A strong quad nerf bar choice delivers model-specific mounting, a secure foot area and useful protection for riders whose ATV matches the listed fitment. These 10 options cover Suzuki, Yamaha and Honda models, with differences in heel guards, webbing, construction and included installation parts. Several Alba Racing Propeg sets specify year ranges and integrated heel guards, while other listings emphasize aluminum tubing, nets or complete mounting hardware.
Fitment should lead your decision: similar-looking bars are not automatically interchangeable between quads. The ranking favors clearly stated compatibility, then practical details such as tubing size and whether the pair includes nets and mounts.
Check the exact model and year against the seller’s fitment information before ordering, especially when a listing names a model but leaves its year range unstated.
The Alba Racing Suzuki LTZ 400 Propeg is the strongest overall choice here because it names the Suzuki LTZ400 QUADSPORT Z and specifies compatibility with models from 2003–It is sold as a left-and-right pair, includes an integrated heel guard, uses 1-3/8-inch aluminum tubing and comes with chrome-plated mounts and hardware. Confirm your quad’s exact year and fitment before buying; the listing’s stated range is the deciding detail.
Our Top Picks
Best OverallAlba Racing Suzuki LTZ 400 Propeg
Its stated 2003–2008 LTZ400 fitment, integrated heel guard, 1-3/8-inch aluminum tubing and included mounting hardware make it a well-specified choice.
View on Amazon
Best Heel GuardAlba Racing Suzuki LTR 450 Propeg
This set specifies Suzuki LTR450 compatibility for 2006–2009, integrated heel guards, 1-3/8-inch aluminum tubing and bolt-on installation.
View on Amazon
Honda Fitment PickAlba Racing Honda TRX 450R Propeg
The listing identifies Honda TRX450R fitment for 2004–2009 and includes integrated heel guards, 1-3/8-inch aluminum tubing and mounting hardware.
View on Amazon- Wider Netting MotoSport Suzuki LTR450 Nerfbars
Compare fitment, construction and included features
| # | Product | Weight | Material | Compatible with Vehicle Type | Buy |
|---|---|---|---|---|---|
| 1 | 1. Alba Racing Suzuki LTZ 400 PropegBest Overall | 18 lb | Aluminum | ATV | View on Amazon |
| 2 | 2. Alba Racing Suzuki LTR 450 PropegBest Heel Guard | 18 lb | Aluminum | ATV | View on Amazon |
| 3 | 3. Alba Racing Honda TRX 450R PropegHonda Fitment Pick | 18 lb | Aluminum,Steel | ATV | View on Amazon |
| 4 | 4. MotoSport Suzuki LTR450 NerfbarsWider Netting | 12.1 lb | Aluminum | ATV | View on Amazon |
| 5 | 5. Alba Racing Yamaha Raptor StandardRaptor 125 and 250 owners | 9 lb | Aluminum | ATV | View on Amazon |
| 6 | 6. Tusk Comp Series Suzuki Z400Z400 riders wanting heel protection | 9.48 lb | — | — | View on Amazon |
| 7 | 7. ALMULOO Yamaha Raptor 660 Nerf BarRaptor 660 owners seeking impact coverage | 8.8 lb | Aluminum, Plastic | Compatible with 2001-2005 Yamaha Raptor 660… | View on Amazon |
| 8 | 8. Tusk Comp Series Yamaha BlasterBlaster 200 riders wanting steel bars | 9 lb | Alloy Steel | ATV | View on Amazon |
| 9 | 9. Tusk Comp Series Blaster 200Blaster 200 riders seeking rigidity | 10.4 lb | — | ATV | View on Amazon |
| 10 | 10. Tusk Comp Series Silver Nerf BarsRiders prioritizing welded alloy bars | 9.6 lb | Silver | Motorcycle | View on Amazon |
Detailed Reviews: Best Nerf Bars For Quad

#1 · Best Overall
1. Alba Racing Suzuki LTZ 400 Propeg
- Weight: 18 lb
- Material: Aluminum
- Compatible with Vehicle Type: ATV
Best for: LTZ400 riders wanting heel guards.
