Best Motorcycle Rack For RV: Compare 10 Hitch Carriers

Best Motorcycle Rack For RV

A strong motorcycle rack for an RV needs a compatible 2-inch hitch, enough capacity for the bike, and a loading setup you can manage safely. The Black Widow Aluminum Motorcycle Carrier leads this roundup because it specifies fit with Class III or IV 2-inch receivers, a 400-pound capacity, an included ramp, and an anti-rattle device. Other options raise capacity to 600 pounds, offer longer or self-storing ramps, or include straps and hitch stabilizers.

The key caveat is that a receiver size alone does not confirm that a carrier is suitable for your RV: vehicle and hitch limits still matter. Compare the listed fit, load rating, material, and included parts, then verify your RV’s receiver and allowable loads before choosing.

The Black Widow Aluminum Motorcycle Carrier is the leading pick for RV owners whose receiver and hitch limits are compatible. It explicitly fits Class III or IV 2-inch receivers, carries up to 400 pounds, and includes a loading ramp and anti-rattle device. Its aluminum construction is another distinguishing feature.

If your motorcycle exceeds 400 pounds, consider a higher-capacity option instead, but confirm that both your RV hitch and vehicle can support the carrier and loaded bike before using any hitch rack.

Our Top Picks

Black Widow Aluminum CarrierBest Overall

Black Widow Aluminum Carrier

Specifies Class III or IV 2-inch receiver fit, a 400-pound capacity, an included ramp, and an anti-rattle device for a defined setup.

View on Amazon
Goplus Motorcycle CarrierBest 600-Pound Steel

Goplus Motorcycle Carrier

Offers 600-pound capacity, steel construction, two straps, and a loading ramp; its specifications identify vehicles with a 2-inch receiver.

View on Amazon
VEVOR Steel CarrierLongest Listed Ramp

VEVOR Steel Carrier

Combines a 600-pound rating with a 47-inch ramp, ratchet straps, and a stabilizer, though the listing specifies car compatibility.

View on Amazon

Compare motorcycle carriers by fit, capacity, and features

#ProductLoad CapacityMaterial TypeCompatible with Vehicle TypeBuy
1400 lbAluminumMotorcycleView on Amazon
2
Goplus Motorcycle Carrier2. Goplus Motorcycle CarrierBest 600-Pound Steel
600 lbSteelvehicle with 2" receiverView on Amazon
3
VEVOR Steel Carrier3. VEVOR Steel CarrierLongest Listed Ramp
600 lbQ235B SteelCarView on Amazon
4
ECOTRIC 600-Pound Carrier4. ECOTRIC 600-Pound CarrierHigher-capacity steel hauler
600 lbsteelDirt MotorcycleView on Amazon
5
VEVOR Aluminum Carrier5. VEVOR Aluminum CarrierAluminum 600-Pound
600 lbAluminumScooterView on Amazon
6500 lbSteelCar, Truck, VanView on Amazon
7
Mockins Tilting Carrier 10-Year7. Mockins Tilting Carrier 10-YearTilting rack for wide tires
500 lbSteelCar, Truck, VanView on Amazon
8
RIGMEC Two-Bike Carrier8. RIGMEC Two-Bike CarrierTwo-bike steel carrier
600 lbSteelMotorcycleView on Amazon
9
ECOTRIC 500-Pound Carrier9. ECOTRIC 500-Pound CarrierCompact 500-pound carrier
500 lbsteelScooter, TrailerView on Amazon
10
Jeremywell 500-Pound Carrier10. Jeremywell 500-Pound CarrierSteel carrier with anti-tilt lock
500 lbAlloy SteelTruckView on Amazon

Detailed Reviews: Best Motorcycle Rack For RV

Black Widow Aluminum Carrier

#1 · Best Overall

1. Black Widow Aluminum Carrier

  • Load Capacity: 400 lb
  • Material Type: Aluminum
  • Compatible with Vehicle Type: Motorcycle

Best for: Aluminum carrier for e-bikes.

Why it ranks #1: Specifies Class III or IV 2-inch receiver fit, a 400-pound capacity, an included ramp, and an anti-rattle device for a defined setup.

