Best Receiver Hitch For RV: Compare Frame and Bumper Mounts

#1 · Best Overall

1. CURT 13703 Hitch

• Material: Carbon Steel
• Compatible with Vehicle Type: ATV, Marine-Personal-Craft, Trailer

Best for: Adjustable frame-mounted towing.

Why it ranks #1: Its adjustable frame-mounted design fits up to 72 inches and provides a 2-inch receiver rated at 3,500 pounds gross trailer weight and 350 pounds tongue weight.

A 72-inch maximum width gives the CURT 13703 an adjustable span for compatible RV, camper, and motorhome frames. Its 2-inch receiver can serve towing or accessory needs, while the stated 3,500-pound gross trailer weight and 350-pound tongue weight ratings provide specific capacity limits to consider alongside the RV frame and other towing components.

The adjustable design and standard 2-by-2-inch receiver let compatible RV frames accept cargo carriers, towing accessories, trailers, or a small vehicle for flat towing. Its 3,500-pound gross trailer weight and 350-pound tongue weight ratings apply only within the limits of the lowest-rated towing component, RV frame, and vehicle manufacturer. At 98.5 pounds, this hitch is a substantial component to account for during handling and installation.

Skip it if you need a lightweight bumper adapter for accessories; the 98.5-pound CURT frame hitch is a substantial installation component.

This CURT suits RV owners seeking an adjustable frame-mounted receiver for towing or accessories, including flat-towing a small vehicle. Check the frame and every towing component against the stated ratings; the hitch's maximum width is 72 inches.

Listed on Amazon as: CURT 13703 Adjustable RV Trailer Hitch, 2-Inch Receiver, 72-Inch Max

#2 · Adjustable Frame Fit

2. ALMULOO Adjustable Hitch

• Maximum Towing Capacity: 3500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: RV

Best for: Adjustable frame hitch for accessories.

Why it ranks #2: This three-piece frame hitch is rated for 3,500 pounds trailer weight and 350 pounds tongue weight, and its stated frame fit extends up to 7 inches.

A three-piece adjustable design that fits frames up to 76 inches makes the ALMULOO hitch useful when a fixed-width frame receiver is not the right match. Its 2-inch receiver accepts ball mounts, cargo racks, and bike racks, and its stated ratings are 3,500 pounds trailer weight and 350 pounds tongue weight.

Direct bolt-on installation avoids a welding step, while the three-piece adjustable layout accommodates frames up to 76 inches, according to the supplied features. The 2-inch receiver accepts common listed accessories such as ball mounts and cargo racks, but the product specifically excludes vertical hanging bike racks. Its 3,500-pound trailer-weight and 350-pound tongue-weight ratings give buyers limits to compare with their RV frame and the rest of the towing setup.

Skip it if you need to carry vertical hanging bikes; the ALMULOO hitch specifically does not support that rack style.

This ALMULOO is for RV owners who want an adjustable, direct-bolt-on frame hitch for listed accessories or towing. Check frame width against the 76-inch maximum, and choose another setup for vertical hanging bike racks.

Listed on Amazon as: Adjustable RV Trailer Hitch 2" Class 3, RV Tow Receiver Hitch Fits

#3 · Broad Accessory Use

3. KUAFU Universal Hitch

• Maximum Towing Capacity: 3500 lb
• Compatible with Vehicle Type: Trailer

Best for: Frame receiver for towing accessories.

Why it ranks #3: Its 2-inch Class 3 receiver is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight, with listed uses including ball mounts and carriers.

A 2-inch Class 3 receiver rated for 3,500 pounds gross trailer weight gives the KUAFU hitch a clear role for compatible frame-mounted towing and accessory setups. It also lists a 350-pound tongue-weight capacity and accommodates ball mounts, cargo carriers, bicycle frames, trailers, and winches among other heavy accessories.