Why it ranks #1: Its stated 2003–2008 LTZ400 fitment, integrated heel guard, 1-3/8-inch aluminum tubing and included mounting hardware make it a well-specified choice.
An integrated heel guard distinguishes Alba Racing’s Propeg pair for Suzuki LTZ400 QuadSport Z models from 2003 through 2008. The set combines 1-3/8-inch aluminum tubing with black bars and red nets, giving riders a contained foot area and additional heel protection for the specified ATV fitment.
The right-and-left pair uses 1-3/8-inch aluminum tubing, while the included mounts and hardware support installation on the listed LTZ400 application. Polished and anodized aluminum provides a finished surface, and the integrated heel guard adds support and protection at the rear of the foot platform. The fitment is specifically stated for 2003–2008 Suzuki LTZ400 QuadSport Z models, so model year matters when selecting this set.
- Fits Suzuki LTZ400 QuadSport Z models from 2003–2008
- Integrated heel guard
- 1-3/8-inch aluminum tubing
- Pair includes chrome-plated mounts and installation hardware
- The stated fitment covers only 2003–2008 Suzuki LTZ400 QuadSport Z models.
Skip it if you ride a Honda TRX450R from 2004–2009; Alba Racing’s Propeg set is listed for that model range.
Owners of a 2003–2008 Suzuki LTZ400 QuadSport Z who want an integrated heel guard and paired bars are the intended buyers. The specified year range is the key fit boundary.
Full product details
| Brand | Alba Racing |
|---|---|
| Color | Red |
| Compatible with Vehicle Type | ATV |
| Item Weight | 18 pounds |
| Manufacturer | Alba Racing |
| Part Number | SUZ-206-T7-B-R |
| Material | Aluminum |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: Suzuki LTZ 400 QUADSPORT Z (2003-2008) Propeg Nerf Bars Black Bars w/Red Net
View on Amazon
#2 · Best Heel Guard
2. Alba Racing Suzuki LTR 450 Propeg
- Weight: 18 lb
- Material: Aluminum
- Compatible with Vehicle Type: ATV
Best for: LTR450 owners wanting heel protection.
Why it ranks #2: This set specifies Suzuki LTR450 compatibility for 2006–2009, integrated heel guards, 1-3/8-inch aluminum tubing and bolt-on installation.
Alba Racing’s integrated heel guard is the key foot-protection feature in this Propeg pair for Suzuki LTR450 QuadRacer models from 2006 through 2009. The set combines 1-3/8-inch aluminum tubing with black bars and blue nets, and includes the listed mounting hardware for installation.
The right-and-left bars use 1-3/8-inch aluminum tubing, and the integrated heel guard adds support and protection behind the foot platform. The listed bolt-on installation type and included hardware support fitting the pair to the specified Suzuki application. Polished and anodized finishing is described for the aluminum, while the blue nets provide a contrasting webbed surface. Fitment is stated for LTR450 QuadRacer models from 2006–2009, making model year an essential selection detail.
- Fits Suzuki LTR450 QuadRacer models from 2006–2009
- Integrated heel guard
- 1-3/8-inch aluminum tubing
- Bolt-on pair includes installation hardware
- The stated fitment is limited to Suzuki LTR450 QuadRacer models from 2006–2009.
Skip it if you ride a Suzuki LTR450 and prioritize 1-1/2-inch nets and a stated 50-inch maximum width; MotoSport’s set lists both features.
Suzuki LTR450 QuadRacer owners from 2006–2009 who want a heel guard and bolt-on pair are the intended buyers. The listed fitment does not cover other LTR450 years.
