Best RV Sliding Cargo Tray for Basement Storage

#1 · Best Overall

1. MORryde CTG80-3372-2DW

• Weight: 118 lb

Best for: Two-sided heavy cargo access.

Why it ranks #1: Its 33-by-72-inch format, 80% two-way extension, carpet flooring, and listed 500-pound capacity suit accessible general-purpose RV storage.

An 80% two-way extension lets this 33-by-72-inch MORryde tray pull through both sides of an RV storage compartment, helping owners reach cargo from either direction. Its 500-pound capacity and fully assembled carpeted platform combine substantial stated load support with a ready-to-install storage surface.

The 33-by-72-inch platform offers a wide area for organizing stored gear, and the listed 500-pound capacity gives buyers a defined load limit. Because the 80% extension pulls through both sides, cargo can be approached from either side of the compartment rather than only from the front. Ball-bearing slides support smooth travel, while included carpet and fully assembled construction reduce setup work. The listing also says no measuring or floor cutting is required, although the tray’s dimensions still need to suit the available space.

Skip it if you need an 800-pound listed capacity; MORryde CTG60-3990W specifies that limit on its 39-by-90-inch tray.

A strong fit for RV owners who want carpeted, two-sided access to cargo in a compartment suited to a 33-by-72-inch tray. Keep its 500-pound capacity and substantial footprint in mind when planning loads and installation.

Listed on Amazon as: MORryde CTG80-3372-2DW Sliding Cargo Tray with 80% Extension – 33" x 72"

#2 · Largest Two-Way Tray

2. MORryde CTG80-4272-2DW

• Weight: 134 lb

Best for: Wide two-way cargo platform.

Why it ranks #2: The 42-by-72-inch model offers 80% two-way extension, carpet flooring, and a listed 500-pound capacity for wider compartments.

A 42-by-72-inch platform paired with 80% two-way extension makes this MORryde tray a wide-format choice for reaching cargo from either side of an RV compartment. The 500-pound capacity, carpet flooring, and fully assembled construction support practical loading and access without requiring floor measuring or cutting.

The 42-inch width and 72-inch length provide a broad platform for arranging RV gear, while the 500-pound listed capacity sets a clear load boundary. Its 80% extension pulls through both sides, allowing access from either direction; ball-bearing slides support smoother movement under load. Carpet is already installed and the tray arrives fully assembled, reducing setup steps. No measuring or cutting is required according to the listing, but the large footprint still makes available compartment space an essential fit consideration.

Skip it if you need an 800-pound listed limit and a 39-by-90-inch tray; MORryde CTG60-3990W specifies both.

This fits RV owners who need a wide, carpeted platform and two-sided access for a compartment that accommodates 42 by 72 inches. Plan around its 500-pound capacity and verify that its footprint suits the available storage area.

Listed on Amazon as: MORryde CTG80-4272-2DW Sliding Cargo Tray with 80% Extension – 42" x 72"

#3 · Highest Listed Capacity

3. MORryde CTG60-3990W

• Weight: 159 lb

Best for: High-capacity large compartments.

Why it ranks #3: This 39-by-90-inch sliding tray lists an 800-pound capacity and arrives assembled with finished flooring for substantial cargo.

An 800-pound capacity distinguishes this 39-by-90-inch MORryde tray for RV owners storing substantial cargo in a wide compartment. Its finished carpeted floor arrives in an assembled platform, giving buyers a way to make stored items easier to reach without measuring or cutting a floor covering first.

The 39-by-90-inch platform provides a broad storage surface, while its listed 800-pound capacity supports heavier loads than a light-duty organizer. Finished carpeted flooring gives cargo a covered surface, and the fully assembled construction avoids floor measuring and cutting during setup. The listing says it is ready to install in minutes, which can simplify adding accessible storage. Its large dimensions and 159-pound listed item weight make compartment space and handling important considerations before installation.

Skip it if you have a smaller compartment or need a lighter platform; MORryde CTG60-2060W is a 20-by-60-inch tray weighing 12 pounds.

This suits RV owners who need a large carpeted storage platform and value its listed 800-pound capacity. Check that the compartment accommodates the 39-by-90-inch tray, and plan for handling its listed 159-pound weight.

Listed on Amazon as: MORryde CTG60-3990W Sliding Cargo Tray – 39" x 90"

#4

4. MORryde CTG60-3960W

• Weight: 16 oz

Best for: Large one-way RV storage.

Why it ranks #4: Its 39-by-60-inch tray lists an 800-pound capacity, ball-bearing slide, flooring, and a one-way pull that locks when retracted.

A 60-by-39-inch platform with a listed 800-pound capacity gives the MORryde CTG60-3960W room for substantial RV cargo. Its one-way slide-out design brings stored items toward the user, while the powder-coated finish and included flooring offer a finished surface for organizing supplies in a camper or motor-vehicle compartment.