The included hardware fastens the receiver to the frame, avoiding a need to source the listed attachment hardware separately. Its 2-inch opening accepts a range of named mounts and accessories, from ball mounts and cargo carriers to bicycle frames and winches. Heavy-duty steel and a black powder-coated finish are specified, while the 3,500-pound gross trailer weight and 350-pound tongue weight ratings set limits to check against the frame and other components.

Skip it if you need a listed adjustable frame-width range; CURT's 13703 gives a maximum width of 72 inches.

KUAFU fits buyers seeking a frame-fastened 2-inch receiver for listed towing accessories, with hardware included and explicit capacity ratings. Consider frame compatibility carefully; the supplied details do not give an adjustable-width range.

Listed on Amazon as: KUAFU Universal RV Trailer Hitch 2 Inch Class 3 Mount Receiver Tow Hitch

#4 · Frame Accessory Mount

4. Stromberg Carlson CC-300

• Material: Alloy Steel
• Compatible with Vehicle Type: Car, Trailer

Best for: Adjustable fifth-wheel accessory hitch.

Why it ranks #4: This adjustable accessory hitch creates a 2-inch receiver on trailers and fifth wheels, with bolt-on Class I or welded Class II installation options.

The Stromberg Carlson CC-300 creates a 2-inch hitch on travel trailers and fifth wheels, with a choice of bolting it on as Class I or welding it on as Class II. That installation choice makes it relevant to buyers planning a frame-mounted receiver specifically for bike racks and cargo carriers.

The CC-300's adjustable accessory-hitch format supplies a 2-inch receiver for bike racks and cargo carriers at the back of a camper, travel trailer, or fifth wheel. Bolting it on as Class I or welding it on as Class II gives two listed attachment approaches, so installation preference matters when choosing. Its supplied details do not list towing or tongue-weight capacities, making it important to keep the stated accessory use distinct from choosing a rated trailer-towing hitch.

Skip it if you need a listed towing capacity; CURT's 13703 specifies gross trailer and tongue-weight ratings.

Pick the CC-300 if you need an adjustable 2-inch accessory hitch for a camper, travel trailer, or fifth wheel and can choose between bolting and welding. Its supplied details do not establish towing capacity.

Listed on Amazon as: Stromberg Carlson CC-300 Adjustable Accessory Hitch – Hitch Receiver for Bike Rack and Carriers, Ideal for Back of Camper, Travel Trailer & RV, Camper Trailer Hitch, Adjustable Truck Hitch, Black

#5 · Higher Tongue Rating

5. METOWARE Bumper Hitch

• Maximum Towing Capacity: 3500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Car, RV, Truck

Best for: Four-inch bumper towing receiver.

Why it ranks #5: For a 4-inch square bumper, it provides a 2-inch receiver and 350-pound tongue rating; its listed 3,500-pound capacity does not establish RV-frame suitability.

A 3,500-pound maximum towing capacity makes the METOWARE receiver an option for buyers considering more than a rack mount on a 4-inch square RV bumper. Its 350-pound tongue-weight capacity and standard 2-inch receiver also accommodate listed hitch accessories, including bike racks and ball mounts, within the limits of the complete towing setup.

The 2-inch receiver is compatible with most Class III and IV ball mounts, bike racks, and cargo accessories, letting buyers use common shanks and mounts. Its stated 3,500-pound towing and 350-pound tongue-weight capacities clarify the receiver's listed limits, while high-strength alloy steel provides the specified construction. The title identifies a 4-inch square bumper fit, so buyers can compare that bumper dimension with their RV before choosing this adapter.

Skip it if you need an included hitch pin and cover; the Ohuhu RV Bumper Hitch lists both components.

Consider METOWARE if your RV has a 4-inch square bumper and you want a receiver with stated towing and tongue-weight capacities plus compatibility with common mounts. Keep the complete setup's limits in mind.