Full product details
| Brand | Alba Racing |
|---|---|
| Color | Blue |
| Compatible with Vehicle Type | ATV |
| Installation Type | Bolt-On |
| Item Weight | 18 pounds |
| Manufacturer | Alba Racing |
| Part Number | SUZ-195-T7-B-L |
| Material | Aluminum |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: Suzuki LTR 450 QUADRACER (2006-2009) Propeg Nerf Bars Black Bars w/Blue Net
View on Amazon
#3 · Honda Fitment Pick
3. Alba Racing Honda TRX 450R Propeg
- Weight: 18 lb
- Material: Aluminum,Steel
- Compatible with Vehicle Type: ATV
Best for: TRX450R riders wanting heel guards.
Why it ranks #3: The listing identifies Honda TRX450R fitment for 2004–2009 and includes integrated heel guards, 1-3/8-inch aluminum tubing and mounting hardware.
An integrated heel guard gives Alba Racing’s Propeg pair a defined foot-protection feature for Honda TRX450R models from 2004 through 2009. The set uses 1-3/8-inch aluminum tubing and includes black bars with black nets, plus chrome-plated mounts and hardware for the specified application.
The right-and-left pair is made with 1-3/8-inch aluminum tubing, and its integrated heel guard adds support and protection at the back of the foot area. Polished and anodized finishing is listed for the aluminum, while chrome-plated mounts and hardware are included for installation. The stated fitment is Honda TRX450R for 2004–2009. Buyers outside that model range need another application rather than assuming this Propeg set fits other Honda ATVs.
- Fits Honda TRX450R models from 2004–2009
- Integrated heel guard
- 1-3/8-inch aluminum tubing
- Chrome-plated mounts and installation hardware included
- The stated fitment is limited to Honda TRX450R models from 2004–2009.
Skip it if you ride a Suzuki LTZ400 QuadSport Z from 2003–2008; Alba Racing’s other Propeg set lists that application.
Honda TRX450R owners from the stated 2004–2009 range who want an integrated heel guard are the right buyers. Its specific model-year fitment is the main boundary to consider.
Full product details
| Brand | Alba Racing |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | ATV |
| Item Weight | 18 pounds |
| Manufacturer | Alba Racing |
| Part Number | HON-218-T7-B-B |
| Material | Aluminum,Steel |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: TRX 450R (2004-2009) Propeg Nerf Bars Compatible with Honda Black Bars w/Black Net
View on Amazon
#4 · Wider Netting
4. MotoSport Suzuki LTR450 Nerfbars
- Weight: 12.1 lb
- Material: Aluminum
- Compatible with Vehicle Type: ATV
Best for: LTR450 riders seeking wide nets.
Why it ranks #4: For Suzuki LTR450 models, this pair includes 1-1/2-inch netting, mounting hardware and instructions, and specifies a maximum width of 50 inches.
The 1-1/2-inch netting is the defining feature of these MotoSport nerfbars for the Suzuki LTR450 Quad Racer, with wider coverage than the one-inch nets cited in the listing. The pair also sweeps upward from front to rear for maximum ground clearance, while retaining use of OEM heel plates and fender extensions.
A maximum width of 50 inches is stated to comply with ATVA rules, and the upward front-to-rear sweep supports ground clearance. The wider netting offers a broader foot-resting surface, while compatibility with OEM heel plates and fender extensions lets owners retain those components. The package includes both bars, netting, mounting hardware, and installation instructions. Fitment is listed for the LTR450 from 2006–2009 in the features, with another description stating 2006–2011, so the year range warrants attention.
- 1-1/2-inch netting
- Front-to-rear upward sweep for maximum ground clearance
- Maximum width of 50 inches to comply with ATVA rules
- Allows use of OEM heel plates and fender extensions
- The listing gives conflicting fitment ranges: 2006–2009 and 2006–2011.
Skip it if you ride a Suzuki LTR450 from 2006–2009 and prefer an integrated heel guard; Alba Racing’s Propeg pair lists one.
LTR450 owners who value wider nets, ground clearance, and continued use of OEM heel plates or fender extensions are the target. Check the stated year-range discrepancy before choosing this set.
