Best Receiver Hitch For Back Of Travel Trailer

Best Receiver Hitch For Back Of Travel Trailer

A strong receiver hitch for the back of a travel trailer should match the trailer’s frame or bumper and the accessory you plan to carry. For a frame-mounted option, Stromberg Carlson CC-300 leads this group: it adds a 2-inch receiver and can be bolted on as Class I or welded on as Class II. Buyers who only need a receiver for a bike rack or cargo carrier may instead prefer a bumper adapter, but must match the bumper dimensions and observe its tongue-weight limit.

These products are not interchangeable, and some are explicitly not intended for towing another trailer. Compare the mounting method, receiver opening and ratings against your trailer documentation and every component in the setup before choosing.

Stromberg Carlson CC-300 is the leading choice for a travel-trailer rear receiver because it is specifically described for travel trailers and fifth wheels, provides a 2-inch hitch, and offers bolted Class I or welded Class II mounting to the frame. It is intended for bike racks and cargo carriers. Confirm the trailer frame can accept the installation and check the accessory load against the limits of the hitch, frame and other components before use.

Our Top Picks

Stromberg Carlson CC-300Best Overall

Stromberg Carlson CC-300

Specifically made for travel trailers and fifth wheels, it creates a 2-inch receiver and supports bolted Class I or welded Class II frame mounting.

View on Amazon
CURT 13703Highest Capacity

CURT 13703

Adds a 2-inch receiver to compatible RV frames and lists 3,500-pound gross trailer and 350-pound tongue ratings, subject to component and frame limits.

View on Amazon
KUAFU GO-1241Frame-Mount Option

KUAFU GO-1241

Designed for travel trailers and fifth wheels, with Class I bolted or Class II welded frame installation and stated tongue ratings of 200 or 300–350 pounds.

View on Amazon

Compare Rear Hitch Options for Travel Trailers

#ProductMaterialCompatible with Vehicle TypeMaximum Towing CapacityBuy
1Alloy SteelCar, Trailer—View on Amazon
2
CURT 137032. CURT 13703Highest Capacity
Carbon SteelATV, Marine-Personal-Craft, Trailer—View on Amazon
3
KUAFU GO-12413. KUAFU GO-1241Frame-Mount Option
—Marine-Personal-Craft, Trailer350 lbView on Amazon
4
HECASA NN11594. HECASA NN1159Adjustable powder-coated RV hitch
Alloy SteelTrailer—View on Amazon
5
ALMULOO Adjustable Hitch5. ALMULOO Adjustable HitchBolt-on adjustable RV receiver
Alloy SteelRV3500 lbView on Amazon
6
TOPTOW TTRV8016. TOPTOW TTRV801Bumper-Mount Pick
Alloy Steel4" X 4" RV REAR BUMPER3500 lbView on Amazon
7
MaxxHaul 501737. MaxxHaul 50173Four-inch bumper rack adapter
Alloy SteelRV—View on Amazon
8
Nilight 92116B8. Nilight 92116BFour-to-4.5-inch bumper receiver
Alloy Steel, Carbon SteelTrailer—View on Amazon
9
Fioracl Adjustable Adapter9. Fioracl Adjustable AdapterAdjustable-width bumper adapter
Alloy SteelTrailer3500 lbView on Amazon
10
METOWARE Bumper Hitch10. METOWARE Bumper HitchFour-inch bumper rack receiver
Alloy SteelCar, RV, Truck3500 lbView on Amazon

Detailed Reviews: Best Receiver Hitch For Back Of Travel Trailer

Stromberg Carlson CC-300

#1 · Best Overall

1. Stromberg Carlson CC-300

  • Material: Alloy Steel
  • Compatible with Vehicle Type: Car, Trailer

Best for: Frame-mounted trailer accessory hitch.

Why it ranks #1: Specifically made for travel trailers and fifth wheels, it creates a 2-inch receiver and supports bolted Class I or welded Class II frame mounting.

A choice between bolted Class I and welded Class II mounting sets the Stromberg Carlson CC-300 apart. It adds a 2-inch receiver to a travel trailer or fifth wheel, giving owners a place to mount a bike rack or cargo carrier without relying on a bumper-mounted adapter.

