Best Motorcycle Tail Light With Turn Signals for Different Bikes

#1 · Best Overall

1. Nilight TL-404

• Voltage: 12 V DC
• Lens Material: Plastic
• Compatible with Vehicle Type: Motorcycle

Best for: Smoked Harley LED Upgrade.

Why it ranks #1: Combines running, brake, turn, and license plate lights with 60 LED chips, 12-volt DC operation, a gasket, and a stated two-year warranty.

Sixty high-intensity LED chips and a smoked housing give this Nilight tail light a dark appearance while combining running, brake, turn-signal, and license-plate lighting. Its 12V direct-current specification and included gasket provide practical installation details for Harley owners considering a multi-function replacement.

The 60 LED chips handle the listed running, brake, and left/right signal functions, while an extra license-plate light adds plate illumination within the same assembly. Nilight specifies 12V DC operation, giving buyers a clear electrical requirement to check before wiring. The included gasket is intended to help prevent water seepage, and the electric board is fully covered with glue, adding two listed moisture-conscious construction details for a rear-mounted lamp.

Skip it if you prefer a clear-lens appearance; Nilight specifies a smoked lens and smoked housing for this assembly.

This Nilight suits Harley owners seeking smoked styling, integrated rear-light functions, and a plate light in one assembly. Its 12V DC requirement and smoked lens are relevant fit and appearance considerations before replacing the existing lamp.

Listed on Amazon as: Nilight Motorcycle Tail Light Brake Turn License Plate for Harley, Smoked

#2 · Best Harley Fit

2. MOVOTOR Harley Tail Light

• Voltage: 12 V
• Lens Material: Plastic
• Compatible with Vehicle Type: Fitment: Tail light compatiable with Harley…

Best for: Harley Fender-Matched Lighting.

Why it ranks #2: Lists fitment across Sportster, Dyna, Touring, and many specified FLST and FXST models, with integrated running, brake, turn, and plate lighting.

The lay-down housing angles along the rear fender, giving compatible Harley models a streamlined tail-light profile while combining running, brake, and left/right turn-signal functions. Its white license-plate light adds another rear-facing task without a separate lamp, making this an integrated option for riders whose bike falls within the listed fitment range.

Running, brake, and turn-signal lighting share one assembly, so the main rear-light functions are consolidated rather than split across separate lamps. The white license-plate light adds illumination for the plate, while the angled lay-down shape follows the rear-fender curve for a less upright appearance. At 12 volts, it is specified for a range of Harley models from 1991–2010, with several model-year exceptions; check those exclusions against your bike before choosing it.

Skip it if you ride a Harley model outside the listed years or exclusions; this light’s stated fitment may not cover your bike.

A Harley owner seeking a fender-following profile and combined rear-light functions should consider this MOVOTOR unit. Its fit depends on the exact model and year, since the listing names several exceptions within the broader Harley fitment range.

Listed on Amazon as: LED Tail Light with Turn Signal Compatible with Harley Davidson

#3 · Best 90-LED Assembly

3. PBYMT 90-LED Tail Light

Best for: Smoke-Lens Bracket Setup.

Why it ranks #3: Pairs a 90-LED smoke assembly with IP67 waterproofing and a license plate bracket, suiting buyers who want an integrated bracket-style unit.

A smoke lens paired with a license-plate bracket gives this PBYMT tail light a dark-toned, plate-carrying setup in one listed assembly. Its title also specifies 90 LEDs, IP67 waterproofing, and running, brake, and turn-signal functions, making it an option for street-bike, cruiser, chopper, or bobber owners seeking those combined features.

The 90-LED specification and combined running, brake, and turn-signal functions put several rear-light roles in one assembly, while the included license-plate bracket provides a mounting feature for the plate. IP67 waterproofing is listed for wet-weather exposure, and the smoke finish suits buyers seeking a darker lens appearance. PBYMT names street bikes, cruisers, choppers, and bobbers as compatible styles, but the supplied specifications do not give a particular mounting pattern or voltage.

Skip it if you need a specified voltage or mounting pattern before buying; the supplied specifications do not provide those details.

This PBYMT suits a rider choosing a smoke-lens tail light with a plate bracket and combined signals for a street bike, cruiser, chopper, or bobber. Make sure its mounting and electrical requirements match your intended installation.

Listed on Amazon as: Enhanced Motorcycle Tail Light, Break light Running Lights, IP67 Waterproof Turn Signals with License Plate Bracket Compatible with Street Bike Cruiser Chopper Bobber (Smoke, 90 LEDs)

#4

4. Benlari 90-LED Tail Light

• Lens Material: Polycarbonate
• Compatible with Vehicle Type: Motorcycle

Best for: Waterproof Smoke-Lens Assembly.

Why it ranks #4: Offers a 90-LED smoke assembly described as waterproof, with a polycarbonate lens and license plate bracket for street bike, cruiser, chopper, or bobber use.

