Best Motorcycle Hauler For RV: Compare 10 Hitch-Mount Racks

#1 · Best Overall

1. VEVOR Steel Motorcycle Carrier

• Load Capacity: 600 lb
• Material: Q235B Steel
• Compatible with Vehicle Type: Car

Best for: Long-ramp steel hauler.

Why it ranks #1: Its 600-pound capacity, 47-inch ramp, ratchet straps, and stabilizer make a well-equipped option for RV owners with a suitable 2-inch receiver.

A 47-inch loading ramp gives the VEVOR steel carrier a longer approach for rolling a motorcycle onto its 76-by-7-inch track. Its 600-pound capacity covers a broad range of bike weights, while the 2-inch hitch mount suits car and truck setups with the specified receiver.

The 47-inch ramp and spacious 76-by-7-inch track work together to make loading and positioning a bike more straightforward. Q235B steel and a 600-pound capacity provide a sturdy carrying platform, while the included ratchet straps and stabilizer help secure the load. At 61.7 pounds, the carrier itself is a substantial piece to handle during installation or storage. Check the recommended 7.87-to-19.7-inch installation height against your vehicle before setting up.

Skip it if you need a tilting ramp and support for tires up to 5.5 inches; the Mockins 83-inch carrier lists both.

This suits riders carrying a motorcycle on a car or truck with a 2-inch receiver who value a long ramp and wide track. Its 61.7-pound steel construction and specified installation-height range merit consideration.

Listed on Amazon as: VEVOR Motorcycle Carrier, 600 LBS Steel Motorcycle Carrier Hitch Mount with 47" Longer Ramp, Scooter Dirt Bike Trailer Hauler with Ratchet Straps and Stabilizer, for Car, Truck with 2" Hitch Receiver

#2 · Wide-Tire Pick

2. Black Widow Motorcycle Carrier

• Load Capacity: 600 lb
• Material: Aluminum
• Compatible with Vehicle Type: Trailer

Best for: Self-storing ramp hauler.

Why it ranks #2: It supports up to 600 pounds and tires up to 7.25 inches wide, with a 71-inch self-storing ramp and a 2-inch Class III or IV hitch fit.

A 71-inch ramp that stores directly on the carrier is the Black Widow’s most useful distinction, keeping the loading aid with the rack instead of requiring separate ramp storage. Its 600-pound capacity and stated compatibility with tires up to 7.25 inches wide suit varied motorcycle, dirt-bike, and scooter setups.

The self-storing ramp simplifies transport and storage by remaining attached to the carrier, while its 71-inch length provides a defined loading surface. A grit-coated track and ramp add traction during loading, and the carrier supports up to 600 pounds. The listed fit is a Class III or IV 2-inch hitch, with wheel widths up to 7.25 inches. At 98 pounds, the carrier is heavy to move and position, an important installation consideration.

Skip it if you need a carrier weighing less than 98 pounds; the VEVOR TD-1004-08 aluminum model lists a 68.3-pound weight.

This suits riders wanting an attached long ramp, traction surfaces, and stated support for tires up to 7.25 inches. Account for its 98-pound weight and Class III or IV 2-inch hitch requirement.

Listed on Amazon as: Black Widow Steel and Aluminum Motorcycle Hitch Carrier, 6 Ft Ramp, 600 lb

#3 · Self-Storing Ramp

3. VEVOR Aluminum Motorcycle Carrier

• Load Capacity: 600 lb
• Material: Aluminum
• Compatible with Vehicle Type: Scooter

Best for: Aluminum self-storing-ramp carrier.

Why it ranks #3: Its 600-pound capacity and 3.9-foot self-storing ramp suit buyers prioritizing ramp storage, though RV receiver compatibility still requires checking.

A 3.9-foot self-storing ramp pairs with aluminum construction on this VEVOR carrier, helping riders load without heavy lifting and keep the ramp attached when it is not in use. The carrier lists a 600-pound capacity and dimensions of 74.8 by 59.06 inches.