The adjustable hitch mounts to the trailer frame, and its two installation options let the installer choose a bolted Class I setup or a welded Class II setup. Its standard 2-inch receiver accommodates bike racks and cargo carriers, making it useful for adding accessory space at the rear. Alloy-steel construction is specified, and the 46.9-pound listed weight is worth considering when planning installation. The supplied details do not state a load rating.

Pros
  • Adds a 2-inch receiver to travel trailers and fifth wheels
  • Can be bolted on as Class I or welded on as Class II
  • Intended for bike racks and cargo carriers
  • Made from alloy steel
Cons
  • The supplied product details do not specify a load rating.

Skip it if you need a stated tongue-weight or trailer-weight rating; the listing provides neither for this hitch.

This suits travel-trailer or fifth-wheel owners seeking a frame-mounted receiver for bike racks or cargo carriers and who can choose a bolted or welded installation. Its supplied information does not give a capacity rating, so it is a poor match when that figure is essential.

Full product details
BrandStromberg Carlson
Compatible with Vehicle TypeCar, Trailer
Included ComponentsStromberg Carlson Product CC-300 Accessory Hitch Adjustable
Item Weight46.9 pounds
ManufacturerStromberg Carlson Products, Inc.
Part NumberCC-300
Manufacturer Warranty DescriptionPlease contact us if you experience any issues within 30 days of receipt.
MaterialAlloy Steel
Model NumberCC-300
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Listed on Amazon as: Stromberg Carlson CC-300 Adjustable Accessory Hitch – Hitch Receiver for Bike Rack and Carriers, Ideal for Back of Camper, Travel Trailer & RV, Camper Trailer Hitch, Adjustable Truck Hitch, Black

View on Amazon
CURT 13703

#2 · Highest Capacity

2. CURT 13703

  • Material: Carbon Steel
  • Compatible with Vehicle Type: ATV, Marine-Personal-Craft, Trailer

Best for: Adjustable frame-mounted receiver.

Why it ranks #2: Adds a 2-inch receiver to compatible RV frames and lists 3,500-pound gross trailer and 350-pound tongue ratings, subject to component and frame limits.

A 72-inch maximum width gives the CURT 13703 a broad frame span for adding a 2-inch receiver to a compatible RV, camper, or motorhome. Its listed ratings are 3,500 pounds gross trailer weight and 350 pounds tongue weight, subject to the lowest-rated component and vehicle limits.

The adjustable frame-mounted design provides a standard 2-by-2-inch receiver for accessories, cargo carriers, trailers, or small-vehicle towing. That range of uses can help RV owners choose one receiver for different kinds of trips, while the 72-inch maximum offers a defined frame-width boundary. The stated 3,500-pound gross trailer and 350-pound tongue ratings are not standalone guarantees: the listing limits use to the lowest-rated towing component, RV frame capacity, and vehicle-maker limits. It is not rated for weight-distribution use.

Pros
  • Adjustable design spans up to 72 inches
  • Adds a standard 2-by-2-inch receiver to compatible RV frames
  • Rated at 3,500 pounds gross trailer weight and 350 pounds tongue weight
  • Can serve accessories, cargo carriers, trailers, or small-vehicle towing
Cons
  • Not rated for weight-distribution use.

Skip it if you need a hitch rated for weight-distribution use; the CURT 13703 listing expressly excludes that setup.

This is a fit for RV owners wanting an adjustable frame-mounted receiver for accessories or supported towing uses. Check the 72-inch maximum and respect the lowest-rated component, RV frame capacity, and vehicle limits before selecting it.

Full product details
BrandCURT
Compatible with Vehicle TypeATV, Marine-Personal-Craft, Trailer
Included ComponentsRV Trailer Hitch
Item Weight98.5 pounds
ManufacturerCurt Manufacturing
Part Number13703
Manufacturer Warranty DescriptionLimited Lifetime
MaterialCarbon Steel
Model Number13703

Listed on Amazon as: CURT 13703 Adjustable RV Trailer Hitch, 2-Inch Receiver, 72-Inch Max

View on Amazon
KUAFU GO-1241

#3 · Frame-Mount Option

3. KUAFU GO-1241

  • Compatible with Vehicle Type: Marine-Personal-Craft, Trailer
  • Maximum Towing Capacity: 350 lb

Best for: Bolted or welded frame hitch.

