raptor 4-Quart Kit is the clearest overall choice: it includes a spray gun and lists coverage up to 125 square feet. For an eight-foot bed, consider Herculiner Professional Kit’s stated one-coat coverage claim. Choose an aerosol for localized repairs, and check listed coverage against the area you need to coat before deciding how much product to use.