IP67 waterproofing and a smoke lens headline this Benlari assembly, which also lists 90 LEDs, running lights, brake lights, turn signals, and a license-plate bracket. Those combined elements suit motorcycle owners seeking several rear-light functions and plate mounting in one unit, with street bikes, cruisers, choppers, and bobbers named in its title.

The 90-LED listing and combined running, brake, and turn-signal functions bring the principal rear-light roles together, while the included license-plate bracket adds a place for plate mounting. IP67 waterproofing is a useful specification for exposure to wet conditions; the lens material is polycarbonate, and the lens color is smoke. Benlari identifies motorcycles as the compatible vehicle type and names several motorcycle styles in the title, but gives no voltage or mounting dimensions in the supplied specifications.

Skip it if you need a confirmed voltage before planning wiring; Benlari’s supplied specifications identify no voltage for this light.

This Benlari unit fits riders who want a smoke-lens, bracket-equipped assembly with listed waterproofing and multiple rear-light functions. Its listed vehicle type is motorcycle, so verify that its electrical and mounting requirements suit your particular bike.

Listed on Amazon as: Upgraded Motorcycle Tail Light, 90LEDs Brake Lights, IP67 Waterproof Turn Signals Running with License Plate Bracket Fit for Street Bike Cruiser Chopper Bobber (Smoke)

#5 · Best Wiring Detail

5. ANKIA 40-LED Tail Light

• Voltage: 12 V

Best for: Five-Wire Integrated Bracket.

Why it ranks #5: Provides 40 watts from 40 LEDs, a license plate bracket, 12-volt operation, and a five-wire connection guide for four lighting functions.

A metal license-plate bracket and five-wire connection distinguish the ANKIA 40-LED tail light, which combines running, brake, tail, and turn-signal functions. Its 12V, 40W specification and mix of red, amber, and white LEDs give buyers concrete electrical and lighting details, while fitment spans several major motorcycle makes.

The five-wire system assigns separate connections for negative, brake, running, and left/right signals, making the listed wiring roles clear before installation. A metal license-plate bracket is integrated, and the 24 red, 12 amber, and four white LEDs correspond to a multi-color rear-light setup. At 12V and 40W, it suits buyers checking a specific electrical system; the listing says some models may need minor modification, so fit is not universal without adjustment.

Skip it if you want installation with no model-specific modification; ANKIA states that some motorcycles may need a small adjustment.

Choose this ANKIA if you want an integrated plate bracket, multi-color LEDs, and clearly assigned five-wire connections. Its listed fit spans many makes, but some models may need minor modification, so factor that into the installation.

Listed on Amazon as: Anki HappiGo ANKIA 40-LED 40W Motorcycle Tail Light Integrated Running Lamp

#6 · Widest Voltage Range

6. BlyilyB Dual-Color Lamp

Best for: Wide-Voltage Dual-Color Lamp.

Why it ranks #6: Its stated 12–80V range and amber/red dual-color design support running, turn, and brake functions in one lamp; package includes one lamp.

A 12–80V range and amber-and-red dual-color output distinguish this BlyilyB lamp, using amber for turn signals and red for tail and brake lighting. One lamp is listed for driving lights, left/right signals, and brake-stop functions, while its IP67 glue-sealed construction is specified for rainy conditions.

The amber turn-signal and red tail/brake colors separate signal roles within one lamp, reducing the need to source separate units for those listed functions. Its 12–80V specification spans a broad range of electrical systems, and the IP67 glue-seal design is stated to support operation in rainy weather. The wiring guide identifies black as negative and yellow and green as sequential turn-signal wires; use those assignments when planning the connection workflow.

Skip it if you need two lamps from one listing; BlyilyB specifies a pack of one for this dual-color setup.

This suits riders seeking a single dual-color lamp with a wide stated voltage range and rain-rated sealing. It is a one-lamp purchase, and the listed wire assignments should be considered when planning the installation.

Listed on Amazon as: 12-80V Dual Color Motorcycle Scooter Amber Color For Turn Signals and Red Color For Tail Light Brake Stop Light Lamp (Pack of 1)

#7

7. DREAMIZER Fender Tail Light

• Voltage: 12 V
• Lens Material: Polycarbonate
• Compatible with Vehicle Type: Motorcycle

Best for: Off-Road Fender Replacement.

Why it ranks #7: Targets off-road and dirt bikes with a 12-volt, waterproof ABS and polycarbonate assembly described as having a stabilization circuit and three-in-one function.

A rear-fender format and 12-to-15-volt operating range make this DREAMIZER lamp a focused choice for off-road motorcycles, motocross bikes, and dirt bikes. Its three-in-one lighting functions combine tail, brake, and turn signals, while a stabilization circuit is specified to suppress sudden overvoltages during operation.

The ABS housing and polycarbonate lens provide the listed construction, while waterproofing supports use where moisture is a concern. Its stabilization circuit is specified to suppress sudden overvoltages, and the 12-to-15-volt operating range gives the buyer a concrete electrical requirement to check. The three-in-one tail, brake, and turn-signal design consolidates rear lighting on an off-road motorcycle, and low power consumption is listed as a way to avoid reducing engine power.