Why it ranks #3: Designed for travel trailers and fifth wheels, with Class I bolted or Class II welded frame installation and stated tongue ratings of 200 or 300–350 pounds.

Two frame-installation routes distinguish the KUAFU: it can be bolted on as Class I or welded as Class II. The 2-inch hitch is listed for travel trailers and fifth wheels, with use cases including bikes, popup campers, and boat trailers, subject to the stated tongue-weight limits.

The bolt-on Class I configuration lists a maximum tongue weight of 200 pounds, while the welded Class II configuration lists 300–350 pounds. That difference makes installation method central to choosing how to use the hitch; the listing does not make the figures interchangeable. Its 2-inch receiver is intended for a range of trailer and accessory applications, including bikes, popup campers, and fishing-boat trailers. Steel construction and a powder-coat finish are specified for the hitch.

Pros
  • 2-inch hitch listed for travel trailers and fifth wheels
  • Can be bolted onto the frame as Class I
  • Can be welded to the frame as Class II
  • Powder-coated steel construction
Cons
  • The listed tongue-weight limit varies by installation: 200 pounds bolted, 300–350 pounds welded.

Skip it if you need the same listed tongue-weight limit for both mounting methods; KUAFU gives different figures for bolted and welded setups.

Consider this for a travel-trailer or fifth-wheel owner who can select the stated bolted or welded frame installation and wants a 2-inch hitch for listed trailer or bike uses. The mounting method determines which tongue-weight figure applies.

Full product details
BrandKUAFU
Compatible with Vehicle TypeMarine-Personal-Craft, Trailer
Item Weight25.86 kg
ManufacturerScarman LLC
Part NumberGO-1241
Maximum Towing Capacity350 pounds
Model NumberGO-1241

Listed on Amazon as: KUAFU 2" Towing Hitch Receiver for Travel Trailers and Fifth Wheels

View on Amazon
HECASA NN1159

#4

4. HECASA NN1159

  • Material: Alloy Steel
  • Compatible with Vehicle Type: Trailer

Best for: Adjustable powder-coated RV hitch.

Why it ranks #4: Its title identifies an adjustable steel hitch with a 2-inch receiver for universal RV, travel-trailer and fifth-wheel use, though no capacity is listed.

An adjustable layout and 2-inch receiver are the defining details of the HECASA NN1159. Its title identifies it as a steel hitch for RV travel trailers and fifth wheels, with a black powder-coated finish, making it an option for buyers seeking a receiver rather than a bumper adapter.

The adjustable configuration offers a different mounting approach from a fixed bumper receiver, while the 2-inch opening gives the hitch a standard receiver format for compatible accessories. HECASA lists alloy steel construction and a powder-coated finish, details that identify the material and surface treatment. The product is specified for trailer use, but the supplied specifications do not state a load rating, frame-width range, or included mounting hardware. Buyers therefore have limited listed information for planning capacity and installation.

Pros
  • Adjustable trailer-hitch configuration
  • 2-inch receiver identified in the title
  • Alloy-steel construction
  • Black powder-coated finish
Cons
  • The supplied specifications do not state a load rating or frame-width range.

Skip it if you need a listed capacity or frame-width range before choosing; the supplied HECASA specifications provide neither.

This may suit trailer owners looking for an adjustable, powder-coated steel hitch with a 2-inch receiver. Its listing identifies the general application but does not supply capacity or frame-width figures, making it a limited-information choice for buyers who need those details.

Full product details
BrandHECASA
Compatible with Vehicle TypeTrailer
ManufacturerHECASAUSA
Part NumberNN1159
MaterialAlloy Steel
Model NumberNN1159

Listed on Amazon as: HECASA Adjustable Trailer Hitch with 2'' Receiver Compatible Universal RV Travel Fifth Wheel Steel Black Powder Coated (NN1159)

View on Amazon
ALMULOO Adjustable Hitch

#5

5. ALMULOO Adjustable Hitch

  • Material: Alloy Steel
  • Compatible with Vehicle Type: RV
  • Maximum Towing Capacity: 3500 lb

Best for: Bolt-on adjustable RV receiver.

