Best Motorcycle Loading Ramps For Vans: Compare 10 Options

#1 · Best Overall

1. Stalwart 69-Inch Ramps

• Dimensions: 69.5"L x 8.86"W x 1.57"H
• Weight: 30.9 lb
• Load Capacity: 2200 lb
• Material: Alloy Steel

Best for: Long steel ramp pair.

Why it ranks #1: The listing explicitly mentions moving motorcycles and dirt bikes in and out of vans; the pair measures 69.5 inches and has 2,200-pound combined capacity.

Two 69.5-inch folding steel ramps give the Stalwart set a longer approach for loading motorcycles, ATVs, mowers, and carts into a truck, trailer, or shed. Each ramp is rated for 1,100 pounds, with a stated 2,200-pound combined capacity and recommended use height of 34 inches.

The 69.5-inch length and 34-inch recommended use height help buyers assess whether the ramps suit the rise into a van or trailer. Each 8.86-inch-wide alloy-steel ramp is rated for 1,100 pounds, and the set is listed at 2,200 pounds combined for four-wheeled vehicles. The folding design supports storage, but the pair weighs 30.9 pounds, a practical consideration when carrying or positioning the ramps.

Skip it if you need a short, low-profile shed transition; the Stalwart 75-CAR1066 ramps are 35.5 inches long.

This pair suits buyers loading heavier equipment where two tracks, a long approach, and the stated capacity fit the job. Check the 34-inch recommended use height against your loading setup, and account for the 30.9-pound set weight.

Listed on Amazon as: Loading Ramps – Set of Two 69-Inch Folding Ramps for ATVs, Motorcycles, Mowers, Carts, and More – 2200lb Combined Capacity Car Ramp Set by Stalwart

#2 · Short Ramp Set

2. Stalwart 35.5-Inch Ramps

• Dimensions: 35.5"L x 8.5"W x 2"H
• Weight: 9 lb
• Load Capacity: 600 lb
• Material: Alloy Steel

Best for: Compact shed and van ramps.

Why it ranks #2: Its listing specifically describes using the pair separately to move scooters and dirt bikes in and out of vans; each ramp is rated for 600 pounds.

The Stalwart set pairs two 35.5-inch steel ramps, each rated for 600 pounds, for short loading transitions into a shed, trailer, or van. Used together, the listing gives a 1,200-pound combined capacity; the ramps can also be bolted together for a 17-inch-wide angled track.

At 35.5 inches long, these low-profile ramps fit loading situations where a short transition is appropriate, rather than setups requiring a long approach. Each ramp can handle up to 600 pounds, and the pair’s combined rating is 1,200 pounds for four-wheeled vehicles. The ramps may be used separately for scooters and dirt bikes or bolted together, though the bolts are not included, so joining them requires separate hardware.

Skip it if you need a longer loading path; the Stalwart 75-CAR2025 ramps measure 69.5 inches long.

Choose this set for a low-profile, short transition into a van, shed, or trailer when its per-ramp and combined capacities suit the load. Its 35.5-inch length is the main boundary, and joining the tracks requires bolts not supplied.

Listed on Amazon as: Loading Ramps – Set of Two 35.5-Inch Ramps for ATVs, Motorcycles, Mowers, Carts, and More – 1200lb Combined Capacity Shed Ramp Set by Stalwart

#3 · Included Safety Straps

3. Arejonner 72.5-Inch Ramps

• Dimensions: 72.5"L x 8.7"W x 1.8"H
• Weight: 34.1 lb
• Load Capacity: 1500 lb
• Material: Alloy Steel

Best for: Traction-focused equipment loaders.

Why it ranks #3: The steel pair has 1,500-pound capacity and includes four safety straps and gloves, useful additions for securing ramps during van loading.

A dense perforated steel surface is the key feature of the Arejonner 72.5-inch ramp pair, giving tires a grippy path while loading motorcycles and other listed equipment. Four safety straps secure the ramps, and included gloves support setup; the pair has a stated 1,500-pound capacity.