Listed on Amazon as: RV Bumper Hitch Receiver Fits 4" Square Bumper, 3500 LBS Capacity

#6

6. TOPTOW Bumper Receiver

• Maximum Towing Capacity: 3500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: 4" X 4" RV REAR BUMPER

Best for: Four-inch bumper accessory mount.

Why it ranks #6: This receiver fits 4-by-4-inch bumpers and has a 350-pound tongue rating, but the listing cautions that it is not intended for RV trailer towing.

A receiver that can mount upside down gives the TOPTOW bumper hitch an extra installation orientation for compatible 4-by-4-inch square bumpers. Its 2-inch opening accepts many bike racks and cargo carriers, while the stated 350-pound tongue-weight capacity helps define its accessory-carrying limit. TOPTOW specifically warns that this receiver is not for RV-level trailer towing.

The bolt-on design secures around a 4-by-4-inch bumper, and the instructions emphasize tightening the bolts securely. The ability to mount upside down adds an orientation choice without changing the listed bumper size. A 2-inch receiver fits many bike racks and cargo carriers with matching shanks, while the 350-pound tongue-weight capacity is relevant when loading accessories. A 5/8-inch hitch pin or lock is not included, so plan for that separately.

Skip it if you need a receiver for RV-level trailer towing; TOPTOW explicitly excludes that use.

Pick this TOPTOW for accessory mounting on a 4-by-4-inch bumper when upside-down installation is useful. Its 350-pound tongue-weight rating and explicit no-trailer-towing warning make the intended boundary important to observe.

Listed on Amazon as: TOPTOW RV Bumper Hitch Receiver for 4in x 4in Beams,2in Receiver | Fits for Bike Racks, Cargo Carriers Camper-on, 3500lbs

#7

7. Fioracl Adjustable Receiver

• Maximum Towing Capacity: 3500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: Adjustable-width bumper accessory mount.

Why it ranks #7: Its adjustable design is stated to accommodate steel beams from 2.5 to 4 inches and offers a 2-inch opening for accessories; capacity details need careful verification.

An adjustable clamp that accommodates different steel-beam widths and heights is the defining feature of this Fioracl bumper receiver. It is intended to lock tightly around the beam to reduce movement, while the 2-inch opening fits many bike racks, cargo carriers, hitch steps, and RV tire racks with matching shanks.

Unlike a receiver specified for one bumper dimension, this model's adjustable design is described as accommodating different beam widths and heights. That gives buyers more flexibility when matching a steel bumper beam, with the clamp intended to hold it securely and limit shaking. The 2-by-2-inch receiver takes many listed accessories, including bike racks and cargo carriers. The product details also state a 3,500-pound maximum towing capacity; check the intended application and full setup limits.

Skip it if you require a stated tongue-weight limit; Nilight's 92116B lists a 200-pound tongue-weight capacity.

Choose Fioracl if your bumper beam's width or height calls for an adjustable clamp and you need a 2-inch accessory receiver. Its stated towing capacity does not provide a tongue-weight figure, so account for that limitation.

Listed on Amazon as: RV Bumper Hitch Receiver 2 inch Adapter for 2.5 inch to 4 inch Beams, Trailer Hitch Receiver, Fits for Cargo Carrier Bike Racks

#8

8. Ohuhu Bumper Hitch

• Maximum Towing Capacity: 3500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: Bumper receiver with pin and cover.

Why it ranks #8: Designed for a 4-by-4-inch RV bumper, it includes a hitch pin and cover and is intended for racks and other accessories rather than confirmed towing.

A hitch pin and receiver cover are included with the Ohuhu bumper hitch, so the basic receiver setup comes with both a securing component and a cap for unused times. It fits 4-by-4-inch RV or travel-trailer bumpers and provides a 2-inch opening for listed accessories such as bike and cargo racks.