The self-storing ramp can be attached to the carrier between uses, reducing the need to manage a separate ramp during transport or storage. Aluminum construction distinguishes this model from the listed steel options, while the 600-pound load rating defines its stated capacity. At 68.3 pounds, the carrier still requires handling during installation. Its dimensions are 74.8 by 59.06 inches, so buyers should account for the platform footprint and their vehicle setup before use.

Skip it if you need support for tires up to 5.5 inches wide; the Mockins MA-HM-DBC-83-TLTS-96 lists that fit.

This suits riders seeking an aluminum carrier with an attached ramp and a 600-pound rating. Its 68.3-pound weight and broad 74.8-by-59.06-inch footprint are practical handling and storage considerations.

Listed on Amazon as: VEVOR Motorcycle Carrier, 600 LBS Aluminum Motorcycle Carrier Hitch Mount

#4 · Tilting Ramp

4. Mockins Tilting Motorcycle Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Car, Truck, Van

Best for: Wide-tire tilting-ramp carrier.

Why it ranks #4: The 500-pound carrier offers a tilting ramp, 83-inch frame, hitch stabilizer, hitch lock, and four ratchet straps for compatible vehicles.

A tilting ramp is the Mockins carrier’s key loading feature, easing the process of mounting and dismounting a bike. Its 83-inch-long, 6-inch-wide steel frame supports up to 500 pounds, and the listed tire clearance accommodates widths up to 5.5 inches for compatible motorcycles and e-bikes.

The tilting ramp and 83-inch frame support a loading workflow for light motorcycles, dirt bikes, scooters, and e-bikes, while the 500-pound capacity sets the load boundary. Tire widths up to 5.5 inches extend its usefulness to fat-tire bikes. The package also includes four heavy-duty ratchet straps, four loop straps, a hitch stabilizer, and a hitch lock, giving buyers several securing components together. It fits a 2-inch receiver and is listed for cars, trucks, and vans.

Skip it if you need a 600-pound capacity; the VEVOR TD-1004-03 steel carrier lists that higher limit.

Choose this for a 2-inch-receiver vehicle and a motorcycle or e-bike with tires up to 5.5 inches wide. Its 500-pound capacity is the key boundary when weighing heavier loads.

Listed on Amazon as: Mockins 83" Tilting Motorcycle Hitch Carrier with Ramp w/ 500 Lbs. Capacity

#5 · Strap Kit Included

5. RIGMEC Steel Motorcycle Carrier

• Load Capacity: 600 lb
• Material: Carbon Steel, Metal
• Compatible with Vehicle Type: Motorcycle

Best for: Anti-tilt steel carrier.

Why it ranks #5: This 600-pound steel carrier includes four ratchet straps and hook stabilizers, useful securing equipment for an RV owner with a compatible receiver.

An anti-tilt locking device is the RIGMEC carrier’s defining transport feature, paired with a longer ramp for loading motorcycles, scooters, and off-road dirt bikes. Its steel frame supports up to 600 pounds and fits cars or trucks with a 2-inch hitch receiver.

The anti-tilt locking device addresses carrier movement at the hitch, while the loading ramp supports rolling a bike onto the steel platform. The stated 600-pound capacity sets the maximum load, and the 77-by-32.5-by-5-inch dimensions define the carrier’s footprint. Four ratchet straps and hook stabilizers are also listed to help reduce wobbling and secure transport. The product description notes quick assembly, but buyers should still account for the carrier’s 19-kilogram weight when handling it.

Skip it if you need an aluminum carrier with a self-storing ramp; the VEVOR TD-1004-08 lists both features.

This fits car and truck owners seeking a 2-inch-receiver carrier with anti-tilt hardware, a ramp, and listed tie-downs. Its 600-pound capacity and 19-kilogram weight are key load and handling boundaries.

