Best Removable Ladder Racks For Pickup Trucks

#1 · Best Overall

1. JY PERFORMANCE DAC875

• Load Capacity: 800 lb
• Material: Steel
• Compatible with Vehicle Type: Truck

Best for: Wide-bed full-size haulers.

Why it ranks #1: Its 800-pound capacity, 49-to-73-inch width range, and included four J-bolt clamps directly suit removable, non-drilling pickup use.

An 800-pound tested capacity paired with an adjustable 49-to-73-inch width lets this JY PERFORMANCE rack carry long cargo above many full-size pickup beds. Its no-drill approach keeps installation from requiring permanent bed modifications, while the stated width range gives buyers a concrete starting point for checking bed compatibility.

The 10-gauge alloy-steel construction and 800-pound tested load capacity support hauling items such as ladders, lumber, kayaks, pipes, and surfboards. Its adjustable 49-to-73-inch fit serves a broad range of full-size pickup beds, and the included four J-bolt clamps enable clamp-on mounting without drilling. The main fit boundary is explicit: trucks with toolboxes, utility tracks, or tonneau covers are not compatible, so this rack is for unobstructed bed rails.

Skip it if you use a toolbox, utility track, or tonneau cover; this rack is explicitly incompatible with those bed setups.

Choose this JY PERFORMANCE rack for full-size pickup owners who want clamp-on overhead space for long cargo and an 800-pound tested capacity. Its 49-to-73-inch range does not override the stated exclusions for bed accessories.

Listed on Amazon as: Truck Bed Ladder Racks, 800 lbs Capacity, Non-Drilling

#2 · Best Clamp-On Details

2. JY PERFORMANCE DAC336

• Load Capacity: 800 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Truck

Best for: Clamp-on 800-pound haulers.

Why it ranks #2: This 800-pound alloy-steel rack specifies an upgraded J-bolt clamp system, non-drilling installation, and a one-year warranty.

Reinforced 10-gauge steel and an 800-pound evenly distributed capacity give this JY PERFORMANCE rack a clear role hauling ladders, lumber, kayaks, pipes, rooftop tents, and oversized gear. Its upgraded J-bolt clamp-on mounting installs on bed rails without drilling, helping preserve the truck bed from drilled mounting points.

The reinforced 10-gauge steel construction supports up to 800 pounds of evenly distributed weight, connecting its material and rating to substantial long-cargo hauling. J-bolt clamps mount the rack directly to truck bed rails without drilling, a useful setup choice for owners who want to avoid permanent modifications. The 73-by-10-by-31-inch dimensions provide a footprint reference for planning bed use, and included hardware accompanies the rack for installation.

Skip it if you need a stated rating for concentrated loads; this rack's 800-pound capacity applies to evenly distributed weight.

Choose this JY PERFORMANCE rack for pickup owners who want a no-drill bed-rail mount and substantial capacity for long gear. Keep the load evenly distributed and consider its listed dimensions when planning bed use.

Listed on Amazon as: Ladder Rack for Truck Non-Drilling, 800 lbs Capacity

#3 · Broad Width Range

3. VEVOR Extendable Rack

• Load Capacity: 800 lb
• Material: Steel
• Compatible with Vehicle Type: Truck

Best for: Hook-equipped wide-bed carriers.

Why it ranks #3: Its listed 800-pound capacity and 49-to-73-inch adjustment range offer broad stated fit coverage for pickup beds.

Rope hooks around the VEVOR rack give buyers added tie-down locations for oversized cargo, while its listed 800-pound capacity supports hauling items such as kayaks and surfboards. The rack adjusts across a stated 49-to-73-inch width and requires no side rails, offering flexible bed-width fit without that mounting feature.

The 49-to-73-inch adjustable width is intended to fit various pickup bed sizes, and the listing specifically says side rails are not required. Rope hooks around the rack provide places to secure oversized items, while the 800-pound maximum gives a defined cargo ceiling. Steel construction and a listed 38.6-pound product weight also help buyers assess the rack itself for handling and installation; the supplied fit information elsewhere gives a 46-to-71-inch range, so measurements merit care.

Skip it if you need one unambiguous published width range before choosing; the supplied information gives both 49-to-73 and 46-to-71 inches.

This VEVOR is for pickup owners who want rope-hook tie-down points and an 800-pound rating without side rails. Resolve the conflicting listed width ranges against your bed measurement before relying on its fit.

Listed on Amazon as: VEVOR Truck Ladder Rack, 49-73 in Width, Extendable Universal Cargo Rack

#4 · Highest Listed Capacity

4. FORWODE Extendable Rack

• Load Capacity: 800 lb
• Material: Steel
• Compatible with Vehicle Type: Truck

Best for: Expandable high-capacity haulers.

Why it ranks #4: The SPCC steel rack lists an 800-pound capacity and expandable fit for truck beds beginning at 46 inches wide.

An expandable 46-to-72-inch bed-width range gives the FORWODE rack room to suit many pickups, while its 800-pound capacity accommodates evenly distributed cargo such as kayaks, ladders, lumber, surfboards, or rooftop tents. The non-drilling format is another practical fit for buyers seeking a removable-style rack rather than a drilled installation.