Why it ranks #5: The adjustable 2-inch RV receiver lists 3,500-pound trailer and 350-pound tongue ratings; it is a frame-style option, but excludes vertical-hanging bike racks.

A three-piece adjustable design that fits frames up to 74 inches gives the ALMULOO hitch a defined range for RV installations. Its 2-inch receiver is listed for ball mounts, cargo racks, and bike racks, with stated ratings of 3,500 pounds trailer weight and 350 pounds tongue weight.

The direct bolt-on installation and three-piece adjustability can help match the hitch to an RV frame within its stated 74-inch maximum. A 2-inch receiver accommodates several common accessories, including ball mounts, cargo racks, and bike racks. The steel construction is listed alongside 3,500-pound trailer and 350-pound tongue ratings. There is an important accessory boundary: the listing says it does not support vertical-hanging bike racks, so buyers should check their rack style as well as the frame span.

Pros
  • Three-piece adjustable design fits frames up to 74 inches
  • Direct bolt-on installation
  • 2-inch receiver suits listed ball mounts and cargo racks
  • Rated for 3,500 pounds trailer weight and 350 pounds tongue weight
Cons
  • Does not support vertical-hanging bike racks.

Skip it if you use a vertical-hanging bike rack; the ALMULOO listing says that rack style is unsupported.

This suits RV owners with a frame within the stated 74-inch maximum who want a bolt-on receiver for compatible accessories. It is not the choice for vertical-hanging bike racks, and its ratings remain subject to the limits of the complete setup.

Full product details
BrandALMULOO
Compatible with Vehicle TypeRV
Included Components1 X Trailer Hitch
ManufacturerAinuosen
Part NumberAI-2445
Manufacturer Warranty DescriptionNot Applicate
MaterialAlloy Steel
Maximum Towing Capacity3500 pounds
Model NumberAI-2445

Listed on Amazon as: Adjustable RV Trailer Hitch 2" Class 3, RV Tow Receiver Hitch Fits

View on Amazon
TOPTOW TTRV801

#6 · Bumper-Mount Pick

6. TOPTOW TTRV801

  • Material: Alloy Steel
  • Compatible with Vehicle Type: 4" X 4" RV REAR BUMPER
  • Maximum Towing Capacity: 3500 lb

Best for: Four-inch bumper accessory mount.

Why it ranks #6: Fits 4-by-4-inch square RV bumpers and offers a 2-inch opening with 350-pound tongue capacity for accessories, but is not intended for trailer towing.

A receiver that clamps around a 4-by-4-inch square RV bumper makes the TOPTOW TTRV801 a direct option for adding accessory space. Its 2-inch opening fits many bike-rack and cargo-carrier shanks, while the listing specifies a 350-pound tongue-weight capacity and warns against RV-level trailer towing.

The bumper-mounted design is intended for 4-by-4-inch square bumpers and can be mounted upside down, offering some flexibility in positioning. Its 2-by-2-inch receiver accepts many accessories with a 2-inch shank, including bike racks and cargo carriers. TOPTOW says the bolts need to be secured tightly around the bumper, a practical installation point for owners preparing the mount. The hitch pin or lock is not included, and the product is explicitly not intended for towing a trailer behind an RV.

Pros
  • Fits 4-by-4-inch square RV bumpers
  • 2-by-2-inch receiver fits many 2-inch accessory shanks
  • Can be mounted upside down
  • Specified 350-pound tongue-weight capacity
Cons
  • Not intended for RV-level trailer towing; hitch pin or lock is not included.

Skip it if you plan to tow a trailer behind your RV; this receiver is expressly not intended for that purpose.

Choose it if your RV has a 4-by-4-inch square bumper and you want a 2-inch mount for compatible racks or carriers. Keep its stated towing-purpose warning in mind, and plan separately for a 5/8-inch hitch pin or lock.