Listed on Amazon as: Motorcycle Carrier, 600 LBS Steel Motorcycle Carrier Hitch Mount with Longer Ramp, Scooter Dirt Bike Trailer Hauler, for Car, Truck with 2" Hitch Receiver

#6

6. ECOTRIC 500LB Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Vehicle with 2" square receiver (class II…

Best for: Broad receiver-class compatibility.

Why it ranks #6: It fits 2-inch square Class II through V receivers and includes a ramp, but its 500-pound limit leaves less capacity than 600-pound alternatives.

Compatibility with 2-inch square receivers across Class II, III, IV, and V hitches gives this ECOTRIC carrier an unusually broad stated hitch range. Its 500-pound capacity and ramp support a practical loading setup, while access from either side offers flexibility when vehicle or parking layout constrains approach.

The two-sided loading option lets riders choose an approach based on available space, while the included ramp helps roll a bike onto the frame. The 2-inch square receiver compatibility spans four listed hitch classes, making the carrier applicable to a wide range of vehicles with that receiver. Its high-strength steel frame is described as resisting flaking, scratching, fading, and wear. The 500-pound limit remains the key load ceiling for choosing a motorcycle.

Skip it if you need a 600-pound rating; the Goplus AT4338+XIN lists that capacity and a ramp.

This is a useful match for riders whose vehicle has a 2-inch square receiver and who value loading from either side. Keep its 500-pound limit in view when selecting a bike to carry.

Listed on Amazon as: ECOTRIC 500LB Hitch Mount Motorcycle Carrier Transportation Racks Hitch

#7

7. ECOTRIC 600LB Carrier

• Load Capacity: 600 lb
• Material: steel
• Compatible with Vehicle Type: Dirt Motorcycle

Best for: Rust-resistant steel carrier.

Why it ranks #7: Its steel construction and 600-pound stated capacity suit heavier bikes, but the supplied specifications provide little detail on ramp or restraint equipment.

A rustproof coating is the ECOTRIC carrier’s clearest differentiator, giving riders a steel platform intended to resist corrosion in rainy conditions. Its 600-pound capacity extends its stated carrying range beyond light bikes, making it a straightforward option for riders prioritizing a coated steel hitch carrier.

The steel construction and rustproof coating address two practical concerns together: supporting a motorcycle and protecting the carrier’s surface in wet weather. A 600-pound maximum capacity gives it a broad stated load limit, including some heavier motorcycles. The supplied information identifies it as a motorcycle carrier mount and lists dirt motorcycle compatibility, but does not specify ramp dimensions, receiver size, or included securing accessories. Buyers should account for those details when planning loading and transport.

Skip it if you want a specified self-storing ramp; the Black Widow SMC-600R includes a 71-inch ramp on its carrier.

This fits riders who want a coated steel carrier with a 600-pound capacity and a stated focus on dirt motorcycles. The product details provided leave ramp and accessory specifics unlisted, which matters for loading plans.

Listed on Amazon as: ECOTRIC 600LBS Black Motorcycle Carrier Mount Dirt Bike Rack Hitch Hauler |

#8

8. KODOM Dual Motorcycle Carrier

• Load Capacity: 600 LBS
• Material: Alloy Steel
• Compatible with Vehicle Type: Car, Truck

Best for: Strap-equipped steel hauler.

Why it ranks #8: The dual-rail design has a 600-pound capacity and includes straps and a stabilizer, but the listed vehicle fit is car and truck rather than RV.

Four ratchet straps and loop straps come with the KODOM carrier, giving riders multiple included tie-down pieces for securing a transported bike. Its alloy-steel frame carries up to 600 pounds, and the detachable ramp connects to the carrier’s right side for loading and storage.

The detachable ramp connects on the right side, giving the loading setup a defined position and a place to stow the ramp when not in use. Powder-coated steel is specified for corrosion resistance, while the 600-pound capacity sets the carrying limit. Four ratchet straps and loop straps, a hook stabilizer, and a storage bag are included, supporting a bundled securing workflow. The 75.1-by-53.6-inch dimensions and 39-kilogram weight call for planning installation and storage space.