The 72.5-by-8.7-inch ramps fold for storage, while their alloy-steel construction and 34.1-pound listed weight are relevant to carrying and handling the set. The perforated surface is specified to increase traction and help prevent wheel slip in all weather, and four straps provide a way to secure the ramps during loading. They suit motorcycles, ATVs, mowers, and other listed equipment headed into a garage, shed, barn, or trailer.

Skip it if you need a lighter single-bike ramp; the 8.03-pound Gorkett LR036ZD-6FT is listed for single-track vehicles up to 440 pounds.

Choose this pair for loading motorcycles or mixed equipment where its traction surface, straps, and stated capacity suit the job. Its 34.1-pound weight matters if you frequently carry ramps by hand, and the 72.5-inch length should suit your loading setup.

Listed on Amazon as: 72.5" Heavy Duty Folding Loading Ramps, 1500lb Capacity, Ideal for Motorcycles, Lawn Mowers, ATVs, UTVs, and More – Pack of 2 with Safety Straps and Gloves

#4

4. Arejonner Sandblasted Ramps

• Dimensions: 71"L x 8.86"W x 3.5"H
• Weight: 34.1 lb
• Load Capacity: 1500 lb
• Material: Alloy Steel

Best for: Sandblasted steel ramp pair.

Why it ranks #4: This 71-inch steel pair is rated for 1,500 pounds and includes four safety straps; its sandblasted, perforated surface is specified to improve traction.

A sandblasted finish joins the dense perforated surface on this Arejonner pair, adding specified friction for loading motorcycles and other listed equipment. The ramps measure 71 inches long, include four securing straps and protective gloves, and have a stated 1,500-pound capacity.

The perforations and sandblasted finish are specified to improve traction and load support, which can help keep tires from slipping during loading. Four safety straps provide a means to secure the ramps, while gloves are included for installation. The 71-by-8.86-inch alloy-steel ramps fold for storage and weigh 34.1 pounds, so buyers should weigh the traction and capacity features against handling the set.

Skip it if you need a lighter single-track ramp; the 8.8-pound VENDAV B0FHJQLCRX is rated for bikes up to 440 pounds.

This pair suits buyers loading motorcycles or other listed equipment who value a traction-focused surface, straps, and a 1,500-pound rating. Its 34.1-pound weight and 71-inch length are relevant handling and storage considerations.

Listed on Amazon as: 72.5" Heavy Duty Folding Loading Ramps with Sandblasted Finish, 1500lb Capacity, Ideal for Motorcycles, Lawn Mowers, ATVs, UTVs, and More – Pack of 2 with Safety Straps and Gloves

#5 · Lightweight Folding

5. Gorkett 6-Foot Ramp

• Dimensions: 72.4"L x 6.4"W x 2"H
• Weight: 8 lb
• Load Capacity: lb 440
• Material: Aluminum

Best for: Portable single-bike loading.

Why it ranks #5: The single-track aluminum ramp weighs about 8 pounds and folds to 37.8 inches; its 440-pound capacity suits lighter two-wheel equipment.

At just 8.03 pounds, the folding Gorkett ramp is easy to carry between a van, truck bed, and garage, while its 72.4-inch length provides a loading path for single-track vehicles. It folds to 37.8 inches and is rated for loads up to 440 pounds.

The aluminum ramp’s folding design reduces its length from 72.4 to 37.8 inches, making storage in a vehicle or garage more manageable. Its 6.4-inch width and single-track specification suit a motorcycle or other single-track vehicle rather than a pair of wheel paths. The 440-pound capacity is the key load boundary, so this is a compact option for lighter bikes, not heavier equipment beyond that rating.

Skip it if you need capacity above 440 pounds; the MAXIVAMN Aluminum Bi-Fold Ramp is rated for 750 pounds.

This ramp suits riders who prioritize easy carrying and compact storage for a single-track bike within its 440-pound rating. Check that the vehicle’s weight and tire width work with the narrow 6.4-inch ramp before choosing it.