Full product details
BrandTOPTOW
Compatible with Vehicle Type4" X 4" RV REAR BUMPER
Item Weight4.45 kg
ManufacturerTOPTOW
Part Number63803
MaterialAlloy Steel
Maximum Towing Capacity3500 pounds
Model NumberTTRV801

Listed on Amazon as: TOPTOW RV Bumper Hitch Receiver for 4in x 4in Beams,2in Receiver | Fits for Bike Racks, Cargo Carriers Camper-on, 3500lbs

View on Amazon
MaxxHaul 50173

#7

7. MaxxHaul 50173

  • Material: Alloy Steel
  • Compatible with Vehicle Type: RV

Best for: Four-inch bumper rack adapter.

Why it ranks #7: Fits 4-inch square RV bumpers and accepts 2-inch-shank accessories, with a 200-pound tongue limit; the description cautions against trailer towing.

The MaxxHaul 50173 turns a 4-inch square RV bumper into a 2-by-2-inch receiver for accessory shanks. Its 200-pound tongue-weight capacity is specifically relevant to rack and carrier buyers, while the listing cautions that it is not intended for RV-level trailer towing.

The bumper adapter is made for a 4-inch square bumper and accepts 2-inch-shank accessories such as bike racks, RV tire carriers, and hitch steps. That standard opening gives owners a way to mount common rear accessories without changing the bumper itself. The listing specifies a 200-pound tongue capacity and heavy-duty all-steel construction with rust-resistant properties. It also cautions against RV-level trailer towing and cargo-carrier use, so the stated accessory compatibility should be weighed alongside those use limits.

Pros
  • Fits 4-inch square RV bumpers
  • Provides a 2-by-2-inch receiver for 2-inch-shank accessories
  • Listed for bike racks, RV tire carriers, and hitch steps
  • 200-pound tongue capacity and all-steel construction
Cons
  • Not intended for RV-level trailer towing, and the listing cautions against cargo-carrier use.

Skip it if you need to tow a trailer behind the RV or use a cargo carrier; the listing cautions against those applications.

Choose this for a 4-inch square bumper and compatible accessories such as a bike rack, tire carrier, or hitch step. Its 200-pound tongue rating and explicit use cautions make it unsuitable when RV-level trailer towing is the goal.

Full product details
BrandMAXXHAUL
Compatible with Vehicle TypeRV
Included Components50173
ManufacturerMaxxHaul
Part Number50173
Manufacturer Warranty Description90 days
MaterialAlloy Steel
Model Number50173
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including bisphenol A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Listed on Amazon as: MaxxHaul 50173 Hitch Receiver 2" x 2" Adapter for 4 inch Square RV Bumpers

View on Amazon
Nilight 92116B

#8

8. Nilight 92116B

  • Material: Alloy Steel, Carbon Steel
  • Compatible with Vehicle Type: Trailer

Best for: Four-to-4.5-inch bumper receiver.

Why it ranks #8: Fits 4-to-4.5-inch beams and provides a 2-inch receiver; its listed limits are 2,000 pounds gross trailer weight and 200 pounds tongue weight.

A stated fit for beams from 4 to 4.5 inches gives the Nilight 92116B a broader bumper-size range than a single-size receiver. Its 2-inch opening fits many bike racks and cargo carriers with matching shanks, and the listing specifies 2,000 pounds gross trailer weight and 200 pounds tongue weight.

The bolt-on receiver targets 4-to-4.5-inch beams and provides a standard 2-by-2-inch opening, connecting the bumper to many compatible bike racks and cargo carriers. Nilight lists a 2,000-pound gross trailer-weight rating and 200-pound tongue-weight rating, both limited by the lowest-rated component. Alloy and carbon steel are specified materials. The stated beam range gives buyers a clear sizing reference, while the capacity figures help define the listed operating limits for a matched setup.

Pros
  • Fits beams from 4 to 4.5 inches
  • Bolt-on installation
  • 2-by-2-inch receiver fits many compatible bike racks and cargo carriers
  • Lists 2,000-pound gross trailer and 200-pound tongue capacities
Cons
  • The stated 200-pound tongue-weight limit is lower than the listed gross trailer-weight capacity.