Full product details
| Brand | MotoSport |
|---|---|
| Color | Silver/Blue |
| Compatible with Vehicle Type | ATV |
| Installation Type | Bolt-On |
| Item Weight | 12.1 pounds |
| Manufacturer | Bay Area Powersports |
| Part Number | 81-2201 |
| Material | Aluminum |
| Model Number | 81-2201 |
Listed on Amazon as: Suzuki LTR450 LTR 450 Quadracer Nerfbars Silver Bars/Blue Nets
View on Amazon
#5
5. Alba Racing Yamaha Raptor Standard
- Weight: 9 lb
- Material: Aluminum
- Compatible with Vehicle Type: ATV
Best for: Raptor 125 and 250 owners.
Why it ranks #5: It specifies compatibility with all years and models of Yamaha Raptor 125 and 250, with 1-3/8-inch aluminum tubing and installation hardware.
Compatibility with all years and models of the Yamaha Raptor 125 and 250 is the defining advantage of these Alba Racing standard nerf bars. The left-and-right pair adds a foot-bar setup with black nets, while included chrome-plated mounts and hardware support installation on the specified Raptor models.
The 1-3/8-inch aluminum tubing provides the bar structure, and the polished, anodized finish gives the surface a lasting finish. Because the pair includes both sides and installation hardware, buyers receive the main components for mounting without sourcing those listed pieces separately. The bars are explicitly for Raptor 125 and 250 models across all years; fitment-specific brackets mean the vehicle application remains important when choosing the set.
- Listed for all years and models of Yamaha Raptor 125 and 250
- Pair includes right and left nerf bars
- 1-3/8-inch aluminum tubing
- Chrome-plated mounts and installation hardware included
- This standard set does not list an integrated heel guard.
Skip it if you ride a Suzuki LTZ400 from 2003–2008 and want an integrated heel guard; Alba Racing’s Propeg set lists both.
Raptor 125 and 250 owners looking for a standard aluminum pair with mounting hardware are the match. The listing specifies those Yamaha models, and does not describe the integrated heel guard found on Alba’s Propeg design.
Full product details
| Brand | Alba Racing |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | ATV |
| Item Weight | 9 pounds |
| Manufacturer | Alba Racing |
| Part Number | YMH-192-T1-B-B |
| Material | Aluminum |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: Raptor 125, YFM 125 Raptor 250 YFM 250 Standard Nerf Bars Black w/Black Net Compatible with All Years Yamaha Raptor 250 and 125
View on AmazonWhy it ranks #6: Designed for the Suzuki Z400 QuadSport, this aluminum assembly combines side rails, heel guards and black foot-containment webbing.
Integrated heel guards paired with black foot-containment webbing give the Tusk Comp Series a more enclosed foot platform for compatible Suzuki Z400 QuadSport riders. Its complete assembly replaces or upgrades the factory foot-peg area, combining side rails and a contained place for your feet during off-road riding.
Lightweight aluminum tubing keeps the assembly suited to sport ATV applications, while the side rails add protection around the rider’s foot. Built-in heel guards provide additional foot support and protection, and the black webbing helps keep feet positioned on the platform. Together, these features address both foot placement and side exposure in one replacement assembly. The listed compatibility is for the Suzuki Z400 QuadSport, so the model-specific fit is central to choosing this set.
- Complete assembly replaces or upgrades the factory foot-peg area
- Side rails add protection around the rider’s foot
- Integrated heel guards provide additional foot support and protection
- Black webbing helps keep feet positioned
- Listed compatibility is limited to the Suzuki Z400 QuadSport.
Skip it if you ride a Yamaha Raptor 250 or 125; Alba Racing’s standard set is listed for those models.
Z400 QuadSport owners seeking side rails, heel guards, and foot-containment webbing in one assembly are the intended buyers. Its listed fit is model-specific, so riders of other ATVs need a different application.
