Best Lift Kits For Less for Silverado and Sierra 1500 Trucks

#1 · Best Overall

1. Rough Country 2-inch Leveling Kit

• Material: Polypropylene
• Material Type: Polypropylene

Best for: At-home two-inch leveling.

Why it ranks #1: Its 2-inch front leveling setup avoids strut disassembly, includes lower strut mount extensions, and is listed for Chevy/GMC 1500 trucks and SUVs.

Lower strut mount extensions let this Rough Country kit level the front with the rear without disassembling the struts. That bolt-on approach gives GM 1500 owners a simpler installation workflow, while the stated application also includes specified 2007–2021 SUVs and support from the manufacturer.

The kit uses two lower front strut mount extensions and mounting hardware, rather than requiring strut disassembly for installation. Its stated two-inch leveling goal and increased ground clearance address both stance and obstacle clearance, while Rough Country says the ride remains smooth and OEM-like. The listing says it works with any factory upper control arm type and can run up to a 32-inch tire. The buyer is responsible for checking fastener tightness after initial driving and periodically thereafter.

Skip it if you want a kit that includes rear lift components; this set supplies lower front strut mount extensions and hardware.

Choose this for a GM 1500 owner prioritizing a two-inch front level, no-strut-disassembly installation and stated OEM-like ride. Its scope is front leveling, so buyers seeking a multi-component front-and-rear lift should look elsewhere.

Listed on Amazon as: Rough Country 2" Leveling Kit for 2007-2018 Chevy/GMC 1500 | 07-21 SUV – 1307

#2 · Best Front Lift

2. KSP 3-inch Front Leveling Kit

• Material: Aluminum
• Material Type: Aluminum

Best for: Forged-aluminum three-inch front.

Why it ranks #2: Raises the front 3 inches and uses forged aircraft-grade aluminum with 12.9-grade bolts; the listing covers 2007–2026 Silverado and Sierra 1500 models.

A forged aircraft-grade aluminum spacer and 12.9-grade solid bolts support this KSP kit’s stated three-inch front raise. The listing covers new-body-style Silverado 1500 and Sierra 1500 trucks in 2WD and 4WD from 2007–2026, making it a front-leveling option with a clear alignment note.

The forged aluminum construction and solid 12.9-grade bolts are presented as safety features for demanding riding conditions, while the powder-coated finish is also specified. Its three-inch figure describes the front raise, not a matching rear lift, so buyers seeking a complete front-and-rear height change should account for that scope. KSP recommends alignment after installation, a practical step to include in the suspension-modification workflow. The kit includes strut spacers.

Skip it if you need rear lift components in the same kit; the supplied contents identify strut spacers only.

Choose this for a listed new-body-style Silverado or Sierra 1500 owner seeking a three-inch front raise with forged aluminum spacers.

Listed on Amazon as: KSP 3" Front Leveling Kits for Silverado 1500 2WD/4WD 2007-2026, Sierra 2WD/4WD 2007-2026, 3 Inch Suspension Strut Spacers Lift Kits for Pickup with 6 Lug

#3 · Best Two-End Lift

3. EVIL ENERGY 3-inch Front and 2-inch Rear Kit

• Material: Aluminum
• Material Type: Aluminum

Best for: Precision-machined front-and-rear.

Why it ranks #3: Combines 3 inches of front lift with a 2-inch rear lift and lists compatibility with Silverado and Sierra 1500 2WD and 4WD models.

CNC processing of forged 6061-T6 aluminum is the defining feature of this EVIL ENERGY kit, which specifies three inches of front lift and two inches at the rear. Its listing covers Silverado 1500 models from 2007–2024 and Sierra 1500 models from 2007–2023 in 2WD and 4WD.