Skip it if you need a listed carrier weight below 39 kilograms; the VEVOR TD-1004-08 aluminum model weighs 68.3 pounds.

This fits riders wanting a steel carrier with a detachable right-side ramp and a supplied tie-down set. Its 39-kilogram weight and 75.1-by-53.6-inch dimensions matter when handling and storing it.

Listed on Amazon as: Dual Motorcycle Hitch Carrier with Loading Ramp Heavy Duty Steel 600 Lbs Scooter Dirt Bike Trailer Hauler with Ratchet Straps and Stabilizer for Car, Truck

#9

9. Yoloyakidra Dual Motorcycle Carrier

• Load Capacity: 600 lb
• Material: Alloy Steel

Best for: Dual-rail 600-pound carrier.

Why it ranks #9: It lists a 600-pound capacity and detachable ramp, but provides no compatible vehicle type or carrier weight to help confirm an RV fit.

A reinforced steel frame and 600-pound capacity headline this Yoloyakidra dual-rail carrier, which is described as able to carry two motorcycles. Its detachable loading ramp can be connected to the carrier when not in use, combining a loading aid with a stated stowage option.

The dual-rail layout and stated two-motorcycle carrying capability make this a different kind of setup from a single-track carrier, subject to the listed 600-pound total capacity. The detachable ramp helps load bikes without heavy lifting and can connect to the carrier when unused. Alloy steel forms the frame, and the product dimensions are 75.1 by 53.6 by 2 inches. Those dimensions and the combined load ceiling are important to assess for the intended pair of motorcycles.

Skip it if you need a tilting ramp and 5.5-inch tire-width compatibility; the Mockins MA-HM-DBC-83-TLTS-96 lists both.

This targets riders who want a dual-rail carrier and intend to use its stated two-motorcycle capability. The 600-pound total limit and 75.1-by-53.6-inch footprint should guide load and space planning.

Listed on Amazon as: Heavy Duty Motorcycle Carrier Hitch Mount for 2 Bikes 600 LBS Load Capacity, Scooter Dirt Bike Trailer Hauler with Ramp, Ratchet Straps and Stabilizer

#10

10. Goplus Motorcycle Hitch Carrier

• Load Capacity: 600 lb
• Material: Steel
• Compatible with Vehicle Type: vehicle with 2" receiver

Best for: Wide-tire steel rack.

Why it ranks #10: Its 600-pound capacity and 2-inch receiver fit are relevant, but no RV compatibility is stated and the listing recommends staying below 55 MPH.

A stated fit for tires up to 7.5 inches wide gives the Goplus steel carrier room for particularly wide motorcycle tires. It also offers a 600-pound load capacity, a loading ramp, and two straps, forming a basic hitch-hauling package for vehicles with a 2-inch receiver.

The 7.5-inch tire-width limit helps buyers assess whether a wide-tire motorcycle can sit on the rack, while the 600-pound rating defines its load ceiling. A loading ramp supports rolling the bike onto the carrier, and two straps are included for securing it. Steel construction is described as strong and tough, with the supplied details advising against exceeding 55 mph while loaded and noting actual speed depends on motorcycle weight. It fits a 2-inch receiver.

Skip it if you need a supplied hitch stabilizer and lock; the Mockins MA-HM-DBC-83-TLTS-96 includes both.

This suits riders whose tires are within its 7.5-inch stated width limit and who need a ramp-equipped 2-inch-receiver rack. Its supplied 55-mph guidance is a relevant operating boundary.

Listed on Amazon as: Goplus Motorcycle Hitch Carrier, 600LBS Motorcycle Carrier Hitch Mount with 2 Straps, Loading Ramp, Dirt Bike Trailer, Heavy Duty Motor Cycle Rack, Fit Up to 7.5” Wide Tire