Full product details
| Brand | TUSK |
|---|---|
| Item Weight | 9.48 pounds |
| Manufacturer | Tusk Racing |
| Part Number | 19-22443048-a84c04 |
| Dimensions | 23 x 20 x 4 inches |
Listed on Amazon as: Tusk Comp Series Nerf Bars – Blue Compatible with Suzuki Z400 QuadSport
View on Amazon
#7
7. ALMULOO Yamaha Raptor 660 Nerf Bar
- Weight: 8.8 lb
- Material: Aluminum, Plastic
- Compatible with Vehicle Type: Compatible with 2001-2005 Yamaha Raptor 660…
Best for: Raptor 660 owners seeking impact coverage.
Why it ranks #7: Its stated 2001–2005 Raptor 660 and 660R fitment comes with left and right bars, blue nets and mounting hardware.
Compatibility with 2001–2005 Yamaha Raptor 660 and 660R models anchors this ALMULOO nerf bar set to a defined quad fitment. Its listed rollover and tip-over role is to contact the ground first, helping shield foot pegs, frame, and engine case from direct impact; blue webbing and mounting hardware are included.
The stated ground-contact protection targets the foot pegs, frame, and engine case during a rollover, tip-over, or accidental fall. A left-and-right set with blue webbing nets and mounting hardware is included, giving buyers the main listed components for installation. The product combines aluminum and plastic and is described as powder-coated black and blue. Its fitment is specific to 2001–2005 Raptor 660 and 660R models, not a general Raptor listing.
- Fits 2001–2005 Yamaha Raptor 660 and Raptor 660R
- Ground-contact protection targets foot pegs, frame, and engine case
- Left and right bars included
- Blue webbing nets and mounting hardware included
- The stated fitment is limited to 2001–2005 Raptor 660 and 660R models.
Skip it if you ride a Yamaha Blaster 200; Tusk’s Comp Series set is listed for that model instead.
Owners of a 2001–2005 Yamaha Raptor 660 or 660R seeking the listed ground-contact coverage are the right audience. The model and year range are specific, so other Raptor versions fall outside the stated fitment.
Full product details
| Brand | ALMULOO |
|---|---|
| Color | Black+Blue |
| Compatible with Vehicle Type | Compatible with 2001-2005 Yamaha Raptor 660, Compatible with 2001-2005 Yamaha Raptor 660R |
| Included Components | left and right nerf bars, blue webbing nets, and all necessary mounting hardware (as shown in the picture) |
| Item Dimensions | 27.76 x 15.94 x 5.31 inches |
| Item Weight | 8.8 pounds |
| Dimensions | 27.76 x 15.94 x 5.31 inches |
| Manufacturer | Ainuosen |
| Part Number | AI-3029 |
| Material | Aluminum, Plastic |
| Model Number | AI-3029 |
Listed on Amazon as: ATV Nerf Bar Compatible with 2001-2005 Raptor
View on Amazon
#8
8. Tusk Comp Series Yamaha Blaster
- Weight: 9 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: ATV
Best for: Blaster 200 riders wanting steel bars.
Why it ranks #8: This Yamaha Blaster 200-specific listing has black webbing and a powder-coated finish; its specifications list alloy steel construction.
Heavy-duty steel construction sets these Tusk Comp Series nerf bars apart for the Yamaha Blaster 200, pairing a strong off-road protection structure with black foot webbing. The listing also describes 1-3/8-inch alloy tubes with heli-arc-welded joints, so buyers should note that its material details are not fully consistent.
Black webbing is described as providing extra traction and safety for rider feet, while enhanced footpeg support targets protection for legs and feet during trail and motocross riding. The listing calls the bars durable steel with a corrosion-resistant powder-coated finish, but also specifies 1-3/8-inch alloy tubes and heli-arc-welded joints. That mismatch makes the exact material unclear. The product is identified as compatible with the Yamaha Blaster 200, giving buyers a specific application to check.