The forged 6061-T6 aluminum and CNC processing are described as supporting strength, durability and accurate hole positioning, which the listing connects with installation precision. Anodized and heat-treated 12.9-grade bolts add the stated corrosion-resistance feature. The three-inch front and two-inch rear figures give buyers a specific stance profile, rather than an equal lift at both ends. Fitment is listed for 2WD and 4WD Silverado 1500 through 2024 and Sierra 1500 through 2023.

Skip it if you want equal front and rear lift; this kit specifies three inches in front and two inches at the rear.

This suits Silverado or Sierra 1500 owners in the listed year ranges who want a three-front, two-rear lift and value machined aluminum components. Note the unequal lift and the different final model year listed for Sierra.

Listed on Amazon as: EVIL ENERGY 3" Front and 2" Rear Leveling Lift Kits, Red

#4 · Best Fitment Notes

4. dynofit 3-inch Front and 2-inch Rear Kit

• Material: Aluminum, Carbon Steel
• Material Type: Aluminum, Carbon Steel

Best for: Six-lug front-and-rear lift.

Why it ranks #4: Includes front spacers, rear blocks, U-bolts, and hardware, with specific new-body-style and 6-lug restrictions spelled out for later models.

This dynofit kit combines a three-inch front leveling kit with rear blocks for a stated three-inch-front, two-inch-rear setup. Its 2WD and 4WD coverage targets six-lug Silverado and Sierra 1500 trucks, while explicit new-body-style and trim restrictions narrow the listed fitment.

The included front leveling components, rear blocks, U-bolts, lug bolts and washers make this a multi-part front-and-rear package rather than a front spacer alone. For 2007–2018 models, the listing explains that a three-inch physical rear block yields a true two-inch rear lift because the factory block is one inch thick. The stated 2019–2024 fitment is new-body-style only and excludes MONO-LEAF, AT4 and TrailBoss trucks, so model year alone is not enough to establish compatibility.

Skip it if you have a 2019–2024 MONO-LEAF, AT4 or TrailBoss truck; those configurations are expressly excluded.

This suits six-lug Silverado or Sierra 1500 owners seeking a combined front-and-rear lift and willing to check the detailed year and trim limits. Its newer-model application is restricted to specified configurations.

Listed on Amazon as: Dynofit Lift Kits for Chevy Silverado 1500, Chassis lifted 3"Front &2" Rear

#5

5. FLYCLE 3-inch Front and 2-inch Rear Kit

• Material: Aluminum
• Material Type: Aluminum

Best for: Three-front, two-rear lift.

Why it ranks #5: Offers a clearly stated 3-inch front and 2-inch rear lift for listed Silverado and Sierra 1500 pickups, with aluminum construction and a two-year warranty.

A stated three-inch front raise paired with a two-inch rear raise gives this FLYCLE kit a defined front-to-rear lift profile. Aluminum strut spacers are listed for Silverado 1500 and Sierra 1500 pickups from 2007–2024 in 2WD and 4WD, with kit thickness not equal to lift height.

The different front and rear lift figures let buyers target a raised stance without treating the kit as a level front-only spacer. FLYCLE lists aluminum construction and compatibility with Silverado 1500 and Sierra 1500 pickups in both 2WD and 4WD. The listing cautions that suspension geometry means spacer thickness and resulting lift are not a one-to-one ratio, so physical kit dimensions should not be used alone to estimate ride height. The stated rear lift is two inches.

Skip it if you want the rear raised as much as the front; this kit specifies three inches front and two inches rear.

A fit for Silverado or Sierra 1500 pickup owners seeking a three-inch front and two-inch rear change in 2WD or 4WD. Keep the unequal lift figures and non-one-to-one spacer geometry in mind when choosing a target stance.

Listed on Amazon as: 3" Front and 2" Rear Leveling Kit for 2007-2024 Silverado 1500 Sierra 1500 2WD/4WD,3 inch Front and 2 inch Rear Strut Spacers Lift Kit

#6

6. MAXRACING 2.5-inch Leveling Kit

• Material: Aluminum
• Material Type: Aluminum

Best for: Billet-aluminum front leveling.