SPCC steel tubing is specified alongside an 800-pound capacity for evenly distributed weight, supporting bulky loads without making the rack’s limit ambiguous. Its expandable width covers beds from 46 to 72 inches, which gives shoppers a useful measurement range before installation. FORWODE identifies the rack as non-drilling, and the included mounting bracket supports setup; the listing names broad truck compatibility, but does not give further bed-accessory exclusions.

Skip it if you need a listed capacity above 800 pounds or a rating for concentrated loads; the stated limit is for evenly distributed weight.

This FORWODE suits pickup owners who want an expandable, non-drilling rack for evenly distributed long or bulky cargo. Measure the bed against its 46-to-72-inch range and keep loads within its stated capacity.

Listed on Amazon as: Non-Drilling Truck Ladder Rack, 800 Lbs Extendable Truck Bed Rack Fits for 46-72 Inches Wide Truck Bed, Adjustable Pickup Truck Bed Ladder Keyak Rack for Most Truck

#5

5. OUTPRIZE Steel Rack

• Load Capacity: 800 lb
• Material: Iron
• Compatible with Vehicle Type: Truck

Best for: Compact-to-full-size bed haulers.

Why it ranks #5: Its 800-pound rating, 52-to-71-inch adjustment, J-bolt inclusion, and no-drill clamp-on installation make it a practical removable option.

The OUTPRIZE rack adjusts from 52 to 71 inches and is listed for most full-size and compact pickups, giving owners a broad stated bed-width range for long cargo. Its no-drill clamp-on installation avoids drilling, while rope hooks on the sides and top add dedicated places to tie down tools or loads.

Robust steel tubing supports an 800-pound capacity, and the powder coating guards against rust and corrosion. The 52-to-71-inch adjustment range and stated compatibility with most full-size and compact pickups give buyers useful fit guidance, while clamp-on installation requires no drilling. OUTPRIZE recommends indoor storage and applying truck bedliner paint at susceptible joints for complete rustproofing, so ongoing storage and joint care are part of the ownership routine.

Skip it if you want to leave a rack outdoors without joint maintenance; OUTPRIZE recommends indoor storage and bedliner paint at susceptible joints.

This OUTPRIZE suits pickup owners who want a no-drill rack for an 800-pound load and useful rope-hook locations. Its 52-to-71-inch range and recommended indoor storage and joint care should fit your truck and routine.

Listed on Amazon as: Non-Drilling Steel Truck Rack, Extendable Truck Bed Ladder Rack

#6 · Lower-Rated Clamp-On

6. MAXXHAUL 50241

• Load Capacity: 500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Truck

Best for: Tool-ready 500-pound haulers.

Why it ranks #6: The no-drill J-bolt mounting and 52-to-71-inch width suit removable use, though its 500-pound limit is below several alternatives.

Included J-bolt clamps let the MaxxHaul 50241 mount to most pickup bed rails without drilling, and its 52-to-71-inch width adjusts to different beds. The 500-pound capacity suits buyers who value removable installation and built-in tie-down anchors over the higher load ratings offered by some ladder racks.

Powder-coated alloy steel and reinforced triangular gussets are specified to resist rust and structural flex, while the rack carries up to 500 pounds across both uprights. Width adjustment from 52 to 71 inches helps it accommodate a range of pickup beds, and J-bolt clamps attach it without permanent modification. The listing says installation takes under an hour with basic hand tools, giving buyers a defined setup expectation as well as a tie-down point for securing cargo.

Skip it if you regularly haul loads above 500 pounds; the ECOTRIC RACK-A47 lists a 1,000-pound maximum capacity.

Pick the MaxxHaul 50241 for pickup owners who want a clamp-on rack with tie-down anchors and a stated under-an-hour installation. Its 500-pound limit makes it a poor match for heavier cargo plans.

Listed on Amazon as: MaxxHaul Adjustable Steel Truck Ladder Rack 500 lb Capacity 52" to 71" Width No Drill Clamp On J-Bolt Mount Heavy-Duty Rack with Tie Down Anchors for Ladders Lumber Kayaks and Cargo Transport (50241)

#7

7. FinerFurnis Heavy-Duty Rack

• Load Capacity: 1000 lb
• Compatible with Vehicle Type: Truck

Best for: Heavy-load steel haulers.

Why it ranks #7: It lists a 1,000-pound capacity and adjustable width, but excludes utility tracks, toolboxes, camper shells, and tonneau covers.

A stated 1,000-pound capacity makes the FinerFurnis rack a candidate for pickup owners moving heavy ladders, lumber, kayaks, and bulky cargo. Its adjustable width and multiple tie-down points address fit and load-securing needs, while the no-drilling installation avoids a permanent drilled mounting approach, subject to its listed vehicle and bed-accessory exclusions.

Reinforced steel construction supports the stated 1,000-pound load rating, and multiple tie-down points give buyers places to secure cargo during transport. Adjustable width helps accommodate different truck models, while the powder-coated finish is described as rust-resistant for outdoor use. The rack is listed as requiring no drilling, but the fit boundaries matter: it is not compatible with utility tracks, toolboxes or side boxes, camper shells, tonneau covers, or Ridgeline models.