A 400-pound aluminum frame paired with a ramp that mounts on either side gives this Black Widow carrier a practical edge for loading from the available approach. It fits Class III or IV 2-inch hitch receivers, carrying motorcycles, e-bikes, or fat-tire bikes without requiring a bulky trailer.

The roll-on, roll-off ramp supports loading without lifting the bike onto the platform, then secures flat against the carrier when it is not in use to keep storage compact. Its side-swapping installation lets you choose the approach that suits your parking position. Aluminum construction keeps the carrier material distinct from steel alternatives, while the included anti-rattle device helps minimize movement in transit. The 400-pound load limit sets a clear boundary for heavier motorcycles.

Pros
  • 400-pound load capacity
  • Aluminum construction
  • Ramp installs on either side and stores flat
  • Anti-rattle device included
Cons
  • The 400-pound capacity rules out bikes above that load limit.

Skip it if you need more than 400 pounds of capacity; the steel ECOTRIC ET-008A+ET-008B is rated for 600 pounds.

This suits riders carrying an e-bike, fat-tire bike, or motorcycle within 400 pounds who want a ramp that can approach from either side. Check the bike’s loaded weight against the limit and confirm the vehicle has a compatible 2-inch receiver.

Full product details
BrandBlack Widow
Colormetallic
Compatible with Vehicle TypeMotorcycle
Included ComponentsAnti-tilt device, Loading ramp, Youth bike spacer adapter bar
Load Capacity400 lb
ManufacturerBlack Widow
Part NumberAMC-400
Manufacturer Warranty Description1 Year
MaterialAluminum
Model NumberAMC-400

Listed on Amazon as: Black Widow Aluminum Motorcycle Hitch Carrier with Ramp for eBike, 400 lb

View on Amazon
Goplus Motorcycle Carrier

#2 · Best 600-Pound Steel

2. Goplus Motorcycle Carrier

  • Load Capacity: 600 lb
  • Material Type: Steel
  • Compatible with Vehicle Type: vehicle with 2" receiver

Best for: Straps and ramp included.

Why it ranks #2: Offers 600-pound capacity, steel construction, two straps, and a loading ramp; its specifications identify vehicles with a 2-inch receiver.

Two straps and a loading ramp come with Goplus’s 600-pound steel carrier, giving riders key loading and securing components in one listed package. Its title specifies tires up to 7.5 inches wide, while the 2-inch receiver fit makes it relevant to vehicles with that hitch size.

The supplied ramp supports rolling a motorcycle onto the carrier, while the two included straps provide listed tie-downs for transport. Steel construction is described as strong and tough, and the 600-pound capacity gives a defined upper load boundary. Goplus specifies tires up to 7.5 inches wide, which helps buyers assess tire fit before loading. The product information recommends not exceeding 55 mph when carrying a motorcycle, an operating limit to factor into travel plans.

Pros
  • 600-pound load capacity
  • Loading ramp included
  • Two straps included
  • Fits tires up to 7.5 inches wide
Cons
  • The supplied guidance recommends keeping speed below 55 mph when carrying a motorcycle.

Skip it if you need a carrier rated above 600 pounds; no listed product here exceeds that capacity.

This is a practical match for riders with a motorcycle that fits the 7.5-inch tire limit and a vehicle with a 2-inch receiver. Its ramp and two straps are specified, but the supplied guidance also sets a 55-mph speed recommendation.

Full product details
BrandGoplus
Colorblack
Compatible with Vehicle Typevehicle with 2" receiver
Item Weight98 pounds
Load Capacity600 pounds
ManufacturerSuperbuy
Part NumberAT4338+XIN
MaterialSteel

Listed on Amazon as: Goplus Motorcycle Hitch Carrier, 600LBS Motorcycle Carrier Hitch Mount with 2 Straps, Loading Ramp, Dirt Bike Trailer, Heavy Duty Motor Cycle Rack, Fit Up to 7.5” Wide Tire

View on Amazon
VEVOR Steel Carrier

#3 · Longest Listed Ramp

3. VEVOR Steel Carrier

  • Load Capacity: 600 lb
  • Material Type: Q235B Steel
  • Compatible with Vehicle Type: Car

Best for: Long-ramp steel carrier.

Why it ranks #3: Combines a 600-pound rating with a 47-inch ramp, ratchet straps, and a stabilizer, though the listing specifies car compatibility.