Listed on Amazon as: 6FT Folding Motorcycle Loading Ramp, 440 lb Aluminum Ramp for Bikes

#6

6. VENDAV Folding Ramp

• Dimensions: 42.17"L x 7.16"W x 6.13"H
• Weight: 8.8 lb
• Load Capacity: 440 lb
• Material: Aluminum

Best for: Lightweight 440-pound bike ramp.

Why it ranks #6: This aluminum single-track ramp weighs 8.8 pounds and is rated for 440 pounds; its listed open length is 84.56 inches.

At 8.8 pounds, this folding VENDAV ramp is easy to carry for two-wheel loading, with an 84.56-inch extended length and a 6.46-inch inner track width. Its single-track design is intended for motorcycles, dirt bikes, e-bikes, and bicycles up to its 440-pound capacity.

The 84.56-inch opened length provides the ramp path, while the 6.46-inch inner track sets a clear width consideration for tire compatibility. Aluminum construction and an 8.8-pound listed weight support carrying and storage between loading jobs, and the ramp folds for transport. Its single-track design is aimed at two-wheel equipment, with 440 pounds as the load ceiling; compare vehicle weight, tire width, and loading height with the specifications.

Skip it if you need a higher-rated single ramp; the VENDAV B0FF8YGLKD is rated for 750 pounds and measures 89 inches long.

Choose this ramp for a portable loading path for a lighter motorcycle, dirt bike, e-bike, or bicycle. Its 440-pound limit and 6.46-inch inner track are key boundaries, so compare the equipment weight and tire width before use.

Listed on Amazon as: Motorcycle Ramp, 440 lb Capacity, Folding Dirt Bike Ramp for Truck

#7

7. DNA MOTORING Folding Ramps

• Dimensions: 70"L x 9"W x 2.1"H
• Weight: 16.08 kg
• Load Capacity: 880 lb
• Material: High Density Polyethylene (HDPE)

Best for: Portable two-ramp work set.

Why it ranks #7: The pair provides 880-pound combined capacity and folds to 37 inches, but the listing does not specifically establish van fit or motorcycle-only use.

A built-in carry handle and fold-down size of 37 by 8.75 inches make the DNA MOTORING ramp pair convenient to move and store in a car trunk or garage. Each 70-by-9-inch ramp supports 440 pounds, for an 880-pound capacity per pair.

The 70-inch length provides a loading path for listed uses including motorcycles, ATVs, mowers, and tractors, while the 9-inch width defines the track available to each wheel. The ramps fold for storage and the integrated handle supports carrying; an extended headboard attaches to the rear fender for a transition during loading and unloading. High-density polyethylene is the listed material, and the pair’s 880-pound rating is the load boundary.

Skip it if you need a higher-capacity pair; the Stalwart 75-CAR2025 is listed with 2,200 pounds combined capacity.

Choose this pair for portable loading and maintenance tasks when its 70-inch length and 880-pound capacity suit the equipment. The folding size and carry handle help with storage and transport, while the load rating remains the decisive boundary.

Listed on Amazon as: DNA Motoring Heavy Duty Folding Ramps, 880 lbs Capacity 70" x 9", Multi Use Ramp for Motorcycle, ATV, Lawn Mower, Tractor Loading and Maintenance, Home & Commercial, TOOLS-00819

#8

8. MAXIVAMN Aluminum Ramp

• Dimensions: 89"L x 12"W x 2"H
• Weight: 7.2 kg
• Load Capacity: 750 lb
• Material: Aluminum

Best for: Wide-path dirt-bike loading.

Why it ranks #8: The 89-inch aluminum single ramp has a 750-pound rating and a 12-inch loading surface, but its listing focuses on pickups and suitable trailers.

An 89-by-12-inch loading surface gives the MAXIVAMN ramp a defined, relatively wide wheel path for motorcycles and dirt bikes headed into a pickup or onto a suitable trailer. Its aluminum construction, 750-pound rating, and folding design make it a practical single-ramp option.