- Compatible with Yamaha Blaster 200
- Black webbing provides extra foot traction and safety
- Powder-coated finish resists corrosion and wear
- 1-3/8-inch tubes with heli-arc-welded joints are listed
- The listing conflicts between steel construction and 1-3/8-inch alloy tubing.
Skip it if you ride a Suzuki Z400 QuadSport and want a stated aluminum construction; Tusk’s Z400-compatible Comp Series listing specifies lightweight aluminum tubing.
Yamaha Blaster 200 riders seeking black webbing and listed footpeg support are the intended buyers. The material descriptions conflict, so anyone choosing specifically by steel or alloy construction should account for that uncertainty.
Full product details
| Brand | TUSK |
|---|---|
| Color | black |
| Compatible with Vehicle Type | ATV |
| Item Dimensions | 23 x 17 x 5 inches |
| Item Weight | 9 pounds |
| Dimensions | 23 x 17 x 5 inches |
| Manufacturer | Tusk |
| Part Number | nerf1030690039 |
| Material | Alloy Steel |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: Tusk Comp Series Nerf Bars – Black Compatible with Yamaha Blaster 200
View on Amazon
#9
9. Tusk Comp Series Blaster 200
- Weight: 10.4 lb
- Compatible with Vehicle Type: ATV
Best for: Blaster 200 riders seeking rigidity.
Why it ranks #9: The listing specifies Yamaha Blaster 200 fitment for 1988–2006 and describes 1-3/8-inch alloy tubes with welded joints.
Tusk says these Comp Series nerf bars are beefier than most standard bars for higher strength and rigidity, making that construction their defining feature for Yamaha Blaster 200 owners. The set uses 1-3/8-inch alloy tubes with heli-arc-welded joints and includes black webbing for a coordinated foot platform.
The thicker-than-standard construction is presented as a way to increase strength and rigidity, while heli-arc-welded joints connect the 1-3/8-inch alloy tubes. Brushed finishing gives the tubes a high luster, and laser-etched logos appear on both bars. The title lists Yamaha Blaster 200 models from 1988–2006, while the description points readers to a fitment-guide image for additional machines. That stated year range should guide model selection.
- Described as beefier than most standard nerf bars
- 1-3/8-inch alloy tubes
- Heli-arc-welded joints
- Laser-etched logos on both bars
- The stated Yamaha Blaster 200 fitment range is 1988–2006.
Skip it if you ride a Raptor 660 from 2001–2005; ALMULOO’s set lists that model range and includes webbing nets.
Yamaha Blaster 200 owners within the stated 1988–2006 range who prioritize the listed rigidity and welded alloy construction are the intended buyers. Other machines require checking the referenced fitment guide.
Full product details
| Brand | TUSK |
|---|---|
| Color | Black With Black Webbing |
| Compatible with Vehicle Type | ATV |
| Item Dimensions | 22.75 x 17.75 x 5 inches |
| Item Weight | 10.4 pounds |
| Dimensions | 22.75 x 17.75 x 5 inches |
| Manufacturer | Tusk Off-Road |
| Part Number | 19-2249c169-429129 |
Listed on Amazon as: TUSK Comp Series Nerf Bars Black with Black Webbing for Yamaha Blaster 200 1988-2006
View on Amazon
#10
10. Tusk Comp Series Silver Nerf Bars
- Weight: 9.6 lb
- Material: Silver
- Compatible with Vehicle Type: Motorcycle
Best for: Riders prioritizing welded alloy bars.
Why it ranks #10: This silver Tusk set lists 1-3/8-inch alloy tubes, heli-arc-welded joints and black webbing, but provides no specific quad fitment.
Heli-arc-welded joints on 1-3/8-inch alloy tubes define this silver Tusk Comp Series set, connecting its bar construction to a rigid assembly. Brushed to a high luster and paired with black webbing, it gives riders a finished-looking foot platform; the supplied listing does not specify an ATV model fitment.