VEVOR’s 47-inch ramp is the defining loading feature of this 600-pound steel motorcycle carrier, giving riders a longer specified surface for rolling a bike onto the rack. A 76-by-7-inch platform provides room for loading, while the product is intended for vehicles with a 2-inch hitch receiver.

The 47-inch ramp pairs with a 600-pound load rating, supporting roll-on loading for motorcycles within the carrier’s stated limit. Its 76-by-7-inch platform gives buyers concrete dimensions to compare with a bike’s footprint, while Q235B steel forms the carrier structure. VEVOR lists ratchet straps and a stabilizer among the product features, which address tie-down and carrier movement during transport. The recommended installation height, measured from center hole to ground, is 7.87 to 19.7 inches.

Pros
  • 600-pound load capacity
  • 47-inch loading ramp
  • 76-by-7-inch carrier platform
  • Ratchet straps and stabilizer specified
Cons
  • The recommended center-hole-to-ground installation height is limited to 7.87–19.7 inches.

Skip it if you cannot meet the listed 7.87–19.7-inch installation-height range; that measurement is specified for this carrier.

This VEVOR fits riders seeking a 600-pound steel carrier with a longer ramp, listed straps, and a stabilizer. Before choosing it, measure the recommended center-hole-to-ground installation height and compare the 76-by-7-inch platform with the bike.

Full product details
BrandVEVOR
ColorBlack
Compatible with Vehicle TypeCar
Included Components1 x Motorcycle Hitch Carrier
Item Dimensions77 x 33.1 x 6.1 inches
Item Weight61.7 pounds
Dimensions77 x 33.1 x 6.1 inches
Load Capacity600 pounds
ManufacturerVEVOR
Part Number600 LBS Steel Motorcycle Carrier
MaterialQ235B Steel
Model NumberTD-1004-03

Listed on Amazon as: VEVOR Motorcycle Carrier, 600 LBS Steel Motorcycle Carrier Hitch Mount with 47" Longer Ramp, Scooter Dirt Bike Trailer Hauler with Ratchet Straps and Stabilizer, for Car, Truck with 2" Hitch Receiver

View on Amazon
ECOTRIC 600-Pound Carrier

#4

4. ECOTRIC 600-Pound Carrier

  • Load Capacity: 600 lb
  • Material Type: steel
  • Compatible with Vehicle Type: Dirt Motorcycle

Best for: Higher-capacity steel hauler.

Why it ranks #4: Its steel carrier is rated for 600 pounds, giving heavier bikes more stated capacity than the 400- and 500-pound alternatives.

A 600-pound capacity makes the ECOTRIC steel hitch carrier an option for riders whose motorcycle exceeds lighter carriers’ limits. Its steel construction is described as tough enough to hold a bike firmly, and a rustproof coating is specified for wet-weather use, making it relevant for varied transport conditions.

The 600-pound rating expands the range of motorcycle weights this carrier can handle compared with lower-capacity options, while its steel construction supplies the stated strength and toughness for carrying a bike. ECOTRIC also specifies a rustproof coating, a practical consideration for riders transporting a motorcycle in rain. The supplied information identifies it as a dirt motorcycle carrier and includes the carrier mount, but does not list a ramp or straps, so plan loading around the components actually specified.

Pros
  • 600-pound load capacity
  • Steel construction
  • Rustproof coating specified for wet-weather use
  • Specified for dirt motorcycles
Cons
  • A loading ramp and tie-down straps are not listed among the included components.

Skip it if you need a supplied loading ramp; the Goplus AT4338+XIN lists a ramp and two straps.

Choose this ECOTRIC for a dirt motorcycle weighing no more than 600 pounds when steel construction and a rustproof coating matter. The listed components include the carrier mount only, so it is a less complete choice for buyers seeking a specified ramp or tie-down kit.

Full product details
BrandECOTRIC
ColorBLACK
Compatible with Vehicle TypeDirt Motorcycle
Included ComponentsMotorcycle Carrier Mount
Load Capacity600 pounds
ManufacturerECOTRIC
Part NumberET-008A+ET-008B
Materialsteel
Model NumberET-008A+ET-008B

Listed on Amazon as: ECOTRIC 600LBS Black Motorcycle Carrier Mount Dirt Bike Rack Hitch Hauler |

View on Amazon
VEVOR Aluminum Carrier

#5 · Aluminum 600-Pound

5. VEVOR Aluminum Carrier

  • Load Capacity: 600 lb
  • Material Type: Aluminum
  • Compatible with Vehicle Type: Scooter

Best for: Aluminum carrier with self-storing ramp.

