Best Spare Tire Bike Rack: Compare Fit, Capacity, and Design

#1 · Best Overall

1. Allen Sports Premier S302

• Load Capacity: 70 lb
• Material: Alloy Steel
• dimensions: 14.25 x 5 x 29 in
• Compatible with Vehicle Type: Bicycle, Car

Best for: Two-bike rack with brake-light clearance.

Why it ranks #1: Fits nearly all externally mounted spare tires, including those with over-tire third brake lights, and carries up to 70 pounds on quick-set arms.

The Allen Premier S302 is listed to fit nearly all externally mounted spare tires, including setups with an over-the-tire third brake light. That specific clearance makes it a useful two-bike option for drivers whose brake-light position complicates spare-mounted rack selection.

Its 15-inch carry arms snap into place out of the box, simplifying setup, while dual-compound tie-down cradles secure and protect the bikes. The extra-wide bottom foot distributes their load on the tire, and the patented design carries bikes high and away from the road and hot exhaust. Capacity is 70 pounds for two bikes. Allen says the rack fits most rear-mounted spare tires, but specifies that it should not be used on a trailer.

Skip it if you need a rack for a trailer; Allen states that the S302 is not for trailer use.

The S302 suits drivers carrying two bikes on an externally mounted spare, especially when an over-the-tire third brake light is present. Keep the load within 70 pounds and note Allen’s trailer-use restriction.

Listed on Amazon as: Allen Sports Premier 2-Bike Spare Tire Rack, S302

#2 · Oversized Tire Fit

2. Quadratec 2-Bike Rack

• Load Capacity: 70 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Bicycle

Best for: Camera-compatible Wrangler access.

Why it ranks #2: Designed for Wrangler models and oversized tires up to 37 by 12.5 inches, with a 70-pound capacity and compatibility with JL backup cameras.

Backup-camera compatibility is a central advantage of Quadratec’s spare-tire rack: it supports uninterrupted camera use on 2018-and-newer Wrangler JL models. Its adjustable construction also accommodates factory tires and oversized spares up to 37 by 12.5 inches, giving Wrangler owners a clearly stated path to fit larger rubber.

The adjustable rack handles a range of Wrangler spare sizes, including tires up to 37 by 12.5 inches, so owners with oversized wheels have a defined fit ceiling. A swing-away design provides access to the cargo area without removing the rack, which can simplify stops when gear is stored at the rear. Nylon cinch straps secure the bikes, and thick welded steel construction with a black powder finish forms the carrier. Capacity is listed at 70 pounds.

Skip it if you need a rack for a non-Wrangler vehicle; the listed vehicle applications are Wrangler models.

Choose Quadratec for a Wrangler owner who wants camera access, oversized-spare compatibility, and swing-away cargo access. The listed tire ceiling is 37 by 12.5 inches, and the stated vehicle fit is Wrangler-specific.

Listed on Amazon as: Quadratec 2-Bike Spare Tire Mount Bike Rack – Fits Jeep Wrangler 2018-2022 JL and YJ TJ JK 1987-2018 – Adjustable Rack Fits Oversized Tires up to 37" x 12.5" – Compatible with Backup Camera on JL

#3 · Camera-Compatible Fit

3. Hollywood Racks SR1

• Load Capacity: 35 lb
• Material: Rubber
• dimensions: 13 x 12 x 7 in
• Compatible with Vehicle Type: Car, Van

Best for: Adjustable spare-tire fit.

Why it ranks #3: Adjusts to fit most externally mounted spare tires, including tires with cameras, and supports two bikes weighing up to 35 pounds each.

Fully adjustable support arms make the Hollywood Racks SR1 adaptable to most spare tires, including tires with cameras, according to its product details. That flexibility suits SUV and Jeep drivers who need to work around different spare configurations while carrying two bikes, each limited to 35 pounds.

The adjustable arms help the SR1 fit a range of externally mounted spare-tire setups, and the listed compatibility includes tires with cameras. Its two-bike format gives a compact option for trips with a 35-pound-per-bike limit. Hollywood Racks identifies SUVs, Jeeps, and off-road vehicles among compatible applications, while advising buyers to check its vehicle and spare-tire compatibility guidance. That makes the adjustment feature useful, but not a substitute for verifying the particular vehicle setup.

Skip it if you need to carry a bike over 35 pounds; this rack’s per-bike limit is 35 pounds.

Consider the SR1 for two-bike outings in an SUV or Jeep with an externally mounted spare, especially when adjustable arms help address the setup. Confirm the vehicle guidance and keep each bike within 35 pounds.

Listed on Amazon as: Hollywood Racks SR1 Spare Tire Bike Rack for 2 Bikes – Up to 35 Lbs Each

#4 · Best Three-Bike

4. Allen Sports Premier S303

• Load Capacity: 100 lb
• Material: Steel
• dimensions: 33.5 x 21.2 x 5.3 in
• Compatible with Vehicle Type: Bicycle

Best for: Quick-set three-bike carrying.