Installation does not require welding: the receiver attaches to the bumper for mounting compatible racks and other accessories. The included hitch pin supports securing the mounted accessory, while the hitch cover caps the receiver when it is not in use. Its E-coat and black powder-coat finish is specified to help resist rust and corrosion. The 4-by-4-inch bumper fit is a key boundary, and the supplied details list a 3,500-pound maximum towing capacity.

Skip it if you need a stated tongue-weight capacity; Nilight's 92116B specifies 200 pounds for that rating.

This Ohuhu suits owners with a 4-by-4-inch bumper who value an included pin and cover for accessory use. Its coating supports corrosion resistance, but the supplied details do not give a tongue-weight rating.

Listed on Amazon as: Ohuhu RV Bumper Hitch 2" Receiver Adapter with Hitch Pin and Hitch Cover

#9

9. Nilight Bumper Hitch

• Material: Alloy Steel, Carbon Steel
• Compatible with Vehicle Type: Trailer

Best for: Two-inch bumper accessory receiver.

Why it ranks #9: Its 2-inch receiver fits 4-to-4.5-inch beams and is rated at 2,000 pounds gross trailer weight and 200 pounds tongue weight, subject to the lowest-rated component.

A 2-inch receiver opening lets this Nilight bumper hitch accept many bike racks and cargo carriers with matching shanks. It fits beams from 4 to 4.5 inches and uses a bolt-on design, giving buyers a defined bumper range to check before installation. The stated limits are 2,000 pounds gross trailer weight and 200 pounds tongue weight.

The bolt-on steel receiver is specified for 4-to-4.5-inch beams, which gives its fit a narrower, explicit range than a generic bumper mount. Its 2-by-2-inch opening accommodates many racks and carriers with 2-inch shanks, while the 200-pound tongue-weight limit informs accessory loading. The listed 2,000-pound gross trailer weight is subject to the lowest-rated towing component, so it should not be treated as the only limit in a towing setup.

Skip it if you need a 350-pound tongue-weight rating; TOPTOW's TTRV801 lists that capacity for accessory use.

This Nilight suits buyers with a 4-to-4.5-inch bumper beam who want a bolt-on receiver for compatible racks or carriers. Its 200-pound tongue-weight and 2,000-pound gross-trailer-weight ratings define the limits to assess.

Listed on Amazon as: Nilight RV Bumper Hitch Receiver Fits for 4-4.5 inches Beams 2 inch Receiver 200 LBS Capacity Bolt-On Heavy Duty Steel for Camper Bike Racks Cargo Carriers

#10

10. MaxxHaul 50173 Adapter

• Material: Alloy Steel
• Compatible with Vehicle Type: RV

Best for: Four-inch bumper accessory adapter.

Why it ranks #10: This adapter fits 4-inch square RV bumpers and provides a 2-inch receiver with 200-pound tongue capacity, but explicitly is not for trailer towing.

A 2-inch receiver for a 4-inch square RV bumper gives this MaxxHaul adapter a focused job: adding a mounting point for compatible hitch accessories. Its 200-pound tongue-weight capacity and all-steel construction suit buyers who want to add options such as a bike rack or RV tire carrier without a separate frame hitch.

The 2-by-2-inch opening accepts accessories with a 2-inch shank, including bike racks, RV tire carriers, and hitch steps, so one receiver can serve several accessory needs. Its specified fit is a 4-inch square bumper, making bumper dimensions the key installation consideration. The 200-pound tongue-weight limit sets a clear boundary for loaded accessories. MaxxHaul explicitly says this adapter is not for RV-level trailer towing; cargo-carrier use also calls for caution.

Skip it if you need a receiver for trailer towing; this adapter is explicitly not intended for that purpose.

Choose this MaxxHaul adapter if your RV has a 4-inch square bumper and you need a receiver for compatible accessories such as a bike rack or tire carrier. Keep its 200-pound tongue-weight limit and towing restriction in view.

Listed on Amazon as: MaxxHaul 50173 Hitch Receiver 2" x 2" Adapter for 4 inch Square RV Bumpers