Why it ranks #5: Pairs aluminum construction with a 600-pound stated capacity and a self-storing 3.9-foot ramp; receiver fit for an RV is not specified.

A 3.9-foot self-storing ramp lets this VEVOR aluminum carrier support roll-on motorcycle loading and attach the ramp to the carrier between uses. The listing gives it a 600-pound capacity, making it an option for riders seeking aluminum construction without giving up a high stated load limit.

The self-storing ramp can remain attached when not in use, avoiding a separate storage step for that component. Aluminum construction distinguishes the carrier material, while the 600-pound rating defines the maximum listed load. Its stated dimensions are 74.8 by 59.06 by 4.72 inches, useful for checking available storage and vehicle clearance. VEVOR describes the carrier as able to carry two motorcycles, but the total 600-pound capacity remains the governing limit for the combined load.

Pros
  • 600-pound load capacity
  • Aluminum construction
  • 3.9-foot ramp stores on the carrier
  • Listing states capacity for two motorcycles
Cons
  • The 600-pound total capacity must cover both motorcycles when carrying two.

Skip it if you need a steel carrier with listed ratchet straps; the RIGMEC BGH6JMYT7765 specifies steel and includes ratchet straps.

This VEVOR suits riders who value aluminum construction and a ramp that attaches to the carrier after loading. It is listed for two motorcycles, but their combined weight must stay within 600 pounds and the platform dimensions should suit the vehicle.

Full product details
BrandVEVOR
ColorSilver
Compatible with Vehicle TypeScooter
Included Components1 x Motorcycle Hitch Carrier
Item Dimensions74.8 x 59.06 x 4.72 inches
Item Weight68.3 pounds
Dimensions74.8 x 59.06 x 4.72 inches
Load Capacity600 Pounds
ManufacturerVEVOR
Part NumberAluminum Motorcycle Carrier 600 LBS
MaterialAluminum
Model NumberTD-1004-08

Listed on Amazon as: VEVOR Motorcycle Carrier, 600 LBS Aluminum Motorcycle Carrier Hitch Mount

View on Amazon
Mockins Tilting Carrier

#6 · Tilting Ramp

6. Mockins Tilting Carrier

  • Load Capacity: 500 lb
  • Material Type: Steel
  • Compatible with Vehicle Type: Car, Truck, Van

Best for: Tilting carrier with tie-down kit.

Why it ranks #6: The 500-pound steel carrier has an 83-inch frame, tilting ramp, hitch stabilizer, hitch lock, and included ratchet and loop straps.

A tilting ramp distinguishes this 83-inch Mockins carrier, enabling a loading approach that the listing says makes mounting and dismounting easier. It supports loads up to 500 pounds and tires up to 5.5 inches wide, with a 2-inch receiver fit for cars, trucks, and vans.

The tilting ramp is paired with an 83-by-6-inch steel frame, giving riders a specified platform and a ramp arrangement intended to ease mounting and dismounting. Its 500-pound limit and 5.5-inch tire-width maximum set clear fit boundaries for motorcycles, scooters, and e-bikes. Included ratchet and loop straps support securing the load, while the hitch stabilizer and lock address the receiver connection. A license plate holder and accessory storage bag are also listed.

Pros
  • Tilting ramp for mounting and dismounting
  • 500-pound load capacity
  • Supports tires up to 5.5 inches wide
  • Ratchet straps, loop straps, stabilizer, and hitch lock included
Cons
  • The 500-pound load limit excludes heavier motorcycles.

Skip it if you need to carry more than 500 pounds; the VEVOR TD-1004-03 is listed with a 600-pound capacity.

This Mockins suits car, truck, or van owners wanting a tilting ramp and a substantial listed tie-down kit for a bike under 500 pounds. Keep the 5.5-inch tire-width and 2-inch receiver specifications in view when assessing fit.