The 60-by-39-inch dimensions provide a broad storage area, and the listed 800-pound capacity gives buyers a defined limit when planning heavy gear. Ball-bearing tracks support the slide-out operation, while the one-way pull brings cargo out from a single access side. The listing describes a powder-coated finish that resists scratches and fading, and says flooring is included. It also identifies a lock in the retracted position and a hardware kit; unlike two-way trays, its pull direction does not provide access through both sides.

Skip it if you need pull-through access from either side; MORryde CTG80-3372-2DW offers 80% two-way extension.

A fit for RV owners needing a broad, high-capacity one-way tray with flooring and a retracted-position lock. Choose it when access from one side suits the compartment, and account for its 60-by-39-inch footprint.

Listed on Amazon as: MORryde CTG60-3960W 60 x 39 Inch Slider Cargo Storage Tray for RV Camper Motor Vehicle Basement Compartment with Hardware Kit for Simple Installation

#5 · Mid-Width Tray

5. MORryde CTG60-2660W

• Weight: 94 lb

Best for: Carpeted mid-size storage.

Why it ranks #5: The 26-by-60-inch carpeted tray is fully assembled with 60% extension, offering a useful middle width for compatible compartments.

A 26-by-60-inch carpeted tray with 60% extension gives this MORryde cargo slide a defined option for RV compartments where a full pull-through platform is not required. Its fully assembled format can simplify setup, while the carpeted surface offers a finished place to arrange stored gear.

The 26-inch width and 60-inch length identify the tray’s storage footprint, helping buyers compare it with the space available in an RV compartment. Carpet flooring supplies the listed surface finish, and the fully assembled format means the tray arrives as a complete unit rather than a floor-cutting project. Its 60% extension provides partial pullout access, a useful boundary to consider when deciding how much of the compartment needs to come toward you. The supplied information does not list a load capacity.

Skip it if you require a stated load limit or two-way pull-through; MORryde CTG80-3372-2DW lists 500 pounds and two-sided access.

This is for RV owners matching a carpeted, fully assembled 26-by-60-inch tray to a compartment that needs 60% extension. Confirm that partial pullout meets your access needs, since no load capacity is supplied.

Listed on Amazon as: MORryde CTG602660W Cargo Slide

#6

6. MORryde CTG80-2072-2DW

• Weight: 100 lb

Best for: Two-way carpeted access.

Why it ranks #6: Its 20-by-72-inch carpeted tray claims 80% two-way extension and arrives assembled, though the listing gives conflicting model information.

An 80% extension with two-way travel is the defining feature of this 20-by-72-inch Morryde tray, letting users reach stored cargo from either side of a compartment. Its carpeted surface and fully assembled format add practical convenience for RV owners seeking a pullout platform with access beyond one direction.

The 20-by-72-inch footprint gives this tray a long, relatively narrow storage surface, while its 80% extension and two-way specification support access from either side. That arrangement can reduce the need to reach across the compartment to retrieve cargo. Carpet flooring provides the listed surface finish for stored items, and fully assembled construction removes tray assembly from the setup process. The supplied information does not state a load capacity, so buyers should not assume a particular maximum cargo weight.

Skip it if you need a stated load limit before choosing; MORryde CTG80-3372-2DW lists a 500-pound capacity.

A fit for RV owners who prioritize two-sided access on a 20-by-72-inch carpeted tray. Its 80% extension can help reach cargo from either side, but the supplied product information leaves load capacity unspecified.

Listed on Amazon as: Mor ryd CTG80-2072-2DW Fully Assembled 80% Extension 2 Way 20INX72IN Cargo Tray with Carpet

#7 · Narrow Tray

7. MORryde CTG60-2060W

• Weight: 12 lb

Best for: Compact compartment access.

Why it ranks #7: The 20-by-60-inch format and 60% extension fit buyers seeking a narrower cargo tray; ball-bearing slides and an easy-open latch are listed.

A 60% extension on a 20-by-60-inch footprint gives this MORryde tray a practical way to bring stored gear closer without requiring a full-width platform. Ball-bearing slides support smoother pullout, while the quick-release latch helps make opening and closing straightforward during routine RV storage access.

The 20-inch width and 60-inch length provide a defined footprint for organizing compartment cargo, and the carpeted surface helps keep items from shifting as the tray moves. Ball-bearing slides make pulling the loaded platform easier, while the easy-open latch lets you release it quickly. Because it arrives fully assembled, setup avoids assembling the tray itself. Its 60% extension is the key access boundary: it does not offer the two-sided pull-through operation described for MORryde’s 90-inch models.