The 12-inch width gives the rider a broader stated surface than narrow single-track ramps, while the supplied guidance says to keep the tire centered and check tire width. At 89 inches extended, the ramp provides a loading path to a pickup or suitable trailer; its folding design supports storage between uses. Aluminum construction and a 750-pound rating define the material and load boundary, but this is one ramp, not a pair.

Skip it if you need two separate tracks for a four-wheeled vehicle; the Stalwart 75-CAR2025 supplies a set of two ramps.

Choose this single ramp for a compatible motorcycle or dirt bike when an 89-inch path and 750-pound rating fit your loading task. It is not a two-ramp set, and tire width and centered placement remain important considerations.

Listed on Amazon as: Motorcycle Ramp for Pickup Trucks, Aluminum Dirt Bike Ramp, 1 Pack

#9

9. VENDAV Motorcycle Ramp

• Dimensions: 89"L x 12"W x 2"H
• Weight: 18.2 lb
• Load Capacity: 750 lb
• Material: Aluminum

Best for: Welded aluminum bike ramp.

Why it ranks #9: This folding aluminum ramp measures 89 inches and is rated for 750 pounds, but the listed use is compatible pickup trucks and trailers.

Welded aluminum construction and a raised punch-plate surface define this VENDAV ramp, providing a grippy path for motorcycles and dirt bikes loaded into compatible pickups or trailers. The single ramp folds, measures 89 inches long by 12 inches wide, and has a 750-pound rating.

The 89-by-12-inch dimensions create a defined path for two-wheel equipment, while the punch-plate openings are specified to help provide tire grip during loading. Its folding format supports storage between jobs, and the aluminum construction keeps the listed ramp weight at 18.2 pounds. The 750-pound rating applies when the load is properly distributed and the ramp is positioned and secured correctly; this listing is for one ramp.

Skip it if you prioritize the lightest listed single-bike ramp; the Gorkett LR036ZD-6FT weighs 8.03 pounds and is rated for 440 pounds.

This suits riders who want a folding, 750-pound-rated aluminum ramp for a motorcycle or dirt bike and value its 12-inch width. It is a single ramp, and correct positioning, securing, and load distribution remain essential.

Listed on Amazon as: Dirt Bike & Motorcycle Ramp for Pickup Trucks, 1 Pack

#10

10. TaiH Leo 10-Foot Ramp

• Dimensions: 61.5"L x 17.7"W x 5.5"H
• Weight: 44 lb
• Load Capacity: 1500 lb
• Material: Aluminum

Best for: Long, wide single-ramp loading.

Why it ranks #10: The 120-inch aluminum ramp has a 1,500-pound rating, but it is a single wide pickup-truck ramp and the listing recommends two for many uses.

A 120-inch unfolded length and 17.7-inch width give the TaiH Leo ramp an unusually broad, extended loading surface for listed equipment such as motorcycles, dirt bikes, and ATVs. It folds to 61.5 inches and is rated for 1,500 pounds, with two pieces recommended.

The long, wide surface can provide a gradual, spacious path when the loading height and vehicle setup suit it, while the folded 61.5-inch length helps with storage. High-strength aluminum alloy is the listed material, and the stated 1,500-pound capacity sets the load limit. This is a single ramp; the product information recommends two pieces, an important practical point for loading vehicles that need separate wheel tracks.

Skip it if you want a supplied pair of folding ramps; the Stalwart 75-CAR2025 includes two tracks rated for 2,200 pounds combined.

This suits buyers seeking a long, wide aluminum ramp for compatible equipment and a loading setup that benefits from its 120-inch reach. Account for its single-ramp format, the recommendation to use two pieces, and its 44-pound listed weight.

Listed on Amazon as: 10FT Motorcycle Ramp for Pickup Trucks, 1PC Aluminum Ramps for ATV/Dirtbike