Full product details
BrandMockins
ColorBlack
Compatible with Vehicle TypeCar, Truck, Van
Included Components1 x Hitch Mount Motorcycle Carrier with Tilting Ramp (Patent Pending) with 1 x License Plate Holder, 1 x Hitch Stabilizer and 1 x Hitch Lock, 1 x Set of Reflector Stickers, 1 x Storage Bag for Accessories, 4 x Heavy-Duty Ratchet Straps and 4 x Strong Loop Straps
Item Dimensions83 x 6 x 8 inches
Item Weight75 pounds
Dimensions83 x 6 x 8 inches
Load Capacity500 Pounds
ManufacturerMockins
Part NumberMA-HM-DBC-83-TLTS-96
Manufacturer Warranty Description5 Year Limited Warranty
MaterialSteel
Model NumberMA-HM-DBC-83-TLTS-96

Listed on Amazon as: Mockins 83" Tilting Motorcycle Hitch Carrier with Ramp w/ 500 Lbs. Capacity

View on Amazon
Mockins Tilting Carrier 10-Year

#7

7. Mockins Tilting Carrier 10-Year

  • Load Capacity: 500 lb
  • Material Type: Steel
  • Compatible with Vehicle Type: Car, Truck, Van

Best for: Tilting rack for wide tires.

Why it ranks #7: Lists a 500-pound capacity, 83-inch steel frame, tilting ramp, 2-inch receiver fit, stabilizer, lock, and 10-year limited warranty.

Support for tires up to 5.5 inches wide gives this 83-inch Mockins carrier a defined fit range for fat-tire e-bikes and other listed bikes. Its tilting ramp is intended to ease loading and unloading, and the steel rack carries up to 500 pounds on a 2-inch receiver.

The tilting ramp works with an 83-by-6-inch steel frame to provide a specified loading arrangement and platform size. A 5.5-inch tire-width maximum helps buyers assess whether a fat-tire bike fits, while the 500-pound capacity limits the combined load. The listed kit includes four heavy-duty ratchet straps and four loop straps, plus a hitch stabilizer and lock. Cars, trucks, and vans are listed as compatible vehicle types, all with a 2-inch receiver requirement.

Pros
  • Tilting ramp included
  • Supports tires up to 5.5 inches wide
  • Four ratchet straps and four loop straps included
  • Hitch stabilizer and lock included
Cons
  • The 500-pound capacity sets a firm ceiling for the loaded bike.

Skip it if you need to carry a motorcycle exceeding 500 pounds; the RIGMEC BGH6JMYT7765 is rated for 600 pounds total.

This Mockins fits riders transporting a bike under 500 pounds whose tires are no wider than 5.5 inches, especially those who want a tilting ramp and extensive straps. Confirm the vehicle has a 2-inch receiver and suits the 83-inch frame.

Full product details
BrandMockins
ColorBlack
Compatible with Vehicle TypeCar, Truck, Van
Included Components1 x Hitch Stabilizer and 1 x Hitch Lock, 1 x License Plate Holder, 1 x Storage Bag for Accessories, 1 x Tilting Ramp Motorcycle Carrier (Patent Pending), 4 x Heavy-Duty Ratchet Straps and 4 x Strong Loop Strap
Item Dimensions83 x 6 x 8 inches
Item Weight78 pounds
Dimensions83 x 6 x 8 inches
Load Capacity500 Pounds
ManufacturerMockins
Part NumberMA-HM-DBC-83-TILT-96
Manufacturer Warranty Description10 Year Limited Warranty
MaterialSteel
Model NumberMA-HM-DBC-83-TILT-96

Listed on Amazon as: Mockins 83" Tilting Dirt Bike Carrier Hitch Mount Rack w/ 500 Lbs. Capacity

View on Amazon
RIGMEC Two-Bike Carrier

#8

8. RIGMEC Two-Bike Carrier

  • Load Capacity: 600 lb
  • Material Type: Steel
  • Compatible with Vehicle Type: Motorcycle

Best for: Two-bike steel carrier.

Why it ranks #8: States 600 pounds total capacity for two tracks and includes a self-storing 47-inch ramp, but its listed vehicle type is motorcycle.

A two-track layout and 600-pound total capacity make the RIGMEC a specific option for transporting two motorcycles on one hitch carrier. Its 47-inch self-storing ramp supports roll-on loading, while the listing assigns a 400-pound capacity per track to clarify how the load is divided.