Skip it if you need cargo to pull through both sides; MORryde CTG80-3372-2DW offers 80% two-way extension.

A good match for RV owners who want a ready-assembled, carpeted tray for a 20-by-60-inch storage area. Choose it when one-sided, 60% extension suits the compartment; consider a two-way model when access from both sides matters.

Listed on Amazon as: MORryde CTG60-2060W Cargo Tray with 60% Extension – 20" W x 60" L

#8

8. MORryde CTG60-2048W

• Weight: 16 oz

Best for: RV basement access.

Why it ranks #8: This RV-compatible cargo slide is a general-storage option, and its listing gives an 800-pound load capacity, but dimensions are unclear.

A pull-lever sliding design gives the MORryde CTG602048W a direct way to bring hard-to-reach basement storage closer in an RV, motorhome, or camper. Its listed 800-pound load capacity is a notable specification for buyers planning to organize heavier cargo on a sliding platform.

The pull-lever operation is intended to make stored items in a difficult-to-reach basement compartment more accessible, reducing the need to reach deep inside. The listing identifies RVs, motorhomes, and campers as compatible vehicle types, giving buyers a clear use context. A listed 800-pound load capacity provides a stated upper limit for planning cargo. However, the supplied information does not provide the tray’s usable platform dimensions or extension percentage, so buyers have fewer listed details for comparing its space and reach with a compartment.

Skip it if you need listed tray dimensions before planning a compartment; MORryde CTG60-2060W specifies a 20-by-60-inch footprint.

This suits RV, motorhome, and camper owners seeking pull-lever access to basement cargo with an 800-pound listed capacity. The key boundary is missing platform dimensions, so confirm the required space from available product information before selecting it.

Listed on Amazon as: MORryde CTG602048W Cargo Slide

#9

9. YANZLAROX 24.5-Inch Battery Tray

• Weight: 31.5 lb

Best for: Battery maintenance access.

Why it ranks #9: The 24.5-inch square steel slide has full extension, dual ball-bearing slides, and a 200-pound capacity, but targets equipment access.

Six base-mounting access holes let this YANZLAROX tray be positioned and fastened without removing its slide rails, a useful installation detail for owners fitting a battery platform. Full extension and a stated 200-pound capacity also make stored equipment easier to reach for wiring or maintenance.

The 24.5-by-24.5-inch outer dimensions define the space the tray occupies, while the listed inner area of 21.8 by 23 by 1.9 inches helps clarify usable room for equipment. Dual ball-bearing slides support smooth full-extension access, and the 200-pound capacity provides a stated load limit. Six access holes allow fastening the assembled tray without taking the rails off first. Its mechanical travel lock secures the tray for road travel, though compartment opening and mounting clearances remain important fit checks.

Skip it if you need a wider platform with a higher stated capacity; MORryde CTG80-3372-2DW measures 33 by 72 inches and supports 500 pounds.

This suits owners installing a battery or generator tray who value full-extension maintenance access and rail-in-place mounting. Check the inner dimensions, compartment opening, mounting surface, and surrounding clearance before choosing it.

Listed on Amazon as: Heavy-Duty Sliding Battery Tray, 24.5"x24.5"x2.75", RV Cargo Slide Out Tray

#10

10. ONLYLIDA 24-Inch Steel Tray

• Weight: 21.3 lb

Best for: Steel battery and generator mounting.

Why it ranks #10: This 24-by-14-inch steel slide is intended for batteries, generators, and gear, making it less suited to general RV basement cargo.

A solid-steel, 24-by-14-inch platform gives this ONLYLIDA slide a focused role: carrying batteries, generators, toolboxes, or fuel cans outside an RV’s living space. The open tray format keeps utility equipment organized on a dedicated mount, while its 2.7-inch height suits buyers considering a compact equipment platform.

The steel construction provides the listed material for supporting heavy equipment, and the 24-by-14-inch platform gives buyers a specific area to plan around. Its intended uses include batteries, portable generators, toolboxes, and fuel cans, helping separate utility gear from the RV living space. The open tray design offers an accessible platform rather than an enclosed storage box. The supplied specifications do not state a load capacity or extension distance, so buyers should not treat it as a rated substitute for a cargo tray with those figures listed.

Skip it if you need a listed capacity for a heavy load; YANZLAROX Heavy Duty 24.5-inch tray specifies a 200-pound capacity.

This is suited to RV owners seeking a steel slide-out platform for utility equipment such as a battery or generator. Its 24-by-14-inch size is a key boundary, and the listing provides no load rating.

Listed on Amazon as: 24"x14"x2.7" Heavy Duty Steel Sliding Battery Tray Generator Slide Out Tray for RV, Universal RV Storage Rack for Tools and Outdoor Gear (24"x14"x2.7")