Why it ranks #4: Carries three bikes with a 100-pound load capacity, quick-set 17-inch arms, individual tie-downs, and a wide lower foot.

Seventeen-inch carry arms snap into place out of the box, giving the Allen Premier S303 a quick setup for carrying up to three bikes. Its one-hand fold-down function and 100-pound load capacity pair convenient storage with a substantial stated carrying limit for a spare-tire rack.

The snap-in arms avoid a separate assembly step, and the rack folds down with one hand when not carrying bikes. Individual tie-down cradles and straps secure each bicycle, while the extra-wide lower foot distributes the load on the rear of the vehicle. A padded lower frame keeps bikes away from the vehicle. The rack’s 100-pound capacity supports a three-bike use case, but Allen states that it should not be used on trailers.

Skip it if you need a carrier for a trailer; Allen explicitly excludes trailer use for this rack.

The S303 suits riders carrying up to three bikes who want snap-in arms, one-hand folding, and individual tie-downs. Its 100-pound capacity is the limit, and it is intended for rear-mounted spare tires, not trailers.

Listed on Amazon as: Allen Sports Premier 3-Bike Spare Tire Rack, Model S303

#5 · Flexible Capacity

5. Malone Runway

• Load Capacity: 99 lb
• Material: Alloy Steel, Plastic
• dimensions: 30.75 x 24.5 x 5.75 in
• Compatible with Vehicle Type: ATV

Best for: Three-bike spare-tire trips.

Why it ranks #5: Carries up to three bicycles and 99 pounds, with adjustable width for most tire sizes and folding storage when not in use.

A three-bike capacity and 99-pound total load limit set the Malone Runway apart for groups carrying more than two bicycles. Width adjustment and adjustable straps address different spare-tire sizes and secure the rack to the wheel, while accommodation for right- or left-wheel offset adds setup flexibility.

The adjustable width is intended to suit most tire sizes, making the rack less dependent on one spare-wheel dimension. Its straps attach the carrier to the spare, and compatibility with either right or left wheel offset helps accommodate differing wheel positions. With capacity for three bicycles and a 99-pound load limit, it serves larger riding groups, while the fold-down design makes storage easier when not in use. The product lists steel construction and ATV compatibility.

Skip it if you need to carry more than 99 pounds of bikes; that exceeds the rack’s stated total load capacity.

The Runway is a practical candidate for groups taking up to three bikes and for owners who value width adjustment, offset flexibility, and fold-down storage. Keep the combined load within 99 pounds and check the spare-tire setup.

Listed on Amazon as: Malone Runway Bike Spare Tire Rack

#6

6. Allen Sports Deluxe 2-Bike

• Load Capacity: 70 lb
• Material: Alloy Steel
• dimensions: 4.33 x 28.74 x 13.39 in
• Compatible with Vehicle Type: Bicycle, Car

Best for: Simple two-bike carrying.

Why it ranks #6: A straightforward two-bike spare tire rack with 70-pound capacity, individual tie-down cradles, and an extra-wide foot that supports weight on the tire.

An extra-wide lower foot puts the rack’s weight on the rear tire rather than the rim, a useful distinction for drivers carrying two bikes on an externally mounted spare. Allen’s narrow carry arms accommodate many frame styles and sizes, while individual tie-down cradles secure each bike for the trip.

The 15-inch carry arms provide room for two bikes, and the individual tie-down cradles keep them secured separately. Its extra-wide bottom foot supports the load on the rear tire instead of the rim, while the design holds bikes away from the road and vehicle exhaust. Quick assembly is required, and the 70-pound capacity sets a clear combined load limit. Allen says the rack fits a wide range of rear-mounted spare-tire sizes, but it should not be used on a trailer.

Skip it if you need a carrier for a trailer; this rack is explicitly not for trailer use.

Choose this Allen for two-bike trips from a vehicle with an externally mounted spare and a load within 70 pounds. Its tire-supported foot and individual cradles suit straightforward carrying, but it is not a trailer rack.

Listed on Amazon as: Allen Sports Deluxe 2-Bike Spare Tire Rack , Black

#7

7. JOYTUTUS 2-Bike Rack

• Load Capacity: 110 lb
• Material: Metal
• Compatible with Vehicle Type: Fits 25.5"-37" Diameter 10"-13.5" Width Tires

Best for: Large-tire Wrangler and Bronco use.

Why it ranks #7: Its 110-pound capacity is the highest listed, and its stated tire fit covers diameters from 25.5 to 37 inches and widths from 10 to 13.5 inches.

A stated fit range of 25.5-to-37-inch tire diameter and 10-to-13.5-inch width makes the JOYTUTUS a specifically sized option for Wrangler and Bronco owners. Its anti-wobble mechanism is intended to limit shaking during transport, and installation does not require removing the spare tire.

The broad stated tire range helps buyers check suitability against their spare before installation, while the no-removal setup avoids taking the wheel off to mount the carrier. JOYTUTUS also specifies dual stability and paint protection, pairing reduced movement with a focus on avoiding scratches and noise. The rack’s 110-pound load capacity provides the listed carrying limit. Its vehicle fit is tied to the stated tire dimensions, so measurements matter more than model name alone.