The self-storing ramp attaches to the carrier when not in use, keeping that loading component with the rack between trips. Steel construction is paired with an anodized finish in the description, and included ratchet straps and an anti-rattle stabilizer address securing the motorcycles and limiting carrier movement. The 600-pound total capacity and 400-pound-per-track rating are important when carrying two bikes: each track and the combined load must remain within its stated limit.

Pros
  • 600-pound total capacity for two motorcycles
  • 400-pound capacity per track
  • 47-inch self-storing loading ramp
  • Ratchet straps and anti-rattle stabilizer included
Cons
  • Each track is limited to 400 pounds, even though total capacity is 600 pounds.

Skip it if you need a stated 500-pound single-bike carrier with a tilting ramp; the Mockins MA-HM-DBC-83-TILT-96 lists that setup.

This RIGMEC suits riders transporting one or two motorcycles who can work within both the 400-pound-per-track and 600-pound-total limits. The self-storing ramp, straps, and stabilizer support loading and securing, while the two-track format is the key fit consideration.

Full product details
BrandRIGMEC
ColorBlack for 2 bikes
Compatible with Vehicle TypeMotorcycle
Item Weight85.3 pounds
Load Capacity600 Pounds
ManufacturerRIGMEC
Part NumberMotorcycle Carrier 600 LBS
MaterialSteel
Model NumberBGH6JMYT7765

Listed on Amazon as: Heavy Duty 600 lb Motorcycle Hitch Carrier for 2 Bikes

View on Amazon
ECOTRIC 500-Pound Carrier

#9

9. ECOTRIC 500-Pound Carrier

  • Load Capacity: 500 lb
  • Material Type: steel
  • Compatible with Vehicle Type: Scooter, Trailer

Best for: Compact 500-pound carrier.

Why it ranks #9: Provides a 500-pound steel carrier with a 38.5-inch ramp and 2-inch receiver design; the hitch pin is not included.

A 38.5-inch loading ramp and a 76-by-7-inch carrier platform give this ECOTRIC hauler clearly specified dimensions for planning motorcycle loading and storage. It mounts to a 2-inch square receiver and supports up to 500 pounds, covering a range of scooters and dirt bikes within that limit.

The stated 38.5-inch ramp provides a defined loading surface, while the 76-inch overall carrier length helps buyers assess how the rack will extend behind a vehicle. Its 7-inch width and 500-pound rating set practical limits for motorcycle fit and weight. The carrier is steel and is specified for a 2-inch square receiver. One installation detail matters: the hitch pin is not included, so arrange that separate component before mounting.

Pros
  • 500-pound load capacity
  • 38.5-inch loading ramp
  • 76-inch overall carrier length
  • Fits a 2-inch square receiver
Cons
  • The hitch pin is not included.

Skip it if you want the hitch pin included; the listed package does not supply one, so you will need to provide it separately.

This ECOTRIC suits scooter or dirt-bike owners with a load under 500 pounds who want a measured ramp and platform for planning. It fits a 2-inch square receiver, but the hitch pin must be sourced separately before installation.

Full product details
BrandECOTRIC
Colorblack
Compatible with Vehicle TypeScooter, Trailer
Included Components1 x complete set of Motorcycle Trailer Hitch Carrier
Item Dimensions40.55 x 11.81 x 9.06 inches
Dimensions40.55 x 11.81 x 9.06 inches
Load Capacity500 Pounds
ManufacturerECOTRIC
Part NumberECOTNSMRC001
Materialsteel
Model NumberVC-T-NS-MRC001T

Listed on Amazon as: ECOTRIC 500LBS Motorcycle Trailer Hitch Carrier Scooter Dirt Bike Hauler

View on Amazon
Jeremywell 500-Pound Carrier

#10

10. Jeremywell 500-Pound Carrier

  • Load Capacity: 500 lb
  • Material Type: Alloy Steel
  • Compatible with Vehicle Type: Truck

Best for: Steel carrier with anti-tilt lock.

Why it ranks #10: Its 500-pound alloy-steel carrier includes a 38.5-inch detachable ramp and anti-tilt device, but listed vehicle compatibility is truck.