Skip it if you need a tongue-weight rating above 200 pounds; this Nilight receiver lists a 200-pound limit.

This suits owners with a 4-to-4.5-inch beam seeking a bolt-on 2-inch receiver for compatible racks or carriers. Keep its 200-pound tongue limit and 2,000-pound gross trailer rating in view when matching it to the rest of the setup.

Full product details
BrandNilight
Compatible with Vehicle TypeTrailer
Included ComponentsBumper Hitch Receiver
Item Weight3.76 kg
ManufacturerNilight
Part Number92116B
Manufacturer Warranty Description2 Years Warranty
MaterialAlloy Steel, Carbon Steel
Model Number92116B

Listed on Amazon as: Nilight RV Bumper Hitch Receiver Fits for 4-4.5 inches Beams 2 inch Receiver 200 LBS Capacity Bolt-On Heavy Duty Steel for Camper Bike Racks Cargo Carriers

View on Amazon
Fioracl Adjustable Adapter

#9

9. Fioracl Adjustable Adapter

  • Material: Alloy Steel
  • Compatible with Vehicle Type: Trailer
  • Maximum Towing Capacity: 3500 lb

Best for: Adjustable-width bumper adapter.

Why it ranks #9: Its adjustable bumper design is described for steel beams of varying width and height, with a 2-inch receiver for accessories and a listed 3,500-pound capacity.

Adjustability across different steel-beam widths and heights is the Fioracl receiver’s key distinction. The 2-by-2-inch opening is listed for common bike racks, cargo carriers, hitch steps, and RV tire racks, while a locking adjustment is intended to hold the beam without shaking.

Unlike a receiver specified for one bumper size, this adapter is described as adjustable for different steel-beam widths and heights. Its locking adjustment is intended to secure the beam, which may help keep the mounted receiver steady. The standard 2-by-2-inch opening accepts many listed accessories, including bike racks, cargo carriers, hitch steps, and tire racks. Alloy steel and a 3,500-pound maximum towing capacity are listed; the product details do not state a tongue-weight figure.

Pros
  • Adjusts to different steel-beam widths and heights
  • Locking adjustment is intended to limit movement
  • 2-by-2-inch receiver fits listed accessory types
  • Alloy-steel construction with a stated 3,500-pound maximum towing capacity
Cons
  • The supplied specifications do not state a tongue-weight capacity.

Skip it if you need a listed tongue-weight capacity; Fioracl supplies a maximum towing figure but no tongue-weight figure.

This fits buyers whose bumper beam needs an adjustable-width and height clamp and who want a 2-inch receiver for listed accessories. Its stated towing capacity does not replace the missing tongue-weight figure when that rating matters to your setup.

Full product details
BrandFioracl
Compatible with Vehicle TypeTrailer
Item Weight4.7 kg
ManufacturerFioracl
Part NumberBXGLJQ2
MaterialAlloy Steel
Maximum Towing Capacity3500 pounds
Model Number0442b2a0-e3fb-494b-bc49-3f8ce75f491c

Listed on Amazon as: RV Bumper Hitch Receiver 2 inch Adapter for 2.5 inch to 4 inch Beams, Trailer Hitch Receiver, Fits for Cargo Carrier Bike Racks

View on Amazon
METOWARE Bumper Hitch

#10

10. METOWARE Bumper Hitch

  • Material: Alloy Steel
  • Compatible with Vehicle Type: Car, RV, Truck
  • Maximum Towing Capacity: 3500 lb

Best for: Four-inch bumper rack receiver.

Why it ranks #10: A 4-inch square-bumper receiver with a 2-inch opening and 350-pound tongue rating, but the listing does not establish frame-mounted travel-trailer compatibility.

A 4-inch square-bumper fit gives the METOWARE receiver a specific mounting target for RV owners adding rear accessories. Its 2-inch hitch format is listed as compatible with most Class III and IV ball mounts, bike racks, and cargo carriers, with a stated 350-pound tongue-weight capacity.