Why it ranks #6: Provides a 2.5-inch front lift using an aluminum strut spacer, but excludes several trims and configurations, including Denali, ZR2, TrailBoss, and MagneRide.

A stated 2.5-inch front raise from a CNC-machined billet-aluminum strut spacer gives Silverado and Sierra owners a clear way to level the truck’s stance. The kit includes installation hardware and a guide, while its broad listed vehicle range comes with several important trim and body-style exclusions.

The spacer is about 1.2 inches thick, but the stated lift is 2.5 inches because kit thickness and lift height are not a one-to-one measurement. That distinction helps set expectations when comparing spacer dimensions with the intended stance change. Listed compatibility includes Silverado 1500 and Sierra 1500 models in 2WD and 4WD, plus Tahoe, Avalanche 1500, Suburban 1500 and Yukon 1500. Denali, ZR2, TrailBoss, AT4, MagneRide and specified body styles are excluded.

Skip it if you own a listed excluded trim or body style; the stated application does not cover every Silverado or Sierra.

This suits owners of listed Silverado 1500, Sierra 1500 or compatible SUVs seeking a 2.5-inch front raise with an aluminum spacer. Check the extensive exclusions carefully; it is not a universal fit across the named model families.

Listed on Amazon as: 2.5" Leveling Lift Kit Compatible with 2007-2026 Silverado Sierra

#7

7. Amumu 3.5-inch Front and 3-inch Rear Kit

• Material: Aluminum
• Material Type: Aluminum

Best for: Mixed-material 3.5-inch front.

Why it ranks #7: Includes front strut spacers, rear lift blocks, U-bolts, and hardware for a 3.5-inch front and 3-inch rear lift on listed Silverado and Sierra models.

A stated 3.5-inch front raise and three-inch rear raise give this Amumu kit a distinct front-and-rear lift profile for 2007–2019 Silverado and Sierra 1500 trucks. Its component list combines billet aluminum and Delrin front spacers with steel rear blocks and square-bend U-bolts.

The T6 billet aluminum top strut spacers and high-density Delrin bottom spacers form the listed front components, while high-strength steel tapered blocks address the rear. Four square-bend U-bolts and installation hardware are also included, giving buyers a package that covers both ends of the stated lift. The listing specifies 2WD and 4WD fitment across the named 2007–2019 model years. Its 3.5-inch front and three-inch rear figures mean the lift is not equal front to rear.

Skip it if you need a level front-to-rear lift or a model beyond 2019; the listed figures and fitment do not cover those needs.

This fits owners of listed 2007–2019 Silverado or Sierra 1500 trucks seeking a mixed-material front-and-rear lift. Consider the half-inch difference between front and rear lift, and note the stated year range ends at 2019.

Listed on Amazon as: 3.5" Front 3" Rear Leveling Lift Kit – Suspension Lift Kit Compatible with 2007-2019 Chevrolet Silverado 1500 GMC Sierra 1500 2WD 4WD

#8

8. FlexHitch 3.5-inch Front and 3-inch Rear Kit

• Material: Aluminum, Carbon Steel
• Material Type: Aluminum, Carbon Steel

Best for: Three-and-a-half-inch front lift.

Why it ranks #8: Provides front and rear lift components, but its fitment excludes several trims and the listing recommends upper control arms suited to 2- to 4-inch lifts.

A 3.5-inch front lift combined with a three-inch rear lift gives this FlexHitch kit a larger, nearly matched stance change. Its listed components include front spacers, rear leaf-spring blocks and shock extensions, while fitment varies by year, drivetrain and excluded trim.

The front lift uses two components working together, and the package lists both front strut and lower strut spacers. Rear leaf-spring lift blocks and U-bolts address the back, while rear shock extensions are also included. FlexHitch recommends upper control arms adapted for two-to-four-inch lifts to support smooth installation and driving. Fitment includes 2007–2018 Silverado and Sierra 1500 in 2WD/4WD, plus specified 2019–2024 2WD models; Classic, ZR2, TrailBoss, Denali, AT4 and MagneRide applications are excluded.