An anti-tilt locking device is a key feature of this 500-pound Jeremywell steel carrier, helping minimize movement and hitch wobble during motorcycle transport. Its detachable 38.5-inch ramp supports loading and stores separately when not in use, making it a straightforward hitch-rack option for bikes within its capacity.

The 38.5-inch detachable ramp provides a defined surface for loading and can be removed for storage between trips. Alloy steel construction supports the listed 500-pound capacity, while the anti-tilt locking device is specified to help reduce carrier movement at the hitch. The product is identified as compatible with trucks, and the supplied dimensions are 40 by 11 by 8 inches. Its listed components include assembly instructions, so the ramp and locking device are the notable specified transport features.

Pros
  • 500-pound load capacity
  • Detachable 38.5-inch loading ramp
  • Anti-tilt locking device included
  • Alloy steel construction
Cons
  • The listed compatible vehicle type is truck, limiting its specified vehicle fit.

Skip it if you need a carrier specified for cars and vans as well as trucks; the Mockins MA-HM-DBC-83-TLTS-96 lists all three.

This Jeremywell suits truck owners carrying a motorcycle, dirt bike, dual-sport bike, or e-bike within 500 pounds who want a detachable ramp and anti-tilt device. Its supplied vehicle compatibility is listed for trucks, a key boundary for other setups.

Full product details
BrandJeremywell
ColorBlack
Compatible with Vehicle TypeTruck
Included ComponentsAssembly Instruction
Item Dimensions40 x 11 x 8 inches
Item Weight55 pounds
Dimensions40 x 11 x 8 inches
Load Capacity500 pounds
ManufacturerJeremywell
Part NumberT-NS-MRC001
Manufacturer Warranty Description1 Year Manufacturers Warranty
MaterialAlloy Steel
Model NumberT-NS-MRC001

Listed on Amazon as: 500 lbs Heavy Duty Motorcycle Dirt Bike Scooter Carrier Hitch Rack Hauler Trailer with Loading Ramp and Anti-Tilt Locking Device T-NS-MRC001

View on Amazon

RV hitch fit is more than receiver size

A matching 2-inch receiver is necessary for several of these carriers, but it does not establish that an RV can safely carry a loaded rack. The Black Widow listing specifies Class III or IV 2-inch receivers; Goplus lists vehicles with a 2-inch receiver; the Mockins products also specify 2-inch receivers. Those details describe receiver fit, not the allowable load of a particular RV hitch or the RV chassis.

A carrier and motorcycle also extend behind the receiver, so the installed load acts farther back than a load placed directly at the hitch. Check the RV and hitch manufacturer’s limits for this use, including any applicable reduced capacity for an extended load.

If those limits or permitted use are unclear, ask the manufacturer before buying. Do not treat the carrier’s 500- or 600-pound rating as an RV rating.

Plan for rear clearance and loading access

A hitch carrier can create practical RV access and clearance conflicts even when its receiver fits. The listed carriers occupy substantial space: the Mockins models are 83 inches long, while the VEVOR steel carrier measures 77 inches long and 33.1 inches wide. Those dimensions can matter when checking access to rear doors, storage compartments, lights, and the space needed to load a motorcycle.

A ramp also needs room to extend behind the vehicle; the VEVOR steel option lists a 47-inch ramp, and the ECOTRIC 500-pound option lists a 38.5-inch ramp. Measure the available clearance at the intended parking and loading locations, and account for the carrier’s rearward extension when considering departure angle or uneven ground.

These product dimensions do not guarantee clearance on any particular RV, so compare them with your vehicle’s layout before committing.

How to Choose an RV Motorcycle Carrier

Rated load capacity

Look for a carrier rating that exceeds the actual motorcycle’s weight, while also checking the RV and hitch limits separately. These options range from the Black Widow’s 400 pounds to several 600-pound carriers; the Mockins models and some ECOTRIC and Jeremywell options list 500 pounds. RIGMEC states 600 pounds total for two tracks, with 400 pounds per track, so its two-bike capacity should not be read as permission to load 600 pounds on one track.

A lighter bike may suit the 400-pound Black Widow if all vehicle limits agree. Heavier motorcycles may point toward a 600-pound model, but only when the RV setup allows that load.