This bumper receiver combines a standard 2-inch hitch format with a 4-inch square-bumper application, so buyers can match it to common accessory shanks and the listed bumper size. The stated 350-pound tongue capacity describes its downward-load rating, while the product also lists a 3,500-pound maximum towing capacity. High-strength alloy steel is specified for construction. Its listed compatibility includes ball mounts, bike racks, and cargo carriers, making it a versatile accessory point when the bumper matches.

Pros
  • Fits a 4-inch square bumper
  • 2-inch receiver is listed for most Class III and IV ball mounts
  • Compatible with bike racks and cargo carriers
  • Lists 350-pound tongue and 3,500-pound towing capacities
Cons
  • Its listed bumper application is limited to 4-inch square bumpers.

Skip it if you have a bumper outside the listed 4-inch square size; the specified application does not cover it.

The METOWARE is for owners with a 4-inch square RV bumper seeking a 2-inch receiver for racks, carriers, or compatible ball mounts. Treat its capacity figures as subject to the ratings of the other components in your setup.

Full product details
BrandMETOWARE
Compatible with Vehicle TypeCar, RV, Truck
Included Components1*rv bumper hitch receiver
ManufacturerMETOWARE
Part Number79961
Manufacturer Warranty Description1 Year Manufacturer
MaterialAlloy Steel
Maximum Towing Capacity3500 pounds
Model Number79961

Listed on Amazon as: RV Bumper Hitch Receiver Fits 4" Square Bumper, 3500 LBS Capacity

View on Amazon

Avoid the rear-hitch towing trap

A receiver that accepts an accessory does not automatically make the travel trailer safe for towing another trailer. TOPTOW TTRV801 explicitly says it is not intended for RV-level trailer towing, and MaxxHaul 50173 likewise cautions against that use. Their listed 350-pound and 200-pound tongue capacities are not permission to tow a trailer; they describe limits that must be interpreted for the intended application.

Even a frame-mounted CURT 13703, rated at 3,500 pounds gross trailer weight and 350 pounds tongue weight, says the lowest-rated component, RV frame capacity and vehicle-maker limits control. Treat each rating as a ceiling, not a guarantee that your trailer is approved for the load.

Verify the trailer manufacturer’s rear-hitch guidance and the ratings of the hitch, frame, accessory and any connecting equipment before carrying or towing anything.

Match the mount before matching the receiver

A 2-inch receiver opening alone does not establish that a hitch fits your trailer. TOPTOW TTRV801 and MaxxHaul 50173 are bumper adapters for 4-inch square bumpers, while Nilight 92116B is listed for beams from 4 to 4.5 inches. Fioracl claims adjustable fit across different beam widths and heights, but you still need to confirm its clamp can secure your specific bumper.

Frame-mounted options solve a different fit problem: Stromberg Carlson CC-300 is attached to the frame, and CURT 13703 requires a compatible RV frame with a maximum 72-inch span in its title. Measure the mounting location and consult trailer documentation; do not select a bumper adapter just because its receiver accepts your bike rack.

A secure receiver fit and a suitable structural mounting point are separate requirements.

How to Choose a Travel-Trailer Rear Hitch

Mounting location and fit

Choose a hitch whose mounting method matches a verified structural point on your trailer. Stromberg Carlson CC-300 is designed to bolt or weld to a frame; KUAFU GO-1241 also describes Class I bolted and Class II welded frame mounting. By contrast, TOPTOW TTRV801 and MaxxHaul 50173 fit 4-inch square bumpers, while Nilight 92116B fits 4-to-4.5-inch beams.

Fioracl describes an adjustable bumper fit, but that does not remove the need to check the actual beam dimensions and attachment. Frame-mounted products suit buyers whose trailer frame supports that installation; bumper adapters suit buyers with a compatible bumper and an accessory-only use.

Confirm fit with the trailer maker before installation.

Load limits and intended use

Look for both the load rating and the hitch’s stated purpose, then follow the lowest applicable limit. CURT 13703 lists 3,500 pounds gross trailer weight and 350 pounds tongue weight, subject to frame and component limits. ALMULOO lists the same figures, while KUAFU GO-1241 gives tongue ratings of 200 pounds bolted or 300–350 pounds welded.