Skip it if you need a lamp specified for operation above 15 volts; this DREAMIZER model lists a 12-to-15-volt range.

Off-road and dirt-bike owners seeking a waterproof rear-fender lamp with integrated signals will find the listed features relevant. Check that the bike’s electrical system falls within the stated 12-to-15-volt operating range before installation.

Listed on Amazon as: Rear Fender Black 12V LED Tail Light Brake Lamp Turn Signals For Off-road Motorcycle Motocross Dirt Bike(Black#3

#8

8. LivTee Flexible LED Strip

• Voltage: 12 V
• Lens Material: Plastic
• Compatible with Vehicle Type: Motorcycle

Best for: Flexible Adhesive Strip Mount.

Why it ranks #8: A flexible 8-inch strip has 32 SMD LEDs, four lighting functions, 12-volt operation, five-wire connection, and adhesive mounting.

An 8-inch flexible strip with 3M tape mounting gives this LivTee light a low-profile alternative to a rigid tail-light housing. Its 32 SMD chips support running, brake, and left/right turn-signal functions at 12V, while an IP65 silicone-filled strip is specified for water resistance.

The flexible FPC strip can follow a mounting surface more readily than a rigid lamp, and 3M tape provides the listed mounting method without a bracket being specified. Its five-wire connection serves the running, brake, and left/right turn functions, while 32 SMD 2835 chips provide the stated light source. At 12V, it suits buyers whose motorcycle electrical system matches that specification; IP65 silicone filling adds a listed measure of water protection.

Skip it if you need a stated IP67 rating for the light; LivTee lists IP65 silicone-filled water protection.

LivTee suits riders who want a flexible, tape-mounted strip with four rear-light functions rather than a rigid housing. Check that the surface accepts the listed adhesive mounting and that the motorcycle uses 12V.

Listed on Amazon as: Universal 8" Flexible LED Light Strip with Tail Brake Stop Turn Signal Lights All-in-one for Motorcycle Scooter Quad Cruiser Off Road, Red/Amber

#9

9. QUASCO Mini LED Signals

• Voltage: 12 V
• Lens Material: Glass
• Compatible with Vehicle Type: Motorcycle

Best for: Mini 8mm Mounting Signals.

Why it ranks #9: Mini-size blinkers use four high-power SMD LEDs each and an 8mm mounting bolt, with stated compatibility across many 12-volt motorcycles.

An 8mm mounting bolt and mini-size format make these QUASCO rear signals a compact option for many 12V DC motorcycles. Each blinker uses four high-power SMD LEDs, with brake and tail-light functions integrated alongside turn signals, so the small units consolidate rear lighting for riders seeking a reduced-size setup.

The 8mm mounting bolt gives buyers a specific mounting dimension to check, and the listing describes fitment across many 12V DC motorcycles, including several Harley, Honda, Kawasaki, Suzuki, Triumph, and Yamaha models. Four SMD LEDs per blinker provide the listed light source in a mini-size housing, while integrated brake, tail, and turn-signal functions combine rear-light roles. The waterproof feature is also specified, a relevant detail for exposed motorcycle installations.

Skip it if you need signals for a non-12V DC motorcycle; QUASCO specifies compatibility with 12V DC systems.

These QUASCO mini signals suit riders seeking compact, integrated rear lighting and an 8mm mounting bolt. Their listed compatibility is for 12V DC motorcycles, so check that electrical requirement and the mounting point against your bike.

Listed on Amazon as: Rear Motorcycle LED Turn Signals Universal Mini Size Brake Tail Light Blinkers Compatible with Harley Honda Kawasaki Suzuki Triumph Yamaha

#10

10. Anki HappiGo 90-LED Light

Best for: Bracket-Included Brake Signal Light.

Why it ranks #10: The listing identifies a 90-LED tail light with brake and turn signals plus a license plate bracket, but provides few other selection specifications.

An included license-plate bracket gives this Anki HappiGo tail light a ready-made plate-mounting component, while its title identifies brake and turn-signal functions. The listing names the unit as an upgraded 90-LED motorcycle tail light, making it relevant to riders seeking a multi-LED rear-light assembly with a bracket.

The included license-plate bracket is the clearest installation feature: it provides a plate-mounting component alongside the tail light rather than requiring a separately listed bracket. The product title specifies 90 LEDs and brake and turn-signal functions, so buyers can identify its stated lighting roles when comparing replacement options. Since the supplied specifications do not state voltage or mounting dimensions, confirm those requirements through the product information available for your motorcycle before planning wiring or installation.

Skip it if you need an operating voltage stated before selecting a lamp; Anki HappiGo’s supplied specifications do not provide one.

This Anki HappiGo suits a rider seeking a bracket-included tail light with 90 LEDs and listed brake and turn-signal functions. The supplied specifications omit operating voltage, so establish electrical compatibility before choosing it.

Listed on Amazon as: Upgrade 90LEDs Motorcycle Tail Light with Brake & Turn Signal