Ramp design and loading space

Choose a ramp arrangement that matches your loading area and how you plan to roll the bike on. Listed ramp details vary: ECOTRIC and Jeremywell provide 38.5-inch ramps, while VEVOR Steel and RIGMEC list 47-inch ramps. Black Widow’s ramp installs on either side and secures flat against the carrier; the VEVOR aluminum model has a self-storing 3.9-foot ramp, and the Mockins models use a tilting ramp.

A shorter ramp may suit a constrained setup if you can safely manage its incline, while a longer or tilting arrangement may better suit buyers who need a different loading approach. Confirm there is room behind the RV to deploy the ramp.

Material, fit, and included stability parts

Match the material and listed fit to your RV setup, then note which stability parts come with the carrier. The Black Widow is aluminum and specifies Class III or IV 2-inch receivers; steel options include Goplus, ECOTRIC, VEVOR Steel, and Mockins. Included equipment differs: Black Widow lists an anti-rattle device, Goplus lists two straps, and Mockins includes a stabilizer, hitch lock, and straps.

Jeremywell lists an anti-tilt device but does not list straps among its included components. Aluminum may appeal if material is a priority, while steel models offer different capacity and equipment combinations.

Neither material nor an included stabilizer substitutes for confirming that your RV hitch is rated for the loaded carrier.

Which motorcycle carrier should RV owners choose?

For an RV with a confirmed compatible Class III or IV 2-inch receiver and a motorcycle within 400 pounds, choose the Black Widow Aluminum Carrier for its clearly stated fit, ramp, and anti-rattle device. If you need a 600-pound-rated steel option and your RV permits the load, Goplus Motorcycle Carrier lists 2-inch receiver compatibility and includes two straps and a ramp. For a 47-inch ramp, consider VEVOR Steel Carrier, but its listing says car compatibility, so verify RV suitability rather than assuming it.

Riders who prioritize a tilting ramp and supplied stabilizing gear can compare Mockins Tilting Carrier and its 500-pound limit. In every case, verify the RV hitch and vehicle limits, rear clearance, and loading space before purchase; a carrier’s own rating cannot confirm RV compatibility.

Frequently Asked Questions

How do I check whether my RV hitch can support a motorcycle carrier and loaded bike?

Check the RV and hitch documentation for the receiver class, receiver size, and allowable loads, then compare those limits with the carrier and the combined carrier-and-motorcycle load. Do not rely on the carrier’s rating alone. If any limit or compatibility detail is unclear, confirm it with the RV or hitch manufacturer before use.

Will a hitch-mounted motorcycle rack affect my RV’s departure angle or access to rear compartments?

It may reduce rear clearance or obstruct access, depending on the rack, motorcycle, and RV layout. Check the loaded setup’s clearance and whether it blocks doors, compartments, lights, or other equipment. Consider the RV’s departure angle and loading space, and verify that the rack can be used without interfering with required access or visibility.

What additional straps or lighting may I need to transport a motorcycle legally and securely?

Use appropriate tie-downs to secure the motorcycle, and check whether the carrier includes straps or stabilizing hardware; listings vary. Make sure the motorcycle or carrier does not obscure required lights or reflectors, and follow applicable transport rules. If visibility is blocked, determine what additional lighting or visibility equipment is required before traveling.

How should I compare carriers with different stated weight limits?

Compare each carrier’s stated limit with your motorcycle’s weight, then separately verify the RV hitch and vehicle can support the loaded combination. The listed limits vary in these options, and a higher carrier rating does not establish RV compatibility. If the motorcycle exceeds a carrier’s stated capacity, choose a suitable higher-capacity option only after confirming the RV limits.

How much room should I allow to load a motorcycle onto a carrier?

Allow enough clear space behind the RV to position and use the ramp, guide the motorcycle onto the carrier, and secure it safely. Ramp lengths and designs differ among these listings, so check the chosen product’s details and your available loading area. Also account for rear clearance and access to RV compartments once loaded.

Final Words

For a compatible Class III or IV 2-inch receiver and a motorcycle within 400 pounds, the Black Widow Aluminum Carrier is the clearest choice: its listing specifies the fit and capacity and includes a ramp and anti-rattle device. Consider Goplus if you need a listed 600-pound capacity, or Mockins for a tilting ramp and supplied stabilizing gear. Before choosing any option, confirm RV and hitch limits, clearance, access, and loading space.

Leave a Reply

Your email address will not be published. Required fields are marked *