The 1-3/8-inch alloy tubing and heli-arc-welded joints provide the listed structural details, while the brushed finish brings the bars to a high luster. Black webbing completes the foot platform and offers a contrasting surface. These features make the construction and appearance clear, but the product information identifies compatible vehicle type broadly as motorcycle rather than naming an ATV model. Buyers should treat that unspecified ATV application as a meaningful fit consideration.
- 1-3/8-inch alloy tubes
- Heli-arc-welded joints
- Brushed to a high-luster finish
- Black webbing included
- The supplied listing does not name a compatible ATV model.
Skip it if you need a stated fit for a specific quad; Tusk’s Comp Series set for the Yamaha Blaster 200 names that model.
Riders whose machine is confirmed to accept this set and who value welded alloy construction, a brushed finish, and black webbing may find it relevant. The listing leaves ATV-specific fit unstated.
Full product details
| Brand | TUSK |
|---|---|
| Color | Silver With Black Webbing |
| Compatible with Vehicle Type | Motorcycle |
| Item Dimensions | 22 x 17 x 5 inches |
| Item Weight | 9.6 pounds |
| Dimensions | 22 x 17 x 5 inches |
| Manufacturer | Tusk Racing |
| Part Number | 19-2214c11c-3f3f5b |
| Material | Silver |
Listed on Amazon as: Tusk Comp Series Nerf Bars Silver with Black Webbing
View on AmazonWhy exact quad fitment matters
The model and year range matter more than a shared brand or similar-looking frame. These listings show how narrow fitment can be: one Alba Racing set names Suzuki LTZ400 QUADSPORT Z models from 2003–2008, another specifies Honda TRX450R models from 2004–2009, and the Raptor 125/250 set claims compatibility across all years and models. The Tusk Suzuki Z400 listing names the QuadSport but gives no year range in the supplied details, so verify the exact machine before ordering.
A mismatch can leave mounting points misaligned or prevent the bars from sitting correctly around the foot area; the product details do not establish interchangeability across models. Also check the listing’s fitment guide where one is referenced.
Do not assume that an ATV with a similar engine size or family name uses the same brackets. Confirm model, year and any stated sub-model against the seller’s compatibility information.
Check what the listed kit actually includes
A complete-looking bar set does not guarantee that every installation or foot-control component is included. Several Alba Racing listings explicitly include chrome-plated mounts and hardware, and describe a left-and-right pair; the MotoSport Suzuki LTR450 set lists nets, mounting hardware and installation instructions. The ALMULOO Raptor listing likewise names both bars, blue nets and mounting hardware.
By contrast, not every product description in this set provides the same level of detail about included parts, so confirm the package contents before purchase. There is also a practical trade-off between integrated features and retaining stock parts: the MotoSport listing says its design allows use of OEM heel plates and fender extensions, while Alba Propeg products describe integrated heel guards.
These are distinct approaches, not proof that one design suits every ATV. Check whether your current heel plates or extensions matter to your setup, then verify what the specific fitment kit accommodates.
How to Choose Quad Nerf Bars
Model and year fitment
Look first for a listing that names your exact quad model and year, rather than relying on a general ATV description. The Alba Racing Suzuki LTZ400 set specifies 2003–2008, its Honda TRX450R set specifies 2004–2009, and its Suzuki LTR450 set covers 2006–The Yamaha Raptor 125/250 listing instead says all years and models.
The Tusk Suzuki Z400 listing names the QuadSport but does not supply a year range in the provided details. Riders with an exact match can prioritize those stated ranges; if your year is unclear or absent, confirm compatibility with the seller before choosing, even when the model family sounds right.
Foot protection and webbing
Choose the foot-area design around the protection and support features you want, and check what the particular listing actually specifies. Alba Racing’s Propeg sets include integrated heel guards, while the Tusk Suzuki Z400 set describes heel guards and black foot-containment webbing. The ALMULOO Raptor 660 set lists blue nets, and MotoSport’s LTR450 set specifies 1-1/2-inch netting.