Skip it if you cannot use the recommended adapted upper control arms; the listing advises them for this lift range.

This suits owners of listed Silverado or Sierra 1500 configurations seeking a substantial front-and-rear lift with included rear blocks. Check the drivetrain and trim exclusions, and account for the recommended adapted upper control arms.

Listed on Amazon as: 3.5" Front 3" Rear Lift kit for 2007-2018 Silverado 1500 Sierra 1500 2/4WD

#9

9. GSTP 3-inch Front and Rear Kit

• Material: Metal
• Material Type: Metal

Best for: Three-inch 4WD suspension lift.

Why it ranks #9: Lists a 3-inch front-and-rear suspension lift with strut spacers and shock extenders for 1999–2007 Silverado and Sierra 1500 4WD trucks.

A stated three-inch lift at both the front and rear makes this GSTP kit a straightforward option for owners seeking a more even raised stance. Its title specifies Chevy Silverado and GMC Sierra 1500 4X4 and 4WD applications from 1999–2007, with strut spacers and shock extenders included in the description.

The listed front-and-rear three-inch lift gives buyers a defined target for changing the truck’s stance, rather than a front-only leveling figure. The title names strut spacers and shock extenders, components associated with the suspension lift described. Its stated application is limited to Silverado and Sierra 1500 4X4/4WD vehicles from 1999–2007; the supplied details do not give additional fitment breakdowns or installation guidance. The specifications identify metal construction and list no manufacturer warranty.

Skip it if you need a documented 2WD application or detailed installation guidance; the supplied listing identifies 4X4/4WD fitment only.

This is for owners of the specified 1999–2007 Silverado or Sierra 1500 4X4/4WD seeking a three-inch front-and-rear lift. The supplied information is limited, so buyers needing broader fitment detail should consider that boundary.

Listed on Amazon as: 3" Front and Rear Suspension Lift Kit Compatible With Chevy Silverado GMC Sierra 1500 4X4 4WD 1999-2007- Leveling Lift Kits with Strut Spacer and Shock Extenders

#10 · Highest Lift

10. Rough Country 6-inch Lift Kit

• Material: Alloy Steel, Aluminum, Rubber, Zinc
• Material Type: Alloy Steel, Aluminum, Rubber, Zinc

Best for: Six-inch 4WD trail clearance.

Why it ranks #10: Its 6-inch suspension setup includes N3 shocks, crossmembers, skid plate, and lifted knuckles, making it a much larger system than a modest leveling kit.

A six-inch suspension lift paired with N3 shocks targets 1999–2006 and Classic Silverado or Sierra 1500 4WD owners seeking added clearance. The kit combines lifted knuckles, crossmembers, skid plate and other suspension hardware, while its shock specification emphasizes variable valving and heat management.

The N3 shocks use 10-stage variable valving, a 54 mm body and military-spec fluid rated to minus 40°C; those details support the listed all-weather durability and heat-dissipation aims. The kit also includes lifted knuckles, coil spring spacers, CV spacers, fabricated lift blocks, crossmembers and a skid plate, giving the six-inch lift a broad component scope. Rough Country says it maintains factory-like ride quality and reuses original travel stops. Its 4WD and older-model fitment is specific.

Skip it if you have a 2WD truck or a model outside the listed 1999–2006 and Classic range; this kit is specified for 4WD.

This is for owners of the specified older Silverado or Sierra 1500 4WD seeking six inches of lift and the included N3 shocks. Its application is much narrower than newer-model leveling kits, so verify the listed vehicle range.

Listed on Amazon as: Rough Country 6" Lift Kit with N3 Shocks for Chevy Silverado & GMC Sierra 1500 4WD (1999-2006 & Classic) – Increased Clearance, Aggressive Look