Bumper options vary: TOPTOW lists 350 pounds tongue capacity, while MaxxHaul and Nilight list 200 pounds. These numbers do not make every model suitable for towing; TOPTOW and MaxxHaul warn against RV-level trailer towing.

Buyers carrying accessories should verify allowable accessory load, while anyone towing must confirm express approval for that use.

Receiver and accessory compatibility

Check that the receiver opening matches the shank and that the hitch permits your particular accessory. Several products provide a standard 2-by-2-inch opening, including Stromberg Carlson CC-300, TOPTOW TTRV801 and MaxxHaul TOPTOW and MaxxHaul describe compatibility with 2-inch-shank accessories; Nilight similarly lists bike racks and cargo carriers.

ALMULOO excludes vertical-hanging bike racks, so buyers with that rack style should rule it out. A matching receiver size does not prove that the accessory’s weight or leverage is acceptable on the trailer.

If you need a cargo carrier or bike rack, favor products that explicitly describe that use and check both the accessory and hitch limits. Confirm whether a hitch pin or lock is required; TOPTOW notes its pin is not included.

Which Rear Hitch Should You Choose?

For a frame-mounted receiver on a travel trailer, choose Stromberg Carlson CC-300: it is specifically intended for travel trailers and offers bolted or welded frame installation. If you need a stated gross-trailer rating and a compatible RV frame, CURT 13703 lists 3,500 pounds and a 350-pound tongue rating, subject to the frame and component limits. Choose KUAFU GO-1241 if its Class I or Class II installation suits your mounting plan.

For a verified 4-inch square bumper and accessory-only use, TOPTOW TTRV801 offers a 350-pound tongue rating; MaxxHaul 50173 is another 4-inch fit with a 200-pound limit. For beams from 4 to 4.5 inches, consider Nilight 92116B.

Check trailer guidance and accessory limits before fitting any option.

Frequently Asked Questions

How can I tell whether my travel trailer bumper can support a hitch-mounted accessory?

Check the trailer manufacturer’s guidance and the bumper’s construction before attaching anything. Confirm that the receiver is intended for your bumper’s size and that the bumper and its mounting points can handle the accessory and its load. If capacity is unclear, ask the trailer manufacturer or a qualified installer rather than assuming the bumper is adequate.

Do I need a frame-mounted receiver or a bumper-mounted receiver for my intended accessory?

Choose based on the trailer’s approved mounting points and the accessory’s requirements. The Stromberg Carlson CC-300 is described for frame installation and intended for bike racks and cargo carriers; bumper receivers require a suitable bumper fit. Confirm the trailer guidance and compare the load with the limits of the receiver, frame or bumper, and accessory.

What should I check before towing another trailer from a travel trailer’s rear hitch?

Verify that the receiver and trailer are approved for towing another trailer, and check the stated gross-trailer and tongue limits along with the limits of the frame and every connecting component. Do not infer towing suitability from a receiver’s accessory use or fit. Follow the trailer manufacturer’s guidance and applicable towing requirements.

How do I confirm a bumper receiver will fit my trailer?

Measure the bumper or beam where the receiver would attach, then compare that measurement with the product’s stated fit. The listed options include receivers for 4-inch square bumpers and beams from 4 to 4.5 inches. Also check the receiver’s installation requirements and confirm the trailer manufacturer permits that mounting approach.

Can I use the same rear receiver for a bike rack and for towing?

Not necessarily. Some listed receivers are intended for accessories such as bike racks and cargo carriers, while towing requires suitable stated ratings and approval for that use. Check the product’s intended application and all component limits before changing uses; an accessory rating or bumper fit alone does not establish towing capacity.

Final Words

For a frame-mounted receiver intended for travel trailers, the Stromberg Carlson CC-300 is the leading choice, provided the frame accepts installation and all load limits are respected. If a stated gross-trailer rating matters, consider the CURT 13703 only with a compatible RV frame. For bumper mounting, verify the beam size and approved use first; compare limits across the receiver, trailer structure, and accessory before carrying or towing anything.

Leave a Reply

Your email address will not be published. Required fields are marked *