The listed Alba Propeg and Tusk details therefore suit buyers seeking a named heel-guard feature; riders prioritizing a stated net width can compare the MotoSport listing. Webbing colors vary, but appearance alone does not establish fitment or protection.
Verify the kit’s included nets and how they attach before treating them as a substitute for other foot-control parts.
Construction and installation details
Compare stated tubing and included mounting parts, rather than assuming every aluminum or alloy listing has the same build. Alba Racing Propeg sets use 1-3/8-inch aluminum tubing and list chrome-plated mounts and hardware; its standard Raptor set also specifies 1-3/8-inch aluminum tubing. The Tusk Comp Series silver listing describes 1-3/8-inch alloy tubes with heli-arc-welded joints, and MotoSport specifies bolt-on installation and includes mounting hardware.
Riders who want a described tube size and hardware can favor those explicit listings. The Tusk Blaster entry lists alloy steel in its specifications, while other details describe alloy tubes, so check the exact product information if material is decisive.
Included hardware does not remove the need to verify model fitment.
Which Quad Nerf Bars Should You Choose?
Choose the Alba Racing Suzuki LTZ 400 Propeg if your quad is a 2003–2008 LTZ400 QUADSPORT Z and you want stated heel guards, 1-3/8-inch tubing and included hardware. For a Suzuki LTR450 from 2006–2009, the Alba Racing Suzuki LTR 450 Propeg offers the same named tubing size and integrated heel guards; the MotoSport Suzuki LTR450 Nerfbars instead specify 1-1/2-inch nets and a 50-inch maximum width. Honda TRX450R owners should consider the Alba Racing Honda TRX 450R Propeg for its stated fitment range.
Yamaha Raptor 125 or 250 riders can look at the Alba Racing Yamaha Raptor Standard, while Raptor 660/660R owners should check the ALMULOO Yamaha Raptor 660 Nerf Bar. For an unspecified year Z400, confirm fitment before selecting the Tusk Comp Series Suzuki Z400.
Related Buying Guides
Frequently Asked Questions
How can I confirm nerf bars will clear my quad’s tires, fenders and footpegs?
Confirm the exact make, model and year against the product’s stated fitment, then check the listing or seller for clearance details specific to your quad. Do not assume a broad fitment label guarantees clearance. If tire, fender or footpeg dimensions have changed, verify those changes before buying.
Do nerf bar nets need periodic adjustment or replacement?
Yes, inspect nets periodically and adjust or replace them if they become loose, damaged or no longer sit securely. Follow the product’s installation and care instructions, and check that fasteners remain secure. The supplied titles do not specify net-adjustment intervals or replacement parts, so confirm those details for the product you choose.
Will installing nerf bars require changes to my stock heel plates or fender extensions?
It depends on the quad and the nerf bar design; the supplied product titles do not establish whether stock heel plates or fender extensions need modification. Confirm the installation requirements for your exact model and year before buying. The LTZ400 Propeg listing specifically names an integrated heel guard, but that does not settle other fitment questions.
How important is the listed year range when choosing a set?
Treat the stated year range as a key fitment check, not a suggestion. The Alba Racing Suzuki LTZ 400 Propeg names the LTZ400 QUADSPORT Z and lists 2003–2008; the Suzuki LTR 450 Propeg lists 2006–For products with no stated year range, verify compatibility for your quad’s exact year before buying.
What should I check about the included hardware before installation?
Check the product listing to see what hardware is included and whether it matches the stated fitment. The LTZ400 Propeg listing specifies chrome-plated mounts and hardware, while the other supplied titles do not establish their hardware contents. Confirm any installation requirements with the seller or product documentation before beginning work.
Final Words
For a 2003–2008 Suzuki LTZ400 QUADSPORT Z, the Alba Racing LTZ 400 Propeg is the clearest overall pick because its stated fitment, integrated heel guard, tubing size and included hardware are specified. LTR450 and TRX450R owners should favor the matching Alba listings and check their listed years. For other options, especially listings with unclear fitment, confirm the exact quad year and clearance before ordering.