Skip it if you have a spare narrower than 10 inches or wider than 13.5; the stated tire-width range excludes it.

A strong match for Wrangler or Bronco owners whose spare measures within the listed diameter and width range and who want installation without wheel removal. Check both tire dimensions before choosing this 110-pound-capacity carrier.

Listed on Amazon as: JOYTUTUS Spare Tire Bike Rack for 2 Bikes for Wrangler & Bronco

#8

8. Surco ABT300

• Material: Alloy Steel
• Compatible with Vehicle Type: SUV, Truck

Best for: Three-bike locking top plate.

Why it ranks #8: This three-bike rack attaches between a five-lug spare tire and its mount without drilling or special tools, but its listed fit is more specific.

An integrated locking top plate distinguishes the Surco ABT300 for buyers wanting a three-bike spare-tire carrier with a built-in locking feature. Its heavy-duty plate mounts between an existing body-mounted five-lug spare-tire mount and the wheel, using no drilling or special tools for installation.

The five-lug mounting plate fits between the vehicle’s existing mount and spare tire, allowing installation without drilling or special tools. That arrangement makes the rack specific to vehicles with an external, body-mounted five-lug spare, rather than every rear tire setup. The locking top plate adds a built-in security feature, and the three-bike capacity supports larger riding groups. Surco lists alloy steel construction and compatibility with SUVs and trucks; check that the vehicle’s spare mount matches the stated configuration.

Skip it if you have a spare mounted without an external body-mounted five-lug plate; the specified installation will not match that setup.

The ABT300 fits SUV or truck owners who want three-bike capacity and an integrated locking top plate. Its mounting plate requires an external, body-mounted five-lug spare, so verify that configuration before selecting it.

Listed on Amazon as: Surco ABT300 3-Bike Spare Tire Mount Bike Rack with Integrated Lock; Black Finish

#9

9. MieyKnvo 2-Bike Rack

• Load Capacity: 70 lb
• Material: Steel
• dimensions: 24 x 14 x 4.3 in
• Compatible with Vehicle Type: Ford Bronco, Jeep Wrangler, Suv

Best for: Fold-away Wrangler or Gladiator fit.

Why it ranks #9: Designed for Wrangler and Gladiator models from 2018 to 2026, it folds for storage but excludes reverse-camera vehicles and tires wider than 255 millimeters.

A foldable rack body lets this MieyKnvo carrier stow compactly when bikes are not aboard and helps preserve access to items at the vehicle’s rear. It is specified for 2018–2026 Wrangler and Gladiator models, with a 70-pound capacity and a stated tread-width limit.

The fold-away construction supports easier storage between rides, while the built-in anti-wobble support is intended to reduce shaking and vibration on the road. Its direct spare-tire mounting avoids a separate hitch installation, and the 70-pound capacity defines the carrying ceiling. Compatibility is specific: the listing calls for tread widths of 255 mm or narrower and says vehicles with reverse-camera systems are unsuitable. Those restrictions should guide the fit decision before purchase.

Skip it if you rely on a reverse-camera system; the product listing says those vehicles are unsuitable for installation.

This suits Wrangler or Gladiator owners in the stated model-year range who want a fold-away two-bike carrier and have tread widths no greater than 255 mm. Avoid it if the vehicle has a reverse-camera system.

Listed on Amazon as: Spare Tire Bike Rack for 2 Bikes for Wrangler/Gladiator 2018-2026

#10

10. Swagman Around The Spare DLX

• Load Capacity: 6E+1 lb
• Material: Alloy Steel
• dimensions: 34 x 12 x 26 in
• Compatible with Vehicle Type: Bicycle

Best for: RV bumper-and-spare mounting.

Why it ranks #10: Although it mounts around a spare tire, this rack is designed for RV or trailer bumpers and requires a compatible four- to 4.5-inch square bumper.

The Swagman Around The Spare DLX combines mounting around a rear spare with a requirement for a 4-to-4.5-inch square, continuously welded steel bumper. That RV-and-trailer focus suits owners seeking one carrier attached to the rear bumper area while accommodating most spare tires.

Its bumper specification gives RV owners a concrete mounting check: the rack fits square, continuously welded steel bumpers measuring 4 to 4.5 inches. The carrier mounts around most spare tires, and anti-sway cradles help prevent bike-to-bike contact in transit. It carries one or two bikes, with a maximum of 30 pounds per bike and 60 pounds total. The listing also identifies a 2-inch hitch receiver or rear trailer bumper, so buyers should check the intended mounting arrangement.

Skip it if you have a bumper outside the stated 4–4.5-inch square welded-steel specification; this rack’s bumper fit does not cover it.

Choose the Swagman for an RV or trailer with the specified square welded-steel bumper and a rear spare. It carries one or two bikes, but each must stay within 30 pounds and the mounting arrangement must match.

Listed on Amazon as: Swagman Around The Spare DLX – RV Bike Rack for Trailers with Rear Bumper Mounted Spare Tires