Skip it if you drive a Ridgeline or use a utility track, toolbox, side box, camper shell, or tonneau cover; this rack excludes those setups.

Consider this FinerFurnis for heavy cargo when its adjustable width and tie-down points suit your hauling routine. The exclusions are substantial, so it is only a fit for trucks without the listed accessories or Ridgeline models.

Listed on Amazon as: Heavy-Duty Steel Truck Ladder RackAdjustable – 1000 lbs Capacity – Full-Size Bed Roof Rack for Lumber, Utility – No Drilling Required – Fits F150 and More

#8

8. ECOTRIC Adjustable Rack

• Load Capacity: 1000 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Truck

Best for: Long-load contractor haulers.

Why it ranks #8: Its 1,000-pound capacity and 58-to-69-inch adjustment suit heavy cargo, but the supplied details do not confirm removable clamp mounting.

The ECOTRIC rack combines a 1,000-pound maximum load with a 58-to-69-inch adjustable range, giving contractors a way to carry heavy lumber or bulky steel above a pickup bed. Automotive-grade steel and a heavy-duty powder-coat finish add material and surface details for buyers planning regular outdoor hauling.

The 58-to-69-inch adjustment range helps the rack suit different bed widths, while its 1,000-pound maximum supports the heavy lumber and bulky steel named in the listing. Automotive-grade steel is described as stable and reliable, and the powder-coat paint resists rust. Its listed dimensions extend to roughly 140 inches long, so buyers should account for the rack’s substantial length when considering storage and cargo clearance. The product arrives in two packages.

Skip it if you need a compact rack that is easy to store in a short space; the listed length is about 140 inches.

This ECOTRIC suits contractors and pickup owners carrying heavy lumber or steel who can accommodate a long rack and its 58-to-69-inch adjustment range. Plan for the listed overall length when storing or handling it.

Listed on Amazon as: ECOTRIC 1000 LBS Adjustable 58"-69" Universal Truck Bed Rack Contractor Ladder Pickup Lumber Utility Kayak Full Size Rack 60"(W) x 138"(L) x 34"(H) (Notice:You Will Receive Two Packages for This Item)

#9

9. ALMULOO Adjustable Rack

• Load Capacity: 1000 lb
• Material: Steel
• Compatible with Vehicle Type: Truck

Best for: Heavy timber and steel haulers.

Why it ranks #9: It lists 1,000-pound capacity and a 58-to-69-inch fit range, but supplied details do not establish a removable mounting method.

A 1,000-pound capacity gives the ALMULOO rack a defined role for transporting heavy timber and large steel materials over a pickup bed. Its adjustable 58-to-69-inch range accommodates different bed widths, and the listed steel construction offers buyers a clear material basis for evaluating this substantial long-cargo rack.

The rack supports up to 1,000 pounds, while its 58-to-69-inch adjustment range helps it fit different-sized truck beds. The listing describes steel construction as stable and reliable, tying the material choice to carrying heavy timber and large steel. Its dimensions are approximately 139.6 inches long and 55.1 inches wide, so storage and handling space are important considerations. Installation hardware and an instruction manual are included across two packages.

Skip it if you lack room to handle or store a rack nearly 140 inches long; its listed length is about 139.6 inches.

The ALMULOO suits pickup owners hauling heavy timber or steel who need a 1,000-pound rating and can work with its long frame. Check the bed against the 58-to-69-inch adjustment range.

Listed on Amazon as: Adjustabl Truck Ladder Rack 60" W x 138" L x 34" H Universal Truck

#10

10. MAXXHAUL 70233

• Load Capacity: 250 lb
• Material: Steel
• Compatible with Vehicle Type: Truck

Best for: Side-mount ladder carriers.

Why it ranks #10: This side-mount design holds 250 pounds and adjusts its arms from 19 to 34 inches, making it less suited to removable bed-spanning use.

Adjustable arms spanning 19 to 34 inches let the MaxxHaul 70233 accommodate a range of ladder sizes, with a side-mount format that leaves the choice of bed setup distinct from an overhead cross-bed rack. Its 250-pound capacity makes it a more focused option for ladders and other lengthy materials than heavy general cargo.

All-steel construction and a 250-pound capacity suit hauling ladders, lumber, piping, rebar, sports equipment, or landscape equipment within the stated limit. Adjustable arms from 19 to 34 inches help accommodate different ladder sizes, and multiple built-in tie-down points give users places to secure their load. Powder-coated steel resists rust and corrosion, while the uprights attach to the truck bed using included hardware. This is a side-mount rack, not a high-capacity 800- or 1,000-pound platform.

Skip it if you need to haul loads above 250 pounds; the OUTPRIZE TR-St-Rack-B lists an 800-pound capacity.

Choose the MaxxHaul 70233 if adjustable side-mount arms suit your ladder sizes and your cargo stays within 250 pounds. Its tie-down points and included mounting hardware support a focused long-material hauling setup.

Listed on Amazon as: MaxxHaul Side Mount Truck Ladder Rack 250 LB – (70233)